Skip Nav Destination

Proceedings Papers

Select Year

Select Volume

Volume 3: Design and Manufacturing

Design and Manufacturing

Advances in Materials Forming

Dynamic Analysis of Handling Compliant Sheet-Metal Blanks

Gene Y. Liao

IMECE 2007; 1-7https://doi.org/10.1115/IMECE2007-41120

Abstract

View Articletitled, Dynamic Analysis of Handling Compliant Sheet-Metal Blanks

PDF

Topics: Blanks , Dynamic analysis , Sheet metal , Materials handling , End effectors , Equations of motion , Finite element analysis , Metal stamping , Product quality , Stiffness

Nanoscale Molding of a Zirconium Based Bulk Metallic Glass

Kavic Rason, Brad Kinsey

IMECE 2007; 9-15https://doi.org/10.1115/IMECE2007-41520

Abstract

View Articletitled, Nanoscale Molding of a Zirconium Based Bulk Metallic Glass

PDF

Topics: Metallic glasses , Molding , Nanoscale phenomena , Zirconium , Silicon , Cavities , Coating processes , Coatings , Nanostructures , Surface tension

Experimental Study of Drawing Process With Servo Press

Pei-Lum Tso, Hsin-Kai Liu, Cheng-Ho Li

IMECE 2007; 17-21https://doi.org/10.1115/IMECE2007-41692

Abstract

View Articletitled, Experimental Study of Drawing Process With Servo Press

PDF

Topics: Servomechanism presses , Simulation , Failure , Finite element methods , Fracture (Materials) , Computer software , Displacement , Metal stamping , Power presses , Stress

Process Parameters Optimization in Multilayer Laser Solid Freeform Fabrication Process Using a 3D Transient Numerical Model

Masoud Alimardani, Ehsan Toyserkani, Christ P. Paul

IMECE 2007; 23-32https://doi.org/10.1115/IMECE2007-42150

Abstract

View Articletitled, Process Parameters Optimization in Multilayer Laser Solid Freeform Fabrication Process Using a 3D Transient Numerical Model

PDF

Topics: Computer simulation , Lasers , Optimization , Stereolithography , Transients (Dynamics) , Modeling , Stress , Temperature , Carbon steel , Geometry

Current Trends of Hydroforming Process Into Automotive Body Structure and Chassis Applications

Ramakrishna Koganti, Jason Balzer, Klaus Hertell

IMECE 2007; 33-38https://doi.org/10.1115/IMECE2007-43379

Abstract

View Articletitled, Current Trends of Hydroforming Process Into Automotive Body Structure and Chassis Applications

PDF

Topics: Design , Emissions , Engines , High pressure (Physics) , High strength steel , Instrumentation , Manufacturing , Mechanical properties , Metal stamping , Pressure

Online Wall Thickness Control for Blow Molded Part Using Fuzzy Iterative Learning Control Algorithm

Geng-Qun Huang, Han-Xiong Huang

IMECE 2007; 39-44https://doi.org/10.1115/IMECE2007-43394

Abstract

View Articletitled, Online Wall Thickness Control for Blow Molded Part Using Fuzzy Iterative Learning Control Algorithm

PDF

Topics: Algorithms , Iterative learning control , Wall thickness

The Effect of Materials Testing Mode on Mechanical Behavior Under Temperature Influence in Complex Deformation Processes

S. Anurag, Y. B. Guo

IMECE 2007; 45-52https://doi.org/10.1115/IMECE2007-43847

Abstract

View Articletitled, The Effect of Materials Testing Mode on Mechanical Behavior Under Temperature Influence in Complex Deformation Processes

PDF

Topics: Deformation , Materials testing , Mechanical behavior , Plasticity , Temperature

Deformation and Structural Development of Polymer in Manufacturing

A Study of PLA Crystallization During Solid-State Foaming

Xiaoxi Wang, Vipin Kumar, Wei Li

IMECE 2007; 53-59https://doi.org/10.1115/IMECE2007-42547

Abstract

View Articletitled, A Study of PLA Crystallization During Solid-State Foaming

PDF

Topics: Crystallization , Equilibrium (Physics) , Sorption , Temperature , Biodegradation , Heating , Packaging , Polymers , Strength (Materials) , Tissue scaffolds

Solid-State Foaming of Polycaprolactone (PCL)

Hai Wang, Wei Li, Vipin Kumar

IMECE 2007; 61-66https://doi.org/10.1115/IMECE2007-42666

Abstract

View Articletitled, Solid-State Foaming of Polycaprolactone (PCL)

PDF

Topics: Biodegradation , Carbon dioxide , Compression molding , Foams (Chemistry) , Glass transition , Melting , Polymers , Pressure , Quenching (Metalworking) , Scanning electron microscopy

Warpage Reduction Through Robust Engineering of a Thin-Walled Injection Molded Component

Steven J. Sobolak, Badih A. Jawad

IMECE 2007; 67-73https://doi.org/10.1115/IMECE2007-42775

Abstract

View Articletitled, Warpage Reduction Through Robust Engineering of a Thin-Walled Injection Molded Component

PDF

Topics: Warping , Noise factors , Cycles , Glass fibers , Lasers , Molding , Rheology , Robust control , Shear rate , Shrinkage (Materials)

Anisotropy Study of a Constrained Thin Walled Component Using a Range of Processing Control Factors

Steven J. Sobolak, Badih A. Jawad

IMECE 2007; 75-81https://doi.org/10.1115/IMECE2007-42776

Abstract

View Articletitled, Anisotropy Study of a Constrained Thin Walled Component Using a Range of Processing Control Factors

PDF

Topics: Anisotropy , Shrinkage (Materials) , Glass fibers , Wall thickness , Lasers

Relationship Between Rheological Properties and Microstructure of Polypropylene/Organic Montmorillonite Nanocomposite Compounded by Twin Screw Extruder

