Topics: Electronics , Manufacturing , Surface mount technology , Testing , Concurrent engineering , Cycles , Engineers , Printed circuit board assemblies , Printed circuit boards , Teams

Virtual Reality Environment for Creation of Freeform Models

Bilal Y. Maiteh

IMECE 2002; 31-35https://doi.org/10.1115/IMECE2002-32399

Abstract

View Articletitled, Virtual Reality Environment for Creation of Freeform Models

PDF

Topics: Freeform models , Virtual reality , Design , Algorithms , Solid models

A Quantitive Analysis on Virtual Reality-Based Computer Aided Design System Interfaces

Chi-Cheng Chu, Rajit Gadh

IMECE 2002; 37-45https://doi.org/10.1115/IMECE2002-32465

Abstract

View Articletitled, A Quantitive Analysis on Virtual Reality-Based Computer Aided Design System Interfaces

PDF

Topics: Computer-aided design , User interfaces , Virtual reality

An Architecture for the Development of Multi-Component Software Tools for Virtual Manufacturing

Patrick N. Bless, Shiv G. Kapoor, Richard E. DeVor

IMECE 2002; 47-56https://doi.org/10.1115/IMECE2002-32466

Abstract

View Articletitled, An Architecture for the Development of Multi-Component Software Tools for Virtual Manufacturing

PDF

Topics: Computer software , Virtual assembly , Optimization , Computer-aided manufacturing , Drilling , Geometry , Hole quality , Manufacturing , Ontologies , Simulation

Creating Freeform Model by Carving Virtual Workpiece With Haptic Interface

Ming C. Leu, Aditya Velivelli, Xiaobo Peng

IMECE 2002; 57-64https://doi.org/10.1115/IMECE2002-32467

Abstract

View Articletitled, Creating Freeform Model by Carving Virtual Workpiece With Haptic Interface

PDF

Topics: Freeform models , Haptics , Virtual reality , Algorithms , Computers , Force feedback , Geometric modeling , Rendering

A DAI-Based Framework for the Virtual Prototyping of Fluid Power Systems

S. C. Fok, G. L. Thimm, W. Xiang

IMECE 2002; 65-70https://doi.org/10.1115/IMECE2002-32468

Abstract

View Articletitled, A DAI-Based Framework for the Virtual Prototyping of Fluid Power Systems

PDF

Topics: Fluid power systems , Multi-agent systems , Artificial intelligence , Collaboration , Hydraulic drive systems

A Supervisory Data-Traffic Controller in Collaborative Virtual Reality Simulations

Ali Akgunduz, Pat Banerjee

IMECE 2002; 71-78https://doi.org/10.1115/IMECE2002-32470

Abstract

View Articletitled, A Supervisory Data-Traffic Controller in Collaborative Virtual Reality Simulations

PDF

Topics: Control equipment , Simulation , Traffic , Virtual reality , Control systems , Filtration

Process and Properties Control in Laser Aided Direct Metal/Materials Deposition Process

J. Choi

IMECE 2002; 81-89https://doi.org/10.1115/IMECE2002-33568

Abstract

View Articletitled, Process and Properties Control in Laser Aided Direct Metal/Materials Deposition Process

PDF

Topics: Lasers , Metals

Stamping Die Strip Optimization for Paired Parts

Vasile Vamanu, T. J. Nye

IMECE 2002; 91-96https://doi.org/10.1115/IMECE2002-33572

Abstract

View Articletitled, Stamping Die Strip Optimization for Paired Parts

PDF

Topics: Design , Metal stamping , Optimization , Strips

Modeling Variation Propagation in Machining Systems With Different Configurations

Weiping Zhong, Ying Huang, S. Jack Hu

IMECE 2002; 97-106https://doi.org/10.1115/IMECE2002-33581

Abstract

View Articletitled, Modeling Variation Propagation in Machining Systems With Different Configurations

PDF

Topics: Kinematics , Machining , Modeling

A Kinematic Approach to the Design and Analysis of Optimal Machining Fixtures

Rodrigo A. Marin, Placid M. Ferreira

IMECE 2002; 107-116https://doi.org/10.1115/IMECE2002-33587

Abstract

View Articletitled, A Kinematic Approach to the Design and Analysis of Optimal Machining Fixtures

PDF

Topics: Design , Kinematics , Machining , Algebra , Robustness , Fixturing , Friction , Screws

