Volumes | ASME International Mechanical Engineering Congress and Exposition | American Society of Mechanical Engineers Digital Collection

Volume 3: Design, Materials and Manufacturing, Parts A, B, and C

Design, Materials, and Manufacturing

Advances in Material Forming, Applications, Tooling and Rapid Prototyping

Study on Welding Seam Strength and Die Life Assessment for Square Tube Extrusion of Aluminum Alloy 7075

Quang-Cherng Hsu, Kun-Hong Kuo, Bo-Feng Sheng

IMECE 2012; 1-7https://doi.org/10.1115/IMECE2012-85689

View Articletitled, Study on Welding Seam Strength and Die Life Assessment for Square Tube Extrusion of Aluminum Alloy 7075

PDF

Topics: Aluminum alloys , Extruding , Welding , Stress , Bonding , Computer software , Corners (Structural elements) , Design , Dimensions , Finite element analysis

Modeling Tape Cast Ceramics With Multiple Layers of Fugitive Phase Materials

Stephanie A. Wimmer, Ming-Jen Pan, Virginia G. DeGiorgi, Edward P. Gorzkowski, Alan C. Leung

IMECE 2012; 9-16https://doi.org/10.1115/IMECE2012-86279

Abstract

View Articletitled, Modeling Tape Cast Ceramics With Multiple Layers of Fugitive Phase Materials

PDF

Topics: Ceramics , Modeling , Industrial ceramics , Manufacturing , Dimensions , Lamination , Cavities , Deformation , Laminates , Pressure gradient

Application of Bayesian Analysis Method in the Design Optimization of Permanent Casting Mold

Yaou Wang, David Schwam

IMECE 2012; 17-21https://doi.org/10.1115/IMECE2012-86413

Abstract

View Articletitled, Application of Bayesian Analysis Method in the Design Optimization of Permanent Casting Mold

PDF

Topics: Casting , Design , Mechanical properties , Optimization

Simulation of Blank Design for Blades of Francis Turbines

Zhengkun Feng, Henri Champliaud, Michel Sabourin, Sebastien Morin

IMECE 2012; 23-30https://doi.org/10.1115/IMECE2012-86427

Abstract

View Articletitled, Simulation of Blank Design for Blades of Francis Turbines

PDF

Topics: Blades , Blanks , Design , Finite element analysis , Francis turbines , Pressing , Simulation

Using Forming Simulation Results in Virtual Assembly Analysis

Björn Lindau, Alf Andersson, Lars Lindkvist, Rikard Söderberg

IMECE 2012; 31-38https://doi.org/10.1115/IMECE2012-87297

Abstract

View Articletitled, Using Forming Simulation Results in Virtual Assembly Analysis

PDF

Topics: Manufacturing , Simulation , Simulation results , Virtual assembly , Automotive industry , Design , Geometry , Principal component analysis , Robustness , Shapes

Experimental and Numerical Investigation of Extrusion Die Profiles for Uniform and Effective Case-Hardening Treatment

Syed Sohail Akhtar, Abul Fazal M. Arif

IMECE 2012; 39-48https://doi.org/10.1115/IMECE2012-87401

Abstract

View Articletitled, Experimental and Numerical Investigation of Extrusion Die Profiles for Uniform and Effective Case-Hardening Treatment

PDF

Topics: Aluminum extrusions , Bearings , Cavities , Design , Electrical discharge machining , Extruding , Finite element analysis , Microhardness , Nitriding , Nitrogen

How to Design and Create a Cardan Shaft for a Single Port Robot by Selective Laser Sintering

Daniel B. Roppenecker, Mattias F. Traeger, Jan D. J. Gumprecht, Tim C. Lueth

IMECE 2012; 49-58https://doi.org/10.1115/IMECE2012-87654

Abstract

View Articletitled, How to Design and Create a Cardan Shaft for a Single Port Robot by Selective Laser Sintering

PDF

Topics: Biomedicine , Design , Lasers , Robotics , Robots , Sintering

Additive Manufacturing: Exploration of Porosity and Form Features Using Layer by Layer Deposition

Devdas Shetty, Daniel Ly

IMECE 2012; 59-65https://doi.org/10.1115/IMECE2012-88277

Abstract

View Articletitled, Additive Manufacturing: Exploration of Porosity and Form Features Using Layer by Layer Deposition

PDF

Topics: Additive manufacturing , Porosity , Aerospace industry , Design , Lasers , Manufacturing , Aircraft , Alloys , Calibration , Engineering design processes

Simulations of Thermo-Mechanical Characteristics in Electron Beam Additive Manufacturing

Ninggang Shen, Kevin Chou

IMECE 2012; 67-74https://doi.org/10.1115/IMECE2012-88476

Abstract

View Articletitled, Simulations of Thermo-Mechanical Characteristics in Electron Beam Additive Manufacturing

PDF

Topics: Additive manufacturing , Cathode ray oscilloscopes , Electron beams , Engineering simulation , Residual stresses , Thermomechanics

Numerical Simulation of Forging Process of Spiral Bevel Gear

Rong-Jer Lai

IMECE 2012; 75-76https://doi.org/10.1115/IMECE2012-89107

Abstract

View Articletitled, Numerical Simulation of Forging Process of Spiral Bevel Gear

PDF

Topics: Computer simulation , Forging , Spiral bevel gears , Stress , Design , Flow (Dynamics) , Friction , Patents , Raw materials , Shapes

Numerical Simulation and Experimental Investigation of Gas-Powder Flow in Inner Powder Delivery System

Shuang Liu, Fanrong Kong, Shihong Shi, Radovan Kovacevic

IMECE 2012; 77-87https://doi.org/10.1115/IMECE2012-89573

Abstract

View Articletitled, Numerical Simulation and Experimental Investigation of Gas-Powder Flow in Inner Powder Delivery System

PDF

Topics: Cladding systems (Building) , Computer simulation , Flow (Dynamics) , Lasers

CAD, CAM, and CAE Simulations

Geometrical Coupling Analysis to Reduce Complete Assembly Line Complexity

Peter Edholm, Lars Lindkvist, Rikard Söderberg

IMECE 2012; 89-96https://doi.org/10.1115/IMECE2012-85788

Abstract

View Articletitled, Geometrical Coupling Analysis to Reduce Complete Assembly Line Complexity

PDF

Topics: Assembly lines

Robust Design and Geometry Assurance Considering Assembly Ergonomics

M. Rosenqvist, A.-C. Falck, R. Söderberg

IMECE 2012; 97-104https://doi.org/10.1115/IMECE2012-86267

Abstract

View Articletitled, Robust Design and Geometry Assurance Considering Assembly Ergonomics

PDF

Topics: Design , Ergonomics , Geometry , Manufacturing

Computer Simulation and Modelling of Standing Wave Piezoelectric Ultrasonic Motor Using a Single Flexural Transducer

M. Shafik

IMECE 2012; 105-112https://doi.org/10.1115/IMECE2012-86296

Abstract

View Articletitled, Computer Simulation and Modelling of Standing Wave Piezoelectric Ultrasonic Motor Using a Single Flexural Transducer

PDF

Topics: Computer simulation , Engines , Modeling , Motors , Standing waves , Transducers , Ultrasonic motors

Multi-Point Positioning Method for Flexible Tooling System in Aircraft Manufacturing

Chunqing Liu, J. Hong, Shaofeng Wang

IMECE 2012; 113-117https://doi.org/10.1115/IMECE2012-86820

Abstract

View Articletitled, Multi-Point Positioning Method for Flexible Tooling System in Aircraft Manufacturing

PDF

Topics: Aircraft , Flexible tooling , Manufacturing , Optimization , Tooling , Deformation , Machining , Computer simulation , Finite element analysis , Stiffness

Numerical Investigation of Selective Laser Melting Process for 904L Stainless Steel

Miranda Fateri, Andreas Gebhardt, Maziar Khosravi

IMECE 2012; 119-124https://doi.org/10.1115/IMECE2012-86964

Abstract

View Articletitled, Numerical Investigation of Selective Laser Melting Process for 904L Stainless Steel

PDF

Topics: Lasers , Melting , Stainless steel , Finite element analysis , Heat flux , Bulk solids , Density , Electromagnetic scattering , Enthalpy , Gaussian distribution

Development of a Graphical User Interface for Design of Thin Curved Beams

Shahnam Navaee

IMECE 2012; 125-130https://doi.org/10.1115/IMECE2012-87086

Abstract

View Articletitled, Development of a Graphical User Interface for Design of Thin Curved Beams

PDF

Topics: Design , Graphical user interfaces , Matlab , Computer software , Stress , Cantilever beams , Computation , Deflection , Deformation , Engineering mechanics

The Convergence and Algorithm Factors Analysis of Topology Optimization for Crashworthiness Based on Hybrid Cellular Automata

LianShui Guo, Jun Huang, Xuan Zhou, Andres Tovar

IMECE 2012; 131-139https://doi.org/10.1115/IMECE2012-87291

Abstract

View Articletitled, The Convergence and Algorithm Factors Analysis of Topology Optimization for Crashworthiness Based on Hybrid Cellular Automata

PDF

Topics: Algorithms , Crashworthiness , Optimization , Topology , Bone , Deformation , Design , Finite element analysis , Robots , Structural design

Optimized Radial Basis Function Metamodel for Expensive Engineering Design Optimization

Lv Wang, Teng Long, Lei Peng, Li Liu

IMECE 2012; 141-148https://doi.org/10.1115/IMECE2012-87489

Abstract

View Articletitled, Optimized Radial Basis Function Metamodel for Expensive Engineering Design Optimization

PDF

Topics: Engineering design , Optimization , Approximation , Design

Automatic Geometric Recognition of Weld Beads for Supporting Virtual Prototyping and Cost Estimation of Welding

Roberto Raffaeli, Marco Malatesta, Marco Mandolini, Michele Germani

IMECE 2012; 149-158https://doi.org/10.1115/IMECE2012-87537

Abstract

View Articletitled, Automatic Geometric Recognition of Weld Beads for Supporting Virtual Prototyping and Cost Estimation of Welding

PDF

Topics: Welding , Welded joints , Computer-aided design , Manufacturing , Design , Sheet metal , Topology

Estimation of Residual Stress in Spiral Welded Pipe: Regression and Numerical Model

Abul Fazal M. Arif, Ahmad S. Al-Omari, Anwar K. Sheikh, Yagoub Al-Nassar, M. Anis

IMECE 2012; 159-168https://doi.org/10.1115/IMECE2012-87703

Abstract

View Articletitled, Estimation of Residual Stress in Spiral Welded Pipe: Regression and Numerical Model

PDF

Topics: Computer simulation , Pipes , Stress , Residual stresses , Welding , Failure , Finite element model , Manufacturing , Modeling , Petrochemicals

A Computer-Based Design System for Lightweight Grippers in the Automotive Industry

Håkan Petersson, Damien Motte, Martin Eriksson, Robert Bjärnemo

IMECE 2012; 169-179https://doi.org/10.1115/IMECE2012-88067

Abstract

View Articletitled, A Computer-Based Design System for Lightweight Grippers in the Automotive Industry

PDF

Topics: Automotive industry , Computers , Design , Grippers , Conceptual design , Trucks , Carbon fibers , Composite materials , Computer-aided engineering , Inertia (Mechanics)

Comparison of Computer Algebra Systems for Closed Form Stiffness Matrix Generation

Panos S. Shiakolas, David C. Wilhite, Sara E. McCaslin

IMECE 2012; 181-186https://doi.org/10.1115/IMECE2012-88263

Abstract

View Articletitled, Comparison of Computer Algebra Systems for Closed Form Stiffness Matrix Generation

PDF

Topics: Algebra , Computers , Stiffness , Finite element analysis , Public utilities

Development of a Toolkit for the Analysis and Design of Composite Pressure Vessels

Elias Ledesma, Salvador M. Aceves, Francisco Espinoza-Loza, Bahram Ravani

IMECE 2012; 187-198https://doi.org/10.1115/IMECE2012-88505

Abstract

View Articletitled, Development of a Toolkit for the Analysis and Design of Composite Pressure Vessels

PDF

Topics: Composite materials , Design , Pressure vessels , Fibers , Algorithms , Failure , Graphical user interfaces , Honeycomb structures , Metals , Parametric design

Evaluation of Backstitch Tool Path Strategy for Stability and Productivity in Micro-Drilling

Jong-Seol Moon, Hae-Sung Yoon, Gyu-Bong Lee, Sung-Hoon Ahn

IMECE 2012; 199-203https://doi.org/10.1115/IMECE2012-88552

Abstract

View Articletitled, Evaluation of Backstitch Tool Path Strategy for Stability and Productivity in Micro-Drilling

PDF

Topics: Drilling , Stability , Machining , Micromanufacturing , Printed circuit boards , Thrust

Experimental Analysis and FEA of Friction Stir Welding on Aluminium Plates

Elias Ledesma, Eduardo Aguilera, Gilberto Villalobos

IMECE 2012; 205-210https://doi.org/10.1115/IMECE2012-88553

Abstract

View Articletitled, Experimental Analysis and FEA of Friction Stir Welding on Aluminium Plates

PDF

Topics: Aluminum , Experimental analysis , Finite element analysis , Friction , Plates (structures) , Welding

Study on the Flange Manufacturing of Pipe With High Pressures

SeungGul Baek, XueGuan Song, YoungChul Park, TaeGual Kim, KyoungYong Park, KwangSun Kim

IMECE 2012; 211-216https://doi.org/10.1115/IMECE2012-88592

Abstract

View Articletitled, Study on the Flange Manufacturing of Pipe With High Pressures

PDF

Topics: Flanges , Manufacturing , Pipes , Finite element analysis , Forging , Welding , Optimization , Safety

Design Enhancement of the CANDU Spent Fuel Storage Basket

Woo-Seok Choi, Jae-Eon Jeon, Ki-Seog Seo, Ju-Chan Lee

IMECE 2012; 217-222https://doi.org/10.1115/IMECE2012-89101

Abstract

View Articletitled, Design Enhancement of the CANDU Spent Fuel Storage Basket

PDF

Topics: Design , Spent fuel storage , Structural analysis , Welding , Accidents , Leakage , Licensing , Nuclear power , Storage , Test facilities

Optimum Design of High-Speed 4-Bar Mechanisms Using a Bi-Level Game Theoretic Approach

Ehsan Ghotbi, Anoop K. Dhingra

IMECE 2012; 223-232https://doi.org/10.1115/IMECE2012-89247

Abstract

View Articletitled, Optimum Design of High-Speed 4-Bar Mechanisms Using a Bi-Level Game Theoretic Approach

PDF

Topics: Design , Theoretical methods

Development of Virtual Sculpting System With Haptics in PowerWall 3-D Virtual Environment

Xiaobo Peng, Blesson Isaac

IMECE 2012; 233-240https://doi.org/10.1115/IMECE2012-89452

Abstract

View Articletitled, Development of Virtual Sculpting System With Haptics in PowerWall 3-D Virtual Environment

PDF

Topics: Haptics , Product design , Virtual reality

Methodology for the Economic Viability of Companies in the Semantic Adaptation of Information Systems

Elsa Marcelino-Jesus, Joao Sarraipa, Mário Antão, Ricardo Jardim-Goncalves, João Mendonça da Silva

IMECE 2012; 241-249https://doi.org/10.1115/IMECE2012-89475

Abstract

View Articletitled, Methodology for the Economic Viability of Companies in the Semantic Adaptation of Information Systems

PDF

Topics: Collaboration , Ontologies , Semantics

Simplified Interior Ballistics Analysis of a Hybrid Projectile Prototype

Edward Jackson, Jay Wilhelm, Patrick H. Browning, Victor Mucino, Mridul Gautam

IMECE 2012; 251-260https://doi.org/10.1115/IMECE2012-89522

Abstract

View Articletitled, Simplified Interior Ballistics Analysis of a Hybrid Projectile Prototype

PDF

Topics: Ballistics , Engineering prototypes , Projectiles , Stress , Combustion , Design , Mortar , Propellants , Engineering simulation , Pressure

A Virtual Tool for Wear Simulation of Standard and Non-Standard Spur Gears

F. Karpat, S. Ekwaro-Osire, E. Karpat

IMECE 2012; 261-264https://doi.org/10.1115/IMECE2012-89759

Abstract

View Articletitled, A Virtual Tool for Wear Simulation of Standard and Non-Standard Spur Gears

PDF

Topics: Simulation , Spur gears , Wear , Gears , Computer simulation , Failure , Failure mechanisms , Gear teeth , Load bearing capacity , Matlab

Design and Manufacturing of Aerospace, Transportation and Food Industry Applications

Optimal Design of Mechanical Transmissions for High Performance Servo-Drive Systems

