Skip Nav Destination

Proceedings Papers

Select Year

Select Volume

Volume 2A: Advanced Manufacturing

Advanced Manufacturing

Additive Manufacturing

Radiometric and Metallurgical Analysis of Zone Formation in Elementary Laser Deposited Thin-Wall Structures

Joshua J. Hammell, Michael A. Langerman, Nathan P. Saunders

IMECE 2013; V02AT02A001https://doi.org/10.1115/IMECE2013-62142

Abstract

View Articletitled, Radiometric and Metallurgical Analysis of Zone Formation in Elementary Laser Deposited Thin-Wall Structures

PDF

Topics: Lasers , Metallurgical analysis , Thin wall structures , Additive manufacturing , ASTM International , Industrial research , Inspection , Machining , Maintenance , Manufacturing

A Numerical Study of a Molten Aluminum for Investment Casting of 3D Cellular Metals

Jiwon Mun, Jaehyung Ju, Byoung-Gwan Yun, Byung-Moon Chang, Doo-Man Kim

IMECE 2013; V02AT02A002https://doi.org/10.1115/IMECE2013-62847

Abstract

View Articletitled, A Numerical Study of a Molten Aluminum for Investment Casting of 3D Cellular Metals

PDF

Topics: Aluminum , Flow (Dynamics) , Investment casting (Process) , Investment castings , Metals , Solidification , Temperature , Viscosity

Experimental Investigation on Electro-Discharge Deposition Process

B. Muralidharan, H. Chelladurai, J. Ramkumar

IMECE 2013; V02AT02A003https://doi.org/10.1115/IMECE2013-62866

Abstract

View Articletitled, Experimental Investigation on Electro-Discharge Deposition Process

PDF

Topics: Additive manufacturing , Anodes , Composite materials , Cycles , Cylinders , Design , Electrodes , Micromanufacturing

Hybrid Additive Manufacturing of 3D Compliant Tactile Sensors

Morteza Vatani, Erik D. Engeberg, Jae-Won Choi

IMECE 2013; V02AT02A004https://doi.org/10.1115/IMECE2013-63064

Abstract

View Articletitled, Hybrid Additive Manufacturing of 3D Compliant Tactile Sensors

PDF

Topics: Additive manufacturing , Tactile sensors , Sensors , Manufacturing , Dimensions , Electrical conductivity , Electronics , Multi-walled carbon nanotubes , Multi-walled nanotubes , Printing

Development of Direct Printing/Curing Process for 3D Structural Electronics

Yanfeng Lu, Morteza Vatani, Ho-Chan Kim, Rae-Chan Lee, Jae-Won Choi

IMECE 2013; V02AT02A005https://doi.org/10.1115/IMECE2013-63068

Abstract

View Articletitled, Development of Direct Printing/Curing Process for 3D Structural Electronics

PDF

Topics: Electronics , Hardening (Curing) , Printing , Wire , Manufacturing , Design , Carbon nanotubes , Circuits , Electrical components , Engineering prototypes

G-Code Generation for a New Printing Process Based on 3D Plastic Polymer Droplet Generation

Johannes Schwaiger, Tim C. Lueth, Franz Irlinger

IMECE 2013; V02AT02A006https://doi.org/10.1115/IMECE2013-63152

Abstract

View Articletitled, G-Code Generation for a New Printing Process Based on 3D Plastic Polymer Droplet Generation

PDF

Topics: Drops , Polymers , Printing , Manufacturing , Machinery , Additive manufacturing , Algorithms , Engineering prototypes , Generators , Geometry

Manufacturing Additively, With Fresh Concrete

Tony Di Carlo, Behrokh Khoshnevis, Yong Chen

IMECE 2013; V02AT02A007https://doi.org/10.1115/IMECE2013-63996

Abstract

View Articletitled, Manufacturing Additively, With Fresh Concrete

PDF

Topics: Concretes , Manufacturing , Bearings , Stress , Additive manufacturing , Exoskeleton devices , Construction , Polymers , Shapes

Experimental Investigation of Selective Laser Melting of Lunar Regolith for In-Situ Applications

Miranda Fateri, Andreas Gebhardt, Maziar Khosravi

IMECE 2013; V02AT02A008https://doi.org/10.1115/IMECE2013-64334

Abstract

View Articletitled, Experimental Investigation of Selective Laser Melting of Lunar Regolith for In-Situ Applications

PDF

Topics: Lasers , Melting , Manufacturing , Construction , Additive manufacturing , Ceramics , Laser beams , Metals , Transportation systems

Friction Coefficients and Surface Properties for Laser Sintered Parts

Daniel B. Roppenecker, Rebecca Grazek, Johannes A. Coy, Franz Irlinger, Tim C. Lueth

IMECE 2013; V02AT02A009https://doi.org/10.1115/IMECE2013-64549

Abstract

View Articletitled, Friction Coefficients and Surface Properties for Laser Sintered Parts

PDF

Topics: Friction , Lasers , Manufacturing , Sintering , Surface properties , Tribology

A Novel Additive Manufacturing File Format for Printed Electronics

Neeraj Panhalkar, Ratnadeep Paul, Sam Anand

IMECE 2013; V02AT02A010https://doi.org/10.1115/IMECE2013-64678

Abstract

View Articletitled, A Novel Additive Manufacturing File Format for Printed Electronics

PDF

Topics: Additive manufacturing , Electronics , Electronic components , Manufacturing , Algorithms , Computer-aided design , Machinery , Capacitors , Geometry , Glass

Flexural Modulus of Lasersintered PA 2200

Johannes A. Coy, Clara-Maria Kuball, Daniel B. Roppenecker, Tim C. Lueth

IMECE 2013; V02AT02A011https://doi.org/10.1115/IMECE2013-64696

Abstract

View Articletitled, Flexural Modulus of Lasersintered PA 2200

PDF

Topics: Additive manufacturing , Biocompatible polymers , Biomedicine , Cycles , Design , Engineers , Grippers , Hinges , Lasers , Manufacturing

Advances in Direct Metal Deposition

Jyoti Mazumder, Lijun Song

IMECE 2013; V02AT02A012https://doi.org/10.1115/IMECE2013-65042

Abstract

View Articletitled, Advances in Direct Metal Deposition

PDF

Topics: Metals , Sensors , Additive manufacturing , Cycles , Temperature , Computer-aided design , Cooling , Design , Dimensions , Energy consumption

Build Direction for 3D Heterogeneous Object in Additive Manufacturing

AKM B. Khoda

IMECE 2013; V02AT02A013https://doi.org/10.1115/IMECE2013-65253

Abstract

View Articletitled, Build Direction for 3D Heterogeneous Object in Additive Manufacturing

PDF

Topics: Additive manufacturing , Algorithms , Design , Finishes

Complex Sparse-Filled Mechanical Property Prediction Methods for Direct Digital Manufacturing

David N. Kordonowy, Sydney A. Giblin

IMECE 2013; V02AT02A014https://doi.org/10.1115/IMECE2013-65426

Abstract

View Articletitled, Complex Sparse-Filled Mechanical Property Prediction Methods for Direct Digital Manufacturing

PDF

Topics: Manufacturing , Mechanical properties , Additive manufacturing , Design , Aircraft , Cycles , Emissions , Flexible manufacturing systems , Fuels , NASA