Configuration-Space Searching and Optimizing Tool Orientations for 5-Axis Machining

Cha-Soo Jun, Yuan-Shin Lee, Kyungduck Cha

IMECE 2002; 117-127https://doi.org/10.1115/IMECE2002-33598

Abstract

View Articletitled, Configuration-Space Searching and Optimizing Tool Orientations for 5-Axis Machining

PDF

Topics: Algorithms , Machining

Some Theory and Algorithms Pertaining to Machinability and Visibility

Mahadevan Balasubramaniam, Taejung Kim, Sanjay Sarma

IMECE 2002; 129-138https://doi.org/10.1115/IMECE2002-33603

Abstract

View Articletitled, Some Theory and Algorithms Pertaining to Machinability and Visibility

PDF

Topics: Algorithms , Machinability , Machining , Path planning , Cutting tools , Geometry , Robotics

A Metric-Based Approach to 2D Tool-Path Optimization for High-Speed Machining

Hongcheng Wang, James A. Stori

IMECE 2002; 139-148https://doi.org/10.1115/IMECE2002-33610

Abstract

View Articletitled, A Metric-Based Approach to 2D Tool-Path Optimization for High-Speed Machining

PDF

Topics: Machining , Optimization , Algorithms , Cutting , Dynamic systems , Milling , Steady state , Trajectories (Physics)

A Curvilinear Tool-Path Method for Pocket Machining

Michael B. Bieterman, Donald R. Sandstrom

IMECE 2002; 149-158https://doi.org/10.1115/IMECE2002-33611

Abstract

View Articletitled, A Curvilinear Tool-Path Method for Pocket Machining

PDF

Topics: Machining , Cutting , Metals , Boundary-value problems , Equipment performance , Machinery , Milling , Optimization , Partial differential equations , Wear

Minimum Time Trajectory Planning Along Specified Tool Path With Consideration of Cutting Force Constraint and Feed Drive Dynamics

Nejah Tounsi, Trevor E. Bailey, Mohamed A. Elbestawi

IMECE 2002; 159-169https://doi.org/10.1115/IMECE2002-33613

Abstract

View Articletitled, Minimum Time Trajectory Planning Along Specified Tool Path With Consideration of Cutting Force Constraint and Feed Drive Dynamics

PDF

Topics: Cutting , Dynamics (Mechanics) , Trajectories (Physics)

Adaptive Feedrate Scheduling and Material Engagement Analysis for High Performance Machining

Jirawan Kloypayan, Yuan-Shin Lee

IMECE 2002; 171-179https://doi.org/10.1115/IMECE2002-33615

Abstract

View Articletitled, Adaptive Feedrate Scheduling and Material Engagement Analysis for High Performance Machining

PDF

Topics: Machining , Computer-aided design , Cutting , Geometry , High speed machining , Milling , Stress

Efficient NC Machining Using Off-Line Optimized Feedrates and On-Line Adaptive Control

N. D. Richards, B. K. Fussell, R. B. Jerard

IMECE 2002; 181-191https://doi.org/10.1115/IMECE2002-33618

Abstract

View Articletitled, Efficient NC Machining Using Off-Line Optimized Feedrates and On-Line Adaptive Control

PDF

Topics: Adaptive control , Machining , Control equipment , Cutting , Errors , Force control , Geometry , Milling , Optimization algorithms , Chatter

The Effects of Structural and Servo Modes in Titanium Machining

K. Scott Smith, Bethany A. Lamy

IMECE 2002; 193-200https://doi.org/10.1115/IMECE2002-33627

Abstract

View Articletitled, The Effects of Structural and Servo Modes in Titanium Machining

PDF

Topics: Machining , Servomechanisms , Titanium

3D Finite Element Analysis for the High Speed Machining of Hardened Steel

Eu-gene Ng, Tahany I. El-Wardany, Mihaela Dumitrescu, Mohamed A. Elbestawi

IMECE 2002; 201-209https://doi.org/10.1115/IMECE2002-33633

Abstract

View Articletitled, 3D Finite Element Analysis for the High Speed Machining of Hardened Steel

PDF

Topics: Crack propagation , Cutting , Finite element analysis , Finite element model , High speed machining , Machining , Martensitic steel , Modeling , Steel , Stress

