Topics: Laser hardening , Modeling , Phase transitions , Steel , Cooling , Temperature , Heating , Thermal analysis , Accounting , Ferrites (Magnetic materials)

Comparison Between the Numerical and Experimental Deposition Patterns for an Electrostatic Rotary Bell Sprayer

Husam Osman, Kazimierz Adamiak, G. S. Peter Castle, Hua-Tzu (Charles) Fan, Joseph Simmer

IMECE 2015; V02BT02A003doi:https://doi.org/10.1115/IMECE2015-50211

Abstract

View Articletitled, Comparison Between the Numerical and Experimental Deposition Patterns for an Electrostatic Rotary Bell Sprayer

PDF

Topics: Computer simulation , Computer software , Flow (Dynamics) , Particulate matter

Study on the Effect of Clamping Sequence on Bulk Stress Redistribution of Long Edge

Hua Wang, Jun Liu

IMECE 2015; V02BT02A004doi:https://doi.org/10.1115/IMECE2015-50272

Abstract

View Articletitled, Study on the Effect of Clamping Sequence on Bulk Stress Redistribution of Long Edge

PDF

Topics: Stress , Computer simulation , Deformation , Manufacturing , Residual stresses , Aircraft , Errors , Finite element model , Friction , Quenching (Metalworking)

Tolerance Simulation of Thin-Walled C-Section Composite Beam in Wingbox Assembly Under Preloading

Hua Wang, Jun Liu

IMECE 2015; V02BT02A005doi:https://doi.org/10.1115/IMECE2015-50273

Abstract

View Articletitled, Tolerance Simulation of Thin-Walled C-Section Composite Beam in Wingbox Assembly Under Preloading

PDF

Topics: Composite building materials , Manufacturing , Simulation , Statistical distributions , Composite materials , Springs , Aircraft , Computer software , Finite element analysis , Gaussian distribution

Thermo Mechanical Analysis of Ultrasonic Welding of Metal Joints Under Different Control Parameters

Dalong Yi, Hui Zhang, Lili Zheng

IMECE 2015; V02BT02A006doi:https://doi.org/10.1115/IMECE2015-50401

Abstract

View Articletitled, Thermo Mechanical Analysis of Ultrasonic Welding of Metal Joints Under Different Control Parameters

PDF

Topics: Metals , Thermomechanics , Ultrasonic welding , Deformation , Temperature , Aluminum alloys , Atoms , Bonding , Diffusion (Physics) , Finite element model

Geometrical Effects of an Entrapped Bubble on Pore Shape in Solid

S. Y. Hsiao, P. S. Wei

IMECE 2015; V02BT02A007doi:https://doi.org/10.1115/IMECE2015-50490

Abstract

View Articletitled, Geometrical Effects of an Entrapped Bubble on Pore Shape in Solid

PDF

Topics: Bubbles , Shapes , Solidification , Accounting , Biology , Climate change , Food engineering , Geophysics , Momentum

NDT Applied to the Detection of Defects in Oil and Gas Pipes: A Simulation-Based Study

Wissam M. Alobaidi, Hussain M. Al-Rizzo, Eric Sandgren

IMECE 2015; V02BT02A008doi:https://doi.org/10.1115/IMECE2015-50641

Abstract

View Articletitled, NDT Applied to the Detection of Defects in Oil and Gas Pipes: A Simulation-Based Study

PDF

Topics: Pipes , Simulation , Pressurized water reactors , Microwaves , Resonance , Computer simulation , Computer software , Manufacturing , Nondestructive evaluation , Wall thickness

Electro-Thermal Modelling for Material Removal Study in Electric Discharge Machining Process

Yash Pachaury, Puneet Tandon

IMECE 2015; V02BT02A009doi:https://doi.org/10.1115/IMECE2015-50860

Abstract

View Articletitled, Electro-Thermal Modelling for Material Removal Study in Electric Discharge Machining Process

PDF

Topics: Electrical discharge machining , Modeling , Plasmas (Ionized gases) , Computer simulation , Electrodes , Finite element analysis , Heat , Heat conduction , Heat flux , Melting

Retracted: “Using Meta-Models as Fast and Accurate Predictors of a Reconfigurable Mould System” [ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 2B: Advanced Manufacturing, Houston, Texas, USA, November 13–19, 2015, Conference Sponsors: ASME, ISBN: 978-0-7918-5736-6, Copyright © 2015 by ASME. Paper No. IMECE2015-50990, pp. V02BT02A010; 10 pages; doi:10.1115/IMECE2015-50990]

ASME

IMECE 2015; V02BT02A010doi:https://doi.org/10.1115/IMECE2015-50990

Abstract

View Articletitled, Retracted: “Using Meta-Models as Fast and Accurate Predictors of a Reconfigurable Mould System” [ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 2B: Advanced Manufacturing, Houston, Texas, USA, November 13–19, 2015, Conference Sponsors: ASME, ISBN: 978-0-7918-5736-6, Copyright © 2015 by ASME. Paper No. IMECE2015-50990, pp. V02BT02A010; 10 pages; doi:10.1115/IMECE2015-50990]

