Topics: Alloys , Aluminum alloys , Capillarity , Diffusion (Physics) , Equilibrium (Physics) , Gases , Hydrogen , Modeling , Pressure , Resolution (Optics)

Simulations of the Effects of Mold Properties on Directional Solidification

Mark A. Lauer, David R. Poirier, Robert G. Erdmann, Luke Johnson, Surendra N. Tewari

IMECE 2013; V02BT02A002doi:https://doi.org/10.1115/IMECE2013-66830

Abstract

View Article

PDF

Topics: Engineering simulation , Simulation , Solidification , Alloys , Thermal properties , Convection , Cross section (Physics) , Finite element analysis , Flow (Dynamics) , Geometry

Innovations in Processing, Characterization, and Applications of Bioengineered Materials

Mechanical Characteristics of an Anodized Magnesium Alloy for Biodegradable Implants

Leon White, Sudheer Neralla, Ruben Kotoka, Yongseok Jang, Yeoheung Yun, Jagannathan Sankar

IMECE 2013; V02BT02A003doi:https://doi.org/10.1115/IMECE2013-63929

Abstract

View Article

PDF

Topics: Biodegradation , Magnesium alloys , Mechanical properties , Coatings , Electrolytes , Alloys , Corrosion , Corrosion protection , Corrosion resistance , Magnesium (Metal)

Extraction and Production of Keratin-Based Nanofibers for Biomedical Applications

David Jarvis, Angela Edwards, Narayan Bhattarai

IMECE 2013; V02BT02A004doi:https://doi.org/10.1115/IMECE2013-64501

Abstract

View Article

PDF

Topics: Biomedicine , Nanofibers , Electrospinning , Biological tissues , Biomaterials , Drug delivery systems , Fibers , Polymer solutions , Polymers , Scanning electron microscopes

Fabrication of Three-Dimensional Tissue Scaffold Arrays Using Laser Foaming

JinGyu Ock, Bryan T. Philpott, Wei Li

IMECE 2013; V02BT02A005doi:https://doi.org/10.1115/IMECE2013-65195

Abstract

View Article

PDF

Topics: Lasers , Manufacturing , Polymers , Tissue scaffolds

Structural and Mechanical Properties of Mg/MgO and Mg/Al₂O₃ Nanolaminate Coating for Implant Applications

Ruben Kotoka, Sudheer Neralla, Sergey Yarmolenko, Devdas Pai, Jag Sankar

IMECE 2013; V02BT02A006doi:https://doi.org/10.1115/IMECE2013-65410

Abstract

View Article

PDF

Topics: Coatings , Magnesium (Metal) , Mechanical properties , Sputtering (Irradiation)

Joining Technologies

Torque Vibrations in Automatized Screw Assembly: Reasons, Elimination and Virtual Testing

T. Hoernig, H. W. Kopfer, C. Friedrich

IMECE 2013; V02BT02A007doi:https://doi.org/10.1115/IMECE2013-62347

Abstract

View Article

PDF

Topics: Friction , Manufacturing , Screws , Stick-slip , Testing , Torque , Vibration

Experimentally Validated Thermo-Mechanically Coupled FE Simulations of Al/Mg Friction Stir Welded Joints

A. H. Kheireddine, A. H. Ammouri, G. T. Kridli, R. F. Hamade

IMECE 2013; V02BT02A008doi:https://doi.org/10.1115/IMECE2013-62691

Abstract

View Article

PDF

Topics: Engineering simulation , Friction , Simulation , Welded joints , Flow (Dynamics) , Computer simulation , Finite element model , Welding , Aluminum , Computer software

Analysis on Failure Mechanism of Scarf Joints With Brittle-Ductile Adhesives Subjected to Uniaxial Tensile Loads

Lijuan Liao, Toshiyuki Sawa, Chenguang Huang

IMECE 2013; V02BT02A009doi:https://doi.org/10.1115/IMECE2013-62854

Abstract

View Article

PDF

Topics: Adhesives , Brittleness , Failure mechanisms , Stress , Failure , Displacement , Load bearing capacity , Numerical analysis , Shapes

Numerical Analysis of Residual Stresses in V-Butt Welded Joint of Two Dissimilar Pipes

Gurinder Singh Brar, Gurdeep Singh

IMECE 2013; V02BT02A010doi:https://doi.org/10.1115/IMECE2013-62873

Abstract

View Article

PDF

Topics: Drilling , Finite element analysis , Numerical analysis , Pipes , Residual stresses , Strain gages , Welded joints

