Skip Nav Destination
Proceedings Papers
In This Volume
Volume 10: 2017 ASME International Power Transmission and Gearing Conference
2017 ASME International Power Transmission and Gearing Conference
Gear Analysis, Materials, Fatigue
The Effect of Spur Gear Tribo-Dynamic Response on Pitting Crack Nucleation
IDETC-CIE 2017; V010T11A001https://doi.org/10.1115/DETC2017-67003
Topics:
Fracture (Materials)
,
Nucleation (Physics)
,
Spur gears
,
Stress
,
Dynamics (Mechanics)
,
Fatigue
,
Gears
,
Damping
,
Elastohydrodynamic lubrication
,
Excitation
A Numerical Approach to the Calculation of the Surface Temperature Distribution of Worm Gears
IDETC-CIE 2017; V010T11A002https://doi.org/10.1115/DETC2017-67049
Topics:
Temperature distribution
,
Worm gears
,
Simulation models
,
Temperature
,
Boundary-value problems
,
Computer simulation
,
Heat
,
Stress
Hypoid Gear Design Beyond Conventional Approach
IDETC-CIE 2017; V010T11A003https://doi.org/10.1115/DETC2017-67080
Topics:
Design
,
Spiral bevel gears
,
Gears
,
Vehicles
,
Product development
,
Cycles
,
Displacement
,
Failure mechanisms
,
Gear teeth
,
Machinery
Measurement and Control Software for Transmission Error of Bevel Gear Pair
IDETC-CIE 2017; V010T11A004https://doi.org/10.1115/DETC2017-67176
Topics:
Bevel gears
,
Computer software
,
Errors
,
Algorithms
,
Composite materials
,
Data acquisition
,
Gears
,
Statistical analysis
,
Statistical process control
,
Testing
Differential Gear Bending Stresses in Presence of Misalignments and Runout
IDETC-CIE 2017; V010T11A005https://doi.org/10.1115/DETC2017-67191
Topics:
Bending (Stress)
,
Differential gears
,
Gears
,
Stress
,
Design
,
Errors
,
Failure
,
Fatigue failure
,
Indexing (Machining)
,
Lubrication
A Fast Finite Element Based Methodology to Predict the Temperature Field in a Thermoplastic Spur Gear Drive
IDETC-CIE 2017; V010T11A006https://doi.org/10.1115/DETC2017-67724
Topics:
Finite element analysis
,
Spur gears
,
Temperature
,
Gears
,
Friction
,
Heating
,
Plastic gears
,
Design
,
Error functions
,
Finite element model
Gear Tooth Bending Fatigue Life Prediction Using Integrated Computational Material Engineering
Michael E. Oja, Carlos H. Wink, Nikhil Deo, Robert L. McDaniels, Robert G. Tryon, Animesh Dey, Sanjeev M. Kulkarni
IDETC-CIE 2017; V010T11A007https://doi.org/10.1115/DETC2017-67911
Topics:
Computational methods
,
Computer software
,
Damage
,
Fatigue
,
Fatigue life
,
Gear teeth
,
Gears
,
Materials science
,
Steel
,
Testing
A Load Distribution Model for Planetary Gear Sets
IDETC-CIE 2017; V010T11A008https://doi.org/10.1115/DETC2017-68354
Topics:
Planetary gears
,
Stress
,
Gears
,
Errors
,
Manufacturing
,
Design
,
Kinematics
Gear Dynamics and Noise
Effect of Track Geometric Irregularity on Dynamic Characteristics of Gear Transmission in a Locomotive
IDETC-CIE 2017; V010T11A009https://doi.org/10.1115/DETC2017-67034
Topics:
Gears
,
Locomotives
,
Dynamic response
,
Dynamics (Mechanics)
,
Braking
,
Dynamic models
,
Engines
,
Event history analysis
,
Excitation
,
Fatigue life
Calculation of Time-Varying Mesh Stiffness Affected by Load Based on FEM
IDETC-CIE 2017; V010T11A010https://doi.org/10.1115/DETC2017-67043
Topics:
Finite element methods
,
Finite element model
,
Stiffness
,
Stress
,
Gears
,
Dynamic response
,
Machinery
,
Numerical analysis
Vibration Characteristics of Friction Plate of a 6-Speed Planetary Gear Train Base on Multi-Body Dynamic Model
IDETC-CIE 2017; V010T11A011https://doi.org/10.1115/DETC2017-67045
