Skip Nav Destination
Proceedings Papers
In This Volume
Volume 10: Micro- and Nano-Systems Engineering and Packaging
Micro- and Nano-Systems Engineering and Packaging
Applications of Micro and Nano Systems in Medicine and Biology
Detection of DNA in a Nanopore Fabricated From Glass Tube
IMECE 2013; V010T11A002https://doi.org/10.1115/IMECE2013-62789
Topics:
DNA
,
Glass
,
Nanopores
,
Electroosmosis
,
Paraffin wax
,
Biotechnology
,
Currents
,
Drag (Fluid dynamics)
,
Electric current
,
Electric fields
Rapid Capture of Rare Cancer Cells Using a High-Performance Microfluidic Chip
IMECE 2013; V010T11A003https://doi.org/10.1115/IMECE2013-62952
Topics:
Cancer
,
Microfluidics
,
Integrated circuits
,
Tumors
,
Blood
,
Geometry
,
DNA
,
Flow (Dynamics)
,
Microscopes
Concurrent Spatial Mapping of the Elasticity of Heterogeneous Soft Materials via a Polymer-Based Microfluidic Device: A Preliminary Study
IMECE 2013; V010T11A004https://doi.org/10.1115/IMECE2013-63837
Topics:
Elasticity
,
Microfluidics
,
Polymers
,
Stress
,
Transducers
,
Electrolytes
,
Pressing
,
Probes
Passive Split Ring Resonator for Continuous Physiological Sensing Through Conductivity Measurements
IMECE 2013; V010T11A008https://doi.org/10.1115/IMECE2013-66744
Topics:
Electrical conductivity
,
Physiology
,
Thermal conductivity
,
Biocompatibility
,
Coating processes
,
Coatings
,
Q-factor
,
Resonance
,
Sensors
,
Biomedicine
Applied Mechanics and Materials
Nano-Indentation for Characterizing Mechanical Properties of Soft Materials
IMECE 2013; V010T11A009https://doi.org/10.1115/IMECE2013-62056
Topics:
Mechanical properties
,
Nanoindentation
,
Finite element analysis
,
Friction
,
Biomedicine
,
Computer simulation
,
Computers
,
Cycles
,
Displacement
,
Elastic moduli
Wire-Electric Gyroscope
IMECE 2013; V010T11A010https://doi.org/10.1115/IMECE2013-63287
Topics:
Wire
,
Electric current
,
Rotation
,
Sensors
,
Speed of light
Microstructural Analysis of Laser Micro-Welds Between Electrode Materials for Li-Ion Battery Applications
IMECE 2013; V010T11A011https://doi.org/10.1115/IMECE2013-64689
Topics:
Electrodes
,
Lasers
,
Lithium-ion batteries
,
Welded joints
,
Batteries
,
Aluminum
,
Automotive industry
,
Copper
,
Failure
,
Fiber lasers
Lead Zirconate Titanate Nanotube Composite for Ultrasound Transducer Application
IMECE 2013; V010T11A012https://doi.org/10.1115/IMECE2013-64980
Topics:
Composite materials
,
Nanotubes
,
Ultrasonic transducers
,
Transducers
,
Fibers
,
Manufacturing
,
Acoustics
,
Active materials
,
Aluminum
,
Electrodes
Structural Behavior of Microbeams Actuated by Out-of-Plane Electrostatic Fringing-Fields
IMECE 2013; V010T11A014https://doi.org/10.1115/IMECE2013-65770
Topics:
Microbeams
,
Electrodes
,
Finite element methods
,
Microelectromechanical systems
,
Stress
,
Eigenvalues
,
Fittings
,
Gates (Closures)
,
Microactuators
Stress Relaxation Measurement of Agar Using a Polymer-Based Microfluidic Device
IMECE 2013; V010T11A016https://doi.org/10.1115/IMECE2013-66054
Topics:
Agar
,
Microfluidics
,
Polymers
,
Relaxation (Physics)
,
Stress
,
Displacement
,
Electrolytes
,
Probes
,
Tissue engineering
,
Transducers
Spatial Optimization of Thermal Conductivity to Enable Precise Fluid Heating and/or Cooling
IMECE 2013; V010T11A017https://doi.org/10.1115/IMECE2013-66468
Topics:
Cooling
,
Fluids
,
Heating
,
Optimization
,
Thermal conductivity
,
Geometry
,
Temperature
,
Temperature profiles
,
Composite materials
,
Cycles
