Skip to Main Content
American Society of Mechanical Engineers: Digital Collection Open Menu
Cart
header search
Search
Advanced Search
Skip Nav Destination

Proceedings Papers

Proceedings Volume Cover
ASME 2018 International Mechanical Engineering Congress and Exposition
November 9–15, 2018
Pittsburgh, Pennsylvania, USA
Conference Sponsors:
  • ASME
ISBN:
978-0-7918-5201-9
Volume 2: Advanced Manufacturing

Advanced Manufacturing

Advanced Machining and Finishing

Experimental and Theoretical Investigations on Tool Wear and Surface Quality in Micro Milling of SiCp/Al Composites Under Dry and MQL Conditions
Ben Deng, Haowei Wang, Fangyu Peng, Rong Yan, Lin Zhou
IMECE 2018; V002T02A001https://doi.org/10.1115/IMECE2018-86071
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Milling , Surface quality , Wear , Particulate matter , Cutting , Abrasion , Engineering simulation , Lubrication , Machining
Determining Cutting Pressure Coefficients for Aluminum 6061-T6 Using a Small Number of Drilling Experiments
Charbel Y. Seif, Ilige S. Hage, Ramsey F. Hamade
IMECE 2018; V002T02A002https://doi.org/10.1115/IMECE2018-86224
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Aluminum , Cutting , Drilling , Pressure , Thrust , Torque , Matlab , Bits (Tools) , Drills (Tools) , Machining
Influence of Surface Pretreatment on the Hydrophobic Silane Coating on AISI 304 Steel
Akinsanya Damilare Baruwa, Oluseyi Philip Oladijo, Nthabiseng Maledi, Esther Titilayo Akinlabi
IMECE 2018; V002T02A003https://doi.org/10.1115/IMECE2018-86256
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coatings , Steel , Electrochemical impedance spectroscopy , Plasmas (Ionized gases) , Silicon , Atomic force microscopy , Bonding , Corrosion protection , Durability , Fourier transform infrared spectroscopy
Acoustic Signal Analysis for Prediction of Flank Wear During Conventional Milling
Travis Roney, Anthony Bauccio, Derek Shaffer, Paige Lorson, Ihab Ragai, David Loker, Chetan Nikhare
IMECE 2018; V002T02A004https://doi.org/10.1115/IMECE2018-86886
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Acoustics , Milling , Signals , Wear , Acoustic emissions , Failure , Machining
Studies on Cryogenic Treated Drills Under Nano-Fluid Based Reduced Quantity Lubrication Conditions for Machining Ti6Al4V
D. Samuel Raj, Jerome Arul Praveen C., Aarthi S. Kumaran
IMECE 2018; V002T02A005https://doi.org/10.1115/IMECE2018-86941
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Drills (Tools) , Lubrication , Machining , Nanofluids , Coolants , Cutting , Fluids , Compressors , Drilling , Economics
Study on Grinding Force and Surface Roughness of Ni3Al Based Superalloy
Xiaoxiang Zhu, Wenhu Wang, Ruisong Jiang, Xiaofen Liu
IMECE 2018; V002T02A006https://doi.org/10.1115/IMECE2018-86959
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Grinding , Superalloys , Surface roughness , Grinding wheels , Aircraft engines , Creep , High temperature , Intermetallic compounds , Machinability , Surface quality
Study on Turning of Non-Axisymmetric Three-Dimensional Curved Surfaces
Taichi Mori, Yoshitaka Morimoto, Akio Hayashi, Yoshiyuki Kaneko, Naohiko Suzuki, Ryo Hirono
IMECE 2018; V002T02A007https://doi.org/10.1115/IMECE2018-87377
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer numerical control machine tools , Control equipment , Cutting , Displacement , Errors , Gages , Grinding equipment , Lasers , Linear motors , Machinery
Effect of Rake Angle and Feed Rate on the Surface Quality While Turning In Situ TiB2/7050 Al Metal Matrix Composites
Kunyang Lin, Wenhu Wang, Ruisong Jiang, Yifeng Xiong
IMECE 2018; V002T02A008https://doi.org/10.1115/IMECE2018-87399
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Metal matrix composites , Surface quality , Turning , Composite materials , Stress , Machinability , Surface roughness , Alloys , Diamonds , Materials properties
Investigating the Effect of Tool Coating on Cutting Forces and Tool Wear During Micro-Milling of Polycarbonate Glass
Craig Hanson, Xingbang Chen, Muhammad P. Jahan, Jianfeng Ma, Gregory K. Arbuckle
IMECE 2018; V002T02A009https://doi.org/10.1115/IMECE2018-87441
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coatings , Cutting , Glass , Micromilling , Wear , Computer simulation , Titanium , Abrasion , Aluminum , Biomedicine