Product Innovation Needs Improved Design Process of Screw Joints

C. Friedrich, H. Hubbertz

IMECE 2013; V02BT02A011doi:https://doi.org/10.1115/IMECE2013-62927

Abstract

View Article

PDF

Topics: Design , Innovation , Screws , Optimization , Computer-aided design , Design methodology , Finite element analysis , Stress , Actuators , Bolted joints

Measurements and Models for the Thermal Conductance Through Surfaces Joined by Screws

Nicholas Konkle, Adam Pautsch, Yosef Amir

IMECE 2013; V02BT02A012doi:https://doi.org/10.1115/IMECE2013-63009

Abstract

View Article

PDF

Topics: Screws , Thermal conductivity , Pressure , Electrical conductance , Aluminum , Geometry , Computer cooling , Contact resistance , Cooling , Heat conduction

Bending Effect in Concentric Bolted Joints Under Transverse Load

Yosef Amir, Saravanakumar Iyyanar, Aravind Devali, Muniratnam Kumar

IMECE 2013; V02BT02A013doi:https://doi.org/10.1115/IMECE2013-63201

Abstract

View Article

PDF

Topics: Bolted joints , Stress , Bending (Stress) , Failure , Tension , Design , Finite element analysis , Fracture (Materials) , Fracture (Process) , Risk

Improving Tightening Reliability on Bolted Joints for Calibrated Wrench Method (An Analysis on Optimum Tightening Torque by Confidence Limit Ellipse)

Soichi Hareyama, Ken-ichi Manabe, Makoto Nakashima

IMECE 2013; V02BT02A014doi:https://doi.org/10.1115/IMECE2013-63387

Abstract

View Article

PDF

Topics: Bolted joints , Reliability , Torque , Stress , Tension , Screws , Shapes , Engineering standards , Fatigue , Grasping

Fatigue Life Characterisation of Interference Fitted Joints

D. Croccolo, M. De Agostinis, G. Olmi

IMECE 2013; V02BT02A015doi:https://doi.org/10.1115/IMECE2013-63515

Abstract

View Article

PDF

Topics: Fatigue , Fatigue life , Fatigue testing , Computer simulation , Manufacturing , Stress , Bending (Stress) , Carbon steel , Endurance limit , Finite element analysis

Friction Self-Piercing Riveting (F-SPR) of AA6061-T6 to AZ31B

YongBing Li, ZeYu Wei, YaTing Li, ZhaoZhao Wang, Xiaobo Zhu

IMECE 2013; V02BT02A016doi:https://doi.org/10.1115/IMECE2013-64212

Abstract

View Article

PDF

Topics: Friction , Riveting , Joining , Ductility , Magnesium alloys , Aluminum , Aluminum alloys , Composite materials , Fracture (Materials) , Rivets

An Analysis of an Impact of the Background Atmosphere on the Aluminum Brazing Joint Formation

Cheng-Nien Yu, Doug K. Hawksworth, Dusan P. Sekulic

IMECE 2013; V02BT02A017doi:https://doi.org/10.1115/IMECE2013-64776

Abstract

View Article

PDF

Topics: Aluminum , Brazing , Temperature , Clearances (Engineering) , Coating processes , Coatings , Furnaces , Heating , Nitrogen , Oxygen

Effect of Bonding Pressure on Joint Formation by Diffusion Bonding of Ti-6Al-4V and Mg-AZ31

Anas M. Atieh, Tahir I. Khan

IMECE 2013; V02BT02A018doi:https://doi.org/10.1115/IMECE2013-65131

Abstract

View Article

PDF

Topics: Bonding , Diffusion bonding (Metals) , Pressure , Alloys , Magnesium (Metal) , Mechanical properties , Solidification , Aerospace industry , Corrosion resistance , Engineering systems and industry applications

Elasto-Plastic Stress Analysis of the Characteristics for T-Flange Bolted Joints Under External Loading

Yuya Omiya, Toshiyuki Sawa

IMECE 2013; V02BT02A019doi:https://doi.org/10.1115/IMECE2013-65148

Abstract

View Article

PDF

Topics: Bolted joints , Flanges , Stress analysis (Engineering) , Stress , Bearings , Finite element methods , Design , Reliability , Stress concentration

