Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 3: 18th International Conference on Advanced Vehicle Technologies; 13th International Conference on Design Education; 9th Frontiers in Biomedical Devices

18th International Conference on Advanced Vehicle Technologies

Advances in Ground Vehicle Safety and Ergonomics

Vehicle Ride Evaluation on a Four-Post Rig: Is the Vertical Seat Component Sufficient?

Cor-Jacques Kat, Esteban Mendez, Pieter Schalk Els, Miguel Dhaens

IDETC-CIE 2016; V003T01A001https://doi.org/10.1115/DETC2016-59839

Abstract

View Articletitled, Vehicle Ride Evaluation on a Four-Post Rig: Is the Vertical Seat Component Sufficient?

PDF

Topics: Vehicles , Roads , Testing , Accelerometers , Automotive design , Boundary-value problems , Engineering prototypes , Excitation , Simulation models , Surface roughness

Obstacle Identification Through Fast Vector Analysis

Johan Vingbäck, Håkan Lideskog, Magnus Karlberg, Peter Jeppsson

IDETC-CIE 2016; V003T01A002https://doi.org/10.1115/DETC2016-59881

Abstract

View Articletitled, Obstacle Identification Through Fast Vector Analysis

PDF

Topics: Durability , Feedback , Resolution (Optics) , Roads , Shapes , Suspension systems , Vehicles , Wounds

Development and Validation of a Göttingen Miniature Pig Brain Finite Element Model

Keegan Yates, Elizabeth Fievisohn, Warren Hardy, Costin Untaroiu

IDETC-CIE 2016; V003T01A003https://doi.org/10.1115/DETC2016-60217

Abstract

View Articletitled, Development and Validation of a Göttingen Miniature Pig Brain Finite Element Model

PDF

Topics: Brain , Finite element model , Wounds , Biological tissues , Damage , Traumatic brain injury , Density , Diseases , Emergencies , Engineering simulation

Numerical Simulation and Structural Improvement for the Crashworthiness Capacity of M1 Type Commercial Vehicle

Tao Wang, Liangmo Wang

IDETC-CIE 2016; V003T01A004https://doi.org/10.1115/DETC2016-60551

Abstract

View Articletitled, Numerical Simulation and Structural Improvement for the Crashworthiness Capacity of M1 Type Commercial Vehicle

PDF

Topics: Computer simulation , Crashworthiness , Vehicles , Deformation , Absorption , Aluminum , Design , Doors , Finite element analysis , Finite element model

Advances in Ground Vehicles Dynamics and Controls

Mobility Optimization and Control of a 4x4 HE-Vehicle in Curvilinear Motion on Stochastic Terrain

Vladimir V. Vantsevich, Jesse R. Paldan, Blair K. Farley

IDETC-CIE 2016; V003T01A005https://doi.org/10.1115/DETC2016-59207

Abstract

View Articletitled, Mobility Optimization and Control of a 4x4 HE-Vehicle in Curvilinear Motion on Stochastic Terrain

PDF

Topics: Mechanical admittance , Optimization , Vehicles , Wheels , Control algorithms , Mathematics , Trajectories (Physics) , Vehicle dynamics

Novel Monitoring Method of Hypoid Gear Meshing Based on Thermal Network Model and Infrared Thermography Imagery

Mitsuhiko Suzuki, Toshiki Hirogaki, Eiichi Aoyama

IDETC-CIE 2016; V003T01A006https://doi.org/10.1115/DETC2016-59451

Abstract

View Articletitled, Novel Monitoring Method of Hypoid Gear Meshing Based on Thermal Network Model and Infrared Thermography Imagery

PDF

Topics: Network models , Spiral bevel gears , Thermography , Gears , Temperature , Temperature distribution , Automobiles , Circuits , Heat capacity , Heat conduction

Multi-Objective Optimization of Road Vehicle Passive Suspensions With Inerter

Kesavan Ramakrishnan, Liunan Yang, Federico Maria Ballo, Massimiliano Gobbi, Giampiero Mastinu

