Topics: Vibration , Wafer steppers , Failure , Machinery , Acoustic emissions , Additive manufacturing , Collisions (Physics) , Design , Errors , Manufacturing

Architected Composites and Structures: Design for Multifunctionality

Influence of Coating on High Performance Heat Resistant Textile Curtains

Maria Cândida Vilarinho, Paulo Araújo, José Carlos Teixeira, Elisabete Silva, Dionisio Silveira, Delfim Soares, Maria C. Paiva, Daniel Ribeiro, Marisa Branco

IMECE 2021; V003T03A002doi:https://doi.org/10.1115/IMECE2021-73307

Abstract

View Article

PDF

Topics: Coatings , Heat , Textiles

Bioinspired Materials, Structures, and Applications

Fabrication of Bioinspired Micro/Nano Textured Rough Surfaces Through the Scalable Roll Coating Process

Sekkappan Chockalingam, Jong Eun Ryu, Md Didarul Islam, Myers Harbinson

IMECE 2021; V003T03A003doi:https://doi.org/10.1115/IMECE2021-71880

Abstract

View Article

PDF

Topics: Biomimetics , Coating processes , Coatings , Manufacturing , Surface roughness

Design of Engineered Materials and Components for Additive Manufacturing

Thermoplastics 3D Printing Using Fused Deposition Modeling on Fabrics

Maxwell Blais, Scott Tomlinson, Bashir Khoda

IMECE 2021; V003T03A004doi:https://doi.org/10.1115/IMECE2021-69695

Abstract

View Article

PDF

Topics: Additive manufacturing , Adhesion , Image segmentation , Modeling , Textiles

Mechanical Properties of Snap-Fits Fabricated by Selective Laser Sintering From Polyamide

Samuel Detzel, Annette C. Sigling, Tim C. Lueth

IMECE 2021; V003T03A005doi:https://doi.org/10.1115/IMECE2021-70328

Abstract

View Article

PDF

Topics: Additive manufacturing , Lasers , Mechanical properties , Sintering , Snap fitting , Bulk solids , Cantilevers , Flexible structures , Friction , Geometry

Strength and Qualities of Mixed Additive Manufacturing Materials

Seth Addeo, Margaret Nowicki, Kenneth McDonald, Nicole Zander

IMECE 2021; V003T03A006doi:https://doi.org/10.1115/IMECE2021-70564

Abstract

View Article

PDF

Topics: Additive manufacturing

Strength and Quality of Recycled Acrylonitrile Butadiene Styrene (ABS)

Micah Bibb, Margaret Nowicki, Kenneth McDonald, Nicole Zander

IMECE 2021; V003T03A007doi:https://doi.org/10.1115/IMECE2021-70583

Abstract

View Article

PDF

Topics: Additive manufacturing , Bone , Chemical properties , Differential scanning calorimetry , Errors , Machinery , Manufacturing , Materials testing , Mechanical testing , Recycling

Study of Flexural Strength and Fracture of Additive Manufactured Parts With Stiffeners

Srinivasa Prakash Regalla, P. V. Shyam, Sampath Mylavarapu, Sai Harshini Irigineni, Prakash Narayan Shrivastava

IMECE 2021; V003T03A008doi:https://doi.org/10.1115/IMECE2021-71519

Abstract

View Article

PDF

Topics: Additive manufacturing , Bending strength , Coatings , Fracture (Materials)

Imaging-Based Fatigue Mechanism Investigation of Additively Manufactured Ti-6Al-4V

Jie Chen, Changyu Meng, Yongming Liu

IMECE 2021; V003T03A009doi:https://doi.org/10.1115/IMECE2021-72865

Abstract

View Article

PDF

Topics: Additive manufacturing , Fatigue , Imaging

On Additive Manufacturing of Rib Fracture Fixation Implants: The Role of Lattice Design

Lauren Judkins, Richa Gupta, Christine Gabriele, Charles Tomonto, Michael W. Hast, Guha Manogharan