Guo Jiang, Han-Xiong Huang

IMECE 2007; 83-88https://doi.org/10.1115/IMECE2007-43360

Abstract

View Articletitled, Relationship Between Rheological Properties and Microstructure of Polypropylene/Organic Montmorillonite Nanocomposite Compounded by Twin Screw Extruder

PDF

Topics: Nanocomposites , Rheology , Screws

Energetic and Multifunctional Materials and Their Applications

Structural Performance of Slab Track to High-Speed Train

Yung-Hsiang Chen, Z.-Ming Shiu

IMECE 2007; 89-97https://doi.org/10.1115/IMECE2007-42795

Abstract

View Articletitled, Structural Performance of Slab Track to High-Speed Train

PDF

Topics: Slabs , Trains , Dynamic stability , Stiffness , Stress , Structural analysis

An Application of Computer Aided Engineering in Rubber Injection Mold With a Cold Runner System Design and Manufacturing

Supasit Rodkwan, Rungtham Panyawipart, Chana Raksiri, Kunnayut Eiamsa-ard

IMECE 2007; 99-103https://doi.org/10.1115/IMECE2007-43851

Abstract

View Articletitled, An Application of Computer Aided Engineering in Rubber Injection Mold With a Cold Runner System Design and Manufacturing

PDF

Topics: Computer-aided engineering , Design , Manufacturing , Rubber , Injection molding , Raw materials , Rubber products , Errors , Flow (Dynamics) , Gaskets

Information Based Design and Manufacturing

Design and Testing of Gears With Non-Standard Profile

P. Zak, V. Dynybyl

IMECE 2007; 105-112https://doi.org/10.1115/IMECE2007-41027

Abstract

View Articletitled, Design and Testing of Gears With Non-Standard Profile

PDF

Topics: Design , Gears , Testing , Geometry , Damage , Finite element methods , Finite element model , Mechanical drives

Haptic Guided Rigid Body Dynamics Study for Virtual Assembly in Mainstream CAD Systems

Weihang Zhu

IMECE 2007; 113-122https://doi.org/10.1115/IMECE2007-41513

Abstract

View Articletitled, Haptic Guided Rigid Body Dynamics Study for Virtual Assembly in Mainstream CAD Systems

PDF

Topics: Computer-aided design , Dynamics (Mechanics) , Haptics , Virtual assembly , Algorithms , Manufacturing , Simulation , Collisions (Physics) , Computation , Computers

MCAD-ECAD Integration: Overview and Future Research Perspectives

Kenway Chen, Dirk Schaefer

IMECE 2007; 123-132https://doi.org/10.1115/IMECE2007-41705

Abstract

View Articletitled, MCAD-ECAD Integration: Overview and Future Research Perspectives

PDF

Topics: Mechanical computer-aided design , Computer-aided design , Electrical engineering , Computer-aided engineering , Design , Flow (Dynamics) , Modeling

Functional and Behavioral Representation of Product Information for Collaboration in Product Lifecycle

Mehmet Murat Baysal, Mehmet I. Sarigecili, Utpal Roy

IMECE 2007; 133-141https://doi.org/10.1115/IMECE2007-41728

Abstract

View Articletitled, Functional and Behavioral Representation of Product Information for Collaboration in Product Lifecycle

PDF

Topics: Collaboration , Manufacturing , Design , Geometry , Conceptual design , Cycles , Product development

Combination of Virtual and Physical Objects in User-Centered Design of a Mobile Work Machine Cabin

A. Ellman, J. Laitinen, T. Tiainen

IMECE 2007; 143-148https://doi.org/10.1115/IMECE2007-41778

Abstract

View Articletitled, Combination of Virtual and Physical Objects in User-Centered Design of a Mobile Work Machine Cabin

PDF

Topics: Design , Machinery , Engineering prototypes , Computer-aided design , Computer software , Construction , Control panels , Design methodology , Ergonomics , Gages

A Proposed Lexicon for Class Definition in a Product Lifecycle Model

Lowell E. Lingo, Jr., Utpal Roy

IMECE 2007; 149-157https://doi.org/10.1115/IMECE2007-42285

Abstract

View Articletitled, A Proposed Lexicon for Class Definition in a Product Lifecycle Model

PDF

Topics: Ambiguity , Clocks , Conceptual design , Design , Information models , Modeling , Pendulums , Product design , Service life (Equipment)

Handling Frequent Design Changes by Automatic Optimization-Constrained Updates of Parametric CAD Models

K. Eric Bowman, Christopher A. Mattson

IMECE 2007; 159-168https://doi.org/10.1115/IMECE2007-42379

Abstract

View Articletitled, Handling Frequent Design Changes by Automatic Optimization-Constrained Updates of Parametric CAD Models

PDF

Topics: Computer-aided design , Design , Optimization , Engineering design , Weight (Mass)

Towards Managing Long-Term Uncertainties in Product Development

Whitfield J. Fowler, Kos Ishii

IMECE 2007; 169-177https://doi.org/10.1115/IMECE2007-42434

Abstract

View Articletitled, Towards Managing Long-Term Uncertainties in Product Development

PDF

Topics: Decision analysis , Product development , Reliability , Uncertainty , Design , Design methodology , Carbon , Chain , Design under uncertainty , Life cycle costing

An Evaluation Mechanism for Defining Gaps and Overlaps of Product Information Exchange Standards

Mehmet I. Sarigecili, Mehmet Murat Baysal, Utpal Roy, Sudarsan Rachuri, Ram D. Sriram, Mahesh Mani

IMECE 2007; 179-185https://doi.org/10.1115/IMECE2007-42555

Abstract

View Articletitled, An Evaluation Mechanism for Defining Gaps and Overlaps of Product Information Exchange Standards

PDF

Topics: Cycles

Reducing Material Waste Using Six Sigma in Printed Circuit Board Assembly

Naji E. Gebara, Badih Jawad

IMECE 2007; 187-195https://doi.org/10.1115/IMECE2007-42680

Abstract

View Articletitled, Reducing Material Waste Using Six Sigma in Printed Circuit Board Assembly

