Volumes | ASME International Mechanical Engineering Congress and Exposition | American Society of Mechanical Engineers Digital Collection

Topics: Cutting , Friction , Simulation , Sustainability , Symmetry (Physics) , Wear , Additive manufacturing , Computer simulation , Cutting tools , Finite element analysis

Parametric Analysis of ANFIS, ANFIS-PSO, and ANFIS-GA Models for the Prediction of Aluminum Surface Roughness in End-Milling Operation

Serge Balonji, Imhade Princess Okokpujie, Lagouge Tartibu

IMECE 2022; V02BT02A006https://doi.org/10.1115/IMECE2022-95418

Abstract

View Articletitled, Parametric Analysis of ANFIS, ANFIS-PSO, and ANFIS-GA Models for the Prediction of Aluminum Surface Roughness in End-Milling Operation

PDF

Topics: Aluminum , Computer numerical control machine tools , Milling , Particle swarm optimization , Surface roughness

Thermal Analysis and Design of Self-Heating Molds Using Large-Scale Additive Manufacturing for Out-of-Autoclave Applications

Deepak Kumar Pokkalla, Ahmed Arabi Hassen, Jesse Heineman, Thomas Snape, John Arimond, Vlastimil Kunc, Seokpum Kim

IMECE 2022; V02BT02A007https://doi.org/10.1115/IMECE2022-95790

Abstract

View Articletitled, Thermal Analysis and Design of Self-Heating Molds Using Large-Scale Additive Manufacturing for Out-of-Autoclave Applications

PDF

Topics: Additive manufacturing , Carbon fibers , Composite materials , Design , Heating , Manufacturing , Thermal analysis , Wire

2D Simulation of the Placement of a Pin-Through-Hole Component and Solder Paste Melting

Nelson Rodrigues, Inês Teixeira, Violeta Carvalho, Duarte Santos, Joao Velosa, Ana Ferreira, Delfim Soares, José Teixeira, Senhorinha Teixeira

IMECE 2022; V02BT02A008https://doi.org/10.1115/IMECE2022-95960

Abstract

View Articletitled, 2D Simulation of the Placement of a Pin-Through-Hole Component and Solder Paste Melting

PDF

Topics: Melting , Printing , Simulation , Solders

Latent Representation and Characterization of Scanning Strategy on Laser Powder Bed Fusion Additive Manufacturing

Farhad Imani, Ruimin Chen

IMECE 2022; V02BT02A009https://doi.org/10.1115/IMECE2022-96019

Abstract

View Articletitled, Latent Representation and Characterization of Scanning Strategy on Laser Powder Bed Fusion Additive Manufacturing

PDF

Topics: Additive manufacturing , Lasers

A Proof-of-Concept Study of a Magnetorheological Micropump

Sevki Cesmeci, Rubayet Hassan, Mark Thompson

IMECE 2022; V02BT02A010https://doi.org/10.1115/IMECE2022-96174

Abstract

View Articletitled, A Proof-of-Concept Study of a Magnetorheological Micropump

PDF

Topics: Additive manufacturing , Diabetes , Micropumps

Novel Digital Twin Concept for Industrial Application. Study Case: Propulsion Drive System

Sergei Jegorov, Anton Rassõlkin, Viktor Rjabtšikov, Mahmoud Ibrahim, Vladimir Kuts

IMECE 2022; V02BT02A011https://doi.org/10.1115/IMECE2022-97243

Abstract

View Articletitled, Novel Digital Twin Concept for Industrial Application. Study Case: Propulsion Drive System

PDF

Topics: Digital twin , Propulsion

Digital Manufacturing Process Simulation and Validation

Data Augmentation Using Spectral Failure Deltas to Diagnose Bearing Failure

Ethan Wescoat, Matthew Krugh, Laine Mears

IMECE 2022; V02BT02A012https://doi.org/10.1115/IMECE2022-93869

Abstract

View Articletitled, Data Augmentation Using Spectral Failure Deltas to Diagnose Bearing Failure

PDF

Topics: Bearings , Failure , Failure data , Damage , Fatigue , Algorithms , Condition monitoring , Digital twin , Maintenance , Manufacturing

Comparison of Residual Stresses in Cold Spray Coatings: Lagrangian vs. Eulerian Finite Element Methods

Jacob O’Donnell, Michael Smith, Paul Cavallaro

IMECE 2022; V02BT02A013https://doi.org/10.1115/IMECE2022-93902

Abstract

View Articletitled, Comparison of Residual Stresses in Cold Spray Coatings: Lagrangian vs. Eulerian Finite Element Methods

