Topics: Copper , Epoxy adhesives , Epoxy resins , Fibers , Fracture (Materials) , Fracture (Process) , Fracture toughness , Composite materials , Shapes , Shrinkage (Materials)

Characterization of Magnesium/Carbon Nanotubes Composites Synthesized Using an Innovative Solidification Method

C. S. Goh, M. Gupta, J. Wei, L. C. Lee, K. W. Lim

IMECE 2004; 7-10https://doi.org/10.1115/IMECE2004-60457

Abstract

View Articletitled, Characterization of Magnesium/Carbon Nanotubes Composites Synthesized Using an Innovative Solidification Method

PDF

Topics: Carbon nanotubes , Composite materials , Magnesium (Metal) , Solidification , Weight (Mass) , Extruding , Mechanical properties , Nanocomposites , Temperature , Thermal expansion

Ballistic Damage Evaluation of Thick-Section S-2 Glass/SC15 Composites With and Without Predefined Delaminations

Bazle A. Gama, Mostafezur Rahman, Chris P. R. Hoppel, John W. Gillespie, Jr.

IMECE 2004; 11-15https://doi.org/10.1115/IMECE2004-60606

Abstract

View Articletitled, Ballistic Damage Evaluation of Thick-Section S-2 Glass/SC15 Composites With and Without Predefined Delaminations

PDF

Topics: Composite materials , Damage , Delamination , Glass , Projectiles , American Petroleum Institute , Circular cylinders , Energy budget (Physics) , Epoxy adhesives , Epoxy resins

Long-Term Creep and Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated Temperatures

Siarajus Salekeen, Mohammad M. Rahman, Hassan Mahfuz, Shaik Jeelani

IMECE 2004; 17-30https://doi.org/10.1115/IMECE2004-60936

Abstract

View Articletitled, Long-Term Creep and Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated Temperatures

PDF

Topics: Ceramic matrix composites , Creep , Rupture , Temperature

Failure Identification Methodology for Woven Composites Incorporating Sensor Degradation

James Pearson, Mohanraj Prabhugoud, Mohammed Zikry, Kara Peters

IMECE 2004; 31-40https://doi.org/10.1115/IMECE2004-61802

Abstract

View Articletitled, Failure Identification Methodology for Woven Composites Incorporating Sensor Degradation

PDF

Topics: Failure , Sensors , Woven composites , Fibers , Composite materials , Damage , Data fusion , Diffraction gratings , Fiber Bragg gratings , Fracture (Materials)

Evaluation of Residual Thermal Stresses of Fibrous Composites

G. Karami, Eric Schwingler, G. H. Nazari

IMECE 2004; 41-46https://doi.org/10.1115/IMECE2004-62214

Abstract

View Articletitled, Evaluation of Residual Thermal Stresses of Fibrous Composites

PDF

Topics: Fiber reinforced composites , Thermal stresses

Mechanical Properties of Matrix Hybrid Thick-Composites

Hiroyuki Hamada, Asami Nakai, Kazuya Eto, Kenichi Sugimoto

IMECE 2004; 47-52https://doi.org/10.1115/IMECE2004-62305

Abstract

View Articletitled, Mechanical Properties of Matrix Hybrid Thick-Composites

PDF

Topics: Composite materials , Mechanical properties , Fracture toughness , Resins , Boats , Die cutting , Fracture (Materials) , Fracture (Process) , Plates (structures) , Safety

Constitutive Equations

Three-Dimensional Continuum Damage Model for Polymer Matrix Composites

Ever J. Barbero, Joan A. Mayugo, Paolo Lonetti

IMECE 2004; 53-61https://doi.org/10.1115/IMECE2004-59171

Abstract

View Articletitled, Three-Dimensional Continuum Damage Model for Polymer Matrix Composites

PDF

Topics: Damage , Polymer composites , Laminates , Composite materials , Constitutive equations , Damage mechanics , Deformation , Failure mechanisms , Fiber reinforced composites , Materials properties

Micromechanics-Based Elastoplastic and Damage Modeling of Particle Reinforced Composites

H. T. Liu, Lizhi Sun, J. W. Ju

IMECE 2004; 63-70https://doi.org/10.1115/IMECE2004-59303

Abstract

View Articletitled, Micromechanics-Based Elastoplastic and Damage Modeling of Particle Reinforced Composites

PDF

Topics: Damage , Micromechanics (Engineering) , Modeling , Particle reinforced composites , Composite materials , Particulate matter , Anisotropy , Deformation , Hardening , Plasticity

Characterization of Indentation-Induced “Particle Crowding” in Metal Matrix Composites

