Topics: Cardiovascular system , Finite element model , Printing , Computer-aided design , Hydrogels , Mechanical properties , Porosity , Biological tissues , Chemical properties , Design

Development of a Bone Drilling Simulation System With Force Feedback

Xiaoyi Chi, Qiang Niu, Viral S. Thakkar, Ming C. Leu

IMECE 2005; 83-89https://doi.org/10.1115/IMECE2005-79315

Abstract

View Articletitled, Development of a Bone Drilling Simulation System With Force Feedback

PDF

Topics: Bone , Drilling , Force feedback , Haptics , Orthopedics , Simulation , Surgery

Large Medical Data Manipulation for Bone Surgery Simulation

Qiang Niu, Xiaoyi Chi, Ming C. Leu

IMECE 2005; 91-97https://doi.org/10.1115/IMECE2005-79336

Abstract

View Articletitled, Large Medical Data Manipulation for Bone Surgery Simulation

PDF

Topics: Biomedicine , Bone , Simulation , Surgery , Computerized tomography , Computers , Biomedical imaging , Data acquisition , Geometric modeling , Haptics

Space Filling Curves: Its Design and Fabrication for Extrusion Based SFF Systems

Binil Starly, Lauren Shor, Wei Sun, Andrew Darling

IMECE 2005; 99-104https://doi.org/10.1115/IMECE2005-79742

Abstract

View Articletitled, Space Filling Curves: Its Design and Fabrication for Extrusion Based SFF Systems

PDF

Topics: Design , Extruding , Manufacturing , Computer-aided design , Tissue engineering , Generators , Porosity , Shapes , Stereolithography , Tissue scaffolds

Two-Photon Polymerization Technique for Bio-Applications

Aleksandr V. Ovsianikov, Boris N. Chichkov

IMECE 2005; 105-108https://doi.org/10.1115/IMECE2005-79873

Abstract

View Articletitled, Two-Photon Polymerization Technique for Bio-Applications

PDF

Topics: Photons , Polymerization , Lasers , Manufacturing , Resins , Computers , Nanostructures , Polymers , Resolution (Optics) , Sapphire

Tool Selection and Path Control for Automated Anterior Teeth Coronal Canal Treatment Preparation

J. Dong, S. Y. Hong, G. Hasselgren

IMECE 2005; 109-117https://doi.org/10.1115/IMECE2005-80473

Abstract

View Articletitled, Tool Selection and Path Control for Automated Anterior Teeth Coronal Canal Treatment Preparation

PDF

Topics: Canals , Production planning , Computer-aided engineering , Bridges (Structures) , Computers , Design , Geometry , Machinery , Manufacturing , Technology development

Novel Manufacturing Process of Nanocomposite Hydrogel For Bio-Applications

Kazutoshi Haraguchi, Toru Takehisa

IMECE 2005; 119-126https://doi.org/10.1115/IMECE2005-80533

Abstract

View Articletitled, Novel Manufacturing Process of Nanocomposite Hydrogel For Bio-Applications

PDF

Topics: Biomaterials , Hydrogels , Manufacturing , Nanocomposites , Sterilization

Manufacturing System Development for Fabrication of Bone Scaffold

Lin Lu, Robert S. Dembzynski, Mark J. Mondrinos, David Wootton, Peter I. Lelkes, Jack Zhou

IMECE 2005; 127-136https://doi.org/10.1115/IMECE2005-80937

Abstract

View Articletitled, Manufacturing System Development for Fabrication of Bone Scaffold

PDF

Topics: Bone , Manufacturing , Manufacturing systems , Machinery , Biocompatibility , Biomaterials , Rapid prototyping , Resolution (Optics) , Tissue engineering , Biomimetics

Direct Freeform Fabrication Technique for Bio-Manufacturing of Pre-Seeded, Spatially Heterogeneous, Anatomically-Shaped Alginate Hydrogel Implants

Daniel L. Cohen, Evan Malone, Hod Lipson, Lawrence J. Bonassar

IMECE 2005; 137-141https://doi.org/10.1115/IMECE2005-81067

Abstract

View Articletitled, Direct Freeform Fabrication Technique for Bio-Manufacturing of Pre-Seeded, Spatially Heterogeneous, Anatomically-Shaped Alginate Hydrogel Implants

PDF

Topics: Biomanufacturing , Hydrogels , Manufacturing , Tissue engineering , Biological tissues , Elastic moduli , Injection molding , Orthopedics , Robotics , Stereolithography

Toward the Fabrication of Hierarchically-Structured Porous Polymers for Tissue Engineering Scaffords

Hai Wang, Wei Li

IMECE 2005; 143-150https://doi.org/10.1115/IMECE2005-81140

Abstract

View Articletitled, Toward the Fabrication of Hierarchically-Structured Porous Polymers for Tissue Engineering Scaffords

PDF

Topics: Manufacturing , Polymers , Tissue engineering , Ultrasound

Formation of Highly Aligned Grooves on the Inner Surface of Semi-Permeable Hollow Fiber Membrane for the Directional Axonal Outgrowth

Yu Long, Changhong Zhang, Ning Zhang, Yong Huang, Xuejun Wen

IMECE 2005; 151-159https://doi.org/10.1115/IMECE2005-81235

Abstract

View Articletitled, Formation of Highly Aligned Grooves on the Inner Surface of Semi-Permeable Hollow Fiber Membrane for the Directional Axonal Outgrowth

PDF

Topics: Fibers , Membranes , Texture (Materials) , Flow (Dynamics) , Manufacturing , Polymer solutions , Urethane elastomers , Water , Damage , Dynamics (Mechanics)

Stereolithography of PEG Hydrogel Multi-Lumen Nerve Regeneration Conduits

K. Arcaute, L. Ochoa, B. K. Mann, R. B. Wicker

IMECE 2005; 161-167https://doi.org/10.1115/IMECE2005-81436

Abstract

View Articletitled, Stereolithography of PEG Hydrogel Multi-Lumen Nerve Regeneration Conduits

PDF

Topics: Hydrogels , Stereolithography

Computer-Aided Design, Manufacturing, and Modeling of Polymer Scaffolds for Tissue Engineering

James J.-S. Stone, Andrew R. Thoreson, Kurt L. Langner, Jay M. Norton, Daniel J. Stone, Francis W. Wang, Shawn W. O’Driscoll, Kai-Nan An

IMECE 2005; 169-174https://doi.org/10.1115/IMECE2005-81621

Abstract

View Articletitled, Computer-Aided Design, Manufacturing, and Modeling of Polymer Scaffolds for Tissue Engineering

PDF

Topics: Computer-aided design , Manufacturing , Modeling , Polymers , Tissue scaffolds , Biomaterials , Finite element analysis , Reservoirs , Nozzles , Biomanufacturing

Unit Block Library of Basic Architectures for Use in Computer-Aided Tissue Engineering of Bone Replacement Scaffolds

M. Wettergreen, B. Bucklen, B. Starly, E. Yuksel, W. Sun, M. A. K. Liebschner

IMECE 2005; 175-181https://doi.org/10.1115/IMECE2005-81984

Abstract

View Articletitled, Unit Block Library of Basic Architectures for Use in Computer-Aided Tissue Engineering of Bone Replacement Scaffolds

PDF

Topics: Architecture , Bone , Computer-aided engineering , Tissue engineering , Design , Biological tissues , Manufacturing , Finite element analysis , Mechanical stability , Computer-aided design

Surface-Based Scaffold Design: A Mechanobiological Approach

B. Bucklen, M. Wettergreen, M. Heinkenschloss, M. A. K. Liebschner

IMECE 2005; 183-189https://doi.org/10.1115/IMECE2005-81985

Abstract

View Articletitled, Surface-Based Scaffold Design: A Mechanobiological Approach

PDF

Topics: Design , Stress , Bone , Architecture , Anisotropy , Boundary-value problems , Computer software , Computer-aided engineering , Density , Displacement

Micro-Particle Fabrication for Tissue Engineering Applications Using Rapid Prototyping and Soft Lithography Principles

M. Wettergreen, J. Scheffe, A. G. Mikos, M. A. K. Liebschner

IMECE 2005; 191-196https://doi.org/10.1115/IMECE2005-81990

Abstract

View Articletitled, Micro-Particle Fabrication for Tissue Engineering Applications Using Rapid Prototyping and Soft Lithography Principles

PDF

Topics: Lithography , Manufacturing , Microparticles , Rapid prototyping , Tissue engineering , Shapes , Additive manufacturing , Drug delivery systems , Drugs , Extruding

Computer-Aided Tissue Engineering in Whole Bone Replacement Treatment

M. Wettergreen, B. Bucklen, W. Sun, M. A. K. Liebschner

IMECE 2005; 197-206https://doi.org/10.1115/IMECE2005-82000

Abstract

View Articletitled, Computer-Aided Tissue Engineering in Whole Bone Replacement Treatment

PDF

Topics: Bone , Computer-aided engineering , Tissue engineering , Design , Computer-aided design , Blocks (Building materials) , Optimization , Stress , Architecture , Bearings

NIST Development of Reference Material Scaffolds for Tissue Engineering

Joy P. Dunkers, Stefan D. Leigh, Marcus T. Cicerone, Forrest A. Landis, Francis W. Wang, John A. Tesk

IMECE 2005; 207-212https://doi.org/10.1115/IMECE2005-82012

Abstract

View Articletitled, NIST Development of Reference Material Scaffolds for Tissue Engineering

PDF

Topics: National Institute of Standards and Technology , Tissue scaffolds , ASTM International , Engineering prototypes , Porosity , Testing , Tissue engineered devices , Architecture , Biodegradation , Food and Drug Administration

Osteoblast Adhesion on Tissue Engineering Scaffolds Made by Bio-Manufacturing Techniques

T. Dutta Roy, J. J. Stone, W. Sun, E. H. Cho, S. J. Lockett, F. W. Wang, L. Henderson

IMECE 2005; 213-216https://doi.org/10.1115/IMECE2005-82472

Abstract

View Articletitled, Osteoblast Adhesion on Tissue Engineering Scaffolds Made by Bio-Manufacturing Techniques

PDF

Topics: Adhesion , Biomanufacturing , Osteoblasts , Tissue scaffolds , Imaging , National Institute of Standards and Technology , Materials properties , Rapid prototyping , Shapes , Struts (Engineering)