Precision and Energy Usage for Additive Manufacturing

Lee Clemon, Anton Sudradjat, Maribel Jaquez, Aditya Krishna, Marwan Rammah, David Dornfeld

IMECE 2013; V02AT02A015https://doi.org/10.1115/IMECE2013-65688

Abstract

View Articletitled, Precision and Energy Usage for Additive Manufacturing

PDF

Topics: Additive manufacturing , Energy consumption , Machinery , Design , Manufacturing , Printing , Resolution (Optics) , Decision making , Density , Manufacturing tools

An Origami Inspired Additive Manufacturing Process for Building Thin-Shell Structures

Dongping Deng, Yong Chen

IMECE 2013; V02AT02A016https://doi.org/10.1115/IMECE2013-65720

Abstract

View Articletitled, An Origami Inspired Additive Manufacturing Process for Building Thin-Shell Structures

PDF

Topics: Additive manufacturing , Manufacturing , Origami-inspired design , Thin shells

A Design-of-Experiments Approach to Study Thermal Property Effects on Melt Pool Geometry in Powder-Based EBAM

Bo Cheng, Kevin Chou

IMECE 2013; V02AT02A017https://doi.org/10.1115/IMECE2013-66009

Abstract

View Articletitled, A Design-of-Experiments Approach to Study Thermal Property Effects on Melt Pool Geometry in Powder-Based EBAM

PDF

Topics: Additive manufacturing , Cathode ray oscilloscopes , Electron beams , Experimental design , Geometry , Thermal properties

Shape Deviation Modeling for Dimensional Quality Control in Additive Manufacturing

Lijuan Xu, Qiang Huang, Arman Sabbaghi, Tirthankar Dasgupta

IMECE 2013; V02AT02A018https://doi.org/10.1115/IMECE2013-66329

Abstract

View Articletitled, Shape Deviation Modeling for Dimensional Quality Control in Additive Manufacturing

PDF

Topics: Additive manufacturing , Modeling , Quality control , Shapes , Cylinders , Machine tools , Manufacturing , Manufacturing technology , Mask image projection stereolithography , Physics

Advanced Forming

Investigations on the Effect of Coating Material and Method on Die Wear in Stamping of Advanced High Strength Steels

Ömer Necati Cora, Muammer Koç, Peter J. Blau, Kunio Namiki

IMECE 2013; V02AT02A019https://doi.org/10.1115/IMECE2013-62043

Abstract

View Articletitled, Investigations on the Effect of Coating Material and Method on Die Wear in Stamping of Advanced High Strength Steels

PDF

Topics: Coatings , High strength steel , Metal stamping , Wear , Blanks , Chemical vapor deposition , Cylinders , Delays , Fracture toughness , Metalworking industry

Arithmetic and Experimental Study of Fix-Length Compensation Based on Conical Bottom Shape of Electrode in Micro-EDM

Jingyu Pei, Bowen Zheng, Lei He, Fangjin Jin

IMECE 2013; V02AT02A020https://doi.org/10.1115/IMECE2013-62458

Abstract

View Articletitled, Arithmetic and Experimental Study of Fix-Length Compensation Based on Conical Bottom Shape of Electrode in Micro-EDM

PDF

Topics: Electrical discharge machining , Electrodes , Shapes , Machining , Milling , Wear , Cavities

A Control System Design for Efficiently Operating Free-Motion of Servo Mechanical Press

Pin-Jyun Chen, Pi-Ying Cheng, Yu-Ting Lin, Tseng-Jen Cheng

IMECE 2013; V02AT02A021https://doi.org/10.1115/IMECE2013-62582

Abstract

View Articletitled, A Control System Design for Efficiently Operating Free-Motion of Servo Mechanical Press

PDF

Topics: Control systems , Design , Servomechanism presses , Control equipment , Servomotors , B-splines , Curve fitting , Graphical user interfaces , Metals

The Experimental Study on Forming Accuracy for Water Jet Incremental Sheet Metal Forming

Kai He, Jiuhua Li, Shuguo Wei, Ruxu Du

IMECE 2013; V02AT02A022https://doi.org/10.1115/IMECE2013-62892

Abstract

View Articletitled, The Experimental Study on Forming Accuracy for Water Jet Incremental Sheet Metal Forming

PDF

Topics: Sheet metal work , Water , Deformation , Coordinate measuring machines , Geometry , Pressure , Sheet metal

Effect of Process Parameters on the Microstructure Homogeneity of AA6082 Aluminum Alloy Deformed by Twist Extrusion

V. S. Senthil Kumar, U. Mohammed Iqbal

IMECE 2013; V02AT02A023https://doi.org/10.1115/IMECE2013-63075

Abstract

View Articletitled, Effect of Process Parameters on the Microstructure Homogeneity of AA6082 Aluminum Alloy Deformed by Twist Extrusion

PDF

Topics: Aluminum alloys , Deformation , Extruding , Finite element analysis

Temperature-Supported Forming of Automobile Related Magnesium Components

Frank Schieck, Welf-Guntram Drossel, Hans Bräunlich, Sören Scheffler, Norbert Pierschel

IMECE 2013; V02AT02A024https://doi.org/10.1115/IMECE2013-63175

Abstract

View Articletitled, Temperature-Supported Forming of Automobile Related Magnesium Components

PDF

Topics: Automobiles , Magnesium (Metal) , Temperature , Blanks , Design , Steel , Aluminum , Construction , Corrosion , Energy consumption

The Evaluation of Friction Behavior Between EG and EGA Coated Automotive Steels

Hua-Chu Shih, Michele L. Vanfleteren

IMECE 2013; V02AT02A025https://doi.org/10.1115/IMECE2013-63213

Abstract

View Articletitled, The Evaluation of Friction Behavior Between EG and EGA Coated Automotive Steels

PDF

Topics: Friction , Steel , Steel sheet , Lubricants , Sheet metal , Alloys , Coatings , Corrosion protection , Iron , Pressure

Using Pyramidal Three-Roll Bending Process to Improve the Quality of Seamed Cylinders

Zhengkun Feng, Henri Champliaud

IMECE 2013; V02AT02A026https://doi.org/10.1115/IMECE2013-63294

Abstract

View Articletitled, Using Pyramidal Three-Roll Bending Process to Improve the Quality of Seamed Cylinders

PDF

Topics: Computer simulation , Cylinders , Welding , Computer software , Design , Finite element analysis , Optimization , Stress

Measurements of Wall Formation Forces in an Acoustic Resonator

Natasha L. Barbely, Sorin I. Pirau, Narayanan M. Komerath

IMECE 2013; V02AT02A027https://doi.org/10.1115/IMECE2013-63307

Abstract

View Articletitled, Measurements of Wall Formation Forces in an Acoustic Resonator

PDF

Topics: Acoustics , Particulate matter , Finite element analysis , Radiation (Physics) , Computation , Drag (Fluid dynamics) , Fluids , Force measurement , Lasers , Shapes

Experimental Study on Electromagnetic Forming of Copper Sheets

Shanmuga Sundaram Karibeeran, Rajiv Selvam

IMECE 2013; V02AT02A028https://doi.org/10.1115/IMECE2013-63433

Abstract

View Articletitled, Experimental Study on Electromagnetic Forming of Copper Sheets