PDF

Topics: Coatings , Finite element methods , Residual stresses , Sprays

Recovering From Cyber-Manufacturing Attacks by Reinforcement Learning

Romesh Prasad, Matthew K. Swanson, Young Moon

IMECE 2022; V02BT02A014https://doi.org/10.1115/IMECE2022-93982

Abstract

View Articletitled, Recovering From Cyber-Manufacturing Attacks by Reinforcement Learning

PDF

Topics: Manufacturing , Reinforcement learning

Comprehensive Analysis of Cyber-Manufacturing Attacks Using a Cyber-Manufacturing Testbed

Romesh Prasad, Young Moon

IMECE 2022; V02BT02A015https://doi.org/10.1115/IMECE2022-94075

Abstract

View Articletitled, Comprehensive Analysis of Cyber-Manufacturing Attacks Using a Cyber-Manufacturing Testbed

PDF

Topics: Manufacturing

High Efficiency Manufacturing With a Smart Carbon Fiber End Effector

Carrington Chun, David A. Guerra-Zubiaga, Garrett Bailey, Kathryn Bharadwaj

IMECE 2022; V02BT02A016https://doi.org/10.1115/IMECE2022-94207

Abstract

View Articletitled, High Efficiency Manufacturing With a Smart Carbon Fiber End Effector

PDF

Topics: Carbon fibers , End effectors , Manufacturing , Robotics

SMA-Based Haptic Gloves Usage in the Smart Factory Concept: XR Use Case

Rupal Srivastava, Vladimir Kuts, Eber Lawrence Souza Gouveia, Niall Murray, Declan Devine, Eoin O’Connell

IMECE 2022; V02BT02A017https://doi.org/10.1115/IMECE2022-94305

Abstract

View Articletitled, SMA-Based Haptic Gloves Usage in the Smart Factory Concept: XR Use Case

PDF

Topics: Haptics , Human-robot interaction , Robots , Shape memory alloys

Taxonomy of Severity of Cyber-Attacks in Cyber-Manufacturing Systems

Carlos Espinoza-Zelaya, Young Moon

IMECE 2022; V02BT02A018https://doi.org/10.1115/IMECE2022-94492

Abstract

View Articletitled, Taxonomy of Severity of Cyber-Attacks in Cyber-Manufacturing Systems

PDF

Topics: Cyber-attacks , Manufacturing

Assessing Severity of Cyber-Attack Threats Against Cyber-Manufacturing Systems

Carlos Espinoza-Zelaya, Young Moon

IMECE 2022; V02BT02A019https://doi.org/10.1115/IMECE2022-94493

Abstract

View Articletitled, Assessing Severity of Cyber-Attack Threats Against Cyber-Manufacturing Systems

PDF

Topics: Cyber-attacks , Manufacturing

Conveyer-Less Matrix Assembly Layout Design to Maximize Labor Productivity and Footprint Usage

Ankur Verma, Seog-Chan Oh, James W. Wells, Jorge Arinez, Soundar Kumara

IMECE 2022; V02BT02A020https://doi.org/10.1115/IMECE2022-94628

Abstract

View Articletitled, Conveyer-Less Matrix Assembly Layout Design to Maximize Labor Productivity and Footprint Usage

PDF

Topics: Design , Electric vehicles , Manufacturing , Mobile robots

Forestry Crane Immersive User Interface for Control and Teleoperation

Simone Luca Pizzagalli, Yevhen Bondarenko, Baris Cem Baykara, Alar Niidas, Vladimir Kuts, Margus Kerm, Tauno Otto

IMECE 2022; V02BT02A021https://doi.org/10.1115/IMECE2022-94975

Abstract

View Articletitled, Forestry Crane Immersive User Interface for Control and Teleoperation

PDF

Topics: Cranes , User interfaces

Physical and Virtual Robotic Cells in Industry 4.0 Towards Industry 5.0: An XR-Based Conceptual Framework

Vladimir Kuts, Maulshree Singh, Saeed Hamood Alsamhi, Declan Devine, Niall Murray

IMECE 2022; V02BT02A022https://doi.org/10.1115/IMECE2022-95021

Abstract

View Articletitled, Physical and Virtual Robotic Cells in Industry 4.0 Towards Industry 5.0: An XR-Based Conceptual Framework

PDF

Topics: Augmented reality , Design , Design methodology , Digital twin , Flow (Dynamics) , Internet of things , Machinery , Manufacturing , Robotics , Robots