New Design Formula for Bolted Joints Under Tensile Loads

Toshiyuki Sawa, Yuya Omiya

IMECE 2013; V02BT02A020doi:https://doi.org/10.1115/IMECE2013-65150

Abstract

View Article

PDF

Topics: Bolted joints , Design , Stress , Elastic constants , Cylinders , Finite element methods , Finite element model , Manufacturing , Elasticity

Characterization and Optimization of Rotational Friction Welding for Small Stainless Steel Tubes

Alex Adams, David Miller

IMECE 2013; V02BT02A021doi:https://doi.org/10.1115/IMECE2013-66094

Abstract

View Article

PDF

Topics: Friction welding , Optimization , Stainless steel , Forging , Welded joints , Friction , Pressure , Temperature , Testing , Heat

Numerical Analysis of Self-Pierce Riveting of Magnesium Alloys

J. F. C. Moraes, J. B. Jordon

IMECE 2013; V02BT02A022doi:https://doi.org/10.1115/IMECE2013-66668

Abstract

View Article

PDF

Topics: Magnesium alloys , Numerical analysis , Riveting , Joining , Metals , Regulations , Temperature , Weight (Mass) , Automobiles , Damage

Lean and Sustainable Processes and Methodologies

Optimization of Cutting Parameters in Turning of AISI 1018 Steel With Constant Material Removal Rate Using Robust Design for Minimizing Cutting Power

C. Camposeco-Negrete, J. Calderón-Nájera, J. C. Miranda-Valenzuela

IMECE 2013; V02BT02A023doi:https://doi.org/10.1115/IMECE2013-62520

Abstract

View Article

PDF

Topics: Cutting , Design , Energy consumption , Optimization , Steel , Turning

Low Cycle Fatigue Property of Injection Molded Jute/PP Composites

Xiahui Liu, Jian Wang, Cuntao Wang, Weiguang Song, Yuqiu Yang

IMECE 2013; V02BT02A024doi:https://doi.org/10.1115/IMECE2013-63356

Abstract

View Article

PDF

Topics: Composite materials , Fatigue properties , Fibers , Injection molding , Jute fiber , Low cycle fatigue , Cycles , Design , Pultrusion , Weight (Mass)

Biologically Inspired Closed Loop Manufacturing Networks

Astrid Layton, Bert Bras, John Reap, Marc Weissburg

IMECE 2013; V02BT02A025doi:https://doi.org/10.1115/IMECE2013-63958

Abstract

View Article

PDF

Topics: Food products , Manufacturing

A Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing

J. Goodland, I. F. Campean, A. Caunce, J. L. Victory, M. L. Jupp

IMECE 2013; V02BT02A026doi:https://doi.org/10.1115/IMECE2013-64606

Abstract

View Article

PDF

Topics: Aerospace industry , Failure mechanisms , Manufacturing , Aircraft , Automotive industry , Flow (Dynamics) , Manufacturing engineering , Robust control , Task analysis

Definition of a Protocol for Implementing Lean Production Methodology in Textile and Clothing Case Studies

Laura Costa Maia, Anabela Carvalho Alves, Celina P. Leão

IMECE 2013; V02BT02A027doi:https://doi.org/10.1115/IMECE2013-64739

Abstract

View Article

PDF

Topics: Textiles , Feedback , Industrial engineering , Instrumentation

Near Minimum Material Zone: A New Concept to Reduce the Weight of the Aircraft Components in Machining Using Lean Six Sigma Methodology

Ganesh Kumar Nithyanandam, Matthew Franchetti, Radhakrishnan Pezhinkattil

IMECE 2013; V02BT02A028doi:https://doi.org/10.1115/IMECE2013-65555

Abstract

View Article

PDF

Topics: Aircraft , Machining , Weight (Mass) , Dimensions , Computer numerical control machine tools , Machinery

Manufacturing and Processing of Nanostructured Materials

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Michael J. Koludrovich, Yong X. Gan

IMECE 2013; V02BT02A029doi:https://doi.org/10.1115/IMECE2013-62300

Abstract

View Article

PDF

Topics: Metallic composites , Nanoparticles , Nanocomposites , Agglomeration (Materials) , Thin films , Metals , Electrolytes , Electrons , Mechanical properties