Tool Performance in High Speed Finish Milling of Ti6Al4V

D. Barnett-Ritcey, M. A. Elbestawi

IMECE 2002; 211-219https://doi.org/10.1115/IMECE2002-33655

Abstract

View Articletitled, Tool Performance in High Speed Finish Milling of Ti6Al4V

PDF

Topics: Finishes , Milling , Coolants , Wear , Alloys , Failure , Floods , Fracture (Materials) , Fracture (Process) , Stress

An AI-Based Model for Predicting Instananeous Cutting Force in End Milling

Hazim El-Mounayri, Vipul Tandon

IMECE 2002; 221-229https://doi.org/10.1115/IMECE2002-33662

Abstract

View Articletitled, An AI-Based Model for Predicting Instananeous Cutting Force in End Milling

PDF

Topics: Artificial neural networks , Cutting , Milling

Predicting Surface Roughness in End Milling Using an Innovative Technique From EC (Evolutionary Computation)

Hazim El-Mounayri, Zakir Dugla, Haiyan Deng

IMECE 2002; 233-240https://doi.org/10.1115/IMECE2002-39073

Abstract

View Articletitled, Predicting Surface Roughness in End Milling Using an Innovative Technique From EC (Evolutionary Computation)

PDF

Topics: Evolutionary computation , Milling , Particle swarm optimization , Surface roughness

Smart Materials-Based Structural Vibration Isolation for Minimizing Product Quality Variation Using H_∞-Based Optimal Control

J. A. Turso, J. T. Roth

IMECE 2002; 241-248https://doi.org/10.1115/IMECE2002-39074

Abstract

View Articletitled, Smart Materials-Based Structural Vibration Isolation for Minimizing Product Quality Variation Using H<sub>∞</sub>-Based Optimal Control

PDF

Topics: Optimal control , Product quality , Vibration isolation , Control equipment , Piezoelectric actuators , Production equipment , Sensors , Simulation , Testing , Uncertainty

Closed-Loop Feedback Control of Production Part Errors

Tom Bering, Stephen C. Veldhuis, Greg Bryson, Peter Detmers

IMECE 2002; 249-257https://doi.org/10.1115/IMECE2002-39088

Abstract

View Articletitled, Closed-Loop Feedback Control of Production Part Errors

PDF

Topics: Computer numerical control machine tools , Coordinate measuring machines , Errors , Feedback , Statistical process control

Tribological Aspects of Workpiece/Fixture Contact in Machining Processes

Ibrahim M. Deiab, Mohamed A. Elbestawi

IMECE 2002; 259-267https://doi.org/10.1115/IMECE2002-39092

Abstract

View Articletitled, Tribological Aspects of Workpiece/Fixture Contact in Machining Processes

PDF

Topics: Machining , Tribology , Surface roughness , Design , Dynamic models , Errors , Friction , Milling , Stress

Hybrid Spindle Current Regulation System With Tool Wear Detection Algorithm

Taik M. Lee, Min Y. Yang

IMECE 2002; 269-275https://doi.org/10.1115/IMECE2002-39097

Abstract

View Articletitled, Hybrid Spindle Current Regulation System With Tool Wear Detection Algorithm

PDF

Topics: Adaptive control , Algorithms , Milling , Wear , Cutting , Computer numerical control machine tools , Control algorithms , Delays , Feedback , Stability

A Study on the High Speed Face Milling of Ti-6Al-4V Alloy

Balkrishna Rao, Yung C. Shin

IMECE 2002; 277-286https://doi.org/10.1115/IMECE2002-39098

Abstract

View Articletitled, A Study on the High Speed Face Milling of Ti-6Al-4V Alloy

PDF

Topics: Alloys , Milling , Cutting , Wear , Diamonds , Experimental analysis , Machining , Coolants , Cutting tools , Diamond tools

Flank Wear of Edge-Radiused Cutting Tools Under Ideal Straight-Edged Orthogonal Conditions

Raja K. Kountanya, William J. Endres

IMECE 2002; 287-296https://doi.org/10.1115/IMECE2002-39100

Abstract

View Articletitled, Flank Wear of Edge-Radiused Cutting Tools Under Ideal Straight-Edged Orthogonal Conditions

PDF

Topics: Cutting tools , Wear , Chatter , Errors , Finishes , Geometry , Sharpening , Wear testing

Analysis of the Machining Process Using a Thermo-Elastic-Viscoplastic Finite Element Model