PDF

Topics: Manufacturing , Mechanical engineering

Challenges Moving From Physical Into Virtual Verification of Sheet Metal Assemblies

Björn Lindau, Mikael Rosenqvist, Lars Lindkvist, Rikard Söderberg

IMECE 2015; V02BT02A011doi:https://doi.org/10.1115/IMECE2015-51024

Abstract

View Articletitled, Challenges Moving From Physical Into Virtual Verification of Sheet Metal Assemblies

PDF

Topics: Sheet metal , Computer-aided engineering , Design , Innovation , Manufacturing

CFD Multiphase Flow Modelling of Air Porosity Defect Formation During High-Pressure Die-Casting Filling Process

J. Hao, Y. J. Lin, Y. Nie

IMECE 2015; V02BT02A012doi:https://doi.org/10.1115/IMECE2015-51051

Abstract

View Articletitled, CFD Multiphase Flow Modelling of Air Porosity Defect Formation During High-Pressure Die-Casting Filling Process

PDF

Topics: Computational fluid dynamics , Die casting (Process) , Die castings (Product) , High pressure (Physics) , Modeling , Multiphase flow , Porosity , Computer simulation , Liquid metals , Bubbles

Initial Fracture Behavior of Intra CF/GF Woven Fabric Composites

Zhilan Xu, Daiki Ichikawa, Yuqiu Yang

IMECE 2015; V02BT02A013doi:https://doi.org/10.1115/IMECE2015-51267

Abstract

View Articletitled, Initial Fracture Behavior of Intra CF/GF Woven Fabric Composites

PDF

Topics: Composite materials , Fracture (Materials) , Fracture (Process) , Textiles , Finite element analysis , Resins , Carbon , Computer software , Damage , Ester

Stability Prediction of Milling Process With Closed Machining System Dynamics With Flexible Thin-Walled Workpiece

Chao Xu, Pingfa Feng, Dingwen Yu, Zhijun Wu, Jianfu Zhang

IMECE 2015; V02BT02A014doi:https://doi.org/10.1115/IMECE2015-51454

Abstract

View Articletitled, Stability Prediction of Milling Process With Closed Machining System Dynamics With Flexible Thin-Walled Workpiece

PDF

Topics: Machining , Milling , Stability , System dynamics , Dynamics (Mechanics) , Chatter , Cutting , Modeling , Machine tools , Optimization

Fuzzy Rule Based Modeling for Surface Roughness in Machining of Titanium Alloy Using Nano Coated Carbide Inserts

J. Nithyanandam, K. Palanikumar, Sushil Lal Das

IMECE 2015; V02BT02A015doi:https://doi.org/10.1115/IMECE2015-51458

Abstract

View Articletitled, Fuzzy Rule Based Modeling for Surface Roughness in Machining of Titanium Alloy Using Nano Coated Carbide Inserts

PDF

Topics: Machining , Modeling , Surface roughness , Titanium alloys , Carbide cutting tools , Cutting , Fuzzy logic , Titanium , Adhesion , Aerospace industry

Grinding Wheel Surface Topography for Multiple Pass With Incremental Depth of Cut of Rotary Diamond Dresser

M. A. K. Chowdhury

IMECE 2015; V02BT02A016doi:https://doi.org/10.1115/IMECE2015-53342

Abstract

View Articletitled, Grinding Wheel Surface Topography for Multiple Pass With Incremental Depth of Cut of Rotary Diamond Dresser

PDF

Topics: Diamonds , Grinding wheels , Grinding , Simulation , Cutting , Cutting tools , Manufacturing , Precision engineering

Investigation of the Relation Between Tube Spacing and Tube Sheet Deformation in Heat Exchangers due to the Mechanical Rolling Process: A Numerical Study

Søren Bøgelund Madsen, Claus Hessler Ibsen, Bo Gervang, Anders Schmidt Kristensen

IMECE 2015; V02BT02A017doi:https://doi.org/10.1115/IMECE2015-53636

Abstract

View Articletitled, Investigation of the Relation Between Tube Spacing and Tube Sheet Deformation in Heat Exchangers due to the Mechanical Rolling Process: A Numerical Study

PDF

Topics: Deformation , Heat exchangers , Design , Finite element analysis , Hardening , Heat transfer coefficients , Manufacturing , Martensitic steel , Plane strain , Pressure

Innovative Product Design

A Methodology for Optimal Lightweight Design of Moulds and Dies: A Case Study

Yi Nie, Yueh-Jaw Lin, Wei Sun, Tao Huang

IMECE 2015; V02BT02A018doi:https://doi.org/10.1115/IMECE2015-51039

Abstract

View Articletitled, A Methodology for Optimal Lightweight Design of Moulds and Dies: A Case Study