Orthogonal Machining of Copper Alloy With a Hardness Gradient
Lewis N. Payton
IMECE 2018; V002T02A010https://doi.org/10.1115/IMECE2018-87524
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Copper alloys , Machining , Shear (Mechanics) , Copper , Data collection , Hardness (Materials)
An Experimental Investigation of Inclined Hole Drilling for CFRP Under Various Lubrication Techniques
Sathish Kannan, Salman Pervaiz, Abhishek Ghoshal
IMECE 2018; V002T02A011https://doi.org/10.1115/IMECE2018-87550
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carbon reinforced plastics , Drilling , Lubrication , Fibers , Stiffness , Aerospace industry , Cutting , Delamination , Fatigue , Finishes
Dislocation Theory of Orthogonal Metal Cutting of Cu-Zn Alloys
Lewis N. Payton
IMECE 2018; V002T02A012https://doi.org/10.1115/IMECE2018-87634
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Alloys , Dislocations (Crystals) , Metal cutting , Shear (Mechanics) , Copper , Dislocation density , Work hardening
Investigation and Modeling of Flag Generation in Honeycomb Sandwich Panel Machining
Derek M. Yip-Hoi, David D. Gill
IMECE 2018; V002T02A013https://doi.org/10.1115/IMECE2018-87706
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Honeycomb structures , Machining , Modeling , Cutting , Cutting tools , Stiffness , Aerospace industry , Aircraft , Anisotropy , Blades
A Numerical Study to Investigate the Influence of Edge Preparation in Vibration Assisted Machining
Salman Pervaiz, Sathish Kannan, Wael Abdel Samad
IMECE 2018; V002T02A014https://doi.org/10.1115/IMECE2018-87731
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Machining , Vibration , Cutting , Cutting tools , Metal cutting , Geometry , Brittleness , Coating processes , Coatings , Computer simulation
Process Planning Strategies to Reduce Energy Consumption in Machining
Arun Unnikrishnan, P. V. M. Rao
IMECE 2018; V002T02A015https://doi.org/10.1115/IMECE2018-87735
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Energy consumption , Machining , Production planning , Finishing , Cutting , Energy conservation , Grinding , Machinery , Reliability
A Comparison of the Effects of Wire Electrical Discharge Machining Parameters on the Processing of Traditionally Manufactured and Additively Manufactured 316L Stainless Steel Specimens
Gregory Bicknell, Guha Manogharan
IMECE 2018; V002T02A016https://doi.org/10.1115/IMECE2018-88014
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Electrical discharge machining , Stainless steel , Wire , Machining , Cutting , Cylinders , Surface roughness , Aerospace industry , Finishes
Experimental Study on Machining of Hybrid Composite Stacks Using Submerged Abrasive Waterjet Machining Process
Mayur Narkhede, Sagil James
IMECE 2018; V002T02A017https://doi.org/10.1115/IMECE2018-88179
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Machining , Carbon reinforced plastics , Titanium , Cavities , Grain size , Cracking (Materials) , Delamination , Fracture (Process) , Machinery
Measuring Points Selection for Laser Tracker Measurement of Five-Axis Machine Tool
Qingzhao Li, Wei Wang, Hai Li, Jing Zhang, Zhong Jiang
IMECE 2018; V002T02A018https://doi.org/10.1115/IMECE2018-88314
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Lasers , Machine tools , Errors , Optimization , Construction , Robotics
Scanning Electron Microscopy and Optical Profilometry of Electropolished Additively Manufactured 316 Steel Components
Pawan Tyagi, Tobias Goulet, Denikka Brent, Kate Klein, Francisco Garcia-Moreno
IMECE 2018; V002T02A019https://doi.org/10.1115/IMECE2018-88339
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Scanning electron microscopy , Steel , Electrolytic polishing , Surface roughness , Contamination , Electrolytes , Failure , Fatigue , Machining
Chemical Polishing Based Surface Finishing of 3D Printed Steel Components
Pawan Tyagi, Tobias Goulet, Nitt Chuenprateep, Robert Stephenson, Rudolph Knott, Antione Reddick, Devdas Shetty, Justin Schlitzer, Cordell Benton, Francisco Garcia-Moreno
IMECE 2018; V002T02A020https://doi.org/10.1115/IMECE2018-88378
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Polishing , Steel , Surface finishing , Metals , Surface roughness , Lasers , Mechanical properties