N. Balihodzic, H. A. Kishawy, R. J. Rogers

IMECE 2002; 297-306https://doi.org/10.1115/IMECE2002-39109

Abstract

View Articletitled, Analysis of the Machining Process Using a Thermo-Elastic-Viscoplastic Finite Element Model

PDF

Topics: Finite element model , Machining , Stress , Cutting , Ceramics , Deformation , Engineering simulation , Geometry , Plane strain , Simulation

Computer Simulation of Three-Dimensional Chip Kinematics in Machining

Ning Fang

IMECE 2002; 307-316https://doi.org/10.1115/IMECE2002-39110

Abstract

View Articletitled, Computer Simulation of Three-Dimensional Chip Kinematics in Machining

PDF

Topics: Computer simulation , Flow (Dynamics) , Kinematics , Machining

Contact Zone Force Profile and Machining Performance of Filamentary Brush

Robert J. Stango, Vikram Cariapa, Mark Zuzanski

IMECE 2002; 317-327https://doi.org/10.1115/IMECE2002-39111

Abstract

View Articletitled, Contact Zone Force Profile and Machining Performance of Filamentary Brush

PDF

Topics: Machining , Control systems , Deburring , Decontamination , Errors , Force sensors , Inertia (Mechanics) , Polishing , Surface finishing , Uncertainty

Modeling of Deformations in a Ring Shaped Workpiece Due to Chucking and Cutting Forces

John A. Malluck, Shreyes N. Melkote

IMECE 2002; 329-335https://doi.org/10.1115/IMECE2002-39112

Abstract

View Articletitled, Modeling of Deformations in a Ring Shaped Workpiece Due to Chucking and Cutting Forces

PDF

Topics: Cutting , Deformation , Modeling , Finite element model , Elasticity , Errors , Stress , Turning

Mechanics and Dynamics of Serrated End Mills

S. Doruk Merdol, Yusuf Altintas

IMECE 2002; 337-342https://doi.org/10.1115/IMECE2002-39114

Abstract

View Articletitled, Mechanics and Dynamics of Serrated End Mills

PDF

Topics: Dynamics (Mechanics) , Cutting , Milling , Chatter , Design , Geometry , Kinematics , Splines , Stability

Analysis of Tension Effect on Chatter Stability in Machining

Richard Y. Chiou, Lin Lu

IMECE 2002; 343-349https://doi.org/10.1115/IMECE2002-39115

Abstract

View Articletitled, Analysis of Tension Effect on Chatter Stability in Machining

PDF

Topics: Chatter , Machining , Stability , Tension , Cutting , Vibration , Design , Fixturing , Machine tools , Optimization

Effects of Radial Immersion and Cutting Direction on Chatter Instability in End-Milling

Philip V. Bayly, Brian P. Mann, Tony L. Schmitz, David A. Peters, Gabor Stepan, Tamas Insperger

IMECE 2002; 351-363https://doi.org/10.1115/IMECE2002-39116

Abstract

View Articletitled, Effects of Radial Immersion and Cutting Direction on Chatter Instability in End-Milling

PDF

Topics: Chatter , Cutting , Milling , Stability , Simulation , Finite element analysis , Dynamic models , Stress

A Frequency Domain Force Model With Shearing and Ploughing Mechanisms for a Generalized Helical End Mill

J.-J. Junz Wang, C. M. Zheng

IMECE 2002; 365-373https://doi.org/10.1115/IMECE2002-39117

Abstract

View Articletitled, A Frequency Domain Force Model With Shearing and Ploughing Mechanisms for a Generalized Helical End Mill

PDF

Topics: Cutting , Die cutting , Milling , Shearing (Deformation)

Simulation of Gas Metal Arc Welding Short Circuiting Transfer Using a Front Tracking Method

Guo Xu, Elijah Kannatey-Asibu, Jr., William W. Schultz, P. C. Wang

IMECE 2002; 377-384https://doi.org/10.1115/IMECE2002-32334

Abstract

View Articletitled, Simulation of Gas Metal Arc Welding Short Circuiting Transfer Using a Front Tracking Method

PDF

Topics: Gas metal arc welding , Simulation , Shear stress , Bridges (Structures) , Computer simulation , Electromagnetic fields , Electromagnetic force , Metals , Momentum , Pressure

Modeling Heat and Mass Transfer and Fluid Flow in Three-Dimensional Gas Metal Arc Welding