Hani A. Arafa, Mohamed L. Shaltout

IMECE 2012; 265-273https://doi.org/10.1115/IMECE2012-85269

Abstract

View Articletitled, Optimal Design of Mechanical Transmissions for High Performance Servo-Drive Systems

PDF

Topics: Design , Mechanical drives , Servo drives , Gears , Inertia (Mechanics) , Wheels , Screws , Dimensions , Rotational inertia , Servomechanisms

Assessing Multimedia Content Adaptation Techniques With a View to Using Heterogeneous Handheld Devices in Performing Product Development Tasks

Eliab Z. Opiyo

IMECE 2012; 275-288https://doi.org/10.1115/IMECE2012-85471

Abstract

View Articletitled, Assessing Multimedia Content Adaptation Techniques With a View to Using Heterogeneous Handheld Devices in Performing Product Development Tasks

PDF

Topics: Multimedia , Product development , Synchronization , Engineers , Preferences , Three-dimensional models

The Influence of Transmission Ratios Selection on Electric Vehicle Motor Performance

X. X. Zhou, P. D. Walker, N. Zhang, B. Zhu, F. Ding

IMECE 2012; 289-296https://doi.org/10.1115/IMECE2012-85906

Abstract

View Articletitled, The Influence of Transmission Ratios Selection on Electric Vehicle Motor Performance

PDF

Topics: Electric vehicles , Engines , Motors , Design , Gears , Vehicles

An Investigation Into the Influence of Ultrasonic Servo Feed Drive Technology in Electro Discharge Machining Industrial Applications

M. Shafik

IMECE 2012; 297-304https://doi.org/10.1115/IMECE2012-86507

Abstract

View Articletitled, An Investigation Into the Influence of Ultrasonic Servo Feed Drive Technology in Electro Discharge Machining Industrial Applications

PDF

Topics: Electrical discharge machining , Servomechanisms

Optimal Layout of an Offshore Crane Using Topology Optimization

In Gwun Jang, Byung Man Kwak

IMECE 2012; 305-308https://doi.org/10.1115/IMECE2012-87414

Abstract

View Articletitled, Optimal Layout of an Offshore Crane Using Topology Optimization

PDF

Topics: Cranes , Ocean engineering , Optimization , Topology , Seas , Design , Containers , Inertia (Mechanics) , Ships , Stress

Toward Better Integration of Vehicle Assembly Production Systems

Jorge Arinez, Jerry Yen, John Michaloski, Frederick Proctor, William Rippey

IMECE 2012; 309-318https://doi.org/10.1115/IMECE2012-87941

Abstract

View Articletitled, Toward Better Integration of Vehicle Assembly Production Systems

PDF

Topics: Manufacturing , Manufacturing systems , Vehicles , Automotive industry , Errors

Design Innovations, Methodologies and Philosophies

Multi-Directional Blending for Heterogeneous Object Modeling

Ibrahim T. Ozbolat, Bahattin Koc, Yaqin Deng

IMECE 2012; 319-324https://doi.org/10.1115/IMECE2012-85623

Abstract

View Articletitled, Multi-Directional Blending for Heterogeneous Object Modeling

PDF

Topics: Modeling , Generators

Supporting the Ideation Process and Representation of the Design of a Product as Part of a Real Life Use Process

Eliab Z. Opiyo

IMECE 2012; 325-333https://doi.org/10.1115/IMECE2012-85938

Abstract

View Articletitled, Supporting the Ideation Process and Representation of the Design of a Product as Part of a Real Life Use Process

PDF

Topics: Design , Product development

Design of Module for Modular Customized Manipulators

Satwinder Singh, Sameer Gupta, Ekta Singla

IMECE 2012; 335-339https://doi.org/10.1115/IMECE2012-86268

Abstract

View Articletitled, Design of Module for Modular Customized Manipulators

PDF

Topics: Design , Manipulators , Robotics , Robots

Comprehensive Engineering: A New Concurrent Engineering to Reduce Cost and Increase Productivity Across Industries

Shuichi Fukuda

IMECE 2012; 341-346https://doi.org/10.1115/IMECE2012-86410

Abstract

View Articletitled, Comprehensive Engineering: A New Concurrent Engineering to Reduce Cost and Increase Productivity Across Industries

PDF

Topics: Concurrent engineering , Energy consumption

Generation of Optimized Robotic Assembly Sequence Using Immune Based Technique

Bibhuti Bhusan Biswal, Sujit Kumar Pattanayak, Rabindra Narayan Mohapatra, Pramod Kumar Parida, Panchanand Jha

IMECE 2012; 347-355https://doi.org/10.1115/IMECE2012-87374

Abstract

View Articletitled, Generation of Optimized Robotic Assembly Sequence Using Immune Based Technique

PDF

Topics: Robotic assembly , Manufacturing , Robotics , Robots

A Framework for Enhancing Outside-the-Box Thinking in Engineering Design, Demonstrated on a Case Study

Holger M. Roser, W. John Dartnall

IMECE 2012; 357-366https://doi.org/10.1115/IMECE2012-87376

Abstract

View Articletitled, A Framework for Enhancing Outside-the-Box Thinking in Engineering Design, Demonstrated on a Case Study

PDF

Topics: Design , Engineering design

A KBE Design Methodology to Support Li-Ion Battery Cooling for Hybrid and Electric Vehicles

Daniele Landi, Paolo Cicconi, Michele Germani

IMECE 2012; 367-375https://doi.org/10.1115/IMECE2012-87391

Abstract

View Articletitled, A KBE Design Methodology to Support Li-Ion Battery Cooling for Hybrid and Electric Vehicles

PDF

Topics: Cooling , Design methodology , Electric vehicles , Lithium-ion batteries , Batteries , Design , Electrochemical reactions , Heat , Collaboration , Computer simulation

Toward a Method for Improving Product Architecture Solutions by Integrating Designs for Assembly, Disassembly and Maintenance

Andreas Dagman, Rikard Söderberg

IMECE 2012; 377-387https://doi.org/10.1115/IMECE2012-87466

Abstract

View Articletitled, Toward a Method for Improving Product Architecture Solutions by Integrating Designs for Assembly, Disassembly and Maintenance

PDF

Topics: Design , Maintenance , Manufacturing , Cycles , Product development , Automotive industry , Carbon dioxide , Emissions , Energy consumption , Maintainability

Development of a Predictive Design Methodology for Structural Polymers Subject to Long-Term Loadings

Julie R. Jackson, Glenn E. Vallee

IMECE 2012; 389-396https://doi.org/10.1115/IMECE2012-87912

Abstract

View Articletitled, Development of a Predictive Design Methodology for Structural Polymers Subject to Long-Term Loadings

PDF

Topics: Design methodology , Polymers , Creep , Rupture , Failure , Stress , Temperature , Design , Testing , Finite element analysis

A Search-Based Approach for Prediction of Flexible Hose Shapes

Tristan Hermann, Lalit Patil, Lakshmi Srinivas, Krishna Murthy, Debasish Dutta

IMECE 2012; 397-404https://doi.org/10.1115/IMECE2012-88012

Abstract

View Articletitled, A Search-Based Approach for Prediction of Flexible Hose Shapes

PDF

Topics: Shapes , Computer-aided engineering , Cables , Databases , Engineering simulation , Simulation , Automobiles , Design , Vehicles

Investigation of Riding Position Effects on Time-Trial Bicycle Drag Coefficient at Different Yaw Angles

Peter N. Doval, Ilya V. Avdeev

IMECE 2012; 405-409https://doi.org/10.1115/IMECE2012-88247

Abstract

View Articletitled, Investigation of Riding Position Effects on Time-Trial Bicycle Drag Coefficient at Different Yaw Angles

PDF

Topics: Bicycles , Drag (Fluid dynamics) , Yaw , Simulation , Computational fluid dynamics , Wind , Aerodynamics , Fluid dynamics , Gears , Geometry

A Petri-Net Model for Machine Structure Configuration Approach

S. Maaz Hasan, Aamer Ahmed Baqai, M. Nadeem Azam

IMECE 2012; 411-421https://doi.org/10.1115/IMECE2012-88846

Abstract

View Articletitled, A Petri-Net Model for Machine Structure Configuration Approach

PDF

Topics: Machinery , Machining

Monitor for Information Alignment and Sustainability in Logistics Networks

Jose Ferreira, Carlos Agostinho, Elisabeth Ilie-Zudor, Ricardo Jardim-Goncalves

IMECE 2012; 423-432https://doi.org/10.1115/IMECE2012-89478

Abstract

View Articletitled, Monitor for Information Alignment and Sustainability in Logistics Networks

PDF

Topics: Logistics , Sustainability , Decision making , Manufacturing , Information models , Supply chains , Transportation systems

A Methodology Based on Interactive Virtual Prototypes for a Better Design of Consumer-Product Interaction

Francesco Ferrise, Monica Bordegoni, Umberto Cugini

IMECE 2012; 433-440https://doi.org/10.1115/IMECE2012-89490

Abstract

View Articletitled, A Methodology Based on Interactive Virtual Prototypes for a Better Design of Consumer-Product Interaction

PDF

Topics: Design , Engineering prototypes , Feedback , Physics , Product design , Reverse engineering

Evaluating TRIZ as a Provider of Provocative Stimuli

Ryan Arlitt, Anthony Nix, Rob Stone

IMECE 2012; 441-449https://doi.org/10.1115/IMECE2012-89500

Abstract

View Articletitled, Evaluating TRIZ as a Provider of Provocative Stimuli

PDF

Topics: Engineers , Patents , Performance , Product design

Shopfoil: Design of Unoptimized Airfoils

Zachary G. Napolillo, Shanti D. Hamburg, Patrick H. Browning, Wade W. Huebsch, Jay Wilhelm, Mridul Gautam

IMECE 2012; 451-458https://doi.org/10.1115/IMECE2012-89558

Abstract

View Articletitled, Shopfoil: Design of Unoptimized Airfoils

PDF

Topics: Airfoils , Design , Manufacturing , Approximation , Cross section (Physics) , Optimization , Projectiles

Toward a Multi-Objective, Multi-Level Optimization Based Engineering Decision Tool

Adam J. Shuttleworth, Atul Kelkar

IMECE 2012; 459-466https://doi.org/10.1115/IMECE2012-89671

Abstract

View Articletitled, Toward a Multi-Objective, Multi-Level Optimization Based Engineering Decision Tool

PDF

Topics: Computer software , Computer-aided engineering , Cycles , Design , Optimization , Product design , Product development

Function and Mechanism Formalization in Task Based Conceptual Design Method

H. V. Darbinyan

IMECE 2012; 467-478https://doi.org/10.1115/IMECE2012-90006

Abstract

View Articletitled, Function and Mechanism Formalization in Task Based Conceptual Design Method

PDF

Topics: Conceptual design , Design , Visualization , Databases , Design engineering , Design methodology

Energy Equipment Design, Manufacturing Technologies, Costs and Reliability

Drilling Riser System Design in Deepwater Environment

Nam-Sub Woo, Young-Ju Kim, Jae-Ki Kwon, Sang-Shik Kim, Sang-Woong Yun, Byung-Woo Kim

IMECE 2012; 479-484https://doi.org/10.1115/IMECE2012-86225

Abstract

View Articletitled, Drilling Riser System Design in Deepwater Environment

PDF

Topics: Design , Pipeline risers , Drilling , Drillships , Dynamic analysis , Ocean engineering , Oil wells , Uncertainty , Water

Wave Energy Extraction Maximization Using Direct Transcription

James T. Allison, Allen Kaitharath, Daniel R. Herber

IMECE 2012; 485-495https://doi.org/10.1115/IMECE2012-86619

Abstract

View Articletitled, Wave Energy Extraction Maximization Using Direct Transcription

PDF

Topics: Cylinders , Design , Doors , Energy generation , Ocean waves , Optimal control , Wave energy , Wave energy converters

The Effect of Surface Enhancement on Improving the Fatigue and Sour Service Performance of Downhole Tubular Components

Jeremy E. Scheel, Douglas J. Hornbach

IMECE 2012; 497-504https://doi.org/10.1115/IMECE2012-87482

Abstract

View Articletitled, The Effect of Surface Enhancement on Improving the Fatigue and Sour Service Performance of Downhole Tubular Components

PDF

Topics: Cracking (Materials) , Fatigue , Fracture (Process) , Plasticity , Stress

Buckling Analysis of Drill Strings in Inclined Wellbores Using the Explicit Finite Element Method

Mehdi Hajianmaleki, Jeremy S. Daily, Lev Ring, Raju Gandikota

IMECE 2012; 505-512https://doi.org/10.1115/IMECE2012-89638

Abstract

View Articletitled, Buckling Analysis of Drill Strings in Inclined Wellbores Using the Explicit Finite Element Method

PDF

Topics: Buckling , Drill strings , Finite element methods , Finite element analysis , Stress , Weight (Mass) , Engineering simulation , Simulation , Buoyancy , Computer software

Design and Fabrication of Composite Wind Blades for a 5kW Wind Power System

T. Y. Kam

IMECE 2012; 513-518https://doi.org/10.1115/IMECE2012-89877

Abstract

View Articletitled, Design and Fabrication of Composite Wind Blades for a 5kW Wind Power System

PDF

Topics: Blades , Composite materials , Design , Manufacturing , Wind , Wind energy systems , Buckling , Failure , Failure mechanisms , Finite element analysis

Fiber Reinforced Composites: Fabrication, Characterization and Modeling

New Type of Transmission Screw Nuts With Structure of Steel-Backing/Self-Lubrication Composite Lining

Yousong Sun, Xianhui Zhou, Yongqi Cheng, Liangmo Wei, Chunmei Li

IMECE 2012; 519-524https://doi.org/10.1115/IMECE2012-85348

Abstract

View Articletitled, New Type of Transmission Screw Nuts With Structure of Steel-Backing/Self-Lubrication Composite Lining

PDF

Topics: Composite materials , Friction , Linings (Textiles) , Lubrication , Screws , Steel

Optimization of Low-Velocity Impact Properties of E-Glass/Epoxy Composites Using Plasticizing Modifiers

M. M. Rahman, N. Jahan, S. Zainuddin, M. V. Hosur, S. Jeelani, Ashok Kumar

IMECE 2012; 525-532https://doi.org/10.1115/IMECE2012-85411

Abstract

View Articletitled, Optimization of Low-Velocity Impact Properties of E-Glass/Epoxy Composites Using Plasticizing Modifiers

PDF

Topics: Composite materials , Epoxy resins , Glass , Optimization , Epoxy adhesives , Bending (Stress) , Absorption , Chemical reactions , Ductility , Energy levels (Quantum mechanics)

Biomechanics Investigation of Skillful Technician in Hand Lay Up Fabrication Method

Tetsuo Kikuchi, Takuji Koyanagi, Hiroyuki Hamada, Asami Nakai, Yuka Takai, Akihiko Goto, Yoshimichi Fujii, Chieko Narita, Atsushi Endo, Tetsushi Koshino

IMECE 2012; 533-539https://doi.org/10.1115/IMECE2012-86270

Abstract

View Articletitled, Biomechanics Investigation of Skillful Technician in Hand Lay Up Fabrication Method

PDF

Topics: Biomechanics , Manufacturing , Finishing , Molding , Touch (physiological) , Composite materials , Fiber reinforced plastics , Shapes , Sports

Comparison of Two Approaches to Model Cure-Induced Microcracking in Three-Dimensional Woven Composites

Igor Tsukrov, Michael Giovinazzo, Kateryna Vyshenska, Harun Bayraktar, Jon Goering, Todd Gross

IMECE 2012; 541-546https://doi.org/10.1115/IMECE2012-86395

Abstract

View Articletitled, Comparison of Two Approaches to Model Cure-Induced Microcracking in Three-Dimensional Woven Composites

PDF

Topics: Woven composites , Hardening (Curing) , Composite materials , Engineering simulation , Finite element model , Geometry , Residual stresses , Simulation , Textiles , Carbon fibers

Bending Properties and Finite Element Modeling of Biaxial Weft Knitted Composites

O. Demircan, Y. Hamada, T. Kosui, A. Nakai, H. Hamada

IMECE 2012; 547-551https://doi.org/10.1115/IMECE2012-87151

Abstract

View Articletitled, Bending Properties and Finite Element Modeling of Biaxial Weft Knitted Composites

PDF

Topics: Composite materials , Finite element analysis , Modeling , Glass , Finite element methods , Construction , Fibers , Materials properties , Mechanical properties , Textiles

Three-Dimensional Micromechanical Modeling of Continuous Fiber Reinforced Ceramic Composites With Interfaces