PDF

Topics: Copper

Optimization of Process Parameters in Profile Forming of Al 3003(O) Aluminium Alloy

V. S. Senthil Kumar, S. P. Shanmugnatan

IMECE 2013; V02AT02A029https://doi.org/10.1115/IMECE2013-63435

Abstract

View Articletitled, Optimization of Process Parameters in Profile Forming of Al 3003(O) Aluminium Alloy

PDF

Topics: Aluminum , Aluminum alloys , Computer numerical control machine tools , Computers , Experimental design , Finishes , Forming techniques , Machinery , Manufacturing , Momentum

Precision Measurement and Control of Synchronization Errors in a Contact-Type Printing Machine for Fine Pattern Printing and Overlay Improvement

Dongwoo Kang, Taik-Min Lee, Youngman Choi, Seung-Hyun Lee, Dukkyun Yoon, Inyoung Kim, Jeongdai Jo

IMECE 2013; V02AT02A030https://doi.org/10.1115/IMECE2013-64408

Abstract

View Articletitled, Precision Measurement and Control of Synchronization Errors in a Contact-Type Printing Machine for Fine Pattern Printing and Overlay Improvement

PDF

Topics: Errors , Machinery , Overlays (Materials engineering) , Printing , Synchronization , Inks , Mass production

Characterization of Delamination in Laser Micro Transfer Printing

Ala’a Al-okaily, Placid Ferreira

IMECE 2013; V02AT02A031https://doi.org/10.1115/IMECE2013-64668

Abstract

View Articletitled, Characterization of Delamination in Laser Micro Transfer Printing

PDF

Topics: Delamination , Lasers , Printing , Inks , Absorption , Dimensions , Finite element methods , Finite element model , Laser beams , Manufacturing

Experimental Validation of Analytical Model for Electromagnetic Forming Using a Uniform Pressure Actuator

E. Thibaudeau, B. L. Kinsey

IMECE 2013; V02AT02A032https://doi.org/10.1115/IMECE2013-65903

Abstract

View Articletitled, Experimental Validation of Analytical Model for Electromagnetic Forming Using a Uniform Pressure Actuator

PDF

Topics: Actuators , Pressure , Welding , Manufacturing , Materials properties , Aluminum , Capacitors , Cracking (Materials) , Eddies (Fluid dynamics) , Fracture (Process)

An Interferometer Based Experimental Technique to Evaluate Large Strains and Springback on Sheet Metal

Luis Rafael Sanchez, Shannon Peterson, Carl G. Simonsen, Abrar Satar

IMECE 2013; V02AT02A033https://doi.org/10.1115/IMECE2013-66373

Abstract

View Articletitled, An Interferometer Based Experimental Technique to Evaluate Large Strains and Springback on Sheet Metal

PDF

Topics: Interferometers , Sheet metal , Algorithms , Alloy steel , Aluminum , Computer software , Interferometry , Strain gages

Additive Manufacturing of Conformable Electronics on Complex Objects Through Combined Use of Liquid Metal Ink and Packaging Material

Qin Zhang, Jing Liu

IMECE 2013; V02AT02A034https://doi.org/10.1115/IMECE2013-66607

Abstract

View Articletitled, Additive Manufacturing of Conformable Electronics on Complex Objects Through Combined Use of Liquid Metal Ink and Packaging Material

PDF

Topics: Additive manufacturing , Electronics , Inks , Liquid metals , Packaging , Cycles , Manufacturing , Wire , Circuits , Electrical properties

Advanced Materials Design, Synthesis, and Processing

Precipitation of Nano-Sized Z-Phase in HR3C Austenitic Heat Resistant Steel

Fengshi Yin, Zhen Xu, Bing Xue, Li Zhou, Xuebo Jiang

IMECE 2013; V02AT02A035https://doi.org/10.1115/IMECE2013-62075

Abstract

View Articletitled, Precipitation of Nano-Sized Z-Phase in HR3C Austenitic Heat Resistant Steel

PDF

Topics: Precipitation , Specialty steels , Temperature , Cooling , Dislocation density , Grain boundaries , Heat treating (Metalworking) , Particulate matter , Steel , Water

Production of Ultra-Fine-Grained Aluminum Plates by Constrained Groove Pressing Technique

Hadi Miyanaji, Ali Keshavarz Panahi, Ramin Hajavifard

IMECE 2013; V02AT02A036https://doi.org/10.1115/IMECE2013-62201

Abstract

View Articletitled, Production of Ultra-Fine-Grained Aluminum Plates by Constrained Groove Pressing Technique

PDF

Topics: Aluminum plate , Deformation , Mechanical properties , Pressing

Carbon Fiber Composite Materials in Modern Day Automotive Production Lines: A Case Study

Håkan Petersson, Damien Motte, Robert Bjärnemo

IMECE 2013; V02AT02A037https://doi.org/10.1115/IMECE2013-62272

Abstract

View Articletitled, Carbon Fiber Composite Materials in Modern Day Automotive Production Lines: A Case Study

PDF

Topics: Assembly lines , Carbon fibers , Composite materials , Design , Carbon composites , Automotive industry , Production equipment , Ergonomics , Materials properties , Steel

Structure and Property of Sub-Zero Processed Cold Work Die Steel

Debdulal Das, Kalyan K. Ray, Apurba K. Dutta

IMECE 2013; V02AT02A038https://doi.org/10.1115/IMECE2013-63102

Abstract

View Articletitled, Structure and Property of Sub-Zero Processed Cold Work Die Steel

PDF

Topics: Steel , Tool steel , Cycles , Mechanical properties , Fracture toughness , Hardening , Heat treating (Metalworking) , Particulate matter , Temperature , Wear resistance

Evaluation of Metal Wire Network ‘Kana-ami’ Structure Between Expert and Non-Expert

Zelong Wang, Atsushi Endo, Tetsushi Koshino, Toru Tsuji, Ken-ichi Tsuji

IMECE 2013; V02AT02A039https://doi.org/10.1115/IMECE2013-63456

Abstract

View Articletitled, Evaluation of Metal Wire Network ‘Kana-ami’ Structure Between Expert and Non-Expert

PDF

Topics: Metals , Wire , Manufacturing , Finishes , Pollution , Shapes , Workshops (Work spaces)

Effect of Laser Peening on Steel and Titanium Alloy for Power Applications

Bharat K. Pant, Raghu V. Prakash, M. Kamaraj

IMECE 2013; V02AT02A040https://doi.org/10.1115/IMECE2013-63589

Abstract

View Articletitled, Effect of Laser Peening on Steel and Titanium Alloy for Power Applications

PDF

Topics: Blades , Laser hardening , Shot peening , Steel , Titanium alloys

Microstructural Response of High Aluminum Steels to Quenching and Partitioning Treatment

Tuomo Nyyssönen, Mahesh Somani, Pasi Peura, Veli-Tapani Kuokkala

IMECE 2013; V02AT02A041https://doi.org/10.1115/IMECE2013-63735

Abstract

View Articletitled, Microstructural Response of High Aluminum Steels to Quenching and Partitioning Treatment

PDF

Topics: Aluminum , Quenching (Metalworking) , Steel , Ductility , Precipitation , Quadratic programming , Temperature , Tensile testing , Atoms , Bearings

