Topology optimization has been used to maximize the damping performance of constrained damping layer structures with viscoelastic core [1-3]. Studies show that using nanotubes as reinforcements in polymer material might improve the damping and stiffness properties [4,5]. Experimental investigations using nanotube reinforcements in constrained damping layers showed a significant improvement in damping properties of the structure [6]. Optimizing the topology of structures involving nanotube reinforcements can further enhance the damping properties by making optimal use of the nanotubes as reinforcements. In preliminary studies performed with volume fraction of nanotubes as a design variable in the optimization [7,8] substantial improvements in the damping properties were observed. In this work, the topology of a cantilever beam structure involving nanotube reinforced polymer layers is optimized with the objective of maximizing the system loss factor for the first resonance frequency of the base beam. The volume fractions and orientations of the nanotubes in each finite element and the material fraction of the nanotube reinforced polymer (NRP) and the elastic material are the design variables in the optimization process. ABAQUS is used for the finite element modeling and an optimization code NLPQL which uses a sequential quadratic programming algorithm is used for the optimization.

1.
Lumsdaine A., 2002, “Topology Optimization of Constrained Damping Layer Treatments,” ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana. IMECE2002-39021.
2.
Lumsdaine A. and Pai R., “Design of Constrained Layer Damping Topologies,” 2003, Proceedings of the Adaptive Structures and Material Systems Symposium of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D.C.
3.
Pai R, Lumsdaine A. and Parsons M., 2004 “Design and Fabrication of Optimal Constrained Layer Damping Topologies,” Proceedings of the SPIE 11th Annual Symposium on Smart Structures and Materials, San Diego, CA,
4.
Zhou X., Shin E., Wang K. W., and Bakis C., 2003, “Damping Characteristics of Nanotube Based Composites,” ASME 2003 Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Chicago, IL.
5.
Zhou X., Wang K. W., and Bakis C, 2004 “The Investigation of Carbon Nanotube Based Polymers for Improved Structural Damping,” Proceedings of the SPIE 11th Annual Symposium on Smart Structures and Materials, San Diego, CA, 5386-18.
6.
Koraktar
N. A.
,
Wei
Bingqing
, and
Pulickel
M. A
, 2003, “
Multifunctional structural reinforcement featuring carbon nanotube films
”,
Composite Science and Technology
.
63
, pp.
1525
1531
.
7.
Damu M., Lumsdaine, A., and Parsons M, 2005 “Topology Optimization of Carbon Nanotube Reinforced Constrained Damping Layers”, Proceedings of the SPIE 12th Annual Symposium on Smart Structures and Materials, San Diego, CA.
8.
Damu M.,and Lumsdaine. A.,2005, “Topology Optimization of Carbon Nanotube Reinforced Damping Layers”, ASME International Mechanical Engineering Congress & Exposition, Orlando, Florida. IMECE2005-80569.
9.
Ioana
C.
,
Finegan
Gary
,
Tibbetts
G.
, and
Ronald
F. Gibson
,
2003
, “
Modeling and characterization of damping in carbon nanofiber/polypropylene composites
”,
Composite Science and Technology.
,
63
, pp
1629
1635
.
10.
Rios O., Fuentes A. A., Lozano K., Barrera E. V., and Brotzen F. R., 2002, “Dynamical Mechanical Study of Single Wall Nanotube Reinforced ABS Composites.” Antec 2002, T 46: 3599–3603.
11.
Huang
J. H.
,
2001
, “
Some closed-form solutions for effective moduli of composites containing randomly oriented short fibers
”,
Materials Science and Engineering
,
A315
, pp.
11
20
.
12.
Thostenson
E. T.
and
Chou
T. W.
2003
On The Elastic Properties of Carbon Nanotube-Based Composites: Modelling and Characterization
”,
Journal of Physics D: Applied Physics.
Vol
36
pp
573
582
.
13.
Sun
C. T.
.,
Chaturvedi
S. K.
and
Gibson
R. F
, “
Internal Damping of Short-Fiber Reinforced Polymer Matrix Composites
”,
Computers and Structures
. Vol.
20
No
1–3
pp
391
400
.
1985
.
14.
Liu
Y. J.
and
Chen
X. L.
,
2003
, “
Continuum Models of Carbon Nanotube-Based Composites Using the Boundary Element Method
,”
Electronic Journal of Boundary Elements
,
1
(
2)
, pp.