Fabrication of Graphene Reinforced Aluminum Composite by Semi-Solid Processing

Mina Bastwros, Gap-Yong Kim, Kun Zhang, Shiren Wang

IMECE 2013; V02BT02A030doi:https://doi.org/10.1115/IMECE2013-63715

Abstract

View Article

PDF

Topics: Aluminum , Composite materials , Graphene , Manufacturing , Mechanical properties , Ball milling , Compacting , Engineering systems and industry applications , Fracture (Materials) , Fracture (Process)

Laser-Assisted on Demand Growth of Semiconducting Nanowires

Sang-gil Ryu, David J. Hwang, Eunpa Kim, Jae-hyuck Yoo, Costas P. Grigoropoulos

IMECE 2013; V02BT02A031doi:https://doi.org/10.1115/IMECE2013-65696

Abstract

View Article

PDF

Topics: Lasers , Nanowires , Shapes , Germanium , Heat , Temperature , Catalysts , Cathode ray oscilloscopes , Electron beams , Furnaces

Nanomanufacturing

Laser Diagnostics of Plasma in Synthesis of Graphene-Based Materials

Alfredo D. Tuesta, Aizaz Bhuiyan, Robert P. Lucht, Timothy S. Fisher

IMECE 2013; V02BT02A032doi:https://doi.org/10.1115/IMECE2013-63823

Abstract

View Article

PDF

Topics: Graphene , Lasers , Plasmas (Ionized gases) , Temperature , Plasma generators , Carbon , Pressure , Carbon nanotubes , Chemical vapor deposition , Elastic scattering

Influences of Silicon Crystal Anisotropy in Nano-Machining Processes Using AFM

Yachao Wang, Jing Shi, Xinnan Wang

IMECE 2013; V02BT02A033doi:https://doi.org/10.1115/IMECE2013-65674

Abstract

View Article

PDF

Topics: Anisotropy , Atomic force microscopy , Crystals , Friction , Machining , Silicon crystals

A Coupled Electromagnetic and Thermal Model for Picosecond and Nanometer Scale Plasmonic Lithography Process

Ion-Hong Chao, Liang Pan, Cheng Sun, Xiang Zhang, Adrienne S. Lavine

IMECE 2013; V02BT02A034doi:https://doi.org/10.1115/IMECE2013-66413

Abstract

View Article

PDF

Topics: Lithography , Nanoscale phenomena , Resolution (Optics) , Phase change materials , Diffraction , Heat transfer , Lasers , Lenses (Optics) , Materials properties , Nanofabrication

Process Modeling in Advanced Manufacturing

Experimental Investigations Into the Finishing Force and Torque in Magnetic Abrasive Finishing Process

R. S. Mulik, P. M. Pandey

IMECE 2013; V02BT02A035doi:https://doi.org/10.1115/IMECE2013-62365

Abstract

View Article

PDF

Topics: Finishing , Torque , Electromagnets , Damage , Design , Dynamometers , Integrated circuits , Magnetic fields , Particulate matter , Scanning electron microscopy

Productivity Theory for Industrial Automated Lines

Ryspek Usubamatov, Tan Chan Sin, Mohd Fidzwan B. Md. Amin Hamzas

IMECE 2013; V02BT02A036doi:https://doi.org/10.1115/IMECE2013-62722

Abstract

View Article

PDF

Topics: Assembly lines , Design , Failure , Machinery , Machining , Product quality , Reliability

Automation in Manufacturing Operation of Crankshaft

Nand K. Jha

IMECE 2013; V02BT02A037doi:https://doi.org/10.1115/IMECE2013-62855

Abstract

View Article

PDF

Topics: Manufacturing , Manufacturing systems , Computer programming , Design , Engineers , Flow (Dynamics) , Machine tools , Manufacturing automation , Optimization

Investigation of the Scaling Effects in Meso-Micro EDM

Umang Maradia, Konrad Wegener, Josef Stirnimann, Reto Knaak, Marco Boccadoro

IMECE 2013; V02BT02A038doi:https://doi.org/10.1115/IMECE2013-63160

Abstract

View Article

PDF

Topics: Electrical discharge machining , Erosion , Bubbles , Cavities , Ceramics , Dynamics (Mechanics) , Electrodes , Heat conduction , Machinery , Metals

Chip Breaking Parameter Selection for Constant Surface Speed Machining

Luke Berglind, John Ziegert

IMECE 2013; V02BT02A039doi:https://doi.org/10.1115/IMECE2013-63531

Abstract

View Article

PDF

Topics: Machining , Oscillations , Machinery , Computer numerical control machine tools , Damage , Finishes , Risk , Surface quality