Advanced Material Forming

Simulation and Experiment Research on Squeeze Casting Combined With Forging of Automobile Control Arm
Liang Zhenglong, Zhang Qi
IMECE 2018; V002T02A021https://doi.org/10.1115/IMECE2018-86006
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Automobiles , Casting , Forging , Simulation , Heat treating (Metalworking) , Mechanical properties , Microhardness , Temperature , Aluminum castings , Particulate matter
The Effect of Local Force Control on Punch Forces During Panel Forming
William J. Emblom
IMECE 2018; V002T02A022https://doi.org/10.1115/IMECE2018-86030
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Blanks , Control panels , Failure , Feedback , Force control , Robustness , Tooling , Transducers
Effect of Preform During Low Pressure Tube Hydroforming
Ashley Trott, Chetan P. Nikhare
IMECE 2018; V002T02A023https://doi.org/10.1115/IMECE2018-86090
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Preforms , Pressure , Buckling , Aerospace industry , Fluids , Geometry , Manufacturing , Materials properties , Shapes , Welding
Determination of Thermal Parameters of a Work-Roll in Warm Rolling Using Inverse Modeling
Vinod Yadav
IMECE 2018; V002T02A024https://doi.org/10.1115/IMECE2018-86106
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Modeling , Finite element methods , Convection , Errors , Temperature , Thermal properties , Fatigue life , Fracture toughness , Plane strain , Stability
Friction Stir Back Extrusion: Preliminary Investigations on Through-Wall Characteristics for Al-1100-O
Austin Menard, Clarissa Gallardo, William J. Emblom, Scott W. Wagner, Ayotunde Olayinka, Clayton Loehn, Daniel Seguin, Muhammad A. Wahab
IMECE 2018; V002T02A025https://doi.org/10.1115/IMECE2018-86318
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Extruding , Friction , Manufacturing , Microscale devices , Aluminum , Biomedicine , Cutting , Fuel cells , Heat exchangers , Metals
Springback Analysis in Hybrid Material Deformation
Elizabeth M. Mamros, Chetan P. Nikhare
IMECE 2018; V002T02A026https://doi.org/10.1115/IMECE2018-86455
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Deformation , Metals , Design , Materials properties , Shapes , Composite materials , Manufacturing , Metallic composites , Weight (Mass) , Adhesives
Technology Development and Tool Concepts for High-Temperature Forming of Titanium
Dirk Landgrebe, Matthias Demmler, Andre Albert, Frank Schieck, Martin Weber
IMECE 2018; V002T02A027https://doi.org/10.1115/IMECE2018-86660
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: High temperature , Technology development , Titanium , Manufacturing , Blanks , Biomedicine , Coatings , Sheet metal , Temperature , Tribology
A New Incremental Bending System to Form Curved Metal Plate by Experiment and Finite Element Simulation
Xiaobing Dang, Kai He, Feifei Zhang, Qiyang Zuo, Ruxu Du
IMECE 2018; V002T02A028https://doi.org/10.1115/IMECE2018-86800
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finite element analysis , Metals , Simulation , Computer software , Errors , Hardware , Heating , Hull , Shipbuilding
Utilization of Wavy Toolpath in Single-Point Incremental Forming
Tyler J. Grimm, Ihab Ragai, John T. Roth
IMECE 2018; V002T02A029https://doi.org/10.1115/IMECE2018-86885
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer numerical control machine tools , Geometry , Sheet materials , Tooling , Vibration , Waves
Effect of Process Parameters on the Electrically-Assisted Sintered Iron-Copper Powder Metals
Ihab Ragai, Matt Schwabenbauer, Seray Eser, Michael Müller
IMECE 2018; V002T02A030https://doi.org/10.1115/IMECE2018-86891
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Copper , Iron , Metals , Sintering , Electric current , Furnaces
Tube Buckling: An Advantage to Tube Shaping
Chetan P. Nikhare
IMECE 2018; V002T02A031https://doi.org/10.1115/IMECE2018-86910
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Buckling , Shapes , Friction , Fluids , Manufacturing
A Numerical Study on Rotational Tube Flaring Process
Chetan P. Nikhare
IMECE 2018; V002T02A032https://doi.org/10.1115/IMECE2018-86918
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Aerospace industry , Explosives , Failure , Fuels , Manufacturing , Rotation , Sales , Sheet metal , Transportation systems , Vehicles
Experimental Analysis and Testing of the Hemming Process Types Utilized in the Automotive Industry
Pablo Alberto Limon-Leyva, Pedro de Jesús García-Zugasti, Antonio de J. Balvantín-García, José A. Diosdado de la Peña, Isidro de Jesus Sanchez-Arce, Eder Hazael Govea-Valladares
IMECE 2018; V002T02A033https://doi.org/10.1115/IMECE2018-87232
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Automotive industry , Experimental analysis , Testing , Aluminum , Hydraulic presses , Tooling
Novel Approach for Tension Testing Micro Tubes
Scott W. Wagner, William J. Emblom, Kevin M. Johnson, Kahaan P. Shah, Navrose Handa, Nihal Kapare
IMECE 2018; V002T02A034https://doi.org/10.1115/IMECE2018-87244
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Tensile testing , Mechanical properties , Engineering simulation , Machinery , Simulation , Stainless steel , Stress , Testing
Effect of Pre-Bending on Formability of DQ Steel and Al 5182
Shabbir Memon, Obaidur Rahman Mohammed, Hamid M. Lankarani
IMECE 2018; V002T02A035https://doi.org/10.1115/IMECE2018-87321
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compression , Ductility , Engineering simulation , Finite element analysis , Fracture (Materials) , Simulation , Steel , Strain gradient , Tension , Tube bending
Development of Processing Map for Superplastic Deformation of Ti-6Al-4V Alloy
Mohd Abdul Wahed, Amit Kumar Gupta, Nitin Ramesh Kotkunde, Swadesh Kumar Singh
IMECE 2018; V002T02A036https://doi.org/10.1115/IMECE2018-88631
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Alloys , Deformation , Superplasticity , Temperature , Flow (Dynamics) , Flow instability , Stress , Energy dissipation , Entropy , Failure