R. Pereyra, Y.-L. Shen

IMECE 2004; 71-77https://doi.org/10.1115/IMECE2004-60560

Abstract

View Articletitled, Characterization of Indentation-Induced “Particle Crowding” in Metal Matrix Composites

PDF

Topics: Metal matrix composites , Particulate matter , Composite materials , Compressive stress , Cross section (Physics) , Experimental characterization , Finite element analysis , Metallography

Multi-Scale Micro-Mechanical Poroelastic Modeling of Fluid Flow in Cortical Bone

Colby C. Swan, Hyung-Joo Kim

IMECE 2004; 79-90https://doi.org/10.1115/IMECE2004-61002

Abstract

View Articletitled, Multi-Scale Micro-Mechanical Poroelastic Modeling of Fluid Flow in Cortical Bone

PDF

Topics: Bone , Fluid dynamics , Modeling , Fluids , Deformation , Flow (Dynamics) , Fluid pressure , Microscale devices , Stress , Anisotropy

Pore Fluid Effects on Shear Modulus for Sandstones With Soft Anisotropy

James G. Berryman

IMECE 2004; 91-99https://doi.org/10.1115/IMECE2004-61565

Abstract

View Articletitled, Pore Fluid Effects on Shear Modulus for Sandstones With Soft Anisotropy

PDF

Topics: Anisotropy , Fluids , Shear modulus , Shear (Mechanics) , Eigenvalues , Compression , Fluid mechanics , Isotropy , Rivers , Rocks

Electronic Materials

Engineering Monolayers With Strain Field

Dongchoul Kim, Wei Lu

IMECE 2004; 101-105https://doi.org/10.1115/IMECE2004-59999

Abstract

View Articletitled, Engineering Monolayers With Strain Field

PDF

Topics: Design , Nanoscale phenomena , Self-assembly , Shapes

Microstructure Evolution During Alternating-Current-Induced Fatigue

R. R. Keller, R. H. Geiss, Y.-W. Cheng, D. T. Read

IMECE 2004; 107-112https://doi.org/10.1115/IMECE2004-61291

Abstract

View Articletitled, Microstructure Evolution During Alternating-Current-Induced Fatigue

PDF

Topics: Circuits , Cycles , Damage , Deformation , Density , Electron backscatter diffraction , Failure , Fatigue , Fibers , Lithography

Mechanical Behavior of Electrodeposited Copper Film at Elevated Temperatures

D. T. Read, Y.-W. Cheng, R. Geiss

IMECE 2004; 113-116https://doi.org/10.1115/IMECE2004-61320

Abstract

View Articletitled, Mechanical Behavior of Electrodeposited Copper Film at Elevated Temperatures

PDF

Topics: Copper , Mechanical behavior , Temperature , Crystals , Elastic constants , Elongation , Failure , Stress , Temperature effects , Tensile strength

Analysis of Indentation-Derived Yield Strength in Metallic Multilayers

X. H. Tan, Y.-L. Shen

IMECE 2004; 117-122https://doi.org/10.1115/IMECE2004-61393

Abstract

View Articletitled, Analysis of Indentation-Derived Yield Strength in Metallic Multilayers

PDF

Topics: Yield strength , Composite materials , Mechanical properties , Finite element analysis , Flow (Dynamics) , Friction , Modeling , Nanoindentation , Plastics , Probes

Reliability Issues in MEMS Related to Cyclic Loading Conditions

Oliver Kraft, Cynthia A. Volkert

IMECE 2004; 123-124https://doi.org/10.1115/IMECE2004-61637

Abstract

View Articletitled, Reliability Issues in MEMS Related to Cyclic Loading Conditions

PDF

Topics: Microelectromechanical systems , Reliability , Temperature , Stress , Metals , Thin films , Heating , Sensors , Tension , Thermal expansion

Materials Processing

Growth of Microcellular Foams in Viscoelastic Mediums

Ki Young Kim, Sung Lin Kang, Ho-Young Kwak

IMECE 2004; 125-132https://doi.org/10.1115/IMECE2004-59490

Abstract

View Articletitled, Growth of Microcellular Foams in Viscoelastic Mediums

PDF

Topics: Foams (Chemistry) , Bubbles , Pressure , Boundary layers , Diffusion processes , Polymers

The Theoretical and Experimental Evaluation of Gas-Particle Flow in Laser Cladding Repairing of Three Dimensions

Hui-Shan Li, Xi-Chen Yang, Chun-Xian Wang

IMECE 2004; 133-141https://doi.org/10.1115/IMECE2004-59950

Abstract

View Articletitled, The Theoretical and Experimental Evaluation of Gas-Particle Flow in Laser Cladding Repairing of Three Dimensions