Effect of Severe Hot Forging and Rolling on Microstructure, Texture and Tensile Properties of Titanium Metastable Beta-Alloys

Orest Ivasishin, Pavlo Markovsky, Marta Pozuelo, Sergey V. Prikhodko

IMECE 2013; V02AT02A042https://doi.org/10.1115/IMECE2013-63767

Abstract

View Articletitled, Effect of Severe Hot Forging and Rolling on Microstructure, Texture and Tensile Properties of Titanium Metastable Beta-Alloys

PDF

Topics: Alloys , Forging , Tensile strength , Texture (Materials) , Titanium , Titanium alloys

Formation and Characterization of Co-Continuous Shear Thickening Fluid/Polymer Blends

Yifeng Hong, Donggang Yao

IMECE 2013; V02AT02A043https://doi.org/10.1115/IMECE2013-63828

Abstract

View Articletitled, Formation and Characterization of Co-Continuous Shear Thickening Fluid/Polymer Blends

PDF

Topics: Fluids , Polymer blends , Shear (Mechanics) , Polymers , Damping , Chemical properties , Melt processing , Non-Newtonian fluids , Raw materials , Rheology

Influence of Refiner Aluminum Titanium Boride on the ZA Alloys Processed Through Centrifugal Casting

Pathipati Naga Jyothi, Agari Shailesh Rao, Jagath Mandyakoppal Chowdiah, Korrapati Channakeshavalu

IMECE 2013; V02AT02A044https://doi.org/10.1115/IMECE2013-64141

Abstract

View Articletitled, Influence of Refiner Aluminum Titanium Boride on the ZA Alloys Processed Through Centrifugal Casting

PDF

Topics: Alloys , Aluminum , Casting , Titanium , Mechanical properties , Cylinders , Rotation , Solidification

Mechanical Property of CFRP by Carbon Spray Up Method

Tetsuo Kikuchi, Akira Fudauchi, Tetsushi Koshino, Chieko Narita, Atsushi Endo, Yuka Takai, Akihiko Goto, Akio Ohtani, Asami Nakai, Hiroyuki Hamada

IMECE 2013; V02AT02A045https://doi.org/10.1115/IMECE2013-64144

Abstract

View Articletitled, Mechanical Property of CFRP by Carbon Spray Up Method

PDF

Topics: Carbon , Carbon reinforced plastics , Mechanical properties , Sprays , Composite materials , Molding , Cutting , Fibers , Resins , Design

Electrical Discharge Machining of SiC and Gr Reinforced 6061-T6 Aluminum Alloy Hybrid Composite Fabricated by Friction Stir Processing

Murahari Kolli, Devaraj Aruri, Kumar Adepu

IMECE 2013; V02AT02A046https://doi.org/10.1115/IMECE2013-64161

Abstract

View Articletitled, Electrical Discharge Machining of SiC and Gr Reinforced 6061-T6 Aluminum Alloy Hybrid Composite Fabricated by Friction Stir Processing

PDF

Topics: Aluminum alloys , Composite materials , Electrical discharge machining , Friction , Machining , Advanced materials , Aerospace industry , Aluminum , Automobiles , Copper

Development of Magnetic Polishing for Micro Channel With a Ball-Nose-Shaped Tool

Yusuke Takebayashi, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, Shreyes N. Melkote

IMECE 2013; V02AT02A047https://doi.org/10.1115/IMECE2013-64163

Abstract

View Articletitled, Development of Magnetic Polishing for Micro Channel With a Ball-Nose-Shaped Tool

PDF

Topics: Microchannels , Polishing , Machine tools , Engineering prototypes , Biomedicine , Cast iron , Finishes , Machinery , Manufacturing , Microelectromechanical systems

Slurry Erosive Wear Behavior of Forged Al6061-CeO₂-TiO₂ Hybrid Composites

Ramesh Chinnakurli Suryanarayana, Ummar Khan Attaullah, Kumar Saheb, Apoorva Kumar, Manoj Kumar Rajput

IMECE 2013; V02AT02A048https://doi.org/10.1115/IMECE2013-64402

Abstract

View Articletitled, Slurry Erosive Wear Behavior of Forged Al6061-CeO2-TiO2 Hybrid Composites

PDF

Topics: Composite materials , Slurries , Wear , Aluminum alloys , Corrosion protection , Aluminum , Blades , Extruding , Alloys , Anodizing

Dimensional and Internal Structural Design for Braided Fabric Reinforced Thermoplastic Composite

Takeshi Saito, Ryo Morimoto, Masaru Imamura, Akio Ohtani, Asami Nakai

IMECE 2013; V02AT02A049https://doi.org/10.1115/IMECE2013-64416

Abstract

View Articletitled, Dimensional and Internal Structural Design for Braided Fabric Reinforced Thermoplastic Composite

PDF

Topics: Structural design , Textiles , Thermoplastic composites , Resins , Yarns , Composite materials , Heat , Molding , Fibers , Pressure

Tribological Behaviour of Hot Extruded Al6061-Si₃N₄ Composite

Ramesh Chinnakurli Suryanarayana, Saleem Khan, Praveennath G. Koppad, Zulfiqar Khan

IMECE 2013; V02AT02A050https://doi.org/10.1115/IMECE2013-64459

Abstract

View Articletitled, Tribological Behaviour of Hot Extruded Al6061-Si3N4 Composite

PDF

Topics: Composite materials , Extruding , Tribology , Wear , Silicon nitride ceramics , Friction , Alloys , Casting , Metal matrix composites , Aluminum

Wear and Mechanical Properties of Aluminum Alloy Based Hybrid Composites [(SiC+Gr) and (SiC+Al₂O₃)] Fabricated by Friction Stir Processing

A. Kumar, A. Devaraju, B. Kotiveerachari

IMECE 2013; V02AT02A051https://doi.org/10.1115/IMECE2013-64734

Abstract

View Articletitled, Wear and Mechanical Properties of Aluminum Alloy Based Hybrid Composites [(SiC+Gr) and (SiC+Al2O3)] Fabricated by Friction Stir Processing

PDF

Topics: Aluminum alloys , Composite materials , Friction , Mechanical properties , Microhardness , Wear

Processing and Analysis of Ceramic Mesoscale Combustors Fabricated by Co-Extrusion

Khurshida Sharmin, Ingmar Schoegl

IMECE 2013; V02AT02A052https://doi.org/10.1115/IMECE2013-64866

Abstract

View Articletitled, Processing and Analysis of Ceramic Mesoscale Combustors Fabricated by Co-Extrusion

PDF

Topics: Binders (Materials) , Ceramics , Combustion chambers , Extruding

Growth and Characterization of Titanium Nitride Nanowires on Silicon Substrate Using Pulsed Laser Deposition Method for Biological Applications

Seyram Gbordzoe, K. Mensah-Darkwa, Ram Gupta, Dhananjay Kumar

IMECE 2013; V02AT02A053https://doi.org/10.1115/IMECE2013-64883

Abstract

View Articletitled, Growth and Characterization of Titanium Nitride Nanowires on Silicon Substrate Using Pulsed Laser Deposition Method for Biological Applications