V. Bheemreddy, L. Dharani, K. Chandrashekhara, G. Hilmas, W. Fahrenholtz

IMECE 2012; 553-562https://doi.org/10.1115/IMECE2012-88260

Abstract

View Articletitled, Three-Dimensional Micromechanical Modeling of Continuous Fiber Reinforced Ceramic Composites With Interfaces

PDF

Topics: Composite materials , Fiber reinforced ceramics , Modeling , Fibers , Damage , Elasticity , Finite element model , Fracture (Materials) , High temperature

Impact Characterization of Polyurethane Composites Manufactured Using Vacuum Assisted Resin Transfer Molding

M. Mohamed, R. R. Vuppalapati, S. Hawkins, K. Chandrashekhara, T. Schuman

IMECE 2012; 563-570https://doi.org/10.1115/IMECE2012-88267

Abstract

View Articletitled, Impact Characterization of Polyurethane Composites Manufactured Using Vacuum Assisted Resin Transfer Molding

PDF

Topics: Composite materials , Finite element analysis , Glass fiber reinforced composites , Resins , Simulation , Transfer molding , Urethane elastomers , Vacuum

Finite Element-Based Brownian Dynamics Simulation of Nano-Fiber Suspensions in Nano-Composites Processing Using Monte-Carlo Method

Dongdong Zhang, Douglas E. Smith

IMECE 2012; 571-580https://doi.org/10.1115/IMECE2012-88491

Abstract

View Articletitled, Finite Element-Based Brownian Dynamics Simulation of Nano-Fiber Suspensions in Nano-Composites Processing Using Monte-Carlo Method

PDF

Topics: Dynamics (Mechanics) , Fibers , Finite element methods , Nanocomposites , Nanofibers , Polymers , Simulation

Multiscale Modelling of Non-Crimp Fabric Composites

L. E. Asp, E. Marklund, J. Varna, R. Olsson

IMECE 2012; 581-590https://doi.org/10.1115/IMECE2012-89236

Abstract

View Articletitled, Multiscale Modelling of Non-Crimp Fabric Composites

PDF

Topics: Composite materials , Modeling , Textiles , Compressive strength , Damage , Failure , Fibers , Multiscale modeling

Characterization of Physical Properties for Multi-Scale Polymer Composites Under Various Processing Conditions

Anne C. Lederer, David I. Bigio, Hugh A. Bruck, Betel T. Sime, Harry R. Brown, II, Graeme M. Fukuda

IMECE 2012; 591-597https://doi.org/10.1115/IMECE2012-89830

Abstract

View Articletitled, Characterization of Physical Properties for Multi-Scale Polymer Composites Under Various Processing Conditions

PDF

Topics: Polymer composites , Composite materials , Fillers (Materials) , Microscale devices , Nanoscale phenomena , Mechanical properties , Physics

Synthesis of Carbon Nanostructures by Thermo-Mechanical Means

David Barber, H. A. Calderón, Julio Quintero, Francisco C. Robles Hernandez

IMECE 2012; 599-600https://doi.org/10.1115/IMECE2012-89866

Abstract

View Articletitled, Synthesis of Carbon Nanostructures by Thermo-Mechanical Means

PDF

Topics: Carbon , Nanostructures , Thermomechanics , Transition metals , Composite materials , Fullerenes , Milling , Sintering , Soot , Carbon nanotubes

Fracture and Damage: Nano to Macro Scale

Comparative Evaluation of Fatigue Assessment Techniques on a Forged Steel Crankshaft of a Single Cylinder Diesel Engine

Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase

IMECE 2012; 601-609https://doi.org/10.1115/IMECE2012-85493

Abstract

View Articletitled, Comparative Evaluation of Fatigue Assessment Techniques on a Forged Steel Crankshaft of a Single Cylinder Diesel Engine

PDF

Topics: Cylinders , Diesel engines , Fatigue , Steel , Stress , Failure , Fracture (Materials) , Fracture mechanics , Internal combustion engines , Computer software

Estimation of Long-Term Creep Rupture Life of T91 Alloy Superheater Tube in the Presence of Steam-Side Oxide Scales

Junlin Huang, Keyi Zhou, Jianqun Xu, Xiaohu Xu

IMECE 2012; 611-618https://doi.org/10.1115/IMECE2012-85804

Abstract

View Articletitled, Estimation of Long-Term Creep Rupture Life of T91 Alloy Superheater Tube in the Presence of Steam-Side Oxide Scales

PDF

Topics: Alloys , Creep , Rupture , Steam , Superheaters , Probability , Temperature , Flow (Dynamics) , Bearings , Coal

Stress Singularity Analysis of a Viscoelastic/Viscoelastic Bonded Joint

M. A. K. Chowdhuri, Z. Xia

IMECE 2012; 619-625https://doi.org/10.1115/IMECE2012-86372

Abstract

View Articletitled, Stress Singularity Analysis of a Viscoelastic/Viscoelastic Bonded Joint

PDF

Topics: Bonding , Stress singularity , Viscoelastic materials

Characterisation of Fatigue Crack Growth in Silicone for DEAP Technology

Thor Thorup

IMECE 2012; 627-634https://doi.org/10.1115/IMECE2012-87238

Abstract

View Articletitled, Characterisation of Fatigue Crack Growth in Silicone for DEAP Technology

PDF

Topics: Fatigue cracks , Silicones , Fracture (Materials) , Cycles , Silicone rubber , Crack propagation , Dielectric materials , Stress , Surface roughness

Correlation of Tensile Properties of Pressure Vessel Steels by Shear Punch and Small Punch Test Methods

Raghu V. Prakash, T. Ramesh, N. Raju, S. Suresh

IMECE 2012; 635-640https://doi.org/10.1115/IMECE2012-87691

Abstract

View Articletitled, Correlation of Tensile Properties of Pressure Vessel Steels by Shear Punch and Small Punch Test Methods

PDF

Topics: Pressure vessels , Shear (Mechanics) , Steel , Tensile strength , Stress , ASTM International , Disks , Displacement , Mechanical properties , Shapes

Investigation of Size Scale Effects on the Fatigue Crack Growth Characteristics of an Aluminum Alloy

Raghu V. Prakash, S. Satheesh Kumar

IMECE 2012; 641-648https://doi.org/10.1115/IMECE2012-87717

Abstract

View Articletitled, Investigation of Size Scale Effects on the Fatigue Crack Growth Characteristics of an Aluminum Alloy

PDF

Topics: Aluminum alloys , Fatigue cracks , Stress , Fracture (Materials) , ASTM International , Crack propagation , Life extension , Pipelines , Polynomials , Pressure vessels

The Inter-Laminar Fracture and Mechanical Behavior of Nano-Alumina Modified Glass Fiber/ Epoxy Composite

Mathew John, Raghu V. Prakash, Raman Velmurugan

IMECE 2012; 649-656https://doi.org/10.1115/IMECE2012-87791

Abstract

View Articletitled, The Inter-Laminar Fracture and Mechanical Behavior of Nano-Alumina Modified Glass Fiber/ Epoxy Composite

PDF

Topics: Composite materials , Epoxy resins , Fracture (Materials) , Glass fibers , Mechanical behavior , Fracture toughness , Laminates , Glass reinforced plastics , Particulate matter , Absorption

The Role of Strength in Determining Composite Material Toughness Using the Interface Indentation Fracture Test

Brian A. Grimm, John P. Parmigiani

IMECE 2012; 657-661https://doi.org/10.1115/IMECE2012-88004

Abstract

View Articletitled, The Role of Strength in Determining Composite Material Toughness Using the Interface Indentation Fracture Test

PDF

Topics: Composite materials , Fracture (Materials) , Fracture toughness , Deflection , Brittleness , Finite element model , Testing

Methods to Determine the Critical Damage Criterion of the Kachanov-Rabotnov Law

Calvin M. Stewart, Ali P. Gordon

IMECE 2012; 663-670https://doi.org/10.1115/IMECE2012-88389

Abstract

View Articletitled, Methods to Determine the Critical Damage Criterion of the Kachanov-Rabotnov Law

PDF

Topics: Creep , Damage , Damage mechanics

Fundamentals of Contact and Friction

A Noise Evaluation Based Wiener Deconvolution Method for Contact Parameters Measurement Using Ultrasound

Fei Du, Jun Hong, Baotong Li, Zeng Luo, Shaofeng Wang, Ying Xu

IMECE 2012; 671-676https://doi.org/10.1115/IMECE2012-86445

Abstract

View Articletitled, A Noise Evaluation Based Wiener Deconvolution Method for Contact Parameters Measurement Using Ultrasound

PDF

Topics: Filters , Noise (Sound) , Ultrasound

Finite Element Modeling of the Elastic-Plastic Contact Between Two Rough Surfaces

Guoqing Yang, Jun Hong, Linbo Zhu, Shaofeng Wang, Meihua Xiong, Guoqing Yang

IMECE 2012; 677-683https://doi.org/10.1115/IMECE2012-86522

Abstract

View Articletitled, Finite Element Modeling of the Elastic-Plastic Contact Between Two Rough Surfaces

PDF

Topics: Finite element analysis , Finite element methods , Modeling , Stiffness , Surface roughness

The Slippage Analysis at Bearing Surface of Bolted Joints due to Cyclic Transverse Loads

Linbo Zhu, Jun Hong, Guoqing Yang, Baotong Li, Zhaohui Yang

IMECE 2012; 685-690https://doi.org/10.1115/IMECE2012-86808

Abstract

View Articletitled, The Slippage Analysis at Bearing Surface of Bolted Joints due to Cyclic Transverse Loads

PDF

Topics: Bearings , Bolted joints , Stress

Friction on Tool/Chip Interface in Nanometric Machining of Copper

Chunhui Ji, Annie Tangpong, Yachao Wang, Jing Shi, Zhanqiang Liu

IMECE 2012; 691-699https://doi.org/10.1115/IMECE2012-87008

Abstract

View Articletitled, Friction on Tool/Chip Interface in Nanometric Machining of Copper

PDF

Topics: Copper , Cutting , Friction , Machining

A Numerical Simulation of Interfacial Slip and its Role in Friction

Jeffrey L. Streator

IMECE 2012; 701-704https://doi.org/10.1115/IMECE2012-89693

Abstract

View Articletitled, A Numerical Simulation of Interfacial Slip and its Role in Friction

PDF

Topics: Computer simulation , Friction , Slabs , Stiction , Surface roughness , Displacement , Geometry , Plane strain , Pressure , Shear stress

Information Centric Engineering (ICE)

A Sensor Model for Enhancement of Manufacturing Equipment Data Interoperability

Kang B. Lee, Eugene Y. Song, Peter S. Gu

IMECE 2012; 705-712https://doi.org/10.1115/IMECE2012-88726

Abstract

View Articletitled, A Sensor Model for Enhancement of Manufacturing Equipment Data Interoperability

PDF

Topics: Production equipment , Sensors

Innovations in Processing, Characterization and Applications of Bioengineered, Electronic, and Nano-Materials

Pulsed Laser Deposition and Biocompatibility of Titanium Nitride Coatings

Talisha M. Haywood, Kwadwo M. Darkwa, Ram K. Gupta, Dhananjay Kumar

IMECE 2012; 713-716https://doi.org/10.1115/IMECE2012-86330

Abstract

View Articletitled, Pulsed Laser Deposition and Biocompatibility of Titanium Nitride Coatings

PDF

Topics: Biocompatibility , Coatings , Pulsed laser deposition , Stainless steel , Titanium

Fabrication and Characterization of Hydroxyapatite-Magnesium Composite Thin Films on Magnesium Plates for Implant Applications

Kwadwo Mensah-Darkwa, Ram K. Gupta, Dhananjay Kumar

IMECE 2012; 717-722https://doi.org/10.1115/IMECE2012-86918

Abstract

View Articletitled, Fabrication and Characterization of Hydroxyapatite-Magnesium Composite Thin Films on Magnesium Plates for Implant Applications

PDF

Topics: Composite materials , Corrosion , Magnesium (Metal) , Manufacturing , Plates (structures) , Pulsed laser deposition , Thin films

Predicting the Quality of One-Dimensional Periodic Micro and Nano Structures Fabricated via Wrinkling

Sourabh K. Saha, Martin L. Culpepper

IMECE 2012; 723-729https://doi.org/10.1115/IMECE2012-87081

Abstract

View Articletitled, Predicting the Quality of One-Dimensional Periodic Micro and Nano Structures Fabricated via Wrinkling

PDF

Topics: Nanostructures , Density , Manufacturing , Buckling , Compression , Dislocations , Finite element model , Materials properties , Surface cracks , Thin films

Application of Magnesium Oxide Functional Coating for Controlling the Corrosion of Magnesium for Implant Applications

Rubenv Kotoka, Ashlyn Worthy, Erica Clinard, Devdas Pai, Jag Sankar, Sergey Yarmolenko

IMECE 2012; 731-735https://doi.org/10.1115/IMECE2012-87579

Abstract

View Articletitled, Application of Magnesium Oxide Functional Coating for Controlling the Corrosion of Magnesium for Implant Applications

PDF

Topics: Coatings , Corrosion , Density , Electrolytic corrosion , Magnesium (Metal) , Sputtering (Irradiation)

Improving Corrosion Fatigue and Damage Performance of 410 Stainless Steel via LPB

Douglas J. Hornbach, Jeremy E. Scheel

IMECE 2012; 737-744https://doi.org/10.1115/IMECE2012-87888

Abstract

View Articletitled, Improving Corrosion Fatigue and Damage Performance of 410 Stainless Steel via LPB

PDF

Topics: Corrosion , Damage , Fatigue , Plasticity , Stainless steel , Stress

The Effects of T4 and T6 Heat Treatment on the Corrosion Behavior of MgZnCa Alloys

Christopher Smith, Zhigang Xu, Jagannathan Sankar

IMECE 2012; 745-759https://doi.org/10.1115/IMECE2012-88196

Abstract

View Articletitled, The Effects of T4 and T6 Heat Treatment on the Corrosion Behavior of MgZnCa Alloys

PDF

Topics: Alloys , Corrosion , Heat treating (Metalworking) , Biomaterials , Biomedicine , Corrosion resistance , Mechanical properties , Casting , Electrochemical analysis , Heat

Influence of Microstructure on Crack Susceptibility of Large Chilled Iron Mill Rolls

Pasquale Russo Spena, Manuela De Maddis, Franco Lombardi

IMECE 2012; 761-772https://doi.org/10.1115/IMECE2012-89436

Abstract

View Articletitled, Influence of Microstructure on Crack Susceptibility of Large Chilled Iron Mill Rolls

PDF

Topics: Fracture (Materials) , Iron and steel mill construction , Casting , Graphite , Solidification , Numerical analysis , Stress , Cooling , Cracking (Materials) , Fracture (Process)

Vortex Tube Impact on Cooling Milling Machining

Basel Alsayyed, Mohammad O. Hamdan, Saud Aldajah

IMECE 2012; 773-776https://doi.org/10.1115/IMECE2012-89885

Abstract

View Articletitled, Vortex Tube Impact on Cooling Milling Machining

PDF

Topics: Coolants , Cooling , Cutting , Machining , Milling , Temperature , Vortices

Joining Technologies for Advanced Materials in Systems and Structures

Bolted Joints Modeling Techniques, Analytical, Stochastic and FEA Comparison

Yosef Amir, S. Govindarajan, Saravanakumar Iyyanar

IMECE 2012; 777-788https://doi.org/10.1115/IMECE2012-85055

Abstract

View Articletitled, Bolted Joints Modeling Techniques, Analytical, Stochastic and FEA Comparison

PDF

Topics: Bolted joints , Finite element analysis , Modeling , Failure mechanisms , Design , Simulation , Friction , Statistical distributions

Equivalent Axial Stiffness of Bolt Heads Subjected to Axial Loading

Yosef Amir, Douglas Grant, Andrew Triscari

IMECE 2012; 789-800https://doi.org/10.1115/IMECE2012-85150

Abstract

View Articletitled, Equivalent Axial Stiffness of Bolt Heads Subjected to Axial Loading

PDF

Topics: Stiffness , Cylinders , Tension , Bearings , Bolted joints , Boundary-value problems , Cross section (Physics) , Flanges , Stress

Nonlinear Vibration Response Analysis on a Composite Plate Reinforced With Carbon Nanotubes

Xiang-Ying Guo, Wei Zhang, Qian Wang

IMECE 2012; 801-809https://doi.org/10.1115/IMECE2012-85856

Abstract

View Articletitled, Nonlinear Vibration Response Analysis on a Composite Plate Reinforced With Carbon Nanotubes

PDF

Topics: Carbon nanotubes , Composite materials , Nonlinear vibration

Effects of Residual Stresses and the Post Weld Heat Treatments of TIG Welded Aluminum Alloy AA6061-T651