Y. Wang, H. L. Tsai, S. P. Marin, P. C. Wang

IMECE 2002; 385-400https://doi.org/10.1115/IMECE2002-32335

Abstract

View Articletitled, Modeling Heat and Mass Transfer and Fluid Flow in Three-Dimensional Gas Metal Arc Welding

PDF

Topics: Fluid dynamics , Gas metal arc welding , Heat , Mass transfer , Modeling , Drops , Welding , Electric arcs , Electromagnetic force , Fillers (Materials)

Fatigue and Fretting of Self-Piercing Riveted Joints

K. Iyer, F. L. Brittman, S. J. Hu, P. C. Wang, D. B. Hayden, S. P. Marin

IMECE 2002; 401-415https://doi.org/10.1115/IMECE2002-32336

Abstract

View Articletitled, Fatigue and Fretting of Self-Piercing Riveted Joints

PDF

Topics: Aluminum alloys , Damage , Fatigue , Fatigue cracks , Fatigue life , Finite element analysis , Fracture (Materials) , Rivets , Stress , Tension

Enhancement of Fatigue Life of Self-Piercing Riveted Joints by Coining

Zheng Jin, P. K. Mallick

IMECE 2002; 417-429https://doi.org/10.1115/IMECE2002-32337

Abstract

View Articletitled, Enhancement of Fatigue Life of Self-Piercing Riveted Joints by Coining

PDF

Topics: Fatigue life , Aluminum alloys , Automotive industry , Compressive stress , Diluents , Riveting , Welding

Compliant Assembly Variation Analysis Using Components Geometric Covariance

Jaime A. Camelio, S. Jack Hu

IMECE 2002; 431-437https://doi.org/10.1115/IMECE2002-32338

Abstract

View Articletitled, Compliant Assembly Variation Analysis Using Components Geometric Covariance

PDF

Topics: Manufacturing , Deformation , Finite element methods , Principal component analysis , Sheet metal , Computation , Design , Joining

Analysis of Nonlinear Variation Accumulation in Auto-Body Assembly Process

Jun Lian, Zhongqin Lin, Fusheng Yao, Xinmin Lai

IMECE 2002; 439-446https://doi.org/10.1115/IMECE2002-32339

Abstract

View Articletitled, Analysis of Nonlinear Variation Accumulation in Auto-Body Assembly Process

PDF

Topics: Manufacturing

Method for Flexible Part Clamping Simulation and Optimization

Ching Hsieh, Fei Liang

IMECE 2002; 447-451https://doi.org/10.1115/IMECE2002-32340

Abstract

View Articletitled, Method for Flexible Part Clamping Simulation and Optimization

PDF

Topics: Optimization , Simulation , Manufacturing , Computer software , Doors , Vehicles

Digital Panel Assembly for Automotive Body-in-White

Wayne Cai, Ronald M. Lesperance, Samuel P. Marin, W. Weston Meyer, Thomas J. Oetjens

IMECE 2002; 453-466https://doi.org/10.1115/IMECE2002-32341

Abstract

View Articletitled, Digital Panel Assembly for Automotive Body-in-White

PDF

Topics: Manufacturing , Computer software , Computer-aided engineering , Dimensions , Finite element analysis

Contact Area Modeling and On-Line Estimation in Resistance Spot Welding

Wei Li

IMECE 2002; 467-473https://doi.org/10.1115/IMECE2002-32342

Abstract

View Articletitled, Contact Area Modeling and On-Line Estimation in Resistance Spot Welding

PDF

Topics: Modeling , Welding , Electrodes , Calibration , Electric current , Engineering simulation , Finite element analysis , Lumped parameter models , Manufacturing , Simulation

Diagnosability Analysis of Multi-Station Manufacturing Processes

Yu Ding, Jianjun Shi, Dariusz Ceglarek

IMECE 2002; 475-484https://doi.org/10.1115/IMECE2002-32343

Abstract

View Articletitled, Diagnosability Analysis of Multi-Station Manufacturing Processes

PDF

Topics: Manufacturing , Sensors , Algorithms , Control theory

Automatic Sequence Planning by Subassembly Detection for Automobile Body Assembly

Yizhu Zhang, Jun Ni, Zhongqin Lin, Xinmin Lai

IMECE 2002; 485-490https://doi.org/10.1115/IMECE2002-32344

Abstract

View Articletitled, Automatic Sequence Planning by Subassembly Detection for Automobile Body Assembly

