Skip Nav Destination
Proceedings Papers
Part B: Magnetic Storage Tribology; Manufacturing/Metalworking Tribology; Nanotribology; Engineered Surfaces; Biotribology; Emerging Technologies; Special Symposia on Contact Mechanics; Special Symposium on Nanotribology
Magnetic Storage Tribology
Effects of Molecularly Thin Liquid Lubricant Films on Slider Hysteresis Behavior in Hard Disk Drives
IJTC 2006; 833-841https://doi.org/10.1115/IJTC2006-12062
Topics:
Disks
,
Lubricants
,
Film thickness
,
Diluents
,
Density
,
Design
,
Engineering simulation
,
Friction
,
Intermolecular forces
,
Magnetic recording
Quantification of the Surface Morphology of Lubricant Films With Polar End Groups Using Molecular Dynamics Simulation: Periodic Changes in Morphology Depending on Film Thickness
IJTC 2006; 875-884https://doi.org/10.1115/IJTC2006-12106
Topics:
Film thickness
,
Lubricants
,
Molecular dynamics simulation
,
Disks
,
Intermolecular forces
,
Polymers
,
Probes
,
Springs
,
Surface roughness
Contact Induced Off-Track Vibrations of Air Bearing-Slider-Suspension System in Hard Disk Drives
IJTC 2006; 891-898https://doi.org/10.1115/IJTC2006-12193
Topics:
Bearings
,
Disks
,
Vibration
,
Air bearings
,
Manufacturing
,
Friction
,
Dynamics (Mechanics)
,
Finite element analysis
,
Lubrication
,
Shear (Mechanics)
Modeling of the Effect of Preferential Texturing on the Interfacial Forces in Sub-5 nm Ultra-Low Flying Head-Disk Interfaces
IJTC 2006; 899-908https://doi.org/10.1115/IJTC2006-12234
Topics:
Disks
,
Modeling
,
Approximation
,
Surface roughness
,
Adhesives
,
Air bearings
,
Density
,
Etching
,
Friction
,
Interface phenomena
Properties of Evaporated Phosphazene Lubricants on a Carbon Surface
Nang T. Tran, Todd L. Ethen, Chris Merton, Timo E. Mahonen, Jixiong Han, Benjamin M. DeKoven, Donald A. Perettie
IJTC 2006; 911-915https://doi.org/10.1115/IJTC2006-12368
Topics:
Carbon
,
Lubricants
,
Coating processes
,
Coatings
,
Vacuum equipment
,
Corrosion protection
,
Diamonds
,
Disks
,
Evaporation
,
Hydrogen
Manufacturing/Metalworking Tribology
A Finite Element Study on the Influence of Residual Stress Profiles on Sliding Contact of Precision Machined Components
IJTC 2006; 949-957https://doi.org/10.1115/IJTC2006-12221
Topics:
Finite element analysis
,
Stress
,
Friction
,
Machining
,
Contact mechanics
,
Design
,
Grinding
,
Pressure
,
Residual stresses
,
Shear (Mechanics)
A Model for Studying the Hydrodynamic Slurry Behavior in CMP: Discrete and Continuous Phases
IJTC 2006; 959-969https://doi.org/10.1115/IJTC2006-12229
Topics:
Slurries
,
Particulate matter
,
Polishing
,
Semiconductor wafers
,
Fluids
,
Kinematics
,
Manufacturing
,
Pressing
,
Shear (Mechanics)
,
Simulation
On Some Tribological Effects in Machining of Compacted Graphite Iron (CGI)
IJTC 2006; 971-980https://doi.org/10.1115/IJTC2006-12232
Topics:
Cast iron
,
Machining
,
Tribology
,
Cutting
,
Cermets
,
Lubrication
,
Aluminum
,
Ceramics
,
Coating processes
,
Coatings
Some Tribological Aspects of Thin Film Copper During CMP
IJTC 2006; 987-996https://doi.org/10.1115/IJTC2006-12307
Topics:
Copper
,
Thin films
,
Tribology
,
Polishing
,
Temperature
,
Friction
,
Mechanical properties
,
Slurries
,
Pressure
,
Work hardening
Nanotribology
The Effects of Annealing Treatment on the Nano-Mechanical Properties and Nano-Tribological Behaviors of Nitrogen-Doped Diamond-Like Carbon (DLC) Coatings
IJTC 2006; 1007-1013https://doi.org/10.1115/IJTC2006-12143
Topics:
Annealing
,
Carbon
,
Coatings
,
Diamond films
,
Diamonds
,
Nitrogen
,
Temperature
,
Tribology
The Structure and Sliding Friction of Diamond-Like Carbon Surfaces From Molecular Dynamics Simulations
Qing Zhang, Adri C. T. Van Duin, Tahir Cagin, William A. Goddard, III, J. M. Martin, M. I. De Barros-Bouchet, T. Le Mogne, Takumaru Sagawa, Sachiko Okuda