Topics:
Dynamic models
,
Friction
,
Planetary gears
,
Trains
,
Vibration
,
Damage
,
Fracture (Materials)
,
Fracture (Process)
,
Plates (structures)
,
Automotive transmissions
Optimal Rib Layout Design of Gearbox for the Reduction of Radiated Noise
IDETC-CIE 2017; V010T11A012https://doi.org/10.1115/DETC2017-67054
Topics:
Design
,
Mechanical drives
,
Noise (Sound)
,
Acoustics
,
Optimization
,
Topology
,
Sound pressure
,
Boundary element methods
,
Finite element methods
,
Noise control
Dynamic Transmission Accuracy Analysis of an RV Reducer Rigid-Flexible Coupled Effect
IDETC-CIE 2017; V010T11A013https://doi.org/10.1115/DETC2017-67063
Topics:
Deformation
,
Errors
,
Gears
,
Manufacturing
,
Modeling
,
Multibody dynamics
,
Optimization
,
Planetary gears
,
Sensitivity analysis
,
Stress
A Method for the Optimal Design of Split Ring Dampers for Aviation Gears
IDETC-CIE 2017; V010T11A014https://doi.org/10.1115/DETC2017-67231
Topics:
Aviation
,
Dampers
,
Design
,
Gears
,
Vibration
,
Bevel gears
,
Damping
,
Centrifugal force
,
Cycles
,
Dynamic response
Reduction of Vibration in Spur Gears by an Asymmetric Tooth Profile With High Contact Ratio
IDETC-CIE 2017; V010T11A015https://doi.org/10.1115/DETC2017-67256
Topics:
Spur gears
,
Vibration
,
Gears
,
Noise (Sound)
,
Mechanical drives
,
Stiffness
,
Cycles
,
Helical gears
,
Machinery
,
Thrust
Coupled Dynamic Characteristics of Wind Turbine Gearbox Driven by Ring Gear Considering Gravity
IDETC-CIE 2017; V010T11A016https://doi.org/10.1115/DETC2017-67305
Topics:
Gears
,
Gravity (Force)
,
Mechanical drives
,
Wind turbines
,
Vibration
,
Excitation
,
Stress
,
Dynamic modeling
,
Dynamic models
,
Dynamic response
Dynamic Transmission Error Measurements From Spur Gear Pairs Having Tooth Indexing Errors
IDETC-CIE 2017; V010T11A017https://doi.org/10.1115/DETC2017-67314
Topics:
Errors
,
Indexing (Machining)
,
Spur gears
,
Gears
,
Transients (Dynamics)
,
Accelerometers
,
Dynamic response
,
Measurement systems
,
Resonance
Analysis of the Housing Vibration of a Rotorcraft Planetary Gear Using a Finite Element/Contact Mechanics Model
IDETC-CIE 2017; V010T11A018https://doi.org/10.1115/DETC2017-67984
Topics:
Contact mechanics
,
Finite element analysis
,
Planetary gears
,
Vibration
,
Errors
,
Manufacturing
,
Spectra (Spectroscopy)
,
Accelerometers
,
Damage
,
Deflection
Gear Whine Analysis of an Integrated-Spring Split Gear System
IDETC-CIE 2017; V010T11A019https://doi.org/10.1115/DETC2017-68245
Topics:
Gears
,
Springs
,
Combustion
,
Engines
,
Noise (Sound)
,
Boundary-value problems
,
Engineering simulation
,
Gear teeth
,
Geometry
,
Modeling
Study the Effects From Gear Rim Thickness on the Gear Pair Time-Varying Mesh Stiffness and Dynamic Behaviors
IDETC-CIE 2017; V010T11A020https://doi.org/10.1115/DETC2017-68421
Topics:
Gears
,
Stiffness
,
Deformation
,
Elasticity
,
Potential energy
,
Contact mechanics
,
Cycles
,
Deflection
,
Design
,
Finite element analysis
Simulation of Planetary Gears With Pitting Under Dynamic Conditions
IDETC-CIE 2017; V010T11A021https://doi.org/10.1115/DETC2017-68515
Topics:
Damage
,
Dynamic response
,
Dynamics (Mechanics)
,
Gear teeth
,
Planetary gears
,
Resonance
,
Simulation
Gear Geometry
Research on a Generating Method of Spiral Flutes of Hourglass Worm Gear Hob
IDETC-CIE 2017; V010T11A023https://doi.org/10.1115/DETC2017-67053
Topics:
Worm gears
,
Cutting
,
Screw threads
,
Thread
,
Milling
,
Machining
,
Shapes
,
Virtual assembly