IDETC-CIE 2016; V003T01A007https://doi.org/10.1115/DETC2016-59864

Abstract

View Articletitled, Multi-Objective Optimization of Road Vehicle Passive Suspensions With Inerter

PDF

Topics: Motor vehicles , Pareto optimization , Architecture , Springs , Design , Stiffness , Dampers , Damping , Roads , Suspension systems

Vehicle Motion Measurements Using Front Facing Camera and Digital Image Correlation

Theunis R. Botha, P. Schalk Els, Bengt Jacobson, Anton Albinsson

IDETC-CIE 2016; V003T01A008https://doi.org/10.1115/DETC2016-59927

Abstract

View Articletitled, Vehicle Motion Measurements Using Front Facing Camera and Digital Image Correlation

PDF

Topics: Motion measurement , Vehicles , Safety , Sensors , Wheels , Algorithms , Excitation , Stability , Tires

Countersteering to Recover Straight Ahead Running After a Disturbance

Fabio della Rossa, Massimiliano Gobbi, Giampiero Mastinu, Giorgio Previati

IDETC-CIE 2016; V003T01A009https://doi.org/10.1115/DETC2016-60001

Abstract

View Articletitled, Countersteering to Recover Straight Ahead Running After a Disturbance

PDF

Topics: Bifurcation , Degrees of freedom , Delays , Equations of motion , Excitation , Particle spin , Rotation , Spin (Aerodynamics) , Steering wheels , Tires

Active Kinematics Suspension Integrating Milliken Moment Method in the Control Logic

Isabel Ramirez Ruiz, Edoardo Sabbioni, Federico Cheli

IDETC-CIE 2016; V003T01A010https://doi.org/10.1115/DETC2016-60088

Abstract

View Articletitled, Active Kinematics Suspension Integrating Milliken Moment Method in the Control Logic

PDF

Topics: Kinematics , Vehicles , Wheels , Stability , Vehicle dynamics , Steering wheels , Yaw , Actuators , Computer software , Dynamics (Mechanics)

Modeling and Simulation of Vehicle Behavior for Design and Tuning of Electronic Differential for Formula Student Vehicle

Maithili Patel, Manthan Mahajan

IDETC-CIE 2016; V003T01A011https://doi.org/10.1115/DETC2016-60105

Abstract

View Articletitled, Modeling and Simulation of Vehicle Behavior for Design and Tuning of Electronic Differential for Formula Student Vehicle

PDF

Topics: Design , Modeling , Simulation , Students , Vehicles , Wheels , Yaw , Control equipment , Control systems , Corners (Structural elements)

Design and Simulation of a Stability Control System for 4 Independent Wheel Drive Electric Vehicle

Juan S. Núñez, Luis E. Muñoz

IDETC-CIE 2016; V003T01A012https://doi.org/10.1115/DETC2016-60308

Abstract

View Articletitled, Design and Simulation of a Stability Control System for 4 Independent Wheel Drive Electric Vehicle

PDF

Topics: Control systems , Design , Electric vehicles , Simulation , Stability , Wheels , Vehicles , Traction , Control equipment , Yaw

Design of Highly Reliable Infrastructural Traffic Monitoring Using Laser and Vision Sensors

Hangxin Liu, Yi Tian, Tomonari Furukawa

IDETC-CIE 2016; V003T01A013https://doi.org/10.1115/DETC2016-60421

Abstract

View Articletitled, Design of Highly Reliable Infrastructural Traffic Monitoring Using Laser and Vision Sensors

PDF

Topics: Design , Lasers , Sensors , Traffic , Vehicles , Reliability , Algorithms , Edge detection , Engineering prototypes , Flight