IJTC 2006; 1043-1052https://doi.org/10.1115/IJTC2006-12214
Topics:
Carbon
,
Diamonds
,
Friction
,
Molecular dynamics simulation
,
Sliding friction
,
Atoms
,
Adhesion
,
Simulation
,
Water
,
Boundary lubrication
Engineered Surfaces
Laser Glazing Process Development and Optimization for Railroad Applications
IJTC 2006; 1081-1107https://doi.org/10.1115/IJTC2006-12095
Topics:
Lasers
,
Optimization
,
Railroads
,
Rails
,
Friction
,
Wheels
,
Fuels
,
Gages
,
Lubricants
,
Trains
Full Scale Friction and Durability Testing of Laser Glazed Rail
IJTC 2006; 1109-1144https://doi.org/10.1115/IJTC2006-12096
Topics:
Durability
,
Friction
,
Lasers
,
Rails
,
Testing
,
Adhesion
,
Wheels
,
Cracking (Materials)
,
Energy dissipation
,
Force measurement
Effects of Applied Potential on Friction of a PVDF Micro Gripper
IJTC 2006; 1145-1152https://doi.org/10.1115/IJTC2006-12138
Topics:
Friction
,
Grippers
,
Design
,
Microassembling
,
Micromanipulation
,
Polymers
,
Surgery
Adhesion and Friction Studies of Silicon Surfaces Processed Using a Microparticle-Based Method
IJTC 2006; 1163-1167https://doi.org/10.1115/IJTC2006-12159
Topics:
Adhesion
,
Friction
,
Microparticles
,
Silicon
,
Dry etching
,
Elastic moduli
,
Microscale devices
,
Probes
,
Size effect
,
Thermoplastic rubber
Experimental Methods Using Scale-Sensitive, Geometric Analysis of Surface Textures for Tribology
IJTC 2006; 1183-1184https://doi.org/10.1115/IJTC2006-12233
Topics:
Experimental methods
,
Surface texture
,
Tribology
,
Texture (Materials)
,
Metrology
,
Regression analysis
,
Surface roughness
,
Testing
Mechanical, Microstructural and Tribological Properties of Low-Surface Energy DLC Coatings
IJTC 2006; 1187-1189https://doi.org/10.1115/IJTC2006-12361
Topics:
Diamond films
,
Tribology
,
Surface energy
,
Atomic force microscopy
,
Coatings
,
Carbon
,
Disks
,
Friction
,
Mechanical properties
,
Nanoindentation
DLC Coating by Triboadhesion on a Shaft and Its Effect on the Pressure Distribution and Dynamic Response in a Tilting Pad Bearing
Jose´ Mari´a Rodri´guez Lelis, Dagoberto Vela Arvizo, Arturo Abundez Pilego, Sergio Reyes Galindo, Jose Navarro Torres, Gilberto Pin˜a Pin˜a
IJTC 2006; 1191-1192https://doi.org/10.1115/IJTC2006-12362
Topics:
Bearings
,
Diamond films
,
Dynamic response
,
Pressure
Biotribology
Lubrication and Wear of Artificial Knee Joint Materials in a Rolling/Sliding Tribotester
IJTC 2006; 1193-1202https://doi.org/10.1115/IJTC2006-12133
Topics:
Knee joint prostheses
,
Lubrication
,
Tribotesters
,
Wear
,
Cycles
,
Oscillations
,
Alloys
,
Approximation
,
Bearings
,
Cobalt
The Effect of Protein Adsorption on the Friction Behavior of Ultra-High Molecular Weight Polyethylene
IJTC 2006; 1203-1209https://doi.org/10.1115/IJTC2006-12164
Topics:
Friction
,
Molecular weight
,
Proteins
,
Atomic force microscopy
,
Fluids
,
Physiology
,
Shear strength
,
Surface energy
,
Arthroplasty
,
Biomedicine
Pedestrian Slips Caused by Particle Contamination
IJTC 2006; 1211-1212https://doi.org/10.1115/IJTC2006-12359
Topics:
Contamination
,
Particulate matter
,
Friction
,
Lubrication
,
Accidents
,
Adhesives
,
Die cutting
,
Particle size
,
Pendulums
,
Shapes
Emerging Technologies/Other
Rotordynamics of Small Turbochargers Supported on Floating Ring Bearings: Highlights in Bearing Analysis and Experimental Validation
IJTC 2006; 1213-1220https://doi.org/10.1115/IJTC2006-12001
Topics:
Bearings
,
Rotordynamics
,
Turbochargers
,
Lubricants
,
Whirls
,
Engineering prototypes
,
Internal combustion engines
,
Limit cycles
,
Lubrication
,
Temperature
Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation
IJTC 2006; 1221-1230https://doi.org/10.1115/IJTC2006-12026
Topics:
Bending (Stress)
,
Gas bearings
,
Bearings
,
Rotors
,
Damping
,
Flow (Dynamics)
,
Friction
,
Turbochargers
,
Turbomachinery
,
Cycles
Foil Gas Bearing With Compression Springs: Analyses and Experiments