Computational Modeling and Simulation for Advanced Manufacturing

Modeling and Experimental Verification of Torque and Thrust Forces Generated by the Conventional Drill’s Chisel Edge
Charbel Y. Seif, Ilige S. Hage, Ramsey F. Hamade
IMECE 2018; V002T02A037https://doi.org/10.1115/IMECE2018-86155
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Chisels , Modeling , Thrust , Torque , Cutting , Drilling , Dimensions , Drills (Tools) , Machining , Aluminum
Statistically Validated and Optimized Tabu Search Estimation of Cutting Tool Life in Turning
Ré-Mi Hage, Ilige Hage, Chady Ghnatios, Ramsey Hamade
IMECE 2018; V002T02A038https://doi.org/10.1115/IMECE2018-86232
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Algorithms , Cutting tools , Errors , Experimental design , Machine tools , Regression analysis , Turning , Wear
The Mechanistic Process Comparison Between a Novel Slotted Injection Manifold Versus the Multiple Injection Manifold of a Low Pressure Square Type Atomic Layer Deposition Reactor
Rigardt Alfred Maarten Coetzee, Tien-Chien Jen
IMECE 2018; V002T02A039https://doi.org/10.1115/IMECE2018-86401
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manifolds , Pressure , Computational fluid dynamics , Flow (Dynamics) , Manufacturing , Nanotechnology , Chemical reactions , Computer simulation , Computer software , Fuel cells
Flexible Fiber Motion in Fiber-Reinforced Composite Material Processing
Diwei Zhang, Xiaobo Peng, Dongdong Zhang
IMECE 2018; V002T02A040https://doi.org/10.1115/IMECE2018-86440
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fiber reinforced composites , Fibers , Materials processing , Fluids , Finite element methods , Boundary-value problems , Deformation , Fluid structure interaction , Poiseuille flow , Rotation
Prediction of Residual Stress and Damage in Thermal Spray Coatings Using Hybrid Computational Approach
Abba A. Abubakar, Abul Fazal M. Arif, Khaled S. Al-Athel, S. Sohail Akhtar
IMECE 2018; V002T02A041https://doi.org/10.1115/IMECE2018-86504
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coatings , Damage , Sprays , Stress , Drops , Finite element analysis , Algorithms , Deformation , Failure , Hydrodynamics
Generation Mechanism of Interfacial Residual Stress and its Effect on Mechanical Properties of Hybrid Fiber-Reinforced Thermoplastic Polymer (HFRTP)
Wan Cao, Ning Kang, Lingyu Sun, Shanshu Xiang, Xudong Yang, Yiben Zhang
IMECE 2018; V002T02A042https://doi.org/10.1115/IMECE2018-86523
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fibers , Mechanical properties , Polymers , Stress , Metal stamping , Hardening (Curing) , Load bearing capacity , Recycling , Shapes , Shrinkage (Materials)
Finite Element Simulation of Backward Micro Extrusion for Annealed Copper
Md Mosleh Uddin, Debabrata Mondal, Paul D. Herrington
IMECE 2018; V002T02A043https://doi.org/10.1115/IMECE2018-86755
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Copper , Extruding , Finite element analysis , Simulation , Compression , Computer software , Displacement , Finishes , Friction , Hardening
Effect of Size Distribution on Optical Absorption During Intense Pulsed Light Sintering of Metal Nanoparticles
Harish Devaraj, Hyun-Jun Hwang, Rajiv Malhotra
IMECE 2018; V002T02A044https://doi.org/10.1115/IMECE2018-87038
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Absorption , Metals , Nanoparticles , Sintering , Bridges (Structures) , Light , Manufacturing , Packing (Shipments) , Packings (Cushioning) , Silver
Feasibility Study of Condition Monitoring for Some Event Around the Crosshead in a Reciprocating Compressor
Yoshifumi Mori, Takashi Saito, Yu Mizobe
IMECE 2018; V002T02A045https://doi.org/10.1115/IMECE2018-87153
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Compressors , Condition monitoring , Failure , Damage , Dimensions , Eigenvalues , Error functions , Resonance
Numerical Modeling of a Pure Water Jet Machining of Ti-6Al-4V and Al 6061-T6 Using ABAQUS and Smoothed Particle Hydrodynamics
Gregory Pasken, J. Ma, M. McQuilling, Muhammad P. Jahan
IMECE 2018; V002T02A046https://doi.org/10.1115/IMECE2018-87271
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer simulation , Hydrodynamics , Machining , Particulate matter , Water , Engineering simulation , Jets , Nanoscale phenomena , Simulation , Cutting
FEM Investigation of Phase Transformation in Vibration Assisted Nano Impact Machining by Loose Abrasives (VANILA)
Nick H. Duong, J. Ma, Muhammad P. Jahan, Shuting Lei, Murali Sundaram
IMECE 2018; V002T02A047https://doi.org/10.1115/IMECE2018-87274
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Abrasives , Finite element methods , Machining , Phase transitions , Vibration , Silicon , Atomic force microscopy , Friction , Nanoscale phenomena , Probes
A Study on Evolution of Splat Radius and Temperature in Thermal Spray Process
Manpreet Dash, Sangharsh Kumar, Partha Pratim Bandyopadhyay, Anandaroop Bhattacharya
IMECE 2018; V002T02A048https://doi.org/10.1115/IMECE2018-87303
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Sprays , Temperature , Drops , Heat transfer , Metals , Manufacturing , Plasma spraying , Spraying (Coating processes) , Alloys , Coating processes
A Numerical Study of Solder Paste Rolling Process for PCB Printing
Ricardo F. Oliveira, Nelson Rodrigues, José Carlos Teixeira, Duarte Santos, Delfim Soares, Maria F. Cerqueira, Senhorinha F. C. F. Teixeira
IMECE 2018; V002T02A049https://doi.org/10.1115/IMECE2018-88035
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Printing , Solders , Viscosity , Blades , Computer simulation , Dimensions , Fluid dynamics , Fluids , Ovens , Reflow soldering
Numerical and Experimental Characterization of Kerf Formation in Abrasive Waterjet Machining
Joseck Nyaporo Nyaboro, Mahmoud A. Ahmed, Hassan El-Hofy, Mohamed El-Hofy
IMECE 2018; V002T02A050https://doi.org/10.1115/IMECE2018-88617
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Experimental characterization , Machining , Geometry , Erosion , Flow (Dynamics) , Modeling , Particle size , Surface quality , Surfaces (Materials)
Multiphysics Modeling and Parametric Analysis of an Inductor for Heating Thin Sheet Materials
Alex J. Mazursky, Hee-Chang Park, Sung-Hyuk Song, Jeong-Hoi Koo
IMECE 2018; V002T02A051https://doi.org/10.1115/IMECE2018-88676
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Heating , Inductors , Modeling , Sheet materials , Electromagnetic induction , Design , Geometry , Heat , Engineering prototypes , Excitation