PDF

Topics: Design , Design methodology , Extruding , Manufacturing , Compressive strength , Computer simulation , Flow (Dynamics) , Life cycle assessment , Machine components , Machining

A Semantic Enrichment Approach Based on the Vector Space Model Supporting Collaboration in the Manufacturing Domain

Paulo Figueiras, Raquel Melo, Ruben Costa, Carlos Agostinho, Celson Lima, Ricardo Jardim-Goncalves

IMECE 2015; V02BT02A019doi:https://doi.org/10.1115/IMECE2015-51042

Abstract

View Articletitled, A Semantic Enrichment Approach Based on the Vector Space Model Supporting Collaboration in the Manufacturing Domain

PDF

Topics: Collaboration , Manufacturing , Manufacturing industry , Construction , Education , Information retrieval , Knowledge management

A Protective Safety Footwear Device Simulation and Design: An Innovative and Healthy Hybrid Component

Joel Vieira da Silva, Sergio L. Costa, Maria José Abreu, Joao P. Mendonca

IMECE 2015; V02BT02A020doi:https://doi.org/10.1115/IMECE2015-51056

Abstract

View Articletitled, A Protective Safety Footwear Device Simulation and Design: An Innovative and Healthy Hybrid Component

PDF

Topics: Design , Safety , Simulation , Accidents , Wounds

Motorcycle Swing Arm Development and Refinement Using Response Optimization

Michael Sapanaro, Suhash Ghosh, Chittaranjan Sahay

IMECE 2015; V02BT02A021doi:https://doi.org/10.1115/IMECE2015-51670

Abstract

View Articletitled, Motorcycle Swing Arm Development and Refinement Using Response Optimization

PDF

Topics: Motorcycles , Optimization , Design , Composite materials , Finite element analysis , Geometry , Response surface methodology , Boundary-value problems , Computer software , Deflection

CAD Information Handling for Obtaining Dependable Manufacturing Systems

E. Miron, J. P. Mendonca, J. Machado, D. Olaru, G. Prisacaru

IMECE 2015; V02BT02A022doi:https://doi.org/10.1115/IMECE2015-51712

Abstract

View Articletitled, CAD Information Handling for Obtaining Dependable Manufacturing Systems

PDF

Topics: Computer-aided design , Manufacturing systems , Design , Computer software , Formal verification , Internet , Control equipment , Errors , Failure , Safety

Centrifugal Power Transmission Apparatus Design, Development, and Optimization

Abel Ardis, Bahram Asiabanpour, Nicholas Hawkes, Mohammed Khodabakhsh, Steven Mathis

IMECE 2015; V02BT02A023doi:https://doi.org/10.1115/IMECE2015-51976

Abstract

View Articletitled, Centrifugal Power Transmission Apparatus Design, Development, and Optimization

PDF

Topics: Design , Optimization , Drilling , Electronic systems , Energy dissipation

Semantic Alignment for Interoperable Manufacturing Networks Establishment

Fabio Branco, Elsa Marcelino-Jesus, Joao Sarraipa, Elisabeth Ilie-Zudor, Ricardo Jardim-Goncalves

IMECE 2015; V02BT02A024doi:https://doi.org/10.1115/IMECE2015-52084

Abstract

View Articletitled, Semantic Alignment for Interoperable Manufacturing Networks Establishment

PDF

Topics: Computer software , Manufacturing , Transparency , User interfaces

A Knowledge-Based Approach for Supporting Aquaculture Data Analysis Proficiency

Pedro Oliveira, Ruben Costa, Jose Lima, Fernando Ferreira, Joao Sarraipa

IMECE 2015; V02BT02A025doi:https://doi.org/10.1115/IMECE2015-52183

Abstract

View Articletitled, A Knowledge-Based Approach for Supporting Aquaculture Data Analysis Proficiency

PDF

Topics: Cloud computing , Data mining , Instrumentation , Profitability , Sustainability

Design of a Conceptual Bed Mattress for Reducing Pressure on Bony Prominences

Ozlem Salman, Karolina Bezerra, José Machado, Vitor Carvalho, Filomena Soares, Celina P. Leão

IMECE 2015; V02BT02A026doi:https://doi.org/10.1115/IMECE2015-52201

Abstract

View Articletitled, Design of a Conceptual Bed Mattress for Reducing Pressure on Bony Prominences

PDF

Topics: Design , Pressure , Health care , Integrated systems , Safety

Osmosis Process Development for Innovative Product Design and Validation

Carlos Agostinho, Catarina Marques-Lucena, Michele Sesana, Artur Felic, Klaus Fischer, Cinzia Rubattino, João Sarraipa

