A series of experimental investigations with stringent measurement methods on the studies related to mixed convection from the horizontally confined extended surfaces with a slot jet impingement have been successfully conducted. The relevant parameters influencing mixed convection performance due to jet impingement and buoyancy include the Grashof number, ratio of jet separation distance to nozzle width, ratio of extended surfaces height to nozzle width and jet Reynolds number. The range of these parameters studied are Grs = 3.77 × 105 – 1.84 × 106, H/W = 1–10, Hs/W = 0.74–3.40 and Re = 63–1383. In the study, the heat transfer behavior on the extended surfaces with confined slot jet impingement such as the temperature distribution, local and average Nusselt numbers on the extended surfaces has been systematically explored. The results manifest that the effect of steady-state Grashof number on heat transfer behavior such as stagnation, local and average Nusselt number is not significant; while the heat transfer performance increases with decreasing jet separation distance or with increasing extended surface height and jet Reynolds number. Besides, two new correlations of local and average Nusselt numbers in terms of H/W, Hs/W and Re are proposed for the cases of extended surfaces. A satisfactory agreement is achieved between the results predicted by these correlations and the experimental data. Finally, a complete composite correlation of steady-state average Nusselt number for mixed convection due to jet impingement and buoyancy is proposed. The comparison of the predictions evaluated by this correlation with all the present experimental data is made. The maximum and average deviations of the predictions from the experimental data are 7.46% and 2.87%, respectively.
Skip Nav Destination
ASME 2004 International Mechanical Engineering Congress and Exposition
November 13–19, 2004
Anaheim, California, USA
Conference Sponsors:
- Heat Transfer Division
ISBN:
0-7918-4711-X
PROCEEDINGS PAPER
Convective Heat Transfer From Heated Extended Surfaces With a Confined Slot Jet Impingement Available to Purchase
Y. H. Hung
Y. H. Hung
National Tsing Hua University
Search for other works by this author on:
L. K. Liu
National Tsing Hua University
M. C. Wu
National Tsing Hua University
C. J. Fang
National Tsing Hua University
Y. H. Hung
National Tsing Hua University
Paper No:
IMECE2004-61442, pp. 241-248; 8 pages
Published Online:
March 24, 2008
Citation
Liu, LK, Wu, MC, Fang, CJ, & Hung, YH. "Convective Heat Transfer From Heated Extended Surfaces With a Confined Slot Jet Impingement." Proceedings of the ASME 2004 International Mechanical Engineering Congress and Exposition. Heat Transfer, Volume 2. Anaheim, California, USA. November 13–19, 2004. pp. 241-248. ASME. https://doi.org/10.1115/IMECE2004-61442
Download citation file:
9
Views
Related Proceedings Papers
Related Articles
Three-Dimensional Heat Transfer of a Confined Circular Impinging Jet With Buoyancy Effects
J. Heat Transfer (April,2003)
Cooling Performance of Using a Confined Slot Jet Impinging onto Heated Heat Sinks
J. Electron. Packag (March,2006)
Experimental Studies and Correlations of Radially Outward and Inward Air-Flow Heat Transfer in a Rotating Square Duct
J. Heat Transfer (February,1996)
Related Chapters
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Mixed-Up Convection
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Radiation
Thermal Management of Microelectronic Equipment