A Methodology for Digital Twins of Product Lifecycle Supported by Digital Thread

Laetitia V. Monnier, Guodong Shao, Sebti Foufou

IMECE 2022; V02BT02A023https://doi.org/10.1115/IMECE2022-95182

Abstract

View Articletitled, A Methodology for Digital Twins of Product Lifecycle Supported by Digital Thread

PDF

Topics: Digital twin , Manufacturing , Thread

Energy Consumption Evaluation on Robotic Drilling Process Using Digital Twin Technology

Matheus Cardoso, Rodrigo Lozan, Gustavo Barbosa, David Guerra-Zubiaga, Sidney Shiki

IMECE 2022; V02BT02A024https://doi.org/10.1115/IMECE2022-95205

Abstract

View Articletitled, Energy Consumption Evaluation on Robotic Drilling Process Using Digital Twin Technology

PDF

Topics: Digital twin , Drilling , Energy consumption , Experimental design , Machining , Robotics

Digital Twin Simulations Based Reinforcement Learning for Navigation and Control of a Wheel-on-Leg Mobile Robot

Saleh Alsaleh, Aleksei Tepljakov, Mart Tamre, Vladimir Kuts, Eduard Petlenkov

IMECE 2022; V02BT02A025https://doi.org/10.1115/IMECE2022-95411

Abstract

View Articletitled, Digital Twin Simulations Based Reinforcement Learning for Navigation and Control of a Wheel-on-Leg Mobile Robot

PDF

Topics: Digital twin , Mobile robots , Navigation , Reinforcement learning , Simulation , Wheels

Exploration in Using the Weibull Distribution for Characterizing Trends in Bearing Failure Operational Changes

Ethan Wescoat, Joshua D. Bradford, Matthew Krugh, Laine Mears

IMECE 2022; V02BT02A026https://doi.org/10.1115/IMECE2022-95441

Abstract

View Articletitled, Exploration in Using the Weibull Distribution for Characterizing Trends in Bearing Failure Operational Changes

PDF

Topics: Bearings , Contamination , Failure , Fatigue , Maintenance , Service life (Equipment) , Weibull distribution , NASA , Damage , Failure mechanisms

The Use of Low-Code During a Skill Shortage

Aaron Büscher, Daniel Schilberg, Lars Wiegert

IMECE 2022; V02BT02A027https://doi.org/10.1115/IMECE2022-95505

Abstract

View Articletitled, The Use of Low-Code During a Skill Shortage

PDF

Topics: Computer programming languages , Computer software

Industry 4.0 Trends in Intelligent Manufacturing Automation Exploring Machine Learning

William Hoover, David A. Guerra-Zubiaga, Jeremy Banta, Kevin Wandene, Kaleb Key, Germanico Gonzalez-Badillo

IMECE 2022; V02BT02A028https://doi.org/10.1115/IMECE2022-96092

Abstract

View Articletitled, Industry 4.0 Trends in Intelligent Manufacturing Automation Exploring Machine Learning

PDF

Topics: Digital twin , Machine learning , Manufacturing , Manufacturing automation

Innovative Product and Process Design

Domain Segmentation Optimization of Multiple Anisotropic Materials With Varying Orientation Angles Using a Topology Optimization Based on the Extended Level Set Method

Masaki Noda, Kei Matsushima, Yuki Noguchi, Takayuki Yamada

IMECE 2022; V02BT02A029https://doi.org/10.1115/IMECE2022-94041

Abstract

View Articletitled, Domain Segmentation Optimization of Multiple Anisotropic Materials With Varying Orientation Angles Using a Topology Optimization Based on the Extended Level Set Method

PDF

Topics: Anisotropy , Image segmentation , Optimization , Topology optimization

Topology Optimization for Acoustic Structures Without Floating Components

Yuki Noguchi, Yusei Ohta, Kei Matsushima, Takayuki Yamada

IMECE 2022; V02BT02A030https://doi.org/10.1115/IMECE2022-94365

Abstract

View Articletitled, Topology Optimization for Acoustic Structures Without Floating Components

PDF

Topics: Acoustics , Topology optimization

A Numerical Investigation to Compare Point Cloud and STL-Based Toolpath Strategies for 5-Axis Incremental Sheet Forming

Ayushi Gupta, Aniket Nagargoje, Abhay Kumar Dubey, Puneet Tandon

IMECE 2022; V02BT02A031https://doi.org/10.1115/IMECE2022-94589

Abstract

View Articletitled, A Numerical Investigation to Compare Point Cloud and STL-Based Toolpath Strategies for 5-Axis Incremental Sheet Forming