Congress-Wide Symposium on Additive Manufacturing

Thermal-Mechanical Study of 3D Printing Technology for Rail Repair
Ershad Mortazavian, Zhiyong Wang, Hualiang Teng
IMECE 2018; V002T02A052https://doi.org/10.1115/IMECE2018-86315
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Maintenance , Rails , Temperature , Stress concentration , Cooling , Residual stresses , Stress , Temperature gradient , Thermal analysis
Additive Manufacturing Bead Deposition Based Rotary Tool Path Applications
Ruth Jill Urbanic, Bob Hedrick
IMECE 2018; V002T02A053https://doi.org/10.1115/IMECE2018-86461
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Computer software , Computer-aided design , Metal spraying , Pipes , Production planning , Software development
Utilizing Advanced Manufacturing Technologies to Develop a Reconfigurable Lumbar Puncture Training Model
Besim Kalajdzic, Ruth Jill Urbanic, Andre Khayat, Anna Farias
IMECE 2018; V002T02A054https://doi.org/10.1115/IMECE2018-86851
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing technology , Biological tissues , Biomedicine , Students , Testing , Additive manufacturing , Computer-aided design , Design , Dimensions , Diseases
ODS Coating for Critical Turbine Components Using DED Additive Manufacturing
Eric Chia, Bruce S. Kang, Min Zheng, Yang Li, Minking Chyu
IMECE 2018; V002T02A055https://doi.org/10.1115/IMECE2018-87512
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Coating processes , Coatings , Turbine components , Cycles , Bonding , Lasers , Mechanical properties , Ball milling , Gas turbines
Effect of Process Parameters on Compressive Properties of ULTEM 9085 Produced by FDM Process
Aboma Wagari Gebisa, Hirpa G. Lemu
IMECE 2018; V002T02A056https://doi.org/10.1115/IMECE2018-87523
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Compressive strength , Design , Extruding , Heating , Machinery , Manufacturing , Modeling , Polymers
A Computational Fluid Dynamics (CFD) Study of Material Transport and Deposition in Aerosol Jet Printing (AJP) Process
Roozbeh (Ross) Salary, Jack P. Lombardi, III, Darshana L. Weerawarne, Prahalada K. Rao, Mark D. Poliks
IMECE 2018; V002T02A057https://doi.org/10.1115/IMECE2018-87647
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Aerosols , Computational fluid dynamics , Printing , Geometry , Particulate matter , Aerodynamics , Boundary-value problems , Computerized tomography , Density , Design
Dynamic Behavior of Biologically Inspired 3D Printed Visco-Elastic Heterogeneous Structures
Heather L. Lai, Jennifer Beahan
IMECE 2018; V002T02A058https://doi.org/10.1115/IMECE2018-87845
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Composite materials , Elasticity , Mechanical behavior , Biological tissues , Brittleness , Elastic moduli , Excitation , Finite element analysis , Hard materials
Porosity Analysis in Metal Additive Manufacturing by Micro-CT
Subin Shrestha, Thomas Starr, Kevin Chou
IMECE 2018; V002T02A059https://doi.org/10.1115/IMECE2018-87897
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Metals , Porosity , Density , Lasers , Computerized tomography , Melting , Heat conduction , Resolution (Optics)
Optimization of Design Process of Fused Filament Fabrication (FFF) 3D Printing
Jaeyoon Kim, Bruce S. Kang
IMECE 2018; V002T02A060https://doi.org/10.1115/IMECE2018-87916
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Design , Manufacturing , Optimization , Carbon reinforced plastics , Fibers , Finite element analysis , Design methodology , Mechanical properties , Nylon fabrics
Comparison of Louvered Plate-Fin Heat Exchangers Made via Additive Manufacturing
Michael Bichnevicius, David Saltzman, Stephen Lynch
IMECE 2018; V002T02A061https://doi.org/10.1115/IMECE2018-87941
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Heat exchangers , Design , Surface roughness , Fins , Heat transfer , Manufacturing , Metals , Pressure , Aircraft
Direct Ink Writing of Graphene Oxide Reinforced PDMS Matrix Composites for Improved Mechanical Properties
Chao Liu, Li Jiang, Junjun Ding
IMECE 2018; V002T02A062https://doi.org/10.1115/IMECE2018-88052
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Composite materials , Graphene , Inks , Mechanical properties , Plasma desorption mass spectrometry , Additive manufacturing , Printing , Biocompatibility , Bone , Design
Mechanical Behavior of Octahedral and Octet Structures Produced From CLIP Technology
Gian J. Calise, Anil Saigal
IMECE 2018; V002T02A063https://doi.org/10.1115/IMECE2018-88192
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Carbon , Compression , Elasticity , Failure mechanisms , Foams (Chemistry) , Isotropy , Mechanical behavior , Mechanical properties , Metamaterials
Optimize Additive Manufacturing Post-Build Heat Treatment and Hot Iso-Static Pressing Process Using an Integrated Computational Materials Engineering Framework
Anahita Imanian, Kelvin Leung, Nagaraja Iyyer, Peipei Li, Derek H. Warner
IMECE 2018; V002T02A064https://doi.org/10.1115/IMECE2018-88550
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Heat treating (Metalworking) , Materials science , Pressing , Fatigue , Design , Genetic algorithms , Heat transfer , Manufacturing , Metals
Application of Electrostatic Adhesion Method in Metal-Powder-Based Additive Manufacturing Layer-Forming Process
Teng-Yueh Tsao, Jen-Yuan (James) Chang
IMECE 2018; V002T02A065https://doi.org/10.1115/IMECE2018-88741
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Adhesion , Metals , Particulate matter , Coating processes , Coatings , Diluents , Lasers
Flexible Strain Sensor Using Additive Manufacturing and Conductive Liquid Metal: Design, Fabrication, and Characterization
Austin Smith, Hamzeh Bardaweel
IMECE 2018; V002T02A066https://doi.org/10.1115/IMECE2018-88753
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Design , Liquid metals , Manufacturing , Strain sensors , Sensors , Deformation , Dimensions , Electrical resistance , Elongation