Influence of Chaotic Characteristics on Ride and Comfort of the Electric Vehicle

Guangqiang Wu, Zhidong Niu

IDETC-CIE 2016; V003T01A014https://doi.org/10.1115/DETC2016-60537

Abstract

View Articletitled, Influence of Chaotic Characteristics on Ride and Comfort of the Electric Vehicle

PDF

Topics: Electric vehicles , Signals , Simulation , Vibration , Dynamics (Mechanics) , Numerical analysis , Vehicles

Advances in Light Vehicles Design

Crushing Analysis of Tapered Ellipse Tubes Under Oblique Impact Loading

Qiang Gao, Liangmo Wang, Yuanlong Wang, Fuxiang Guo, Zunzhi Zhang

IDETC-CIE 2016; V003T01A015https://doi.org/10.1115/DETC2016-59045

Abstract

View Articletitled, Crushing Analysis of Tapered Ellipse Tubes Under Oblique Impact Loading

PDF

Topics: Absorption , Crashworthiness , Cross section (Physics) , Finite element analysis , Seas , Stress , Uncertainty

Identification of the Critical Stiffnesses of Motorcycles in Static and Dynamic Conditions

Alberto Doria, Luca Taraborrelli

IDETC-CIE 2016; V003T01A016https://doi.org/10.1115/DETC2016-59092

Abstract

View Articletitled, Identification of the Critical Stiffnesses of Motorcycles in Static and Dynamic Conditions

PDF

Topics: Deformation , Dynamics (Mechanics) , Excitation , Frequency response , Motorcycles , Stability , Stiffness , Stress , Structural elements (Construction) , Torsion

Mathematical Modelling of the Rear Drive Unit of a Lightweight Vehicle for Sensitivity Analysis of Vibration

Jiewei Lin, Yi Qiu

IDETC-CIE 2016; V003T01A017https://doi.org/10.1115/DETC2016-59810

Abstract

View Articletitled, Mathematical Modelling of the Rear Drive Unit of a Lightweight Vehicle for Sensitivity Analysis of Vibration

PDF

Topics: Modeling , Sensitivity analysis , Vehicles , Vibration , Bushings , Mechanical drives , Design , Stiffness , Roads , Wheels

Analysis of Aerodynamic Drag on Cycling Based on Complementary Numerical and Experimental Studies

Sergio D. Roa, Diego A. Ferreira, Luis E. Muñoz, Omar D. López

IDETC-CIE 2016; V003T01A018https://doi.org/10.1115/DETC2016-60287

Abstract

View Articletitled, Analysis of Aerodynamic Drag on Cycling Based on Complementary Numerical and Experimental Studies

PDF

Topics: Drag (Fluid dynamics) , Computational fluid dynamics , Bicycles , Engineering simulation , Shapes , Simulation

Optimal Planning of the Bike Change Strategy for Hilly Time-Trials on Cycling

Sergio D. Roa, Luis E. Muñoz

IDETC-CIE 2016; V003T01A019https://doi.org/10.1115/DETC2016-60331

Abstract

View Articletitled, Optimal Planning of the Bike Change Strategy for Hilly Time-Trials on Cycling

PDF

Topics: Bicycles , Roads , Optimization

Advances in Methods for Ground Vehicle Systems Design

Review of Brake-by-Wire System Used in Modern Passenger Car

Liangyao Yu, Xiaohui Liu, Zejin Xie, Yi Chen

IDETC-CIE 2016; V003T01A020https://doi.org/10.1115/DETC2016-59279

Abstract

View Articletitled, Review of Brake-by-Wire System Used in Modern Passenger Car

PDF

Topics: Automobiles , Brakes , Wire , Actuators , Energy consumption , Vacuum , Automotive safety , Braking , Design theory , Engines

Investigation of Power Transmission Mechanism Under Three-Axis Driving Planetary Gear Train Based on the Mechanism

Masao Nakagawa, Dai Nishida, Toshiki Hirogaki, Eiichi Aoyama

IDETC-CIE 2016; V003T01A021https://doi.org/10.1115/DETC2016-59475

Abstract

View Articletitled, Investigation of Power Transmission Mechanism Under Three-Axis Driving Planetary Gear Train Based on the Mechanism