Carbon-Based Nano-Materials and Applications
Computational Studies on MEMS and Nanostructures
A Reduced-Order Model of a Microfluidic Transistor
IMECE 2013; V010T11A025https://doi.org/10.1115/IMECE2013-63711
Topics:
Microfluidics
,
Transistors
,
Membranes
,
Pressure
,
Computer simulation
,
Flow (Dynamics)
,
Fluids
,
Inertia (Mechanics)
,
Microchannels
,
Momentum
Dynamic Analysis of Bulk Acoustic Wave Piezoelectric Micropumps: Effects of Inlet-Outlet Port Angles and Overall Pump Size
IMECE 2013; V010T11A027https://doi.org/10.1115/IMECE2013-66211
Topics:
Acoustics
,
Dynamic analysis
,
Micropumps
,
Pumps
,
Waves
,
Flow (Dynamics)
,
Actuators
,
Fluid dynamics
,
Compressible flow
,
Deflection
Dynamic Analysis of Piezoelectric Valveless Micropumps: Effects of Piezoelectric Transducer Material
IMECE 2013; V010T11A028https://doi.org/10.1115/IMECE2013-66215
Topics:
Dynamic analysis
,
Micropumps
,
Piezoelectric transducers
,
Flow (Dynamics)
,
Actuators
,
Pumps
,
Fluid dynamics
,
Prisms (Optics)
,
Acoustics
,
Borosilicate glasses
Numerical Investigation of Fully Developed Fluid Flow and Heat Transfer in Double-Trapezoidal Microchannels
IMECE 2013; V010T11A029https://doi.org/10.1115/IMECE2013-66734
Topics:
Fluid dynamics
,
Heat transfer
,
Microchannels
,
Poiseuille flow
,
Boundary-value problems
,
Finite volume methods
,
Fluids
,
Shapes
,
Slip flow
,
Wall temperature
Design and Fabrication Analysis, Processes, and Technology for Micro and Nano Devices and Systems
Performance Model for Optically Driven Micropumps With Carbon Opacified Aerogel Membranes
IMECE 2013; V010T11A030https://doi.org/10.1115/IMECE2013-62197
Topics:
Carbon
,
Membranes
,
Micropumps
,
Compressors
,
Creep
,
Flow (Dynamics)
,
Pressure
,
Heat
,
Heating
,
Particulate matter
Quality Aspects of Electrochemical Micro Drilling With Insulated Tool and Masked Workpiece
IMECE 2013; V010T11A031https://doi.org/10.1115/IMECE2013-62864
Topics:
Drilling
,
Copper
,
Wire
,
Cycles
,
Electrodes
,
Electrolytes
,
Micromachining
,
Microscopes
,
Photography
Controlled Efficiency During Drilling With a High Intensity Beam
IMECE 2013; V010T11A032https://doi.org/10.1115/IMECE2013-63061
Topics:
Collapse
,
Drilling
,
Flow (Dynamics)
,
Compressible flow
,
Manufacturing technology
,
Materials processing
,
Packaging
,
Physics
,
Power density
,
Probes
Fabrication of Al2O3 Nanopore Sensors for DNA Detection
IMECE 2013; V010T11A033https://doi.org/10.1115/IMECE2013-63154
Topics:
DNA
,
Manufacturing
,
Nanopores
,
Sensors
,
Focused ion beams
,
Signal to noise ratio
Fatigue Life Prediction and Optimal Design of a Flexure Based Micro-Motion Stage
IMECE 2013; V010T11A034https://doi.org/10.1115/IMECE2013-63581
Topics:
Bending (Stress)
,
Design
,
Fatigue life
,
Hinges
,
Fatigue
,
Stress
,
Dimensions
,
Fatigue strength
,
Actuators
,
Design methodology
Mold Alignment System for Double-Sided Micro Hot Embossing Using Kinematic Constraints
IMECE 2013; V010T11A035https://doi.org/10.1115/IMECE2013-63670
Topics:
Embossing
,
Kinematics
,
Tooling
Evaporative Particle Deposition on Superhydrophobic Surfaces
IMECE 2013; V010T11A036https://doi.org/10.1115/IMECE2013-63928
Topics:
Particulate matter
,
Drops
,
Evaporation
,
Temperature
,
Heating
,
Shapes
,
Diffusion (Physics)
,
Latex
,
Manufacturing
,
Nanowires
An Experimental Investigation on the Fabrication of Microlens Array Using Meniscus of Photoresist
IMECE 2013; V010T11A039https://doi.org/10.1115/IMECE2013-64275
