Topics: Alloys , Aluminum , Graphene , Machinability , Metal matrix composites , Composite materials , Cutting , Aluminum alloys , Computer numerical control machine tools , Cutting tools

Machinability Study on SiC Particle Reinforced Aluminum Alloy Composite (SiCp/Al) Material With CVD Diamond Coated End Mills

Alexandro Vargas, Tony Nguyen, Jiancheng Liu

IMECE 2017; V002T02A003https://doi.org/10.1115/IMECE2017-70115

Abstract

View Articletitled, Machinability Study on SiC Particle Reinforced Aluminum Alloy Composite (SiCp/Al) Material With CVD Diamond Coated End Mills

PDF

Topics: Aluminum alloys , Composite materials , Machinability , Particulate matter , Synthetic diamonds , Cutting , Diamonds , Surface roughness , Wear , Ceramics

Theoretical Prediction and Experimental Validation of Dynamic Deformation During Machining of Thin-Walled Structure

Jixiong Fei, Bin Lin, Shuai Yan, Mei Ding, Xiaofeng Zhang, Jin Zhang, Jin Lan

IMECE 2017; V002T02A004https://doi.org/10.1115/IMECE2017-70119

Abstract

View Articletitled, Theoretical Prediction and Experimental Validation of Dynamic Deformation During Machining of Thin-Walled Structure

PDF

Topics: Deformation , Machining , Thin wall structures , Milling , Cantilevers , Computer simulation , Equations of motion , Excitation , Finite element methods , Finite element model

A Design of Experiment to Study the Effects of Cutting Speed and Feed on the Generated Drilling Thrust and Torque in Aluminum Alloys

Charbel Y. Seif, Ilige S. Hage, Fathi Ismail, Ramsey F. Hamade

IMECE 2017; V002T02A005https://doi.org/10.1115/IMECE2017-70689

Abstract

View Articletitled, A Design of Experiment to Study the Effects of Cutting Speed and Feed on the Generated Drilling Thrust and Torque in Aluminum Alloys

PDF

Topics: Aluminum alloys , Cutting , Design , Drilling , Thrust , Torque , Drills (Tools) , Chisels , Computer software , Dynamometers

Study on Thermal Deformation Behavior of Wire Electrical Discharge Machining Thin-Wall Components

Zhen Zhang, Yanming Zhang

IMECE 2017; V002T02A006https://doi.org/10.1115/IMECE2017-70846

Abstract

View Articletitled, Study on Thermal Deformation Behavior of Wire Electrical Discharge Machining Thin-Wall Components

PDF

Topics: Electrical discharge machining , Thermal deformation , Thin wall structures , Wire , Errors , Water pressure , Machining , Mechanical properties , Surface roughness

Influence of Process Parameters on Electrochemical Micromachining of Nimonic 75 Alloy

Hariharan Perianna Pillai, Shamli Chinnakulanthai Sampath, Rajkeerthi Elumalai, Shruthilaya Hariharan, Yuvaraj Natarajan

IMECE 2017; V002T02A007https://doi.org/10.1115/IMECE2017-71147

Abstract

View Articletitled, Influence of Process Parameters on Electrochemical Micromachining of Nimonic 75 Alloy

PDF

Topics: Alloys , Micromachining , Electrolytes , Sodium , Cycles , Gas turbines , Machinery , Machining , Performance , Performance characterization

Analysis of the Cutting Force With Ultrasonic Assisted Manufacturing of Steel (S235JR)

Philipp Zopf, Franz Haas

IMECE 2017; V002T02A008https://doi.org/10.1115/IMECE2017-71238

Abstract

View Articletitled, Analysis of the Cutting Force With Ultrasonic Assisted Manufacturing of Steel (S235JR)

PDF

Topics: Cutting , Manufacturing , Steel , Drilling , Brittleness , Ceramics , Damping , Diamond tools , Force measurement , Glass

RPM-Synchronous Grinding: Control Concepts to Improve Surface Qualities for a Highly Efficient Non-Circular Grinding Approach

Matthias Steffan, Franz Haas, Thomas Spenger

IMECE 2017; V002T02A009https://doi.org/10.1115/IMECE2017-71256

Abstract

View Articletitled, RPM-Synchronous Grinding: Control Concepts to Improve Surface Qualities for a Highly Efficient Non-Circular Grinding Approach

PDF

Topics: Grinding , Grinding wheels , Finishing , Geometry , Grain size , Automotive industry , Control algorithms , Force sensors , Grinding equipment , Machine tools

Low Speed Orthogonal Machining of Pre-Heated FCC:BCC Alloys

Lewis N. Payton

IMECE 2017; V002T02A010https://doi.org/10.1115/IMECE2017-71408

Abstract

View Articletitled, Low Speed Orthogonal Machining of Pre-Heated FCC:BCC Alloys

PDF

Topics: Alloys , Machining , Temperature , Cutting , Geometry , Heat , Heating , Wear , Aluminum , Certainty

Study of Micro Ultrasonic Machining of CFRP/Ti Stacks

Abhishek Sonate, Dheeraj Vepuri, Sagil James

IMECE 2017; V002T02A011https://doi.org/10.1115/IMECE2017-72317

Abstract

View Articletitled, Study of Micro Ultrasonic Machining of CFRP/Ti Stacks

PDF

Topics: Carbon reinforced plastics , Ultrasonic machining , Composite materials , Machinery , Machining , Micromachining , Delamination , Stress , Titanium , Anisotropy

Applications of High Energy Laser Beams in Surface Processing and Machining

Minimizing the Heat Transfer Effect on a Laser Robotic End of Arm Tooling During Manufacturing Process

Abdallah Hamieh, Badih Jawad, Liping Liu, Vernon Fernandez

IMECE 2017; V002T02A012https://doi.org/10.1115/IMECE2017-70176

Abstract

View Articletitled, Minimizing the Heat Transfer Effect on a Laser Robotic End of Arm Tooling During Manufacturing Process

PDF

Topics: Heat transfer , Lasers , Manufacturing , Robotics , Tooling , Design , Wheels , Pressure , Energy dissipation , Heat

Uncertainty Quantification for Laser Ablation of Aluminum

Yeqing Wang, Getachew K. Befekadu, Crystal L. Pasiliao

IMECE 2017; V002T02A013https://doi.org/10.1115/IMECE2017-70625

Abstract

View Articletitled, Uncertainty Quantification for Laser Ablation of Aluminum

PDF

Topics: Aluminum , Laser ablation , Uncertainty quantification , Lasers , Uncertainty , Heat conduction , Ablation (Vaporization technology) , Approximation , Chaos , Computer simulation

Computational Modeling and Simulation for Advanced Manufacturing

Computational Three-Dimensional Microstructure Defect Distributions in Thermal Barrier Coatings

Stephanie A. Wimmer, Virginia G. DeGiorgi, Edward P. Gorzkowski, John Drazin

IMECE 2017; V002T02A014https://doi.org/10.1115/IMECE2017-70405

Abstract

View Articletitled, Computational Three-Dimensional Microstructure Defect Distributions in Thermal Barrier Coatings

PDF

Topics: Thermal barrier coatings , Mechanical properties , Bulk solids , Coating processes , Coatings , Electromagnetic scattering , Stress , Ceramic coatings , Ceramics , Displacement

Study on Chip Formation and Simulation of Cutting In-Situ TiB₂ Particle Reinforced 7050Al Metal Matrix Composites

Yifeng Xiong, Wenhu Wang, Ruisong Jiang, Kunyang Lin, Mingwei Shao

IMECE 2017; V002T02A015https://doi.org/10.1115/IMECE2017-71116

Abstract

View Articletitled, Study on Chip Formation and Simulation of Cutting In-Situ TiB<sub>2</sub> Particle Reinforced 7050Al Metal Matrix Composites