PDF

Topics: Automobiles , Manufacturing , Design , Economics , Explosions , Product development

Finite Element Simulations of Joints Used in the Automotive Industry

Rishikesh Bhalerao, Brad Heers, Mark Bohm, Marc Schrank

IMECE 2002; 491-496https://doi.org/10.1115/IMECE2002-32345

Abstract

View Articletitled, Finite Element Simulations of Joints Used in the Automotive Industry

PDF

Topics: Automotive industry , Engineering simulation , Finite element analysis , Simulation , Modeling , Adhesives , Aerospace industry , Design , Joining , Rivets

Free Air Ball Forming Process Parameter Analysis for Wire Bonder

Jau-Liang Chen, Hsu-Yang Chang

IMECE 2002; 499-504https://doi.org/10.1115/IMECE2002-33720

Abstract

View Articletitled, Free Air Ball Forming Process Parameter Analysis for Wire Bonder

PDF

Topics: Artificial neural networks , Flames , Taguchi methods , Wire , Electrodes , Errors , Wire bonding

Investigation of Thermal Effect of Packaged CMOS Compatible Pressure Sensor

Chih-Tang Peng, Ji-Cheng Lin, Chun-Te Lin, Kuo-Ning Chiang

IMECE 2002; 505-512https://doi.org/10.1115/IMECE2002-33723

Abstract

View Articletitled, Investigation of Thermal Effect of Packaged CMOS Compatible Pressure Sensor

PDF

Topics: Complementary metal oxide semiconductors , Finite element methods , Pressure sensors , Temperature effects

Model for Acoustic Microscopy Inspection of Microelectronics Packages With Thin Layers

Sridhar Canumalla

IMECE 2002; 513-521https://doi.org/10.1115/IMECE2002-33727

Abstract

View Articletitled, Model for Acoustic Microscopy Inspection of Microelectronics Packages With Thin Layers

PDF

Topics: Acoustics , Inspection , Microelectronic devices , Microscopy , Delamination , Fracture (Materials) , Trains , Wavelength

Failure Mechanism Study of Anisotropic Conductive Film (ACF) Packages

Lei L. Mercado, Jerry White, Vijay Sarihan, Tom Lee

IMECE 2002; 523-530https://doi.org/10.1115/IMECE2002-33730

Abstract

View Articletitled, Failure Mechanism Study of Anisotropic Conductive Film (ACF) Packages

PDF

Topics: Absorption , Anisotropy , Delamination , Failure mechanisms , Finite element analysis , Flip-chip , Simulation

Productivity of Parallel-Serial Manufacturing Lines With and Without Crossover

Theodor Freiheit, Moshe Shpitalni, S. Jack Hu

IMECE 2002; 533-540https://doi.org/10.1115/IMECE2002-32846

Abstract

View Articletitled, Productivity of Parallel-Serial Manufacturing Lines With and Without Crossover

PDF

Topics: Manufacturing , Failure , Machining , Polishing equipment , Machinery , Manufacturing systems , Reliability

Module Selection Methodology for Designing Reconfigurable Machining Systems

Li Chen, Fengfeng Xi, Ashish Macwan

IMECE 2002; 541-550https://doi.org/10.1115/IMECE2002-32851

Abstract

View Articletitled, Module Selection Methodology for Designing Reconfigurable Machining Systems

PDF

Topics: Design , Machining

Measurement Scheme Synthesis in Multi-Station Machining Systems

Dragan Djurdjanovic, Jun Ni

IMECE 2002; 551-558https://doi.org/10.1115/IMECE2002-32865

Abstract

View Articletitled, Measurement Scheme Synthesis in Multi-Station Machining Systems

PDF

Topics: Genetic algorithms , Machining

A New Methodology for Sensor Selection in Process Monitoring of Reconfigurable Machining Systems (RmSs)

Mostafa G. Mehrabi, Elijah Kannatey-Asibu, Jr.

IMECE 2002; 559-565https://doi.org/10.1115/IMECE2002-32869

Abstract

View Articletitled, A New Methodology for Sensor Selection in Process Monitoring of Reconfigurable Machining Systems (RmSs)

PDF

Topics: Machining , Process monitoring , Sensors , Monitoring systems , Fuzzy logic , Signal processing , Space , Uncertainty

Capacity Management in Reconfigurable Manufacturing Systems With Stochastic Market Demand

Farshid Maghami Asl, A. Galip Ulsoy

IMECE 2002; 567-574https://doi.org/10.1115/IMECE2002-32872

Abstract

View Articletitled, Capacity Management in Reconfigurable Manufacturing Systems With Stochastic Market Demand

PDF

Topics: Manufacturing systems , Delays

Manufacturing Practices in Dynamic Markets: Reconfigurability to Enable a Service-Based Manufacturing Capacity Supply

Alessandro Urbani, Lorenzo Molinari-Tosatti, Zbigniew J. Pasek

IMECE 2002; 575-582https://doi.org/10.1115/IMECE2002-32876

Abstract

View Articletitled, Manufacturing Practices in Dynamic Markets: Reconfigurability to Enable a Service-Based Manufacturing Capacity Supply

PDF

Topics: Industrial capacity , Manufacturing

The Transformable and Reconfigurable Factory: Strategies, Methods and Case Study

Hans-Peter Wiendahl, Christian Fiebig, Roberto Herna´ndez

IMECE 2002; 583-588https://doi.org/10.1115/IMECE2002-32960

Abstract

View Articletitled, The Transformable and Reconfigurable Factory: Strategies, Methods and Case Study

PDF

Topics: Chain , Manufacturing , Reliability , Turbulence

A Process Management System for Collaborative Manufacturing

Moon Jung Chung, Patrick Kwon, Brian Pentland, Sangchul Kim

IMECE 2002; 589-596https://doi.org/10.1115/IMECE2002-32965

Abstract

View Articletitled, A Process Management System for Collaborative Manufacturing

PDF

Topics: Manufacturing , Process management (Business automation) , Design , Production planning , Collaboration , Manufacturing systems

Machining Process Monitoring and Control: The State–of–the–Art

Steven Y. Liang, Rogelio L. Hecker, Robert G. Landers

IMECE 2002; 599-610https://doi.org/10.1115/IMECE2002-32640

Abstract

View Articletitled, Machining Process Monitoring and Control: The State–of–the–Art

PDF

Topics: Machining , Process monitoring , Control systems , Cycles , Design , Finishes , Hardware , Hinges , Machine tools , Machinery

Materials Handling

Pneumatically Controlled Pallet Conveying and Accumulation System

Mel Beikmann, Jim Kuecker

IMECE 2002; 613-619https://doi.org/10.1115/IMECE2002-33579

Abstract

View Articletitled, Pneumatically Controlled Pallet Conveying and Accumulation System

PDF

Topics: Density , Pallets , Storage

Distributed Palletizing Using a Cam Driven Multi Track Material Handling Device

Stephen J. Derby, John McFadden

IMECE 2002; 621-625https://doi.org/10.1115/IMECE2002-33584

Abstract

View Articletitled, Distributed Palletizing Using a Cam Driven Multi Track Material Handling Device

PDF

Topics: Materials handling , Degrees of freedom , Design , Machinery , Robots , Servomechanisms

Material Handling Throughput Using a Track Based Multihead Robot

Stephen J. Derby, John McFadden

IMECE 2002; 627-632https://doi.org/10.1115/IMECE2002-33590

Abstract

View Articletitled, Material Handling Throughput Using a Track Based Multihead Robot

PDF

Topics: Materials handling , Robots , Control systems , Design , Drive chain , Waves

Material Handling Expansion for a Package Routing Hub

Michael Warber, Charles R. Standridge

IMECE 2002; 633-635https://doi.org/10.1115/IMECE2002-33599

Abstract

View Articletitled, Material Handling Expansion for a Package Routing Hub

PDF

Topics: Conveyor systems , Materials handling , Simulation , Transport packages

Experiences in Modeling, Simulation, and Optimization of Chemical Industry Supply Chains

Charles R. Standridge, David R. Heltne

IMECE 2002; 637-641https://doi.org/10.1115/IMECE2002-33606

Abstract

View Articletitled, Experiences in Modeling, Simulation, and Optimization of Chemical Industry Supply Chains

PDF

Topics: Chemical industry , Modeling , Optimization , Simulation , Supply chains , Logistics , Process industries , Production planning , Simulation models , Rails

All Years

Proceedings Papers

Manufacturing Engineering

Materials Handling

Email alerts

Most Read Proceedings Papers in IMECE

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only