PDF

Topics: Printed circuit board assemblies , Manufacturing , Profitability

Modeling Continuous System Dynamics in SysML

Thomas A. Johnson, Jonathan M. Jobe, Christiaan J. J. Paredis, Roger Burkhart

IMECE 2007; 197-205https://doi.org/10.1115/IMECE2007-42754

Abstract

View Articletitled, Modeling Continuous System Dynamics in SysML

PDF

Topics: Modeling , System dynamics

Case Study in the Challenges of Integrating CNC Production and Enterprise Systems

S. Venkatesh, B. Sides, J. Michaloski, F. Proctor

IMECE 2007; 207-213https://doi.org/10.1115/IMECE2007-43009

Abstract

View Articletitled, Case Study in the Challenges of Integrating CNC Production and Enterprise Systems

PDF

Topics: Computer numerical control machine tools , Computers , Process control

Using Parameterized Pareto Sets to Model Design Concepts

Richard J. Malak, Jr., Christiaan J. J. Paredis

IMECE 2007; 215-228https://doi.org/10.1115/IMECE2007-43226

Abstract

View Articletitled, Using Parameterized Pareto Sets to Model Design Concepts

PDF

Topics: Design , Tradeoffs , Conceptual design , Decision making , Mechanical drives , Modeling

Run-Time Integration of Robotic Manipulators and Their Controllers

Fredrerick M. Proctor, Christopher J. Scrapper, Benjamin Balaguer

IMECE 2007; 229-235https://doi.org/10.1115/IMECE2007-43362

Abstract

View Articletitled, Run-Time Integration of Robotic Manipulators and Their Controllers

PDF

Topics: Control equipment , Manipulators , Simulation , Kinematics , Robots , Cities , Computer software , Information models , Trajectories (Physics)

The Effectiveness of the Quality Function Deployment in Managing Manufacturing and Transactional Processes

Enzo Gentili, Francesco Aggogeri, Marco Mazzola

IMECE 2007; 237-246https://doi.org/10.1115/IMECE2007-43448

Abstract

View Articletitled, The Effectiveness of the Quality Function Deployment in Managing Manufacturing and Transactional Processes

PDF

Topics: Manufacturing , Design , Drugs , Health care , Cooling , Engineering management , Quality management , Sprays , Transportation systems , Vehicles

Top-Down Decomposition of Multi-Product Requirements Onto Locator Tolerances

Johan Lo¨o¨f, Rikard So¨derberg

IMECE 2007; 247-255https://doi.org/10.1115/IMECE2007-43453

Abstract

View Articletitled, Top-Down Decomposition of Multi-Product Requirements Onto Locator Tolerances

PDF

Topics: Dimensions , Manufacturing , Simulation , Tolerance analysis

Interactive Sketch-Based Digital Prototyping by Using the Level-Set Method

Weihan Zhang, Ming C. Leu

IMECE 2007; 257-264https://doi.org/10.1115/IMECE2007-43738

Abstract

View Articletitled, Interactive Sketch-Based Digital Prototyping by Using the Level-Set Method

PDF

Topics: B-splines , Design , Engineering prototypes , Shapes , Warping

Information Driven Product Development: A Framework for Product Design and Analysis Integration

Angran Xiao

IMECE 2007; 265-273https://doi.org/10.1115/IMECE2007-44055

Abstract

View Articletitled, Information Driven Product Development: A Framework for Product Design and Analysis Integration

PDF

Topics: Decision making , Finite element analysis , Product design , Product development

Materials in Engineering Applications

Redesign Auto Door Using Modularization and Ultra Light Steel Auto Body Structure

I. Haider, S. A. Ali, L. P. Oriet, J. A. Nooks

IMECE 2007; 275-280https://doi.org/10.1115/IMECE2007-41015

Abstract

View Articletitled, Redesign Auto Door Using Modularization and Ultra Light Steel Auto Body Structure

PDF

Topics: Doors , Steel , Design , Weight (Mass) , Manufacturing , Fuel consumption , Fuel efficiency , Fuels , Vehicles

Characterization of Titanium Nitride Films Prepared by DC Reactive Magnetron Sputtering at Different Deposition Time

Kai Yang, Jianqing Jiang, Mingyuan Gu

IMECE 2007; 281-286https://doi.org/10.1115/IMECE2007-41559

Abstract

View Articletitled, Characterization of Titanium Nitride Films Prepared by DC Reactive Magnetron Sputtering at Different Deposition Time

PDF

Topics: Sputtering (Irradiation) , Titanium , Film thickness , Adhesives , Crystal growth , Electron field emission , Grain size , Scanning electron microscopy , Tool steel , X-ray diffraction

Transient Analysis of a Ceramic High Temperature Heat Exchanger and Chemical Decomposer

Valery Ponyavin, Taha Mohamed, Mohamed Trabia, Yitung Chen, Anthony E. Hechanova

IMECE 2007; 287-294https://doi.org/10.1115/IMECE2007-42199

Abstract

View Articletitled, Transient Analysis of a Ceramic High Temperature Heat Exchanger and Chemical Decomposer

PDF

Topics: Ceramics , Heat exchangers , High temperature , Transient analysis , Stress , Failure , Design , Steady state , Transients (Dynamics) , Computer software

Experimental Investigation on PTFE Composites for Journal Bearings

V. Jayaraj, K. Srinivasan

IMECE 2007; 295-303https://doi.org/10.1115/IMECE2007-43067

Abstract

View Articletitled, Experimental Investigation on PTFE Composites for Journal Bearings

PDF

Topics: Composite materials , Journal bearings , Bearings , Lubricants , Metals , Thin films , Boundary lubrication , Contamination , Design , Flow (Dynamics)