Mohammad W. Dewan, Jiandong Liang, M. A. Wahab, Ayman M. Okeil

IMECE 2012; 811-820https://doi.org/10.1115/IMECE2012-85889

Abstract

View Articletitled, Effects of Residual Stresses and the Post Weld Heat Treatments of TIG Welded Aluminum Alloy AA6061-T651

PDF

Topics: Aluminum alloys , Heat , Residual stresses , Microhardness , Grain size , Tensile strength , Ultrasonic testing , Corrosion resistance , Drilling , Failure

Improvement of Corrosion Resistance on a Low Carbon Steel 1018 in 3.5% NaCl Solution by Electrolytic-Plasma-Process (EPP)

Jiandong Liang, Naser I. Hossain, Muhammad A. Wahab, Shengmin Guo

IMECE 2012; 821-825https://doi.org/10.1115/IMECE2012-85919

Abstract

View Articletitled, Improvement of Corrosion Resistance on a Low Carbon Steel 1018 in 3.5% NaCl Solution by Electrolytic-Plasma-Process (EPP)

PDF

Topics: Carbon steel , Corrosion resistance , Plasmas (Ionized gases) , Corrosion , Steel , Corrosion protection , Melting , Metal surfaces , Quenching (Metalworking) , Scanning electron microscopy

Effects of Bubble Growth and Solidification Rate on Pore Formation in Solid

P. S. Wei, S. Y. Hsiao

IMECE 2012; 827-830https://doi.org/10.1115/IMECE2012-85922

Abstract

View Articletitled, Effects of Bubble Growth and Solidification Rate on Pore Formation in Solid

PDF

Topics: Bubbles , Solidification , Shapes

The Effect of Damage on the Bonding Strength of Hybrid T-Joint Structures

P. C. Yeh, P. Y. Chang, J. M. Yang, D. Kordonowy

IMECE 2012; 831-838https://doi.org/10.1115/IMECE2012-85924

Abstract

View Articletitled, The Effect of Damage on the Bonding Strength of Hybrid T-Joint Structures

PDF

Topics: Bonding , Damage , Preforms , Aircraft , Composite materials , Glass fibers , Aluminum , Carbon composites , Carbon fibers , Flanges

Friction Characteristics in Light Weight Design Focusing Bolted Joints

H. Kopfer, C. Friedrich, M. De Agostinis, D. Croccolo

IMECE 2012; 839-846https://doi.org/10.1115/IMECE2012-85940

Abstract

View Articletitled, Friction Characteristics in Light Weight Design Focusing Bolted Joints

PDF

Topics: Bolted joints , Design , Friction , Tribology , Weight (Mass)

Laser Transmission Welding of Transparent Thermoplastics Microfluidic Devices

Ming Ying, Guijun Bi, Jun Wei, Paramasivam S/O Ramachandra

IMECE 2012; 847-852https://doi.org/10.1115/IMECE2012-86234

Abstract

View Articletitled, Laser Transmission Welding of Transparent Thermoplastics Microfluidic Devices

PDF

Topics: Lasers , Microfluidics , Transparency , Welding , Bonding , Absorbents , Displacement , Finite element analysis , Joining , Laser beams

The Absolute Evaluation and Loosening Life Prediction Method on Self-Loosening of Bolted Joints During Actual Machine Operation

Soichi Hareyama, Ken-ichi Manabe, Makoto Nakashima

IMECE 2012; 853-864https://doi.org/10.1115/IMECE2012-86415

Abstract

View Articletitled, The Absolute Evaluation and Loosening Life Prediction Method on Self-Loosening of Bolted Joints During Actual Machine Operation

PDF

Topics: Bolted joints , Machinery , Tension , Damage , Adhesives , Cycles , Fatigue life , Forklifts , Locks (Waterways) , Lubrication

Engineering Calculation of Threaded Fastening Systems Considering Deviations in Advanced Design

C. Friedrich, H. Hubbertz

IMECE 2012; 865-871https://doi.org/10.1115/IMECE2012-86898

Abstract

View Articletitled, Engineering Calculation of Threaded Fastening Systems Considering Deviations in Advanced Design

PDF

Topics: Design , Bolted joints , Machine components , Carbon reinforced plastics , Economics , Failure , Fasteners , Mechanical behavior , Product design , Stress

Stress Analysis and Sealing Performance Evaluation in Bolted Flange Connections With Ring Joint Gasket Subjected to Internal Pressure

Koji Kondo, Shota Tsubaki, Toshiyuki Sawa, Koji Sato, Yuya Omiya

IMECE 2012; 873-882https://doi.org/10.1115/IMECE2012-87393

Abstract

View Articletitled, Stress Analysis and Sealing Performance Evaluation in Bolted Flange Connections With Ring Joint Gasket Subjected to Internal Pressure

PDF

Topics: Bolted flanges , Gaskets , Performance evaluation , Pressure , Sealing (Process) , Stress analysis (Engineering) , Fluids , Leakage , Metals , Stress

Aging Mechanism of Welded Joints of P92 Steels

Changzheng Huang, Cliff Yi Guo, Jun Liang, Jinfeng Du

IMECE 2012; 883-887https://doi.org/10.1115/IMECE2012-87497

Abstract

View Articletitled, Aging Mechanism of Welded Joints of P92 Steels

PDF

Topics: Steel , Welded joints , Alloys , Failure , Fracture (Materials) , Grain boundaries , Heat treating (Metalworking) , Particulate matter , Power stations , Temperature

Thermochemical Compatibility and Optical Properties of Gd2Zr2O7 and YSZ for Thermal Barrier Coatings

Li Wang, Peigen Zhang, M. H. Habibi, S. M. Guo, Jeffrey I. Eldridge

IMECE 2012; 889-893https://doi.org/10.1115/IMECE2012-88210

Abstract

View Articletitled, Thermochemical Compatibility and Optical Properties of Gd2Zr2O7 and YSZ for Thermal Barrier Coatings

PDF

Topics: Ceramic coatings , Coatings , Diffusion (Physics) , Failure , Gadolinium , Gas turbines , Heat , Heat treating (Metalworking) , Phase transitions , Plasmas (Ionized gases)

A Comprehensive Model for Predicting Fatigue Life of Laser Welded Lap Joint of Galvanized High Strength Steel as a Function of Residual Stresses

Joe Anago, Fanrong Kong, Blair Carlson, Radovan Kovacevic

IMECE 2012; 895-903https://doi.org/10.1115/IMECE2012-88318

Abstract

View Articletitled, A Comprehensive Model for Predicting Fatigue Life of Laser Welded Lap Joint of Galvanized High Strength Steel as a Function of Residual Stresses

PDF

Topics: Fatigue life , High strength steel , Lasers , Residual stresses , Stress , Finite element model , Fatigue strength , Temperature , Cycles , Computer simulation

An Investigation on Hot Corrosion Resistance of Plasma Sprayed Composite YSZ-Gd₂Zr₂O₇ and Gd₂Zr₂O₇ Thermal Barrier Coatings in Simulated Turbine Environment at 1050°C

M. H. Habibi, Li Wang, Shengmin Guo

IMECE 2012; 905-911https://doi.org/10.1115/IMECE2012-88435

Abstract

View Articletitled, An Investigation on Hot Corrosion Resistance of Plasma Sprayed Composite YSZ-Gd2Zr2O7 and Gd2Zr2O7 Thermal Barrier Coatings in Simulated Turbine Environment at 1050°C

PDF

Topics: Composite materials , Corrosion resistance , Plasmas (Ionized gases) , Thermal barrier coatings , Turbines , Zirconium , Coatings , Ceramics , Gas turbines , High temperature

FEM Analysis of the Effects of Cooling Techniques on the Microstructure of Aluminum 7075 Friction Stir Welded Joints

A. H. Kheireddine, A. H. Ammouri, R. F. Hamade, G. T. Kridli

IMECE 2012; 913-917https://doi.org/10.1115/IMECE2012-88943

Abstract

View Articletitled, FEM Analysis of the Effects of Cooling Techniques on the Microstructure of Aluminum 7075 Friction Stir Welded Joints

PDF

Topics: Aluminum , Cooling , Finite element methods , Finite element model , Friction , Welded joints , Welding

Mitigation of Pore Generation in Laser Welding of Magnesium Alloy AZ31B in Lap Joint Configuration

Masoud Harooni, Fanrong Kong, Blair Carlson, Radovan Kovacevic

IMECE 2012; 919-927https://doi.org/10.1115/IMECE2012-89073

Abstract

View Articletitled, Mitigation of Pore Generation in Laser Welding of Magnesium Alloy AZ31B in Lap Joint Configuration

PDF

Topics: Laser welding , Magnesium alloys

A Hybrid Metal-to-Composite Joint Fabricated Through Additive Manufacturing Processes

Thomas J. Whitney, Thao Gibson, Khalid Lafdi, Brian Welk

IMECE 2012; 929-932https://doi.org/10.1115/IMECE2012-89540

Abstract

View Articletitled, A Hybrid Metal-to-Composite Joint Fabricated Through Additive Manufacturing Processes

PDF

Topics: Additive manufacturing , Composite materials , Metals , Stress , Aerospace industry , Biomedicine , Carbon , Design , Engineering prototypes , Graphite

Lightweight Design and Manufacturing of Aerospace and Transportation Applications

Theory of Continuously Variable Transmission With Two Degrees of Freedom: Paradox of Mechanics

Konstantin S. Ivanov

IMECE 2012; 933-942https://doi.org/10.1115/IMECE2012-85762

Abstract

View Articletitled, Theory of Continuously Variable Transmission With Two Degrees of Freedom: Paradox of Mechanics

PDF

Topics: Degrees of freedom

Integration of Carbon Fiber Composite Materials Into Air-Cooled Reciprocating Piston Engines for UAV Applications

Mark Trunzo, Joel Schubbe, Stephen M. Graham, Patrick Caton

IMECE 2012; 943-956https://doi.org/10.1115/IMECE2012-87607

Abstract

View Articletitled, Integration of Carbon Fiber Composite Materials Into Air-Cooled Reciprocating Piston Engines for UAV Applications

PDF

Topics: Carbon fibers , Composite materials , Piston engines , Unmanned aerial vehicles , Engines , Weight (Mass) , Stress , Aircraft , Bearings , Cycles

Development of the Strength Evaluation Method for Body of Mining Dump Truck Under Actual Operations

Yasuki Kita, Takayuki Satou, Atsushi Kitaguchi, Takashi Sasaki

IMECE 2012; 957-966https://doi.org/10.1115/IMECE2012-88951

Abstract

View Articletitled, Development of the Strength Evaluation Method for Body of Mining Dump Truck Under Actual Operations

PDF

Topics: Evaluation methods , Mining , Trucks , Stress , Soil , Flow (Dynamics) , Pressure , Welded joints , Finite element model , Time series

A System Level Analysis of the Framework and Feasibility for Dual Air and Road Mode Vehicle

Siddhartha Jetti, Vahid Motevalli

IMECE 2012; 967-976https://doi.org/10.1115/IMECE2012-89205

Abstract

View Articletitled, A System Level Analysis of the Framework and Feasibility for Dual Air and Road Mode Vehicle

PDF

Topics: Roads , Vehicles , Aircraft , Security , Transportation systems , Wings , Air traffic control , Airfoils , Design , Fuels

Lubrication: Fundamentals and Applications

Effect of Turbulence and Offset Loading on the Performance of a Single Pad Externally Adjustable Fluid Film Bearing

B. Satish Shenoy, Rammohan S. Pai B., Raghuvir Pai B., Shrikanth Rao D.

IMECE 2012; 977-983https://doi.org/10.1115/IMECE2012-85760

Abstract

View Articletitled, Effect of Turbulence and Offset Loading on the Performance of a Single Pad Externally Adjustable Fluid Film Bearing

PDF

Topics: Bearings , Fluid films , Turbulence

Optimized Cage Design for Increasing the Life of Solid Lubricated Roller Bearings

Matthias Marquart, Bernd Sauer

IMECE 2012; 985-993https://doi.org/10.1115/IMECE2012-86239

Abstract

View Articletitled, Optimized Cage Design for Increasing the Life of Solid Lubricated Roller Bearings

PDF

Topics: Design , Roller bearings , Bearings , Friction , Geometry , High temperature , Lubricants , Machine components , Vacuum , Computer software

Effects of Parallel Misalignment on Performance of Hydrodynamic-Rolling Hybrid Bearing

Dun Lu, Bingheng Lu, Jun Zhang, Kejia Liu

IMECE 2012; 995-1002https://doi.org/10.1115/IMECE2012-86262

Abstract

View Articletitled, Effects of Parallel Misalignment on Performance of Hydrodynamic-Rolling Hybrid Bearing

PDF

Topics: Bearings , Equilibrium (Physics) , Rolling bearings , Machining , Clearances (Engineering) , Design , Errors , Rotors , Stress

Effect of Velocity and Load on the Development of Kinetic Friction at a Lubricated Steel on Polymer Interface

Matthew M. Bunten, Shannon J. Timpe

IMECE 2012; 1003-1008https://doi.org/10.1115/IMECE2012-86991

Abstract

View Articletitled, Effect of Velocity and Load on the Development of Kinetic Friction at a Lubricated Steel on Polymer Interface

PDF

Topics: Polymers , Sliding friction , Steel , Stress , Disks , Friction , Adhesion , Adhesives , Lithium , Lubricants

A Comparative Study of Tribological Behavior of Steel Sliding Against WC Under Mineral and Biodegradable Oil Lubrication

Anup Darshan, UmaMaheshwera Reddy Paturi, Narala Suresh Kumar Reddy, Srinivasa Prakash Regalla

IMECE 2012; 1009-1012https://doi.org/10.1115/IMECE2012-87182

Abstract

View Articletitled, A Comparative Study of Tribological Behavior of Steel Sliding Against WC Under Mineral and Biodegradable Oil Lubrication

PDF

Topics: Biodegradation , Lubrication , Mineral oil , Minerals , Oils , Petroleum , Steel , Tribology , Wear

Design of Short-Pipe Restrictor of Hydrostatic Thrust Bearings

Yohichi Nakao, Shota Nakatsugawa, Masataka Komori, Kenji Suzuki

IMECE 2012; 1013-1020https://doi.org/10.1115/IMECE2012-87306

Abstract

View Articletitled, Design of Short-Pipe Restrictor of Hydrostatic Thrust Bearings

PDF

Topics: Design , Hydrostatics , Pipes , Thrust bearings , Bearings , Stiffness , Machine components , Machine tools , Machinery , Stress

The Influence of Piezo-Viscous Lubricants on EHL Line and Point Contact Problems

V. D’Agostino, V. Petrone, A. Senatore

IMECE 2012; 1021-1031https://doi.org/10.1115/IMECE2012-87411

Abstract

View Articletitled, The Influence of Piezo-Viscous Lubricants on EHL Line and Point Contact Problems

PDF

Topics: Contact mechanics , Lubricants , Pressure , Film thickness , Shear (Mechanics) , Viscosity , Fluids , Shapes , Compressibility , Deformation

Extended Finite Element Analysis of Journal Bearing Dynamic Forced Performance to Include Fluid Inertia Force Coefficients

Luis San Andrés

IMECE 2012; 1033-1041https://doi.org/10.1115/IMECE2012-87713

Abstract

View Articletitled, Extended Finite Element Analysis of Journal Bearing Dynamic Forced Performance to Include Fluid Inertia Force Coefficients

PDF

Topics: Finite element analysis , Fluids , Inertia (Mechanics) , Journal bearings , Bearings , Damping , Pressure , Stiffness , Flow (Dynamics) , Fluid films

Machining — Modeling

Estimation of Residual Stresses and Crater Shape in µ-EDM by Finite Element Method

Jose Mathew, Allesu K., Shravani Srisailam, K. P. Somashekhar, Prakash Naidu P., P. S. Suvin

IMECE 2012; 1043-1046https://doi.org/10.1115/IMECE2012-86100

Abstract

View Articletitled, Estimation of Residual Stresses and Crater Shape in µ-EDM by Finite Element Method

PDF

Topics: Electrical discharge machining , Finite element methods , Residual stresses , Shapes , Electrodes , Fluids , High temperature , Machining , Temperature gradient , Transients (Dynamics)

Finite Element Modeling of Discharge Zone in Micro-EDM Process

Jose Mathew, Deepak G. Dilip, Mathew J. Joseph, Basil Kuriachen

IMECE 2012; 1047-1051https://doi.org/10.1115/IMECE2012-86112

Abstract

View Articletitled, Finite Element Modeling of Discharge Zone in Micro-EDM Process