PDF

Topics: Cutting , Metal matrix composites , Particulate matter , Simulation , Finite element methods , Shear (Mechanics) , Composite materials , Deformation , Density , Fracture (Materials)

Impact Damage Prediction of Assembly Fiber-Reinforced Thermoplastic Polymer (AFRTP) Structures

Xudong Yang, Lingyu Sun, Lijun Li, Cheng Zhang

IMECE 2017; V002T02A016https://doi.org/10.1115/IMECE2017-71220

Abstract

View Articletitled, Impact Damage Prediction of Assembly Fiber-Reinforced Thermoplastic Polymer (AFRTP) Structures

PDF

Topics: Damage , Fibers , Manufacturing , Polymers , Mechanical properties , Stress , Failure mechanisms , Laminates , Metal stamping , Plates (structures)

Residual Stress Characterization From Numerical Analysis of the Multi-Particle Impact Behavior in Cold Spray

Kando Hamiyanze Moonga, Tien-Chien Jen

IMECE 2017; V002T02A017https://doi.org/10.1115/IMECE2017-71225

Abstract

View Articletitled, Residual Stress Characterization From Numerical Analysis of the Multi-Particle Impact Behavior in Cold Spray

PDF

Topics: Numerical analysis , Particulate matter , Sprays , Stress , Compressive stress , Deformation , Shot peening , Bonding , Coatings , Fatigue

A Simulative Study Into Injection Molding of Parts With Elastic Hinges by Applying Selective Heating

Krzysztof Mrozek, Przemysław Poszwa, Paweł Muszyński, Roman Staniek

IMECE 2017; V002T02A018https://doi.org/10.1115/IMECE2017-71237

Abstract

View Articletitled, A Simulative Study Into Injection Molding of Parts With Elastic Hinges by Applying Selective Heating

PDF

Topics: Heating , Hinges , Injection molding , Cavities , Polymers , Temperature , Cooling , Polymer chains , Cycles , Die cutting

Numerical Simulations of Thermal Transport in Random Porous Materials and Powder Systems Using the Smoothed Particle Hydrodynamics Method

Deepak Shah, Alexey N. Volkov

IMECE 2017; V002T02A019https://doi.org/10.1115/IMECE2017-72055

Abstract

View Articletitled, Numerical Simulations of Thermal Transport in Random Porous Materials and Powder Systems Using the Smoothed Particle Hydrodynamics Method

PDF

Topics: Computer simulation , Hydrodynamics , Particulate matter , Porous materials , Thermal conductivity , Electrical conductance , Contact resistance , Density , Numerical analysis , Particle size

Computational Simulation of Dynamic Recrystallization and Severe Deformation of AA7075 Alloy

José Luis Hernández-Rivera, Perla Julieta Cerda Vázquez, Jose de Jesús Cruz Rivera, Pedro de Jesús García Zugasti, Mitsuo Osvaldo Ramos Azpeitia

IMECE 2017; V002T02A020https://doi.org/10.1115/IMECE2017-72508

Abstract

View Articletitled, Computational Simulation of Dynamic Recrystallization and Severe Deformation of AA7075 Alloy

PDF

Topics: Alloys , Deformation , Recrystallization , Simulation , Finite element methods , Grain size , Computer software , Model validation , Optical microscopy , Peak load

Congress-Wide Symposium on Additive Manufacturing

3D Printing a Bio-Polymer Cap for the Articular Femoral Condyles: A Feasibility Study

Luke Olsen, Zhiyong Wang

IMECE 2017; V002T02A021https://doi.org/10.1115/IMECE2017-70346

Abstract

View Articletitled, 3D Printing a Bio-Polymer Cap for the Articular Femoral Condyles: A Feasibility Study

PDF

Topics: Additive manufacturing , Polymers , Cartilage , Deflection , Finite element analysis , Shear stress , Simulation , Stress , Biocompatibility , Materials properties

Optimization of Process Parameters Applied to a Prototype Selective Laser Sintering System

Abass Enzi, James A. Mynderse

IMECE 2017; V002T02A022https://doi.org/10.1115/IMECE2017-70591

Abstract

View Articletitled, Optimization of Process Parameters Applied to a Prototype Selective Laser Sintering System

PDF

Topics: Engineering prototypes , Lasers , Optimization , Sintering , Fracture (Materials) , Surface roughness , Response surface methodology , Additive manufacturing , Genetic algorithms , High power lasers

A Numerical Analysis Approach to Evaluate Hardness and Distortion for Selected Multi-Track Laser Cladding Configurations: P420 Steel Bead Deposition on Mild Steel

Navid Nazemi, Ruth Jill Urbanic

IMECE 2017; V002T02A023https://doi.org/10.1115/IMECE2017-70618

Abstract

View Articletitled, A Numerical Analysis Approach to Evaluate Hardness and Distortion for Selected Multi-Track Laser Cladding Configurations: P420 Steel Bead Deposition on Mild Steel

PDF

Topics: Cladding systems (Building) , Lasers , Numerical analysis , Steel , Heat , Additive manufacturing , Computer simulation , Errors , Fatigue life , Fracture (Materials)

Mechanical Behavior of As-Fabricated and UV-Cured Lattice Structures Printed Using the CLIP Technology

Anil Saigal, John R. Tumbleston, Hendric Vogel

IMECE 2017; V002T02A024https://doi.org/10.1115/IMECE2017-70886

Abstract

View Articletitled, Mechanical Behavior of As-Fabricated and UV-Cured Lattice Structures Printed Using the CLIP Technology

PDF

Topics: Mechanical behavior , Ultraviolet radiation , Stiffness , Additive manufacturing , Density , Stress , Struts (Engineering) , Compression , Flow (Dynamics) , Manufacturing

A Method to Determine Local Stress Fields in Microstructure Features Produced by Additive Manufacturing

Robert Saunders, Amit Bagchi, Ajit Achuthan

IMECE 2017; V002T02A025https://doi.org/10.1115/IMECE2017-71392

Abstract

View Articletitled, A Method to Determine Local Stress Fields in Microstructure Features Produced by Additive Manufacturing

PDF

Topics: Additive manufacturing , Stress , Finite element model , Constitutive equations , Grain boundaries , Grain size , Image segmentation , Mechanical behavior , Mechanical properties , Metals

Exploring Additive Manufacturing Processes for Direct 3D Printing of Copper Induction Coils

John D. Martin

IMECE 2017; V002T02A026https://doi.org/10.1115/IMECE2017-71685

Abstract

View Articletitled, Exploring Additive Manufacturing Processes for Direct 3D Printing of Copper Induction Coils

PDF

Topics: Additive manufacturing , Copper , Electromagnetic induction , Melting , Computer-aided engineering , Cathode ray oscilloscopes , Electron beams , Lasers , Computer software , Computer-aided design

Utilizing a Numerical Simulation to Model a Step Function Response for 420 Stainless Steel Powder Laser Cladding

Navid Nazemi, Ruth Jill Urbanic, Syed Saqib

IMECE 2017; V002T02A027https://doi.org/10.1115/IMECE2017-71687

Abstract

View Articletitled, Utilizing a Numerical Simulation to Model a Step Function Response for 420 Stainless Steel Powder Laser Cladding

PDF

Topics: Cladding systems (Building) , Computer simulation , Lasers , Stainless steel , Geometry , Simulation , Transients (Dynamics) , Heating , Optimization , Oscillations

A Preliminary Study on 3D Printed Smart Insoles With Stretchable Piezoresistive Sensors for Plantar Pressure Monitoring

