The combustion of nonane and JP8 droplets was studied in an environment to promote spherically symmetric droplet flames. Measurements of the droplet, flame and soot ‘shell’ or ‘cloud’ diameters were made to examine how the burning process and sooting dynamics were influenced by three miscible additives: hexanol, tripropylene glycol methyl ether (TPM), and an additive that had been previously developed to improve thermal stability of JP8, called as ‘+100’. The experimental results presented for nonane were used to compare with JP8 for a comparatively simple fuel. The initial droplet diameters ranged from 0.4mm to 0.7mm to allow quantitative measurement of the influence of droplet diameter on the droplet burning process. Spherical symmetry was promoted by carrying out the experiments in microgravity. The burning conditions were room temperature air at atmospheric pressure. Soot formation was found to be massive for JP8 compared to nonane, with thick dark soot clouds that accumulated significant soot as burning progressed. With hexanol and TPM mixed with JP8, soot formation was noticeably reduced. Soot trends in the approximate order of JP8 > JP8+100 > JP8+100 / TPM (90/10, v/v) > JP8+100 / TPM (80/20) > JP8+100 / hexanol (50/50) > nonane are noted for the fixed initial droplet diameter. Significant droplet heating was found for JP8 compared to nonane, due to the higher liquid thermal diffusivity of nonane compared to JP8 and the lower product of density and specific heat of nonane compared to JP8. A distinct influence of initial droplet diameter on the subsequent evolution of droplet diameter after ignition was found for nonane in that larger droplets burned slower than smaller droplets for the range of initial droplet diameters examined. The evolution of soot shell diameter was independent of additive concentrations for JP8 and still distinct from nonane. A new scale variable is presented which collapses the various ‘standoff’ diameters (soot shell and flame) onto a single curve for a given fuel.
Skip Nav Destination
ASME 2003 International Mechanical Engineering Congress and Exposition
November 15–21, 2003
Washington, DC, USA
Conference Sponsors:
- Heat Transfer Division
ISBN:
0-7918-3718-1
PROCEEDINGS PAPER
Combustion of Nonane and JP8 Droplets With Additives in Low Convection Available to Purchase
C. T. Avedisian
C. T. Avedisian
Cornell University, Ithaca, NY
Search for other works by this author on:
J. H. Bae
Cornell University, Ithaca, NY
C. T. Avedisian
Cornell University, Ithaca, NY
Paper No:
IMECE2003-42019, pp. 399-404; 6 pages
Published Online:
May 12, 2008
Citation
Bae, JH, & Avedisian, CT. "Combustion of Nonane and JP8 Droplets With Additives in Low Convection." Proceedings of the ASME 2003 International Mechanical Engineering Congress and Exposition. Heat Transfer, Volume 1. Washington, DC, USA. November 15–21, 2003. pp. 399-404. ASME. https://doi.org/10.1115/IMECE2003-42019
Download citation file:
8
Views
Related Proceedings Papers
Related Articles
Reduction of Nitric Oxides and Soot by Premixed Fuel in Partial HCCI Engine
J. Eng. Gas Turbines Power (July,2006)
Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model
J. Eng. Gas Turbines Power (April,2019)
Holographic Interferometry Temperature Measurements in Liquids for Pool Fires Supported on Water
J. Heat Transfer (November,1992)
Related Chapters
Nuclear Fuel Materials and Basic Properties
Fundamentals of Nuclear Fuel
Lay-Up and Start-Up Practices
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
The Special Characteristics of Closed-Cycle Gas Turbines
Closed-Cycle Gas Turbines: Operating Experience and Future Potential