PDF

Topics: Nanowires , Pulsed laser deposition , Silicon , Titanium

Creation and Characterization of Doped Hydroxyapatite With Strontium Carbonate Thin Film Coating on Titanium Substrates Using Pulse Laser Deposition for Biological Applications

Cindy Waters, Stephen Ajinola, Dhannajay Kumar, Kwadwo-mensah Darkwa, Ahmadreza Sedighi

IMECE 2013; V02AT02A054https://doi.org/10.1115/IMECE2013-64924

Abstract

View Articletitled, Creation and Characterization of Doped Hydroxyapatite With Strontium Carbonate Thin Film Coating on Titanium Substrates Using Pulse Laser Deposition for Biological Applications

PDF

Topics: Coating processes , Coatings , Pulsed laser deposition , Strontium , Thin films , Titanium

Design and Construction of a Membrane Analysis System for Fuel Cell Humidification Applications

Russell Borduin, Wei Li

IMECE 2013; V02AT02A055https://doi.org/10.1115/IMECE2013-65233

Abstract

View Articletitled, Design and Construction of a Membrane Analysis System for Fuel Cell Humidification Applications

PDF

Topics: Construction , Design , Fuel cells , Membranes , Water , Proton exchange membranes , Air flow , Flow (Dynamics) , Mass transfer , Measurement systems

Modeling and Fabrication of Heterogeneous Three-Dimensional Objects Based on Additive Manufacturing

Pu Huang, Dongping Deng, Yong Chen

IMECE 2013; V02AT02A056https://doi.org/10.1115/IMECE2013-65724

Abstract

View Articletitled, Modeling and Fabrication of Heterogeneous Three-Dimensional Objects Based on Additive Manufacturing

PDF

Topics: Additive manufacturing , Design , Manufacturing , Modeling , Production planning , Stereolithography , Mask image projection stereolithography , Hardware

Experimental Investigation of Manufacturing Possibility of Multilayered Ni-ZrO₂ System Functionally Graded Material by Powder Injection Molding

Ryosuke Suzuki, Masaaki Matsubara, Takumi Maruyama, Kenji Sakamoto, Kazuyuki Arakawa

IMECE 2013; V02AT02A057https://doi.org/10.1115/IMECE2013-66233

Abstract

View Articletitled, Experimental Investigation of Manufacturing Possibility of Multilayered Ni-ZrO2 System Functionally Graded Material by Powder Injection Molding

PDF

Topics: Functionally graded materials , Injection molding , Manufacturing , Temperature , Binders (Materials) , Compressive stress , Thermal stresses , Ceramics , Compressive strength , Melting point

Advancing Sensing, Measurement, and Process Control in Manufacturing

A Framework for In-Line Milling Process Optimisation

Paolo Bosetti, Carlos Maximiliano Giorgio Bort

IMECE 2013; V02AT02A058https://doi.org/10.1115/IMECE2013-62240

Abstract

View Articletitled, A Framework for In-Line Milling Process Optimisation

PDF

Topics: Milling , Optimization , Control equipment , Machine tools , Machining , Optimization algorithms , Software architecture

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Xiaoyan Cao, Bin Lin, Yan Wang, Shaolei Wang

IMECE 2013; V02AT02A059https://doi.org/10.1115/IMECE2013-62366

Abstract

View Articletitled, A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

PDF

Topics: Grinding , Composite materials , Quartz , Surface quality , Aerospace industry , Anisotropy , Bridges (Structures) , Fiber reinforced ceramics , Fibers , Instrumentation

Application of Optical Scanning and Photogrammetry for Evaluation of Geometrical Tolerance Values

Andrzej Gessner, Roman Staniek, Jakub Michałek

IMECE 2013; V02AT02A060https://doi.org/10.1115/IMECE2013-62543

Abstract

View Articletitled, Application of Optical Scanning and Photogrammetry for Evaluation of Geometrical Tolerance Values

PDF

Topics: Coordinate measuring machines , Corners (Structural elements) , Cross section (Physics) , Errors , Optical measurement , Photogrammetry , Plates (structures) , Screws , Steel

Optimizing Machining of Machine Tool Casting Bodies by Means of Optical Scanning

Andrzej Gessner, Roman Staniek

IMECE 2013; V02AT02A061https://doi.org/10.1115/IMECE2013-62841

Abstract

View Articletitled, Optimizing Machining of Machine Tool Casting Bodies by Means of Optical Scanning

PDF

Topics: Casting , Machine tools , Machining , Shapes , Cast iron , Cutting , Cutting tools , Damage , High speed machining , Milling

5-Axis In-Line Measurement System for Laser Materials Processing

Yangsheng Li, Lijue Xue, Shaodong Wang

IMECE 2013; V02AT02A062https://doi.org/10.1115/IMECE2013-62932

Abstract

View Articletitled, 5-Axis In-Line Measurement System for Laser Materials Processing

PDF

Topics: Laser materials processing , Measurement systems , Inspection , Lasers , Computer-aided design , Additive manufacturing , Algorithms , Cladding systems (Building) , Computer software , Errors

Process Capability Analysis With GD&T Specifications

Jinya Liu, Wenzhen Huang, Zhenyu Kong, Yingqing Zhou

IMECE 2013; V02AT02A063https://doi.org/10.1115/IMECE2013-62940

Abstract

View Articletitled, Process Capability Analysis With GD&T Specifications

PDF

Topics: Algorithms , Density , Dimensions , Probability , Quality control

Investigation of Motion Control of Liner Axes and a Rotary Axis Under Constant Feed Speed Vector at Milling Point With a Five-Axis Machining Center

Yuma Maruyama, Takayuki Akai, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

IMECE 2013; V02AT02A064https://doi.org/10.1115/IMECE2013-63461

Abstract

View Articletitled, Investigation of Motion Control of Liner Axes and a Rotary Axis Under Constant Feed Speed Vector at Milling Point With a Five-Axis Machining Center

PDF

Topics: Machining centers , Milling , Motion control , Errors , Machining , Surface roughness , Cutting , Manufacturing technology

Finite State Machine Assisted Automatic Tonnage Signal Clustering for Multiple-Operation Forging Processes

Yong Lei, Haibo Xie

IMECE 2013; V02AT02A065https://doi.org/10.1115/IMECE2013-63493

Abstract

View Articletitled, Finite State Machine Assisted Automatic Tonnage Signal Clustering for Multiple-Operation Forging Processes

PDF

Topics: Forging , Machinery , Signals , Errors , Forging machinery , Deformation , Manufacturing , Metalworking , Modeling , Process monitoring

Cutting Temperature Measurement During Titanium Machining With an Atomization–Based Cutting Fluid (ACF) Spray System

Alexander C. Hoyne, Chandra Nath, Shiv G. Kapoor

IMECE 2013; V02AT02A066https://doi.org/10.1115/IMECE2013-63898

Abstract

View Articletitled, Cutting Temperature Measurement During Titanium Machining With an Atomization–Based Cutting Fluid (ACF) Spray System

PDF

Topics: Cooling , Cutting , Fluid films , Fluids , Lubrication , Machining , Sprays , Temperature measurement , Titanium

Fracture Prediction for Sheet Metals Subjected to Draw-Bending Using Forming Limit Stress Criterion