Requirements for the Manufacturing of Scaffold Biomaterial With Features at Multiple Scales

I. M. Sebastine, D. J. Williams

IMECE 2005; 217-227https://doi.org/10.1115/IMECE2005-82515

Abstract

View Articletitled, Requirements for the Manufacturing of Scaffold Biomaterial With Features at Multiple Scales

PDF

Topics: Biomaterials , Manufacturing , Biological tissues , Tissue engineering , Adhesion , Biocompatibility , Design , Shapes , Tissue scaffolds

Advances in Material Forming

Superplastic Forming Formula for Aluminum Channel Panels

Frank G. Lee, M. David Hanna

IMECE 2005; 229-235https://doi.org/10.1115/IMECE2005-79008

Abstract

View Articletitled, Superplastic Forming Formula for Aluminum Channel Panels

PDF

Topics: Aluminum , Finite element analysis , Superplastic forming

Laser Digitizer/Stereo Vision Methods for Simultaneous Measurement/Analysis of Sheet Metal Forming Strain/Geometry

H.-L. Chan, J. P. Mitchell, A. D. Spence, M. P. Sklad, D. W. Capson

IMECE 2005; 237-246https://doi.org/10.1115/IMECE2005-79216

Abstract

View Articletitled, Laser Digitizer/Stereo Vision Methods for Simultaneous Measurement/Analysis of Sheet Metal Forming Strain/Geometry

PDF

Topics: Geometry , Lasers , Sheet metal work , Coordinate measuring machines , Computers , Domes (Structural elements) , Aluminum , Overlays (Materials engineering) , Probes , Steel

A New Integrated Design and Fabrication Process for Profiled Edge Laminae (PEL) Tooling

Daniel F. Walczyk, Seungryeol Yoo

IMECE 2005; 247-258https://doi.org/10.1115/IMECE2005-79274

Abstract

View Articletitled, A New Integrated Design and Fabrication Process for Profiled Edge Laminae (PEL) Tooling

PDF

Topics: Design , Manufacturing , Tooling , Computer-aided design , Aircraft , Algorithms , Aluminum , Computer numerical control machine tools , Errors , Laser cutting

Experimental and Numerical Investigations of a Split-Ring Test for Springback

Z. Cedric Xia, Craig E. Miller, Feng Ren

IMECE 2005; 259-266https://doi.org/10.1115/IMECE2005-79384

Abstract

View Articletitled, Experimental and Numerical Investigations of a Split-Ring Test for Springback

PDF

Topics: Aluminum alloys , Anisotropy , Computer simulation , Cutting , Displacement , Hardening , Numerical analysis , Simulation results , Stress

Design of Hybrid-Driven Servo Press Mechanism

Pei-Lum Tso, Cheng-Ho Li, Jyun-Huang Ke

IMECE 2005; 267-271https://doi.org/10.1115/IMECE2005-79822

Abstract

View Articletitled, Design of Hybrid-Driven Servo Press Mechanism

PDF

Topics: Design , Servomechanism presses

Formability Evaluation of Galvannealed (GA), Hot-Dip Pure Zn Galvanized (GI), Electrogalvanized (EG) and Electrogalvanized Prephosphated (EGP) Interstitial Free Steelaluation

W. J. Miranda, J. R. G. Carneiro, P. P. Brito

IMECE 2005; 273-278https://doi.org/10.1115/IMECE2005-79927

Abstract

View Articletitled, Formability Evaluation of Galvannealed (GA), Hot-Dip Pure Zn Galvanized (GI), Electrogalvanized (EG) and Electrogalvanized Prephosphated (EGP) Interstitial Free Steelaluation

PDF

Topics: Coatings , Electrodeposition , Friction , Microscopy , Oils , Petroleum , Pressure , Steel , Steel sheet , Texture (Materials)

Trimming of Advanced High Strength Steels

Sergey F. Golovashchenko, Andrey M. Ilinich

IMECE 2005; 279-286https://doi.org/10.1115/IMECE2005-79983

Abstract

View Articletitled, Trimming of Advanced High Strength Steels

PDF

Topics: Aluminum alloys , Carbon steel , Clearances (Engineering) , Deburring , Design , Die cutting , Finishes , High strength steel , Manufacturing , Metals

Massive Parallel Laser Shock Peening: Simulation, Verification, and Analysis

A. W. Warren, Y. B. Guo, S. C. Chen

IMECE 2005; 287-295https://doi.org/10.1115/IMECE2005-80097

Abstract

View Articletitled, Massive Parallel Laser Shock Peening: Simulation, Verification, and Analysis

PDF

Topics: Finite element analysis , Laser hardening , Laser materials , Simulation

HYDROFORGING: A New Manufacturing Technology for Forged Lightweight Products of Aluminum

Matthias Roeper, Steffen Reinsch

IMECE 2005; 297-304https://doi.org/10.1115/IMECE2005-80424

Abstract

View Articletitled, HYDROFORGING: A New Manufacturing Technology for Forged Lightweight Products of Aluminum

PDF

Topics: Aluminum , Manufacturing technology , Forging , Materials properties , Weight (Mass) , Casting , Deformation , Stiffness , Strength (Materials)

Determination of Micro Channels Die Texturing for Enhancing Tribological Conditions in Tube Hydroforming

Gracious Ngaile, Angel Alvarado

IMECE 2005; 305-312https://doi.org/10.1115/IMECE2005-80868

Abstract

View Articletitled, Determination of Micro Channels Die Texturing for Enhancing Tribological Conditions in Tube Hydroforming

PDF

Topics: Microchannels , Tribology , Design , Computer simulation , Cross section (Physics) , Density , Geometry , Mechanical properties , Pressure , Stress

The Reduction of Deformation Energy and Increase in Workability of Metals Through an Applied Electric Current

Timothy A. Perkins, John T. Roth

IMECE 2005; 313-322https://doi.org/10.1115/IMECE2005-81060

Abstract

View Articletitled, The Reduction of Deformation Energy and Increase in Workability of Metals Through an Applied Electric Current

PDF

Topics: Deformation , Electric current , Metals , Workability

Incremental Forming for Aluminum Automotive Technology

Sergey F. Golovashchenko, Al Krause, Alan J. Gillard

IMECE 2005; 323-329https://doi.org/10.1115/IMECE2005-81069

Abstract

View Articletitled, Incremental Forming for Aluminum Automotive Technology

PDF

Topics: Alloys , Aluminum , Aluminum alloys , Deformation , Heat treating (Metalworking) , Manufacturing , Mechanical properties , Steel

Microforming: Study of Friction Conditions and the Impact of Low Friction/High-Strength Die Coatings on the Extrusion of Micropins

Neil Krishnan, Jian Cao, Kuniaki Dohda

IMECE 2005; 331-340https://doi.org/10.1115/IMECE2005-81490

Abstract

View Articletitled, Microforming: Study of Friction Conditions and the Impact of Low Friction/High-Strength Die Coatings on the Extrusion of Micropins

PDF

Topics: Coatings , Extruding , Friction , Dimensions , Manufacturing , Pins (Engineering) , Brass (Metal) , Carbon , Diamonds , Displacement

Investigation of Deformation Characteristics of Micropins Fabricated Using Microextrusion

Neil Krishnan, Jian Cao, Brad Kinsey, Sunal A. Parasiz, Ming Li

IMECE 2005; 341-348https://doi.org/10.1115/IMECE2005-81511

Abstract

View Articletitled, Investigation of Deformation Characteristics of Micropins Fabricated Using Microextrusion

PDF

Topics: Deformation , Grain size , Pins (Engineering) , Dimensions , Extruding , Manufacturing , Materials properties

Double Diaphragm Forming of a Discontinuous Advanced Composite Prepreg Material: Process Development and Material Modeling

Christopher Munro, Daniel Walczyk, George Dvorak

IMECE 2005; 349-357https://doi.org/10.1115/IMECE2005-82523

Abstract

View Articletitled, Double Diaphragm Forming of a Discontinuous Advanced Composite Prepreg Material: Process Development and Material Modeling

PDF

Topics: Composite materials , Diaphragms (Mechanical devices) , Diaphragms (Structural) , Modeling , Engineering simulation , Simulation , Aerospace industry , Aircraft , Carbon fibers , Displacement

Advances in Smart Machines/Smart Factory Technology

Systematic Investigation of Tool Wear Monitoring in Turning Operations

Nuo Xu, Samuel Huang, John Snyder

IMECE 2005; 359-367https://doi.org/10.1115/IMECE2005-79265

Abstract

View Articletitled, Systematic Investigation of Tool Wear Monitoring in Turning Operations

PDF

Topics: Turning , Wear , Signals , Finishes , Geometry , Acoustic emissions , Artificial neural networks , Cutting , Modeling , Sensors

An Improved Model of Machining Chip Breaking Limits for Smart Machining Process Design

A. Avanessian, Y. Rong, G. Tan

IMECE 2005; 369-385https://doi.org/10.1115/IMECE2005-79378

Abstract

View Articletitled, An Improved Model of Machining Chip Breaking Limits for Smart Machining Process Design

PDF

Topics: Machining , Process design , Finishes , Manufacturing

A Numerical Study of Uncertainty in Stability and Surface Location Error in High-Speed Milling

Mohammad H. Kurdi, Tony L. Schmitz, Raphael T. Haftka, Brian P. Mann

IMECE 2005; 387-395https://doi.org/10.1115/IMECE2005-80875

Abstract

View Articletitled, A Numerical Study of Uncertainty in Stability and Surface Location Error in High-Speed Milling

PDF

Topics: Errors , Milling , Stability , Uncertainty , Optimization , Cutting , Solid-liquid equilibrium , Eigenvalues , Finite element analysis , Manufacturing

Mechanistic Modeling of Process Damping in Peripheral Milling

C. Y. Huang, J.-J. Junz Wang

IMECE 2005; 397-406https://doi.org/10.1115/IMECE2005-80880

Abstract

View Articletitled, Mechanistic Modeling of Process Damping in Peripheral Milling

PDF

Topics: Damping , Die cutting , Milling , Modeling , Shearing (Deformation) , Vibration

Robust Optimization for Smart Machining Systems: An Enabler for Agile Manufacturing