IMECE 2015; V02BT02A027doi:https://doi.org/10.1115/IMECE2015-52238

Abstract

View Articletitled, Osmosis Process Development for Innovative Product Design and Validation

PDF

Topics: Osmosis , Product design , Design , Manufacturing , Camshafts , Engines , Product development , Visualization

Development and Optimization of a Paper Punching System

João Sousa, Tiago Pinho, Luís Figueiredo, João Mendonça, José Machado

IMECE 2015; V02BT02A028doi:https://doi.org/10.1115/IMECE2015-52371

Abstract

View Articletitled, Development and Optimization of a Paper Punching System

PDF

Topics: Optimization , Punching (Metalworking) , Bindery equipment , Computer simulation , Geometry , Mechanical properties , Torque , Torque measurement

Negotiation in Collaborative Working Environment for the Next Generation of Product Design

Carlos Coutinho, Adina Cretan, Carlos Agostinho, Ricardo Jardim-Goncalves

IMECE 2015; V02BT02A029doi:https://doi.org/10.1115/IMECE2015-52378

Abstract

View Articletitled, Negotiation in Collaborative Working Environment for the Next Generation of Product Design

PDF

Topics: Negotiation , Product design , Columns (Structural) , Innovation , Manufacturing

Design of Robust Mechatronics Embedded Systems by Integration of Virtual Simulation and Mechatronics Platform

Devdas Shetty, Naresh Poudel, Esther Ososanya

IMECE 2015; V02BT02A030doi:https://doi.org/10.1115/IMECE2015-52784

Abstract

View Articletitled, Design of Robust Mechatronics Embedded Systems by Integration of Virtual Simulation and Mechatronics Platform

PDF

Topics: Design , Embedded systems , Mechatronics , Simulation , Optimization , Dampers , Springs , Complex systems , Computer software , Machine tools

Joining Technologies for Advanced Materials and Structures

Numerical Analysis of Effect of Cohesive Parameters on Mixed-Mode Failure of Double-Scarf Adhesive Joint Subjected to Uniaxial Tensile Loadings

Lijuan Liao, Chenguang Huang

IMECE 2015; V02BT02A031doi:https://doi.org/10.1115/IMECE2015-50118

Abstract

View Articletitled, Numerical Analysis of Effect of Cohesive Parameters on Mixed-Mode Failure of Double-Scarf Adhesive Joint Subjected to Uniaxial Tensile Loadings

PDF

Topics: Adhesive joints , Failure , Numerical analysis , Adhesives , Fracture (Materials) , Brittleness , Damage , Finite element methods , Anisotropy , Dimensional analysis

Multi Response Optimization of Submerged Friction Stir Welding Process Parameters Using TOPSIS Approach

Senthil Kumar Velukkudi Santhanam, Lokesh Rathinaraj, Rathinasuriyan Chandran, Shankar Ramaiyan

IMECE 2015; V02BT02A032doi:https://doi.org/10.1115/IMECE2015-50353

Abstract

View Articletitled, Multi Response Optimization of Submerged Friction Stir Welding Process Parameters Using TOPSIS Approach

PDF

Topics: Friction , Optimization , Welding , Alloys , Aircraft , Aluminum alloys , Decision making , Elongation , Mechanical properties , Preferences

Avoiding of Self-Loosening in Components With Multiple Screw Joints

D. Guggolz, S. K. Manoharan, C. Friedrich

IMECE 2015; V02BT02A033doi:https://doi.org/10.1115/IMECE2015-50369

Abstract

View Articletitled, Avoiding of Self-Loosening in Components With Multiple Screw Joints

PDF

Topics: Screws , Simulation , Stress , Rotation , Safety , Boundary-value problems , Damage , Design , Failure , Modeling

Thermal Analysis of Friction Stir Welding Process Under Different Control and Energy Parameters

Dalong Yi, Hui Zhang

IMECE 2015; V02BT02A034doi:https://doi.org/10.1115/IMECE2015-50451

Abstract

View Articletitled, Thermal Analysis of Friction Stir Welding Process Under Different Control and Energy Parameters

PDF

Topics: Friction , Thermal analysis , Welding , Heat transfer , Temperature distribution , Aluminum alloys , Computer simulation , Deformation , Energy efficiency , Energy generation

Improved Mechanical Preload Measurement of Bolted Joints for Light Weight Design With CFRP Components

M. Jenne, H. Hubbertz, C. Friedrich, C. Bär

IMECE 2015; V02BT02A035doi:https://doi.org/10.1115/IMECE2015-50538

Abstract

View Articletitled, Improved Mechanical Preload Measurement of Bolted Joints for Light Weight Design With CFRP Components

PDF

Topics: Bolted joints , Carbon reinforced plastics , Design , Weight (Mass) , Gages , Automotive industry , Errors , Fiber reinforced plastics

3-D FEM Stress Analysis and Mechanical Characteristics in Bolted Joints Under External Tensile Loadings