Digital Manufacturing Simulation and Validation

Taxonomy for Secure CyberManufacturing Systems
Mingtao Wu, Young B. Moon
IMECE 2018; V002T02A067https://doi.org/10.1115/IMECE2018-86091
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Damage , Dimensions , Doors , Intellectual property , Machinery , Manufacturing systems , Networks , Security
CyberManufacturing System: A Solution for Sustainable Manufacturing
Zhengyi Song, Young Moon
IMECE 2018; V002T02A068https://doi.org/10.1115/IMECE2018-86092
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Sustainability , Cloud computing , Computer software , Internet , Internet of things , Machine learning , Manufacturing systems , Natural resources , Simulation
A New Design of Cycloidal Planetary Reducer With Internal Cycloidal Profile
He Mao, Guanyi Liu, Deqiang Zeng, Yaning Cao, Kai He, Ruxu Du
IMECE 2018; V002T02A069https://doi.org/10.1115/IMECE2018-86184
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Wheels , Pins (Engineering) , Clearances (Engineering) , Collisions (Physics) , Machine tools , Mechanical efficiency , Robotics , Service life (Equipment) , Stress
Demonstration of an Industrial Framework for an Implementation of a Process Digital Twin
Jonathan M. Eyre, Tony J. Dodd, Chris Freeman, Richard Lanyon-Hogg, Aiden J. Lockwood, Rab W. Scott
IMECE 2018; V002T02A070https://doi.org/10.1115/IMECE2018-87361
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Feedback , Noise (Sound) , Simulation
Virtual Experimental Investigation for Industrial Robotics in Gazebo Environment
Murat Aksu, John L. Michaloski, Frederick M. Proctor
IMECE 2018; V002T02A071https://doi.org/10.1115/IMECE2018-87686
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Robotics , Robots , Simulation , Sensors , Physics , Control systems , Actuators , Algorithms , Buses , Design
Towards a Digital Twin for Cloud Manufacturing: Case Study
Diane Ngo, David A. Guerra-Zubiaga, Germánico González-Badillo, Reza Vatankhah Barenji
IMECE 2018; V002T02A072https://doi.org/10.1115/IMECE2018-87688
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Simulation , Manufacturing cells , Computer-aided design , Control equipment , Conveyor belts , Mechatronics , Pallets
A Digital Twin Concept for Manufacturing Systems
Wesley Ellgass, Nathan Holt, Hector Saldana-Lemus, Julian Richmond, Ali Vatankhah Barenji, Germánico Gonzalez-Badillo
IMECE 2018; V002T02A073https://doi.org/10.1115/IMECE2018-87737
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing systems , Manufacturing , Virtual reality , Artificial intelligence , Cloud computing , Internet , Optimization , Simulation
A Novel Modeling Approach for Solving the Cell Formation Problem
Taras Dmytryshyn, Mohamed Ismail, Ola Rashwan
IMECE 2018; V002T02A074https://doi.org/10.1115/IMECE2018-88128
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Modeling , Algorithms , Optimization
A Novel Framework in Manufacturing Automation to Implement Cyber-Manufacturing Systems
David A. Guerra-Zubiaga, Kathy S. Schwaig, Mason B. Felix, John D. Calfee, Aubrey M. Sims, Tu H. Vo
IMECE 2018; V002T02A075https://doi.org/10.1115/IMECE2018-88243
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Manufacturing automation , Manufacturing systems , Manufacturing industry
Internet of Things in Manufacturing: An Overview
Hussam Ali Alothman, Mohammad T. Khasawneh, Nagen N. Nagarur
IMECE 2018; V002T02A076https://doi.org/10.1115/IMECE2018-88262
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Internet of things , Manufacturing , Internet , Machinery , Manufacturing systems
Digital Factory: Simulation Enhancing Production and Engineering Process
Angella Thomas, David A. Guerra-Zubiaga, John Cohran
IMECE 2018; V002T02A077https://doi.org/10.1115/IMECE2018-88334
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flexible manufacturing systems , Internet of things , Manufacturing , Manufacturing industry , Manufacturing systems , Robots , Simulation
An Internet-of-Things Based Framework for Collaborative Cyber Physical Tasks in Micro Assembly
J. Cecil, Aaron Cecil-Xavier, S. Albuhamood
IMECE 2018; V002T02A078https://doi.org/10.1115/IMECE2018-88542
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Internet of things , Microassembling , Manufacturing , Cyber-physical systems , Algorithms , Collaboration , Cycles , Design , Genetic algorithms , Innovation

Innovative Product Design

A Mathematical Functional Decomposition Approach Through Granularity Partition Process in Quotient Space
Y. T. Li, Y. X. Wang
IMECE 2018; V002T02A079https://doi.org/10.1115/IMECE2018-86217
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Conceptual design , Design , Mathematics
Improve Enterprise Resources Management Through the Usage of IoT in the Shopfloor
Adriana Cunha, João Silva
IMECE 2018; V002T02A080https://doi.org/10.1115/IMECE2018-87589
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Internet of things , Metalworking , Machinery , Manufacturing , Sales , Supply chains
Visualisation and Detection of Road Traffic Events Using Complex Event Processing
Paulo Figueiras, Hugo Antunes, Guilherme Guerreiro, Ruben Costa, Ricardo Jardim-Gonçalves
IMECE 2018; V002T02A081https://doi.org/10.1115/IMECE2018-87909
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Traffic , Visualization , Roads , Vehicles , Accidents , Engineering prototypes , Engines , Flow (Dynamics) , Highways , Safety
Design of Damped Structures to Increase Machine Tool Dynamical Performance
Francesco Aggogeri, Alberto Borboni, Angelo Merlo, Nicola Pellegrini, Riccardo Adamini, Claudio Taesi
IMECE 2018; V002T02A082https://doi.org/10.1115/IMECE2018-87912
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Machine tools , Machining , Carbon reinforced plastics , Aluminum , Engineering prototypes , Iron , Milling , Sandwich structures , Steel
Monitoring, Risk Assessment and Actuation for Alzheimer Patients: A Case Study
Fernando Luís-Ferreira, João Gião, Pedro Corista, Jorge Calado, Joao Sarraipa
IMECE 2018; V002T02A083https://doi.org/10.1115/IMECE2018-88166
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Risk monitoring , Batteries , Diseases , Sustainability
A Future Trend in Sensing Enterprise Systems
Majid Zamiri, Andreia Artifice, Elsa Marcelino-Jesus, Joao Sarraipa, Ricardo Jardim-Goncalves
IMECE 2018; V002T02A084https://doi.org/10.1115/IMECE2018-88530
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Databases , Decision making , Internet , Knowledge management , Profitability , Transparency