IMECE 2021; V003T03A010doi:https://doi.org/10.1115/IMECE2021-73086

Abstract

View Article

PDF

Topics: Additive manufacturing , Design , Fracture (Materials) , Fracture (Process) , Lasers

Design of Metamaterials, Metasurfaces, and Metadevices

Novel Nanocomposite Refractive Index Tuning Mechanism Based on Controlling Embedded Particle Morphology

Sipan Liu, Md Didarul Islam, Zahyun Ku, Augustine M. Urbas, John Derov, Darryl A. Boyd, Woohong Kim, Jasbinder S. Sanghera, Jong E. Ryu

IMECE 2021; V003T03A011doi:https://doi.org/10.1115/IMECE2021-70064

Abstract

View Article

PDF

Topics: Finite element analysis , Nanocomposites , Particulate matter , Refractive index

Highly Efficient Mid-Wavelength Infrared (MWIR) Polarizer by ORMOCHALC Composite With Improved Thermomechanical Stability and Spectral Selectivity

Md Didarul Islam, Sipan Liu, John Derov, Augustine M. Urbas, Zahyun Ku, Amy Sihn, Evan M. Smith, Darryl A. Boyd, Woohong Kim, Jasbinder S. Sanghera, Vinh Q. Nguyen, Jason D. Myers, Colin C. Baker, Jong Eun Ryu

IMECE 2021; V003T03A012doi:https://doi.org/10.1115/IMECE2021-70843

Abstract

View Article

PDF

Topics: Composite materials , Polarimetry , Polarizers (Light) , Refractive index , Stability , Sulfur , Thermomechanics , Wavelength , Wire

Fracture and Damage: Nano- to Macro-Scale

Probabilistic Study of Corrosion Pit-Induced Fatigue

Benjamin Starr, Serge L. Shishkin, Chittaranjan Sahay, Suhash Ghosh

IMECE 2021; V003T03A013doi:https://doi.org/10.1115/IMECE2021-69336

Abstract

View Article

PDF

Topics: Corrosion , Fatigue , Fracture (Materials) , Damage , Fatigue strength , Aircraft , Aluminum , Corners (Structural elements) , Density , Failure

Ductile-to-Brittle Fracture Size Effect of Titanium Sheets in Micro/Meso-Scale Plastic Deformation

Lei Sun, Zhutian Xu, Linfa Peng, Xinmin Lai

IMECE 2021; V003T03A014doi:https://doi.org/10.1115/IMECE2021-70083

Abstract

View Article

PDF

Topics: Brittleness , Deformation , Dislocations , Fracture (Materials) , Grain size , Size effect , Titanium

A Study of Stress Intensity Factors in Lozenge Pattern of Joints

K. Hithendra, Raghu V. Prakash

IMECE 2021; V003T03A015doi:https://doi.org/10.1115/IMECE2021-70138

Abstract

View Article

PDF

Topics: Stress

Manufacturing, Integration, and Characterization of Multifunctional Structure and Devices

Influence of Welding Sequence on Residual Stress Evolution in SUS304/Q235 Bimetallic Clad Plate Butt-Welded Joints

Min Zhu, Yansong Zhang, Qiao Zheng, Wei Wu, Weifang Qian, Baosen Wang

IMECE 2021; V003T03A016doi:https://doi.org/10.1115/IMECE2021-69766

Abstract

View Article

PDF

Topics: Finite element analysis , Stress , Welding

Material Processing of Flexible/Emerging Electronics, Sensors, and Devices

Microwave Synthesis of Plant-Based Supercapacitor Electrodes for Flexible Electronics

Siddhi Mehta, Swarn Jha, Weston Stewart, Hong Liang

IMECE 2021; V003T03A017doi:https://doi.org/10.1115/IMECE2021-70062

Abstract

View Article

PDF

Topics: Biomaterials , Electrodes , Flexible electronics , Microwaves , Ultracapacitors

Materials for Biology and Medicine

Pull-Out Force of Bean Plants Grown in Agar With Fluidic Microchannels

Abdul Aziz Azlan, Kai Boon Lim, Abu Samah Zuruzi

IMECE 2021; V003T03A018doi:https://doi.org/10.1115/IMECE2021-72998

Abstract

View Article

PDF

Topics: Agar , Microchannels

Materials Processing and Characterization

X-Ray Computed Tomography (XCT) Scanning Parameters Effects on the Hounsfield Unit (HU) Measurements for AA2011