PDF

Topics: Electrical discharge machining , Finite element analysis , Modeling , Electrodes , Temperature , Titanium alloys , Anodes , Dimensions , Evaporation , Finite element methods

Burr Size Minimization When Drilling 6061-T6 Aluminum Alloy

Y. Zedan, S. A. Niknam, A. Djebara, V. Songmene

IMECE 2012; 1053-1059https://doi.org/10.1115/IMECE2012-86412

Abstract

View Articletitled, Burr Size Minimization When Drilling 6061-T6 Aluminum Alloy

PDF

Topics: Aluminum alloys , Cutting , Design , Drilling , Fluids

Residual Stress Evaluation in Machined Surfaces of Copper by Molecular Dynamic Simulation

Yachao Wang, Chunhui Ji, Jing Shi, Zhanqiang Liu

IMECE 2012; 1061-1069https://doi.org/10.1115/IMECE2012-87005

Abstract

View Articletitled, Residual Stress Evaluation in Machined Surfaces of Copper by Molecular Dynamic Simulation

PDF

Topics: Copper , Cutting , Machining , Molecular dynamics , Molecular dynamics simulation , Nanoscale phenomena , Simulation , Stress

A Strategy for Generating Contoured Surface With Abrasive Waterjet Milling on Ductile Materials

R. Srikanth, N. Ramesh Babu

IMECE 2012; 1071-1077https://doi.org/10.1115/IMECE2012-87807

Abstract

View Articletitled, A Strategy for Generating Contoured Surface With Abrasive Waterjet Milling on Ductile Materials

PDF

Topics: Milling , Alloys , Geometry , Kinematics , Machining , Stainless steel , Titanium alloys , Tool steel

3D Numerical Investigation of Effect of Milling Process Parameters on High Speed Milling of Ti-Al6-V4

J. Ma, Shuting Lei, Huaqi Lu

IMECE 2012; 1079-1083https://doi.org/10.1115/IMECE2012-88235

Abstract

View Articletitled, 3D Numerical Investigation of Effect of Milling Process Parameters on High Speed Milling of Ti-Al6-V4

PDF

Topics: Finite element methods , Milling , Titanium alloys

3D FEM Investigation of the Effects of Nose Radius and Edge Radius on Turning of AISI 4140

J. Ma, Yaowei Yong, Shuting Lei

IMECE 2012; 1085-1089https://doi.org/10.1115/IMECE2012-88333

Abstract

View Articletitled, 3D FEM Investigation of the Effects of Nose Radius and Edge Radius on Turning of AISI 4140

PDF

Topics: Finite element methods , Finite element model , Turning

Implementing a Cohesive Zone Interface in a Diamond-Coated Tool for 2D Cutting Simulations

Feng Qin, Ninggang Shen, Kevin Chou

IMECE 2012; 1091-1098https://doi.org/10.1115/IMECE2012-88640

Abstract

View Articletitled, Implementing a Cohesive Zone Interface in a Diamond-Coated Tool for 2D Cutting Simulations

PDF

Topics: Cutting , Diamonds , Failure , Simulation

Materials Property Characterization

Utilization of Least Square Support Vector Machine (LSSVM) for Electrical Resistivity Prediction of the Zn-Mn-S Nanocrystalline Semiconductor Films

Ali A. Abbasi, M. T. Ahmadian

IMECE 2012; 1099-1104https://doi.org/10.1115/IMECE2012-85028

Abstract

View Articletitled, Utilization of Least Square Support Vector Machine (LSSVM) for Electrical Resistivity Prediction of the Zn-Mn-S Nanocrystalline Semiconductor Films

PDF

Topics: Electrical resistivity , Semiconductor films , Support vector machines , Modeling , Temperature

Study of Creep-Fatigue Interaction in a Prosthetic Socket Below Knee

Muhsin J. Jweeg, Kadhim K. Resan, Mustafa Taraq

IMECE 2012; 1105-1110https://doi.org/10.1115/IMECE2012-85240

Abstract

View Articletitled, Study of Creep-Fatigue Interaction in a Prosthetic Socket Below Knee

PDF

Topics: Artificial limbs , Creep , Fatigue , Knee

A Quantitative Evaluation of the Quality of Recycled Steel in Uganda

C. Senfuka, J. B. Kirabira, J. K. Byaruhanga

IMECE 2012; 1111-1123https://doi.org/10.1115/IMECE2012-85276

Abstract

View Articletitled, A Quantitative Evaluation of the Quality of Recycled Steel in Uganda

PDF

Topics: Steel , Carbon , Diluents , Electromagnetic scattering , Emission spectroscopy , Iron , Mechanical properties , Raw materials , Reliability , Resilience

Critical Entropy Threshold: An Irreversible Thermodynamic Theory of Fatigue

P. W. Whaley

IMECE 2012; 1125-1135https://doi.org/10.1115/IMECE2012-85435

Abstract

View Articletitled, Critical Entropy Threshold: An Irreversible Thermodynamic Theory of Fatigue

PDF

Topics: Entropy , Fatigue , Nonequilibrium thermodynamics , Deformation , Fatigue damage , Aluminum , Density , Failure , Fatigue life , Fatigue properties

Micro-Macro Modeling of Continuous Cast Steel to Simulate the Effect of Casting Velocity and Pouring Temperature on Copper Segregation

A. Mehran Shahhosseini, Malur N. Srinivasan

IMECE 2012; 1137-1144https://doi.org/10.1115/IMECE2012-85463

Abstract

View Articletitled, Micro-Macro Modeling of Continuous Cast Steel to Simulate the Effect of Casting Velocity and Pouring Temperature on Copper Segregation

PDF

Topics: Casting , Copper , Modeling , Steel , Temperature , Solidification , Cooling , Deformation , Diffusion (Physics) , Embrittlement

Thermal Characterization of Aluminum and Steel Foams

James D. Playford, S. Midturi, S. B. Pidugu

IMECE 2012; 1145-1149https://doi.org/10.1115/IMECE2012-85609

Abstract

View Articletitled, Thermal Characterization of Aluminum and Steel Foams

PDF

Topics: Aluminum , Foams (Chemistry) , Steel , Thermal characterization , Thermal conductivity , Metal foams , Heat transfer , Porosity , Aerospace industry , Automobiles

Evaluating the Mechanical Properties of Carbon Fiber Reinforced Polymer Matrix Composite Materials at Room and Elevated Temperatures

Mahdi Farahikia, Sunilbhai Macwan, Fereidoon Delfanian, Zhong Hu

IMECE 2012; 1151-1158https://doi.org/10.1115/IMECE2012-85671

Abstract

View Articletitled, Evaluating the Mechanical Properties of Carbon Fiber Reinforced Polymer Matrix Composite Materials at Room and Elevated Temperatures

PDF

Topics: Carbon reinforced plastics , Composite materials , Mechanical properties , Temperature , Testing , ASTM standards , Shear (Mechanics) , Tensile strength , Aircraft , Compression

Low – Cost, Accelerated High-Cycle Fatigue Testing by Resonant Dwell

P. W. Whaley, L. A. Killingsworth, T. D. Bow

IMECE 2012; 1159-1165https://doi.org/10.1115/IMECE2012-85680

Abstract

View Articletitled, Low – Cost, Accelerated High-Cycle Fatigue Testing by Resonant Dwell

PDF

Topics: High cycle fatigue , Resonance , Testing , Cycles , Fatigue , Fatigue properties , Cantilevers , Fatigue life , Fatigue testing , Machinery

Bolt Bearing Strength of Commingled Boron/Glass Fiber Reinforced Aluminum Laminates

P. C. Yeh, P. Y. Chang, J. M. Yang, P. H. Wu, M. C. Liu

IMECE 2012; 1167-1178https://doi.org/10.1115/IMECE2012-85925

Abstract

View Articletitled, Bolt Bearing Strength of Commingled Boron/Glass Fiber Reinforced Aluminum Laminates

PDF

Topics: Aluminum , Bearings , Boron , Fibers , Glass fibers , Laminates , Metals

Theoretical Research of Thermal Conductivity Model of Metal Rubber Based on the Wire Helix

Yan-Hong Ma, Hong-Wei Lu, Zheng-Dong Ma, Bin Zhu, Jie Hong

IMECE 2012; 1179-1185https://doi.org/10.1115/IMECE2012-85937

Abstract

View Articletitled, Theoretical Research of Thermal Conductivity Model of Metal Rubber Based on the Wire Helix

PDF

Topics: Metals , Rubber , Thermal conductivity , Wire , Heat transfer , Heat , Insulation

Non-Newtonian Behavior Computer Aided Simulation of Metal Matrix Aluminum Alloy

Yaou Wang, Allen R. Miller, K. Kabiri-Bamoradian

IMECE 2012; 1187-1192https://doi.org/10.1115/IMECE2012-86401

Abstract

View Articletitled, Non-Newtonian Behavior Computer Aided Simulation of Metal Matrix Aluminum Alloy

PDF

Topics: Aluminum alloys , Casting , Composite materials , Computer-aided engineering , Metals , Simulation

Measuring Elastic Strain Using Radon Transform-Based Image Processing for Tensile Testing

Ayman S. Ashry, Sayed M. Metwalli

IMECE 2012; 1193-1204https://doi.org/10.1115/IMECE2012-86909

Abstract

View Articletitled, Measuring Elastic Strain Using Radon Transform-Based Image Processing for Tensile Testing

PDF

Topics: Image processing , Tensile testing , ASTM International , Computation , Deformation , Errors , Interpolation , Poisson ratio , Resolution (Optics) , Rotation

Evaluation of Effective Elastic Mechanical Properties of Graphene Sheets

Khalid I. Alzebdeh

IMECE 2012; 1205-1210https://doi.org/10.1115/IMECE2012-87211

Abstract

View Articletitled, Evaluation of Effective Elastic Mechanical Properties of Graphene Sheets

PDF

Topics: Elastic moduli , Graphene , Mechanical properties , Modeling

Fatigue Behavior of API X-80 Steels

Jaeki Kwon, Daeho Jeong, Inkyun Choi, Youngju Kim, Namsub Woo, Sangshik Kim

IMECE 2012; 1211-1218https://doi.org/10.1115/IMECE2012-87225

Abstract

View Articletitled, Fatigue Behavior of API X-80 Steels

PDF

Topics: American Petroleum Institute , Fatigue , Steel , Pipeline risers , Risers (Casting) , Drills (Tools) , Pipes , Seawater , Vortex-induced vibration , Base metals

Optimization of Induction Hardened AISI 1040 Steel by Experimental Design Method and Material Characterization Analysis

Mert Onan, Kasım Baynal, H. İbrahim Ünal, Furkan Katre

IMECE 2012; 1219-1224https://doi.org/10.1115/IMECE2012-87345

Abstract

View Articletitled, Optimization of Induction Hardened AISI 1040 Steel by Experimental Design Method and Material Characterization Analysis

PDF

Topics: Electromagnetic induction , Experimental design , Hardening , Optimization , Steel , Taguchi methods

Degradation Mechanism of Hot Water Immersed Glass SMC

Kotatsu Hamano, Yuqiu Yang, Zhiyuan Zhang, Hiroyuki Hamada

IMECE 2012; 1225-1229https://doi.org/10.1115/IMECE2012-87407

Abstract

View Articletitled, Degradation Mechanism of Hot Water Immersed Glass SMC

PDF

Topics: Acoustic emissions , Glass , Hot water , Sheet molding compound (Plastics)

Fabrication and Thermal Conductivity Characterization of Polyetherimide Nanofoam

Sriharsha S. Sundarram, Wei Jiang, Wei Li

IMECE 2012; 1231-1238https://doi.org/10.1115/IMECE2012-87531

Abstract

View Articletitled, Fabrication and Thermal Conductivity Characterization of Polyetherimide Nanofoam

PDF

Topics: Manufacturing , Thermal conductivity , Foams (Chemistry) , Porosity , Desorption , Polymers , Pressure , Scanning electron microscopy , Temperature

Study on the Degradation Mechanism of the Urushi Products

Yutaro Shimode, Atsushi Endo, Chieko Narita, Seiji Higashi, Masuo Murakami, Yuka Takai, Hidekazu Yasunaga, Akihiko Goto, Hiroyuki Hamada

IMECE 2012; 1239-1244https://doi.org/10.1115/IMECE2012-87693

Abstract

View Articletitled, Study on the Degradation Mechanism of the Urushi Products

PDF

Topics: Brightness (Photometry) , Coating processes , Coatings , Colorimeters , Lacquers , Lumber , Painting , Resins , Sunlight , Ultraviolet radiation

Corrosion Rates and Changes in Mechanical Properties of Copper Alloys due to Seawater Exposure

Andrew Drach, Igor Tsukrov, Todd Gross, Uwe Hofmann, Jochen Aufrecht, Adolf Grohbauer

IMECE 2012; 1245-1250https://doi.org/10.1115/IMECE2012-88156

Abstract

View Articletitled, Corrosion Rates and Changes in Mechanical Properties of Copper Alloys due to Seawater Exposure

PDF

Topics: Copper alloys , Corrosion , Mechanical properties , Seawater , Alloys , North Atlantic Ocean , Plates (structures) , Stress , Tensile strength , Tension

Post-Fire Mechanical Properties and Hardness of 5083 and 6082 Aluminum Alloys

P. T. Summers, R. D. Matulich, Scott W. Case, Brian Lattimer

IMECE 2012; 1251-1259https://doi.org/10.1115/IMECE2012-88175

Abstract

View Articletitled, Post-Fire Mechanical Properties and Hardness of 5083 and 6082 Aluminum Alloys

PDF

Topics: Aluminum alloys , Fire , Mechanical properties , Alloys , Temperature , Aluminum , Vickers hardness testing , Corrosion resistance , Extruding , Furnaces

Material Characterization of Rubberized Aramid for Shock Mitigation

Jagadeep Thota, Mohammed Saadeh, Mohamed B. Trabia, Brendan O’Toole, Chang-Hyun Lee, Kwan-Je Woo, Hong-Lae Park, Kang-Wun Lee, Man-Hoi Koo, Kyoung-Hoon Lee

IMECE 2012; 1261-1267https://doi.org/10.1115/IMECE2012-88437

Abstract

View Articletitled, Material Characterization of Rubberized Aramid for Shock Mitigation

PDF

Topics: Shock (Mechanics) , Armor , Composite materials , Damping , Deformation , Mechanical properties , Military vehicles , Space frame structures , Vehicles , Vibration tests

Fabrication of Polyurethane Based Fabric Composite Shaft and its Experimental Study Under Triple Point Bending

Aniruddha Mitra, Sirajus Salekeen, Mosfequr Rahman

IMECE 2012; 1269-1274https://doi.org/10.1115/IMECE2012-88531

Abstract

View Articletitled, Fabrication of Polyurethane Based Fabric Composite Shaft and its Experimental Study Under Triple Point Bending

PDF

Topics: Composite materials , Manufacturing , Textiles , Urethane elastomers , Fibers , Stress , Deflection , Glass , Bonding , Buckling

Numerical Analysis to Lead Free Solder/Intermetallic Interconnect With Application of Wiedemann-Franz-Lorenz Relation

Yao Yao, Jared Fry, Morris Fine, Leon Keer

IMECE 2012; 1275-1284https://doi.org/10.1115/IMECE2012-88634

Abstract

View Articletitled, Numerical Analysis to Lead Free Solder/Intermetallic Interconnect With Application of Wiedemann-Franz-Lorenz Relation

PDF

Topics: Intermetallic compounds , Lead-free solders , Numerical analysis , Solders , Fracture (Materials) , Thermal conductivity , Tin , Electric current , Electrical conductivity , Materials properties

Estimation of Modulus of Elasticity for Closed-Cell Aluminum Foam

M. T. Ahmadian, A. Gobal, R. Alkhani

IMECE 2012; 1285-1289https://doi.org/10.1115/IMECE2012-88953

Abstract

View Articletitled, Estimation of Modulus of Elasticity for Closed-Cell Aluminum Foam

PDF

Topics: Aluminum , Elastic moduli , Porosity , Analytical methods

Impact Behavior of Liquid Crystalline Polymers

Anil Saigal, Dan Ward, Michael A. Zimmerman

IMECE 2012; 1291-1295https://doi.org/10.1115/IMECE2012-89096

Abstract

View Articletitled, Impact Behavior of Liquid Crystalline Polymers

PDF

Topics: Injection molding , Liquid crystalline polymers

The Effect of Creating Different Size Surface Patterns on Corrosion Properties of Nickel

Alisina Toloei, Vesselin Stoilov, Derek Northwood

IMECE 2012; 1297-1303https://doi.org/10.1115/IMECE2012-89407

Abstract

View Articletitled, The Effect of Creating Different Size Surface Patterns on Corrosion Properties of Nickel