Phase Transitions and Thermal Expansion of 10mol%Sc₂O₃-1mol% CeO₂-ZrO₂ Ceramics

Sergey Yarmolenko, Devendra Ray, Devdas Pai, Jag Sankar

IMECE 2007; 305-311https://doi.org/10.1115/IMECE2007-43109

Abstract

View Articletitled, Phase Transitions and Thermal Expansion of 10mol%Sc2O3-1mol% CeO2-ZrO2 Ceramics

PDF

Topics: Ceramics , Phase transitions , Thermal expansion , Temperature , Atomic force microscopy , Design , Differential scanning calorimetry , Durability , High temperature , Phase transition temperature

Structural and Mechanical Properties of Multilayer TiN/CrN Coatings

Manohar S. Konchady, Sergey Yarmolenko, Devdas M. Pai, Jag Sankar

IMECE 2007; 313-318https://doi.org/10.1115/IMECE2007-43114

Abstract

View Articletitled, Structural and Mechanical Properties of Multilayer TiN/CrN Coatings

PDF

Topics: Coatings , Mechanical properties , Wavelength , Atomic force microscopy , Crystals , Dislocations , Fracture toughness , Nanoindentation , Optimization , Sputtering (Irradiation)

Smooth Non-Linear Springs, Particularly Smooth Progressive-Rate Steel Springs

Wieslaw J. Oledzki

IMECE 2007; 319-328https://doi.org/10.1115/IMECE2007-43242

Abstract

View Articletitled, Smooth Non-Linear Springs, Particularly Smooth Progressive-Rate Steel Springs

PDF

Topics: Springs , Steel , Inventions , Design , Manufacturing , Patents , Shapes , Stiffness , Stress , Structural mechanics

The Effect of Conical Indenter Shape on TBC Interfacial Toughness Measurements

Q. Ma, J. L. Beuth, G. H. Meier, F. S. Pettit

IMECE 2007; 329-338https://doi.org/10.1115/IMECE2007-43816

Abstract

View Articletitled, The Effect of Conical Indenter Shape on TBC Interfacial Toughness Measurements

PDF

Topics: Fracture toughness , Shapes , Coatings , Stress , Thermal barrier coatings , Cathode ray oscilloscopes , Ceramic coatings , Computer simulation , Electron beams , Fracture mechanics

Modeling and Innovations in Traditional and Non-Traditional Machining Processes

Virtual Five-Axis Flank Milling of Jet Engine Impellers: Part 1 — Mechanics of Five-Axis Flank Milling

W. Ferry, Y. Altintas

IMECE 2007; 339-353https://doi.org/10.1115/IMECE2007-41351

Abstract

View Articletitled, Virtual Five-Axis Flank Milling of Jet Engine Impellers: Part 1 — Mechanics of Five-Axis Flank Milling

PDF

Topics: Impellers , Jet engines , Milling , Cutting , Blades , Cutting tools , Databases , Deflection , Engineering prototypes , Force measurement

Virtual Five-Axis Flank Milling of Jet Engine Impellers: Part 2 — Feed Rate Optimization of Five-Axis Flank Milling

W. Ferry, Y. Altintas

IMECE 2007; 355-369https://doi.org/10.1115/IMECE2007-41353

Abstract

View Articletitled, Virtual Five-Axis Flank Milling of Jet Engine Impellers: Part 2 — Feed Rate Optimization of Five-Axis Flank Milling

PDF

Topics: Impellers , Jet engines , Milling , Optimization , Machinery , Algorithms , Stress , Deflection , Torque , Adaptive control

Geometric Modeling of Cutter/Workpiece Engagements in 3-Axis Milling Using Polyhedral Models

Eyyup Aras, Derek Yip-Hoi

IMECE 2007; 371-382https://doi.org/10.1115/IMECE2007-41414

Abstract

View Articletitled, Geometric Modeling of Cutter/Workpiece Engagements in 3-Axis Milling Using Polyhedral Models

PDF

Topics: Geometric modeling , Machining , Milling

Cutter-Workpiece Engagement Calculations by Parallel Slicing for Five-Axis Flank Milling of Jet Engine Impellers

W. Ferry, D. Yip-Hoi

IMECE 2007; 383-392https://doi.org/10.1115/IMECE2007-41434

Abstract

View Articletitled, Cutter-Workpiece Engagement Calculations by Parallel Slicing for Five-Axis Flank Milling of Jet Engine Impellers

PDF

Topics: Impellers , Jet engines , Milling , Cutting , Machining , Solid modeling , American Petroleum Institute , Computational methods , Computer programming , Computer software

3-D Lithography by CCFL Exposure

Zong-Ting Yuan, Cheng-Chang Lee, Horng-Jou Wang, Heng-Chung Chang, Huang-Kun Chen, Tai-Kang Shing

IMECE 2007; 393-397https://doi.org/10.1115/IMECE2007-41733

Abstract

View Articletitled, 3-D Lithography by CCFL Exposure

PDF

Topics: Lithography , Manufacturing , Etching , Machining , Metals , Microfabrication , Surface roughness

Wheel Wear Mechanisms in Rotary Ultrasonic Machining of Titanium

N. J. Churi, Z. J. Pei, C. Treadwell

IMECE 2007; 399-407https://doi.org/10.1115/IMECE2007-41831

Abstract

View Articletitled, Wheel Wear Mechanisms in Rotary Ultrasonic Machining of Titanium

PDF

Topics: Titanium , Ultrasonic machining , Wear , Wheels

Micro Electro Discharge Machining of CNT-Based Nanocomposite Materials

Yi Wan, Dae-Wook Kim, Jae-Soon Jang, Young-Bin Park

IMECE 2007; 409-413https://doi.org/10.1115/IMECE2007-41961

Abstract

View Articletitled, Micro Electro Discharge Machining of CNT-Based Nanocomposite Materials