PDF

Topics: Cladding systems (Building) , Dimensions , Flow (Dynamics) , Lasers , Maintenance , Particulate matter

Electron Spin Resonance Investigations on Polystyrene-Carbon Nanotubes Composites

Mircea Chipara, Jagannathan Sankar, David Hui

IMECE 2004; 143-146https://doi.org/10.1115/IMECE2004-60766

Abstract

View Articletitled, Electron Spin Resonance Investigations on Polystyrene-Carbon Nanotubes Composites

PDF

Topics: Carbon , Carbon nanotubes , Composite materials , Electron paramagnetic resonance , Nanotubes

Mechanical Property and Processing Investigation of Pulsed Laser Deposited Al₂O₃ and AlN-TiN Thin Films

Xinyu Wang, Cindy Waters, Sergey Yarmolenko, Dhananjay Kumar, Jagannathan Sankar

IMECE 2004; 147-151https://doi.org/10.1115/IMECE2004-61000

Abstract

View Articletitled, Mechanical Property and Processing Investigation of Pulsed Laser Deposited Al<sub>2</sub>O<sub>3</sub> and AlN-TiN Thin Films

PDF

Topics: Fracture toughness , Lasers , Mechanical properties , Thin films

Processing of Composite Cathode and YSZ Coatings for Solid Oxide Fuel Cells

Zhigang Xu, Devdas Pai, Jag Sankar

IMECE 2004; 153-160https://doi.org/10.1115/IMECE2004-61012

Abstract

View Articletitled, Processing of Composite Cathode and YSZ Coatings for Solid Oxide Fuel Cells

PDF

Topics: Coatings , Composite materials , Solid oxide fuel cells , Slurries , Ball milling , Porosity , Sintering , Casting , Electrophoretic deposition , Grain size

The Utilization of Flow Control During Multi-Cavity Injection Molding Processes

Gregory S. Layser, John P. Coulter, Gregory M. Bielawiec

IMECE 2004; 161-168https://doi.org/10.1115/IMECE2004-61801

Abstract

View Articletitled, The Utilization of Flow Control During Multi-Cavity Injection Molding Processes

PDF

Topics: Cavities , Flow control , Injection molding , Valves , Tooling , Flow (Dynamics) , Pressure , Computer simulation , Engineering simulation , Manufacturing

Effects of DC Current on the Stress-Strain Curve and Hardness of 6061 T6511 Aluminum

Joseph S. Andrawes, Jarred C. Heigel, John T. Roth, Russell L. Warley

IMECE 2004; 169-178https://doi.org/10.1115/IMECE2004-61829

Abstract

View Articletitled, Effects of DC Current on the Stress-Strain Curve and Hardness of 6061 T6511 Aluminum

PDF

Topics: Aluminum , Stress-strain curves

Metallic Materials

Study on Unstable Brittle Crack Arrest Toughness of Extremely-Low Carbon Bainitic Steel Plates

Tsunehisa Handa, Takahiro Kubo, Keniti Amano, Mitsuhiro Okatsu, Kazunori Miyamoto, Michio Satoh

IMECE 2004; 179-185https://doi.org/10.1115/IMECE2004-59739

Abstract

View Articletitled, Study on Unstable Brittle Crack Arrest Toughness of Extremely-Low Carbon Bainitic Steel Plates

PDF

Topics: Brittleness , Carbon , Fracture (Materials) , Fracture toughness , Plates (structures) , Steel , Phase transition temperature , High strength steel , Microcracks , Notch testing

Activation Energy Measurement in Thin Gold Film by MEMS-Based Tensile Testing Device

Jong H. Han, Taher M. Saif

IMECE 2004; 187-190https://doi.org/10.1115/IMECE2004-61385

Abstract

View Articletitled, Activation Energy Measurement in Thin Gold Film by MEMS-Based Tensile Testing Device

PDF

Topics: Microelectromechanical systems , Relaxation (Physics) , Stress , Tensile testing , Thin films

Elongation Variability of AM60 Die Cast Specimens

Xiaoming Chen, David A. Wagner, Dan Q. Houston, Ronald P. Cooper

IMECE 2004; 191-198https://doi.org/10.1115/IMECE2004-61711

Abstract

View Articletitled, Elongation Variability of AM60 Die Cast Specimens

PDF

Topics: Elongation , Instrumentation , Magnesium (Metal) , Plates (structures) , Yield stress , Casting , Flow (Dynamics) , Materials properties , Tensile strength , Testing