PDF

Topics: Planetary gears , Trains , Displacement , Gears , Machinery , Noise (Sound) , Vibration

Validating a Method for Turbocharging Single Cylinder Four Stroke Engines

Michael R. Buchman, Amos G. Winter, V

IDETC-CIE 2016; V003T01A022https://doi.org/10.1115/DETC2016-59593

Abstract

View Articletitled, Validating a Method for Turbocharging Single Cylinder Four Stroke Engines

PDF

Topics: Cylinders , Four-stroke engines , Engines , Turbochargers , Capacitors , Single-cylinder engines , Developing nations , Diesel engines , Compressors , Corporate average fuel economy

Thermo-Elastic Modelling of High Performance Braking Systems

Massimiliano Gobbi, Giampiero Mastinu, Giorgio Previati, Carlo Cantoni, Raffaello Passoni

IDETC-CIE 2016; V003T01A023https://doi.org/10.1115/DETC2016-59996

Abstract

View Articletitled, Thermo-Elastic Modelling of High Performance Braking Systems

PDF

Topics: Braking , Modeling , Thermoelasticity , Brakes , Carbon , Disks , Finite element model , Automotive brakes , Deformation , Design

Advances in Methods for Tire Design and Mechanics

Optimization Algorithm Comparison for In-Plane Flexible Ring Tire Model Parameter Identification

Bin Li, Xiaobo Yang, James Yang, Yunqing Zhang, Zeyu Ma

IDETC-CIE 2016; V003T01A024https://doi.org/10.1115/DETC2016-59096

Abstract

View Articletitled, Optimization Algorithm Comparison for In-Plane Flexible Ring Tire Model Parameter Identification

PDF

Topics: Optimization algorithms , Tires , Algorithms , Matlab

An Impulsive Method for the Analysis of Piezoelectric Energy Harvesters for Intelligent Tires

Alberto Doria, Federico Moro, Daniele Desideri, Alvise Maschio, Zhifeng Zhang

IDETC-CIE 2016; V003T01A025https://doi.org/10.1115/DETC2016-59105

Abstract

View Articletitled, An Impulsive Method for the Analysis of Piezoelectric Energy Harvesters for Intelligent Tires

PDF

Topics: Energy harvesting , Tires , Testing , Design , Excitation , Impulse (Physics) , Computer simulation , Engineering prototypes , Frequency response , Hammers

Parameter Identification for a Longitudinal Dynamics Model Based on Road Tests of an Electric Vehicle

Mohit Batra, John McPhee, Nasser L. Azad

IDETC-CIE 2016; V003T01A026https://doi.org/10.1115/DETC2016-59732

Abstract

View Articletitled, Parameter Identification for a Longitudinal Dynamics Model Based on Road Tests of an Electric Vehicle

PDF

Topics: Dynamics (Mechanics) , Electric vehicles , Roads , Vehicles , Wheels , Algorithms , Center of mass , Computer software , Control equipment , Data acquisition

Comparison of Tire Footprint Measurement Techniques

P. S. Els, M. J. Stallmann, T. R. Botha, A. G. Guthrie, K. R. S. Wright, K. Augsburg, K. Höpping, V. Bernius, C. Sandu, E. Jimenez

IDETC-CIE 2016; V003T01A027https://doi.org/10.1115/DETC2016-59944

Abstract

View Articletitled, Comparison of Tire Footprint Measurement Techniques

PDF

Topics: Tires , Vehicles , Dimensions , Aerodynamics , Fluid-dynamic forces , Pressure , Roads , Shapes , Stress , Testing

Advances in Military and Commercial Ground Vehicle Design

Blast Mitigation Seat Analysis: Evaluation of Lumbar Compression Data Trends in 5^th Percentile Female Anthropomorphic Test Device Performance Compared to 50^th Percentile Male Anthropomorphic Test Device in Drop Tower Testing