Ahmad M. R. Baydoun, Ramsey F. Hamade

IMECE 2021; V003T03A019doi:https://doi.org/10.1115/IMECE2021-67415

Abstract

View Article

PDF

Topics: Computerized tomography , Nondestructive evaluation , Resolution (Optics) , Alloys , Computers , Disks , Friction , Metals , Welding , X-rays

Multi Response Optimization of Friction Stir Process Parameters on AA2024 / SiC Composite Fabricated Using Friction Stir Processing

Akash Manickam, Raman Kuppusamy, Sudha Jayaprakasham, Senthil Kumar Velukkudi Santhanam

IMECE 2021; V003T03A020doi:https://doi.org/10.1115/IMECE2021-68010

Abstract

View Article

PDF

Topics: Composite materials , Corrosion , Friction , Optimization , Tensile strength , Aluminum , ASTM International , Corrosion resistance , Mechanical properties , Metal matrix composites

Compressive Stress Relaxation (CSR) Testing of Elastomers

Dilip Menon, Robert J. Michael, David Gee

IMECE 2021; V003T03A021doi:https://doi.org/10.1115/IMECE2021-68181

Abstract

View Article

PDF

Topics: Compression , Compressive stress , Elastomers , Relaxation (Physics) , Sealing (Process) , Testing , Biomedicine , Databases , Heat , Pipes

Mechanical and Thermal Characterization of Silica Particle-Reinforced Polymer Composites

Hassan K. Langat, J. K. Keraita, F. M. Mwema, E. T. Akinlabi

IMECE 2021; V003T03A022doi:https://doi.org/10.1115/IMECE2021-68595

Abstract

View Article

PDF

Topics: Composite materials , Particulate matter , Polymer composites , Polymers , Thermal characterization , Tensile strength , Absorption , Elastic moduli , Heat , Impact strength

Effect of Moisture Absorption on the Tensile and Flexural Properties of Glass Fiber Reinforced Composite Materials

Raghu V. Prakash, Vishnu Viswanath

IMECE 2021; V003T03A023doi:https://doi.org/10.1115/IMECE2021-69865

Abstract

View Article

PDF

Topics: Absorption , Finite element analysis , Glass fiber reinforced composites , Mechanical properties

Crystalline Phase Changes Due to High-Speed Projectiles Impact on HY100 Steel

Muna Slewa

IMECE 2021; V003T03A024doi:https://doi.org/10.1115/IMECE2021-69956

Abstract

View Article

PDF

Topics: Phase transitions , Projectiles , Steel , Electron backscatter diffraction , Plates (structures) , Alloys , Corrosion resistance , Damage , Ductility , Fracture toughness

A Novel Mean Stress-Independent Fatigue Model for Bonded Joints With Ductile Adhesives

Marco Gerini-Romagnoli, Sayed A. Nassar

IMECE 2021; V003T03A025doi:https://doi.org/10.1115/IMECE2021-70176

Abstract

View Article

PDF

Topics: Adhesives , Fatigue , Stress , Displacement , Fatigue testing , Alloys , Aluminum , Creep , Durability , Fatigue failure

Improved Tensile Strength and Electrical Conductivity of the Electrical Conductor Aluminum Alloy 6201

Alyaqadhan Allamki, Majid Al-Maharbi, Ramanathan Arunachalam, Sayyad Zahid Qamar

IMECE 2021; V003T03A026doi:https://doi.org/10.1115/IMECE2021-70245

Abstract

View Article

PDF

Topics: Aluminum alloys , Electrical conductivity , Heat treating (Metalworking) , Precipitation , Tensile strength

EBSD Investigation of Ti6Al4V Alloy Processed by Constrained Groove Pressing and Heat Treatment