L. Deshayes, L. Welsch, A. Donmez, R. Ivester

IMECE 2005; 407-416https://doi.org/10.1115/IMECE2005-81537

Abstract

View Articletitled, Robust Optimization for Smart Machining Systems: An Enabler for Agile Manufacturing

PDF

Topics: Machining , Manufacturing , Optimization , Engineering prototypes , Manufacturing systems

Minimum-Zone Circularity Evaluation Using Particle Swarm Optimization

Hemant Ramaswami, Yashpal Kovvur, Sam Anand

IMECE 2005; 417-424https://doi.org/10.1115/IMECE2005-81601

Abstract

View Articletitled, Minimum-Zone Circularity Evaluation Using Particle Swarm Optimization

PDF

Topics: Particle swarm optimization , Evolutionary algorithms , Algorithms , Coordinate measuring machines , Optimization , Particulate matter , Precision engineering , Testing , Trajectories (Physics)

Wireless Sensor Networks for Machinery Monitoring

V. Sundararajan, Andrew Redfern, Michael Schneider, Paul Wright, James Evans

IMECE 2005; 425-433https://doi.org/10.1115/IMECE2005-82224

Abstract

View Articletitled, Wireless Sensor Networks for Machinery Monitoring

PDF

Topics: Machinery , Wireless sensor networks , Sensors , Density , Failure , Flaw detection , Instrumentation , Intelligent buildings , Machine tools , Process control

Towards a Unified In-Process Geometrical Model for Multiple Machining and Layered Manufacturing

Peiling Liu, Cheng-Feng Zhu, Bin Song, Wen Feng Lu, YiQiang Lu, Xiaoming Ding

IMECE 2005; 435-444https://doi.org/10.1115/IMECE2005-82573

Abstract

View Articletitled, Towards a Unified In-Process Geometrical Model for Multiple Machining and Layered Manufacturing

PDF

Topics: Machining , Manufacturing , Modeling , Simulation

Advances in Thermal Aspects of Emerging Machining Technologies

Three-Dimensional Thermal Analysis for Laser Assisted Milling of Silicon Nitride Ceramics Using FEA

Xinwei Shen, W. J. Liu, Shuting Lei

IMECE 2005; 445-452https://doi.org/10.1115/IMECE2005-79245

Abstract

View Articletitled, Three-Dimensional Thermal Analysis for Laser Assisted Milling of Silicon Nitride Ceramics Using FEA

PDF

Topics: Finite element analysis , Heat transfer , Lasers , Machining , Milling , Silicon nitride ceramics , Thermal analysis , Thermal stresses

Developing Complete Prediction Capability for Thermal Damages in Finish Machining of a Hardened Steel

Jing Shi, C. Richard Liu

IMECE 2005; 453-460https://doi.org/10.1115/IMECE2005-79261

Abstract

View Articletitled, Developing Complete Prediction Capability for Thermal Damages in Finish Machining of a Hardened Steel

PDF

Topics: Damage , Finishes , Machining , Martensitic steel , Quenching (Metalworking) , Hardness (Materials) , Temperature , Turning , Finite element analysis , Heat treating (Metalworking)

Numerical Investigation of Heat Partition in the Primary Shear Zone in Metal Cutting

Vasant Pednekar, Vis Madhavan, Amir H. Adibi-Sedeh

IMECE 2005; 461-470https://doi.org/10.1115/IMECE2005-79776

Abstract

View Articletitled, Numerical Investigation of Heat Partition in the Primary Shear Zone in Metal Cutting

PDF

Topics: Heat , Metal cutting , Shear (Mechanics) , Cutting , Flow (Dynamics) , Convection , Deformation , Finite element analysis , Heat conduction , Machining

An Investigation on Cutting Tool Temperatures in Composite Machining Assisted With Heat-Pipe Cooling

Jie Liu, Y. Kevin Chou, Mark T. North, Kirk A. Bennett

IMECE 2005; 471-478https://doi.org/10.1115/IMECE2005-80323

Abstract

View Articletitled, An Investigation on Cutting Tool Temperatures in Composite Machining Assisted With Heat-Pipe Cooling

PDF

Topics: Composite materials , Cooling , Cutting tools , Heat pipes , Machining , Temperature , Heat , Coating processes , Coatings , Heat flux

Effect of Laser Preheating the Workpiece on Micro-End Milling of Metals

Yongho Jeon, Frank Pfefferkorn

IMECE 2005; 479-488https://doi.org/10.1115/IMECE2005-80480

Abstract

View Articletitled, Effect of Laser Preheating the Workpiece on Micro-End Milling of Metals

PDF

Topics: Lasers , Metals , Milling , Stress , Cutting , Stiffness , Aluminum , Steel , Temperature , Yield strength

An Analytical-Thermal Modeling Approach for Predicting Forces, Stresses and Temperatures in Machining With Worn Tools

Yigit Karpat, Tugrul O¨zel

IMECE 2005; 489-498https://doi.org/10.1115/IMECE2005-81035

Abstract

View Articletitled, An Analytical-Thermal Modeling Approach for Predicting Forces, Stresses and Temperatures in Machining With Worn Tools

PDF

Topics: Machining , Modeling , Stress , Temperature , Wear , Cutting , Heat , Aluminum , Constitutive equations , Die cutting

Transient Temperature Measurement in Nanosecond Pulsed Laser Micro Drilling by Using Micro Thin Film Thermocouples

Hongseok Choi, Xiaochun Li

IMECE 2005; 499-502https://doi.org/10.1115/IMECE2005-81157

Abstract

View Articletitled, Transient Temperature Measurement in Nanosecond Pulsed Laser Micro Drilling by Using Micro Thin Film Thermocouples

PDF

Topics: Drilling , Lasers , Temperature measurement , Thermocouples , Thin films , Transients (Dynamics)

Mechanical and Thermal Behavior for Machining Ti-6Al-4V With AlMgB14 and WC-Co Tools

L. Deshayes, J. L. Evans, R. Ivester, D. G. Bhat, S. A. Batzer, E. P. Whitenton

IMECE 2005; 503-512https://doi.org/10.1115/IMECE2005-81510

Abstract

View Articletitled, Mechanical and Thermal Behavior for Machining Ti-6Al-4V With AlMgB14 and WC-Co Tools

PDF

Topics: Machining , Cutting , Titanium , Aluminum , Contamination , Finite element analysis , Force measurement , Fracture toughness , Geometry , High temperature

Tribological and Thermal Effects of Cutting Fluid Application in Machining With Coated and Grooved Cutting Tools

Anshu D. Jayal, A. K. Balaji

IMECE 2005; 513-520https://doi.org/10.1115/IMECE2005-82963

Abstract

View Articletitled, Tribological and Thermal Effects of Cutting Fluid Application in Machining With Coated and Grooved Cutting Tools

PDF

Topics: Cutting , Cutting tools , Fluids , Machining , Temperature effects , Tribology , Coatings , Carbide cutting tools , Cooling , Floods

Assembly Systems — Design, Modeling and Analysis

Virtual Functional Build for Body Assembly

Richard J. Gerth

IMECE 2005; 521-530https://doi.org/10.1115/IMECE2005-79884

Abstract

View Articletitled, Virtual Functional Build for Body Assembly

PDF

Topics: Manufacturing , Engineering prototypes , Vehicles , Automotive industry , Collaboration , Computer software , Dimensions , Modeling , Tooling

Functional Interface-Based Assembly Modeling

James R. Stoddard, Marvin Law

IMECE 2005; 531-536https://doi.org/10.1115/IMECE2005-79945

Abstract

View Articletitled, Functional Interface-Based Assembly Modeling

PDF

Topics: Manufacturing , Modeling , Design , Computer-aided design , Kinematics , Product quality , Tolerance analysis

Non-Nominal Path Planning of Assembly Processes

Johan S. Carlson, Rikard So¨derberg, Robert Bohlin, Lars Lindkvist, Tomas Hermansson

IMECE 2005; 537-546https://doi.org/10.1115/IMECE2005-79947

Abstract

View Articletitled, Non-Nominal Path Planning of Assembly Processes

PDF

Topics: Manufacturing , Path planning , Algorithms , Automotive industry , Collisions (Physics) , Design , Geometry , Clearances (Engineering) , Simulation , Simulation results

Retrieving Assembly Part Design Using Case-Based Reasoning and Genetic Algorithms

Guanghsu A. Chang, Cheng-Chung Su, John W. Priest

IMECE 2005; 547-554https://doi.org/10.1115/IMECE2005-80334

Abstract

View Articletitled, Retrieving Assembly Part Design Using Case-Based Reasoning and Genetic Algorithms

PDF

Topics: Design , Genetic algorithms , Manufacturing

Determination of an Optimal Assembly Misalignment in Sugar Cane Mills

Nelson Arzola, Rafael Goytisolo, Ariel Fernandez

IMECE 2005; 555-559https://doi.org/10.1115/IMECE2005-80435

Abstract

View Articletitled, Determination of an Optimal Assembly Misalignment in Sugar Cane Mills

PDF

Topics: Durability , Failure , Fatigue , Fracture (Materials) , Fracture (Process) , Gears , Manufacturing , Stress

Virtual Locator Trimming in Pre-Production: Rigid and Non-Rigid Analysis

Lars Lindkvist, Johan S. Carlson, Rikard So¨derberg

IMECE 2005; 561-568https://doi.org/10.1115/IMECE2005-81266

Abstract

View Articletitled, Virtual Locator Trimming in Pre-Production: Rigid and Non-Rigid Analysis

PDF

Topics: Computers , Errors , Inspection , Manufacturing , Optimization

Design Options for a Reconfigurable Automotive Engine Assembly Pallet

Chi-Hung Shen, Clement M. Gosselin

IMECE 2005; 569-573https://doi.org/10.1115/IMECE2005-81447

Abstract

View Articletitled, Design Options for a Reconfigurable Automotive Engine Assembly Pallet

PDF

Topics: Automotive engines , Design , Manufacturing , Pallets

Design Methodology for Assembly and Disassembly Based on Rating Factors

Devdas Shetty, Vishwesh Coimbatore, Claudio Campana

IMECE 2005; 575-581https://doi.org/10.1115/IMECE2005-81450

Abstract

View Articletitled, Design Methodology for Assembly and Disassembly Based on Rating Factors