Aspects of Fixture Clamp Modeling in Non-Rigid Variation Simulation of Sheet Metal Assemblies

Björn Lindau, Kristina Wärmefjord, Lars Lindkvist, Rikard Söderberg

IMECE 2013; V02BT02A040doi:https://doi.org/10.1115/IMECE2013-63622

Abstract

View Article

PDF

Topics: Clamps (Tools) , Friction , Manufacturing , Modeling , Sheet metal , Simulation

Numerical and Experimental Measurements of Die Swell for a LCP and an Amorphous Polymer

Arash Ahmadzadegan, Anil Saigal, Michael A. Zimmerman

IMECE 2013; V02BT02A041doi:https://doi.org/10.1115/IMECE2013-63723

Abstract

View Article

PDF

Topics: Liquid crystalline polymers , Polymers , Flow (Dynamics) , Computer simulation , Computer software , Elasticity , Extruding , Modeling , Rheology , Shear (Mechanics)

Influence of Process Parameters on the Dimensions of the Channels Prepared Using Abrasive Water Jet Machining

T. V. K. Gupta, Puneet Tandon, J. Ramkumar, Nalinaksh S. Vyas

IMECE 2013; V02BT02A042doi:https://doi.org/10.1115/IMECE2013-64063

Abstract

View Article

PDF

Topics: Dimensions , Machining , Water , Flow (Dynamics) , Particulate matter , Shapes , Erosion , Machinery , Micromachining , Milling

Optimization of Kerf Surface and Material Removal Rate Using Abrasive Water-Slurry Jet Machining Setup

Divyansh Patel, Puneet Tandon

IMECE 2013; V02BT02A043doi:https://doi.org/10.1115/IMECE2013-64245

Abstract

View Article

PDF

Topics: Flow control valves , Gelatin , Machining , Optimization , Slurries , Water

Predictive Modeling of Surface Microstructure of Hardened Steel Subject to Drilling

Ninggang Shen, Hongtao Ding, Wei Li

IMECE 2013; V02BT02A044doi:https://doi.org/10.1115/IMECE2013-64499

Abstract

View Article

PDF

Topics: Drilling , Martensitic steel , Modeling , Phase transitions

Multi-Criteria Optimization of Process Plans for Reconfigirable Manufacturing Systems: An Evolutionary Approach

Taiba Zahid, Aamer A. Baqai

IMECE 2013; V02BT02A045doi:https://doi.org/10.1115/IMECE2013-64560

Abstract

View Article

PDF

Topics: Genetic algorithms , Manufacturing systems , Optimization , Production planning

Flow Through Multi-Gate Gating System: Experimental and Simulation Studies

Renukananda Kambadahalli Halappa, Udit Chheda, Ravi Bhallamudi

IMECE 2013; V02BT02A046doi:https://doi.org/10.1115/IMECE2013-64732

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Gates (Closures) , Simulation , Metals , Water , Casting , Cavities , Computer simulation , Aluminum alloys , Computation

Comparison of Cartesian and Polar Kinematic Arrangements for Compensation of Scale Effects in Micromilling

Angela A. Sodemann, Yogesh M. Chukewad

IMECE 2013; V02BT02A047doi:https://doi.org/10.1115/IMECE2013-65002

Abstract

View Article

PDF

Topics: Kinematics , Micromilling , Errors , Chords (Trusses) , Milling , Machinery , Microscale devices , Biomedical engineering , Computer simulation , Electronics

Study of Part-Site Interactions in Microscale Capillary Self Assembly

Jose M. Carballo, Nathan B. Crane

IMECE 2013; V02BT02A048doi:https://doi.org/10.1115/IMECE2013-65177

Abstract

View Article

PDF

Topics: Microscale devices , Self-assembly , Manufacturing , Robotics , Tooling

Rectification of Piezoelectric Dynamometer Force Signals During Low Frequency Vibration Assisted Drilling

A. Sadek, M. Meshreki, M. H. Attia

IMECE 2013; V02BT02A049doi:https://doi.org/10.1115/IMECE2013-65307

Abstract

View Article

PDF

Topics: Drilling , Dynamometers , Signals , Vibration , Cutting , Transfer functions , Degrees of freedom , Dynamic models , Errors , Excitation