A. Bhardwaj, N. Gohil, A. Sharma, K. Lakshman Rao, A. K. Gupta, S. S. Satheesh Kumar

IMECE 2021; V003T03A027doi:https://doi.org/10.1115/IMECE2021-70393

Abstract

View Article

PDF

Topics: Alloys , Deformation , Electron backscatter diffraction , Heat treating (Metalworking) , Pressing , Texture (Materials)

Experimental Approach and Conventional Analytical Techniques to the Carbon Nanotube Network Interphase in 3-Phase Polymer Matrix Nano-Composites

Masoud Yekani Fard, Joel Swanstrom

IMECE 2021; V003T03A028doi:https://doi.org/10.1115/IMECE2021-70589

Abstract

View Article

PDF

Topics: Atomic force microscopy , Carbon nanotubes , Nanocomposites , Polymers

Corrosion Performance of Different Aluminum Alloy Deposits Fabricated by Lateral Friction Surfacing

William Relue, Ebrahim Seidi, Lloyd H. Hihara, Scott F. Miller

IMECE 2021; V003T03A029doi:https://doi.org/10.1115/IMECE2021-70717

Abstract

View Article

PDF

Topics: Aluminum alloys , Coating processes , Coatings , Corrosion , Friction

Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite

Ankit Sharma, Akula Sai Pratyush, Srinitesh M., Amit Kumar Gupta, Ravindran Sujith

IMECE 2021; V003T03A030doi:https://doi.org/10.1115/IMECE2021-71258

Abstract

View Article

PDF

Topics: Alloys , Aluminum alloys , Composite materials , Graphene , Heat treating (Metalworking)

Constitutive Modeling and Validation of Sintered Metal Powders Subjected to Large Strains and High Strain Rates

Ashby West, Garrett Venable, Michael Flanagan, Evan Harris, Brad G. Davis, F. Todd Davidson, Joseph Hanus

IMECE 2021; V003T03A031doi:https://doi.org/10.1115/IMECE2021-71461

Abstract

View Article

PDF

Topics: Ammunition , Equations of state , Metal powders , Modeling

Chemical Structure Analysis of Carbon-Doped Silicon Oxide Thin Films by Plasma-Enhanced Chemical Vapor Deposition of Tetrakis(Trimethylsilyloxy)Silane Precursor

Jacob Comeaux, William B. Wirth, Justin Courville, Lingyiqian Luo, Hui Yan, Seonhee Jang

IMECE 2021; V003T03A032doi:https://doi.org/10.1115/IMECE2021-72026

Abstract

View Article

PDF

Topics: Carbon , Plasma-enhanced chemical vapor deposition , Silicon , Thin films

Effect of Morphological Changes in Reused AlSi10Mg Powder on the Formation of Defects in Components Manufactured by SLM

María Guadalupe Orozco Sandoval, Moisés Hinojosa Rivera

IMECE 2021; V003T03A033doi:https://doi.org/10.1115/IMECE2021-72226

Abstract

View Article

PDF

Topics: Additive manufacturing , Aeronautics , Biomedicine , Blades , Cycles , Density , Disks , Gas flow , Lasers , Manufacturing

Wear Behavior of Grinding Wheels With Superficial Cooling Channels

P. Capela, S. F. Carvalho, S. Costa, S. Souza, M. Pereira, L. Carvalho, J. R. Gomes, D. Soares

IMECE 2021; V003T03A034doi:https://doi.org/10.1115/IMECE2021-72319

Abstract

View Article

PDF

Topics: Cooling , Grinding wheels , Wear , Wear resistance

Solder Paste Additives for Thermal Expansion Control

P. Capela, M. S. Souza, S. Costa, M. Fernandes, H. Figueiredo, R. Alves, I. Delgado, J. Teixeira, D. Soares

IMECE 2021; V003T03A035doi:https://doi.org/10.1115/IMECE2021-72478

Abstract

View Article

PDF

Topics: Solders , Thermal expansion

On the Fatigue Properties of 3D Steel Structures Welded Onto Ceramics

Seyed M. Allameh, Douglas Alexander, Roger Miller, Avery Lenihan, Hadi Allameh

IMECE 2021; V003T03A036doi:https://doi.org/10.1115/IMECE2021-72572

Abstract

View Article

PDF

Topics: Ceramics , Fatigue properties , Steel , Metals , Stress , Welding , Reliability , Testing , Additive manufacturing , Base metals