Shunichiro Sawa, Mitsutoshi Ishimura, Yasuhisa Sekiguchi, Toshiyuki Sawa

IMECE 2015; V02BT02A036doi:https://doi.org/10.1115/IMECE2015-50572

Abstract

View Articletitled, 3-D FEM Stress Analysis and Mechanical Characteristics in Bolted Joints Under External Tensile Loadings

PDF

Topics: Bolted joints , Finite element methods , Mechanical properties , Stress analysis (Engineering) , Screw threads , Stress , Deformation , Design , Fatigue , Rupture

FEM Stress Analysis and Design for Bolted Circular Flange Joints Under Tensile Loading

Shunichiro Sawa, Mitsutoshi Ishimura, Yasuhisa Sekiguchi, Toshiyuki Sawa

IMECE 2015; V02BT02A037doi:https://doi.org/10.1115/IMECE2015-50576

Abstract

View Articletitled, FEM Stress Analysis and Design for Bolted Circular Flange Joints Under Tensile Loading

PDF

Topics: Design , Finite element methods , Flanges , Stress analysis (Engineering) , Stress , Bolted joints , Separation (Technology) , Cylinders , Design methodology , Elastic constants

Advantage of Elliptical Confidence Limit Method for Bolted Joint Tightening Reliability

Soichi Hareyama, Ken-ichi Manabe

IMECE 2015; V02BT02A038doi:https://doi.org/10.1115/IMECE2015-50729

Abstract

View Articletitled, Advantage of Elliptical Confidence Limit Method for Bolted Joint Tightening Reliability

PDF

Topics: Bolted joints , Reliability , Design , Torque , Stress , Tension , Process control , Yield point , Assembly lines , Dry friction

Recent Developments in Steel Friction Stir Welding: Project HILDA

Athanasios I. Toumpis, Alexander M. Galloway, Duncan Camilleri, Larbi Arbaoui

IMECE 2015; V02BT02A039doi:https://doi.org/10.1115/IMECE2015-51349

Abstract

View Articletitled, Recent Developments in Steel Friction Stir Welding: Project HILDA

PDF

Topics: Friction , Steel , Welding , Alloy steel , Computer simulation , Fatigue , Fatigue properties , Fracture toughness , Grain size , Heat

Modeling of Fracture Behaviours of Ultrasonically Welded Cu-Cu Joints Under Different Loading Conditions

Liang Xi, Mihaela Banu, S. Jack Hu, Wayne Cai, Teresa Rinker

IMECE 2015; V02BT02A040doi:https://doi.org/10.1115/IMECE2015-53407

Abstract

View Articletitled, Modeling of Fracture Behaviours of Ultrasonically Welded Cu-Cu Joints Under Different Loading Conditions

PDF

Topics: Fracture (Materials) , Fracture (Process) , Modeling , Copper , Batteries , Failure , Aluminum , Electric vehicles , Electrodes , Failure mechanisms

Manufacturing Processes in Composite Materials

Analysis of Tool Wear and Hole Quality During Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) / Titanium Alloy (Ti6Al4V) Stacks

Aishah Najiah Dahnel, Helen Ascroft, Stuart Barnes, Maximilian Gloger

IMECE 2015; V02BT02A041doi:https://doi.org/10.1115/IMECE2015-50416

Abstract

View Articletitled, Analysis of Tool Wear and Hole Quality During Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) / Titanium Alloy (Ti6Al4V) Stacks

PDF

Topics: Carbon fibers , Composite materials , Drilling , Hole quality , Titanium alloys , Wear , Titanium , Cutting , Delamination , Drills (Tools)

Study of Cutting Forces and Surface Roughness in Milling of Carbon Fibre Composite (CFC) With Conventional and and Pressurized CO₂ Cutting Fluids

Aishah Najiah Dahnel, Christopher Kibbler, Stuart Barnes, Helen Ascroft

IMECE 2015; V02BT02A042doi:https://doi.org/10.1115/IMECE2015-50419

Abstract

View Articletitled, Study of Cutting Forces and Surface Roughness in Milling of Carbon Fibre Composite (CFC) With Conventional and and Pressurized CO<sub>2</sub> Cutting Fluids

PDF

Topics: Carbon dioxide , Carbon fibers , Composite materials , Cutting , Fluids , Milling , Surface roughness , Temperature , Cooling , Machining

Nanomanufacturing: Novel Processes, Applications, and Process-Property Relationships

Shrinking Graphene Nanopore Using Electron-Beam-Induced Deposition for Single Molecule Detection

Jian Ma, Weiwei Zhao, Lei Liu, Jingjie Sha, Yunfei Chen

IMECE 2015; V02BT02A043doi:https://doi.org/10.1115/IMECE2015-50246

Abstract

View Articletitled, Shrinking Graphene Nanopore Using Electron-Beam-Induced Deposition for Single Molecule Detection