Relevance of Material Characterization to Manufacturing Processes

Low-Cost Chemical Sensors Based on Shrink Polymer Microfluidics

Bo Zhang, Tianhong Cui

IMECE 2013; V02BT02A050doi:https://doi.org/10.1115/IMECE2013-62634

Abstract

View Article

PDF

Topics: Microfluidics , Polymers , Sensors , Self-assembly , Graphene , Microchannels

Effect of Extrusion Parameters on Mechanical Properties of Al6061-Ni-P Coated SiC Composites

Ramesh Chinnakurli Suryanarayana, Sikhakolli Ramakrishna, Ummar Khan Attaullah, Smitha Hanumantha Badnur, Kumar Saheb

IMECE 2013; V02BT02A051doi:https://doi.org/10.1115/IMECE2013-63490

Abstract

View Article

PDF

Topics: Composite materials , Extruding , Mechanical properties , Temperature

The Effect of Build Up Edge Formation on the Machining Characteristics in Austempered Ferritic Ductile Iron

Şakir Yazman, Ahmet Akdemir, Mesut Uyaner, Barış Bakırcıoğlu

IMECE 2013; V02BT02A052doi:https://doi.org/10.1115/IMECE2013-63764

Abstract

View Article

PDF

Topics: Cutting , Machining , Nodular iron , Surface roughness , Lubricants , Stress

Mechanical and Tribological Behavior of Alumina Nano Filler Reinforced Epoxy Hybrid Composites

Gujjala Raghavendra, Shakuntala Ojha, S. K. Acharya, S. K. Pal

IMECE 2013; V02BT02A053doi:https://doi.org/10.1115/IMECE2013-64159

Abstract

View Article

PDF

Topics: Composite materials , Epoxy adhesives , Epoxy resins , Fillers (Materials) , Jute fiber , Tribology , Nanocomposites , Fibers , Bearings , Dimensions

The Relationship Between Surface Roughness and Corrosion

Alisina Toloei, Vesselin Stoilov, Derek Northwood

IMECE 2013; V02BT02A054doi:https://doi.org/10.1115/IMECE2013-65498

Abstract

View Article

PDF

Topics: Corrosion , Surface roughness , Electrochemical impedance spectroscopy , Anodes , Laser ablation , Nickel , Abrasion , Corrosion protection , Corrosion resistance , Electrochemical reactions

Investigating the Effect of Machining Parameters on Microdrilling of Titanium Grade 19 Alloy

Shivraj Yeole, Nagabhushana Ramesh Nunna, Balu Naik Banoth

IMECE 2013; V02BT02A055doi:https://doi.org/10.1115/IMECE2013-65921

Abstract

View Article

PDF

Topics: Alloys , Electrical discharge machining , Electrodes , Machining , Titanium , Wear

Robotic Machining Processes

Practical Identifiability of the Manipulator Link Stiffness Parameters

Alexandr Klimchik, Stéphane Caro, Anatol Pashkevich

IMECE 2013; V02BT02A056doi:https://doi.org/10.1115/IMECE2013-63123

Abstract

View Article

PDF

Topics: Machining , Manipulators , Modeling , Robotics , Stiffness

Event-Driven CNC Modularized Sewing Platform

Xiaohui Xie, Cui Ma, Bingzhe Han, Ruxu Du

IMECE 2013; V02BT02A057doi:https://doi.org/10.1115/IMECE2013-63533

Abstract

View Article

PDF

Topics: Computer numerical control machine tools , Control systems , Cutting , Delays , Industrial sewing machines , Machinery , Position control , Stepper motors , Thread

Skillful Operating of Working Plate to Control Ball Rolling Motion With a Dual Arm Robot

Shun Kinoshita, Toshiki Hirogaki, Eiichi Aoyama, Wei Wu

IMECE 2013; V02BT02A058doi:https://doi.org/10.1115/IMECE2013-64084

Abstract

View Article

PDF

Topics: Robots , Diamonds , Rotation , Sensors , Waves

MSIRP: Methodology for the Economic Viability of Semantic Interoperability Resolution Projects

Elsa Marcelino-Jesus, Joao Sarraipa, Mário Antão, Ricardo Jardim-Goncalves, Elisabeth Ilie-Zudor

IMECE 2013; V02BT02A059doi:https://doi.org/10.1115/IMECE2013-64868

Abstract

View Article

PDF

Topics: Resolution (Optics) , Collaboration , Economics , Internet of things , Logistics