Ultrasound Assisted Production of Metal Foam From Polyurethane Precursor

Asima Zahoor, Abdel-Hamid I. Mourad

IMECE 2021; V003T03A037doi:https://doi.org/10.1115/IMECE2021-73192

Abstract

View Article

PDF

Topics: Metal foams , Sintering , Ultrasound , Urethane elastomers

Recent Developments in Processing and Characterization of Metal Foam: Review

Asima Zahoor, Abdel-Hamid I. Mourad

IMECE 2021; V003T03A038doi:https://doi.org/10.1115/IMECE2021-73258

Abstract

View Article

PDF

Topics: Metal foams

Investigation of the Effect and Contribution of Process Parameters By Taguchi and ANOVA Analysis on the Morphological and Electrical Properties of RF Magnetron Sputtered SiO₂ Over Si Substrate

Sajid Mahfuz Uchayash, Prosanto Biswas, Meah Imtiaz Zulkarnain, Ahmed Touhami, Nazmul Islam, Hasina Huq

IMECE 2021; V003T03A039doi:https://doi.org/10.1115/IMECE2021-73849

Abstract

View Article

PDF

Topics: Electrical properties , Sputtering (Irradiation) , Thin films , Pressure , Gas flow , Signal to noise ratio , Capacitance , Electrical resistivity , Electrochemical impedance spectroscopy , Experimental design

Mechanics of Adhesion and Friction

Characterization of Lateral Friction Surfaced AA6063 Coatings

Ebrahim Seidi, Scott F. Miller

IMECE 2021; V003T03A040doi:https://doi.org/10.1115/IMECE2021-67839

Abstract

View Article

PDF

Topics: Coatings , Friction

Effect of Cyclic Corrosion and Joining Method on the Strength of Multimaterial Double Lap Joints

Marco Gerini Romagnoli, Chao Yang, Sayed A. Nassar

IMECE 2021; V003T03A041doi:https://doi.org/10.1115/IMECE2021-71154

Abstract

View Article

PDF

Topics: Corrosion , Joining , Bonding , Adhesives , Aluminum , Carbon , Cycles , Epoxy adhesives , Epoxy resins , Fibers

Modeling and Experimentation of Geomaterials

Holmquist-Johnson-Cook Constitutive Model Validation and Experimental Study on the Impact Response of Cellular Concrete

Jack Collard, Jake Lanham, Brad G. Davis

IMECE 2021; V003T03A042doi:https://doi.org/10.1115/IMECE2021-71914

Abstract

View Article

PDF

Topics: Constitutive equations , Lightweight concrete , Testing

Modeling and Experimentation of Polymer Mechanics

Investigation of Pore Size Distribution and Mechanical Properties of Porous Polydimethylsiloxane (PDMS) Structures Using Solvent Evaporation Technique

Mohammad Abshirini, M. Cengiz Altan, Yingtao Liu, Mrinal C. Saha

IMECE 2021; V003T03A043doi:https://doi.org/10.1115/IMECE2021-70816

Abstract

View Article

PDF

Topics: Evaporation , Mechanical properties , Phase separation , Plasma desorption mass spectrometry , Polymer solutions , Bone , Elastic moduli , Heat treating (Metalworking) , Heptane , Manufacturing

Modelling the Time-Dependent Behavior of Elastomers Using Fractional Viscoelastic Material Formulations

Arne Leenders, Hamed Vahdati Zadeh, Matthias Wangenheim

IMECE 2021; V003T03A044doi:https://doi.org/10.1115/IMECE2021-71178

Abstract

View Article

PDF

Topics: Elastomers , Modeling , Viscoelastic materials , Damping , Excitation , Simulation , Displacement , Finite element analysis , Rheology , Stress