PDF

Topics: Toolpaths

Analysis of Shark Fluid Dynamics to Guide Satellite Telemetry Tag Development

Munir Zarea, Evan Brown, Allen George, Joshua Kozsey, Tyler Palmgren, Meng-Chien Wu, Sarah Oman, John Parmigiani, Joseph Piacenza, Susan Piacenza

IMECE 2022; V02BT02A032https://doi.org/10.1115/IMECE2022-94838

Abstract

View Articletitled, Analysis of Shark Fluid Dynamics to Guide Satellite Telemetry Tag Development

PDF

Topics: Fluid dynamics , Satellites , Telemetry , Drag (Fluid dynamics) , Computational fluid dynamics , Design , Wind tunnels , Additive manufacturing , Computer simulation , Computer software

A New Tribo-Characteristic Improvement Technique by Ultra-Short Pulsed Laser Irradiation in PAO Oil

Xiaoxu Liu, Yoshiki Tanaka, Satoru Maegawa, Shingo Ono, Fumihiro Itoigawa

IMECE 2022; V02BT02A033https://doi.org/10.1115/IMECE2022-95237

Abstract

View Articletitled, A New Tribo-Characteristic Improvement Technique by Ultra-Short Pulsed Laser Irradiation in PAO Oil

PDF

Topics: Friction , Irradiation (Radiation exposure) , Lasers , Wear resistance

Thin Steel Plate Surface Rust Recognition Using Processing Light Measurement for Reduction of Laser Cutting Defect False Recognition

Mizuki Ishiguro, Shin'ichi Warisawa, Naoyasu Narita, Hironobu Miyoshi, Rui Fukui

IMECE 2022; V02BT02A034https://doi.org/10.1115/IMECE2022-96166

Abstract

View Articletitled, Thin Steel Plate Surface Rust Recognition Using Processing Light Measurement for Reduction of Laser Cutting Defect False Recognition

PDF

Topics: Laser cutting , Lasers , Steel , Steel corrosion , Cutting , Analytical methods , Corrosion , Irradiation (Radiation exposure) , Machine learning , Plates (structures)

Laser-Based Advanced Manufacturing and Materials Processing

Modelling of Surface Roughness in CO₂ Laser Ablation of Aluminium-Coated Polymethyl Methacrylate (PMMA) Using Adaptive Neuro-Fuzzy Inference System (ANFIS)

Job Lazarus Okello, Ahmed M. R. Fath El-Bab, Masahiko Yoshino, Hassan A. El-Hofy, Mohsen A. Hassan

IMECE 2022; V02BT02A035https://doi.org/10.1115/IMECE2022-92024

Abstract

View Articletitled, Modelling of Surface Roughness in CO<sub>2</sub> Laser Ablation of Aluminium-Coated Polymethyl Methacrylate (PMMA) Using Adaptive Neuro-Fuzzy Inference System (ANFIS)

PDF

Topics: Ablation (Vaporization technology) , Aluminum , Carbon dioxide lasers , Manufacturing , Microchannels , Modeling , Surface roughness

A Multi-Scale Model for Microstructure Evolution During a Multi-Material Additive Manufacturing Process

Abba A. Abubakar, Khaled S. Al-Athel, Syed S. Akhtar, Abdulazeez Abubakar

IMECE 2022; V02BT02A036https://doi.org/10.1115/IMECE2022-92563

Abstract

View Articletitled, A Multi-Scale Model for Microstructure Evolution During a Multi-Material Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Composite materials

An Adaptive Thermal Finite Element Simulation of Direct Energy Deposition With Reinforcement Learning: A Conceptual Framework

João Sousa, Roya Darabi, Ana Reis, Marco Parente, Luís Paulo Reis, Jose Cesar de Sa

IMECE 2022; V02BT02A037https://doi.org/10.1115/IMECE2022-95055

Abstract

View Articletitled, An Adaptive Thermal Finite Element Simulation of Direct Energy Deposition With Reinforcement Learning: A Conceptual Framework

PDF

Topics: Additive manufacturing , Finite element analysis , Process control , Reinforcement learning , Simulation

Nanosecond Laser Modification of Nickel-Titanium Based Shape Memory Alloys

Jianfeng Ma, Mahmud Anjir Karim, Muhammud P. Jahan, Sally Jee Hyun Shim, Shuting Lei

IMECE 2022; V02BT02A038https://doi.org/10.1115/IMECE2022-95292

Abstract

View Articletitled, Nanosecond Laser Modification of Nickel-Titanium Based Shape Memory Alloys

PDF

Topics: Lasers , Nickel , Shape memory alloys , Titanium , X-ray spectroscopy

Effect of Heat Treatment on the Oxidation and High Temperature Wear Performance of Alloy Ti-6Al-4V Manufactured by Direct Metal Laser Sintering