PDF

Topics: Design methodology , Manufacturing , Design , Maintenance , Cycles , Design for Manufacturing , Engineers , Manufacturing industry , Recycling , Regulations

Tolerance Analysis Considering Weld Distortion by Use of Pregenerated Database

Dongyul Lee, Ki Eak Kwon, Jaeyeol Lee, Haeseong Jee, Hyunjune Yim, Seong Wook Cho, Jong Gye Shin, Gyubong Lee

IMECE 2005; 583-590https://doi.org/10.1115/IMECE2005-81651

Abstract

View Articletitled, Tolerance Analysis Considering Weld Distortion by Use of Pregenerated Database

PDF

Topics: Databases , Tolerance analysis , Welding , Manufacturing , Temperature , Finite element analysis , Plates (structures)

Variation Simulation of Fixtured Assembly Processes for Compliant Structures Using Piecewise-Linear Analysis

Michael L. Stewart, Kenneth W. Chase

IMECE 2005; 591-600https://doi.org/10.1115/IMECE2005-82371

Abstract

View Articletitled, Variation Simulation of Fixtured Assembly Processes for Compliant Structures Using Piecewise-Linear Analysis

PDF

Topics: Manufacturing , Simulation , Deformation , Elastic analysis , Errors , Finite element model , Modeling , Stress

Product Information Exchange Using Open Assembly Model: Issues Related to Representation of Geometric Information

Mehmet Murat Baysal, Utpal Roy, Rachuri Sudarsan, Ram D. Sriram, Kevin W. Lyons

IMECE 2005; 601-612https://doi.org/10.1115/IMECE2005-82812

Abstract

View Articletitled, Product Information Exchange Using Open Assembly Model: Issues Related to Representation of Geometric Information

PDF

Topics: Manufacturing , Geometry , Collaboration , Computer software , Internet , Maintenance , Modeling , Product development

Collaborative Manufacturing for Product Quality

Implementing Inter-Enterprise Workflow Management Using Agent-Based Web Services

Shuying Wang, Weiming Shen, Qi Hao

IMECE 2005; 613-620https://doi.org/10.1115/IMECE2005-79242

Abstract

View Articletitled, Implementing Inter-Enterprise Workflow Management Using Agent-Based Web Services

PDF

Topics: Web services , Workflow

Design Synthesis and Evaluation in a Design Reuse System

Q. L. Xu, S. K. Ong, A. Y. C. Nee

IMECE 2005; 621-630https://doi.org/10.1115/IMECE2005-79463

Abstract

View Articletitled, Design Synthesis and Evaluation in a Design Reuse System

PDF

Topics: Design

Negotiation in Agent Based Manufacturing Scheduling Using Auction Models

Chun Wang, Weiming Shen, Hamada Ghenniwa

IMECE 2005; 631-640https://doi.org/10.1115/IMECE2005-80905

Abstract

View Articletitled, Negotiation in Agent Based Manufacturing Scheduling Using Auction Models

PDF

Topics: Manufacturing , Negotiation

A Web-Based Approach to Real-Time Machine Condition Monitoring and Control

Lihui Wang, Weiming Shen

IMECE 2005; 641-646https://doi.org/10.1115/IMECE2005-81304

Abstract

View Articletitled, A Web-Based Approach to Real-Time Machine Condition Monitoring and Control

PDF

Topics: Condition monitoring , Machinery , Manufacturing

Computer-Integrated Design and Manufacturing of Packaging Machines

Scott E. Buske, Tien-I Liu

IMECE 2005; 647-658https://doi.org/10.1115/IMECE2005-81874

Abstract

View Articletitled, Computer-Integrated Design and Manufacturing of Packaging Machines

PDF

Topics: Computers , Design , Machinery , Manufacturing , Packaging , Errors , Computer numerical control machine tools , Packing (Shipments) , Packings (Cushioning) , Sales

Control of Manufacturing Machines, Processes, and Systems

A Study of Gyroscopic Effects on Stability of High Speed Milling

Mohammad R. Movahhedy, Peiman Mosaddegh

IMECE 2005; 659-665https://doi.org/10.1115/IMECE2005-80521

Abstract

View Articletitled, A Study of Gyroscopic Effects on Stability of High Speed Milling

PDF

Topics: Milling , Stability , Cutting tools , Dynamic response , Dynamic stability , Dynamics (Mechanics) , Finite element analysis , Frequency response , High speed machining , Machine tools

Determination of Cutting Conditions for the Stable Milling of Flexible Parts by Means of a Three-Dimensional Dynamic Model

F. J. Campa, L. N. Lo´pez de Lacalle, U. Bravo, S. Herranz, E. Ukar

IMECE 2005; 667-674https://doi.org/10.1115/IMECE2005-80774

Abstract

View Articletitled, Determination of Cutting Conditions for the Stable Milling of Flexible Parts by Means of a Three-Dimensional Dynamic Model

PDF

Topics: Chatter , Cutting , Dynamic models , Milling , Stability , Thin wall structures

Optimization of CNC Cutting Parameters by the Electrical Power Method: Turning Case

E. Gutierrez Romo, J. Caldero´n

IMECE 2005; 675-681https://doi.org/10.1115/IMECE2005-80990

Abstract

View Articletitled, Optimization of CNC Cutting Parameters by the Electrical Power Method: Turning Case

PDF

Topics: Computer numerical control machine tools , Cutting , Electricity (Physics) , Optimization , Turning , Dynamometers , Machining , Manufacturing , Assembly lines , Geometry

Towards the Development of a Methodology for the Optimization of the Metal Cutting Process in Multiedge Tools From Data Collected With Single Edge Tools

V. A. Acosta, J. C. Miranda

IMECE 2005; 683-689https://doi.org/10.1115/IMECE2005-81260

Abstract

View Articletitled, Towards the Development of a Methodology for the Optimization of the Metal Cutting Process in Multiedge Tools From Data Collected With Single Edge Tools

PDF

Topics: Metal cutting , Optimization , Milling , Tooling , Cutting , Engineers , Manufacturing

Design and Implementation of a PKM Based 5-Axis Reconfigurable Machine

Peter E. Orban, Zhuming M. Bi, Y. T. Lang, Marcel Verner

IMECE 2005; 691-697https://doi.org/10.1115/IMECE2005-81277

Abstract

View Articletitled, Design and Implementation of a PKM Based 5-Axis Reconfigurable Machine

PDF

Topics: Calibration , Design , Kinematics , Machinery

Uncertainity Analysis for the Fiducial Calibration System

Bethany A. Woody, K. Scott Smith, Robert J. Hocken, Jimmie A. Miller

IMECE 2005; 699-706https://doi.org/10.1115/IMECE2005-81299

Abstract

View Articletitled, Uncertainity Analysis for the Fiducial Calibration System

PDF

Topics: Calibration , Machinery , Coordinate measuring machines , Uncertainty analysis

Strength Enhancement of Styrene Acrylonitrile Co-Polymer via Delay Pack Injection Molding

David C. Angstadt, John P. Coulter, Ryan Hydro

IMECE 2005; 707-715https://doi.org/10.1115/IMECE2005-81615

Abstract

View Articletitled, Strength Enhancement of Styrene Acrylonitrile Co-Polymer via Delay Pack Injection Molding

PDF

Topics: Delays , Injection molding , Polymers , Styrene acrylonitrile , Vibration , Fracture (Materials) , Packing (Shipments) , Packings (Cushioning) , Double refraction , Tensile strength

Parameter Effect and Sensitivity Analyses of Fixturing Dynamic Stability in Machining

Haiyan Deng, Shreyes N. Melkote

IMECE 2005; 717-726https://doi.org/10.1115/IMECE2005-81996

Abstract

View Articletitled, Parameter Effect and Sensitivity Analyses of Fixturing Dynamic Stability in Machining

PDF

Topics: Dynamic stability , Fixturing , Machining , Sensitivity analysis , Stability , Friction

Evaluation of Friction Stir Welds

S. Adapa, T. P. Chu, J. A. Schneider

IMECE 2005; 727-733https://doi.org/10.1115/IMECE2005-82126

Abstract

View Articletitled, Evaluation of Friction Stir Welds

PDF

Topics: Friction , Welded joints , Stress , Mechanical properties , Alloys , Materials properties , Surface finishing

An Efficient Volumetric-Error Measurement Method for Five-Axis Machine Tools

Shih-Ming Wang, Han-Jen Yu, Hung-Wei Liao

IMECE 2005; 735-742https://doi.org/10.1115/IMECE2005-83000

Abstract

View Articletitled, An Efficient Volumetric-Error Measurement Method for Five-Axis Machine Tools

PDF

Topics: Degrees of freedom , Errors , Machine tools

Diagnostics, Monitoring and Prediction for Life Cycle Control of Dynamic Systems (Symposium Jointly Sponsored by Life Cycle and Quality and Reliability Technical Committees)

Chatter Stability Mapping for Simultaneous Machining

Nejat Olgac, Rifat Sipahi

IMECE 2005; 743-750https://doi.org/10.1115/IMECE2005-79116

Abstract

View Articletitled, Chatter Stability Mapping for Simultaneous Machining

PDF

Topics: Chatter , Machining , Stability

Zero Phase Wavelet Transform for Detecting Bearing Localized Defects

C. James Li

IMECE 2005; 751-758https://doi.org/10.1115/IMECE2005-79532

Abstract

View Articletitled, Zero Phase Wavelet Transform for Detecting Bearing Localized Defects

PDF

Topics: Bearings , Wavelet transforms

High Pressure Air Compressor Condition Monitoring Using Unsupervised Pattern Classification Based on Projection Networks

C. James Li, C. Jansuwan

IMECE 2005; 759-765https://doi.org/10.1115/IMECE2005-79604

Abstract

View Articletitled, High Pressure Air Compressor Condition Monitoring Using Unsupervised Pattern Classification Based on Projection Networks

PDF

Topics: Air compressors , Condition monitoring , High pressure (Physics) , Algorithms , Compressors , Valves , Corrosion , Cylinders , Machinery , Maintenance

Expert System Modeling, Analysis and Validation of Surface Roughness in Drilling

P. S. Sivarao, Mohd Razail Muhamad

IMECE 2005; 767-773https://doi.org/10.1115/IMECE2005-79646

Abstract

View Articletitled, Expert System Modeling, Analysis and Validation of Surface Roughness in Drilling