Sustainable Interoperability of Negotiation of Manufacturing Robotic Machining Processes

Carlos Coutinho, Ricardo Jardim-Goncalves, Adina Cretan

IMECE 2013; V02BT02A060doi:https://doi.org/10.1115/IMECE2013-64891

Abstract

View Article

PDF

Topics: Machining , Manufacturing , Negotiation , Robotics , Sustainability , Aerospace industry , Columns (Structural) , Design , Machinery , Modeling

Influences of Grit Shape and Cutting Edge on Material Removal Mechanism of a Single Abrasive in Flexible Robotic Grinding

Amir Masoud Tahvilian, Henri Champliaud, Zhaoheng Liu, Bruce Hazel

IMECE 2013; V02BT02A061doi:https://doi.org/10.1115/IMECE2013-64985

Abstract

View Article

PDF

Topics: Cutting , Grinding , Robotics , Shapes , Robots , Maintenance , Blades , Control equipment , Finite element model , Hardening

Traditional Machining Processes

Surface and Subsurface Study on EDG and EDM Processing of Advanced Ceramic Composite Material

M. K. Satyarthi, Pulak M. Pandey

IMECE 2013; V02BT02A062doi:https://doi.org/10.1115/IMECE2013-62045

Abstract

View Article

PDF

Topics: Ceramic composites , Electric discharge , Electrical discharge machining , Fracture (Materials) , Grinding

Drilling Performance of Carbon Fiber Reinforced Epoxy Composite When Machined Dry, With Conventional Cutting Fluid and With a Cryogenically Cooled Tool

Stuart Barnes, Pipat Bhudwannachai, Aishah Najiah Dahnel

IMECE 2013; V02BT02A063doi:https://doi.org/10.1115/IMECE2013-62246

Abstract

View Article

PDF

Topics: Carbon fibers , Composite materials , Cutting , Drilling , Epoxy adhesives , Epoxy resins , Fluids , Damage , Drills (Tools) , Machining

Performance of Lasered PCD- and CVD-Diamond Cutting Inserts for Machining Carbon Fiber Reinforced Plastics (CFRP)

M. Henerichs, C. Dold, R. Voß, K. Wegener

IMECE 2013; V02BT02A064doi:https://doi.org/10.1115/IMECE2013-62675

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Cutting , Machining , Synthetic diamonds , Diamonds , Fibers , Lasers , Wear resistance , Chemical vapor deposition , Surface roughness

Machining of Non-Axisymmetric Curved Surface by Lathe Turning

Yoshitaka Morimoto, Katsuhiro Nakagaki, Hideharu Kato

IMECE 2013; V02BT02A065doi:https://doi.org/10.1115/IMECE2013-63317

Abstract

View Article

PDF

Topics: Machining , Turning , Milling , Cams , Computer numerical control machine tools , Grinding , Grinding equipment , Grinding wheels , Linear motors , Machinery

Microscopic Tool Wear in Machining Aluminum 6061 T6 (Cold Compressed Air, Nitrogen and Dry Environments

Vishnu Vardhan Chandrasekaran, Lewis N. Payton

IMECE 2013; V02BT02A066doi:https://doi.org/10.1115/IMECE2013-63731

Abstract

View Article

PDF

Topics: Aluminum , Compressed air , Cutting , Finishes , Machining , Nitrogen , Wear

Evaluation of Forces, Tool Wear and Surface Finish During Orthogonal Machining AISI 1020 Steel in Three Cutting Environments

Vishnu Vardhan Chandrasekaran, Lewis N. Payton

IMECE 2013; V02BT02A067doi:https://doi.org/10.1115/IMECE2013-63777

Abstract

View Article

PDF

Topics: Cutting , Finishes , Machining , Steel , Wear

Comparison Orthogonal Tube Turning Data Versus Finite Element Simulation Using LS Dyna

Vishnu Vardhan Chandrasekaran, Lewis N. Payton

IMECE 2013; V02BT02A068doi:https://doi.org/10.1115/IMECE2013-63803

Abstract

View Article

PDF

Topics: Finite element analysis , Metal cutting , Simulation , Turning

3D Numerical Investigation of Thermally Assisted High Efficiency Ductile Machining of Brittle Materials