PDF

Topics: Carbon nanotubes , Electrical discharge machining , Nanocomposites , Composite materials , Polymer composites , Casting , Ceramic composites , Design , Experimental design , Hot pressing

The Kinematics of Conical Involute Gear Hobbing

Carlo Innocenti

IMECE 2007; 415-424https://doi.org/10.1115/IMECE2007-41982

Abstract

View Articletitled, The Kinematics of Conical Involute Gear Hobbing

PDF

Topics: Gears , Kinematics

Deformation Analysis of Aero Thin-Walled Workpiece Under Multi-Stress Coupled Effect

Dong Lu, Jianfeng Li, Yiming Rong, Jie Sun, Song Zhang, Jun Zhou, Feng Jiang

IMECE 2007; 425-430https://doi.org/10.1115/IMECE2007-42129

Abstract

View Articletitled, Deformation Analysis of Aero Thin-Walled Workpiece Under Multi-Stress Coupled Effect

PDF

Topics: Deformation , Stress , Machining , Milling , Clamps (Tools) , Cutting , Cutting tools , Finite element model

Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Generator

Yi-Pei Shih, Zhang-Hua Fong

IMECE 2007; 431-440https://doi.org/10.1115/IMECE2007-43017

Abstract

View Articletitled, Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Generator

PDF

Topics: Computer numerical control machine tools , Generators , Spiral bevel gears , Machinery , Bearings , Computers , Cutting , Deformation , Errors , Geometry

Simulation of Chatter Vibrations in Reaming

M. Sajjadi, M. R. Movahhedy

IMECE 2007; 441-447https://doi.org/10.1115/IMECE2007-43028

Abstract

View Articletitled, Simulation of Chatter Vibrations in Reaming

PDF

Topics: Chatter , Simulation , Vibration

Sliding Mode Control of the Turning Process for Eliminating Regenerative Chatter in the Presence of Paremetric Uncertainties

H. Moradi, M. R. Movahhedy, G. R. Vosoughi

IMECE 2007; 449-456https://doi.org/10.1115/IMECE2007-43029

Abstract

View Articletitled, Sliding Mode Control of the Turning Process for Eliminating Regenerative Chatter in the Presence of Paremetric Uncertainties

PDF

Topics: Chatter , Sliding mode control , Turning , Uncertainty , Wear

Reconstruction Method for Complex Groove of Milling Insert Using Local Rule of Cellular Automata

Guangyu Tan, Guangjun Liu, Guanghui Li, Yiming Rong, Hui Song

IMECE 2007; 457-461https://doi.org/10.1115/IMECE2007-43158

Abstract

View Articletitled, Reconstruction Method for Complex Groove of Milling Insert Using Local Rule of Cellular Automata

PDF

Topics: Milling

Characterization of Micro-Features in Polymeric Drug Delivery Devices Using FDM

S. H. Masood, Shivdeep Singh

IMECE 2007; 463-470https://doi.org/10.1115/IMECE2007-43298

Abstract

View Articletitled, Characterization of Micro-Features in Polymeric Drug Delivery Devices Using FDM

PDF

Topics: Drug delivery systems , Drugs , Manufacturing , Modeling , Porosity , Rapid prototyping

Abrasive Waterjet Peening With Elastic Prestress: Subsurface Residual Stress Distribution

Balaji Sadasivam, Alpay Hizal, Dwayne Arola

IMECE 2007; 471-475https://doi.org/10.1115/IMECE2007-43473

Abstract

View Articletitled, Abrasive Waterjet Peening With Elastic Prestress: Subsurface Residual Stress Distribution

PDF

Topics: Shot peening , Stress , Stress concentration , ASTM International , Steel , Residual stresses , Surface finishing , Surface texture , Yield strength

Repeatability Analysis on the Tool Point Dynamics for Investigation on Uncertainty in Milling Stability

Kang-Jae Lee, M. Alkan Donmez

IMECE 2007; 477-483https://doi.org/10.1115/IMECE2007-43480

Abstract

View Articletitled, Repeatability Analysis on the Tool Point Dynamics for Investigation on Uncertainty in Milling Stability

PDF

Topics: Dynamics (Mechanics) , Milling , Stability , Uncertainty , Machining , Chatter , Instrumentation

Compressive Residual Stresses Effect on Fatigue Life of Rolling Bearings

Spiridon S. Cretu, Marcelin I. Benchea, Ovidiu S. Cretu

IMECE 2007; 485-490https://doi.org/10.1115/IMECE2007-43561

Abstract

View Articletitled, Compressive Residual Stresses Effect on Fatigue Life of Rolling Bearings

PDF

Topics: Fatigue life , Residual stresses , Rolling bearings , Stress , Ball bearings , Fatigue , Cycles , Deformation , Fast Fourier transforms , Geometry

An Ablation Parameter Study and Micromachining of NiTi Based Shape Memory Alloy Using Femtosecond Laser

Nitin Uppal, Panos S. Shiakolas

IMECE 2007; 491-496https://doi.org/10.1115/IMECE2007-43610

Abstract

View Articletitled, An Ablation Parameter Study and Micromachining of NiTi Based Shape Memory Alloy Using Femtosecond Laser

PDF

Topics: Ablation (Vaporization technology) , Lasers , Micromachining , Nickel titanium alloys , Shape memory alloys , Machining , Microelectromechanical systems , Microfabrication , Nickel , Smart materials

Numerical Simulation of Thermal Stress Fields in Thermoplastics in a Pulsed Laser Welding Process

Gregory J. Kowalski, Richard A. Whalen

IMECE 2007; 497-508https://doi.org/10.1115/IMECE2007-43678

Abstract

View Articletitled, Numerical Simulation of Thermal Stress Fields in Thermoplastics in a Pulsed Laser Welding Process

PDF

Topics: Computer simulation , Laser welding , Thermal stresses , Welding , Density , Heat , Heat conduction , Laser beams , Lasers , Shapes