PDF

Topics: Drilling , Expert systems , Modeling analysis , Surface roughness

Prediction of the Sugar Mill Shaft Failure Using a Fracture Mechanics Method

Nelson Arzola, Rafael Goytisolo, Ramon Perez, Ariel Fernandez

IMECE 2005; 775-781https://doi.org/10.1115/IMECE2005-80430

Abstract

View Articletitled, Prediction of the Sugar Mill Shaft Failure Using a Fracture Mechanics Method

PDF

Topics: Failure , Fracture (Materials) , Fracture mechanics , Stress , Bearings , Fatigue , Inspection

Tool Wear Monitoring in Turning Operation Using Vibration and Strain Measurement With Neural Network

Nabeel Kadim Abid Al-Sahib, Aimen Mohammed Bachaa

IMECE 2005; 783-792https://doi.org/10.1115/IMECE2005-80699

Abstract

View Articletitled, Tool Wear Monitoring in Turning Operation Using Vibration and Strain Measurement With Neural Network

PDF

Topics: Artificial neural networks , Strain measurement , Turning , Vibration , Wear , Manufacturing , Monitoring systems , Accelerometers , Acoustic emissions , Carbide cutting tools

Machine Learning and Model Based Reasoning for Prognostics of Complex Systems

Kenneth Marko

IMECE 2005; 793-800https://doi.org/10.1115/IMECE2005-81625

Abstract

View Articletitled, Machine Learning and Model Based Reasoning for Prognostics of Complex Systems

PDF

Topics: Complex systems , Machine learning , Vehicles , Artificial neural networks , Errors , Failure , Maintenance , Algorithms , Computers , Dynamics (Mechanics)

Predictive-Inspection Based Process Control in End Milling Operations

Aftab Khan, Dawn Tilbury, James Moyne

IMECE 2005; 801-810https://doi.org/10.1115/IMECE2005-82018

Abstract

View Articletitled, Predictive-Inspection Based Process Control in End Milling Operations

PDF

Topics: Inspection , Milling , Process control , Product quality , Manufacturing , Control systems , Feedback , Machinery , Manufacturing industry , Simulation

Surface Roughness Modeling Based on Surface Roughness Feature Concept for High Speed Machining

M. de J. Rami´rez, M. Correa, C. Rodri´guez, J. R. Alique

IMECE 2005; 811-817https://doi.org/10.1115/IMECE2005-82256

Abstract

View Articletitled, Surface Roughness Modeling Based on Surface Roughness Feature Concept for High Speed Machining

PDF

Topics: High speed machining , Modeling , Surface roughness , Information models , Design

Model Based Spur Gear Failure Prediction Using Gear Diagnosis

Sukhwan Choi, C. James Li

IMECE 2005; 819-823https://doi.org/10.1115/IMECE2005-82482

Abstract

View Articletitled, Model Based Spur Gear Failure Prediction Using Gear Diagnosis

PDF

Topics: Failure , Gears , Spur gears , Fracture (Materials) , Algorithms , Artificial neural networks , Errors , Finite element methods , Finite element model , Fracture mechanics

Particle Dampers for Workpiece Chatter Mitigation

Neil D. Sims, Ashan Amarasinghe, Keith Ridgway

IMECE 2005; 825-832https://doi.org/10.1115/IMECE2005-82687

Abstract

View Articletitled, Particle Dampers for Workpiece Chatter Mitigation

PDF

Topics: Chatter , Dampers , Particulate matter , Damping , Containers , Machining , Milling , Cutting , Design , Friction

Experimental Investigation and Mechanistic Modeling of the Effects of Tool Edge Hone Effects in Turning Operations

Santosh Ranganath, Albert B. Campbell, Jihong Hwang

IMECE 2005; 833-842https://doi.org/10.1115/IMECE2005-82893

Abstract

View Articletitled, Experimental Investigation and Mechanistic Modeling of the Effects of Tool Edge Hone Effects in Turning Operations

PDF

Topics: Calibration , Cast iron , Cutting , Errors , Machining , Modeling , Temperature , Thrust , Turning

General

The Influence of Gear Hobbing on Worm Gear Characteristics

V. Simon

IMECE 2005; 843-852https://doi.org/10.1115/IMECE2005-79517

Abstract

View Articletitled, The Influence of Gear Hobbing on Worm Gear Characteristics

PDF

Topics: Gears , Worm gears , Gear teeth , Machine tools , Computer software , Cutting , Errors , Design , Generators , Geometry

Singulation of Electronic Packages With Abrasive Waterjets

Mohamed Hashish

IMECE 2005; 853-861https://doi.org/10.1115/IMECE2005-79659

Abstract

View Articletitled, Singulation of Electronic Packages With Abrasive Waterjets

PDF

Topics: Accuracy and precision , Clocks , Cutting , Delamination , Drilling , Electronic packages , Geometry , Machinery , Reliability , Storage

Recent Advances in Micro/Meso-Scale Manufacturing Processes

Robert E. Williams, Yong Huang, Shreyes Melkote, Brad Kinsey, Wei Sun, Donggang Yao

IMECE 2005; 863-884https://doi.org/10.1115/IMECE2005-79889

Abstract

View Articletitled, Recent Advances in Micro/Meso-Scale Manufacturing Processes

PDF

Topics: Biomanufacturing , Electrical discharge machining , Lasers , Manufacturing , Polymers , Machining , Cutting , Laser hardening , Machinery , Microfabrication

Rotary Ultrasonic Machining of Titanium Alloy: A Feasibility Study

N. J. Churi, Z. C. Li, Z. J. Pei, C. Treadwell

IMECE 2005; 885-892https://doi.org/10.1115/IMECE2005-80254

Abstract

View Articletitled, Rotary Ultrasonic Machining of Titanium Alloy: A Feasibility Study

PDF

Topics: Cutting , Grinding , Surface roughness , Titanium alloys , Ultrasonic machining , Wear

Chemical Mechanical Polishing of Silicon Wafers: Finite Element Analysis of Wafer Flatness

X. H. Zhang, Z. J. Pei, Graham R. Fisher

IMECE 2005; 893-900https://doi.org/10.1115/IMECE2005-80271

Abstract

View Articletitled, Chemical Mechanical Polishing of Silicon Wafers: Finite Element Analysis of Wafer Flatness

PDF

Topics: Finite element analysis , Polishing , Pressure , Semiconductor wafers

Tool-Wear Monitoring and Control

J. Srinivas, Rao Dukkipati, V. Sreebalaji, K. Ramakotaih

IMECE 2005; 901-904https://doi.org/10.1115/IMECE2005-80799

Abstract

View Articletitled, Tool-Wear Monitoring and Control

PDF

Topics: Control equipment , Cutting , Wear

Modeling and Simulation of Residual Stresses in Mechanical Autofrettage

M. Afzaal Malik, Badar Rashid, Muddasar Khan, Shahab Khushnood

IMECE 2005; 905-913https://doi.org/10.1115/IMECE2005-80813

Abstract

View Articletitled, Modeling and Simulation of Residual Stresses in Mechanical Autofrettage

PDF

Topics: Autofrettage , Modeling , Residual stresses , Simulation , Computers , Pressure , Pressure vessels , Cylinders , Deformation , Failure

Numerical Modeling of Thermoplastic Films in a Laser Welding Process

Richard A. Whalen, Gregory J. Kowalski

IMECE 2005; 915-923https://doi.org/10.1115/IMECE2005-81097

Abstract

View Articletitled, Numerical Modeling of Thermoplastic Films in a Laser Welding Process

PDF

Topics: Computer simulation , Laser welding , Welding , Transparent solids , Cooling , Damage , Heat , Lasers , Temperature profiles , Transparency

Florida’s First Coast Manufacturing Innovation Partnership Between Industry and Academia

D. Cox, A. Schonning

IMECE 2005; 925-931https://doi.org/10.1115/IMECE2005-81736

Abstract

View Articletitled, Florida’s First Coast Manufacturing Innovation Partnership Between Industry and Academia

PDF

Topics: Innovation , Manufacturing , Shorelines , Design , Manufacturing engineering , Modeling , Robotics , Sustainability , Collaboration , Computer-aided engineering

Predictive Surface Generation and Characterization for Cylindrical Turning Processes

Yashpal Kovvur, Hemant Ramaswami, Sam Anand

IMECE 2005; 933-942https://doi.org/10.1115/IMECE2005-81746

Abstract

View Articletitled, Predictive Surface Generation and Characterization for Cylindrical Turning Processes

PDF

Topics: Bridges (Structures) , Computer simulation , Cutting , Cutting tools , Design , Engineers , Errors , Geometry , Machinery , Machining

A Case-Based Reasoning Approach to Robot Selection

Guanghsu A. Chang, J. Paul Sims

IMECE 2005; 943-951https://doi.org/10.1115/IMECE2005-82066

Abstract

View Articletitled, A Case-Based Reasoning Approach to Robot Selection

PDF

Topics: Design , Robotics , Robots

Mechanical Micromachining Science and Technology

Micro EDM Deposition by Using Brass Wire Electrode in Air

Guohui Cao, Guanxin Chi, Baidong Jin, Zhenlong Wang, Wansheng Zhao

IMECE 2005; 953-956https://doi.org/10.1115/IMECE2005-80162

Abstract

View Articletitled, Micro EDM Deposition by Using Brass Wire Electrode in Air

PDF

Topics: Brass (Metal) , Electrical discharge machining , Electrodes , Wire

Experimental Characterization of Laser-Assisted Mechanical Micromachining (LAMM) Process

Ramesh Singh, Shreyes N. Melkote

IMECE 2005; 957-964https://doi.org/10.1115/IMECE2005-81350

Abstract

View Articletitled, Experimental Characterization of Laser-Assisted Mechanical Micromachining (LAMM) Process

PDF

Topics: Experimental characterization , Lasers , Micromachining

Manufacture of Microcantilever Sensors

Andrew W. McFarland, Jonathan S. Colton, Daniel Cox, Steven Y. Liang

IMECE 2005; 965-969https://doi.org/10.1115/IMECE2005-81379

Abstract

View Articletitled, Manufacture of Microcantilever Sensors

PDF

Topics: Injection molding , Microcantilevers , Micromachining , Sensors , Machine tools , Machinery , Microscopy , Arches , Biomedical microelectromechanical systems , Biosensors