Kelly Bosch

IDETC-CIE 2016; V003T01A028https://doi.org/10.1115/DETC2016-59094

Abstract

View Articletitled, Blast Mitigation Seat Analysis: Evaluation of Lumbar Compression Data Trends in 5<sup>th</sup> Percentile Female Anthropomorphic Test Device Performance Compared to 50<sup>th</sup> Percentile Male Anthropomorphic Test Device in Drop Tower Testing

PDF

Topics: Compression , Testing , Weight (Mass) , Wounds , Lumbar spine , Army , Gears , Impulse (Physics) , Military systems , Risk

Control Allocation for Multi-Axle Hub Motor Driven Land Vehicles With Active Steering

Qian Wang, Jatin Goyal, Beshah Ayalew, Amandeep Singh

IDETC-CIE 2016; V003T01A029https://doi.org/10.1115/DETC2016-59509

Abstract

View Articletitled, Control Allocation for Multi-Axle Hub Motor Driven Land Vehicles With Active Steering

PDF

Topics: Motors , Vehicles , Tires , Energy consumption , Yaw , Actuators , Algorithms , Control algorithms , Engineering simulation , Optimal control

Effect of the Deformation of the Supporting Structure on the Measurement of the Inertia Properties of Vehicles

Giorgio Previati, Massimiliano Gobbi, Federico Ballo

IDETC-CIE 2016; V003T01A030https://doi.org/10.1115/DETC2016-59823

Abstract

View Articletitled, Effect of the Deformation of the Supporting Structure on the Measurement of the Inertia Properties of Vehicles

PDF

Topics: Deformation , Inertia (Mechanics) , Vehicles , Center of mass , Theoretical analysis , Construction , Dimensions , Finite element methods , Finite element model , Light trucks

Physics Based Modelling of a Magneto-Rheological Equipped Hydro-Pneumatic Semi-Active Suspension System

Gerhardus S. Heymans, Jacob F. Grobler, P. Schalk Els

IDETC-CIE 2016; V003T01A031https://doi.org/10.1115/DETC2016-59922

Abstract

View Articletitled, Physics Based Modelling of a Magneto-Rheological Equipped Hydro-Pneumatic Semi-Active Suspension System

PDF

Topics: Modeling , Physics , Rheology , Suspension systems , Flow (Dynamics) , Valves , Damping , Fluids , Springs , Switches

Modeling, Experiments, and Parameter Sensitivity Analysis of Hydraulic Electromagnetic Shock Absorber

Sijing Guo, Lin Xu, Yilun Liu, Mingyi Liu, Xuexun Guo, Lei Zuo

IDETC-CIE 2016; V003T01A032https://doi.org/10.1115/DETC2016-60390

Abstract

View Articletitled, Modeling, Experiments, and Parameter Sensitivity Analysis of Hydraulic Electromagnetic Shock Absorber

PDF

Topics: Modeling , Sensitivity analysis , Shock absorbers , Damping , Secondary cells , Vehicles , Vibration , Corporate average fuel economy , Dynamic models , Electrical measurement

Advances in Vehicle Electrification and Powertrain Design

Optimal Design and Techno-Economic Analysis of a Hybrid Solar Vehicle: Incorporating Solar Energy as an On-Board Fuel Toward Future Mobility

Mahmoud Abdelhamid, Imtiaz Haque, Rajendra Singh, Srikanth Pilla, Zoran Filipi

IDETC-CIE 2016; V003T01A033https://doi.org/10.1115/DETC2016-59276

Abstract

View Articletitled, Optimal Design and Techno-Economic Analysis of a Hybrid Solar Vehicle: Incorporating Solar Energy as an On-Board Fuel Toward Future Mobility

PDF

Topics: Design , Fuels , Mechanical admittance , Solar energy , Vehicles , Photovoltaic power systems , Propulsion systems , Renewable energy , Aerodynamics , Batteries

