Undesired noise and vibrations have a detrimental effect in many areas. Hence the control of vibrations has become a relevant technological challenge. Active vibration control of structures using smart materials especially is in vogue. It involves sensing the motion of the structure using sensors, generating a control signal using a controller and applying a control force on the structure using actuators. To design the control system of any vibrating structure, the mathematical model of the system is required. However, it is not possible, to theoretically construct the model of complex structures. On the other hand, it is relatively simpler to model such systems in an Finite Element (FE) environment like ANSYS©. This paper deals with the extraction of the mathematical model of a cantilever beam from its FEA model. This procedure of extraction is applicable to any mechanical system under dynamics study. Then again, the matrices thus formed are usually very large and require a lot of computational time to process. Hence an attempt is made to construct the reduced model of the system which approximates the actual model to the desired extent. In this paper, the full model of the beam is reduced by discarding those modes which do not contribute to the overall response on the basis of their dc gains in MATLAB©. It is found that the frequency and transient responses of the full and reduced models match closely. Hence the reduced model may be used to represent the system instead of the full model with reasonable accuracy. Design of controller is attempted using the theory of state and output feedback control laws. The controller is modeled by calculating the optimal control gain by formulating an algorithm to solve the equations involved. The transient and frequency responses of the controlled full model and reduced models are then plotted. The procedure for designing controller described in this paper may be extended to any real world system.
Skip Nav Destination
ASME 2013 International Mechanical Engineering Congress and Exposition
November 15–21, 2013
San Diego, California, USA
Conference Sponsors:
- ASME
ISBN:
978-0-7918-5625-3
PROCEEDINGS PAPER
Simulation Study of Active Vibration Control of Cantilever Beam by Using State and Output Feedback Control Laws Available to Purchase
S. M. Khot,
S. M. Khot
Fr.C.Rodrigues Institute of Technology, Mumbai, India
Search for other works by this author on:
Nitesh P. Yelve,
Nitesh P. Yelve
Fr.C.Rodrigues Institute of Technology, Mumbai, India
Search for other works by this author on:
Raj Nair
Raj Nair
University of Colorado at Boulder, Boulder, CO
Search for other works by this author on:
S. M. Khot
Fr.C.Rodrigues Institute of Technology, Mumbai, India
Nitesh P. Yelve
Fr.C.Rodrigues Institute of Technology, Mumbai, India
Raj Nair
University of Colorado at Boulder, Boulder, CO
Paper No:
IMECE2013-64041, V04BT04A055; 12 pages
Published Online:
April 2, 2014
Citation
Khot, SM, Yelve, NP, & Nair, R. "Simulation Study of Active Vibration Control of Cantilever Beam by Using State and Output Feedback Control Laws." Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition. Volume 4B: Dynamics, Vibration and Control. San Diego, California, USA. November 15–21, 2013. V04BT04A055. ASME. https://doi.org/10.1115/IMECE2013-64041
Download citation file:
15
Views
Related Proceedings Papers
Related Articles
Using Constrained Bilinear Quadratic Regulator for the Optimal Semi-Active Control Problem
J. Dyn. Sys., Meas., Control (November,2017)
A Switching Scheme for Mixed PZT-Based/Jet Thrusters Control of a Large Flexible Structure
J. Dyn. Sys., Meas., Control (December,2001)
Brachistochrone on a 1D Curved Surface Using Optimal Control
J. Dyn. Sys., Meas., Control (May,2010)
Related Chapters
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Research on Energy-Saving Optimal Control for Trains in a Following Operation under a Moving Autoblock System Based on GA
International Conference on Computer Engineering and Technology, 3rd (ICCET 2011)