IJTC 2006; 1291-1302https://doi.org/10.1115/IJTC2006-12160
Topics:
Compression
,
Gas bearings
,
Springs
,
Bearings
,
Stiffness
,
Stress
,
Cooling
,
Damping
,
Engineering simulation
,
Foil bearings
High-Speed Operation of a Gas-Bearing Supported MEMS Air Turbine
C. J. Teo, L. X. Liu, H. Q. Li, L. C. Ho, S. A. Jacobson, F. F. Ehrich, A. H. Epstein, Z. S. Spakovszky
IJTC 2006; 1303-1314https://doi.org/10.1115/IJTC2006-12173
Topics:
Gas bearings
,
Microelectromechanical systems
,
Turbines
,
Bearings
,
Rotors
,
Geometry
,
Anisotropy
,
Journal bearings
,
Leakage flows
,
Machinery
Granular Flows in an Annular Shear Cell With Varying Roughness: Experiments and Modeling
IJTC 2006; 1337-1343https://doi.org/10.1115/IJTC2006-12220
Topics:
Flow (Dynamics)
,
Modeling
,
Shear (Mechanics)
,
Surface roughness
,
Lubrication
,
Boundary-value problems
,
Fluids
,
Geometry
,
Particulate matter
,
Transparency
Evaluation of Coatings for a Large Hybrid Foil/Magnetic Bearing
IJTC 2006; 1361-1362https://doi.org/10.1115/IJTC2006-12328
Topics:
Coatings
,
Magnetic bearings
,
Bearings
,
Temperature
,
Tribology
,
Cycles
,
Foil bearings
,
Reliability
,
Rolling bearings
,
Transients (Dynamics)
Investigation Fields of DEM Wear Simulation
IJTC 2006; 1363-1364https://doi.org/10.1115/IJTC2006-12329
Topics:
Discrete element methods
,
Simulation
,
Wear
,
Particulate matter
,
Abrasion
,
Adhesion
,
Corrosion
,
Design
,
Fatigue
,
Lubrication
Transient Thermal Investigation of Dry Sliding Friction at a Polymer-Metal Interface
IJTC 2006; 1365-1366https://doi.org/10.1115/IJTC2006-12334
Topics:
Metals
,
Polymers
,
Sliding friction
,
Transients (Dynamics)
,
Friction
,
Temperature
,
Tribology
,
Tribometers
,
Aluminum
,
Ceramics
An Analytic Approach to the Foil Gas Bearing Performance Map
IJTC 2006; 1369-1373https://doi.org/10.1115/IJTC2006-12364
Topics:
Gas bearings
,
Bearings
,
Journal bearings
,
Stress
,
Testing
,
Tribology
,
Turbomachinery
,
Coatings
,
Computers
,
Conceptual design
Special Symposia on Contact Mechanics
Interrelationship Between Hardness and Resistivity of Metal Alloy Films as Contact Materials in MEMS Switches
IJTC 2006; 1377-1378https://doi.org/10.1115/IJTC2006-12268
Topics:
Alloys
,
Electrical resistivity
,
Microelectromechanical systems
,
Switches
,
Metals
,
Platinum
,
Ruthenium
,
Thin films
,
Adhesion
,
Contact resistance
Modeling of the Rolling and Sliding Contact Between Two Asperities: Part II — Hemispherical Sliding Contact
IJTC 2006; 1391-1397https://doi.org/10.1115/IJTC2006-12274
Topics:
Algorithms
,
Deformation
,
Displacement
,
Finite element methods
,
Finite element model
,
Hardening
,
Modeling
,
Nanoindentation
,
Simulation
,
Stress
Elastic-Plastic Spherical Contact Under Combined Normal and Tangential Loading
IJTC 2006; 1415-1416https://doi.org/10.1115/IJTC2006-12281
Topics:
Tangential loading
,
Junctions
,
Stiction
,
Stress
,
Adhesives
,
Deformation
,
Modeling
Effect of Heat Input Modeling on TIG Welding Thermo-Mechanical Fields
IJTC 2006; 1425-1427https://doi.org/10.1115/IJTC2006-12286
Topics:
Gas tungsten arc welding
,
Heat
,
Modeling
,
Thermomechanics
,
Heat flux
,
Density
,
Gaussian distribution
,
Shapes
,
Simulation
,
Steady state
Transitions in Contact Resistance Between a Pin and Flat During Sliding at High Current Densities
IJTC 2006; 1499-1502https://doi.org/10.1115/IJTC2006-12304
Topics:
Contact resistance
,
Electric current
,
Friction
,
Linear motors
,
Maintenance
,
Optical microscopy
,
Pneumatic actuators
,
Railroad passenger cars
,
Rails
,
Stress
An Analysis of Elasto-Plastic Sliding Spherical Asperity Interaction
IJTC 2006; 1517-1518https://doi.org/10.1115/IJTC2006-12352
Topics:
Adhesives
,
Deformation
,
Elastic moduli
,
Finite element analysis
,
Friction
,
Metals
,
Simulation
,
Stress
,
Yield strength