Nano and Micro Materials and Manufacturing Processes: Nanomanufacturing

Effect of DC Bias on Microwave Plasma Enhanced Chemical Vapor Deposition Synthesis of Single-Walled Carbon Nanotubes

Matthew R. Maschmann, Placidus B. Amama, Timothy S. Fisher

IMECE 2005; 971-974https://doi.org/10.1115/IMECE2005-79007

Abstract

View Articletitled, Effect of DC Bias on Microwave Plasma Enhanced Chemical Vapor Deposition Synthesis of Single-Walled Carbon Nanotubes

PDF

Topics: Microwaves , Plasma-enhanced chemical vapor deposition , Single-walled carbon nanotubes , Carbon nanotubes , Chirality , Electron microscopy , Manufacturing , Nanoscale phenomena , Nanotubes , Raman spectroscopy

Study on Ultrasonic Cavitation Based Solidification Processing and Nanoparticle Feeding for High Volume Fabrication of Aluminum Matrix Nanocomposites

Yong Yang, Xiaochun Li

IMECE 2005; 975-979https://doi.org/10.1115/IMECE2005-81166

Abstract

View Articletitled, Study on Ultrasonic Cavitation Based Solidification Processing and Nanoparticle Feeding for High Volume Fabrication of Aluminum Matrix Nanocomposites

PDF

Topics: Aluminum , Cavitation , Manufacturing , Nanocomposites , Nanoparticles , Solidification , Particulate matter , Aluminum alloys , Ceramics , Metals

Nanostructured Materials by Machining

Srinivasan Swaminathan, M. Ravi Shankar, Balkrishna C. Rao, Travis L. Brown, Srinivasan Chandrasekar, W. Dale Compton, Alexander H. King, Kevin P. Trumble

IMECE 2005; 981-985https://doi.org/10.1115/IMECE2005-81242

Abstract

View Articletitled, Nanostructured Materials by Machining

PDF

Topics: Machining , Nanomaterials , Alloys , Deformation , Metals , Advanced materials , Aerospace industry , Aluminum alloys , Biomedicine , Bulk solids

Development of Carbon-Nanotube-Based Nanocomposite Strain Sensor

Giang T. Pham, Young-Bin Park, Ben Wang

IMECE 2005; 987-993https://doi.org/10.1115/IMECE2005-82309

Abstract

View Articletitled, Development of Carbon-Nanotube-Based Nanocomposite Strain Sensor

PDF

Topics: Carbon , Nanocomposites , Nanotubes , Strain sensors

Surface Plasmon Assisted Laser Nanolithography Using Metalic Mask

Dongbing Shao, Shanchen Chen

IMECE 2005; 995-999https://doi.org/10.1115/IMECE2005-82741

Abstract

View Articletitled, Surface Plasmon Assisted Laser Nanolithography Using Metalic Mask

PDF

Topics: Lasers , Nanolithography , Plasmons (Physics) , Wavelength , Density , Diffraction , Photolithography , Coating processes , Coatings , Computer simulation

New Materials, Processes, and Technology for Automotive Body Manufacturing: Challenges and Solutions

Friction Stir Riveting: Impact of Process Parameters on Joint Performance

Robin Stevenson, P.-C. Wang

IMECE 2005; 1001-1009https://doi.org/10.1115/IMECE2005-79281

Abstract

View Articletitled, Friction Stir Riveting: Impact of Process Parameters on Joint Performance

PDF

Topics: Friction , Riveting , Rivets , Welding , Heating , Joining , Welded joints

Flexural Response of Laminated Steel

Xinran (Sharon) Xiao, Ching-Kuo Hsiung, Zhong Zhao

IMECE 2005; 1011-1019https://doi.org/10.1115/IMECE2005-79287

Abstract

View Articletitled, Flexural Response of Laminated Steel

PDF

Topics: Euler-Bernoulli beam theory , Finite element analysis , Modeling , Shear (Mechanics) , Steel

Design of a Bistable Compliant Locking Mechanism for New Generation Mirror Actuators

Phaniendra Somraj, Hung-Yao Hsu

IMECE 2005; 1021-1029https://doi.org/10.1115/IMECE2005-79480

Abstract

View Articletitled, Design of a Bistable Compliant Locking Mechanism for New Generation Mirror Actuators

PDF

Topics: Actuators , Design , Mirrors , Automobiles , Compliant mechanisms , Manufacturing , Rigid-body mechanisms , Testing

Distributed Adaptive Optimization in Virtual Body Assembly

Richard J. Gerth, Sven Brueckner

IMECE 2005; 1031-1040https://doi.org/10.1115/IMECE2005-79885

Abstract

View Articletitled, Distributed Adaptive Optimization in Virtual Body Assembly

PDF

Topics: Doors , Manufacturing , Multi-agent systems , Optimization , Simulation , Vehicles , Virtual assembly

Experimental Analysis of Laminated Fibrous Micro-Composite E-Springs for Vehicle Suspension Systems

Salah A. Elmoselhy, Badr S. Azzam, Sayed M. Metwalli

IMECE 2005; 1041-1048https://doi.org/10.1115/IMECE2005-80780

Abstract

View Articletitled, Experimental Analysis of Laminated Fibrous Micro-Composite E-Springs for Vehicle Suspension Systems

PDF

Topics: Composite materials , Experimental analysis , Springs , Suspension systems

Experimental Characterization of MFDC/CHC Resistance Spot Welding

Wei Li, Daniel Cerjanec, Gerald A. Grzadzinski

IMECE 2005; 1049-1055https://doi.org/10.1115/IMECE2005-81293

Abstract

View Articletitled, Experimental Characterization of MFDC/CHC Resistance Spot Welding

PDF

Topics: Experimental characterization , Welding , Automotive industry , Energy levels (Quantum mechanics) , Heat , Joining , Sheet metal , Signals

Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6061-T6 Sheets

Dung-An Wang, Sheng-Chiang Lee, Kang-Yuan Hsieh

IMECE 2005; 1057-1061https://doi.org/10.1115/IMECE2005-82397

Abstract

View Articletitled, Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6061-T6 Sheets

PDF

Topics: Aluminum , Failure mechanisms , Friction , Shear (Mechanics) , Welded joints , Failure , Cross section (Physics) , Fracture (Materials) , Fracture (Process)

Process Development and Modeling in Micro/Meso-Scale Manufacturing

Study of Micro Ultrasonic Machining of Silicon

Z. Yu, X. Hu, K. P. Rajurkar

IMECE 2005; 1063-1070https://doi.org/10.1115/IMECE2005-79244

Abstract

View Articletitled, Study of Micro Ultrasonic Machining of Silicon

PDF

Topics: Silicon , Ultrasonic machining , Machining , Stress , Brittleness , Cavities , Ceramics , Glass , Microscale devices , Particulate matter

Characterizing the Effect of 319 Aluminum Microstructure on Machinability: Part 1 — Model Development

Xuefei Hu, John W. Sutherland, James M. Boileau

IMECE 2005; 1071-1080https://doi.org/10.1115/IMECE2005-79653

Abstract

View Articletitled, Characterizing the Effect of 319 Aluminum Microstructure on Machinability: Part 1 — Model Development

PDF

Topics: Aluminum , Machinability , Model development , Machining , Constitutive equations , Parameter estimation , Solidification

Characterizing the Effect of 319 Aluminum Microstructure on Machinability: Part 2 — Model Validation

Xuefei Hu, John W. Sutherland, James M. Boileau

IMECE 2005; 1081-1090https://doi.org/10.1115/IMECE2005-79654

Abstract

View Articletitled, Characterizing the Effect of 319 Aluminum Microstructure on Machinability: Part 2 — Model Validation

PDF

Topics: Aluminum , Machinability , Model validation , Cutting , Machining , Continuum mechanics , Disks , Flow (Dynamics) , Stress

Adiabatic Shear Modeling and Its Influence on Machining Simulations: BCJ vs. JC Model

Q. Wen, Y. B. Guo, K. A. Woodbury

IMECE 2005; 1091-1099https://doi.org/10.1115/IMECE2005-80107

Abstract

View Articletitled, Adiabatic Shear Modeling and Its Influence on Machining Simulations: BCJ vs. JC Model

PDF

Topics: Constitutive equations , Machining , Mechanical behavior , Modeling , Shear (Mechanics) , Simulation

Research of the Relationship Between the Clearance and Wear of Precise Micro Punch and Die

Jui-Chang Lin, Kingsun Lee, Ming-Fang Lu, Chainming Yen

IMECE 2005; 1101-1107https://doi.org/10.1115/IMECE2005-80321

Abstract

View Articletitled, Research of the Relationship Between the Clearance and Wear of Precise Micro Punch and Die

PDF

Topics: Clearances (Engineering) , Wear , Composite materials , Metals , Packaging , Artificial neural networks , Casting , Design , Forging , Integrated circuits

Analytical and Numerical Investigation of the Strain Rate Field in the Secondary Shear Zone

N. Tounsi

IMECE 2005; 1109-1116https://doi.org/10.1115/IMECE2005-81080

Abstract

View Articletitled, Analytical and Numerical Investigation of the Strain Rate Field in the Secondary Shear Zone

PDF

Topics: Modeling , Shear (Mechanics)

Micro Thin Film Sensor Embedded in Metal Structures for In-Situ Process Monitoring During Ultrasonic Welding

Xudong Cheng, Xiaochun Li

IMECE 2005; 1117-1121https://doi.org/10.1115/IMECE2005-81091

Abstract

View Articletitled, Micro Thin Film Sensor Embedded in Metal Structures for In-Situ Process Monitoring During Ultrasonic Welding

PDF

Topics: Metalwork , Process monitoring , Thin film sensors , Ultrasonic welding , Welding , Heat , Sensors , Metals , Adhesion , Temperature

Metallic Glass Surface Patterning by Micro-Molding

Jeffrey Bardt, Nathan Mauntler, Gerald Bourne, Tony L. Schmitz, John C. Ziegert, W. Gregory Sawyer

IMECE 2005; 1123-1129https://doi.org/10.1115/IMECE2005-81099

Abstract

View Articletitled, Metallic Glass Surface Patterning by Micro-Molding

PDF

Topics: Metallic glasses , Molding , Crystallization , Geometry , Glass transition , Metals , Reactive-ion etching , Semiconductor wafers , Temperature