Ragavanantham Shanmugam, Dhinakaran Veeman, Muthu Shanmugam Mannan, Gopika Kalaiselvan

IMECE 2022; V02BT02A039https://doi.org/10.1115/IMECE2022-95392

Abstract

View Articletitled, Effect of Heat Treatment on the Oxidation and High Temperature Wear Performance of Alloy Ti-6Al-4V Manufactured by Direct Metal Laser Sintering

PDF

Topics: Alloys , Heat treating (Metalworking) , High temperature , Lasers , Metals , Oxidation , Sintering , Wear

Microstructure and Mechanical Properties of Inconel 718 / Yttria-Stabilized Zirconia (YSZ) Metal Matrix Composite Coating Produced by Laser Directed Energy Deposition Technique

Gourhari Ghosh, Prakhar Jain, Anil Saigal, Ramesh Singh

IMECE 2022; V02BT02A040https://doi.org/10.1115/IMECE2022-96945

Abstract

View Articletitled, Microstructure and Mechanical Properties of Inconel 718 / Yttria-Stabilized Zirconia (YSZ) Metal Matrix Composite Coating Produced by Laser Directed Energy Deposition Technique

PDF

Topics: Coatings , Lasers , Mechanical properties , Metal matrix composites

Manufacturing: General

Additive Manufacturing of Embedded Strain Sensors in Structural Composites

Dongfang Zhao, Jacob Meves, Anirban Mondal, Mrinal C. Saha, Yingtao Liu

IMECE 2022; V02BT02A041https://doi.org/10.1115/IMECE2022-94366

Abstract

View Articletitled, Additive Manufacturing of Embedded Strain Sensors in Structural Composites

PDF

Topics: Additive manufacturing , Composite materials , Nanocomposites , Sensors , Strain sensors

Numerical and Experimental Investigation of Rheodrop Technology

Khalid Alqosaibi, Mohammed Alemmrani, Ahmed Almalki, Alaauldeen Duhduh, John Coulter

IMECE 2022; V02BT02A042https://doi.org/10.1115/IMECE2022-94952

Abstract

View Articletitled, Numerical and Experimental Investigation of Rheodrop Technology

PDF

Topics: Computer software , Cycles , Damage , Injection molding , Inventions , Molding , Polymer melts , Polymers , Rheology , Shear rate

Performance Evaluation of Conveyor-Less Matrix Assembly System Using Simulation and Mathematical Models

Min-Soo Kim, Seog-Chan Oh, Eun Hyo Chang, James W. Wells, Jorge Arinez, Young Jae Jang

IMECE 2022; V02BT02A043https://doi.org/10.1115/IMECE2022-94996

Abstract

View Articletitled, Performance Evaluation of Conveyor-Less Matrix Assembly System Using Simulation and Mathematical Models

PDF

Topics: Conveyor systems , Manufacturing , Performance evaluation , Simulation

Derivation of the Exact Curvature Formulation for Gothic Arch Ball Screw Grooves

Antonio C. Bertolino, Andrea De Martin, Stefano Mauro, Massimo Sorli

IMECE 2022; V02BT02A044https://doi.org/10.1115/IMECE2022-95746

Abstract

View Articletitled, Derivation of the Exact Curvature Formulation for Gothic Arch Ball Screw Grooves

PDF

Topics: Gothic arches , Screws

Damaged Apple Detection Using Artificial Intelligence

Sathish K. Gurupatham, Caleb Bailey

IMECE 2022; V02BT02A045https://doi.org/10.1115/IMECE2022-96162

Abstract

View Articletitled, Damaged Apple Detection Using Artificial Intelligence

PDF

Topics: Artificial intelligence , Machine learning , Artificial neural networks , Algorithms , Mechanical engineering , Quality control , Assembly lines , Brain , Errors , Machine components

A Review of the Design and Implementation of Digital Twins for Smart Manufacturing

Shafahat Ali, Said Abdallah, Salman Pervaiz

IMECE 2022; V02BT02A046https://doi.org/10.1115/IMECE2022-97113

Abstract

View Articletitled, A Review of the Design and Implementation of Digital Twins for Smart Manufacturing

PDF

Topics: Design , Digital twin , Manufacturing

Measurement Science, Sensors, Non-Destructive Evaluation (NDE), and Process Control for Advanced Manufacturing

Identification of Flaws and Assessment of Mechanical Properties in Additively Manufactured Titanium Parts Using Acoustic Resonance Ultrasound Spectroscopy (RUS)