316
335
.
15.
Ross D., Ungar E. Eric and Kerwin E.M. Jr., 1959, “Damping of Plate Flexural Vibrations by Means of Viscoelastic Laminae,” Structural Damping: Colloquium on Structural Damping, ASME Annual Meeting.
16.
Ungar E.E and Ross. D. 1959 “Damping of Flexural Vibration by Alternate Viscoelastic and Elastic Layers,” Proceedings of the Fourth Conference on Solid Mechanics, Unversity of Texas, Austin, Texas.
17.
Plunkett
R.
, and
Lee
C. T.
,
1970
, “
Length Optimization for Constrained Viscoelastic Layer Damping
”.
The Journal of the Acoustical Society of America
,
48
(
1)
, pp.
150
161
.
18.
Lin, T.-C. and Scott, R. A., “Shape Optimization of Damping Layers,” Proceedings of the 58th Shock and Vibration Symposium, Huntsville, Alabama, Vol. 1, pp. 395–409, 1987.
19.
Hajela
P.
, and
Lin
C. Y.
,
1991
, “
Optimal Design of Viscoelastically Damped Beam Structures
”,
Applied Mechanics Review
,
44
(
11)
- 2, pp.
S96–S106
S96–S106
.
20.
Lumsdaine
A.
and
Scott
R. A.
,
1998
, “
Shape Optimization of Unconstrained Viscoelastic Layers Using Continuum Finite Elements
.”
Journal of Sound and Vibration
,
216
(
1)
, pp.
29
52
.
21.
Lumsdaine A., and Scott R.A., 1996, “Optimal Design of Constrained Plate Damping Layers Using Continuum Finite Elements”, Proceedings of the International Symposium on Advanced Materials for Vibro-Acoustic Application, 1996 American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Atlanta, GA, pp. 159–168.
22.
Liu
Q.
and
Chattopadhyay
A.
,
2000
, “
Improved Helicopter Aeromechanical Stability Analysis Using Segmented Constrained Layer Damping and Hybrid Optimization
,”
Journal of Intelligent Material Systems and Structures
,
11
(
6)
pp.
492
500
.
23.
Bendsoe
M. P.
, and
Kikuchi
N.
, “
Generating Optimal Topologies in Structural Design using a Homogenization Method
,”
Computer Methods in Applied Mechanics and Engineering
, Vol.
71
, No.
2
, pp.
197
224
,
1988
.
24.
Gibson
R. F.
,
Chaturvedi
S. K.
and
Sun
C. T.
1982
Complex Moduli of Aligned Discontinuous Fiber-Reinforced Polymer Composites
”,
Journal of Material Science
. Vol.
17
pp
3499
3509
.
25.
S.A. Suarez, R.F. Gibson, C.T. Sun, and S.K. Chaturvedi, “The Influence of Fiber Length and Fiber Orientation on Damping and Stiffness of Polymer Composite Materials”, SEM Spring Conference on Experimental Mechanics. Las Vegas, NV, 1985.
26.
Alberts
T. E.
and
Xia
H.
1995
Design and Analysis of Fiber Enhanced Viscoelastic Damping Polymers
”,
Journal of Vibration and Acoustics
. Vol.
117
, pp
398
404
.
27.
Schittkowski
K.
,
1986
, “
NLPQL: A FORTRAN Subroutine for Solving Constrained Non-linear Programming Problems
,”
Annals of Operations Research
,
5
, pp.
485
500
.
28.
Ungar
E. E.
and
Kerwin
E. M.
,
1962
Loss Factors of Viscoelastic Systems in Terms of Energy Concepts
,”
Journal of the Acoustical Society of America
,
34
, pp.
954
957
.
29.
Johnson
C. D.
and
Kienholz
D. A.
,
1981
, “
Finite Element Prediction of Damping in Structures with Constrained Viscoelastic Layers
,”
AIAA Journal
,
20
(
9)
, pp.
1284
1290
.
30.
Xu
Y.
,
Liu
Y.
, and
Wang
B.
,
2002
, “
Revised Modal Strain Energy Method for Finite Element Analysis of Viscoelastic Damping Treated Structures
,”
Proceedings of the SPIE 9th Annual Symposium on Smart Structures and Materials
,
4697
, pp.
35
42
, San Diego, CA.
This content is only available via PDF.
You do not currently have access to this content.