Md Omar Faruk Emon, Jae-Won Choi

IMECE 2017; V002T02A028https://doi.org/10.1115/IMECE2017-71817

Abstract

View Articletitled, A Preliminary Study on 3D Printed Smart Insoles With Stretchable Piezoresistive Sensors for Plantar Pressure Monitoring

PDF

Topics: Additive manufacturing , Pressure , Sensors , Multi-walled carbon nanotubes , Electrodes , Insulation , Manufacturing , Molding , Open channels (Hydraulics) , Photopolymers

Modeling and Experimental Characterization of Viscoelastic 3D Printed Spring/Damper Systems

Heather L. Lai, Cuiyu Kuang, Jared Nelson

IMECE 2017; V002T02A029https://doi.org/10.1115/IMECE2017-71957

Abstract

View Articletitled, Modeling and Experimental Characterization of Viscoelastic 3D Printed Spring/Damper Systems

PDF

Topics: Additive manufacturing , Dampers , Experimental characterization , Modeling , Springs , Viscoelastic materials , Materials properties , Damping , Frequency response , Transients (Dynamics)

Additive Manufacturing Techniques for Soft Electroactive Polymer Hydrogels Using a Customized 3D Printer

Austen Thien, Kishore Pochiraju

IMECE 2017; V002T02A030https://doi.org/10.1115/IMECE2017-72007

Abstract

View Articletitled, Additive Manufacturing Techniques for Soft Electroactive Polymer Hydrogels Using a Customized 3D Printer

PDF

Topics: Additive manufacturing , Conducting polymers , Hydrogels , Testing , Displacement , Shear (Mechanics) , Actuators , Catalysts , Design , Engineering prototypes

3D Printed Composites With Continuous Carbon Fiber Reinforcements

Ali N. Sarvestani, Nekoda van de Werken, Pouria Khanbolouki, Mehran Tehrani

IMECE 2017; V002T02A031https://doi.org/10.1115/IMECE2017-72041

Abstract

View Articletitled, 3D Printed Composites With Continuous Carbon Fiber Reinforcements

PDF

Topics: Additive manufacturing , Carbon fibers , Composite materials , Polymers , Design , Failure mechanisms , Mechanical properties , Stiffness

Additive Manufacturing of Magnetically Loaded Polymer Composites: An Experimental Study for Process Development

Balakrishnan Nagarajan, Alejandro F. Eufracio Aguilera, Ahmed Qureshi, Pierre Mertiny

IMECE 2017; V002T02A032https://doi.org/10.1115/IMECE2017-72077

Abstract

View Articletitled, Additive Manufacturing of Magnetically Loaded Polymer Composites: An Experimental Study for Process Development

PDF

Topics: Additive manufacturing , Polymer composites , Drops , Particulate matter , Stability , Magnetic fields , Deformation , Finite element methods , Magnetic induction , Magnetic particles

Thermal Modeling of 304L Stainless Steel for Selective Laser Melting: Laser Power Input Evaluation

Diego Augusto de Moraes, Aleksander Czekanski

IMECE 2017; V002T02A033https://doi.org/10.1115/IMECE2017-72224

Abstract

View Articletitled, Thermal Modeling of 304L Stainless Steel for Selective Laser Melting: Laser Power Input Evaluation

PDF

Topics: Lasers , Melting , Modeling , Stainless steel , Temperature distribution , Aerospace industry , Alloys , Aviation , Biomedicine , Cross section (Physics)

Analysis and Numerical Simulation of the Mechanical Performance of FDM Samples With Variable Infill Values

Steffany N. Cerda-Avila, Hugo I. Medellín-Castillo, Dirk F. de Lange

IMECE 2017; V002T02A034https://doi.org/10.1115/IMECE2017-72226

Abstract

View Articletitled, Analysis and Numerical Simulation of the Mechanical Performance of FDM Samples With Variable Infill Values

PDF

Topics: Computer simulation , Equipment performance , Finite element methods , Mechanical properties , Computer-aided design , Design , Engineering simulation , Manufacturing , Shapes , Shells

Tolerance Control Using Subvoxel Gray-Scale DLP 3D Printing

Khaled Mostafa, A. J. Qureshi, Carlo Montemagno

IMECE 2017; V002T02A035https://doi.org/10.1115/IMECE2017-72232

Abstract

View Articletitled, Tolerance Control Using Subvoxel Gray-Scale DLP 3D Printing

PDF

Topics: Additive manufacturing , Dimensions , Ultraviolet radiation , Hardening (Curing) , Resolution (Optics) , Computer-aided design , Geometry , Manufacturing , Manufacturing technology , Printing

Innovative Product Design

Innovative Air Leakage Test Method for B-Cars

Erdem Altug, Ayşe Ece Yildizcelik, Burak Birinkulu

IMECE 2017; V002T02A036https://doi.org/10.1115/IMECE2017-70123

Abstract

View Articletitled, Innovative Air Leakage Test Method for B-Cars

PDF

Topics: Automobiles , Leakage , Noise (Sound) , Cooling , Doors , Dust , Heating , Imaging , Roads , Water

New Design Solution for Crankshaft

Basheer Saad Kadhum Al-Azirjawi

IMECE 2017; V002T02A037https://doi.org/10.1115/IMECE2017-70436

Abstract

View Articletitled, New Design Solution for Crankshaft

PDF

Topics: Bearings , Bending (Stress) , Design , Engineering prototypes , Friction , Internal combustion engines , Pistons , Pressure , Product design , Stress

Validation of a Methodology to Implement Lean Production in Textile and Clothing Industry

Laura Costa Maia, Anabela C. Alves, Celina P. Leão, Rubén Eira

IMECE 2017; V002T02A038https://doi.org/10.1115/IMECE2017-71464

Abstract

View Articletitled, Validation of a Methodology to Implement Lean Production in Textile and Clothing Industry

PDF

Topics: Textiles , Instrumentation , Sustainability

Development of an Innovative Coupling System for Industrial Vehicles: An AGV Oriented Approach

Davide Pereira, José Machado, João Pedro Mendonça

IMECE 2017; V002T02A039https://doi.org/10.1115/IMECE2017-71574

Abstract

View Articletitled, Development of an Innovative Coupling System for Industrial Vehicles: An AGV Oriented Approach

PDF

Topics: Automated guided vehicles , Vehicles , Rotation , Trajectories (Physics)

A Review of the State of Art in Heat Sealing of Multilayer Polymer Films

Jorge Enrique Uribe Juárez, Alejandro C. Ramírez-Reivich, Crisanto Mendoza Covarrubias, Ma. del Pilar Corona-Lira

IMECE 2017; V002T02A040https://doi.org/10.1115/IMECE2017-71644

Abstract

View Articletitled, A Review of the State of Art in Heat Sealing of Multilayer Polymer Films

PDF

Topics: Heat , Polymer films , Sealing (Process) , Pressure , Design , Temperature , Assembly lines , Electromagnetic induction , Polymers , Temperature gradient

Sensorial Experience Extensions in Learning Environments

Fernando Luís-Ferreira, João Sarraipa, Gary McManus

IMECE 2017; V002T02A041https://doi.org/10.1115/IMECE2017-71983

Abstract

View Articletitled, Sensorial Experience Extensions in Learning Environments

PDF

Topics: Additive manufacturing , Teaching , Virtual reality

A Framework to Bridge Teachers, Student’s Affective State, and Improve Academic Performance

Jorge Calado, Fernando Luís-Ferreira, Joao Sarraipa, Ricardo Jardim-Goncalves

IMECE 2017; V002T02A042https://doi.org/10.1115/IMECE2017-72000

Abstract

View Articletitled, A Framework to Bridge Teachers, Student’s Affective State, and Improve Academic Performance