PDF

Topics: Electrons , Graphene , Nanopores , Shrinkage (Materials) , DNA , Focused ion beams , Membranes , Scanning electron microscopes , Sputtering (Irradiation)

A New Approach to the Synthesis of Carbon Nanotube-Polyhedral Oligomeric Silsesquioxane (POSS) Nanohybrids

Seyed Morteza Sabet, Hassan Mahfuz, Andrew C. Terentis, Javad Hashemi

IMECE 2015; V02BT02A044doi:https://doi.org/10.1115/IMECE2015-50925

Abstract

View Articletitled, A New Approach to the Synthesis of Carbon Nanotube-Polyhedral Oligomeric Silsesquioxane (POSS) Nanohybrids

PDF

Topics: Bonding , Carbon , Carbon nanotubes , Composite materials , Fourier transforms , Multi-walled carbon nanotubes , Nanotubes , Polymers , Spectroscopy , Temperature

Simulating Axial Force at the Substrate of Growing CNT Forests

Damola M. Ajiboye, Matthew R. Maschmann

IMECE 2015; V02BT02A045doi:https://doi.org/10.1115/IMECE2015-52013

Abstract

View Articletitled, Simulating Axial Force at the Substrate of Growing CNT Forests

PDF

Topics: Carbon nanotubes , Displacement , Degrees of freedom , Rotation , Spatiotemporal phenomena , Springs , Tension , Van der Waals forces

In Situ AFM Characterization of Deformation Behavior of Nano TiC Reinforced Inconel 718 Superalloy Prepared by Selective Laser Melting

Yachao Wang, Jing Shi, Xinnan Wang, Yun Wang

IMECE 2015; V02BT02A046doi:https://doi.org/10.1115/IMECE2015-52426

Abstract

View Articletitled, In Situ AFM Characterization of Deformation Behavior of Nano TiC Reinforced Inconel 718 Superalloy Prepared by Selective Laser Melting

PDF

Topics: Atomic force microscopy , Deformation , Lasers , Melting , Superalloys , Particulate matter , Nanoparticles , Composite materials , Additive manufacturing , Agglomeration (Materials)

Posters

Optimization of Forging Process Parameters and Anvil Design for Railway Axle During High-Speed Forging

Shiwen Du, Yongtang Li, Jianjun Song

IMECE 2015; V02BT02A047doi:https://doi.org/10.1115/IMECE2015-50695

Abstract

View Articletitled, Optimization of Forging Process Parameters and Anvil Design for Railway Axle During High-Speed Forging

PDF

Topics: Design , Forging , Optimization , Railroads , Rotation , Stress , Clearances (Engineering) , Dimensions , Energy consumption , Finite element methods

Motion Tuning Method of Linear Axes and Rotary Axis Under a Constant Cutting Speed Vector at End-Milling Point With a Five-Axis Controlled Machining Center

Takamaru Suzuki, Takakazu Ikegami, Takayuki Akai, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

IMECE 2015; V02BT02A048doi:https://doi.org/10.1115/IMECE2015-50844

Abstract

View Articletitled, Motion Tuning Method of Linear Axes and Rotary Axis Under a Constant Cutting Speed Vector at End-Milling Point With a Five-Axis Controlled Machining Center

PDF

Topics: Cutting , Machining centers , Milling , Shapes , Errors , Surface quality

Constitutive Modeling for Flow Behavior of As-Cast 1026 Carbon Steel Under Hot Compression Experiments

Li Ju, Yongtang Li, Jianhua Fu, Bufang Lei, Huiping Qi

IMECE 2015; V02BT02A049doi:https://doi.org/10.1115/IMECE2015-51222

Abstract

View Articletitled, Constitutive Modeling for Flow Behavior of As-Cast 1026 Carbon Steel Under Hot Compression Experiments

PDF

Topics: Carbon steel , Compression , Flow (Dynamics) , Modeling , Deformation , Stress , Temperature , Casting , Forging , Heating

Robotic Machining Processes

Optimizing the Compressed Air Consumption of Milling Machines

Daniel Schilberg, Florian Schüller, Folko Ridder

IMECE 2015; V02BT02A050doi:https://doi.org/10.1115/IMECE2015-50402

Abstract

View Articletitled, Optimizing the Compressed Air Consumption of Milling Machines

PDF

Topics: Compressed air , Milling machines , Optimization , Fluids , Leakage , Manufacturing , Valves

A Flexible Manufacturing System Architecture for On-Demand, Rate-Independent Production

Aditya N. Das, Nahum A. Torres, Dan O. Popa

IMECE 2015; V02BT02A051doi:https://doi.org/10.1115/IMECE2015-50797

Abstract

View Articletitled, A Flexible Manufacturing System Architecture for On-Demand, Rate-Independent Production