Mathematical Modeling and Dynamic Contact Analysis of Beveloid Gear Pairs in Marine Gearbox With Small Shaft Angle
IDETC-CIE 2017; V010T11A024https://doi.org/10.1115/DETC2017-67073
Topics:
Gears
,
Mechanical drives
,
Modeling
,
Geometry
,
Errors
,
Finite element analysis
,
Finite element model
,
Manufacturing
,
Solid models
,
Stress concentration
Research on Calculation of Unloaded Transmission Error of Planetary Gear Train Caused by Eccentricity
IDETC-CIE 2017; V010T11A025https://doi.org/10.1115/DETC2017-67463
Topics:
Errors
,
Planetary gears
,
Trains
,
Gears
,
Stress
,
Curve fitting
,
Gear trains
,
Simulation
Comparison of Cyclo-Palloid and Cyclo-Cut Cutting Methods for Generation of Spiral Bevel Gears
IDETC-CIE 2017; V010T11A026https://doi.org/10.1115/DETC2017-67793
Topics:
Cutting
,
Spiral bevel gears
,
Bearings
,
Gears
Optimization of Hypoid Gear Design and Tooth Contact Analysis
IDETC-CIE 2017; V010T11A028https://doi.org/10.1115/DETC2017-68407
Topics:
Design
,
Optimization
,
Spiral bevel gears
,
Errors
,
Stress
,
Particle swarm optimization
,
Algorithms
,
Computer software
Gear Manufacturing
Study on the Pitch Error in the Initial Stage of Gear Rolling Process
IDETC-CIE 2017; V010T11A029https://doi.org/10.1115/DETC2017-67048
Topics:
Errors
,
Gears
,
Fatigue life
,
Synchronization
Application of Audible Sound Signals for Tool Wear Monitoring and Workpiece Hardness Identification in Gear Milling Using Machine Learning Techniques
IDETC-CIE 2017; V010T11A030https://doi.org/10.1115/DETC2017-68067
Topics:
Gears
,
Machine learning
,
Milling
,
Signals
,
Wear
,
Cutting
,
Cutting tools
,
Machining
,
Support vector machines
,
Algorithms
Gearbox Design, Reliability, and Diagnostics
A Method to Determine Grinding Wheel Profiles for Manufacturing Threads in Planetary Roller Screw Mechanism
IDETC-CIE 2017; V010T11A031https://doi.org/10.1115/DETC2017-67012
Topics:
Grinding wheels
,
Manufacturing
,
Rollers
,
Screws
,
Thread
,
Gears
,
Grinding
,
Machining
Investigation on the Lubrication Performances and Thermal Characteristics of the Tapered Roller Bearing
IDETC-CIE 2017; V010T11A032https://doi.org/10.1115/DETC2017-67052
Topics:
Lubrication
,
Tapered roller bearings
,
Bearings
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Heat
,
Heat transfer
,
Abrasion
,
Computer software
,
Failure
Numerical Investigation on Influence Factors of Radiation Noise of the Bridge Crane Helical Gear Reducer
IDETC-CIE 2017; V010T11A034https://doi.org/10.1115/DETC2017-67076
Topics:
Gantry cranes
,
Helical gears
,
Noise (Sound)
,
Radiation (Physics)
,
Mechanical drives
,
Excitation
,
Gears
,
Computer software
,
Dynamic response
,
Sound pressure
Lubrication and Efficiency
A Study on the Influence of Micro Surface Texture on Mixed EHL Friction
IDETC-CIE 2017; V010T11A036https://doi.org/10.1115/DETC2017-67002
Topics:
Friction
,
Surface texture
,
Polishing
,
Contact mechanics
,
Elastohydrodynamic lubrication
Influence of Defined Water Contents in Gear Lubricants on the Pitting Performance of Case-Carburized Gears
IDETC-CIE 2017; V010T11A037https://doi.org/10.1115/DETC2017-67016
Topics:
Gears
,
Lubricants
,
Water
,
Contamination
,
Load bearing capacity
,
Materials properties
,
Mechanical drives
,
Mineral oil
,
Residual stresses
,
Stress
An Experimental Study of Influence of Lubrication Methods on Efficiency and Contact Fatigue Life of Spur Gears
IDETC-CIE 2017; V010T11A038https://doi.org/10.1115/DETC2017-67518
Topics:
