This paper deals with a two-dimensional stress analysis of adhesive butt joints under static tensile loading and bending moments in order to contribute to an establishment of the fracture criteria of joints. Similar adherends and an adhesive bond are replaced with finite strips in the analyses. Stress distributions in adhesive joints are analyzed strictly by using the two-dimensional theory of elasticity. The effects of stiffness and thickness of adhesive bonds on the stress distributions at the interfaces are shown by numerical computations. It is found that the stress singularity occurs at the ends of the interfaces. For verification, experiments to measure the strains and the strength were carried out. The analytical results are in fairly good agreement with the experimental ones. In addition, the analytical result is also compared with the result obtained by F.E.M in order to verify the stress distributions at the interfaces. It is shown that are in a fairly good agreement.
Skip Nav Destination
ASME 2005 International Mechanical Engineering Congress and Exposition
November 5–11, 2005
Orlando, Florida, USA
Conference Sponsors:
- Design Engineering Division
ISBN:
0-7918-4215-0
PROCEEDINGS PAPER
Two-Dimensional Stress Analysis and the Strength Estimation of Adhesive Butt Joints Under Static Tensile Loadings and Bending Moments
Yosuke Akita
Yosuke Akita
University of Hiroshima
Search for other works by this author on:
Toshiyuki Sawa
University of Hiroshima
Yosuke Akita
University of Hiroshima
Paper No:
IMECE2005-80362, pp. 741-747; 7 pages
Published Online:
February 5, 2008
Citation
Sawa, T, & Akita, Y. "Two-Dimensional Stress Analysis and the Strength Estimation of Adhesive Butt Joints Under Static Tensile Loadings and Bending Moments." Proceedings of the ASME 2005 International Mechanical Engineering Congress and Exposition. Design Engineering, Parts A and B. Orlando, Florida, USA. November 5–11, 2005. pp. 741-747. ASME. https://doi.org/10.1115/IMECE2005-80362
Download citation file:
5
Views
Related Proceedings Papers
Related Articles
On Some Anomalies in Lame´’s Solutions for Elastic Solids With Holes
J. Appl. Mech (January,2001)
A State-Space-Based Stress Analysis of a Multilayered Spherical Shell With Spherical Isotropy
J. Appl. Mech (January,2001)
A Semi-Infinite Strip Pressed Against an Elastic Half-Plane With Frictional Slip
J. Appl. Mech (June,2018)
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Analysis of Components: Strain- and Deformation-Controlled Limits
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Interface with Stationary Equipment
Pipe Stress Engineering