Laser-Based Advanced Manufacturing and Materials Processing

Multi-Physics Modeling of Laser Interaction With Surface in Powder Bed Melting Process
Faiyaz Ahsan, Jafar Razmi, Leila Ladani
IMECE 2018; V002T02A085https://doi.org/10.1115/IMECE2018-86566
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Lasers , Melting , Modeling , Physics , Absorption , Heat , Additive manufacturing , Cathode ray oscilloscopes , Electron beams , Gaussian distribution
Ablation Characteristics of Nanosecond Laser Pulsed Ablation of Aluminum
Yeqing Wang, Daniel Diaz, David W. Hahn
IMECE 2018; V002T02A086https://doi.org/10.1115/IMECE2018-87635
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Ablation (Vaporization technology) , Aluminum , Lasers , Laser ablation , Plasmas (Ionized gases) , Damage , Shapes , Aluminum alloys , Nd-YAG lasers , Scanning electron microscopy
Laser Foaming of Polyetherimide (PEI)
Venkateshwarlu Kakumanu, Sriharsha Srinivas Sundarram
IMECE 2018; V002T02A087https://doi.org/10.1115/IMECE2018-88623
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Lasers , Foams (Chemistry) , Biomedicine , Carbon dioxide , Casting , Irradiation (Radiation exposure) , Microscopy , Scanning electron microscopy , Tissue scaffolds

Nanomanufacturing

Numerical Investigation of Internal Forces During Carbon Nanotube Forest Self-Assembly
Taher Hajilounezhad, Matthew R. Maschmann
IMECE 2018; V002T02A088https://doi.org/10.1115/IMECE2018-86567
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carbon nanotubes , Self-assembly , Structural mechanics , Catalysts , Particulate matter , Equilibrium (Physics) , Finite element analysis , Simulation , Stress

Posters

Solution-Gated Ion-Sensitive Field Effect Transistor With Polymer Selective Membrane for Nitrate Detection
Jungyoon Kim, Qingyuan Liu, Tianhong Cui
IMECE 2018; V002T02A089https://doi.org/10.1115/IMECE2018-87918
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Membranes , Polymers , Transistors , Graphene , Sensors , Spin coating , Water
Development of a Low Coefficient of Thermal Expansion Composite Tooling via 3D Printing
Michael Maravola, Pedro Cortes, Michael Juhasz, Douglas Rutana, Bridger Kowalczyk, Brett Conner, Eric MacDonald
IMECE 2018; V002T02A090https://doi.org/10.1115/IMECE2018-88594
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Composite materials , Thermal expansion , Tooling , Invar , Sands , Ceramics , Molding , Printing , Binders (Materials)

Robotics and Automation in Advanced Manufacturing

Efficient Feedrate Optimization Method for Spline Toolpath With Curvature-Base Planning and Accurate Interpolating
Yong Zhang, Mingyong Zhao, Peiqing Ye, Jiali Jiang, Hui Zhang
IMECE 2018; V002T02A091https://doi.org/10.1115/IMECE2018-86162
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Optimization , Splines , Machining , Actuators , Approximation , Engineering simulation , Feedback , Interpolation , Linear programming , Optimization algorithms
Intelligent Decision Making Approach for Performance Evaluation of a Robot-Based Manufacturing Cell
Tavo Kangru, Jüri Riives, Tauno Otto, Meelis Pohlak, Kashif Mahmood
IMECE 2018; V002T02A092https://doi.org/10.1115/IMECE2018-86666
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Decision making , Manufacturing cells , Performance evaluation , Robots , Manufacturing systems , Design , Air conditioners , Artificial intelligence , Automotive industry , Computers
Adaptive Industrial Robots Using Machine Vision
Vladimir Kuts, Tauno Otto, Toivo Tähemaa, Khuldoon Bukhari, Tengiz Pataraia
IMECE 2018; V002T02A093https://doi.org/10.1115/IMECE2018-86720
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Machinery , Robots , Computer programming , Collaboration , Downtime , Engineering simulation , Machine learning , Manufacturing , Manufacturing industry , Matlab
Torch End-Effector and TIG Electrode Changeout Design for a TIG Welding Robot Used in Metal Big Area Additive Manufacturing
Christopher Masuo, Andrzej Nycz, Mark W. Noakes, Jared Bell, Justin Killian, Chandler Oakley, William R. Hamel
IMECE 2018; V002T02A094https://doi.org/10.1115/IMECE2018-86726
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Additive manufacturing , Design , Electrodes , End effectors , Gas tungsten arc welding , Metals , Robots , Printing , Robotics , Welding
VR-Mediated Teleoperation With Glove-Like Interfaces
Kun Chen, Prawesh Dahal, Mariam Avagyan, Kevin Huang
IMECE 2018; V002T02A095https://doi.org/10.1115/IMECE2018-87085
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer software , Control equipment , Feedback , Fluids , Robotics , Sensors , Virtual reality
Control of Continuous Polymer Compounding Fuse Filament Modeling
Connor D. Armstrong, Thomas Carlacci, David Bigio
IMECE 2018; V002T02A096https://doi.org/10.1115/IMECE2018-87114
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Modeling , Polymers , Composite materials , Polyester fibers , Weight (Mass) , Additive manufacturing , Carbon , Extruding , Feedback , Flow (Dynamics)
Welding Robotic Co-Worker Using Brain Computer Interface
Yao Li, Thenkurussi Kesavadas
IMECE 2018; V002T02A097https://doi.org/10.1115/IMECE2018-87503
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Brain , Computers , Robotics , Welding , Robots , Manufacturing , Computer programming , Innovation , Safety , Simulation