PDF

Topics: Computation , Cycles , End effectors , Errors , Feedback , Flexible manufacturing systems , Hardware , Kinematics , Manufacturing , Micromanipulation

Quantitative Analysis and Improvement of Countersink Depth in Stack Drilling

Xinguo Ma, Dan Wu, Chenggen Nan, Yuhao Gao

IMECE 2015; V02BT02A052doi:https://doi.org/10.1115/IMECE2015-50872

Abstract

View Articletitled, Quantitative Analysis and Improvement of Countersink Depth in Stack Drilling

PDF

Topics: Drilling , Deformation , Cutting , Errors , Manufacturing , Stiffness , Aerospace industry , Aircraft , Clamps (Tools) , Computer simulation

Study on the Stop Position of the Mobile Manipulator for Painting on Big Parts

S. Ren, X. Yang, G. Wang, Z. Liu, Q. Yu, K. Chen

IMECE 2015; V02BT02A053doi:https://doi.org/10.1115/IMECE2015-50907

Abstract

View Articletitled, Study on the Stop Position of the Mobile Manipulator for Painting on Big Parts

PDF

Topics: Manipulators , Painting , Computer simulation , End effectors , Machinery , Mechanical structures , Optimization , Risk , Robotics , Space

Reduction of Chatter Using a Probabilistic Approach

Haileyesus Endeshaw, Fisseha Alemayehu, Stephen Ekwaro-Osire

IMECE 2015; V02BT02A054doi:https://doi.org/10.1115/IMECE2015-53500

Abstract

View Articletitled, Reduction of Chatter Using a Probabilistic Approach

PDF

Topics: Chatter , Machining , Robots , Uncertainty , Computer software , Cutting , Cutting tools , Deburring , Grinding , Industrial plants

Sustainable Manufacturing

Additive Manufacturing of Carbides Using Renewable Resources

Monsur Islam, Rodrigo Martinez-Duarte

IMECE 2015; V02BT02A055doi:https://doi.org/10.1115/IMECE2015-52206

Abstract

View Articletitled, Additive Manufacturing of Carbides Using Renewable Resources

PDF

Topics: Additive manufacturing , Composite materials , Biopolymers , Heat , Heat treating (Metalworking) , Metals , Optimization , Rheology , Shapes

Strategy for Developing a System for Sustainable Product Design and Manufacture

Devdas Shetty, Claudio Campana, Lou Manzione, Suhash Ghosh

IMECE 2015; V02BT02A056doi:https://doi.org/10.1115/IMECE2015-52325

Abstract

View Articletitled, Strategy for Developing a System for Sustainable Product Design and Manufacture

PDF

Topics: Product design , Sustainability , Design , Maintenance , Manufacturing , Cycles , Lasers , Elevators , Green design , Surface roughness

Analysis of Power and Specific Cutting Energy Consumption in Orthogonal Machining of Al 6061-T6 Alloys at Transitional Cutting Speeds

Salman S. Warsi, Hussain I. Jaffery, Riaz Ahmad, Mushtaq Khan, Sohail Akram

IMECE 2015; V02BT02A057doi:https://doi.org/10.1115/IMECE2015-53290

Abstract

View Articletitled, Analysis of Power and Specific Cutting Energy Consumption in Orthogonal Machining of Al 6061-T6 Alloys at Transitional Cutting Speeds

PDF

Topics: Alloys , Cutting , Energy consumption , Machining , Emissions , Aerospace industry , Aluminum alloys , Automobiles , Biomedicine , Carbon dioxide

Energy Savings for Sustainability of Machining Process

Ganesh Bharambe, Prakash Dabeer, Kumar Digambar Sapate, Suresh M. Sawant

IMECE 2015; V02BT02A058doi:https://doi.org/10.1115/IMECE2015-53295

Abstract

View Articletitled, Energy Savings for Sustainability of Machining Process

PDF

Topics: Machining , Sustainability , Manufacturing , Cutting , Energy consumption , Fluids , Machinery , Braking , Circuits , Cutting tools

Tacit Knowledge Reuse in a Next Generation Sustainable Manufacturing Process

David A. Guerra-Zubiaga, Drew Heiling, Olusola Onadipe, Rojan-Kumar Katuwal, Prabin Dhital, Abdullah A. Mamun

IMECE 2015; V02BT02A059doi:https://doi.org/10.1115/IMECE2015-53745

Abstract

View Articletitled, Tacit Knowledge Reuse in a Next Generation Sustainable Manufacturing Process

PDF

Topics: Manufacturing , Sustainability , Manufacturing systems , Modeling

Ultrasonic Manufacturing

Material Characterization of Ultrasonically Consolidated Laminated Ti-Al Composites (UC-LMC)

İrfan Kaya, Ömer Necati Cora, Muammer Koç

IMECE 2015; V02BT02A060doi:https://doi.org/10.1115/IMECE2015-50566

Abstract

View Articletitled, Material Characterization of Ultrasonically Consolidated Laminated Ti-Al Composites (UC-LMC)