PDF

Topics: Corrosion , Nickel , Corrosion resistance , Polishing , Coatings , Laser ablation , Metals , Scanning electron microscopy , Spectroscopy , Warfare

Multi-Functional Fullerene Soot/Alumina Composites

Francisco C. Robles Hernandez, Goran Majkic

IMECE 2012; 1305-1306https://doi.org/10.1115/IMECE2012-89865

Abstract

View Articletitled, Multi-Functional Fullerene Soot/Alumina Composites

PDF

Topics: Composite materials , Fullerenes , Soot , Carbon , Catalysts , Particulate matter , Coating processes , Coatings , Diamonds , Electrical resistivity

Multifunctional Composite Materials

Health Monitoring of Composite Material Using Fiber Bragg Grating

S. J. Fattahi, D. Necsulescu

IMECE 2012; 1307-1314https://doi.org/10.1115/IMECE2012-85248

Abstract

View Articletitled, Health Monitoring of Composite Material Using Fiber Bragg Grating

PDF

Topics: Composite materials , Fiber Bragg gratings , Sensors , Aircraft , Cantilever beams , Equations of motion , Finite element methods , Finite element model , Lamination , Maintenance

Impact and Quasi-Static Mechanical Properties of a Carbon Fiber Reinforced Carbon Nanotube/Epoxy

Mehran Tehrani, Ayoub Y. Boroujeni, Timothy B. Hartman, Thomas P. Haugh, Scott W. Case, Marwan Al-Haik

IMECE 2012; 1315-1320https://doi.org/10.1115/IMECE2012-86396

Abstract

View Articletitled, Impact and Quasi-Static Mechanical Properties of a Carbon Fiber Reinforced Carbon Nanotube/Epoxy

PDF

Topics: Carbon fibers , Carbon nanotubes , Epoxy adhesives , Epoxy resins , Mechanical properties , Multi-walled carbon nanotubes , Composite materials , Carbon reinforced plastics , Failure , Tensile strength

Some Issues in Passive Impact Location Detection Triangulation in Composite Materials Using Embedded Piezoelectric Sensors

Bruno Zamorano-Senderos, Niell Elvin, Samuel Shin

IMECE 2012; 1321-1328https://doi.org/10.1115/IMECE2012-88896

Abstract

View Articletitled, Some Issues in Passive Impact Location Detection Triangulation in Composite Materials Using Embedded Piezoelectric Sensors

PDF

Topics: Composite materials , Sensors , Computation , Damage , Electrical wires , Evaluation methods

Micromechanical Modeling of Multifunctional Composites

Yehia Bahei-El-Din, Amany Micheal

IMECE 2012; 1329-1336https://doi.org/10.1115/IMECE2012-89304

Abstract

View Articletitled, Micromechanical Modeling of Multifunctional Composites

PDF

Topics: Composite materials , Modeling , Stress , Temperature , Damage , Laminates , Aircraft , Fiber reinforced composites , Fibers , Manufacturing

Designing Multifunctional Polymer Composite for Disaster Monitoring

Cumaraswamy Vipulanandan, Srisothinathan Pakeetharan

IMECE 2012; 1337-1344https://doi.org/10.1115/IMECE2012-89782

Abstract

View Articletitled, Designing Multifunctional Polymer Composite for Disaster Monitoring

PDF

Topics: Design , Disasters , Polymer composites , Cantilever beams , Cross section (Physics) , Electrical resistivity , Building materials , Compressive strength , Finite element methods , Multifunctional materials

Natural Reinforcements for Industrial Polymeric Composites and Manufacturing Processes

Fabrication and Characterization of Starch Based Bagasse Fiber Composite

Sherif Mehanny, Mahmoud Farag, R. M. Rashad, Hamdy Elsayed

IMECE 2012; 1345-1353https://doi.org/10.1115/IMECE2012-86265

Abstract

View Articletitled, Fabrication and Characterization of Starch Based Bagasse Fiber Composite

PDF

Topics: Bagasse , Composite materials , Fibers , Manufacturing , Water , Adhesion , Biodegradation , Density , Porosity , Stability

Sintering of Chitosan and Chitosan Composites

Cynthia Brysch, Eric Wold, Francisco C. Robles Hernandez, John F. Eberth

IMECE 2012; 1355-1356https://doi.org/10.1115/IMECE2012-86393

Abstract

View Articletitled, Sintering of Chitosan and Chitosan Composites

PDF

Topics: Composite materials , Sintering , Carbon , Nanostructures , Temperature , Mechanical properties , Biomedicine , Electron microscopy , Exoskeleton devices , Graphene

Mechanical and Thermal Properties of Jute-Glass Fiber Reinforced Nano Composites

D. P. Surya, A. M. Munirah, S. S. Alamelu, J. C. H. Lau, J. Wei

IMECE 2012; 1357-1362https://doi.org/10.1115/IMECE2012-86633

Abstract

View Articletitled, Mechanical and Thermal Properties of Jute-Glass Fiber Reinforced Nano Composites

PDF

Topics: Fibers , Glass , Jute fiber , Nanocomposites , Thermal properties , Composite materials , Woven composites , Fillers (Materials) , Epoxy adhesives , Epoxy resins

Weld Lining Strength of Injection Molded Jute/PLA and Jute/PP

Cuntao Wang, Yuqiu Yang, Masuo Urakami, Hiroyuki Hamada

IMECE 2012; 1363-1370https://doi.org/10.1115/IMECE2012-86833

Abstract

View Articletitled, Weld Lining Strength of Injection Molded Jute/PLA and Jute/PP

PDF

Topics: Fibers , Jute fiber , Linings (Textiles) , Shapes , Pressure , Injection molding , Pultrusion , Tensile strength

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Mengyuan Liao, Yuqiu Yang, Ying Yu, Hiroyuki Hamada

IMECE 2012; 1371-1378https://doi.org/10.1115/IMECE2012-87314

Abstract

View Articletitled, Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

PDF

Topics: Fiber reinforced composites , Hot water , Weight (Mass) , Glass reinforced plastics , Water , Fibers , Jute fiber , Mechanical properties , Composite materials , Water absorption

Jute Fiber Reinforced Polymeric Composites With Flexible Interphase

Tetsushi Koshino, Mohamed S. Aly-Hassan, Hiroyuki Hamada

IMECE 2012; 1379-1387https://doi.org/10.1115/IMECE2012-87775

Abstract

View Articletitled, Jute Fiber Reinforced Polymeric Composites With Flexible Interphase

PDF

Topics: Jute fiber , Polymer composites , Composite materials , Unsaturated polyesters , Textiles , Cracking (Materials) , Fracture (Process) , Weight (Mass) , Mechanical properties , Mechanical testing

Acoustic Emission Monitoring of Composite Plates Under Buckling Loads

S. Abazary, A. Refahi Oskouei

IMECE 2012; 1389-1396https://doi.org/10.1115/IMECE2012-89220

Abstract

View Articletitled, Acoustic Emission Monitoring of Composite Plates Under Buckling Loads

PDF

Topics: Acoustic emissions , Buckling , Composite materials , Plates (structures) , Stress , Delamination , Damage , Fracture (Materials) , Fracture (Process) , Experimental analysis

Influence of Flax Fibers on Properties of Starch-Based Composites

Hamdy Elsayed, Mahmoud Farag, Hassan Megahed, Sherif Mehanny

IMECE 2012; 1397-1408https://doi.org/10.1115/IMECE2012-89628

Abstract

View Articletitled, Influence of Flax Fibers on Properties of Starch-Based Composites

PDF

Topics: Composite materials , Fibers , Flax , Biodegradation , Water , Adhesion , Density , Hot pressing , Mechanical properties , Porosity

Posters

Effect of Deformation Temperature and Cooling Rate on the Transformation Behavior of the Steel BR1500HS

Chun Xu

IMECE 2012; 1409-1413https://doi.org/10.1115/IMECE2012-85273

Abstract

View Articletitled, Effect of Deformation Temperature and Cooling Rate on the Transformation Behavior of the Steel BR1500HS

PDF

Topics: Cooling , Deformation , Steel , Temperature , Engineering simulation , Ferrites (Magnetic materials) , Martensitic transformations , Phase transitions

Numerical Simulation and Experimental Research on Wrinkle Defect During Hot Bar Rolling Process

Lin Chen, Chun Xu

IMECE 2012; 1415-1419https://doi.org/10.1115/IMECE2012-85402

Abstract

View Articletitled, Numerical Simulation and Experimental Research on Wrinkle Defect During Hot Bar Rolling Process

PDF

Topics: Casting , Computer simulation , Corners (Structural elements) , Displacement , Ditches , Finite element methods , Finite element model , Fracture (Materials) , Metals , Optical microscopes

Correlation of Cutting Force and Power Consumption for Ultrasonic-Vibration-Assisted Cutting of Label Paper Stacks

Karl-Robert Deibel, Jens Boos, Sascha Weikert, Konrad Wegener

IMECE 2012; 1421-1428https://doi.org/10.1115/IMECE2012-85407

Abstract

View Articletitled, Correlation of Cutting Force and Power Consumption for Ultrasonic-Vibration-Assisted Cutting of Label Paper Stacks

PDF

Topics: Cutting , Energy consumption , Vibration , Generators , Aluminum , Compression

Performance of Reground Tools in Drilling

Jose Aecio Gomes de Sousa, Marcelo do Nascimento Sousa, Alisson Rocha Machado

IMECE 2012; 1429-1436https://doi.org/10.1115/IMECE2012-86048

Abstract

View Articletitled, Performance of Reground Tools in Drilling

PDF

Topics: Coating processes , Coatings , Drilling , Drills (Tools) , Errors , Machining , Surface roughness , Thrust , Torque

Modification of the Interface in Carbon Nanotube-Grafted T-Glass Fiber

H. Kawada, S. Sato, M. Kameya

IMECE 2012; 1437-1445https://doi.org/10.1115/IMECE2012-89318

Abstract

View Articletitled, Modification of the Interface in Carbon Nanotube-Grafted T-Glass Fiber

PDF

Topics: Carbon , Fibers , Glass , Nanotubes , Carbon nanotubes , Composite materials , Epoxy resins , Chemical vapor deposition , Fiber reinforced plastics , Shear (Mechanics)

Injection Molding Process Windows Considering Two Conflicting Criteria: Simulation Results

Alicia B. Rodríguez, Esmeralda Niño, Jose M. Castro, Marcelo Suarez, Mauricio Cabrera

IMECE 2012; 1447-1453https://doi.org/10.1115/IMECE2012-89678

Abstract

View Articletitled, Injection Molding Process Windows Considering Two Conflicting Criteria: Simulation Results

PDF

Topics: Injection molding , Optimization , Simulation results

Product Design, Equipment, Machine and Manufacturing

Localized Stresses Combined With Geometric Discontinuities: Study of a Shaft

Ricardo M. Amé, Gabriel M. Dasso

IMECE 2012; 1455-1460https://doi.org/10.1115/IMECE2012-85097

Abstract

View Articletitled, Localized Stresses Combined With Geometric Discontinuities: Study of a Shaft

PDF

Topics: Stress , Keyseats , Torque , Computers , Design , Machine components , Pressure , Stress concentration

Forensic Analysis of an Accidental Firearm Discharge due to a Blow to an Exposed Hammer Spur

Michael A. Knox

IMECE 2012; 1461-1466https://doi.org/10.1115/IMECE2012-85137

Abstract

View Articletitled, Forensic Analysis of an Accidental Firearm Discharge due to a Blow to an Exposed Hammer Spur

PDF

Topics: Forensic sciences , Guns , Hammers , Design , Engineers , Fire , Safety , Testing , Wounds

Effect of Cutting Parameters on Surface Roughness When Milling Hardened AISI D2 Steel (56 HRC) Using Taguchi Techniques

Ahmed Zaidan Mohammed Shammari, Kamal Ati Amwead, Auday Shaker Hadi

IMECE 2012; 1467-1472https://doi.org/10.1115/IMECE2012-85238

Abstract

View Articletitled, Effect of Cutting Parameters on Surface Roughness When Milling Hardened AISI D2 Steel (56 HRC) Using Taguchi Techniques

PDF

Topics: Cutting , Milling , Steel , Surface roughness , Extruding , Forging , Martensitic steel , Sheet metal work , Signal to noise ratio , Taguchi methods

Improved Tool Life in Heat-Pipe Assisted Drilling Operations

Lin Zhu, Tien-Chien Jen, Yong-Bin Liu, Wei-Lai Liu, Ji-Wen Zhao, Yi-Hsin Yen

IMECE 2012; 1473-1479https://doi.org/10.1115/IMECE2012-85481

Abstract

View Articletitled, Improved Tool Life in Heat-Pipe Assisted Drilling Operations

PDF

Topics: Drilling , Heat pipes , Cooling , Wear , Drills (Tools) , Finite element analysis , Fluids , Condensers (steam plant) , Convection , Failure

Retracted: “Evaluation of Cam Shaft Profile Form Error by an Electronic Height Gauge” [ASME 2012 International Mechanical Engineering Congress and Exposition, Volume 3: Design, Materials and Manufacturing, Parts A, B, and C, Houston, Texas, USA, November 9-15, 2012, Conference Sponsors: ASME, ISBN: 978-0-7918-4519-6, Copyright © 2012 by ASME. Paper No. IMECE2012-85789, pp. 1481-1486; 6 pages; doi: 10.1115/IMECE2012-85789]

ASME

IMECE 2012; 1481-1486https://doi.org/10.1115/IMECE2012-85789

Abstract

View Articletitled, Retracted: “Evaluation of Cam Shaft Profile Form Error by an Electronic Height Gauge” [ASME 2012 International Mechanical Engineering Congress and Exposition, Volume 3: Design, Materials and Manufacturing, Parts A, B, and C, Houston, Texas, USA, November 9-15, 2012, Conference Sponsors: ASME, ISBN: 978-0-7918-4519-6, Copyright © 2012 by ASME. Paper No. IMECE2012-85789, pp. 1481-1486; 6 pages; doi: 10.1115/IMECE2012-85789]

PDF

Topics: Design , Errors , Gages , Manufacturing , Mechanical engineering

Application of Optimal Control Method to Improve Kinematic Characteristics of Crank-Slider Mechanisms

H. Saeidi, M. Heidari, M. Zahiri

IMECE 2012; 1487-1496https://doi.org/10.1115/IMECE2012-86021

Abstract

View Articletitled, Application of Optimal Control Method to Improve Kinematic Characteristics of Crank-Slider Mechanisms

PDF

Topics: Kinematics , Optimal control , Genetic algorithms , Design , Motion control

The Oregon State University Mini Malter

Josef G. Hortnagl, John P. Parmigiani

IMECE 2012; 1497-1503https://doi.org/10.1115/IMECE2012-86056

Abstract

View Articletitled, The Oregon State University Mini Malter

PDF

Topics: Data acquisition , Design , Engineering prototypes , Engineering standards , Food science , Hardware , Machinery , Manufacturing engineering , Stainless steel , Vessels

Polyhedral Space Curve Meshing Reducer With Multiple Output Shafts

Yangzhi Chen, Jiang Ding, Chuanghai Yao, Yueling Lv

IMECE 2012; 1505-1511https://doi.org/10.1115/IMECE2012-86087

Abstract

View Articletitled, Polyhedral Space Curve Meshing Reducer With Multiple Output Shafts

PDF

Topics: Design , Design methodology , Gears , Inventions , Rotation , Steering wheels , Wheels

Development of Grinding Robot System for Engine Cylinder Liner’s Oil Groove

D. J. Jeon, T. Y. Noh, C. W. Jung, Y. S. Lee, Y. C. Oh

IMECE 2012; 1513-1519https://doi.org/10.1115/IMECE2012-86212

Abstract

View Articletitled, Development of Grinding Robot System for Engine Cylinder Liner’s Oil Groove

PDF

Topics: Engine cylinders , Grinding , Robots , Cylinders , Sensors , Pistons , Control systems , Energy generation , Engines , Lasers

The Non-Uniform Preloading Effect on Stiffness Behaviour of Angular Contact Ball Bearings

Wenwu Wu, Jun Hong, Xiaohu Li, Yang Li, Baotong Li

IMECE 2012; 1521-1528https://doi.org/10.1115/IMECE2012-86221

Abstract

View Articletitled, The Non-Uniform Preloading Effect on Stiffness Behaviour of Angular Contact Ball Bearings

