The effectiveness of fitting a locomotive cab with a passive inflatable restraint system utilizing inflatable structures, and interior padding to protect the operator has been evaluated for the in-line collision scenario. It is a challenge to design a system that increases protection for the locomotive operator within the cab during accidents, while allowing that operator to react to a specific situation by choosing either to leave or remain in the seat or cab. Numerous strategies have been proposed to increase locomotive cab occupant protection; however, most of these proposals have either required an active response from the cab occupants, e.g., getting into a refuge, or inhibited the potential for fleeing the cab, e.g., seatbelts. In this study, the occupant protection of a typical locomotive cab interior with a vertical console-stand style control is compared with the occupant protection of an interior modified with the addition of two tube-shaped inflatable structures for secondary impact injury mitigation. The crashworthiness performances of these two interior arrangements are compared for in-line train-to-train collision scenarios that approximate a locomotive-led train collision with another locomotive or cab car-led train. The analysis uses, as a basis, accident data and information on the crashworthiness performance of the locomotive interior in a train-to-train collision between a standing locomotive-led consist and a moving cab car-led consist conducted on January 31, 2002 at the Transportation Technology Center in Pueblo, Colorado. An analysis model is developed and validated using the full-scale train-to-train test locomotive interior/occupant experiment. The interior/occupant model then serves as a means of interpolating to different crash pulses, and with the alternative protection method using inflatable tube-like structures and interior padding. A range of locomotive operator sizes is investigated, as well as a range of selected initial seating positions for the locomotive operator.
Skip Nav Destination
ASME 2003 International Mechanical Engineering Congress and Exposition
November 15–21, 2003
Washington, DC, USA
Conference Sponsors:
- Rail Transportation Division
ISBN:
0-7918-3727-0
PROCEEDINGS PAPER
Locomotive Cab Occupant Protection Available to Purchase
John D. Zolock,
John D. Zolock
U.S. Department of Transportation, Cambridge, MA
Search for other works by this author on:
David C. Tyrell
David C. Tyrell
U.S. Department of Transportation, Cambridge, MA
Search for other works by this author on:
John D. Zolock
U.S. Department of Transportation, Cambridge, MA
David C. Tyrell
U.S. Department of Transportation, Cambridge, MA
Paper No:
IMECE2003-55121, pp. 57-64; 8 pages
Published Online:
May 12, 2008
Citation
Zolock, JD, & Tyrell, DC. "Locomotive Cab Occupant Protection." Proceedings of the ASME 2003 International Mechanical Engineering Congress and Exposition. Rail Transportation. Washington, DC, USA. November 15–21, 2003. pp. 57-64. ASME. https://doi.org/10.1115/IMECE2003-55121
Download citation file:
15
Views
Related Proceedings Papers
Related Articles
A MADYMO Model of Near-Side Human Occupants in Side Impacts
J Biomech Eng (May,1994)
Rail Passenger Vehicle Crashworthiness Simulations Using Multibody Dynamics Approaches
J. Comput. Nonlinear Dynam (July,2017)
Recent Studies on the Dynamic Plastic Behavior of Structures - An Update
Appl. Mech. Rev (October,1996)
Related Chapters
Application of Probabilistic Methods for the Evaluation of Deterministic Deviations from Technical Specifications (PSAM-0277)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
Insights and Results of the Shutdown PSA for a German SWR 69 Type Reactor (PSAM-0028)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)