J. Ma, Nathan Pelate, Shuting Lei

IMECE 2013; V02BT02A069doi:https://doi.org/10.1115/IMECE2013-63827

Abstract

View Article

PDF

Topics: Brittleness , Finite element methods , Finite element model , Machining , Simulation

Assessment of Microgrooved Cutting Tool in Dry Machining of AISI 1045 Steel: A Numerical Study

J. Ma, Hung Duong, Yunsong Lian, Shuting Lei

IMECE 2013; V02BT02A070doi:https://doi.org/10.1115/IMECE2013-63842

Abstract

View Article

PDF

Topics: Cutting tools , Machining , Steel , Cutting , Thrust , Finite element analysis , Simulation , Tungsten

A Preliminary Study on Machinability Assessment of Nanobainite Steel

Ashwin Polishetty, Guy Littlefair, Thomas Musselwhite, Chinmay Sonavane

IMECE 2013; V02BT02A071doi:https://doi.org/10.1115/IMECE2013-64004

Abstract

View Article

PDF

Topics: Machinability , Steel , Cutting , Milling , Carbon , Coolants , Cooling , Experimental design , Ferrites (Magnetic materials) , Heat treating (Metalworking)

Fabrication of Complex Micro Channels by Micro Electric Discharge Milling (µ-ED Milling)

Vaibhav Shukla, Syed Nadeem Akhtar, S. Kanmani Subbu, J. Ramkumar

IMECE 2013; V02BT02A072doi:https://doi.org/10.1115/IMECE2013-64031

Abstract

View Article

PDF

Topics: Electric discharge , Manufacturing , Microchannels , Milling

Performance Evaluation on Cryogenic Cooling of Electrode in Electrical Discharge Machining in AISI D2 Steel

M. Pradeep Kumar, S. Vinoth Kumar

IMECE 2013; V02BT02A073doi:https://doi.org/10.1115/IMECE2013-64133

Abstract

View Article

PDF

Topics: Cooling , Electrical discharge machining , Electrodes , Performance evaluation , Steel , Surface roughness

Acoustic Emission Based Tool Wear Condition Monitoring While Turning Nimonic C-263 Alloy Using PVD Coated Carbide Insert

V. S. Senthil Kumar, C. Ezilarasan, A. Velayudham

IMECE 2013; V02BT02A074doi:https://doi.org/10.1115/IMECE2013-64246

Abstract

View Article

PDF

Topics: Acoustic emissions , Alloys , Condition monitoring , Turning , Wear , Cutting , Abrasion , Acoustics , Combustion chambers , Creep

Finite Element Analysis and Study of Tool Wear in Machining With Coated Tools

Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala

IMECE 2013; V02BT02A075doi:https://doi.org/10.1115/IMECE2013-64342

Abstract

View Article

PDF

Topics: Coatings , Finite element analysis , Lubricants , Machining , Wear

New Kinematic in Dressing of Grinding Wheels

T. Tawakoli, A. Daneshi

IMECE 2013; V02BT02A076doi:https://doi.org/10.1115/IMECE2013-64362

Abstract

View Article

PDF

Topics: Grinding , Grinding wheels , Kinematics , Wheels , Rollers , Diamonds , Manufacturing , Surface roughness

Model-Based Simulation and Optimization of Cutting Operations in Sheet Metal Working

G. M. Dhote, A. V. Kale

IMECE 2013; V02BT02A077doi:https://doi.org/10.1115/IMECE2013-64493

Abstract

View Article

PDF

Topics: Cutting , Optimization , Sheet metal work , Simulation

Experimental Characterization and Multi-Objective Optimization of the Orbital Drilling Process of CFRP

A. Sadek, A. O. Nassef, M. Meshreki, M. H. Attia

IMECE 2013; V02BT02A078doi:https://doi.org/10.1115/IMECE2013-65311

Abstract

View Article

PDF

Topics: Carbon reinforced plastics , Drilling , Experimental characterization , Pareto optimization , Cutting , Delamination , Temperature , Laminates , Aerospace industry , Algorithms

On Sustainability Assesment of Machining Processes

Syed Waqar Raza, Ibrahim Mostafa Deiab

IMECE 2013; V02BT02A079doi:https://doi.org/10.1115/IMECE2013-65710

Abstract

View Article

PDF

Topics: Machining , Sustainability , Energy consumption , Manufacturing , Energy sustainability , Engineers , Machinery , Manufacturing systems , Milling , Process design