PDF

Topics: Bridges (Structures) , Engineering teachers , Students , Computer software , Education , Machine learning , Ontologies , Sensors

Manufacturing Process Modeling and Optimization

Modeling the Drill Bit for Rotational Burying Steel Pipe for Ground Source Heat Exchanger

Takao Kakizaki, Akinori Saito, Masahito Oguma, Chiaki Kageyama

IMECE 2017; V002T02A043https://doi.org/10.1115/IMECE2017-70200

Abstract

View Articletitled, Modeling the Drill Bit for Rotational Burying Steel Pipe for Ground Source Heat Exchanger

PDF

Topics: Bits (Tools) , Heat exchangers , Modeling , Pipes , Steel , Blades , Design , Torque , Computer-aided design , Rotation

Critical Factors That Impact Consistency of Fit and Finish at the Rear Fascia Cutline of Vehicles

James Mansour, Badih A. Jawad, Sabah Abro, Liping Liu, Vernon Fernandez, Jeff Tibbenham

IMECE 2017; V002T02A044https://doi.org/10.1115/IMECE2017-70341

Abstract

View Articletitled, Critical Factors That Impact Consistency of Fit and Finish at the Rear Fascia Cutline of Vehicles

PDF

Topics: Finishes , Vehicles , Design , Engineers , Manufacturing , Noise (Sound) , Optimization , Regression models , Response surface methodology

Investigation of Optimizing Arrangement Forms for Combined Angular Contact Ball Bearings

Bin Fang, Jinhua Zhang, Jun Hong, Yongsheng Zhu, Xu Wang, Jiajia Gao

IMECE 2017; V002T02A045https://doi.org/10.1115/IMECE2017-70374

Abstract

View Articletitled, Investigation of Optimizing Arrangement Forms for Combined Angular Contact Ball Bearings

PDF

Topics: Ball bearings , Bearings , Stress , Fatigue life , Machinery , Stiffness

Effects of Velocity on Elastic Deformation in Ball Screw Drives and its Compensation

Fuhua Li, Tiemin Li, Yao Jiang, Fengchun Li

IMECE 2017; V002T02A046https://doi.org/10.1115/IMECE2017-70863

Abstract

View Articletitled, Effects of Velocity on Elastic Deformation in Ball Screw Drives and its Compensation

PDF

Topics: Deformation , Screws , Dynamic models , Dynamic modeling , Errors , Feedforward control , Machine tools , Servomechanisms , Simulation , Simulation results

Cyber Integrated Metrology, Learning and Evaluation System: An Approach Towards Smart Factories

Martin Helgoson, Pontus Westlin, Vahid Kalhori

IMECE 2017; V002T02A047https://doi.org/10.1115/IMECE2017-71336

Abstract

View Articletitled, Cyber Integrated Metrology, Learning and Evaluation System: An Approach Towards Smart Factories

PDF

Topics: Metrology , Manufacturing , Machining , Errors , Feedback , Machine learning , Machinery , Production planning , Quality control

Analysis of Meshing Characteristics of Pins and Pin Housing Integral Structure in Cycloidal Planetary Drive

Yukun Wang, Guanyi Liu, Hao Yu, He Mao, Kai He, Ruxu Du

IMECE 2017; V002T02A048https://doi.org/10.1115/IMECE2017-71351

Abstract

View Articletitled, Analysis of Meshing Characteristics of Pins and Pin Housing Integral Structure in Cycloidal Planetary Drive

PDF

Topics: Pins (Engineering) , Wheels , Manufacturing , Design , Sliding friction , Finite element methods , Friction , Robots , Rolling friction , Simulation results

Analytical Modelling of Friction Along Tool Chip Interface for Inconel 718

Abhishek Kumar, Basil Kuriachen, Surender Ontela

IMECE 2017; V002T02A049https://doi.org/10.1115/IMECE2017-71556

Abstract

View Articletitled, Analytical Modelling of Friction Along Tool Chip Interface for Inconel 718

PDF

Topics: Friction , Modeling , Shear (Mechanics) , Shear stress , Accounting , Aerospace industry , Cutting , Machining , Power stations , Stress

Implementation and Evaluation of Mixed Model Representation of Virtual Objects in a Haptic Based Virtual Assembly Platform

Germánico González Badillo, Hugo I. Medellín-Castillo, Víctor E. Espinoza López

IMECE 2017; V002T02A050https://doi.org/10.1115/IMECE2017-71717

Abstract

View Articletitled, Implementation and Evaluation of Mixed Model Representation of Virtual Objects in a Haptic Based Virtual Assembly Platform

PDF

Topics: Haptics , Virtual assembly , Manufacturing , Collisions (Physics) , Simulation , Engines , Physics , Algorithms , Force feedback , Gravity (Force)

Tacit Knowledge Elicitation Techniques Applied to Complex Manufacturing Processes

David A. Guerra-Zubiaga

IMECE 2017; V002T02A051https://doi.org/10.1115/IMECE2017-71897

Abstract

View Articletitled, Tacit Knowledge Elicitation Techniques Applied to Complex Manufacturing Processes

PDF

Topics: Manufacturing , Cycles , Motion , Robots

Energy and GHG Emissions Assessment in a Plastic Injection Process at Machine Component Level: A Case Study of ABS Plastic Part Produced in a Hybrid Injection Molding Machine

Javier Ávila, Vicente Borja, Marcelo López-Parra, Alejandro C. Ramírez-Reivich

IMECE 2017; V002T02A052https://doi.org/10.1115/IMECE2017-72283

Abstract

View Articletitled, Energy and GHG Emissions Assessment in a Plastic Injection Process at Machine Component Level: A Case Study of ABS Plastic Part Produced in a Hybrid Injection Molding Machine

PDF

Topics: Emissions , Injection molding machines , Machine components , Energy consumption , Energy assessment , Machinery , Cycles , Energy generation , Performance

An Internet-of-Things Based Framework for Collaborative Manufacturing

Rajesh Krishnamurthy, J. Cecil, Damith Perera

IMECE 2017; V002T02A053https://doi.org/10.1115/IMECE2017-72293

Abstract

View Articletitled, An Internet-of-Things Based Framework for Collaborative Manufacturing

PDF

Topics: Internet of things , Manufacturing , Concurrent engineering , Design , Electronics , Manufacturing systems , Cloud computing , Cyber-physical systems , Economics , Haptics

Mechanistic Cutting Force Prediction Model for Plunge Milling Considering Cutter Runout

Kejia Zhuang, Xiaohu Xu, Ruiqi Xiao, Dahu Zhu, Shunsheng Guo, Sijie Yan

IMECE 2017; V002T02A054https://doi.org/10.1115/IMECE2017-72558

Abstract

View Articletitled, Mechanistic Cutting Force Prediction Model for Plunge Milling Considering Cutter Runout

PDF

Topics: Cutting , Milling , Surface roughness , Aircraft , Geometry , Machinery , Machining , Metal cutting , Modeling

Optimization of Corrosion Behavior in Submerged Friction Stir Processed Magnesium AZ31B Alloy

Sankar Ramaiyan, Udayakumar Mani, Rathinasuriyan Chandran, Senthil Kumar Velukkudi Santhanam

IMECE 2017; V002T02A055https://doi.org/10.1115/IMECE2017-72559

Abstract

View Articletitled, Optimization of Corrosion Behavior in Submerged Friction Stir Processed Magnesium AZ31B Alloy

PDF

Topics: Alloys , Corrosion , Friction , Magnesium (Metal) , Optimization , Magnesium alloys , Microhardness