Temperature-Dependent Impact Properties of ABS Polymer

Max Kratzok, Anil Saigal, Michael Zimmerman

IMECE 2021; V003T03A045doi:https://doi.org/10.1115/IMECE2021-71382

Abstract

View Article

PDF

Topics: Glass transition , Polymers , Temperature

Modeling, Simulation, and Design of Multifunctional Materials

A Finite Element Based Method to Predict and Tailor the Energy Associated With Snap-Through Buckling of a Curved Beam

Catherine S. Florio

IMECE 2021; V003T03A046doi:https://doi.org/10.1115/IMECE2021-67793

Abstract

View Article

PDF

Topics: Buckling , Design , Finite element analysis

Multilayer Separation Effects on MoS2 Membranes in Water Desalination

Peter Ozaveshe Oviroh, Sunday Temitope Oyinbo, Sina Karimzadeh, Tien-Chien Jen

IMECE 2021; V003T03A047doi:https://doi.org/10.1115/IMECE2021-69156

Abstract

View Article

PDF

Topics: Membranes , Reverse osmosis , Separation (Technology) , Water desalination

Atomistic Simulation of Interface Effects in Hybrid Carbon Fiber Reinforced Polymer Composites Incorporating ZnO Nanowires

Parisa Marashizadeh, Mohammad Abshirini, Mrinal C. Saha, Liangliang Huang, Yingtao Liu

IMECE 2021; V003T03A048doi:https://doi.org/10.1115/IMECE2021-70772

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Composite materials , Molecular dynamics , Nanowires , Simulation

First-Ply Failure Pressure of Symmetric Laminated Hybrid Composite CNG Tank

Ganesh Shrigandhi, Mihil Shah, Basavaraj S. Kothavale

IMECE 2021; V003T03A049doi:https://doi.org/10.1115/IMECE2021-70945

Abstract

View Article

PDF

Topics: Composite materials , Failure , Pressure

Analysis of Liner Deformation Behaviour in Transtibial Prosthesis

Srinivasa Prakash Regalla, Kirange Piyush Prashant, Harshal Vinayak Dhake, Prakash Narayan Shrivastava

IMECE 2021; V003T03A050doi:https://doi.org/10.1115/IMECE2021-71483

Abstract

View Article

PDF

Topics: Deformation , Prostheses

A Study on the Onset of Secondary Hydriding in Defective Zr-2 Fuel for Boiling Water Reactors

Doctor Enivweru, Qingyu Wang, Abiodun Ayodeji, Ayouba Moussa Hassane

IMECE 2021; V003T03A051doi:https://doi.org/10.1115/IMECE2021-73284

Abstract

View Article

PDF

Topics: Boiling water reactors , Fuels , Hydrogen , Hydrogen embrittlement , Zirconium , Neutrons , Accidents , Bridges (Structures) , Cladding systems (Building) , Cooling

Multifunctional Composite/Safety Materials

Corrosion Mitigation for Mechanically-Fastened Fiber-Reinforced-Polymer Composites

Moira Callahan, Ruby Romsland, Kenneth J. McDonald, Brad C. McCoy

IMECE 2021; V003T03A052doi:https://doi.org/10.1115/IMECE2021-67967

Abstract

View Article

PDF

Topics: Composite materials , Corrosion , Fibers , Polymers

3D-Printed Hierarchical Re-Entrant Honeycomb With Improved Structural Stability Under Quasi-Static Compressive Loading

Chi Zhan, Mingzhe Li, Robert McCoy, Linda Zhao, Weiyi Lu

IMECE 2021; V003T03A053doi:https://doi.org/10.1115/IMECE2021-68961

Abstract

View Article

PDF

Topics: Absorption , Additive manufacturing , Honeycomb structures , Structural stability

Multiscale Modelling of Multifunctional Composites: A Review

Sandeep Suresh Babu, Abdel-Hamid I. Mourad

IMECE 2021; V003T03A054doi:https://doi.org/10.1115/IMECE2021-73276

Abstract

View Article

PDF

Topics: Composite materials , Modeling

Multifunctional Energy Storage Materials and Systems

Mechanical-Electrical Behavior of Multifunctional Energy Storage Composites

Anthony Bombik, Sung Yeon Sara Ha, Amir Nasrollahi, Mohammad Faisal Haider, Fu-Kuo Chang