Masazumi Saito, Toshihiko Kuwabara

IMECE 2013; V02AT02A067https://doi.org/10.1115/IMECE2013-64296

Abstract

View Articletitled, Fracture Prediction for Sheet Metals Subjected to Draw-Bending Using Forming Limit Stress Criterion

PDF

Topics: Forming limit diagrams , Fracture (Materials) , Fracture (Process) , Sheet metal , Stress , Testing equipment , Deformation , High strength steel , Plane strain , Sheet metal work

Integration of Fiber Optic Sensors in Measuring Machines

Ashkan Davanlou

IMECE 2013; V02AT02A068https://doi.org/10.1115/IMECE2013-65057

Abstract

View Articletitled, Integration of Fiber Optic Sensors in Measuring Machines

PDF

Topics: Fiber optic sensors , Machinery , Shapes , Inspection , Sensors , Sprays , Cavities , Degrees of freedom , Design , Diesel engines

Sustainable Reverse Engineering Methodology Assisting 3D Modeling of Footwear Safety Metallic Components

Joel V. Silva, Sérgio L. Costa, Hélder Puga, Nuno Peixinho, João P. Mendonça

IMECE 2013; V02AT02A069https://doi.org/10.1115/IMECE2013-65190

Abstract

View Articletitled, Sustainable Reverse Engineering Methodology Assisting 3D Modeling of Footwear Safety Metallic Components

PDF

Topics: Reverse engineering , Safety , Sustainability , Three-dimensional modeling , Data acquisition , Algorithms , Coordinate measuring machines , Lasers , Machinery , Matlab

Innovative Geometric Redesign of Safety Footwear Components Using a Reverse Engineering Approach

Sérgio L. Costa, Joel V. Silva, Nuno Peixinho, João P. Mendonça

IMECE 2013; V02AT02A070https://doi.org/10.1115/IMECE2013-65226

Abstract

View Articletitled, Innovative Geometric Redesign of Safety Footwear Components Using a Reverse Engineering Approach

PDF

Topics: Reverse engineering , Safety , Stiffness , Absorption , Compression , Deformation , Engineering prototypes , Finite element analysis , High strength steel , Materials properties

Table-Based Compensation for 5-Axis Machine Tools

Jennifer R. Creamer, Patrick M. Sammons, Douglas Bristow, Robert G. Landers, Philip Freeman, Samuel Easley

IMECE 2013; V02AT02A071https://doi.org/10.1115/IMECE2013-65381

Abstract

View Articletitled, Table-Based Compensation for 5-Axis Machine Tools

PDF

Topics: Machine tools , Kinematics , Errors , Control equipment , Degrees of freedom , Engineering simulation , Flow (Dynamics) , Lasers , Simulation , Simulation results

Computer-Aided Manufacturing (CAM) Software Development for Laser Machining

Abdolreza Bayesteh, Farid Ahmad, Martin B. G. Jun

IMECE 2013; V02AT02A072https://doi.org/10.1115/IMECE2013-65423

Abstract

View Articletitled, Computer-Aided Manufacturing (CAM) Software Development for Laser Machining

PDF

Topics: Computer-aided manufacturing , Lasers , Machining , Software development , Computer software , Laser ablation , Trajectories (Physics) , Algorithms , Engineering prototypes , Errors

Experimental Investigation of the Tool Wear and Tool Life in Micro Hard Milling

Shreyas Shashidhara, Xinyu Liu, Weihang Zhu, James Curry, Victor Zaloom

IMECE 2013; V02AT02A073https://doi.org/10.1115/IMECE2013-65607

Abstract

View Articletitled, Experimental Investigation of the Tool Wear and Tool Life in Micro Hard Milling

PDF

Topics: Milling , Wear , Cutting , Machining , Cycles , Surface roughness , Micromilling , Dimensions , Failure , Lubrication

Measurement and Process Control in Precision Hot Embossing

Maia R. Bageant, David E. Hardt

IMECE 2013; V02AT02A074https://doi.org/10.1115/IMECE2013-65788

Abstract

View Articletitled, Measurement and Process Control in Precision Hot Embossing

PDF

Topics: Embossing , Process control , Cycles , Biomedicine , Deformation , Displacement , Forming equipment (Packaging) , Glass transition , Instrumentation , Machinery

Development of a Smart Computer Numerical Control System

Zhiqian Sang, Xun Xu

IMECE 2013; V02AT02A075https://doi.org/10.1115/IMECE2013-65984

Abstract

View Articletitled, Development of a Smart Computer Numerical Control System

PDF

Topics: Computers , Control systems , Machining , Computer numerical control machine tools , Control equipment , Motors , Actuators , Computer programming , Cutting tools , Machinery

Investigation of New Generation of Ceramic and Single Crystalline Piezo Materials for Helicopter Blade and UAV Actuation

Devdas Shetty, Claudio Campana, Nikolay Nazaryan, Louis Manzione

IMECE 2013; V02AT02A076https://doi.org/10.1115/IMECE2013-66649

Abstract

View Articletitled, Investigation of New Generation of Ceramic and Single Crystalline Piezo Materials for Helicopter Blade and UAV Actuation

PDF

Topics: Actuators , Advanced materials , Aerospace industry , Blades , Ceramics , Engines , Lumped parameter models , Piezoelectric materials , Reliability , Rotors

High Accuracy, Low-Invasive Displacement Sensor (HALIDS)

Swavik Spiewak, Curtis Zaiss, Stephen J. Ludwick

IMECE 2013; V02AT02A077https://doi.org/10.1115/IMECE2013-66767

Abstract

View Articletitled, High Accuracy, Low-Invasive Displacement Sensor (HALIDS)

PDF

Topics: Displacement , Sensors , Accuracy and precision , Signals , Accelerometers , Cutting tools , Dimensions , End effectors , Engineering design , Engineering prototypes

Computational Modeling and Simulation for Advanced Manufacturing

Investigation of Thermal Cycle and Hardness Distribution in the Laser Cladding of AISI H13 Tool Steel Produced by a High Power Direct Diode Laser

Parisa Farahmand, Prabu Balu, Fanrong Kong, Radovan Kovacevic

IMECE 2013; V02AT02A078https://doi.org/10.1115/IMECE2013-62193

Abstract

View Articletitled, Investigation of Thermal Cycle and Hardness Distribution in the Laser Cladding of AISI H13 Tool Steel Produced by a High Power Direct Diode Laser

PDF

Topics: Cladding systems (Building) , Cycles , Finite element methods , Lasers , Phase transitions , Tool steel

FEM Optimization of Process Parameters and In-Process Cooling in the Friction Stir Processing of Magnesium Alloy AZ31b

A. H. Ammouri, A. H. Kheireddine, G. T. Kridli, R. F. Hamade

IMECE 2013; V02AT02A079https://doi.org/10.1115/IMECE2013-62468

Abstract

View Articletitled, FEM Optimization of Process Parameters and In-Process Cooling in the Friction Stir Processing of Magnesium Alloy AZ31b

PDF

Topics: Cooling , Finite element methods , Finite element model , Friction , Magnesium alloys , Optimization , Flow (Dynamics) , Grain size , Heat , Materials processing

The Design and Finite Element Analyses of the Super-Long Ultrasonic Amplitude Transformer