Numerical and Experimental Study on Micro-Electrical Discharge Micromachining Characteristics on Molybdenum

Phil Allen, Xiaolin Chen, Dave Kim

IMECE 2005; 1131-1137https://doi.org/10.1115/IMECE2005-81125

Abstract

View Articletitled, Numerical and Experimental Study on Micro-Electrical Discharge Micromachining Characteristics on Molybdenum

PDF

Topics: Micromachining , Molybdenum , Electrical discharge machining , Gas discharge (Electric discharge) , Evaluation methods , Machining , Melting , Scanning electron microscopy , Shapes , Temperature

An Approach for Micro End Mill Frequency Response Predictions

Chi-Hung Cheng, Tony L. Schmitz, Nagaraj Arakere, G. Scott Duncan

IMECE 2005; 1139-1145https://doi.org/10.1115/IMECE2005-81215

Abstract

View Articletitled, An Approach for Micro End Mill Frequency Response Predictions

PDF

Topics: Frequency response , Dynamics (Mechanics) , Impact testing , Manufacturing

Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting

Kai Liu, Sathyan Subbiah, Shreyes N. Melkote

IMECE 2005; 1147-1156https://doi.org/10.1115/IMECE2005-81477

Abstract

View Articletitled, Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting

PDF

Topics: Cutting , Finite element analysis , Size effect , Strain gradient

An Experimental Investigation of a Micro Injection Molded Mechanical Device

Alan M. Tom, Aleksandar K. Angelov, John P. Coulter

IMECE 2005; 1157-1165https://doi.org/10.1115/IMECE2005-81968

Abstract

View Articletitled, An Experimental Investigation of a Micro Injection Molded Mechanical Device

PDF

Topics: Injection molding , Mechanical properties , Microgears , Molding , Packing (Shipments) , Packings (Cushioning) , Stiffness , Temperature

Machinability Research and Workpiece Microstructure Characterization in Turning of Ultrafine Grained Copper

Mason Morehead, Yong Huang

IMECE 2005; 1167-1176https://doi.org/10.1115/IMECE2005-82638

Abstract

View Articletitled, Machinability Research and Workpiece Microstructure Characterization in Turning of Ultrafine Grained Copper

PDF

Topics: Copper , Machinability , Turning , Nanomaterials , Machining , Biomedicine , Bulk solids , Cutting , Deformation , Ductility

Modeling of Distribution Media and Vacuum Bag Properties on Permeability Variations During Vacuum Assisted Resin Transfer Molding (VARTM)

Yuhong Zhang, Sergey Lopatnikov, Dirk Heider

IMECE 2005; 1177-1184https://doi.org/10.1115/IMECE2005-82732

Abstract

View Articletitled, Modeling of Distribution Media and Vacuum Bag Properties on Permeability Variations During Vacuum Assisted Resin Transfer Molding (VARTM)

PDF

Topics: Modeling , Permeability , Resins , Transfer molding , Vacuum , Deformation , Design , Flow simulation , Geometry , Porosity

Description and Investigation of Size Effects in the Scaling of a Hot Forging Process and a Milling Tool Into the Microscale

J. P. Wulfsberg, G. Brudek, J. Lehmann, M. Terzi

IMECE 2005; 1185-1191https://doi.org/10.1115/IMECE2005-82739

Abstract

View Articletitled, Description and Investigation of Size Effects in the Scaling of a Hot Forging Process and a Milling Tool Into the Microscale

PDF

Topics: Forging , Microscale devices , Milling , Lasers , Diamonds , Dimensions , Chemical vapor deposition , Manufacturing , Sapphire , Anisotropy

Process Model Based Control of Dimensional Errors in Multistage Manufacturing Systems

Eliminating Redundant Operations While Improving Part Quality by Modeling Machining Errors

John Agapiou, Eric Steinhilper, Pulak Bandyopadhyay, Jeffrey Q. Xie

IMECE 2005; 1193-1200https://doi.org/10.1115/IMECE2005-79352

Abstract

View Articletitled, Eliminating Redundant Operations While Improving Part Quality by Modeling Machining Errors

PDF

Topics: Errors , Machining , Modeling

Multiple Fault Diagnosis Method in Multi-Station Assembly Processes Using State Space Model and Orthogonal Diagonalization Analysis

Zhenyu Kong, Ramesh Kumar, Suren Gogineni, Yingqing Zhou, Jijun Lin, Wenzhen Huang, Dariusz Ceglarek

IMECE 2005; 1201-1212https://doi.org/10.1115/IMECE2005-80340

Abstract

View Articletitled, Multiple Fault Diagnosis Method in Multi-Station Assembly Processes Using State Space Model and Orthogonal Diagonalization Analysis

PDF

Topics: Fault diagnosis , Manufacturing , Engineering models , Errors , Principal component analysis , Product quality , Statistical analysis

Automatic Process Adjustment for Reducing Dimensional Variation in Discrete Part Machining Processes

Hui Wang, Qiang Huang

IMECE 2005; 1213-1221https://doi.org/10.1115/IMECE2005-80406

Abstract

View Articletitled, Automatic Process Adjustment for Reducing Dimensional Variation in Discrete Part Machining Processes

PDF

Topics: Machining , Errors , Control equipment , Algorithms , Statistical process control , Control algorithms , Error compensation , Feedback , Kinematics , Machine tools

Stream of Variation Based Error Compensation Strategy in Multi-Stage Manufacturing Processes

Dragan Djurdjanovic, Jie Zhu

IMECE 2005; 1223-1230https://doi.org/10.1115/IMECE2005-81550

Abstract

View Articletitled, Stream of Variation Based Error Compensation Strategy in Multi-Stage Manufacturing Processes

PDF

Topics: Error compensation , Manufacturing , Errors , Control theory , Flow (Dynamics) , Machining , Cylinders , Manufacturing systems , Process design , Quality control

Surface Integrity and Product Performance of Meso/Micro/Nano-Scale Machining Hard/Brittle Materials

Study on Dimension Effect of Punch on Nanoimprint Process for Cu-Ni Alloy

Quang-Cherng Hsu, Cheng-Da Wu, Te-Hua Fang

IMECE 2005; 1231-1236https://doi.org/10.1115/IMECE2005-79027

Abstract

View Articletitled, Study on Dimension Effect of Punch on Nanoimprint Process for Cu-Ni Alloy

PDF

Topics: Alloys , Dimensions , Atoms , Copper , Corners (Structural elements) , Displacement , Geometry , Molding , Molecular dynamics methods , Size effect

Surface Roughness Prediction Model for Ceramic Grinding

Sanjay Agarwal, P. Venkateswara Rao

IMECE 2005; 1237-1245https://doi.org/10.1115/IMECE2005-79180

Abstract

View Articletitled, Surface Roughness Prediction Model for Ceramic Grinding

PDF

Topics: Ceramics , Grinding , Surface roughness

Experimental Investigation of the Machinabilty of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes

Johnson Samuel, Richard E. DeVor, Shiv G. Kapoor, K. Jimmy Hsia

IMECE 2005; 1247-1256https://doi.org/10.1115/IMECE2005-79756

Abstract

View Articletitled, Experimental Investigation of the Machinabilty of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes

PDF

Topics: Multi-walled carbon nanotubes , Nanocomposites , Carbon fibers , Composite materials , Cutting , Machinability , Polymers , Die cutting , Electrons , Milling

A Finite Element Analysis Based Compliance Method Coupled With Wet Etching to Determine Residual Stress in High Speed Milling

S. C. Ammula, Y. B. Guo, M. E. Barkey

IMECE 2005; 1257-1265https://doi.org/10.1115/IMECE2005-80102

Abstract

View Articletitled, A Finite Element Analysis Based Compliance Method Coupled With Wet Etching to Determine Residual Stress in High Speed Milling

PDF

Topics: Aluminum alloys , Chemical etching , Finite element analysis , Milling , Stress

Distinct Element Simulation of Laser Assisted Machining of Silicon Nitride Ceramics: Surface/Subsurface Cracks and Damage

X. Shen, S. Lei

IMECE 2005; 1267-1274https://doi.org/10.1115/IMECE2005-80545

Abstract

View Articletitled, Distinct Element Simulation of Laser Assisted Machining of Silicon Nitride Ceramics: Surface/Subsurface Cracks and Damage

PDF

Topics: Damage , Fracture (Materials) , Lasers , Machining , Silicon nitride ceramics , Simulation

Surface Enhacement of Large Dies and Moulds by Ball-Burnishing

L. Norberto Lo´pez de Lacalle, Aitzol Lamikiz, Julen Mun˜oa

IMECE 2005; 1275-1278https://doi.org/10.1115/IMECE2005-80748

Abstract

View Articletitled, Surface Enhacement of Large Dies and Moulds by Ball-Burnishing

PDF

Topics: Finishing , Machining , Metal stamping , Milling , Surface finishing , Surface roughness

Finite Element Modeling of Stresses Induced by High Speed Machining With Round Edge Cutting Tools

Tugrul O¨zel, Erol Zeren

IMECE 2005; 1279-1287https://doi.org/10.1115/IMECE2005-81046

Abstract

View Articletitled, Finite Element Modeling of Stresses Induced by High Speed Machining With Round Edge Cutting Tools

PDF

Topics: Cutting tools , Finite element analysis , High speed machining , Modeling , Stress , Finite element methods , Cutting , Dynamics (Mechanics) , Surface properties , Deformation

Effect of Alloying, Heat Treatment and Carbon Content on White Layer Formation in Machining of Steels

Sangil Han, Shreyes N. Melkote

IMECE 2005; 1289-1297https://doi.org/10.1115/IMECE2005-81197

Abstract

View Articletitled, Effect of Alloying, Heat Treatment and Carbon Content on White Layer Formation in Machining of Steels

PDF

Topics: Carbon , Heat treating (Metalworking) , Machining , Steel , Cutting , Engineering simulation , Finite element analysis , Simulation , Stress , Temperature

Manufacturing (Industry Oriented)

General

Hydrodynamics of Moulding of Ceramic Articles From Beryllium Oxide Using Ultrasonic Activation