IMECE 2021; V003T03A055doi:https://doi.org/10.1115/IMECE2021-71456

Abstract

View Article

PDF

Topics: Batteries , Composite materials , Energy storage

Multifunctional Intelligent Materials and Systems

Parametric Optimization of SMA Torsional Actuators for Aircraft Morphing Applications

Christopher Summers, Jonathan M. Weaver-Rosen, Anargyros A. Karakalas, Richard J. Malak, Jr., Dimitris C. Lagoudas

IMECE 2021; V003T03A056doi:https://doi.org/10.1115/IMECE2021-73206

Abstract

View Article

PDF

Topics: Actuators , Aircraft , Optimization , Design , Dimensions , Engineers , Torque , Cooling , Stress , Transportation systems

Nanoengineered, Nano Modified, Hierarchical, Multi-Scale Materials and Structures

Fabrication, Processing and Characterization of Carbon Fibre Reinforced Laminated Composite Embedded With Graphene Lattice Sheets

Vishwas S. Jadhav, Ajit D. Kelkar

IMECE 2021; V003T03A057doi:https://doi.org/10.1115/IMECE2021-71191

Abstract

View Article

PDF

Topics: Cantilever beams , Carbon fibers , Composite materials , Graphene , Manufacturing

Graphene Oxide / Nanodiamond Nanocomposites Characterized via Particle Dispersion and Micro- and Nanoscale Mechanical Properties

Mustafa Abdelrahman, Slade C. Jewell, Abdalla Elbella, Shannon J. Timpe

IMECE 2021; V003T03A058doi:https://doi.org/10.1115/IMECE2021-72137

Abstract

View Article

PDF

Topics: Graphene , Mechanical properties , Nanocomposites , Nanoscale phenomena , Particulate matter

Nanomaterials for Energy

Potentials for PdAgCu Metal Hydrides Energy Simulations

Iyad Hijazi, Chaonan Zhang, Robert Fuller

IMECE 2021; V003T03A059doi:https://doi.org/10.1115/IMECE2021-71494

Abstract

View Article

PDF

Topics: Engineering simulation , Hydrogen , Metals , Simulation , Alloys , Mechanical properties , Palladium , Permeability , Sulfur , Absorption

Processing of Ceramics and Composites for Additive and Advanced Manufacturing

Additive Manufacturing With Ceramics

Jesse Campanella, Ivan Figueroa-Cecco, Ian Fujinaka, Adam Sasek, Margaret Nowicki, Lionel Vargas-Gonzalez, Nicholas Ku

IMECE 2021; V003T03A060doi:https://doi.org/10.1115/IMECE2021-70601

Abstract

View Article

PDF

Topics: Additive manufacturing , Ceramics , Augers , Slurries , Army , Ceramic composites , Design , Microscopes , Modeling , Photopolymers

Investigation on Tool Performance in Ultrasonic Vibration Assisted Cutting SiC_f/SiC Ceramic Matrix Composites

Yi-feng Xiong, Wen-hu Wang, Yao-yao Shi, Rui-song Jiang, Bo Huang, Cong Liu, Xiao-fen Liu, Xiao-xiang Zhu

IMECE 2021; V003T03A060adoi:https://doi.org/10.1115/IMECE2021-72527

Abstract

View Article

PDF

Topics: Composite materials , Cutting , Silicon carbide ceramics , Vibration

Recent Developments in Tribology

Study on Tribological Behaviour of ZnO Nano Additives Suspended in SAE 20W-50 Engine Oil

Sherif Elsoudy, Sayed Akl, Ahmed A. Abdel-Rehim, Serag Salem

IMECE 2021; V003T03A061doi:https://doi.org/10.1115/IMECE2021-66843

Abstract

View Article

PDF

Topics: ASTM International , Engines , Lubricants , Stability , Tribology , Friction , Disks , Fourier transform infrared spectroscopy , Internal combustion engines , Lubrication