Strength characterization and analysis of fracture size effect in ultrananocrystalline diamond (UNCD) thin films are presented. In this work, we report the changes in mechanical properties of UNCD by the addition of nitrogen gas to the Ar/CH4 microwave plasma. Both undoped and doped UNCD films show a decrease in fracture strength with an increase in specimen size. The strength data, obtained by using the membrane deflection experiment (MDE) developed at Nothwestern University, is interpreted using Weibull statistics. The capability of the theory is examined in conjunction with detailed fractographic analysis. The Weibull parameters are estimated by maximum likelihood estimation (MLE) based on 480 tests when the specimen volume varies from 500 to 1600 cubic microns. The results show that one can predict the fracture strength of a component possessing any arbitrary volume to within ±3% from the fracture strength identified from the tested specimens. The failure mode of UNCD is suggested to be volume controlled.
Skip Nav Destination
ASME 2004 International Mechanical Engineering Congress and Exposition
November 13–19, 2004
Anaheim, California, USA
Conference Sponsors:
- Applied Mechanics Division
ISBN:
0-7918-4702-0
PROCEEDINGS PAPER
Fracture Size Effect in Ultrananocrystalline Diamond: Weibull Theory Applicability Available to Purchase
H. D. Espinosa
H. D. Espinosa
Northwestern University
Search for other works by this author on:
B. Peng
Northwestern University
H. D. Espinosa
Northwestern University
Paper No:
IMECE2004-60070, pp. 341-345; 5 pages
Published Online:
March 24, 2008
Citation
Peng, B, & Espinosa, HD. "Fracture Size Effect in Ultrananocrystalline Diamond: Weibull Theory Applicability." Proceedings of the ASME 2004 International Mechanical Engineering Congress and Exposition. Applied Mechanics. Anaheim, California, USA. November 13–19, 2004. pp. 341-345. ASME. https://doi.org/10.1115/IMECE2004-60070
Download citation file:
7
Views
Related Proceedings Papers
Related Articles
Tensile and Fracture Properties of an Fe-18Cr-20Ni-5Mn-0.16N Fully Austenitic Weld Metal at 4 K
J. Eng. Mater. Technol (October,1986)
Application of Fracture Mechanics to Failure in Manatee Rib Bone
J Biomech Eng (June,2006)
Focused Ion Beam Induced Surface Damage Effect on the Mechanical Properties of Silicon Nanowires
J. Eng. Mater. Technol (October,2013)
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Investigation of Some Problems In Developing Standards for Precracked Charpy Slow Bend Tests
Developments in Fracture Mechanics Test Methods Standardization
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium