A Numerical Study of Laminar and Turbulent Natural Convective Heat Transfer From an Isothermal Vertical Plate With a Wavy Surface

Natural convective heat transfer from a wide isothermal plate which has a wavy surface, i.e., has a surface which periodically rises and falls, has been numerically studied. The main purpose of the study was to examine the effect of the surface waviness on the conditions under which transition from laminar to turbulent flow occurred and to study the effect of the surface waviness on the heat transfer rate. The surface waves, which have a saw-tooth cross-sectional shape, are normal to the direction of flow over the surface and have a relatively small amplitude. The range of Rayleigh numbers considered in the present study extends from values that for a non-wavy plate would be associated with laminar flow to values that would be associated with fully turbulent flow. The flow has been assumed to be steady and fluid properties have been assumed constant except for the density change with temperature that gives rise to the buoyancy forces, this being treated by means of the Boussinesq type approximation. A standard k-epsilon turbulence model with full account being taken of the effects of the buoyancy forces has been used in obtaining the solution. The solution has been obtained using the commercial CFD solver FLUENT. The solution has the following parameters: the Rayleigh number based on the plate height, the Prandtl number, the dimensionless amplitude of the surface waviness, and the dimensionless pitch of the surface waviness. Results have been obtained for a Prandtl number of 0.7 and for a single dimensionless pitch value for Rayleigh numbers between approximately 10⁶ and 10¹². The effects of Rayleigh number and dimensionless amplitude on the mean heat transfer rate have been studied. It is convenient in presenting the results to introduce two mean heat transfer rates, one based on the total surface area and the other based on the projected frontal area of the surface.