Vibration Analysis of High-Speed End Milling Operations Applied to Injection Mold Materials

Andris Logins, Toms Torims, Pedro Rosado Castellano, Santiago Gutiérrez, Rafael Torres

IMECE 2017; V002T02A056https://doi.org/10.1115/IMECE2017-72636

Abstract

View Articletitled, Vibration Analysis of High-Speed End Milling Operations Applied to Injection Mold Materials

PDF

Topics: Milling , Vibration analysis , Cutting , Manufacturing , Vibration , Machinery , Surface roughness , Computer software , Cutting tools , Finishes

Metal Forming: Novel and Hybrid Processes, Material Characterization, and Control

Anisotropic Behavior of Aluminum Alloy 2024-Graphene Composites at Varying Strain Rates

M. Anthony Xavior, Prashantha Kumar Hosamane, Jeyapandiarajan Paulchamy

IMECE 2017; V002T02A057https://doi.org/10.1115/IMECE2017-70087

Abstract

View Articletitled, Anisotropic Behavior of Aluminum Alloy 2024-Graphene Composites at Varying Strain Rates

PDF

Topics: Aluminum alloys , Anisotropy , Composite materials , Graphene , Ball milling , Multi-walled carbon nanotubes , Alloys , Density , Failure , Fracture (Materials)

Effect of Recast Layer on the Strength Properties of the Spark Electric Discharge Machined Aluminium Alloy Composites

Pazhani Ashwath, M. Anthony Xavior, Tushar Nigam, Anubhav Goel, Mohit Rathi

IMECE 2017; V002T02A058https://doi.org/10.1115/IMECE2017-70104

Abstract

View Articletitled, Effect of Recast Layer on the Strength Properties of the Spark Electric Discharge Machined Aluminium Alloy Composites

PDF

Topics: Aluminum alloys , Composite materials , Electric discharge , Machinery , Tensile strength , Testing , Density , Electrical discharge machining , Flat plates , Graphene

Multiscale Sheet Metal Hydroforming and Burst Pressure Estimates

William J. Emblom, Ayotunde Olayinka, Scott W. Wagner, Thomas C. Pesacreta, Muhammad A. Wahab

IMECE 2017; V002T02A059https://doi.org/10.1115/IMECE2017-70347

Abstract

View Articletitled, Multiscale Sheet Metal Hydroforming and Burst Pressure Estimates

PDF

Topics: Pressure , Sheet metal , Materials properties , Analytical methods , Deformation , Design , Finite element analysis , Finite element model , Manufacturing , Rupture

Analysis of Forming Limits in Biaxial and Dome Test

Chetan P. Nikhare

IMECE 2017; V002T02A060https://doi.org/10.1115/IMECE2017-70482

Abstract

View Articletitled, Analysis of Forming Limits in Biaxial and Dome Test

PDF

Topics: Domes (Structural elements) , Forming limit diagrams , Stress , Geometry , Machinery , Metal stamping , Metals , Shapes , Tension

Process Parameter Analysis of Higher D/T Ratio Tube Formed From Sheet Hydroforming

Duanyang Tian, Xuedao Shu, Yilun Wei, Yu Wang

IMECE 2017; V002T02A061https://doi.org/10.1115/IMECE2017-70510

Abstract

View Articletitled, Process Parameter Analysis of Higher D/T Ratio Tube Formed From Sheet Hydroforming

PDF

Topics: Aircraft engines , Alloys , Blanks , Design , Errors , Experimental design , Finite element analysis , Pressure , Regression analysis , Simulation

Springback Analysis in Bilayer Material Bending

Chetan P. Nikhare

IMECE 2017; V002T02A062https://doi.org/10.1115/IMECE2017-70549

Abstract

View Articletitled, Springback Analysis in Bilayer Material Bending

PDF

Topics: Air pollution , Aluminum , Blanks , Composite materials , Elasticity , Errors , Fracture (Materials) , Fracture (Process) , Fuel consumption , Gages

Feasibility of Past Vertical Forming Utilizing Single Point Incremental Sheet Forming

Tyler J. Grimm, Ihab Ragai, John T. Roth

IMECE 2017; V002T02A063https://doi.org/10.1115/IMECE2017-71069

Abstract

View Articletitled, Feasibility of Past Vertical Forming Utilizing Single Point Incremental Sheet Forming

PDF

Topics: Forming techniques , Rotation , Sheet materials , Tooling

A Numerical Study on the Redistribution of Residual Stress After Machining

Kunyang Lin, Wenhu Wang, Ruisong Jiang, Yifeng Xiong

IMECE 2017; V002T02A064https://doi.org/10.1115/IMECE2017-71199

Abstract

View Articletitled, A Numerical Study on the Redistribution of Residual Stress After Machining

PDF

Topics: Machining , Stress , Residual stresses , Computer software , Cutting , Finite element methods , Finite element model , Quenching (Metalworking)

Fabrication of Friction Stir Processed 6082-T6 Aluminum Alloy With Reinforced Powder

Kazeem O. Sanusi, Esther T. Akinlabi

IMECE 2017; V002T02A065https://doi.org/10.1115/IMECE2017-71305

Abstract

View Articletitled, Fabrication of Friction Stir Processed 6082-T6 Aluminum Alloy With Reinforced Powder

PDF

Topics: Aluminum alloys , Friction , Manufacturing , Composite materials , Titanium , Knudsen number , Metal matrix composites , Scanning electron microscopy , Stress , Surface properties

Trimming of Flat and Tubular Components by High Speed Impact Cutting (HSIC)

Dirk Landgrebe, Tom Barthel, Frank Schieck

IMECE 2017; V002T02A066https://doi.org/10.1115/IMECE2017-71362

Abstract

View Articletitled, Trimming of Flat and Tubular Components by High Speed Impact Cutting (HSIC)

PDF

Topics: Cutting , Die cutting , Shearing (Deformation) , Cycles , Lightweight construction , Steel , Adiabatic processes (Thermodynamics) , Aluminum , Automotive industry , Building materials

Global-Local Characterization and Numerical Modeling of TWB Laser Welded Joints

F. Nalli, P. Russo Spena, L. Cortese, D. Reiterer

IMECE 2017; V002T02A067https://doi.org/10.1115/IMECE2017-71506

Abstract

View Articletitled, Global-Local Characterization and Numerical Modeling of TWB Laser Welded Joints

PDF

Topics: Computer simulation , Lasers , Welded joints , Base metals , Displacement , Fracture (Materials) , Fracture (Process) , Blanks , Constitutive equations , Finite element model

An Empirical Stretch Bending Failure Criterion for AHSS

Hua-Chu Shih, Taylor Gambon

IMECE 2017; V002T02A068https://doi.org/10.1115/IMECE2017-71722

Abstract

View Articletitled, An Empirical Stretch Bending Failure Criterion for AHSS

PDF

Topics: Failure , Fracture (Materials) , Fracture (Process) , Tension , Computer simulation , Shear (Mechanics) , Shear stress , Strain gradient , Experimental analysis , Failure mechanisms

Effect of Temperature on the Evolved Microstructure During Laser Beam Forming of Sheet Steels

Stephen Akinlabi, Madindwa Mashinini, Esther Akinlabi

IMECE 2017; V002T02A069https://doi.org/10.1115/IMECE2017-72044

Abstract

View Articletitled, Effect of Temperature on the Evolved Microstructure During Laser Beam Forming of Sheet Steels

PDF

Topics: Laser beams , Steel sheet , Temperature , High temperature , Density , Heating and cooling , Deformation , Design , Ferrites (Magnetic materials) , Grain size