Yan Wang, Bin Lin, Xiaoyan Cao, Shaolei Wang

IMECE 2013; V02AT02A080https://doi.org/10.1115/IMECE2013-62484

Abstract

View Articletitled, The Design and Finite Element Analyses of the Super-Long Ultrasonic Amplitude Transformer

PDF

Topics: Design , Finite element analysis , Vibration , Computer software , Finite element methods , Finite element model , Simulation results , Stress concentration , Ultrasonic applications , Vibration equipment

Formability Prediction for Thermal Stamping of Magnesium Alloy Sheet Based on M-K Model

Z. H. Chen, Y. Wen, C. H. Sun

IMECE 2013; V02AT02A081https://doi.org/10.1115/IMECE2013-62539

Abstract

View Articletitled, Formability Prediction for Thermal Stamping of Magnesium Alloy Sheet Based on M-K Model

PDF

Topics: Magnesium alloys , Metal stamping , Computer software , Design , Finite element analysis , Forming limit diagrams , Manufacturing , Reliability , Shapes , Sheet metal

An Analysis on Friction Behavior of Metal Material Under Ultrasonic Vibration

Dalong Yi

IMECE 2013; V02AT02A082https://doi.org/10.1115/IMECE2013-62588

Abstract

View Articletitled, An Analysis on Friction Behavior of Metal Material Under Ultrasonic Vibration

PDF

Topics: Friction , Metals , Vibration , Welding , Finite element model , Heat , Manufacturing , Ultrasonic welding

Finite Element Simulation of Cutting Forces in Turning Ti6Al4V Using DEFORM 3D

Kosaraju Satyanarayana, Anne Venu Gopal, Popuri Bangaru Babu

IMECE 2013; V02AT02A083https://doi.org/10.1115/IMECE2013-62868

Abstract

View Articletitled, Finite Element Simulation of Cutting Forces in Turning Ti6Al4V Using DEFORM 3D

PDF

Topics: Cutting , Finite element analysis , Simulation , Turning , Errors , Friction , Heat transfer coefficients , Machinery , Machining , Modeling

Estimation and Control of the Geometric Error in a Linear Interpolator With Parabola Blending

Hongbo Li

IMECE 2013; V02AT02A084https://doi.org/10.1115/IMECE2013-62877

Abstract

View Articletitled, Estimation and Control of the Geometric Error in a Linear Interpolator With Parabola Blending

PDF

Topics: Errors , Chords (Trusses) , Trajectories (Physics) , Approximation , Machine tools , Interpolation

Effects of Initial Rolling Temperature on Rolling Deformation and Microstructure Evolution of 42CrMo Casting Ring Blank

Ju Li, Yongtang Li, Huiping Qi, Huiqin Chen

IMECE 2013; V02AT02A085https://doi.org/10.1115/IMECE2013-63055

Abstract

View Articletitled, Effects of Initial Rolling Temperature on Rolling Deformation and Microstructure Evolution of 42CrMo Casting Ring Blank

PDF

Topics: Blanks , Casting , Deformation , Temperature , Recrystallization , Computer software , Finite element methods , Grain size , Simulation , Simulation results

Dynamic FE Analysis for Reducing the Flat Areas of Formed Shapes Obtained by Roll Bending Process

Hoang Quan Tran, Henri Champliaud, Zhengkun Feng, Thien-My Dao

IMECE 2013; V02AT02A086https://doi.org/10.1115/IMECE2013-63302

Abstract

View Articletitled, Dynamic FE Analysis for Reducing the Flat Areas of Formed Shapes Obtained by Roll Bending Process

PDF

Topics: Finite element analysis , Shapes , Simulation , Deformation , Manufacturing , Cylinders , Displacement , High strength steel , Machinery , Pipes

The Modeling and Prediction of Gravity Deformation in Precision Machine Tool Assembly

Junkang Guo, Jun Hong, Xiaopan Wu, Mengxi Wang, Yan Feng

IMECE 2013; V02AT02A087https://doi.org/10.1115/IMECE2013-63441

Abstract

View Articletitled, The Modeling and Prediction of Gravity Deformation in Precision Machine Tool Assembly

PDF

Topics: Deformation , Gravity (Force) , Machine tools , Manufacturing , Modeling , Errors , Design , Bearings , Computer-aided engineering , Finite element methods

Measurement and Simulation of Electric Power Consumption of Feed Drive Systems

Akio Hayashi, Ryuta Sato, Ryoma Iwase, Masayuki Hashimoto, Keiichi Shirase

IMECE 2013; V02AT02A088https://doi.org/10.1115/IMECE2013-63518

Abstract

View Articletitled, Measurement and Simulation of Electric Power Consumption of Feed Drive Systems

PDF

Topics: Electricity (Physics) , Friction , Linear motors , Screws , Simulation

Toward the Ideal of Automating Production Optimization

J. Michaloski, F. Proctor, J. Arinez, J. Berglund

IMECE 2013; V02AT02A089https://doi.org/10.1115/IMECE2013-63546

Abstract

View Articletitled, Toward the Ideal of Automating Production Optimization

PDF

Topics: Optimization , Production systems optimization , Casting , Data acquisition , Computer simulation , Computer software , Data collection , Modeling , Simulation

Computational Optimization of Arc Welding Parameters Using Coupled Genetic Algorithms and Finite Element Method

Mohammad R. Islam, Jens Rohbrecht, Arjaan Buijk, Ehsan Namazi, Bing Liu, Keiichi Motoyama

IMECE 2013; V02AT02A090https://doi.org/10.1115/IMECE2013-63628

Abstract

View Articletitled, Computational Optimization of Arc Welding Parameters Using Coupled Genetic Algorithms and Finite Element Method

PDF

Topics: Arc welding , Computer-aided engineering , Finite element analysis , Finite element methods , Genetic algorithms , Optimization , Simulation , Welding

Comparative Study Between FEA-Based Sequentially-Coupled and Fully-Coupled Thermal Stress Models in a Laser Hardening Process

Suhash Ghosh, Chittaranjan Sahay, Joseph Connors

IMECE 2013; V02AT02A091https://doi.org/10.1115/IMECE2013-63745

Abstract

View Articletitled, Comparative Study Between FEA-Based Sequentially-Coupled and Fully-Coupled Thermal Stress Models in a Laser Hardening Process

PDF

Topics: Finite element analysis , Laser hardening , Thermal stresses , Temperature , Stress , Hardening , Lasers , Stress analysis (Engineering) , Temperature distribution , Modeling

Quantitative Optimization of a Custom Flexible Manufacturing Platform for Assembly and Packaging of Heterogeneous Microsystems

Aditya Das

IMECE 2013; V02AT02A092https://doi.org/10.1115/IMECE2013-63800

Abstract

View Articletitled, Quantitative Optimization of a Custom Flexible Manufacturing Platform for Assembly and Packaging of Heterogeneous Microsystems

PDF

Topics: Manufacturing , Microelectromechanical systems , Optimization , Packaging , Design , Design for Manufacturing , Cycles , Product development , Case studies , Computer software

Computational Fluid Dynamic Analysis of Atomization Spray Cooling Nozzle Designs for Micromachining