Hossein Taheri, Caleb Williams, Russell Krenek, Gregory Weaver, Mohammad Taheri

IMECE 2022; V02BT02A047https://doi.org/10.1115/IMECE2022-94871

Abstract

View Articletitled, Identification of Flaws and Assessment of Mechanical Properties in Additively Manufactured Titanium Parts Using Acoustic Resonance Ultrasound Spectroscopy (RUS)

PDF

Topics: Acoustics , Additive manufacturing , Mechanical properties , Nondestructive evaluation , Resonance , Spectroscopy , Titanium , Ultrasound

Non-Destructive Evaluation of Embedded Cracks in Metal by Ultrasound: Experimental Investigation

Sk. Yasin Habib Abir, S. H. M. Muntasir Rahi, Mohaimenul Hasan, Titan Chandra Paul

IMECE 2022; V02BT02A048https://doi.org/10.1115/IMECE2022-94929

Abstract

View Articletitled, Non-Destructive Evaluation of Embedded Cracks in Metal by Ultrasound: Experimental Investigation

PDF

Topics: Fracture (Materials) , Metals , Nondestructive evaluation , Shear waves , Ultrasound

Predicting the Hounsfield Unit (HU) of Aluminum Alloy AA2011 From the Weight Fractions of its Alloying Elements: An X-Ray Computed Tomography Study

Ahmad M. R. Baydoun, Ramsey F. Hamade

IMECE 2022; V02BT02A049https://doi.org/10.1115/IMECE2022-95313

Abstract

View Articletitled, Predicting the Hounsfield Unit (HU) of Aluminum Alloy AA2011 From the Weight Fractions of its Alloying Elements: An X-Ray Computed Tomography Study

PDF

Topics: Aluminum alloys , Computerized tomography , Weight (Mass) , X-rays , Alloys , Metals , Computers , Nondestructive evaluation

Distributed Acoustic Sensing (DAS) for Intelligent In-Motion Transportation Condition Monitoring

Hossein Taheri, Michael Jones, Suyen Bueso Quan, Maria Gonzalez Bocanegra, Mohammad Taheri

IMECE 2022; V02BT02A050https://doi.org/10.1115/IMECE2022-95366

Abstract

View Articletitled, Distributed Acoustic Sensing (DAS) for Intelligent In-Motion Transportation Condition Monitoring

PDF

Topics: Acoustics , Condition monitoring , Data acquisition systems , Nondestructive evaluation , Transportation systems

Heterogeneous Sensing and Bayesian Optimization for Smart Calibration in Additive Manufacturing Process

Sean Rescsanski, Mahdi Imani, Farhad Imani

IMECE 2022; V02BT02A051https://doi.org/10.1115/IMECE2022-96010

Abstract

View Articletitled, Heterogeneous Sensing and Bayesian Optimization for Smart Calibration in Additive Manufacturing Process

PDF

Topics: Additive manufacturing , Calibration , Optimization

Development of the Ultrasonic System Integration With 3D Polymer Printing

Jonathan England, Ethan Darnell, Janak Bhakta, Maria D’Orazio, Mariya Chukovenkova, Andrei Zagrai

IMECE 2022; V02BT02A052https://doi.org/10.1115/IMECE2022-96028

Abstract

View Articletitled, Development of the Ultrasonic System Integration With 3D Polymer Printing

PDF

Topics: Polymers , Printing , Ultrasonic transducers , Temperature , Additive manufacturing , Finite element analysis , Materials properties , Nondestructive evaluation , Steel , Young's modulus

Build Chamber and Start Plate Variability During Electron Beam Melting Machine Setup

Garrett Kelley, Ramulu Mamidala

IMECE 2022; V02BT02A053https://doi.org/10.1115/IMECE2022-96980

Abstract

View Articletitled, Build Chamber and Start Plate Variability During Electron Beam Melting Machine Setup

PDF

Topics: Additive manufacturing , Cathode ray oscilloscopes , Electron beams , Machinery , Melting

Nanomanufacturing: Novel Processes, Applications, and Process-Property Relationships

Experimental Investigation of the Robustness of Bulk Metallic Glass-Based Tooling for Microinjection Molding

Ahmed Almalki, Ali Rajhi, Hussam Noor, Animesh Kundu, John Coulter

IMECE 2022; V02BT02A054https://doi.org/10.1115/IMECE2022-94888

Abstract

View Articletitled, Experimental Investigation of the Robustness of Bulk Metallic Glass-Based Tooling for Microinjection Molding

PDF

Topics: Coating processes , Coatings , Glass , Molding , Robustness , Tooling , Zirconium