Numerical Analysis and Simulation (FEM) of a Double Deep Drawing Sink Height

Pedro de Jesús García Zugasti, Hugo Iván Medellín Castillo, Pablo Alberto Limon Leyva, Eder Hazael Govea Valladares, José Luis Hernández Rivera

IMECE 2017; V002T02A070https://doi.org/10.1115/IMECE2017-72088

Abstract

View Articletitled, Numerical Analysis and Simulation (FEM) of a Double Deep Drawing Sink Height

PDF

Topics: Finite element methods , Numerical analysis , Simulation , Computer software , Experimental methods , Failure , Sheet metal work , Simulation results , Steel

Investigations on Dimensional Accuracy of Stamped Tailor Welded Blanks Under Warm Forming Conditions

Vakada Venkata Naga Satya Suresh, Srinivasa Prakash Regalla

IMECE 2017; V002T02A071https://doi.org/10.1115/IMECE2017-72478

Abstract

View Articletitled, Investigations on Dimensional Accuracy of Stamped Tailor Welded Blanks Under Warm Forming Conditions

PDF

Topics: Blanks , Computer simulation , Metal stamping , Residual stresses , Sheet materials , Simulation results , Springs , Stainless steel , Steel , Stress concentration

Nanomanufacturing

Biosensor Based on Layer by Layer Deposited Phosphorene Nanoparticles for Liver Cancer Detection

Jungyoon Kim, Shota Sando, Tianhong Cui

IMECE 2017; V002T02A072https://doi.org/10.1115/IMECE2017-71022

Abstract

View Articletitled, Biosensor Based on Layer by Layer Deposited Phosphorene Nanoparticles for Liver Cancer Detection

PDF

Topics: Biosensors , Cancer , Liver , Nanoparticles , Energy gap , Transistors

Capillary Force Guided Nanomanufacturing of Composite Materials for Advanced Battery Applications

Cary L. Pint

IMECE 2017; V002T02A073https://doi.org/10.1115/IMECE2017-71738

Abstract

View Articletitled, Capillary Force Guided Nanomanufacturing of Composite Materials for Advanced Battery Applications

PDF

Topics: Batteries , Composite materials , Nanomanufacturing , Sulfur , Carbon nanotubes , Lithium , Nanoscale phenomena , Sodium , Carbon , Chemical potential

Organization and Compaction of Composite Filler Material Using Acoustic Focusing

Lauren A. Chai, Brian W. Anthony

IMECE 2017; V002T02A074https://doi.org/10.1115/IMECE2017-71952

Abstract

View Articletitled, Organization and Compaction of Composite Filler Material Using Acoustic Focusing

PDF

Topics: Acoustics , Compacting , Composite materials , Fillers (Materials) , Carbon , Nanofibers , Electrical resistance , Containers , Electrical resistivity , Mineral oil

Robotics and Automation

Tolerances and Uncertainty in Robotic Systems

F. Proctor, Marek Franaszek, J. Michaloski

IMECE 2017; V002T02A075https://doi.org/10.1115/IMECE2017-70404

Abstract

View Articletitled, Tolerances and Uncertainty in Robotic Systems

PDF

Topics: Robotics , Uncertainty , Robots , Optimization , Computer programming , Manufacturing , Software development , Calibration , Design , Inspection

Starting Base Position Optimization in Integrated Task Planning for Mobile Manipulators Painting Large Workpieces

Qiankun Yu, Guolei Wang, Tianyu Ren, Xiaotong Hua, Ken Chen

IMECE 2017; V002T02A076https://doi.org/10.1115/IMECE2017-70465

Abstract

View Articletitled, Starting Base Position Optimization in Integrated Task Planning for Mobile Manipulators Painting Large Workpieces

PDF

Topics: Manipulators , Optimization , Painting , Algorithms , End effectors , Kinematics , Vibration

A Method for Solving Rotational Velocity Fluctuation Problem of a 3-DOF Parallel Tool Head

Dong Wang, Jun Wu, Liping Wang, Hao Si

IMECE 2017; V002T02A077https://doi.org/10.1115/IMECE2017-70712

Abstract

View Articletitled, A Method for Solving Rotational Velocity Fluctuation Problem of a 3-DOF Parallel Tool Head

PDF

Topics: Degrees of freedom , Displacement , Kinematics , Machining , Manipulators , Optimization , Stability

Product Lifecycle Management Tools to Support Next Generation of Mechatronic Systems at Aerospace Industry

David A. Guerra-Zubiaga, Simon Briceno

IMECE 2017; V002T02A078https://doi.org/10.1115/IMECE2017-71118

Abstract

View Articletitled, Product Lifecycle Management Tools to Support Next Generation of Mechatronic Systems at Aerospace Industry

PDF

Topics: Aerospace industry , Life cycle management , Mechatronics , Design , Instrumentation , Manufacturing , Manufacturing tools , Robotics

Active Vibration Control for Robotic Machining

Zheng Wang, Patrick Keogh

IMECE 2017; V002T02A079https://doi.org/10.1115/IMECE2017-71670

Abstract

View Articletitled, Active Vibration Control for Robotic Machining

PDF

Topics: Machining , Robotics , Vibration control , Vibration , Robots , Accelerometers , Actuators , Chatter , Control equipment , Cutting

Second Symposium on Fastening and Joining Research and Advanced Technology

Modeling of Moisture Diffusion Effect on Peel and Sheer Stresses in Adhesively Bonded Single Lap Joints Under Shear-Tensile Loading

Emad Mazhari, Sayed A. Nassar

IMECE 2017; V002T02A080https://doi.org/10.1115/IMECE2017-70127

Abstract

View Articletitled, Modeling of Moisture Diffusion Effect on Peel and Sheer Stresses in Adhesively Bonded Single Lap Joints Under Shear-Tensile Loading

PDF

Topics: Diffusion (Physics) , Modeling , Shear (Mechanics) , Stress , Adhesives , Materials properties

FEM Stress Analysis and the Load Factor of Bolted Joints Consisting of Dissimilar Hollow Cylinders Under Tensile Loads

Shunichiro Sawa, Mitsutoshi Ishimura, Yasuhisa Sekiguchi, Toshiyuki Sawa

IMECE 2017; V002T02A081https://doi.org/10.1115/IMECE2017-70503

Abstract

View Articletitled, FEM Stress Analysis and the Load Factor of Bolted Joints Consisting of Dissimilar Hollow Cylinders Under Tensile Loads

PDF

Topics: Bolted joints , Cylinders , Finite element methods , Finite element model , Stress , Stress analysis (Engineering) , Steel , Aluminum , Design , Design methodology

Bolt Loosening Behavior of Bolted Joints Under Repeated Transverse Loads

Shunichiro Sawa, Mitsutoshi Ishimura, Toshiyuki Sawa, Takanori Nagao

IMECE 2017; V002T02A082https://doi.org/10.1115/IMECE2017-70515

Abstract

View Articletitled, Bolt Loosening Behavior of Bolted Joints Under Repeated Transverse Loads

PDF

Topics: Bolted joints , Stress , Cycles , Finite element methods , Finite element model , Surface roughness , Machinery , Bearings , Displacement , Rotation

Modeling, Simulation and Analysis of Weld-Induced Thermal Stresses in a Solid Round-on-Flat Plate Fillet Weld

Suhash Ghosh, Chittaranjan Sahay, Haider Al-Mamoury

IMECE 2017; V002T02A083https://doi.org/10.1115/IMECE2017-71074

Abstract

View Articletitled, Modeling, Simulation and Analysis of Weld-Induced Thermal Stresses in a Solid Round-on-Flat Plate Fillet Weld

PDF

Topics: Modeling , Simulation , Thermal stresses , Stress , Welding , Finite element model , Heat , Bricks , Heating and cooling , Model validation