Fatigue life
,
Lubrication
,
Spur gears
,
Fatigue
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
,
Stress
,
Cycles
,
Machinery
Friction Model Using Full Elastohydrodynamic Lubrication for Spiral Bevel Gears
IDETC-CIE 2017; V010T11A039https://doi.org/10.1115/DETC2017-67646
Topics:
Elastohydrodynamic lubrication
,
Friction
,
Spiral bevel gears
,
Engineering simulation
,
Gears
,
Lubricants
,
Simulation
,
Algorithms
,
Cycles
,
Deformation
Baseline Experimental Results on the Effect of Oil Temperature on Shrouded Meshed Spur Gear Windage Power Loss
IDETC-CIE 2017; V010T11A040https://doi.org/10.1115/DETC2017-67818
Topics:
Spur gears
,
Temperature
,
Gears
,
Drag (Fluid dynamics)
,
Gear teeth
,
Lubrication
,
Maintenance
,
Mechanical drives
,
Pressure
,
Stress
Friction and Wear Properties of Halogen-Free and Halogen-Containing Ionic Liquids Used As Neat Lubricants, Lubricant Additives and Thin Lubricant Layers
IDETC-CIE 2017; V010T11A041https://doi.org/10.1115/DETC2017-67971
Topics:
Friction
,
Lubricants
,
Wear
,
Mineral oil
,
Steel
,
Liquid metals
,
Lubrication
Friction Torque Modelling and Efficiency Analysis of the Preloaded Inverted Planetary Roller Screw Mechanism
IDETC-CIE 2017; V010T11A042https://doi.org/10.1115/DETC2017-68006
Topics:
Friction
,
Modeling
,
Rollers
,
Screws
,
Torque
,
Thread
,
Design
,
Stress
,
Lubricants
,
Optimization
An Experimental Investigation of Churning Power Losses of a Gearbox
IDETC-CIE 2017; V010T11A043https://doi.org/10.1115/DETC2017-68345
Topics:
Mechanical drives
,
Gears
,
Helical gears
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
,
Temperature
,
Automotive transmissions
,
Bearings
,
Disks
Transmission Systems Including Novel Concepts
The Study of Parameters Matching Technology for Integrated Starter Generator
IDETC-CIE 2017; V010T11A044https://doi.org/10.1115/DETC2017-67015
Topics:
Generators
,
Design
,
Economics
,
Electronic systems
,
Engines
,
Hybrid electric vehicles
,
Internal combustion engines
,
Mechanical drives
,
Motors
,
Pollution
Design of a Real-Time Dynamic Test Bench for Testing and Developing a Novel Seamless Two-Speed Transmission for Electric Vehicles
IDETC-CIE 2017; V010T11A045https://doi.org/10.1115/DETC2017-67179
Topics:
Design
,
Electric vehicles
,
Testing
,
Hardware
,
Simulation
,
Computer software
,
Electromagnetic induction
,
Gears
,
Industrial research
,
Matlab
Dynamic Stiffness Model of Planetary Roller Screw Mechanism With Clearance, Geometry Errors and Rolling-Sliding Friction
IDETC-CIE 2017; V010T11A046https://doi.org/10.1115/DETC2017-67488
Topics:
Clearances (Engineering)
,
Errors
,
Friction
,
Geometry
,
Rollers
,
Screws
,
Stiffness
,
Stress
,
Screw threads
,
Thread
A 3D Multi-Body Dynamics Model for Chain-Type Continuously Variable Unit
IDETC-CIE 2017; V010T11A047https://doi.org/10.1115/DETC2017-67887
Topics:
Chain
,
Dynamics (Mechanics)
,
Pulleys
,
Torque
,
Dynamic models
,
Friction
,
Modeling
,
Pins (Engineering)
Contact Mechanics and Elasto-Hydrodynamic Lubrication Analysis of Internal-External Straight Bevel Gear Mesh in a Pericyclic Drive
IDETC-CIE 2017; V010T11A048https://doi.org/10.1115/DETC2017-68001
Topics:
Bevel gears
,
Contact mechanics
,
Lubrication
,
Stress
,
Friction
,
Lubricants
,
Temperature
,
Film thickness
,
Finite element analysis
,
Gears
Email alerts
Most Read Proceedings Papers in IDETC-CIE
Case Study Method for Design Research: A Justification
IDETC-CIE2008
IDETC-CIE2024 Front Matter
IDETC-CIE2024