Robotics and Automation in Advanced Manufacturing

Prototype Design and Manufacture of a Deployable Tensegrity Microrobot

Christian Kazoleas, Kaushik Mehta, Sichen Yuan

IMECE 2022; V02BT02A055https://doi.org/10.1115/IMECE2022-93929

Abstract

View Articletitled, Prototype Design and Manufacture of a Deployable Tensegrity Microrobot

PDF

Topics: Additive manufacturing , Design , Engineering prototypes , Tensegrity , Robots , Biological tissues , Braking , Cables , Control panels , Damage

Assembly Automation Using an Industrial Robot

Timofey Dragun, Seth Mascaro, Jonathan Blanchard, Vedang Chauhan

IMECE 2022; V02BT02A056https://doi.org/10.1115/IMECE2022-94986

Abstract

View Articletitled, Assembly Automation Using an Industrial Robot

PDF

Topics: Manufacturing , Robotics , Robots , Simulation , Computer software , Additive manufacturing , Mechatronics , Printed circuit boards

In-Process Intelligent Inspection of the Specimen Using Machine Vision

Adarsh Mahor, Ram Singar Yadav

IMECE 2022; V02BT02A057https://doi.org/10.1115/IMECE2022-95347

Abstract

View Articletitled, In-Process Intelligent Inspection of the Specimen Using Machine Vision

PDF

Topics: Inspection , Machinery , Algorithms , Dimensions , Manufacturing , Assembly lines , Computers , Shapes , Artificial neural networks , Conveyor belts

An Integrated Task and Path Planning Approach for Mobile Robots in Smart Factory

Shuo Liu, Bohan Feng, Dan Yu, Youyi Bi

IMECE 2022; V02BT02A058https://doi.org/10.1115/IMECE2022-95364

Abstract

View Articletitled, An Integrated Task and Path Planning Approach for Mobile Robots in Smart Factory

PDF

Topics: Energy consumption , Mobile robots , Path planning

Design of Human-Robot Collaborative Workstation for the Packaging of Kitchen Furniture

Marianna Ciccarelli, Simir Moschini, Matteo Claudio Palpacelli, Alessandra Papetti, Michele Germani

IMECE 2022; V02BT02A059https://doi.org/10.1115/IMECE2022-95452

Abstract

View Articletitled, Design of Human-Robot Collaborative Workstation for the Packaging of Kitchen Furniture

PDF

Topics: Design , Packaging , Risk assessment , Robots , Safety

Automated Design of FDM-Printable Snake-Like Compliant Mechanisms With Predefined End-Effector Poses

Simon Schiele, Christoph Rehekampff, Andreas Schroeffer, Laurin Schweigert, Tim C. Lueth

IMECE 2022; V02BT02A060https://doi.org/10.1115/IMECE2022-96568

Abstract

View Articletitled, Automated Design of FDM-Printable Snake-Like Compliant Mechanisms With Predefined End-Effector Poses

PDF

Topics: Additive manufacturing , Compliant mechanisms , Design , Design automation , End effectors , Modeling , Robots

Industrializing Residential Construction Using Artificial Intelligent (AI) Robotics

Hussein Abaza, Austin Clark, Aaron Schwartz, Henry J. Durce, II, David A. Guerra-Zubiaga

IMECE 2022; V02BT02A061https://doi.org/10.1115/IMECE2022-96675

Abstract

View Articletitled, Industrializing Residential Construction Using Artificial Intelligent (AI) Robotics

PDF

Topics: Manufacturing , Residential construction , Robotics , Robots

Sustainable Manufacturing Systems

Investigating the Tribological Aspects of Tool Wear Mechanism and Tool Life in Sustainable Lubri-Cooling Face Milling Process of Particle Reinforced SiCp/Al Metal Matrix Composites

Rashid Ali Laghari, Samir Mekid, Syed Sohail Akhtar, Asif Ali Laghari, Muhammad Jamil

IMECE 2022; V02BT02A062https://doi.org/10.1115/IMECE2022-95183

Abstract

View Articletitled, Investigating the Tribological Aspects of Tool Wear Mechanism and Tool Life in Sustainable Lubri-Cooling Face Milling Process of Particle Reinforced SiCp/Al Metal Matrix Composites

PDF

Topics: Cooling , Metal matrix composites , Milling , Particulate matter , Sustainability , Tribology , Wear

Environmental Sustainability of Additive Manufacturing: A Case Study of Indian Manufacturing Industry