Modeling and Analysis of Weld Geometries, Size and Gap on Weld-Induced Thermal Stresses in a Solid Round-on-Flat Plate Fillet Weld

Suhash Ghosh, Chittaranjan Sahay, Haider Al-Mamoury

IMECE 2017; V002T02A084https://doi.org/10.1115/IMECE2017-71079

Abstract

View Articletitled, Modeling and Analysis of Weld Geometries, Size and Gap on Weld-Induced Thermal Stresses in a Solid Round-on-Flat Plate Fillet Weld

PDF

Topics: Modeling , Thermal stresses , Finite element model , Geometry , Heat , Stress , Welding , Design , Heating and cooling , Shapes

Parametric Modeling and Optimization of CFRP/Steel Adhesive Structures

Wei Huang, Lingyu Sun, Yantao Chu, Cheng Zhang, Lijun Li

IMECE 2017; V002T02A085https://doi.org/10.1115/IMECE2017-71223

Abstract

View Articletitled, Parametric Modeling and Optimization of CFRP/Steel Adhesive Structures

PDF

Topics: Adhesives , Carbon reinforced plastics , Modeling , Optimization , Steel , Joining , Design , Adhesion , Aerospace industry , Aviation

Microhardness and Microstructural Studies on Underwater Friction Stir Welding of 5052 Aluminum Alloy

Srinivasa Rao Pedapati, Dhanis Paramaguru, Mokhtar Awang

IMECE 2017; V002T02A086https://doi.org/10.1115/IMECE2017-71248

Abstract

View Articletitled, Microhardness and Microstructural Studies on Underwater Friction Stir Welding of 5052 Aluminum Alloy

PDF

Topics: Aluminum alloys , Friction , Microhardness , Welding , Mechanical properties , Alloys , Aluminum , Welded joints

Process Parameter Optimization of Friction Crush Welding (FCW) of AISI 304 Stainless Steel

Gurinder Singh Brar, Manpreet Singh, Ajay Singh Jamwal

IMECE 2017; V002T02A087https://doi.org/10.1115/IMECE2017-71302

Abstract

View Articletitled, Process Parameter Optimization of Friction Crush Welding (FCW) of AISI 304 Stainless Steel

PDF

Topics: Friction , Optimization , Stainless steel , Welding , Steel , Bond strength , Disks , Engineering systems and industry applications , Experimental design , Food products

Friction Stir Welding of Aluminum 6061-T6 and Multi-Purpose Copper 11000 Alloy

Lewis N. Payton

IMECE 2017; V002T02A088https://doi.org/10.1115/IMECE2017-71411

Abstract

View Articletitled, Friction Stir Welding of Aluminum 6061-T6 and Multi-Purpose Copper 11000 Alloy

PDF

Topics: Alloys , Aluminum , Copper , Friction , Welding , Computer numerical control machine tools , Copper alloys , Tensile strength , Aluminum alloys , Aeronautics

Evaluation of 7050 Aluminum Plates Joined by Friction Stir Welding Using Acoustoelastic

Shirley Alexandra García Ruano, Felipe Bertelli, Auteliano Antunes dos Santos, Jr.

IMECE 2017; V002T02A089https://doi.org/10.1115/IMECE2017-71668

Abstract

View Articletitled, Evaluation of 7050 Aluminum Plates Joined by Friction Stir Welding Using Acoustoelastic

PDF

Topics: Aluminum plate , Friction , Welding , Alloys , Aluminum alloys , Residual stresses , Welded joints , Aerospace industry , Aircraft , Heat

Assessment of Dissimilar Weld Between Duplex Stainless Steel Grades for Severe Corrosive Applications

Venkatesan Paranthaman, K. Shanmuga Sundaram

IMECE 2017; V002T02A090https://doi.org/10.1115/IMECE2017-72569

Abstract

View Articletitled, Assessment of Dissimilar Weld Between Duplex Stainless Steel Grades for Severe Corrosive Applications

PDF

Topics: Stainless steel , Base metals , Corrosion , Diffusion (Physics) , Fracture toughness , Gas tungsten arc welding , Microhardness , Welding

Experimental Investigation on Solid State Resistance Spot Welding

Zhijun Wu, Guanlin Zhang, Bingxu Wang, Kelvin Shih

IMECE 2017; V002T02A091https://doi.org/10.1115/IMECE2017-72581

Abstract

View Articletitled, Experimental Investigation on Solid State Resistance Spot Welding

PDF

Topics: Welding , Automotive industry , Equipment performance , Joining , Metals , Microhardness , Sheet metal , Steel sheet

Multi-Axial Fatigue of Sheet Metal Joints Under Clamp Load and Cyclic Bending

Andrea Piccatto, Giovanni Belingardi, Zhijun Wu, Sayed A. Nassar

IMECE 2017; V002T02A092https://doi.org/10.1115/IMECE2017-72691

Abstract

View Articletitled, Multi-Axial Fatigue of Sheet Metal Joints Under Clamp Load and Cyclic Bending

PDF

Topics: Clamps (Tools) , Fatigue , Sheet metal , Stress , Bolted joints , Bearings , Bending (Stress) , Delays , Elongation , Fatigue life

Effect of Autoclave Heating and Cooling Rates on Adhesively Bonded Lightweight Material Joints

Sayed A. Nassar, Marcello Tardito, Giovanni Belingardi

IMECE 2017; V002T02A093https://doi.org/10.1115/IMECE2017-72692

Abstract

View Articletitled, Effect of Autoclave Heating and Cooling Rates on Adhesively Bonded Lightweight Material Joints

PDF

Topics: Heating and cooling , Adhesives , Aluminum , Bonding , Failure mechanisms , Heat , Heating , Magnesium (Metal) , Shear (Mechanics) , Stress

Sensing, Measurement, and Process Control

Remaining Tool Life Prediction Based on Force Sensors Signal During End Milling of Stavax ESR Steel

Mebrahitom Asmelash Gebremariam, Seow Xiang Yuan, Azmir Azhari, Tamiru Alemu Lemma

IMECE 2017; V002T02A094https://doi.org/10.1115/IMECE2017-70058

Abstract

View Articletitled, Remaining Tool Life Prediction Based on Force Sensors Signal During End Milling of Stavax ESR Steel

PDF

Topics: Force sensors , Milling , Signals , Steel , Machining , Artificial neural networks , Cutting , Dynamometers , Feature extraction , Service life (Equipment)

Measurement of Dynamic Performances of High-Speed Rotating Spindle by Non-Contact Electromagnetic Loading Device

Shaoke Wan, Jun Hong, Wenjun Su, Xiaohu Li, Yanhui Sun, Wei Chen

IMECE 2017; V002T02A095https://doi.org/10.1115/IMECE2017-70301

Abstract

View Articletitled, Measurement of Dynamic Performances of High-Speed Rotating Spindle by Non-Contact Electromagnetic Loading Device

PDF

Topics: Excitation , Pressure , Rotation , Stiffness , Temperature

Real-Time Correction of Nonlinearity Error in Homodyne Phase-Locking Interferometer

S. Lu, K. M. Yang, Y. Zhu, L. J. Wang, M. Zhang

IMECE 2017; V002T02A096https://doi.org/10.1115/IMECE2017-70914

Abstract

View Articletitled, Real-Time Correction of Nonlinearity Error in Homodyne Phase-Locking Interferometer

PDF

Topics: Errors , Interferometers , Nanoscale phenomena , Accuracy and precision , Algorithms , Diffraction gratings , Kalman filters , Lithography , Polarization (Electricity) , Polarization (Light)

Application of Order Statistics in the Evaluation of Flatness Error: Sampling Problem