Topics:
Manufacturing
,
Photoresists
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
,
Geometry
,
Semiconductor wafers
,
Silicon
,
Viscosity
Fabrication and Characterization of Micro-Patterned Magnetorheological Elastomeric Structures
IMECE 2013; V010T11A041https://doi.org/10.1115/IMECE2013-64535
Topics:
Fluids
,
Iron
,
Manufacturing
,
Particulate matter
,
Anisotropy
,
Elastomers
,
Machinery
,
Magnetic fields
,
Magnetorheology
,
Plasma desorption mass spectrometry
Finite Element Analysis for Reliable Replication of Alignment Structures in Micro Hot Embossing
IMECE 2013; V010T11A043https://doi.org/10.1115/IMECE2013-64829
Topics:
Embossing
,
Finite element analysis
,
Molding
,
Polymers
,
Cavities
,
Flow (Dynamics)
,
Temperature
,
Computer software
,
Finite element methods
,
Finite element model
Characterization of Metal Oxide Sensor Thin Films Deposited by Spray Pyrolysis
IMECE 2013; V010T11A044https://doi.org/10.1115/IMECE2013-65136
Topics:
Metals
,
Pyrolysis
,
Sensors
,
Sprays
,
Thin films
Fabrication of Hybrid Micro-Nanofluidic Devices With Centimeter Long Ultra-Low Aspect Ratio Nanochannels
IMECE 2013; V010T11A045https://doi.org/10.1115/IMECE2013-65763
Topics:
Manufacturing
,
Nanofluidics
,
Bonding
,
Plasma desorption mass spectrometry
,
Dimensions
,
Microfluidics
,
Adhesion
,
Borosilicate glasses
,
Flow (Dynamics)
,
Glass
Simple, Fast, and Low Cost Fabrication Methods of Microchannels for Manipulation of Living Cells
IMECE 2013; V010T11A046https://doi.org/10.1115/IMECE2013-66152
Topics:
Biological cells
,
Manufacturing
,
Microchannels
,
Polymers
,
Microfluidics
,
Embossing
,
Fluids
,
Glass
,
Additive manufacturing
,
Adhesives
Dynamics and Control of Micro and Nano Systems
Application of DQM Method to the Steady State Analysis of Thermo-Tunneling Electrodes
IMECE 2013; V010T11A048https://doi.org/10.1115/IMECE2013-64676
Topics:
Electrodes
,
Steady state
,
Tunnel construction
,
Coulombs
,
Stability
,
Bifurcation
,
Electronics
,
Electrons
,
Energy generation
,
Equilibrium (Physics)
Fluid Engineering in Micro- and Nanosystems
Experimental and Numerical Study of the Effects of Asymmetric Micro Ratchets on Pool Boiling Performance
IMECE 2013; V010T11A049https://doi.org/10.1115/IMECE2013-62982
Topics:
Pool boiling
,
Nucleate boiling
,
Cooling
,
Electronics
,
Engineering simulation
,
Fluids
,
Flux (Metallurgy)
,
Heat
,
Heat conduction
,
Heat exchangers
Experimental Study of the Characteristics of Gas Impinging Streams Using PIV Technique
IMECE 2013; V010T11A051https://doi.org/10.1115/IMECE2013-63902
Topics:
Compressors
,
Drops
,
Flow (Dynamics)
,
Heat
,
Jets
,
Mass transfer
,
Nozzles
,
Particulate matter
High-Speed Aerosol Flow Through Micro-Nozzles for Direct-Write Processes
Justin M. Hoey, Sourin Bhattacharya, Artur Lutfurakhmanov, Michael Robinson, Orven F. Swenson, Iskander S. Akhatov
IMECE 2013; V010T11A052https://doi.org/10.1115/IMECE2013-65271
Topics:
Aerosols
,
Flow (Dynamics)
,
Micronozzles
,
Particulate matter
,
Printing
,
Modeling
,
Fluids
,
Magnus effect
,
Nozzles
,
Rotation
Sizing and Positioning Algorithm for 1 µm to 10 µm Particles Using Shadowgraphy
IMECE 2013; V010T11A053https://doi.org/10.1115/IMECE2013-65286
Topics:
Algorithms
,
Particulate matter
,
Aerosols
,
Flow (Dynamics)
,
Imaging
Thermal and Optical Analysis of a Stacked Photobioreactor Design
IMECE 2013; V010T11A055https://doi.org/10.1115/IMECE2013-66263
Topics:
Design
,
Bacteria