Spray-Formed Hybrid-Field Electric Motor

Martin Hosek, Jayaraman Krishnasamy, Sripati Sah, Taylor Bashaw

IDETC-CIE 2016; V003T01A034https://doi.org/10.1115/DETC2016-59339

Abstract

View Articletitled, Spray-Formed Hybrid-Field Electric Motor

PDF

Topics: Electric motors , Sprays , Motors , Additive manufacturing , Energy efficiency , Engineering prototypes , Magnetic flux , Magnetic materials , Power density , Topology

Feasibility of a Clutchless Dual-Shaft Hybrid Transmission System for Performance Applications

Sahil Shah, Victor Prost, Zachary Eubanks, Paige Reiter, Daria Bondarchuk, Yu Hua, Daniel S. Dorsch, Amos G. Winter, V

IDETC-CIE 2016; V003T01A035https://doi.org/10.1115/DETC2016-59955

Abstract

View Articletitled, Feasibility of a Clutchless Dual-Shaft Hybrid Transmission System for Performance Applications

PDF

Topics: Batteries , Cities , Cycles , Electric motors , Electricity (Physics) , Energy efficiency , Gears , Inertia (Mechanics) , Internal combustion engines , Regenerative braking

A Combined Plant/Controller Optimization Framework for Hybrid Vehicles With MPG, Emissions and Drivability Considerations

Huckleberry Febbo, Tulga Ersal, Jeffrey L. Stein

IDETC-CIE 2016; V003T01A036https://doi.org/10.1115/DETC2016-60335

Abstract

View Articletitled, A Combined Plant/Controller Optimization Framework for Hybrid Vehicles With MPG, Emissions and Drivability Considerations

PDF

Topics: Control equipment , Emissions , Hybrid electric vehicles , Optimization , Design , Cycles , Tradeoffs , Corporate average fuel economy , Dynamic programming , Fuel consumption

TEG Cold Side Heat Transfer Analysis for Harvesting the Exhaust Heat Energy

Gangfeng Tan, Kangping Ji, Xuexun Guo, Mengying Yang, Lei Zuo

IDETC-CIE 2016; V003T01A037https://doi.org/10.1115/DETC2016-60562

Abstract

View Articletitled, TEG Cold Side Heat Transfer Analysis for Harvesting the Exhaust Heat Energy

PDF

Topics: Exhaust systems , Heat , Heat transfer , Temperature , Energy generation , Cooling systems , Coolants , Diesel engines , Internal combustion engines , Temperature control

13th International Conference on Design Education

Best Practices in Design Education

Improving Novelty and Quality During Introductory Mechanical Design Competitions

Daniela Faas, Shuya Gong

IDETC-CIE 2016; V003T04A001https://doi.org/10.1115/DETC2016-59251

Abstract

View Articletitled, Improving Novelty and Quality During Introductory Mechanical Design Competitions

PDF

Topics: Construction , Design , Design engineering , Mechanical engineering , Robotics , Robots , Students

Using Rapid Manufacturability Analysis Tools to Enhance Design-for-Manufacturing Training in Engineering Education

Roby Lynn, Kathryn Jablokow, Nithin Reddy, Christopher Saldana, Tommy Tucker, Timothy W. Simpson, Thomas Kurfess, Christopher Williams

IDETC-CIE 2016; V003T04A002https://doi.org/10.1115/DETC2016-59295

Abstract

View Articletitled, Using Rapid Manufacturability Analysis Tools to Enhance Design-for-Manufacturing Training in Engineering Education

PDF

Topics: Design for Manufacturing , Engineering education , Design , Manufacturing , Students , Additive manufacturing , Education , Machining , Computer software , Engineering students