PDF

Topics: Ball bearings , Stiffness

Contact Ratio of Spatial Helix Gearing Mechanism

Y.-Z. Chen, Z. Chen, Y. Zhang

IMECE 2012; 1529-1536https://doi.org/10.1115/IMECE2012-86232

Abstract

View Articletitled, Contact Ratio of Spatial Helix Gearing Mechanism

PDF

Topics: Design , Design methodology , Gears , Kinematics , Steering wheels

Design of the Pitch Cones of Noncircular Bevel Gears

Kan Shi, Jiqiang Xia, Chunjie Wang, Chunming Geng

IMECE 2012; 1537-1542https://doi.org/10.1115/IMECE2012-86472

Abstract

View Articletitled, Design of the Pitch Cones of Noncircular Bevel Gears

PDF

Topics: Bevel gears , Design

Factors Affecting Torque Loss in Synchronous Belt Drives Under No Transmitted Torque

Hiroyuki Ueda, Masanori Kagotani

IMECE 2012; 1543-1549https://doi.org/10.1115/IMECE2012-86488

Abstract

View Articletitled, Factors Affecting Torque Loss in Synchronous Belt Drives Under No Transmitted Torque

PDF

Topics: Timing belts , Torque , Belts , Pulleys , Temperature , Tension , Stiffness

A New Design for Variable Diameter Orifice Mechanism

Mohamed Gharib

IMECE 2012; 1551-1552https://doi.org/10.1115/IMECE2012-86788

Abstract

View Articletitled, A New Design for Variable Diameter Orifice Mechanism

PDF

Topics: Design , Vacuum , Valves , Coal , Ducts , Fans , Fluid control systems , Furnaces , Geometry , Machinery

Multi-Period Turning Interpolation Algorithm for High-Speed Machining of Continuous Line Segments With Limited Acceleration, Jerk and Chord Error

Lixian Zhang, Xiao-shan Gao, Hongbo Li

IMECE 2012; 1553-1559https://doi.org/10.1115/IMECE2012-87236

Abstract

View Articletitled, Multi-Period Turning Interpolation Algorithm for High-Speed Machining of Continuous Line Segments With Limited Acceleration, Jerk and Chord Error

PDF

Topics: Algorithms , Chords (Trusses) , Errors , Interpolation , Machining , Turning , Computer numerical control machine tools , Machinery

Simulation Driven Processing Function Development, Offering and Operation

Magnus Karlberg, Magnus Löfstrand, Daniel Marjavaara, T. Staffan Lundström

IMECE 2012; 1561-1572https://doi.org/10.1115/IMECE2012-87548

Abstract

View Articletitled, Simulation Driven Processing Function Development, Offering and Operation

PDF

Topics: Design , Simulation

Using FAHP and D-S Theory for Evaluating the State of the Product Family

Liang Hou, Rongshen Lai, Haolun Wang, Yongming Wu, Wei Huang

IMECE 2012; 1573-1584https://doi.org/10.1115/IMECE2012-87551

Abstract

View Articletitled, Using FAHP and D-S Theory for Evaluating the State of the Product Family

PDF

Topics: Economics , Engineering design , Evaluation methods , Industrial capacity , Production management , Uncertainty , Weight (Mass) , Wheels

Development of Inner Rotating Core for a Molding Machine With Topology Optimization

Hong Seok Park, Prakash Dahal

IMECE 2012; 1585-1593https://doi.org/10.1115/IMECE2012-87576

Abstract

View Articletitled, Development of Inner Rotating Core for a Molding Machine With Topology Optimization

PDF

Topics: Machinery , Molding , Optimization , Polymer concrete , Product design , Sulfur , Topology

Stress Concentrations at the Rounded Edges of a Shaft-Hub Interference Fit Expressed in Terms of a Coefficient Normalizing the Coupling Geometry and the Young’s Modulus Effects

Antonio Strozzi, Andrea Baldini, Matteo Giacopini, Enrico Bertocchi, Luca Bertocchi

IMECE 2012; 1595-1601https://doi.org/10.1115/IMECE2012-87715

Abstract

View Articletitled, Stress Concentrations at the Rounded Edges of a Shaft-Hub Interference Fit Expressed in Terms of a Coefficient Normalizing the Coupling Geometry and the Young’s Modulus Effects

PDF

Topics: Geometry , Press fits , Stress , Young's modulus , Stress concentration , Design , Finite element analysis

Modular Product Design, Considering Functions and Properties

Israel Aguilera Navarrete, Alejandro A. Lozano Guzmán

IMECE 2012; 1603-1609https://doi.org/10.1115/IMECE2012-87892

Abstract

View Articletitled, Modular Product Design, Considering Functions and Properties

PDF

Topics: Algorithms , Design , Dimensions , Doors , Machinery , Ovens , Product design

Anti-Evisceration Rings: Proof of Concept

Ralph L. Barnett

IMECE 2012; 1611-1622https://doi.org/10.1115/IMECE2012-88131

Abstract

View Articletitled, Anti-Evisceration Rings: Proof of Concept

PDF

Topics: Defense industry , Engineering prototypes , Fireplaces , Geometry , Pumps , Sealing (Process) , Suction , Testing , Vacuum

Anti-Limb Entrapment Insert

Ralph L. Barnett

IMECE 2012; 1623-1635https://doi.org/10.1115/IMECE2012-88135

Abstract

View Articletitled, Anti-Limb Entrapment Insert

PDF

Topics: Biological tissues , Fins , Friction , Geometry , Hazards , Pipes , Pressure , Suction

Standard Chain Lever Load Binder

Ralph L. Barnett, Theodore Liber

IMECE 2012; 1637-1649https://doi.org/10.1115/IMECE2012-88139

Abstract

View Articletitled, Standard Chain Lever Load Binder

PDF

Topics: Binders (Materials) , Chain , Levers , Stress , Tension , Safety , Boundary-value problems , Cables , Energy levels (Quantum mechanics) , Friction

Skill Level Differences of Urushi Craftspeople in Urushi Products

Yutaro Shimode, Atsushi Endo, Chieko Narita, Yuka Takai, Akihiko Goto, Hiroyuki Hamada

IMECE 2012; 1651-1656https://doi.org/10.1115/IMECE2012-88288

Abstract

View Articletitled, Skill Level Differences of Urushi Craftspeople in Urushi Products

PDF

Topics: Coating processes , Coatings , Lacquers , Manufacturing industry , Painting , Resins

Modeling and Experimental Evaluation of Monocrystalline Piezoelectric Materials for Electromechanical Actuation

Devdas Shetty, Claudio Campana, Nikolay Nazaryan

IMECE 2012; 1657-1663https://doi.org/10.1115/IMECE2012-88301

Abstract

View Articletitled, Modeling and Experimental Evaluation of Monocrystalline Piezoelectric Materials for Electromechanical Actuation

PDF

Topics: Modeling , Piezoelectric materials , Actuators , Advanced materials , Aerospace industry , Electric potential , Engines , Heat , Internal friction , Lumped parameter models

Comparison of Closed Chain Mechanisms for Positional Deviations

H. P. Jawale, H. T. Thorat

IMECE 2012; 1665-1671https://doi.org/10.1115/IMECE2012-88522

Abstract

View Articletitled, Comparison of Closed Chain Mechanisms for Positional Deviations

PDF

Topics: Chain , Errors , Dimensionless numbers

A Novel Error Detection and Compensation Method of Hourglass Worm Gear Hob

Q. Y. Shu, Q. Y. Qiu, P. E. Feng, L. Cao

IMECE 2012; 1673-1678https://doi.org/10.1115/IMECE2012-88644

Abstract

View Articletitled, A Novel Error Detection and Compensation Method of Hourglass Worm Gear Hob

PDF

Topics: Errors , Worm gears , Manufacturing , Grinding , Blanks , Error compensation , Grinding wheels , Load bearing capacity , Lubrication

Spatial Four-Bar Motion Generation With Static Control Condition

Yahia M. Al-Smadi, Omar Awad

IMECE 2012; 1679-1682https://doi.org/10.1115/IMECE2012-88652

Abstract

View Articletitled, Spatial Four-Bar Motion Generation With Static Control Condition

PDF

Topics: Design , Displacement , Generators , Torque

Design of a Multiple-Actuation Shape Memory Alloy Pipe Coupler: Material Development and Characterization

Majid Tabesh, John Rohmer, James G. Boyd, Dimitris C. Lagoudas, Kadri C. Atli, Brian E. Franco, Ibrahim Karaman

IMECE 2012; 1683-1694https://doi.org/10.1115/IMECE2012-88771

Abstract

View Articletitled, Design of a Multiple-Actuation Shape Memory Alloy Pipe Coupler: Material Development and Characterization

PDF

Topics: Design , Pipe couplings , Shape memory alloys , Pressure , Anisotropy , Nickel titanium alloys , Pipes , Dimensions , Shape memory effects , Steel

Motion Analysis of Weaving “Kana-ami” Technique With Different Years of Experience

Ken-ichi Tsuji, Chieko Narita, Atsushi Endo, Yuka Takai, Akihiko Goto, Gen Sasaki, Tomoko Ohta, Hiroyuki Hamada

IMECE 2012; 1695-1700https://doi.org/10.1115/IMECE2012-88809

Abstract

View Articletitled, Motion Analysis of Weaving “Kana-ami” Technique With Different Years of Experience

PDF

Topics: Computers , Reflection , Shapes , Sprays , Wire , Wire mesh

A New High-Precision Bearing Measuring System for Non-Repetitive Run-Out (NRRO)

Zhaohui Yang, Jun Hong, Jinhua Zhang, Michael Yu Wang, Jian Liu

IMECE 2012; 1701-1704https://doi.org/10.1115/IMECE2012-88810

Abstract

View Articletitled, A New High-Precision Bearing Measuring System for Non-Repetitive Run-Out (NRRO)

PDF

Topics: Air bearings , Ball bearings , Bearings , Errors , Stress , Displacement , Machine tools , Manufacturing , Rotation , Sensors

Evaluation Method for Mechanical Properties of Polymeric Brush as Cushioning Material on Conveying Equipment

Yasuhiko Fukami, Hiroyuki Nishimoto, Akio Ohtani, Asami Nakai, Hiroyuki Hamada

IMECE 2012; 1705-1708https://doi.org/10.1115/IMECE2012-89163

Abstract

View Articletitled, Evaluation Method for Mechanical Properties of Polymeric Brush as Cushioning Material on Conveying Equipment

PDF

Topics: Cushioning materials , Evaluation methods , Mechanical properties , Fibers , Bearings , Stress , Concretes , Design , Noise (Sound) , Punching machinery (Metalworking)

Evaluation System of Tooth Contact Patterns of Hypoid Gears Using Artificial Intelligence

Morimasa Nakamura, Keisuke Kojima, Ichiro Moriwaki

IMECE 2012; 1709-1715https://doi.org/10.1115/IMECE2012-89323

Abstract

View Articletitled, Evaluation System of Tooth Contact Patterns of Hypoid Gears Using Artificial Intelligence

PDF

Topics: Artificial intelligence , Artificial neural networks , Spiral bevel gears

Product Designing, Engineering, Manufacturing of Innovative Products at the Request of Large Retailers

Brett P. Seber

IMECE 2012; 1717-1718https://doi.org/10.1115/IMECE2012-89631

Abstract

View Articletitled, Product Designing, Engineering, Manufacturing of Innovative Products at the Request of Large Retailers

PDF

Topics: Design , Manufacturing , Quality control , Vacuum

Fracture Mechanics Based Life Prediction of Hollow Extrusion Dies

Sayyad Zahid Qamar

IMECE 2012; 1719-1725https://doi.org/10.1115/IMECE2012-93109

Abstract

View Articletitled, Fracture Mechanics Based Life Prediction of Hollow Extrusion Dies

PDF

Topics: Extruding , Fracture mechanics , Fracture (Materials) , Electrical discharge machining , Failure , Fatigue , Maintenance , Cylinders , Fatigue life , Flat plates

Design and Fabrication of Test Facility for Longevity Testing of Elastomer Seals

S. Z. Qamar, T. Pervez, M. van de Velden, F. J. Sanchez

IMECE 2012; 1727-1734https://doi.org/10.1115/IMECE2012-93145

Abstract

View Articletitled, Design and Fabrication of Test Facility for Longevity Testing of Elastomer Seals

PDF

Topics: Design , Elastomers , Manufacturing , Test facilities , Testing , Temperature , Water , Tertiary petroleum recovery , Wells , Batteries

Safety and Reliability Methods of Design and Manufacturing

A Protective Structure, Saver During Structural Collapse

Alireza Heidari, Vera V. Galishnikova, Iradj Mahmoudzadeh Kani

IMECE 2012; 1735-1741https://doi.org/10.1115/IMECE2012-85447

Abstract

View Articletitled, A Protective Structure, Saver During Structural Collapse

PDF

Topics: Collapse , Steel , Design , Earthquakes , Plates (structures) , Sleep , Buckling , Ceilings , Computer software , Deflection

Characteristic Aircraft Landing Gear Thermo-Tribo-Mechanical Model

Laurent Heirendt, Hugh H. T. Liu, Phillip Wang

IMECE 2012; 1743-1748https://doi.org/10.1115/IMECE2012-86621

Abstract

View Articletitled, Characteristic Aircraft Landing Gear Thermo-Tribo-Mechanical Model

PDF

Topics: Aircraft , Gears , Shock absorbers , Heat , Bearings , Damage , Pistons , Stress , Surface roughness , Temperature

Optimization of Failure Rate of Centrifugal Pumps Using Genetic Algorithm

Peymaan Makarachi, Mohammad Pourgol-Mohammad

IMECE 2012; 1749-1755https://doi.org/10.1115/IMECE2012-87633

Abstract

View Articletitled, Optimization of Failure Rate of Centrifugal Pumps Using Genetic Algorithm

PDF

Topics: Centrifugal pumps , Failure , Genetic algorithms , Optimization , Pumps , Bearings , Fluids , Design , Failure mechanisms , Flow (Dynamics)

Risk Decision: Main Constraints and Approaches

Matilde A. Rodrigues, Pedro M. Arezes, Celina P. Leão

IMECE 2012; 1757-1763https://doi.org/10.1115/IMECE2012-88354

Abstract

View Articletitled, Risk Decision: Main Constraints and Approaches

PDF

Topics: Risk , Risk assessment , Safety , Acceptance criteria , Accidents , Decision analysis , Decision making , Occupational safety and health , Risk analysis , Risk management

The Early Design Reliability Prediction Method

Bryan M. O’Halloran, Chris Hoyle, Robert B. Stone, Irem Y. Tumer

IMECE 2012; 1765-1776https://doi.org/10.1115/IMECE2012-89592

Abstract

View Articletitled, The Early Design Reliability Prediction Method

PDF

Topics: Design , Reliability , Failure , Probability , Decision making , Electricity (Physics)

Toward an Early-Phase Conceptual System Design Risk-Informed Decision Making Framework

Douglas Van Bossuyt, Chris Hoyle, Irem Y. Tumer, Richard Malak, Toni Doolen, Andy Dong

IMECE 2012; 1777-1788https://doi.org/10.1115/IMECE2012-89639

Abstract

View Articletitled, Toward an Early-Phase Conceptual System Design Risk-Informed Decision Making Framework

PDF

Topics: Design , Risk-based decision making , Risk , Conceptual design , Engineers , Accounting , Complex systems , Computers , Heat conduction , Lenses (Optics)

A Survey of Early Design Risk and Reliability Methods and Their Impediments to Move Into Practice

Bryan M. O’Halloran, Robert B. Stone, Irem Y. Tumer

IMECE 2012; 1789-1796https://doi.org/10.1115/IMECE2012-89703

Abstract

View Articletitled, A Survey of Early Design Risk and Reliability Methods and Their Impediments to Move Into Practice

PDF

Topics: Reliability , Risk in Early Design , Design , Failure mechanisms , Engineers , Failure , Risk , Surveying

Six Sigma, Design for Six Sigma and Lean and Design for Lean Methodologies in Design, Materials and Manufacturing Engineering

Analysys and Optimization of Exit Burr Size and Surface Roughness in Milling Using Desireability Function

Seyed Ali Niknam, Rene Kamguem, Victor Songmene

IMECE 2012; 1797-1806https://doi.org/10.1115/IMECE2012-86201

Abstract

View Articletitled, Analysys and Optimization of Exit Burr Size and Surface Roughness in Milling Using Desireability Function

PDF

Topics: Aluminum alloys , Milling , Optimization , Surface roughness

A Fixture Failure Control Chart for Variation Caused by Assembly Fixtures

Kristina Wärmefjord, Johan S. Carlson

IMECE 2012; 1807-1814https://doi.org/10.1115/IMECE2012-86257

Abstract

View Articletitled, A Fixture Failure Control Chart for Variation Caused by Assembly Fixtures