,
Temperature
,
Waveguides
,
Fuels
,
Heat
,
Slabs
,
Energy efficiency
,
Fluids
,
Packing (Shipments)
Investigation of an Unsteady Flow Behavior Through a Valveless Microvalve With Step Expansion Shape
IMECE 2013; V010T11A056https://doi.org/10.1115/IMECE2013-66310
Topics:
Shapes
,
Unsteady flow
,
Flow (Dynamics)
,
Pressure
,
Vortices
,
Geometry
,
Microfluidics
,
Micropumps
,
Algorithms
,
Computer simulation
Manufacturing, Materials and Processes in Electronics and Photonics Packaging
Inhibiting the Re-Deposition of AuSn4 on Au/Ni Metallization Pads by Varying the Accessibility of Cu in Isothermally Aged SAC305 Solder Joints
IMECE 2013; V010T11A057https://doi.org/10.1115/IMECE2013-66803
Topics:
Solder joints
,
Copper
,
Tin
,
Annealing
,
Intermetallic compounds
,
Nickel
,
Brittleness
,
Finishes
,
Plating
,
Printed circuit boards
Micro and Nano Devices
A Monte Carlo Study of Molecular Spintronics Devices
IMECE 2013; V010T11A058https://doi.org/10.1115/IMECE2013-62413
Topics:
Spintronics
,
Electrodes
,
Temperature
,
Computers
,
Couplings
,
Engineering simulation
,
Simulation
,
Control systems
,
Design
,
Instrumentation
Studies of the Dimensional Effects of SU-8 and PDMS Pillar Arrays on Hydrophobicity
IMECE 2013; V010T11A059https://doi.org/10.1115/IMECE2013-62692
Topics:
Columns (Structural)
,
Hydrophobicity
,
Plasma desorption mass spectrometry
,
Dimensions
,
Drops
,
Water
,
Coatings
,
Lithography
,
Photolithography
,
Polymers
Contactless Superconducting Magnetic Instrument for Precise Positioning in Cryogenic Environments
J. L. Perez-Diaz, I. Valiente-Blanco, E. Diez-Jimenez, J. Sanchez-Garcia-Casarrubios, M. A. Alvarez-Valenzuela, C. Cristache, J. Serrano, F. Romera-Juarez, D. Gonzalez-de-Maria, M. Lamesans, H. Argelaguet-Vilaseca
IMECE 2013; V010T11A064https://doi.org/10.1115/IMECE2013-63742
The Effect of Geometry on Sample Leakage in Multi-Channel Microfluidic Devices
IMECE 2013; V010T11A065https://doi.org/10.1115/IMECE2013-64079
Topics:
Geometry
,
Leakage
,
Microfluidics
,
Electrokinetics
,
Flow (Dynamics)
,
Contamination
,
Design
,
Engineering simulation
,
Finite element methods
,
Manufacturing
Experimental Study on Energy Harvesting From Salinity Gradient by Reverse Electrodialysis in Ag/AgCl Deposited AAO Nanochannel Array
IMECE 2013; V010T11A066https://doi.org/10.1115/IMECE2013-64364
Topics:
Aluminum
,
Cathode rays
,
Density
,
Electric current
,
Electron beams
,
Energy conversion
,
Energy generation
,
Energy harvesting
,
Evaporation
,
Ionization
Characterization of Micromachined Seesaw Type Microphone
IMECE 2013; V010T11A068https://doi.org/10.1115/IMECE2013-64974
Response Surface Based Optimization of an Electro-Thermal Microactuator for High Track Density Optical Disk Drives
IMECE 2013; V010T11A069https://doi.org/10.1115/IMECE2013-65375
Topics:
Density
,
Disks
,
Microactuators
,
Optimization
,
Response surface methodology
,
Design
,
Mirrors
,
Displacement
,
Electronics
,
Experimental design
Micro Double Pressure Sensor for Measuring the Applying Forces in Balloon Angioplasty
IMECE 2013; V010T11A071https://doi.org/10.1115/IMECE2013-65705
Topics:
Pressure sensors
,
Catheters
,
Manufacturing
,
Sensors
,
Bridges (Structures)
,
Cardiology
,
Cardiovascular system
,
Circuit design
,
Circuits
,
Design
Hollow Fiber Membrane (HFM) Facilitated CO2 Delivery to a Cyanobacteria Layer for Biofuel Production
IMECE 2013; V010T11A073https://doi.org/10.1115/IMECE2013-66317