PDF

Topics: Composite materials , Temperature , Aluminum , Blanks , Oscillations , Titanium , Additive manufacturing , Bonding , Contamination , Delamination

Design and Development of Sonotrode for Ultrasonic Drilling

Mihir Tadvi, Akash Pandey, Jagdish Prajapati, Jimil Shah

IMECE 2015; V02BT02A061doi:https://doi.org/10.1115/IMECE2015-53023

Abstract

View Articletitled, Design and Development of Sonotrode for Ultrasonic Drilling

PDF

Topics: Design , Drilling , Resonance , Machinery , Computer software , Machining , Manufacturing , Ultrasonic machining , Vibration , Acoustics

Development of Metal Matrix Nanocomposites of AA6061 – SiCp Using Ultrasonic Cavitations in Squeeze Casting Process

Mohan Bangaru, Thirumal Azhagan Murugan, Rajadurai Arunachalam

IMECE 2015; V02BT02A062doi:https://doi.org/10.1115/IMECE2015-53151

Abstract

View Articletitled, Development of Metal Matrix Nanocomposites of AA6061 – SiCp Using Ultrasonic Cavitations in Squeeze Casting Process

PDF

Topics: Casting , Metals , Nanocomposites , Nanoparticles , Pressure , Aluminum , Particulate matter , Alloys , Collapse , Composite materials

Visualization, Informatics, and Digital Manufacturing Technologies

An Energy-Based Residual Stress Field Reconstruction Approach Using Limited Measurements

H.-B. Liu, Y.-P. Li, Y.-Q. Wang, X.-J. Sheng

IMECE 2015; V02BT02A063doi:https://doi.org/10.1115/IMECE2015-50915

Abstract

View Articletitled, An Energy-Based Residual Stress Field Reconstruction Approach Using Limited Measurements

PDF

Topics: Stress , Interpolation , Stress concentration , Algorithms , Boundary-value problems , Fatigue , Finite element methods , Finite element model , Splines , Stress tensors

A Method of Mobile Robotic Drilling Trajectory Planning for Large-Scale Components

Mengyu Wang, Lianshui Guo, Yunzhi Zhang, Xuemei Liang

IMECE 2015; V02BT02A064doi:https://doi.org/10.1115/IMECE2015-51448

Abstract

View Articletitled, A Method of Mobile Robotic Drilling Trajectory Planning for Large-Scale Components

PDF

Topics: Drilling , Robotics , Trajectories (Physics) , Robots , Simulation , Wings , Aircraft , Algorithms , Path planning

MATLAB Image Processing as a Viable Tool to Study Low Surface Roughness

Wesley S. Hunko, Vishnuvardhan Chandrasekaran, Lewis N. Payton

IMECE 2015; V02BT02A065doi:https://doi.org/10.1115/IMECE2015-51672

Abstract

View Articletitled, MATLAB Image Processing as a Viable Tool to Study Low Surface Roughness

PDF

Topics: Image processing , Matlab , Surface roughness , Interferometry , Texture (Materials) , Data acquisition , Microscopes , Polishing , Entropy , Finishes

The Creation of Collaborative Cyber Physical Environments for Micro Assembly

Yajun Lu, J. Cecil, Zak Zafar

IMECE 2015; V02BT02A066doi:https://doi.org/10.1115/IMECE2015-53154

Abstract

View Articletitled, The Creation of Collaborative Cyber Physical Environments for Micro Assembly

PDF

Topics: Microassembling , Manufacturing , Cloud computing , Collaboration , Manufacturing engineering , Path planning , Simulation , Virtual assembly

A New Strategy of Cavity Cutting Trajectory Generation in High Speed Machining

Yue Yin, LianShui Guo, Ning Han, Ji Zheng, Pengpeng Zhang

IMECE 2015; V02BT02A067doi:https://doi.org/10.1115/IMECE2015-53700

Abstract

View Articletitled, A New Strategy of Cavity Cutting Trajectory Generation in High Speed Machining

PDF

Topics: Cavities , Cutting , High speed machining , Trajectories (Physics) , Machining , Stress , Manufacturing , Computer programming , Corners (Structural elements) , Cutting tools

All Years

Proceedings Papers

Advanced Manufacturing

Computational Modeling and Simulation for Advanced Manufacturing

Innovative Product Design

Joining Technologies for Advanced Materials and Structures

Manufacturing Processes in Composite Materials

Nanomanufacturing: Novel Processes, Applications, and Process-Property Relationships

Posters

Robotic Machining Processes

Sustainable Manufacturing

Ultrasonic Manufacturing

Visualization, Informatics, and Digital Manufacturing Technologies

Email alerts

Most Read Proceedings Papers in IMECE

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only