Andressa Lunardelli, John E. Wentz

IMECE 2013; V02AT02A093https://doi.org/10.1115/IMECE2013-63982

Abstract

View Articletitled, Computational Fluid Dynamic Analysis of Atomization Spray Cooling Nozzle Designs for Micromachining

PDF

Topics: Computational fluid dynamics , Cooling , Micromachining , Nozzles , Sprays , Drops , Design , Cutting , Fluids , Cooling systems

Simplified Thermo-Elastoplastic Numerical Modelling Techniques Applied to Friction Stir Welding of Mild Steel

Daniel Micallef, Duncan Camilleri, Pierluigi Mollicone

IMECE 2013; V02AT02A094https://doi.org/10.1115/IMECE2013-64387

Abstract

View Articletitled, Simplified Thermo-Elastoplastic Numerical Modelling Techniques Applied to Friction Stir Welding of Mild Steel

PDF

Topics: Friction , Modeling , Steel , Welding , Heat , Manufacturing , Residual stresses , Boundary-value problems , Heat flux , Joining

Variation Simulation of Welded Assemblies Using a Thermo-Elastic Finite Element Model

Samuel Lorin, Christoffer Cromvik, Fredrik Edelvik, Lars Lindkvist, Rikard Söderberg

IMECE 2013; V02AT02A095https://doi.org/10.1115/IMECE2013-64512

Abstract

View Articletitled, Variation Simulation of Welded Assemblies Using a Thermo-Elastic Finite Element Model

PDF

Topics: Finite element model , Simulation , Thermoelasticity , Welding

Numerical Analysis of Droplet Impact, Deformation of a Droplet Train in Direct Print Technology

Muhammad Noman Hasan, Morteza Vatani, Yanfeng Lu, Ho-Chan Kim, Jae-Won Choi

IMECE 2013; V02AT02A096https://doi.org/10.1115/IMECE2013-64801

Abstract

View Articletitled, Numerical Analysis of Droplet Impact, Deformation of a Droplet Train in Direct Print Technology

PDF

Topics: Deformation , Drops , Numerical analysis , Trains , Liquid films , Printing , Flow (Dynamics) , Fluid dynamics , Fluids , Manufacturing

Computer Modeling and Simulation Framework for Particulate Spray Based Manufacturing Processes

Debanjan Mukherjee, Tarek Zohdi

IMECE 2013; V02AT02A097https://doi.org/10.1115/IMECE2013-64933

Abstract

View Articletitled, Computer Modeling and Simulation Framework for Particulate Spray Based Manufacturing Processes

PDF

Topics: Computer simulation , Manufacturing , Particulate matter , Simulation , Sprays , Collisions (Physics) , Dynamics (Mechanics) , Particle dynamics , Coating processes , Coatings

Tunable and Transferrable Bar Feeder Damping Design for Advanced Manufacturing

Harry A. Pierson, Kumer V. Singh

IMECE 2013; V02AT02A098https://doi.org/10.1115/IMECE2013-64970

Abstract

View Articletitled, Tunable and Transferrable Bar Feeder Damping Design for Advanced Manufacturing

PDF

Topics: Damping , Design , Manufacturing , Vibration , Tooling , Vibration suppression , Computer numerical control machine tools , Fluid bearings , Machinery , Resonance

A New Method for the Generation of Tool Paths for Finishing Near Net Shape Components

Edgar A. Mendoza López, Hugo I. Medellín Castillo, Dirk F. de Lange, Theo Lim

IMECE 2013; V02AT02A099https://doi.org/10.1115/IMECE2013-65483

Abstract

View Articletitled, A New Method for the Generation of Tool Paths for Finishing Near Net Shape Components

PDF

Topics: Computer numerical control machine tools , Finishing , Machining , Shapes

Effect of Lubrication in Nano-Indentation Process: A Molecular Dynamics Simulation Study

Yachao Wang, Jing Shi

IMECE 2013; V02AT02A100https://doi.org/10.1115/IMECE2013-65651

Abstract

View Articletitled, Effect of Lubrication in Nano-Indentation Process: A Molecular Dynamics Simulation Study

PDF

Topics: Friction , Lubrication , Molecular dynamics simulation , Nanoindentation

Ultrasonic-Assisted Cylindrical Grinding of Alumina-Zirconia Ceramics

Taghi Tawakoli, Javad Akbari, Ali Zahedi

IMECE 2013; V02AT02A101https://doi.org/10.1115/IMECE2013-65811

Abstract

View Articletitled, Ultrasonic-Assisted Cylindrical Grinding of Alumina-Zirconia Ceramics

PDF

Topics: Ceramics , Grinding

A Comparison of Continuum, DSMC and Free Molecular Modeling Techniques for Physical Vapor Deposition

Kevin Gott, Anil Kulkarni, Jogender Singh

IMECE 2013; V02AT02A102https://doi.org/10.1115/IMECE2013-66433

Abstract

View Articletitled, A Comparison of Continuum, DSMC and Free Molecular Modeling Techniques for Physical Vapor Deposition

PDF

Topics: Modeling , Vapor deposition , Flow (Dynamics) , Physics , Coating processes , Coatings , Manufacturing , Pressure , Evaporation , Simulation

Design of a Nozzle for the Production of Metal Powder via Gas Atomization

Mehmet Alper Sofuoglu, Murat Erbas, Ibrahim Uslan, Atilla Biyikoglu

IMECE 2013; V02AT02A103https://doi.org/10.1115/IMECE2013-66761

Abstract

View Articletitled, Design of a Nozzle for the Production of Metal Powder via Gas Atomization

PDF

Topics: Design , Metal powders , Nozzles , Pressure , Computational fluid dynamics , Computer simulation , Flow (Dynamics) , Geometry , Vacuum

Development of a Swirl Nozzle for Powder Technology

Mehmet Alper Sofuoglu, Murat Erbas, Ibrahim Uslan, Atilla Biyikoglu

IMECE 2013; V02AT02A104https://doi.org/10.1115/IMECE2013-66777

Abstract

View Articletitled, Development of a Swirl Nozzle for Powder Technology

PDF

Topics: Nozzles , Powder metallurgy , Design , Geometry , Pressure , Computational fluid dynamics , Flow (Dynamics) , Metal powders , Vacuum

Modeling of Solidification and Microstructure Evolution in the Scanning Laser Epitaxy (SLE) Process for Additive Manufacturing With Nickel-Base Superalloy Powders

Ranadip Acharya, Rohan Bansal, Justin J. Gambone, Suman Das

IMECE 2013; V02AT02A105https://doi.org/10.1115/IMECE2013-66807

Abstract

View Articletitled, Modeling of Solidification and Microstructure Evolution in the Scanning Laser Epitaxy (SLE) Process for Additive Manufacturing With Nickel-Base Superalloy Powders

PDF

Topics: Additive manufacturing , Epitaxy , Lasers , Modeling , Nickel , Solidification , Solid-liquid equilibrium , Superalloys , Flow (Dynamics) , Alloys

All Years

Proceedings Papers

Advanced Manufacturing

Additive Manufacturing

Advanced Forming

Advanced Materials Design, Synthesis, and Processing

Advancing Sensing, Measurement, and Process Control in Manufacturing

Computational Modeling and Simulation for Advanced Manufacturing

Email alerts

Most Read Proceedings Papers in IMECE

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only