Topics:
Biofuel
,
Carbon dioxide
,
Fibers
,
Membranes
,
Bacteria
,
Mass transfer
,
Water
,
Biodiesel
,
Bubbles
,
Carbon
Modeling and Simulation in Electronics and Photonics Packaging
Chip Package Co-Design: Effect of Substrate Warpage on BEOL Reliability
IMECE 2013; V010T11A074https://doi.org/10.1115/IMECE2013-65877
Topics:
Design
,
Reliability
,
Warping
,
Temperature
,
Stress
,
Fracture (Materials)
,
Fracture mechanics
,
Flip-chip
,
Flip-chip assemblies
,
Manufacturing
High Cycle Fatigue Life-Prediction for Lead-Free Interconnects Under Simultaneous High Temperature and Vibration
IMECE 2013; V010T11A075https://doi.org/10.1115/IMECE2013-66820
Topics:
High cycle fatigue
,
High temperature
,
Vibration
,
Temperature
,
Solders
,
Stress
,
Alloys
,
Electronics
,
Failure
,
Failure mechanisms
Nanoengineering for Energy and Sustainability (NEES)
Exploring Lithium-Ion Intensity and Distribution via a Time-of-Flight Secondary Ion Mass Spectroscopy
IMECE 2013; V010T11A077https://doi.org/10.1115/IMECE2013-63013
Topics:
Flight
,
Lithium
,
Mass spectrometry
,
Batteries
,
Electrodes
,
Ions
,
Lithium-ion batteries
,
Phase transitions
,
Secondary ion mass spectrometry
Nanostructured Materials
Fire Retardancy of Polymeric Materials Incorporated With Nanoscale Inclusions
IMECE 2013; V010T11A080https://doi.org/10.1115/IMECE2013-66158
Topics:
Fire
,
Nanoclays
,
Nanocomposites
,
Nanoscale phenomena
Quality and Reliability in Electronics and Photonics Packaging
Prognostic Health Monitoring Method for Fatigue Failure of Solder Joints on Printed Circuit Boards Based on a Canary Circuit
IMECE 2013; V010T11A082https://doi.org/10.1115/IMECE2013-65317
Topics:
Circuits
,
Fatigue failure
,
Printed circuit boards
,
Solder joints
,
Ball-Grid-Array packaging
,
Stress
,
Density
,
Failure
,
Packaging
,
Probability
Thermal Management in Electronics and Photonics Packaging
Pressure Drop and Heat Transfer Characteristics of Pin Fin Enhanced Microgaps in Single Phase Microfluidic Cooling
IMECE 2013; V010T11A086https://doi.org/10.1115/IMECE2013-65618
Topics:
Cooling
,
Heat transfer
,
Microfluidics
,
Pressure drop
,
Dimensions
,
Fins
,
Computer simulation
,
Delays
,
Errors
,
Friction
Dimensionless Optimization of Thermoelectric Cooler Performance When Integrated Within a Thermal Resistance Network
IMECE 2013; V010T11A087https://doi.org/10.1115/IMECE2013-65940
Topics:
Optimization
,
Thermal resistance
,
Thermoelectric coolers
,
Design
,
Energy dissipation
,
Heat
,
Thermal systems
,
Cooling
,
Electronics
,
Geometry
Optimization of a Thermoelectric Cooler for Time-Varying Heat Load and Sink Temperature
IMECE 2013; V010T11A088https://doi.org/10.1115/IMECE2013-65942
Topics:
Heat
,
Optimization
,
Stress
,
Temperature
,
Thermoelectric coolers
,
Cycles
,
Thermal conductivity
,
Computer cooling
,
Cooling
,
Design
Computational Study of Air Cooled Data Centers Assisted With Locally Distributed Water to Air Heat Exchangers
IMECE 2013; V010T11A089https://doi.org/10.1115/IMECE2013-65958
Topics:
Data centers
,
Heat exchangers
,
Water
,
Heat
,
Cooling
,
Air flow
,
Stress
,
Temperature
,
Thermal management
,
Density
Experimental Characterization of Thin-Film Thermoelectric Based Active Cooling Modules
IMECE 2013; V010T11A090https://doi.org/10.1115/IMECE2013-66318
Topics:
Cooling
,
Experimental characterization
,
Thin films
,
Errors
,
Heat flux
,
Thermoelectric cooling
,
Vacuum
,
Calibration
,
Defense industry
,
Dimensions