Abstract

This paper presents a procedure for identifying the free-free vibration data of a structure from the available vibration data of the same structure with boundary conditions. For a structure in a mechanical system, depending upon the dynamic formulation used, we may need a set of free-free modal data or a set of constrained modal data. If a finite element model of the structure is available, its vibration data can be obtained analytically under any desired boundary conditions. However, if a finite element model is not available, the vibration data may be determined experimentally. Since experimentally measured vibration data are obtained for a structure supported by some form of boundary conditions, we may need to determine its free-free vibration data. The aim of this study is to extract, based on experimentally obtained vibration data, the necessary free-free frequencies and the associated modes for structures to be used in dynamic formulations. The available vibration data may be obtained for a structure supported either by springs or by fixed boundary conditions. Furthermore, the available modes may be either a complete set; i.e., as many modes as the number of degrees of freedom of the associated FE model is available, or it can be an incomplete set.

This content is only available via PDF.
You do not currently have access to this content.