Finite Element Modeling of Random Multiphase Materials for Micromachining

Y. B. Guo, S. Anurag

IMECE 2007; 509-515https://doi.org/10.1115/IMECE2007-43848

Abstract

View Articletitled, Finite Element Modeling of Random Multiphase Materials for Micromachining

PDF

Topics: Finite element analysis , Micromachining , Modeling

Measurement Methods of Pad Properties for Chemical Mechanical Polishing

X. H. Zhang, Z. J. Pei, Graham R. Fisher

IMECE 2007; 517-522https://doi.org/10.1115/IMECE2007-44013

Abstract

View Articletitled, Measurement Methods of Pad Properties for Chemical Mechanical Polishing

PDF

Topics: Polishing , Semiconductor wafers

Symposium on Advances in Design for Product Sound Quality

A Study on the Sound Quality Evaluation Model of the Air Cleaner

Jeong-Guon Ih, Su-Won Jang, Cheol-Ho Jeong, Youn-Young Jeung, Kye-Sup Jun

IMECE 2007; 523-526https://doi.org/10.1115/IMECE2007-41115

Abstract

View Articletitled, A Study on the Sound Quality Evaluation Model of the Air Cleaner

PDF

Topics: Sound quality , Electromagnetic spectrum , Loudness (Acoustics) , Design , Noise (Sound) , Pollution , Principal component analysis , Signals , Surface roughness

Tire Sound Quality Evaluation Tool Using Sound Synthesis With Physical Modeling

Masao Ishihama, Akane Shimizu, Yu Kakumoto, Masato Hayashi

IMECE 2007; 527-533https://doi.org/10.1115/IMECE2007-41142

Abstract

View Articletitled, Tire Sound Quality Evaluation Tool Using Sound Synthesis With Physical Modeling

PDF

Topics: Modeling , Sound quality , Tires , Excitation , Pavement , Finite element model , Vibration , Filters , Texture (Materials) , Automotive engineers

Effects of Non-Geometric Features and Incentive Schemes on Manual Assembly of System Variants: An Experimental Study

Ramaprasad E. Lakshminarayana, Shun Takai

IMECE 2007; 535-544https://doi.org/10.1115/IMECE2007-42419

Abstract

View Articletitled, Effects of Non-Geometric Features and Incentive Schemes on Manual Assembly of System Variants: An Experimental Study

PDF

Topics: Design , Manufacturing

Sensitivity of Relative Worth in QFD Matrices to Rating Scales and Worth Calculation Schemes: An Empirical Study

Robins M. Kalapurackal, Shun Takai

IMECE 2007; 545-552https://doi.org/10.1115/IMECE2007-42423

Abstract

View Articletitled, Sensitivity of Relative Worth in QFD Matrices to Rating Scales and Worth Calculation Schemes: An Empirical Study

PDF

Topics: Decision making , Design , Engineers , Sensitivity analysis

Effects of Individual and Team Competitive Rewards on Collaboration and Productivity of Team

Kumar Boggavarapu, Nanda K. Veluru, Shun Takai

IMECE 2007; 553-560https://doi.org/10.1115/IMECE2007-42427

Abstract

View Articletitled, Effects of Individual and Team Competitive Rewards on Collaboration and Productivity of Team

PDF

Topics: Collaboration , Teams , Tradeoffs , Concurrent engineering , Design , Engineering disciplines , Engineers

Symposium on Design and Manufacturing of Composites

An Investigation on Effect of Workpiece Reinforcement Percentage on Tool Wear in Cutting Al-SiC Metal Matrix Composites

C. Avinash, S. Ramaswamy, S. Raguraman, N. Muthukrishnan

IMECE 2007; 561-566https://doi.org/10.1115/IMECE2007-41231

Abstract

View Articletitled, An Investigation on Effect of Workpiece Reinforcement Percentage on Tool Wear in Cutting Al-SiC Metal Matrix Composites

PDF

Topics: Cutting , Metal matrix composites , Wear , Machining , Particulate matter , Silicon , Aluminum alloys , Casting , Diamonds , Experimental design

Computer Simulation of Deep Drawing Process for a Laminated Composite Cup

Tushar Naik, Zhong Hu

IMECE 2007; 567-572https://doi.org/10.1115/IMECE2007-41593

Abstract

View Articletitled, Computer Simulation of Deep Drawing Process for a Laminated Composite Cup

PDF

Topics: Composite materials , Computer simulation , Fibers , Aluminum alloys , Design , Stress , Anisotropy , Finite element analysis , Finite element model , Glass

On the Optimisation Into Wire Electro-Discharge Machining of Al/Al₂O_3P Composites

N. G. Patil, P. K. Brahmankar, L. G. Navale

IMECE 2007; 573-582https://doi.org/10.1115/IMECE2007-41775

Abstract

View Articletitled, On the Optimisation Into Wire Electro-Discharge Machining of Al/Al2O3P Composites

PDF

Topics: Composite materials , Machining , Optimization , Wire , Cutting , Metal matrix composites , Machinery , Particulate matter , Pressure , Servomechanisms

Uncertainty Modeling of Residual Stress Development in Polymeric Composites Manufactured With Resin Transfer Molding Process

Kuang-Ting Hsiao

IMECE 2007; 583-589https://doi.org/10.1115/IMECE2007-42226

Abstract

View Articletitled, Uncertainty Modeling of Residual Stress Development in Polymeric Composites Manufactured With Resin Transfer Molding Process

PDF

Topics: Modeling , Polymer composites , Resins , Stress , Transfer molding , Uncertainty , Composite materials , Chemical reactions , Cycles , Failure

Effects of Slugger Drill Bits in Drilling of Composites

Ashkan Sahraie Jahromi, Behnam Bahr, Rupindersingh Bassi, Arvind S. Kolhar

IMECE 2007; 591-596https://doi.org/10.1115/IMECE2007-42538

Abstract

View Articletitled, Effects of Slugger Drill Bits in Drilling of Composites

PDF

Topics: Bits (Tools) , Composite materials , Drilling , Delamination , Thrust , Chisels , Hole quality , Damage , Drills (Tools) , Extruding

Measurement of 3-D Orientation and 3-D Orientation Tensors in Polymer/Nanofiber Composites

Monon Mahboob, Stephen E. Bechtel

IMECE 2007; 597-605https://doi.org/10.1115/IMECE2007-42671

Abstract

View Articletitled, Measurement of 3-D Orientation and 3-D Orientation Tensors in Polymer/Nanofiber Composites

PDF

Topics: Composite materials , Nanofibers , Polymers , Tensors , Fibers , Dimensions , Carbon , Imaging , Polymer composites , Statistical distributions

Processing and Performance Evaluation of Nanoclay Infused EPON828

Mahesh V. Hosur, Orion Gebremedhin, Shaik Jeelani

IMECE 2007; 607-618https://doi.org/10.1115/IMECE2007-43830

Abstract

View Articletitled, Processing and Performance Evaluation of Nanoclay Infused EPON828

PDF

Topics: Nanoclays , Nanocomposites , Performance evaluation , Fracture (Materials) , Polymers , Compression , Epoxy adhesives , Epoxy resins , Mechanical properties , Nanoparticles

An Investigation on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites

B. F. Yousif, K. J. Wong, N. S. M. El-Tayeb

IMECE 2007; 619-624https://doi.org/10.1115/IMECE2007-44012

Abstract

View Articletitled, An Investigation on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites

PDF

Topics: Composite materials , Compression , Fibers , Polyester fabrics , Tensile strength , Bending strength , Equipment performance , Fracture (Materials) , Fracture (Process) , Mechanical properties

Symposium on Joining Technologies for Advanced Materials and Structures

Friction Stir Welding of Aluminum 7136-T76511 Extrusions for Aerospace Applications

Carter Hamilton, Stanisław Dymek, Marek Blicharski

IMECE 2007; 625-630https://doi.org/10.1115/IMECE2007-41154

Abstract

View Articletitled, Friction Stir Welding of Aluminum 7136-T76511 Extrusions for Aerospace Applications

PDF

Topics: Aerospace industry , Aluminum , Friction , Welding , Corrosion , Corrosion resistance , Fracture (Materials) , Fracture (Process) , Heat , Testing

Effect of Notch Location on the Stress Concentration and Reliability of Notched Composite Laminates Based on a Probabilistic Approach

R. Ganesan, A. K. Arumugam

IMECE 2007; 631-632https://doi.org/10.1115/IMECE2007-41178

Abstract

View Articletitled, Effect of Notch Location on the Stress Concentration and Reliability of Notched Composite Laminates Based on a Probabilistic Approach

PDF

Topics: Composite materials , Laminates , Reliability , Stress concentration , Aerospace industry , Aircraft , Carbon , Carbon reinforced plastics , Delamination , Design

Three-Dimensional Finite Element Analysis of Mixed-Mode Interfacial Delamination for the Pull-Off Test

Zuo Sun, David A. Dillard

IMECE 2007; 633-641https://doi.org/10.1115/IMECE2007-41291

Abstract

View Articletitled, Three-Dimensional Finite Element Analysis of Mixed-Mode Interfacial Delamination for the Pull-Off Test

PDF

Topics: Delamination , Finite element analysis

Utilization of Process Monitoring in Ti Alloy Welding

Z. Sun, D. Pan

IMECE 2007; 643-647https://doi.org/10.1115/IMECE2007-41376

Abstract

View Articletitled, Utilization of Process Monitoring in Ti Alloy Welding

PDF

Topics: Process monitoring , Titanium alloys , Welding , Signals , Alloys , Data acquisition systems , Plates (structures) , Quality control , Tungsten , Welded joints

Numerical Study of the Tool Rake Angle Effect on the Material Flow in Friction Stir Welding Process

Hosein Atharifar, Radovan Kovacevic

IMECE 2007; 649-657https://doi.org/10.1115/IMECE2007-41962

Abstract

View Articletitled, Numerical Study of the Tool Rake Angle Effect on the Material Flow in Friction Stir Welding Process

PDF

Topics: Flow (Dynamics) , Friction , Stress , Welding

Simulation of Tensile Behavior in Friction Stir Welded and Superplastically Formed Titanium 6 Al-4V Alloy

Paul D. Edwards, Daniel G. Sanders, M. Ramulu

IMECE 2007; 659-664https://doi.org/10.1115/IMECE2007-42550

Abstract

View Articletitled, Simulation of Tensile Behavior in Friction Stir Welded and Superplastically Formed Titanium 6 Al-4V Alloy

PDF

Topics: Alloys , Friction , Simulation , Titanium , Computer simulation , Modeling , Simulation results

Finite Element Modeling of Spot Welding for Advanced High Strength Steels (AHSS)

Sankaran Subramaniam, Ramakrishna Koganti, Armando Joaquin

IMECE 2007; 665-668https://doi.org/10.1115/IMECE2007-42673

Abstract

View Articletitled, Finite Element Modeling of Spot Welding for Advanced High Strength Steels (AHSS)

PDF

Topics: Finite element analysis , Finite element methods , High strength steel , Modeling , Welding , Steel , Gages , Physics , Regulations , Safety

Resistance Spot Welding (RSW) of Advanced High Strength Steels (AHSS) for Automotive Body Construction

Ramakrishna Koganti, Sergio Angotti, Armando Joaquin, Cindy Jiang

IMECE 2007; 669-675https://doi.org/10.1115/IMECE2007-42675

Abstract

View Articletitled, Resistance Spot Welding (RSW) of Advanced High Strength Steels (AHSS) for Automotive Body Construction

PDF

Topics: Construction , Electrodes , High strength steel , Microhardness , Welding , Steel , Mechanical properties , Corporate average fuel economy , Fuel efficiency , Manufacturing

Macro/Micro Mechanical Level Characterization of Spot Friction Welded Lap Joints in 6111 Aluminum Alloy Using Combined Experimental/Numerical Approaches

Srinivasa D. Thoppul, Ronald F. Gibson

IMECE 2007; 677-687https://doi.org/10.1115/IMECE2007-42721

Abstract

View Articletitled, Macro/Micro Mechanical Level Characterization of Spot Friction Welded Lap Joints in 6111 Aluminum Alloy Using Combined Experimental/Numerical Approaches

PDF

Topics: Aluminum alloys , Friction , Base metals , Testing , Vibration , Bending (Stress) , Damping , Displacement , Elastic moduli , Electromagnetic scattering

Ultrasonic Welding of Aluminum 6111: Reliability and Maintainability Study of Robot Mounted C-Gun Welding System

Hasetetsion G. Mariam, J. Rick Baer, David J. Scholl, Ronald P. Cooper, Daniel E. Wilkosz, Anthony J. Grima, Larry V. Reatherford

IMECE 2007; 689-697https://doi.org/10.1115/IMECE2007-42929

Abstract

View Articletitled, Ultrasonic Welding of Aluminum 6111: Reliability and Maintainability Study of Robot Mounted C-Gun Welding System

PDF

Topics: Aluminum , Maintainability , Reliability , Robots , Ultrasonic welding , Welding , Welded joints , Construction , Failure , Metals

Laser Hybrid Welding of Advanced High Strength Steels (AHSS) for Automotive Body Construction

Ramakrishna Koganti, Sergio Angotti, Armando Joaquin, Eric Stiles

IMECE 2007; 699-703https://doi.org/10.1115/IMECE2007-43415

Abstract

View Articletitled, Laser Hybrid Welding of Advanced High Strength Steels (AHSS) for Automotive Body Construction

PDF

Topics: Construction , Heat , High strength steel , Lasers , Welding

Gas Metal Arc Welding (GMAW) Process Optimization for Uncoated Dual Phase 600 Material Combination With Aluminized Coated and Uncoated Boron Steels for Automotive Body Structural Applications

Ramakrishna Koganti, Sergio Angotti, Armando Joaquin, Cindy Jiang, Chris Karas

IMECE 2007; 705-713https://doi.org/10.1115/IMECE2007-43419

Abstract

View Articletitled, Gas Metal Arc Welding (GMAW) Process Optimization for Uncoated Dual Phase 600 Material Combination With Aluminized Coated and Uncoated Boron Steels for Automotive Body Structural Applications

PDF

Topics: Boron , Fatigue , Gas metal arc welding , Optimization , Steel

Gas Metal Arc Welded (GMAW) Joint Strength Comparison of Aluminum Sheet (5754) and Exturded (6063) Alloys

Ramakrishna Koganti, Armando Joaquin, Matthew Zaluzec, Chris Karas

IMECE 2007; 715-723https://doi.org/10.1115/IMECE2007-43423

Abstract

View Articletitled, Gas Metal Arc Welded (GMAW) Joint Strength Comparison of Aluminum Sheet (5754) and Exturded (6063) Alloys

PDF

Topics: Alloys , Aluminum , Gas metal arc welding , Metals , Heat , Gas flow , Failure , Joining , Vehicles , Aluminum alloys

Monitoring of Impact Damage in Composites Using Wave Propagation Methods

G. P. Tandon, J. Kang, R. Y. Kim, T. J. Whitney

IMECE 2007; 725-726https://doi.org/10.1115/IMECE2007-43567

Abstract

View Articletitled, Monitoring of Impact Damage in Composites Using Wave Propagation Methods

PDF

Topics: Composite materials , Damage , Wave propagation , Signals , Waves , Acoustics , Aircraft , Hammers , Laminates , Stress

Composite Scarf Repair Patch Optimization Under Uniaxial Loading Conditions

T. D. Breitzman, B. M. Cook, G. A. Schoeppner, E. V. Iarve

IMECE 2007; 727-729https://doi.org/10.1115/IMECE2007-43588

Abstract

View Articletitled, Composite Scarf Repair Patch Optimization Under Uniaxial Loading Conditions

PDF

Topics: Composite materials , Maintenance , Optimization , Failure , Stress , Adhesives , Fibers , Modeling , Optimization algorithms

Design and Analysis of Ultrasonic Assisted Friction Stir Welding

Kwanghyun Park, Gap-Yong Kim, Jun Ni

IMECE 2007; 731-737https://doi.org/10.1115/IMECE2007-44007

Abstract

View Articletitled, Design and Analysis of Ultrasonic Assisted Friction Stir Welding

PDF

Topics: Design , Friction , Welding , Bonding , Machining , Manufacturing , Mechanical properties , Tooling , Ultrasonics , Welding equipment

A Simple and Practical Solution for Characterization of Adhesively Bonded Joints in Dissimilar Materials

Khaled Shahin, Farid Taheri

IMECE 2007; 739-744https://doi.org/10.1115/IMECE2007-44115

Abstract

View Articletitled, A Simple and Practical Solution for Characterization of Adhesively Bonded Joints in Dissimilar Materials

PDF

Topics: Adhesive joints , Adhesives , Aluminum , Bonding , Composite materials , Design , Fiber reinforced plastics , Fibers , Finite element analysis , Joining

All Years

Proceedings Papers

Design and Manufacturing

Advances in Materials Forming

Deformation and Structural Development of Polymer in Manufacturing

Energetic and Multifunctional Materials and Their Applications

Information Based Design and Manufacturing

Materials in Engineering Applications

Modeling and Innovations in Traditional and Non-Traditional Machining Processes

Symposium on Advances in Design for Product Sound Quality

Symposium on Design and Manufacturing of Composites

Symposium on Joining Technologies for Advanced Materials and Structures

Email alerts

Most Read Proceedings Papers in IMECE

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only