PDF

Topics: Failure , Manufacturing , Quality control charts

Optimization of Assembly and Disassembly of GP7200 Engine

Chittaranjan Sahay, Devdas Shetty, Suhash Ghosh, Mohammed Islam, Mark Turner

IMECE 2012; 1815-1826https://doi.org/10.1115/IMECE2012-87774

Abstract

View Articletitled, Optimization of Assembly and Disassembly of GP7200 Engine

PDF

Topics: Engines , Manufacturing , Optimization , Safety , Aircraft engines , Corrective actions , Cycles , Design , Errors , Maintenance

Effects of Within Part Variation on Measurement System Analysis

Chittaranjan Sahay, Suhash Ghosh, Syed Mohammed Haja Mohideen

IMECE 2012; 1827-1836https://doi.org/10.1115/IMECE2012-87861

Abstract

View Articletitled, Effects of Within Part Variation on Measurement System Analysis

PDF

Topics: Measurement systems , Errors , Gages

Implementation of Lean Tools and Methodologies in Design

Mohamed E. M. El-Sayed

IMECE 2012; 1837-1842https://doi.org/10.1115/IMECE2012-89022

Abstract

View Articletitled, Implementation of Lean Tools and Methodologies in Design

PDF

Topics: Design , Manufacturing , Product development , Flow (Dynamics)

Design of a Lean Methodology for an Ergonomic and Sustainable Work Environment in Textile and Garment Industry

Laura Costa Maia, Anabela Carvalho Alves, Celina Pinto Leão

IMECE 2012; 1843-1852https://doi.org/10.1115/IMECE2012-89048

Abstract

View Articletitled, Design of a Lean Methodology for an Ergonomic and Sustainable Work Environment in Textile and Garment Industry

PDF

Topics: Design , Sustainability , Textiles , Ergonomics , Raw materials , Sustainable development , Water

Sustainable Manufacturing Engineering Design-Structure, Analysis and Practices

Leaf Spring Flats, A Frugal Alternative for Making Rotavator Tines

Balaji Visvanath Bheeman, Nivrithi Badrinarayanan, Varadharajan Mohan, Sabarish Sivaprakasam, Pramodh Venkataperumal

IMECE 2012; 1853-1857https://doi.org/10.1115/IMECE2012-86912

Abstract

View Articletitled, Leaf Spring Flats, A Frugal Alternative for Making Rotavator Tines

PDF

Topics: Springs , Wear , Soil , Blades , Manufacturing

Power Grid System Design Optimization Considering Renewable Energy Strategies and Environmental Impact

Joseph Piacenza, Irem Y. Tumer, Christopher Hoyle, John Fields

IMECE 2012; 1859-1869https://doi.org/10.1115/IMECE2012-88451

Abstract

View Articletitled, Power Grid System Design Optimization Considering Renewable Energy Strategies and Environmental Impact

PDF

Topics: Design , Optimization , Power grids , Renewable energy , Energy generation , Complex systems , Energy conservation , Energy consumption , Fossil fuels , Renewable energy sources

Energy Crisis From Household Dryer Machine

Jobaidur R. Khan

IMECE 2012; 1871-1874https://doi.org/10.1115/IMECE2012-89688

Abstract

View Articletitled, Energy Crisis From Household Dryer Machine

PDF

Topics: Machinery , Climate change , Fuels , Heat , Energy generation , Reservoirs , Sunlight

Traditional and Non-Traditional Machining Processes

New In-Situ Technology for Marine Diesel Engine Crankshaft Renovation and its 3D Surface Texture Model

Toms Torims, Branko Katalinic, Andris Ratkus, Janis Vilcans, Marcis Zarins

IMECE 2012; 1875-1882https://doi.org/10.1115/IMECE2012-85354

Abstract

View Articletitled, New In-Situ Technology for Marine Diesel Engine Crankshaft Renovation and its 3D Surface Texture Model

PDF

Topics: Building renovation , Diesel engines , Surface texture , Maintenance , Surface roughness , Engines , Grinding , Machining , Bearings , Shipbuilding

The Effect of Crystallographic Orientation on Material Removal Behavior of (001) Plane KDP Crystal in Nano-Scratch Test

C. L. Zhang, P. F. Feng, D. Wang

IMECE 2012; 1883-1889https://doi.org/10.1115/IMECE2012-85869

Abstract

View Articletitled, The Effect of Crystallographic Orientation on Material Removal Behavior of (001) Plane KDP Crystal in Nano-Scratch Test

PDF

Topics: Brittleness , Crystals , Deformation

Nonlinear Vibration of a Thin-Plate Workpiece During High Speed Milling Under 1:1 Internal Resonance Condition

Wei Zhang, Rui Zhou, Jean W. Zu, Qian Wang

IMECE 2012; 1891-1903https://doi.org/10.1115/IMECE2012-86159

Abstract

View Articletitled, Nonlinear Vibration of a Thin-Plate Workpiece During High Speed Milling Under 1:1 Internal Resonance Condition

PDF

Topics: Milling , Nonlinear dynamics , Nonlinear vibration , Resonance , Excitation , Cantilevers , Chaos , Computer simulation , Displacement , Equations of motion

A Prediction of Total Cutting Time When Crosscutting Rounds, Pipe, and Rectangular Bar With a Portable Bandsaw

Thomas P. James, Amrit Sagar, Joseph P. Domblesky

IMECE 2012; 1905-1912https://doi.org/10.1115/IMECE2012-86179

Abstract

View Articletitled, A Prediction of Total Cutting Time When Crosscutting Rounds, Pipe, and Rectangular Bar With a Portable Bandsaw

PDF

Topics: Band saws , Cutting , Pipes , Sawing

Dynamic Behavior of Different Grinding Wheel Hub Material in High Efficiency Deep Grinding (HEDG)

Taghi Tawakoli, Alireza Vesali

IMECE 2012; 1913-1919https://doi.org/10.1115/IMECE2012-86207

Abstract

View Articletitled, Dynamic Behavior of Different Grinding Wheel Hub Material in High Efficiency Deep Grinding (HEDG)

PDF

Topics: Grinding , Grinding wheels , Wheels , Carbon reinforced plastics , Vibration , Carbon , Coolants , Design , Fibers , Grinding equipment

Multi Objective Optimization of Laser Welding Process Parameters by Desirability Approach of Design of Experiments

T. Suthakar, K. R. Balasubramanian, K. Sankaranarayanasamy

IMECE 2012; 1921-1929https://doi.org/10.1115/IMECE2012-86782

Abstract

View Articletitled, Multi Objective Optimization of Laser Welding Process Parameters by Desirability Approach of Design of Experiments

PDF

Topics: Experimental design , Laser welding , Pareto optimization , Optimization , Power density , Welding , Composite materials , Gas flow , Stainless steel

Finite Element Analysis of a Frictionally Damped Slender Endmill

Reza Madoliat, Sajad Hayati

IMECE 2012; 1931-1939https://doi.org/10.1115/IMECE2012-86920

Abstract

View Articletitled, Finite Element Analysis of a Frictionally Damped Slender Endmill

PDF

Topics: Finite element analysis , Dampers , Chatter , Cylinders , Damping , Frequency response , Friction , Machining , Milling , Modeling

Modeling Material Removal in Lapping of Brittle Materials

Songsheng Zhou, Alex Fang

IMECE 2012; 1941-1945https://doi.org/10.1115/IMECE2012-87079

Abstract

View Articletitled, Modeling Material Removal in Lapping of Brittle Materials

PDF

Topics: Brittleness , Grinding , Modeling , Pressure , Density , Diamonds

Analytical and Numerical Study of Hard Rock Cutting With Roller Disc Cutters

Mehdi Serati, Habib Alehossein, David J. Williams

IMECE 2012; 1947-1953https://doi.org/10.1115/IMECE2012-87220

Abstract

View Articletitled, Analytical and Numerical Study of Hard Rock Cutting With Roller Disc Cutters

PDF

Topics: Cutting , Disks , Rocks , Rollers , Steel , Stress , Boundary-value problems , Computer simulation , Corners (Structural elements) , Finite element analysis

The Application of Image Correlation in Order to Define Chatter During Milling of Titanium

Afshin Koohestani, John P. T. Mo

IMECE 2012; 1955-1958https://doi.org/10.1115/IMECE2012-87289

Abstract

View Articletitled, The Application of Image Correlation in Order to Define Chatter During Milling of Titanium

PDF

Topics: Chatter , Milling , Titanium

Effect of Silicon Content of Aluminum Alloy 6351 in Turning Process

Daniel Fernandes da Cunha, Marcio Bacci da Silva

IMECE 2012; 1959-1967https://doi.org/10.1115/IMECE2012-87352

Abstract

View Articletitled, Effect of Silicon Content of Aluminum Alloy 6351 in Turning Process

PDF

Topics: Aluminum alloys , Silicon , Surface roughness , Turning , Cutting , Fluids , Machinability , Aluminum , Cooling , Design

Microdrilling of Biocompatible Materials

Sankalp Mohanty, Stephen Wells, Wayne Hung

IMECE 2012; 1969-1977https://doi.org/10.1115/IMECE2012-87523

Abstract

View Articletitled, Microdrilling of Biocompatible Materials

PDF

Topics: Biomaterials , Chisels , Coating processes , Coatings , Corners (Structural elements) , Cutting , Damage , Drilling , Drills (Tools) , Failure

Relative Effects of Cooling and Lubrication in Micro-Milling of Aluminum and the Design of Atomization Cooling and Lubrication Systems

Shawn E. Nevala, Van T. Wifvat, Samuel A. Johnson, John E. Wentz

IMECE 2012; 1979-1986https://doi.org/10.1115/IMECE2012-87825

Abstract

View Articletitled, Relative Effects of Cooling and Lubrication in Micro-Milling of Aluminum and the Design of Atomization Cooling and Lubrication Systems

PDF

Topics: Aluminum , Cooling , Design , Industrial lubrication systems , Lubrication , Micromilling , Cutting , Fluids , Micromachining , Nozzles

Influence of Tool Holder Material on Interfacial, Insert and Tool Holder Temperatures During Turning Operation of Gray Iron

Almir K. Kaminise, Gilmar Guimaraes, Marcio B. Da Silva

IMECE 2012; 1987-1995https://doi.org/10.1115/IMECE2012-87959

Abstract

View Articletitled, Influence of Tool Holder Material on Interfacial, Insert and Tool Holder Temperatures During Turning Operation of Gray Iron

PDF

Topics: Cutting , Gray iron , Machining , Temperature , Turning

A Device for Performing Controlled Cutting Operations

Andrew M. Phan, John P. Parmigiani

IMECE 2012; 1997-2006https://doi.org/10.1115/IMECE2012-87964

Abstract

View Articletitled, A Device for Performing Controlled Cutting Operations

PDF

Topics: Cutting , Blades , Testing , Accuracy and precision , Degrees of freedom , Finite element analysis , Food products , Pressing , Surgery , Wood products

The Effects of Machining Induced Damage on Flexural Strength of Low Density Carbon Foam

A. O’Connor, M. Ramulu

IMECE 2012; 2007-2014https://doi.org/10.1115/IMECE2012-88124

Abstract

View Articletitled, The Effects of Machining Induced Damage on Flexural Strength of Low Density Carbon Foam

PDF

Topics: Bending strength , Carbon , Damage , Density , Machining , Cracking (Materials) , Diamonds , Fracture (Process) , Rupture , Cutting tools

Influence of Shot Peening Parameters on Process Effectiveness

Abdalla Elbella, Fawaz Fadul, Sri Harsha Uddanda, Nagender Reddy Kasarla

IMECE 2012; 2015-2021https://doi.org/10.1115/IMECE2012-88265

Abstract

View Articletitled, Influence of Shot Peening Parameters on Process Effectiveness

PDF

Topics: Shot peening , Stress , Finite element analysis , Simulation , Aluminum , Computer simulation , Fatigue life , Steel , Surface finishing , Titanium

Droplet Spray Behavior of an Atomization-Based Cutting Fluid (ACF) System for Machining of Titanium Alloys

Chandra Nath, Shiv G. Kapoor, Anil K. Srivastava, Jon Iverson

IMECE 2012; 2023-2033https://doi.org/10.1115/IMECE2012-88369

Abstract

View Articletitled, Droplet Spray Behavior of an Atomization-Based Cutting Fluid (ACF) System for Machining of Titanium Alloys

PDF

Topics: Cutting , Drops , Flow (Dynamics) , Fluids , Machining , Sprays , Titanium alloys

Experimental Analysis of Thermal Energy Deburring Process by Design of Experiment

Ashley Fritz, Lisa Sekol, Jim Koroskenyi, Bill Walch, Jeff Minear, Vernon Fernandez, Liping Liu

IMECE 2012; 2035-2041https://doi.org/10.1115/IMECE2012-88411

Abstract

View Articletitled, Experimental Analysis of Thermal Energy Deburring Process by Design of Experiment

PDF

Topics: Deburring , Design , Experimental analysis , Thermal energy , Pressure , Fuels , Machinery , Oxygen , Performance , Regression models

Hole Surface Quality and Damage When Drilling Unidirectional CFRP Composites

Eshetu D. Eneyew, M. Ramulu

IMECE 2012; 2043-2051https://doi.org/10.1115/IMECE2012-88426

Abstract

View Articletitled, Hole Surface Quality and Damage When Drilling Unidirectional CFRP Composites

PDF

Topics: Carbon reinforced plastics , Composite materials , Damage , Drilling , Surface quality , Cutting , Drills (Tools) , Fibers , Diamonds , Rotation

Turning of SAE 1050 Steel With Vegetable Base Cutting Fluid

Rosemar Batista da Silva, Álisson Rocha Machado, Déborah de Oliveira Almeida, Emmanuel O. Ezugwu

IMECE 2012; 2053-2060https://doi.org/10.1115/IMECE2012-88515

Abstract

View Articletitled, Turning of SAE 1050 Steel With Vegetable Base Cutting Fluid

PDF

Topics: Cutting , Fluids , Machinability , Steel , Turning , Wear

High Speed Routing of Woven Carbon Fiber Reinforced Epoxy Laminates

M. Meshreki, A. Sadek, M. H. Attia

IMECE 2012; 2061-2066https://doi.org/10.1115/IMECE2012-88616

Abstract

View Articletitled, High Speed Routing of Woven Carbon Fiber Reinforced Epoxy Laminates

PDF

Topics: Carbon fibers , Epoxy adhesives , Epoxy resins , Laminates , Carbon reinforced plastics , Delamination , Errors , Surface roughness , Cutting , Temperature

An Integrated Approach for the Predictions of the Workpiece Vibrations During Machining of Aerospace Structure: Numerical and Experimental Validation

Mouhab Meshreki, József Kövecses, Helmi Attia

IMECE 2012; 2067-2076https://doi.org/10.1115/IMECE2012-89066

Abstract

View Articletitled, An Integrated Approach for the Predictions of the Workpiece Vibrations During Machining of Aerospace Structure: Numerical and Experimental Validation

PDF

Topics: Aerospace industry , Machining , Vibration , Design , Dynamic models , Dynamics (Mechanics) , Computation , Cycles , Errors , Filtration

Vibration Control of Relative Tool-Spindle Displacement for CNC Lathe With Pipe Frame Structure

Yoshitaka Morimoto, Naohiko Suzuki, Yoshiyuki Kaneko, Minoru Isobe

IMECE 2012; 2077-2083https://doi.org/10.1115/IMECE2012-89292

Abstract

View Articletitled, Vibration Control of Relative Tool-Spindle Displacement for CNC Lathe With Pipe Frame Structure

PDF

Topics: Computer numerical control machine tools , Displacement , Pipes , Vibration control , Machine tools , Stiffness , Bracing (Construction) , Design , Evacuations , Trusses (Building)

Precision Micromachining Channels in Highly Elastic Polymers for Applications in Tissue Engineering

Thomas P. James, Amrit Sagar, Nathaniel B. Eckman, Anil Saigal

IMECE 2012; 2085-2090https://doi.org/10.1115/IMECE2012-89658

Abstract

View Articletitled, Precision Micromachining Channels in Highly Elastic Polymers for Applications in Tissue Engineering

PDF

Topics: Elastomers , Micromachining , Size effect , Tissue engineering

Finite Element Based Evaluation of Abrasive Waterjet Peening With Elastic Prestress: Effect of Prestress Loading

Balaji Sadasivam, Dwayne Arola

IMECE 2012; 2091-2096https://doi.org/10.1115/IMECE2012-90001

Abstract

View Articletitled, Finite Element Based Evaluation of Abrasive Waterjet Peening With Elastic Prestress: Effect of Prestress Loading

PDF

Topics: Boundary-value problems , Finite element analysis , Shot peening , Stress , Surface finishing , Bending (Stress) , Displacement , Finite element model , High cycle fatigue , Surface roughness