Makerspaces in Engineering Education: A Case Study

Lasse Skovgaard Jensen, Ali Gürcan Özkil, Krestine Mougaard

IDETC-CIE 2016; V003T04A003https://doi.org/10.1115/DETC2016-60066

Abstract

View Articletitled, Makerspaces in Engineering Education: A Case Study

PDF

Topics: Education , Engineering design , Engineering education , Engineering teachers , Innovation , Product development , Students , Workshops (Work spaces)

How Do I Choose? The Influence of Concept Selection Methods on Student Team Decision-Making

Xuan Zheng, Scarlett R. Miller

IDETC-CIE 2016; V003T04A004https://doi.org/10.1115/DETC2016-60333

Abstract

View Articletitled, How Do I Choose? The Influence of Concept Selection Methods on Student Team Decision-Making

PDF

Topics: Decision making , Students , Teams , Creativity , Design , Design education , Engineering design

Cognitive Empathy in Design Course for a More Inclusive Mechanical Engineering

Kathleen Wong (Lau), Rebecca L. Norris, Zahed Siddique, M. Cengiz Altan, James Baldwin, Wilson Merchan-Merchan

IDETC-CIE 2016; V003T04A005https://doi.org/10.1115/DETC2016-60382

Abstract

View Articletitled, Cognitive Empathy in Design Course for a More Inclusive Mechanical Engineering

PDF

Topics: Design education , Mechanical engineering , Design , Students , Mechanical engineering education , Mechanical engineers , Teams , Undergraduate students

Design Education in the Curriculum

Uncertainty Topics for Engineering Design Courses

Xiaoping Du

IDETC-CIE 2016; V003T04A006https://doi.org/10.1115/DETC2016-59035

Abstract

View Articletitled, Uncertainty Topics for Engineering Design Courses

PDF

Topics: Engineering design , Uncertainty , Design , Engineering education , Reliability , Design education , Education , Engineering systems and industry applications , Engineering teachers , Failure mechanisms

Decision Making in Course Design

Jeffrey W. Herrmann

IDETC-CIE 2016; V003T04A007https://doi.org/10.1115/DETC2016-59047

Abstract

View Articletitled, Decision Making in Course Design

PDF

Topics: Decision making , Design , Engineering education , Education , Students , Engineering design , Engineering design processes , Teaching

Knowledge Retention and Scoring Metrics for Functional Modeling in an Engineering Design Context

Marie Riggs, Philip Mountain, Robert L. Nagel, Matt R. Bohm, Julie S. Linsey

IDETC-CIE 2016; V003T04A008https://doi.org/10.1115/DETC2016-59640

Abstract

View Articletitled, Knowledge Retention and Scoring Metrics for Functional Modeling in an Engineering Design Context

PDF

Topics: Engineering design , Modeling , Students , Homework , Design , Design methodology , Engineering students , Teaching

Significance, Prevalence and Implications for Bio-Inspired Design Courses in the Undergraduate Engineering Curriculum

Jacquelyn K. S. Nagel, Ramana M. Pidaparti

IDETC-CIE 2016; V003T04A009https://doi.org/10.1115/DETC2016-59661

Abstract

View Articletitled, Significance, Prevalence and Implications for Bio-Inspired Design Courses in the Undergraduate Engineering Curriculum

PDF

Topics: Biomimetics , Design education , Undergraduate students , Design , Competencies , Teaching , Students , Education , Engineering design , Engineers

Development of Competencies and Their Inter-Relationships in an Engineering Design Course

Madhumitha Ramachandran, Zahed Siddique

IDETC-CIE 2016; V003T04A010https://doi.org/10.1115/DETC2016-59694

Abstract

View Articletitled, Development of Competencies and Their Inter-Relationships in an Engineering Design Course

PDF

Topics: Competencies , Engineering design , Students , Design education , Design , Testing , Undergraduate students

Design Education Across Disciplines: Opportunities for Curriculum Advancement

Anthony A. Nix, Mark T. Lemke, Ryan M. Arlitt, Robert B. Stone

IDETC-CIE 2016; V003T04A011https://doi.org/10.1115/DETC2016-59767

Abstract

View Articletitled, Design Education Across Disciplines: Opportunities for Curriculum Advancement