U. K. Zhapbasbayev, A. Kaltayev, G. D. Bitsoev, S. K. Turnayev

IMECE 2005; 1301-1307https://doi.org/10.1115/IMECE2005-79843

Abstract

View Articletitled, Hydrodynamics of Moulding of Ceramic Articles From Beryllium Oxide Using Ultrasonic Activation

PDF

Topics: Ceramics , Hydrodynamics , Molding , Slurries

Shock Wave of Gas-Solid Flow Considering the Two-Phase Sound Velocity

Liangju Zhao, Lijuan Gao, Qinghua Chen, Hong Gao, Danling Zeng

IMECE 2005; 1309-1313https://doi.org/10.1115/IMECE2005-80528

Abstract

View Articletitled, Shock Wave of Gas-Solid Flow Considering the Two-Phase Sound Velocity

PDF

Topics: Flow (Dynamics) , Shock waves , Speed of sound

Electrolytic Micro Machining Technology

Donald G. Risko

IMECE 2005; 1315-1320https://doi.org/10.1115/IMECE2005-81451

Abstract

View Articletitled, Electrolytic Micro Machining Technology

PDF

Topics: Micromachining , Machining , Machinery , Tooling , Airfoils , Diesel , Economics , Electrolytes , Gas turbines , Nozzles

Large Eddy Simulation of a Three Dimensional Buoyant Jet

M. Satish, F. Ma, M. R. Islam

IMECE 2005; 1321-1330https://doi.org/10.1115/IMECE2005-82410

Abstract

View Articletitled, Large Eddy Simulation of a Three Dimensional Buoyant Jet

PDF

Topics: Large eddy simulation , Shapes , Computer simulation , Bifurcation , Buoyancy , Flow (Dynamics) , Fluids , Trajectories (Physics) , Turbulence

Non-Equilibrium Dissolution Kinetics of Micro-Size Metal Particles in Lead-Free Solders

M. Faizan, G.-X. Wang

IMECE 2005; 1331-1337https://doi.org/10.1115/IMECE2005-82768

Abstract

View Articletitled, Non-Equilibrium Dissolution Kinetics of Micro-Size Metal Particles in Lead-Free Solders

PDF

Topics: Equilibrium (Physics) , Lead-free solders , Metals , Particulate matter , Soldering

Plant Engineering and Maintenance

Creep Void Growth Simulation for Reliable Maintenance of High Temperature Components

Takashi Ogata

IMECE 2005; 1341-1346https://doi.org/10.1115/IMECE2005-79215

Abstract

View Articletitled, Creep Void Growth Simulation for Reliable Maintenance of High Temperature Components

PDF

Topics: Creep , Damage , High temperature , Maintenance , Rotors , Simulation , Turbines

New Sealing Technology to Overcome Plant/Piping Leakages

Anatoly I. Efremov

IMECE 2005; 1347-1350https://doi.org/10.1115/IMECE2005-79635

Abstract

View Articletitled, New Sealing Technology to Overcome Plant/Piping Leakages

PDF

Topics: Leakage , Pipes , Sealing (Process) , Creep , Fasteners , Maintenance , Gaskets , Flange connections , Fossil fuels , Nuclear power

A 100 Motor Study: Investigating Pre-EPA Motors as a Subset of the Industrial Motor Population for Its Effects on the Economic of Motor Replacement, Preliminary Results

Nicole M. Kaufman, Daniel Welch, Richard R. Johnson

IMECE 2005; 1351-1358https://doi.org/10.1115/IMECE2005-79693

Abstract

View Articletitled, A 100 Motor Study: Investigating Pre-EPA Motors as a Subset of the Industrial Motor Population for Its Effects on the Economic of Motor Replacement, Preliminary Results

PDF

Topics: Motors , Maintenance , Computer software , Economics , Electromagnetic induction , Failure

Application of Adaptive Neuro-Fuzzy Inference System in Field Balancing

Shi Liu, Liangsheng Qu

IMECE 2005; 1359-1367https://doi.org/10.1115/IMECE2005-80367

Abstract

View Articletitled, Application of Adaptive Neuro-Fuzzy Inference System in Field Balancing

PDF

Topics: Bearings , Computer simulation , Machinery , Rotors , Sensors , Simulation , Turbogenerators , Vibration , Weight (Mass)

Performance Charateristics of Advanced Gas Turbine Cogeneration Power Plants

Meherwan P. Boyce

IMECE 2005; 1369-1380https://doi.org/10.1115/IMECE2005-82325

Abstract

View Articletitled, Performance Charateristics of Advanced Gas Turbine Cogeneration Power Plants

PDF

Topics: Cogeneration plants , Gas turbines , Turbines , Temperature , Cycles , Firing , Combined cycles , Compressors , Flow (Dynamics) , Heat recovery steam generators

Scope and Benefits of a New Comprehensive Diagnostic Approach for Pneumatic Systems and Components

J. Binder, H. Gerlach, C. Boehm

IMECE 2005; 1381-1386https://doi.org/10.1115/IMECE2005-82341

Abstract

View Articletitled, Scope and Benefits of a New Comprehensive Diagnostic Approach for Pneumatic Systems and Components

PDF

Topics: Life cycle costing , Pneumatic systems , Maintenance , Production facilities , Cycles , Downtime , Evaluation methods , Machinery , Maintainability , Pattern recognition

The Value of Enterprise Data Integration and Trending Analysis Results for an Effective Equipment Reliability Program

Evan Niemkiewicz, Walter Walejeski

IMECE 2005; 1387-1392https://doi.org/10.1115/IMECE2005-82408

Abstract

View Articletitled, The Value of Enterprise Data Integration and Trending Analysis Results for an Effective Equipment Reliability Program

PDF

Topics: Data fusion , Reliability , Databases , Computer software , Condition monitoring , Energy industry , Maintenance

Materials Handling Engineering

Virtual Manufacturing and Material Handling

Pallet Leveling Sensor System

Stephen J. Derby, Bernhard Bringmann

IMECE 2005; 1397-1402https://doi.org/10.1115/IMECE2005-79054

Abstract

View Articletitled, Pallet Leveling Sensor System

PDF

Topics: Pallets , Sensors , Computers , Compressed air , Engineering prototypes , Forklifts

The Effect of Electrode Shape and Force on the Contact Resistance of Spot Welded Joints

Ugur Esme, AyCa Cakmak

IMECE 2005; 1403-1407https://doi.org/10.1115/IMECE2005-79166

Abstract

View Articletitled, The Effect of Electrode Shape and Force on the Contact Resistance of Spot Welded Joints

PDF

Topics: Contact resistance , Electrodes , Shapes , Welded joints , Welding

An Application of Swept-Volume Computation In Machine Tool Probing

Bilal Maiteh

IMECE 2005; 1409-1413https://doi.org/10.1115/IMECE2005-79293

Abstract

View Articletitled, An Application of Swept-Volume Computation In Machine Tool Probing

PDF

Topics: Computation , Machine tools , Manufacturing , Algorithms , Collisions (Physics) , Computer numerical control machine tools , Computer software , Drilling , Milling

Joystick Ergonomic Study in Material Handling Using Virtual Humans

Esteban Pen˜a Pitarch, Jingzhou Yang, Karim Abdel-Malek, Joo Kim, Tim Marler

IMECE 2005; 1415-1420https://doi.org/10.1115/IMECE2005-79968

Abstract

View Articletitled, Joystick Ergonomic Study in Material Handling Using Virtual Humans

PDF

Topics: Materials handling , Wounds

Automated Guided Vehicle Systems Trends in Technology and Application

L. Schulze, M. Lucas, A. Baumann

IMECE 2005; 1421-1427https://doi.org/10.1115/IMECE2005-80366

Abstract

View Articletitled, Automated Guided Vehicle Systems Trends in Technology and Application

PDF

Topics: Vehicles , Automated guided vehicles , Logistics , Computer software , Construction , Databases , Forklifts , Hardware , Industrial research , Lasers

Using System Engineering Approach to Implement Value Stream Mapping (VSM) Tool in Manufacturing Service Environment

Z. Y. Wang, Rama S. Koripelli, Sucharitha Aekula

IMECE 2005; 1429-1436https://doi.org/10.1115/IMECE2005-80538

Abstract

View Articletitled, Using System Engineering Approach to Implement Value Stream Mapping (VSM) Tool in Manufacturing Service Environment

PDF

Topics: Manufacturing , Systems engineering , Doors , Engineers , Vehicles

Mathematical Solution for the Determination of Optimal Warehouse Location and Optimal Distribution Route

Jagannadha Rao Naraparaju, Raghunandan A. Karamcheti, Z. Y. Wang

IMECE 2005; 1437-1444https://doi.org/10.1115/IMECE2005-80542

Abstract

View Articletitled, Mathematical Solution for the Determination of Optimal Warehouse Location and Optimal Distribution Route

PDF

Topics: Warehouses

Lifting Posture Analysis in Material Handling Using Virtual Humans

Joo H. Kim, Karim Abdel-Malek, Jingzhou Yang, Timothy Marler, Kyle Nebel

IMECE 2005; 1445-1453https://doi.org/10.1115/IMECE2005-81801

Abstract

View Articletitled, Lifting Posture Analysis in Material Handling Using Virtual Humans

PDF

Topics: Materials handling , Optimization , Torque , Wounds , Risk , Chain , Equations of motion , Musculoskeletal system , Stress

A General Approach for Introducing Materials Handling Topics in a Mechanical Engineering Degree Course

W. John Dartnall

IMECE 2005; 1455-1463https://doi.org/10.1115/IMECE2005-82004

Abstract

View Articletitled, A General Approach for Introducing Materials Handling Topics in a Mechanical Engineering Degree Course

PDF

Topics: Materials handling , Mechanical engineering , Students , Bulk solids , Particulate matter , Undergraduate students , Design , Conveyor belts , Conveyor systems , Design engineering

Investigation of a Framework for Collaborative Activities Across Heterogeneous Engineering Domains

N. Gobinath, J. Cecil

IMECE 2005; 1465-1472https://doi.org/10.1115/IMECE2005-82105

Abstract

View Articletitled, Investigation of a Framework for Collaborative Activities Across Heterogeneous Engineering Domains

PDF

Topics: Atomic force microscopy , Carbon , Collaboration , Design , Generators , Manipulators , Manufacturing , Nanotubes , Particulate matter , Probes