Third Symposium on Fastening and Joining Technology

The Effect of Temperature, Thickness, and Working Time on Adhesive Properties
Nicholas Aerne, John P. Parmigiani
IMECE 2018; V002T02A098https://doi.org/10.1115/IMECE2018-86737
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Adhesives , Temperature , Cantilever beams , Design , Bonding , Modeling , Shear (Mechanics) , Temperature effects , Testing
Improvement of Joint Integrity in MIG Welded Steel: A Review
Timothy Odiaka, Nkosinathi Madushele, Stephen Akinlabi
IMECE 2018; V002T02A099https://doi.org/10.1115/IMECE2018-86788
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Steel , Welding , Gas metal arc welding , Optimization , Design , Heat treating (Metalworking) , Manufacturing industry , Mechanical properties , Titanium alloys , Welded joints
Improving the Heat Dissipation From a Pressure Wheel of a Laser Robotic End-of-Arm Tooling Using Different Geometrical Designs and Materials
Abdallah Hamieh, Mike A. Kheirallah, Badih Jawad, Liping Liu, Vernon Fernandez
IMECE 2018; V002T02A100https://doi.org/10.1115/IMECE2018-86880
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Energy dissipation , Heat , Lasers , Pressure , Robotics , Tooling , Wheels , Design , Temperature , Tungsten
Finite Element Analysis of the Load Factor and Design for Bolted T-Shape Flange Joints Consisting of Dissimilar Clamped Parts
Shunichiro Sawa, Yasuhisa Sekiguchi, Toshiyuki Sawa
IMECE 2018; V002T02A101https://doi.org/10.1115/IMECE2018-87335
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Finite element analysis , Flanges , Shapes , Stress , Steel , Aluminum , Bending (Stress) , Finite element methods , Finite element model
Frequency Effect of Torsion on Rotating Bending Fatigue Behavior of Gas Tungsten Arc (GTA) Welded AISI 1018 and AISI 4140 Welded Joints
Saad Aziz, Ahmet Eren, Muhammad A. Wahab
IMECE 2018; V002T02A102https://doi.org/10.1115/IMECE2018-88338
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue , Torsion , Tungsten , Welded joints , Cycles , Base metals , Fatigue life , Steel , Heat , Fracture (Materials)
Estimation and Comparison of Welding Performances Using MRA and GMDH in P-GMAW for SS 316L Material
Rudreshi Addamani, Ravindra Holalu Venkatadas, Ugrasen Gonchikar, Y. D. Chethan
IMECE 2018; V002T02A103https://doi.org/10.1115/IMECE2018-88604
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gas metal arc welding , Welding , Algorithms , Arc welding , Elongation , Gas flow , Heat , Sheet metal , Sprays , Tensile strength
Mathematical Model to Predict Tensile Strength of Underwater Friction Stir Welded (UFSW) on 5052 Aluminium Alloys
Dhanis Paramaguru, Srinivasa Rao Pedapati, Mokhtar Awang, Hamed Mohebbi
IMECE 2018; V002T02A104https://doi.org/10.1115/IMECE2018-88610
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Aluminum alloys , Friction , Tensile strength , Welding , Mechanical properties , Parametric design , Polynomials , Regression analysis , Welding equipment

Variation Simulation and Design for Assembly

Influence of Selective Laser Heat Treatment Pattern Position on Geometrical Variation
Vaishak Ramesh Sagar, Kristina Wärmefjord, Rikard Söderberg
IMECE 2018; V002T02A105https://doi.org/10.1115/IMECE2018-86164
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Heat treating (Metalworking) , Lasers , Materials properties , Blanks , Metal stamping , Automotive industry , Boron , Design , Dimensions , Failure
CAD-Based Tolerance Analysis in Preliminary Design Stages Enabling Early Tolerance Evaluation
Stefan Goetz, Benjamin Schleich, Sandro Wartzack
IMECE 2018; V002T02A106https://doi.org/10.1115/IMECE2018-86396
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer-aided design , Design , Tolerance analysis , Manufacturing , Computer software , Dimensions , Engineering design processes , Engineers , Geometry , Product development
Compliant Variation Analysis for High-Speed Train With Consideration of Welding Distortion
Tao Liu, Yongjun Li, Baowang Li, Zhimin Li, Limin Yao, Sun Jin
IMECE 2018; V002T02A107https://doi.org/10.1115/IMECE2018-86619
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Trains , Welding , Manufacturing , Manufacturing industry , Shrinkage (Materials) , Simulation , Deformation , Design , Dimensions , Mechanical properties
Tolerance Allocation With Simulation-Based Digital Twin for CFRP-Metal Countersunk Bolt Joint
Hua Wang, Mengqian Zhou, Bo Liu
IMECE 2018; V002T02A108https://doi.org/10.1115/IMECE2018-86645
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carbon reinforced plastics , Metals , Simulation , Composite materials , Bolted joints , Computer simulation , Design , Simulation results
Simulation and Optimization of Airframe Assembly Process
Sergey Lupuleac, Nadezhda Zaitseva, Maria Stefanova, Sergey Berezin, Julia Shinder, Margarita Petukhova, Elodie Bonhomme
IMECE 2018; V002T02A109https://doi.org/10.1115/IMECE2018-87058
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Optimization , Simulation , Quadratic programming , Contact mechanics , Wings , Algorithms , Joining , Riveting , Statistical analysis
Efficient Variation Simulation of Spot-Welded Assemblies
Samuel Lorin, Björn Lindau, Roham Sadeghi Tabar, Lars Lindkvist, Kristina Wärmefjord, Rikard Söderberg
IMECE 2018; V002T02A110https://doi.org/10.1115/IMECE2018-87454
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Simulation , Finite element methods , Welding , Computers , Deformation , Manufacturing , Optimization , Product development , Quadratic programming , Uncertainty
All Years

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept