Skip Nav Destination
Proceedings Papers
In This Volume
STLE/ASME 2010 International Joint Tribology Conference
Nanotribology
Effect of Loading and Shear Rate on Tribological Behaviour of Dodecanethiol Self Assembled Monolayer on Au(111): A Molecular Dynamic Simulation Study
IJTC 2010; 5-7https://doi.org/10.1115/IJTC2010-41095
Topics:
Molecular dynamics
,
Self-assembly
,
Shear rate
,
Simulation
,
Tribology
,
Stress
,
Compression
,
Film thickness
,
Fluctuations (Physics)
,
Friction
Clearance Effects on the Impact Behavior of Large Aspect Ratio Silicon Journal Microbearings
IJTC 2010; 21-23https://doi.org/10.1115/IJTC2010-41189
Topics:
Clearances (Engineering)
,
Silicon
,
Bearings
,
Design
,
Impulse (Physics)
,
Journal bearings
,
Metrology
,
Microfabrication
,
Momentum
,
Polysilicon
Biotribology
Effects of Varying Shoe Surface Roughness on COF Between Shoe and Floor Material in the Presence of a Liquid Contaminant
IJTC 2010; 49-51https://doi.org/10.1115/IJTC2010-41179
Topics:
Surface roughness
,
Lubrication
,
Viscosity
,
Water
,
Boundary lubrication
,
Detergents
,
Fluids
,
Friction
,
Accidents
,
Coating processes
Engineered Surfaces
Surface Integrity of Biodegradable Magnesium-Calcium (Mg-Ca) Alloy by Low Plasticity Burnishing
IJTC 2010; 61-63https://doi.org/10.1115/IJTC2010-41214
Topics:
Alloys
,
Biodegradation
,
Magnesium (Metal)
,
Plasticity
,
Residual stresses
,
Surface roughness
,
Biology
,
Biomaterials
,
Bulk solids
,
Deformation
Boundary Lubrication
Analysis of 100 and 700 rpm Cycles in Boundary Lubrication Using Fluorinated Mix Interactions Under Extreme Boundary Lubrication
IJTC 2010; 69-71https://doi.org/10.1115/IJTC2010-41044
Topics:
Boundary lubrication
,
Cycles
,
Wear
,
Design
,
Engines
,
Failure
,
Oils
,
Petroleum
,
Computer software
,
Cylinder tests (Concrete)
Fluid Film Lubrication
A Numerical Study of Friction in Isothermal EHD Rolling-Sliding Sphere-Plane Contacts With Spinning
IJTC 2010; 85-87https://doi.org/10.1115/IJTC2010-41040
Topics:
Friction
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Shear stress
,
Film thickness
,
Finite element methods
,
Finite element model
,
Fluids
,
Heating
,
Pressure
A Reduced Full-System Finite Element Approach to the Solution of EHL Problems: Line Contacts
IJTC 2010; 95-97https://doi.org/10.1115/IJTC2010-41050
Topics:
Finite element analysis
,
Degrees of freedom
,
Elasticity
,
Contact mechanics
,
Deformation
,
Errors
,
Film thickness
,
Resolution (Optics)
,
Stress
Water: An Extraordinary, Ordinary Lubrication Liquid. Influence of Water Salinity, Pressure and Temperature on Water Lubricated Bearings Properties
IJTC 2010; 103-105https://doi.org/10.1115/IJTC2010-41063
Topics:
Bearings
,
Lubrication
,
Pressure
,
Temperature
,
Water
,
Viscosity
,
Seawater
,
Oceans
,
Ships
Ultrasonic Measurement for Film Thickness and Solid Contact in Elastohydrodynamic Lubrication
IJTC 2010; 111-113https://doi.org/10.1115/IJTC2010-41080
Topics:
Elastohydrodynamic lubrication
,
Film thickness
,
Ultrasonic measurement
,
Stiffness
,
Lubrication
,
Reflection
,
Disks
,
Kinematics
,
Lubricants
,
Steel
Piston Ring Cavitation and Starvation During Entrainment Motion Reversal
IJTC 2010; 123-125https://doi.org/10.1115/IJTC2010-41099
Topics:
Cavitation
,
Piston rings
,
Cavities
,
Combustion
,
Diluents
,
Engines
,
Lubrication
,
Thin films
Cavitation Phenomena in Pure-Sliding Grease EHL Films
IJTC 2010; 127-129https://doi.org/10.1115/IJTC2010-41119
Topics:
Cavitation
,
Chemistry
,
Lubricants
,
Lubricating oils
,
Lubrication
,
Machine components
,
Physics
A Dynamic Analysis of a Dual Clearance Squeeze Film Damper
IJTC 2010; 135-136https://doi.org/10.1115/IJTC2010-41139
Topics:
Clearances (Engineering)
,
Dampers
,
Dynamic analysis
,
Algorithms
,
Bearings
,
Dynamic response
,
Machinery
,
Pressure
,
Rotors
Experimental Investigation of the Development of Cavitation in a Squeeze Film Damper
IJTC 2010; 137-139https://doi.org/10.1115/IJTC2010-41144
Topics:
Cavitation
,
Dampers
,
Bubbles
,
Shapes
,
Pressure
,
Whirls
,
Computer simulation
,
Lubricants
,
Sensors
,
Steady state
Controllable Radial Oil Injection Applied to Main Engine Bearings: Hybrid Bearing Configurations and Control Pressure Rules
IJTC 2010; 145-147https://doi.org/10.1115/IJTC2010-41170
Topics:
Bearings
,
Engines
,
Pressure
,
Lubrication
,
Friction
,
Combustion
,
Fluid film lubrication
,
Fluid films
,
Hydrostatics
,
Internal combustion engines
The Magnetohydrodynamic (MHD) Effects on the Performance of a Hydrostatic Thrust Bearing With Hybrid Raleigh Step
IJTC 2010; 161-162https://doi.org/10.1115/IJTC2010-41207
Topics:
Hydrostatics
,
Magnetohydrodynamics
,
Thrust bearings
,
Fluids
,
Pressure
,
Reynolds number
,
Bearings
,
Flow (Dynamics)
,
Jets
,
Magnetic fields
Machine Components Tribology
Influence of Turbocharger Bearing Design on Observed Linear and Nonlinear Vibration
R. Gordon Kirk, Brian Mondschein, Ali A. Alsaeed, Daniel Gallimore, Andy Frank, Jakob Crouch, Matt Tiller, Tu Vo, Kyle Thrush, Robert Lloyd
IJTC 2010; 175-177https://doi.org/10.1115/IJTC2010-41021
Topics:
Bearing design
,
Nonlinear vibration
,
Turbochargers
Behavior of Advanced Space Lubricant Under Impact Load
Nobuyoshi Ohno, Sobahan Mia, Soichiro Nagao, Yoshitaka Tamura, Shigeki Morita, Hiroshi Shiomi, Shingo Obara
IJTC 2010; 183-185https://doi.org/10.1115/IJTC2010-41049
Topics:
Lubricants
,
Stress
,
Film thickness
,
Bearing steel
,
Damage
,
Oils
,
Petroleum
,
Shear rate
,
Steel
,
Viscosity
Simultaneous Film Thickness and Friction Measurement for a Piston Ring-Cylinder Contact
IJTC 2010; 191-193https://doi.org/10.1115/IJTC2010-41081
Topics:
Cylinders
,
Film thickness
,
Friction
,
Pistons
,
Lubricants
,
Stress
,
Viscosity
,
Combustion
,
Engines
,
Lubrication
Experiments on Grease Performance in Aircraft Landing Gear Pin Joints
IJTC 2010; 199-201https://doi.org/10.1115/IJTC2010-41101
Topics:
Aircraft
,
Gears
,
Torque
,
Friction
,
Lubrication
,
Cycles
,
Machinery
,
Stress
,
Actuators
,
Displacement
Transient Thermal Lubrication Analysis of Involute Gear
IJTC 2010; 203-205https://doi.org/10.1115/IJTC2010-41113
Topics:
Gears
,
Lubrication
,
Transients (Dynamics)
,
Temperature effects
,
Cycles
,
Machinery
,
Spur gears
Cage Instabilities in High-Speed Cylindrical Roller Bearings
IJTC 2010; 207-209https://doi.org/10.1115/IJTC2010-41118
Topics:
Roller bearings
,
Whirls
,
Bearings
,
Clearances (Engineering)
,
Stress
,
Dynamic models
,
Geometry
,
Lubrication
,
Rollers
Surface Damage Under Extreme Conditions Existed in Aircraft Bearings
IJTC 2010; 215-217https://doi.org/10.1115/IJTC2010-41127
Topics:
Aircraft
,
Bearings
,
Damage
,
Aircraft engines
,
Bearing steel
,
Disks
,
Fatigue
,
Fracture (Materials)
,
Oxidation
,
Stress
A 3D Finite Element Study on the Friction Effects on Material Flow Under the Cutting Edge in Superfinish Hard Milling H13 Tool Steel
IJTC 2010; 235-237https://doi.org/10.1115/IJTC2010-41215
Topics:
Cutting
,
Finite element analysis
,
Flow (Dynamics)
,
Friction
,
Milling
,
Tool steel
,
Stress
,
Temperature
,
Deformation
,
Geometry
The Effects of PVD Coated Tool Flank Wear and Process Parameters on Surface Integrity in Hard Milling AISI H13 Steel
IJTC 2010; 239-241https://doi.org/10.1115/IJTC2010-41216
Topics:
Milling
,
Steel
,
Wear
,
Machining
,
Computer numerical control machine tools
,
Cutting
,
Cutting tools
,
Friction
,
Inspection
,
Machining centers
Coupling of Two EHL-Lubricated Contacts in Gear Dynamics
IJTC 2010; 247-249https://doi.org/10.1115/IJTC2010-41237
Topics:
Dynamics (Mechanics)
,
Gears
,
Lubrication
,
Spur gears
,
Transients (Dynamics)
,
Equations of motion
,
Fluids
,
Stress
,
Vibration
Tribological Characterization of Polymeric Sealing Materials in High Pressure Hydrogen Gas
Yoshinori Sawae, Kanao Fukuda, Eiichi Miyakoshi, Shunichiro Doi, Hideki Watanabe, Kazuhiro Nakashima, Joich Sugimura
IJTC 2010; 251-253https://doi.org/10.1115/IJTC2010-41238
Topics:
High pressure (Physics)
,
Hydrogen
,
Sealants
,
Tribology
,
Friction
,
Disks
,
Helium
,
Stainless steel
,
Bearings
,
Composite materials
Lubricant Effects in Hydraulic Motor Starting Efficiency
IJTC 2010; 259-261https://doi.org/10.1115/IJTC2010-41262
Topics:
Hydraulic motors
,
Lubricants
,
Fluids
,
Friction
,
Motors
,
Pistons
,
Pressure
,
Viscosity
,
Displacement
,
Engine design
Studies on Friction and Transfer Layer Formation When Pure Magnesium Pins Slid at Various Numbers of Cycles on Steel Plates of Different Surface Texture
IJTC 2010; 263-265https://doi.org/10.1115/IJTC2010-41284
Topics:
Cycles
,
Friction
,
Magnesium (Metal)
,
Pins (Engineering)
,
Plates (structures)
,
Steel
,
Surface texture
,
Texture (Materials)
,
Stick-slip
,
Lubrication
Influence of Friction and Rake Angle on the Formation of Discontinuous Rock Fragments During Rock Cutting
IJTC 2010; 271-273https://doi.org/10.1115/IJTC2010-41286
Topics:
Cutting
,
Friction
,
Rocks
,
Cutting tools
,
Computer simulation
,
Damage
,
Drilling
,
Engineering simulation
,
Finite element analysis
,
Finite element model
A Brief Overview on High Temperature Friction and Wear
IJTC 2010; 275-278https://doi.org/10.1115/IJTC2010-41297
Topics:
Friction
,
High temperature
,
Wear
,
Temperature
,
Oxidation
,
Alloys
,
Coatings
,
Compression
,
Engines
,
Firing
Contact Mechanics
A Numerical Solution for Fretting Contacts
IJTC 2010; 289-291https://doi.org/10.1115/IJTC2010-41041
Topics:
Algorithms
,
Contact mechanics
,
Cycles
,
Displacement
,
Fast Fourier transforms
,
Gradient methods
,
Pressure
,
Shear (Mechanics)
,
Stability
,
Stress
Coupling System Dynamics and Contact Behaviour by Numerical Modelling at Different Scales
IJTC 2010; 293-295https://doi.org/10.1115/IJTC2010-41055
Topics:
Modeling
,
System dynamics
,
Wear
,
Tribology
,
Dynamic response
,
Friction
,
Boundary-value problems
,
Brakes
,
Computer simulation
,
Contact mechanics
Numerical Method of Analyzing Contact Mechanics Between a Sphere and a Flat Considering Lennard-Jones Surface Forces of Contacting Asperities and Mean Height Surfaces
IJTC 2010; 301-303https://doi.org/10.1115/IJTC2010-41066
Topics:
Contact mechanics
,
Numerical analysis
,
Surface roughness
,
Adhesion
,
Deformation
,
Density
,
Disks
,
Glass
,
Relaxation (Physics)
Contact Mechanics in Low Plasticity Burnishing of Biomedical Magnesium-Calcium Alloy
IJTC 2010; 349-351https://doi.org/10.1115/IJTC2010-41213
Topics:
Alloys
,
Biomedicine
,
Contact mechanics
,
Magnesium (Metal)
,
Plasticity
,
Manufacturing
,
Orthopedics
,
Acoustic emissions
,
Biodegradation
,
Biomaterials
Magnetic Storage Tribology Track and Symposium
Slider Dynamics Over a Discrete Track Medium With Servo Patterns
IJTC 2010; 373-375https://doi.org/10.1115/IJTC2010-41029
Topics:
Dynamics (Mechanics)
,
Servomechanisms
,
Air flow
,
Design
,
Disks
,
Synchronization
Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head Under Ultra Thin Spacing
IJTC 2010; 377-379https://doi.org/10.1115/IJTC2010-41052
Topics:
Magnetic heads
,
Numerical analysis
,
Air bearings
,
Algorithms
,
Bearings
,
Damping
,
Film thickness
,
Finite difference methods
,
Pressure
,
Stiffness
Effect of Spinning Disk–Parking Ramp Collison on the Operational Shock Performance of a Mobile Hard Disk Drive
IJTC 2010; 389-391https://doi.org/10.1115/IJTC2010-41149
Topics:
Disks
,
Rotating disks
,
Shock (Mechanics)
,
Excitation
,
Failure
,
Horizontal directional drilling
,
Air bearings
,
Collisions (Physics)
,
Computers
,
Design
Nanomechanical and Friction Properties of Ultrathin Amorphous Carbon Films Studied by Molecular Dynamics Analysis
IJTC 2010; 393-395https://doi.org/10.1115/IJTC2010-41222
Topics:
Carbon films
,
Friction
,
Molecular dynamics
,
Carbon
,
Disks
,
Tribology
,
Atoms
,
Corrosion
,
Density
,
Engineering simulation
Wind Energy Tribology
Predicting Micro-Pitting Occurrence in Wind Turbine Gearbox Roller Bearings
IJTC 2010; 401-406https://doi.org/10.1115/IJTC2010-41136
Topics:
Mechanical drives
,
Roller bearings
,
Wind turbines
,
Bearings
,
Damage
,
Fatigue life
,
Film thickness
,
Lubricants
,
Risk
,
Rollers
Roller-Raceway Slip Simulations of Wind Turbine Gearbox Bearings Using Dynamic Bearing Model
IJTC 2010; 407-409https://doi.org/10.1115/IJTC2010-41191
Topics:
Bearings
,
Engineering simulation
,
Mechanical drives
,
Rollers
,
Simulation
,
Wind turbines
,
Stress
,
Clearances (Engineering)
,
Degrees of freedom
,
Roller bearings
Leon Keer Symposium
A Discrete Dislocation Plasticity Analysis of Plane-Strain Indentation of a Single-Crystal Half-Space by a Smooth and a Rough Rigid Asperity
IJTC 2010; 415-417https://doi.org/10.1115/IJTC2010-41155
Topics:
Crystals
,
Dislocations
,
Plane strain
,
Plasticity
,
Surface roughness
,
Stress
,
Fractals
,
Deformation
,
Density
,
Dislocation density
Effects of the Presence of Multiple Spherical Inclusions Within an Elastic Half-Space in a Circular Point Contact
IJTC 2010; 423-426https://doi.org/10.1115/IJTC2010-41160
Topics:
Algorithms
,
Computation
,
Contact mechanics
,
Elastic half space
,
Finite element methods
,
Poisson ratio
,
Pressure
,
Stress
,
Young's modulus
Simulation of Wet Clutch Engagement on Electronically-Controlled Limited-Slip Differential (LSD) With Consideration of Degraded Clutch Performance
IJTC 2010; 431-433https://doi.org/10.1115/IJTC2010-41265
Topics:
Simulation
,
Friction
,
Friction materials
,
Lubrication
,
Equations of motion
,
Heat
,
Oxidation
,
Simulation results
,
Vehicles
Environmental Tribology Symposium (Co-Sponsored by the Chinese Tribology Institution (CTI))
Towards the “Green Tribology”: Biomimetic Surfaces, Biodegradable Lubrication, and Renewable Energy
IJTC 2010; 435-437https://doi.org/10.1115/IJTC2010-41157
Topics:
Biodegradation
,
Biomimetics
,
Lubrication
,
Renewable energy
,
Tribology
,
Modeling
,
Engineering disciplines
,
Lubricants
,
Sustainability
The Film Formation Mechanism of High Water-Based Emulsions
IJTC 2010; 439-441https://doi.org/10.1115/IJTC2010-41283
Topics:
Emulsions
,
Water
,
Cutting
,
Lubricants
,
Metals
,
Metalworking
,
Polishing
,
Steel
The Particle Tribology Symposium
Debris Contamination in Sliding Contacts
IJTC 2010; 453-455https://doi.org/10.1115/IJTC2010-41306
Topics:
Contamination
,
Gears
,
Lubricants
,
Manufacturing
,
Particle size
,
Particulate matter
,
Sands
,
Silicon
,
Steel
,
Wear
An Investigation of Wear Mechanisms for Transfer Films in an In Situ Self-Replenishing Tribosystem
IJTC 2010; 457-459https://doi.org/10.1115/IJTC2010-41307
Topics:
Wear
,
Atomic force microscopy
,
Lubrication
,
Approximation
,
Flow (Dynamics)
,
Friction
,
Lubricants
,
Modeling
,
Solids
,
Thick films