Alok Yadav, Anish Kumar Sachdeva, Rajeev Agrawal, Rajiv Kumar Garg

IMECE 2022; V02BT02A063https://doi.org/10.1115/IMECE2022-95349

Abstract

View Articletitled, Environmental Sustainability of Additive Manufacturing: A Case Study of Indian Manufacturing Industry

PDF

Topics: Additive manufacturing , Manufacturing industry , Sustainability

Compostable, Full Biobased Foams Using Environmentally Benign Manufacturing

Kayode Oluwabunmi, Nandika Anne D’Souza, Weihuan Zhao

IMECE 2022; V02BT02A064https://doi.org/10.1115/IMECE2022-95956

Abstract

View Articletitled, Compostable, Full Biobased Foams Using Environmentally Benign Manufacturing

PDF

Topics: Foams (Chemistry) , Manufacturing , Thermal conductivity , Carbon dioxide , Temperature , Solidification , Acoustical properties , Biopolymers , Carbon , Carbon capture and storage

Cradle-to-Gate Life Cycle Analysis of Origami-Based Sheet Metal for Automobile Parts

Anwar Al-Gamal, Muhammad Ali Ablat, Lakshmi Ramineni, Majed Ali, Abdalmageed Almotari, Ala’aldin Alafaghani, Jian-Qiao Sun, Ala Qattawi

IMECE 2022; V02BT02A065https://doi.org/10.1115/IMECE2022-96922

Abstract

View Articletitled, Cradle-to-Gate Life Cycle Analysis of Origami-Based Sheet Metal for Automobile Parts

PDF

Topics: Automobiles , Emissions , Energy consumption , Gates (Closures) , Life cycle assessment , Metal stamping , Sheet metal

Tribological Issues in Materials, Manufacturing, and Medicine: A Symposium in Honor of Professor Said Jahanmir

Sliding Wear Behavior of Electron Beam Melted (EBM) Ti6Al4V

Mohammad Sayem Bin Abdullah, Ramulu Mamidala

IMECE 2022; V02BT02A066https://doi.org/10.1115/IMECE2022-94735

Abstract

View Articletitled, Sliding Wear Behavior of Electron Beam Melted (EBM) Ti6Al4V

PDF

Topics: Cathode ray oscilloscopes , Electron beams , Titanium , Wear

Variation Simulation and Design for Assembly

A Model-Based Approach for Integrated Variation Management

Dennis Horber, Stefan Götz, Benjamin Schleich, Sandro Wartzack

IMECE 2022; V02BT02A067https://doi.org/10.1115/IMECE2022-90956

Abstract

View Articletitled, A Model-Based Approach for Integrated Variation Management

PDF

Topics: Manufacturing , Modeling , Product design , Systems engineering

A Hierarchical Approach for the Verification and Validation of Tolerance Analysis Models

Paul Schaechtl, Benjamin Schleich, Sandro Wartzack

IMECE 2022; V02BT02A068https://doi.org/10.1115/IMECE2022-91890

Abstract

View Articletitled, A Hierarchical Approach for the Verification and Validation of Tolerance Analysis Models

PDF

Topics: Tolerance analysis

Contact Search Using a Kd-Tree for Non-Rigid Variation Simulation

Roham Sadeghi Tabar, Björn Lindau, Lars Lindkvist, Kristina Wärmefjord, Rikard Söderberg

IMECE 2022; V02BT02A069https://doi.org/10.1115/IMECE2022-94989

Abstract

View Articletitled, Contact Search Using a Kd-Tree for Non-Rigid Variation Simulation

PDF

Topics: Manufacturing , Simulation

Monitoring and Diagnosis of Dimensional Deviation in Assembly Process Using Tensor Regression

Rui Sun, Sun Jin, Yinhua Liu

IMECE 2022; V02BT02A070https://doi.org/10.1115/IMECE2022-95014

Abstract

View Articletitled, Monitoring and Diagnosis of Dimensional Deviation in Assembly Process Using Tensor Regression

PDF

Topics: Manufacturing , Tensors

Variation Analysis of Carbon Fibre Reinforced Polymers Light Weight Aero Engine Parts

Vilma Fernström, Johan Lööf, Andrew Frampton, Lena Brunnacker, Kristina Wärmefjord, Rikard Söderberg

IMECE 2022; V02BT02A071https://doi.org/10.1115/IMECE2022-95539

Abstract

View Articletitled, Variation Analysis of Carbon Fibre Reinforced Polymers Light Weight Aero Engine Parts

PDF

Topics: Aircraft engines , Carbon reinforced plastics , Composite materials , Digital twin , Simulation , Weight (Mass) , Assembly lines , Chain , Compression , Geometry