Tomasz Bartkowiak, Roman Staniek

IMECE 2017; V002T02A097https://doi.org/10.1115/IMECE2017-71295

Abstract

View Articletitled, Application of Order Statistics in the Evaluation of Flatness Error: Sampling Problem

PDF

Topics: Errors , Statistics , Coordinate measuring machines , Manufacturing , Theorems (Mathematics) , Machine tools , Materials properties , Mechanical structures , Statistical distributions , Surface texture

Characterization of 3D Surface Texture Directionality Using Multi-Scale Curvature Tensor Analysis

Tomasz Bartkowiak

IMECE 2017; V002T02A098https://doi.org/10.1115/IMECE2017-71609

Abstract

View Articletitled, Characterization of 3D Surface Texture Directionality Using Multi-Scale Curvature Tensor Analysis

PDF

Topics: Surface texture , Tensors , Anisotropy , Fourier transforms , Isotropy , Microscopes , Probes , Steel , Texture (Materials) , Tribology

Variation Simulation and Design for Assembly

Geometrical Variation Simulation for Assembly With Form Defects

Edoh Goka, Lazhar Homri, Pierre Beaurepaire, Jean-Yves Dantan

IMECE 2017; V002T02A099https://doi.org/10.1115/IMECE2017-70118

Abstract

View Articletitled, Geometrical Variation Simulation for Assembly With Form Defects

PDF

Topics: Manufacturing , Simulation , Cylinders , Geometry , Probability , Tolerance analysis , Modeling , Optimization , Product quality , Shapes

Variation Simulation Considering Welding Distortion Applied in High-Speed Trains

Zhimin Li, Limin Yao, Baowang Li

IMECE 2017; V002T02A100https://doi.org/10.1115/IMECE2017-70387

Abstract

View Articletitled, Variation Simulation Considering Welding Distortion Applied in High-Speed Trains

PDF

Topics: Simulation , Trains , Welding , Manufacturing , Tolerance analysis , Finite element methods , Shrinkage (Materials) , Safety , Transportation systems

Inspection Data to Support a Digital Twin for Geometry Assurance

Kristina Wärmefjord, Rikard Söderberg, Lars Lindkvist, Björn Lindau, Johan S. Carlson

IMECE 2017; V002T02A101https://doi.org/10.1115/IMECE2017-70398

Abstract

View Articletitled, Inspection Data to Support a Digital Twin for Geometry Assurance

PDF

Topics: Geometry , Inspection , Manufacturing systems , Optimization , Design , Internet of things , Manufacturing , Real-time control , Shapes

Comparison of Different Sensitivity Analysis Methods in the Context of Dimensional Management

Björn Heling, Thomas Oberleiter, Benjamin Schleich, Kai Willner, Sandro Wartzack

IMECE 2017; V002T02A102https://doi.org/10.1115/IMECE2017-70550

Abstract

View Articletitled, Comparison of Different Sensitivity Analysis Methods in the Context of Dimensional Management

PDF

Topics: Sensitivity analysis , Tolerance analysis , Design , Electromagnetic scattering , Engineers , Inspection , Manufacturing , Mass production , Radiation scattering , Scattering (Physics)

Spatial Frequency Analysis for Improved Quality in Big Area Additive Manufacturing (BAAM)

Eric MacDonald, Edward Burden, Jason Walker, Jonathan Kelly, Brett Conner, Clark Patterson, Austin Schmidt, Andrew Bader

IMECE 2017; V002T02A103https://doi.org/10.1115/IMECE2017-70630

Abstract

View Articletitled, Spatial Frequency Analysis for Improved Quality in Big Area Additive Manufacturing (BAAM)

PDF

Topics: Additive manufacturing , Computers , Manufacturing , Photography , Fourier analysis , Algorithms , Damage , Delamination , Hardware , Manufacturing systems

Contact Variation Optimization for Surface-to-Surface Contacts

Soner Camuz, Magnus Bengtsson, Rikard Söderberg, Kristina Wärmefjord

IMECE 2017; V002T02A104https://doi.org/10.1115/IMECE2017-70877

Abstract

View Articletitled, Contact Variation Optimization for Surface-to-Surface Contacts

PDF

Topics: Computer software , Degrees of freedom , Fasteners , Finite element analysis , Machining , Manufacturing , Optimization , Reliability , Stability , Stress

Convexity and Optimality Conditions for Constrained Least-Squares Fitting of Planes and Parallel Planes to Establish Datums

Craig M. Shakarji, Vijay Srinivasan

IMECE 2017; V002T02A105https://doi.org/10.1115/IMECE2017-70899

Abstract

View Articletitled, Convexity and Optimality Conditions for Constrained Least-Squares Fitting of Planes and Parallel Planes to Establish Datums

PDF

Topics: Fittings , Algorithms , Design , Manufacturing

Integrated Tolerancing and Motion Error Analysis of Suspension Assembly Considering Local Deformation in Suspension Shock Tower

Hua Wang, Mingshu Li, Liang Zhao

IMECE 2017; V002T02A106https://doi.org/10.1115/IMECE2017-71130

Abstract

View Articletitled, Integrated Tolerancing and Motion Error Analysis of Suspension Assembly Considering Local Deformation in Suspension Shock Tower

PDF

Topics: Deformation , Error analysis , Manufacturing , Shock (Mechanics) , Compression , Joining , Springs , Automotive industry , Computer software , Computer-aided engineering

Variation Analysis of Accumulative Stresses in Multistep Assembly Processes Using Output Transformation Matrices

Jia Lin, Sun Jin, Cheng Zheng, Fuyong Yang, Siyi Ding

IMECE 2017; V002T02A107https://doi.org/10.1115/IMECE2017-71215

Abstract

View Articletitled, Variation Analysis of Accumulative Stresses in Multistep Assembly Processes Using Output Transformation Matrices

PDF

Topics: Manufacturing , Stress , Modeling , Computer-aided design , Condensation , Finite element analysis , Reliability

Automotive Premium Quality Improvement by High-End-Visualization

Serena Striegel, Benjamin Schleich, Daniel Zielinski, Sandro Wartzack

IMECE 2017; V002T02A108https://doi.org/10.1115/IMECE2017-71218

Abstract

View Articletitled, Automotive Premium Quality Improvement by High-End-Visualization

PDF

Topics: Visualization , Automotive industry , Automobiles , Cycles , Engineering prototypes , Engineering simulation , Fracture toughness , Simulation

Minimizing Weld Variation Effects Using Permutation Genetic Algorithms and Virtual Locator Trimming

Anders Forslund, Samuel Lorin, Lars Lindkvist, Kristina Wärmefjord, Rikard Söderberg

IMECE 2017; V002T02A109https://doi.org/10.1115/IMECE2017-71310

Abstract

View Articletitled, Minimizing Weld Variation Effects Using Permutation Genetic Algorithms and Virtual Locator Trimming

PDF

Topics: Genetic algorithms , Manufacturing , Fatigue life , Optimization , Simulation , Design , Engines , Fixturing , Mass production , Residual stresses

Data Flow and Communication Framework Supporting Digital Twin for Geometry Assurance

Robert Bohlin, Jonas Hagmar, Kristofer Bengtsson, Lars Lindkvist, Johan S. Carlson, Rikard Söderberg

IMECE 2017; V002T02A110https://doi.org/10.1115/IMECE2017-71405

Abstract

View Articletitled, Data Flow and Communication Framework Supporting Digital Twin for Geometry Assurance

PDF

Topics: Flow (Dynamics) , Geometry , Manufacturing , Computers , Control theory , Machine learning , Manufacturing systems , Mass production , Optimization , Optimization algorithms