PDF

Topics: Design education , Engineering disciplines , Design , Students , Engineering design , Mathematics , Mechanical engineering , Design methodology , Engineers , Industrial design

Identifying Freehand Sectional View Technical Drawing Activities in Engineering Design Graphics Course to Enhance Spatial Skills of Engineering Students

Anirudh Srinivasan, Jeremy D. Smith, Diana Bairaktarova

IDETC-CIE 2016; V003T04A012https://doi.org/10.1115/DETC2016-60079

Abstract

View Articletitled, Identifying Freehand Sectional View Technical Drawing Activities in Engineering Design Graphics Course to Enhance Spatial Skills of Engineering Students

PDF

Topics: Engineering design , Engineering students , Students , Engineering drawings , Engineering education , Solids , Visualization

The Development and Effects of Teaching Perspective Free-Hand Sketching in Engineering Design

Ethan Hilton, Wayne Li, Sunni H. Newton, Meltem Alemdar, Raghuram Pucha, Julie Linsey

IDETC-CIE 2016; V003T04A013https://doi.org/10.1115/DETC2016-60250

Abstract

View Articletitled, The Development and Effects of Teaching Perspective Free-Hand Sketching in Engineering Design

PDF

Topics: Engineering design , Teaching , Design , Students , Computer software , Computer-aided design , Engineering drawing and drafting , Engineering drawings , Engineering education , Engineering graphics

Motivational Differences Between Senior and Freshman Engineering Design Students: A Multi-Institution Study

Amanda Bessette, Beshoy Morkos, Shraddha Sangelkar

IDETC-CIE 2016; V003T04A014https://doi.org/10.1115/DETC2016-60341

Abstract

View Articletitled, Motivational Differences Between Senior and Freshman Engineering Design Students: A Multi-Institution Study

PDF

Topics: Engineering design , Students , Undergraduate students , Design education , Design engineering , Mechanical engineering , Statistical analysis

Let’s Get Physical? The Impact of Dissection Modality on Engineering Student Design Learning

Elizabeth M. Starkey, Alexander S. McKay, Samuel T. Hunter, Scarlett R. Miller

IDETC-CIE 2016; V003T04A015https://doi.org/10.1115/DETC2016-60364

Abstract

View Articletitled, Let’s Get Physical? The Impact of Dissection Modality on Engineering Student Design Learning

PDF

Topics: Design , Engineering students , Students , Education , Engineering design processes , Engineering education , Performance

Research Methods and Assessment of Design Education

Understanding the Impact of Expertise on Design Outcome: An Approach Based on Concept Inventories and Item Response Theory

Murtuza Shergadwala, Karthik N. Kannan, Jitesh H. Panchal

IDETC-CIE 2016; V003T04A016https://doi.org/10.1115/DETC2016-59038

Abstract

View Articletitled, Understanding the Impact of Expertise on Design Outcome: An Approach Based on Concept Inventories and Item Response Theory

PDF

Topics: Design , Performance , Formal methods , Product development , Thermography

Integrating Model-Based Design and Physical Design Evaluation for Improved Design Education

Anand P. Deshmukh, Marlon E. Mitchell, James T. Allison

IDETC-CIE 2016; V003T04A017https://doi.org/10.1115/DETC2016-59299

Abstract

View Articletitled, Integrating Model-Based Design and Physical Design Evaluation for Improved Design Education

PDF

Topics: Design , Design education , Students , Engineering design , Engineering design processes , Suspension systems , Bearings , Design engineering , Dynamic systems , Gages

Improving Engineering Graphics Grading Using a Shape Similarity Algorithm: An Initial Investigation

Rahul Renu, Anthony Garland, Sarah Grigg, John Minor, Nighat Yasmin

IDETC-CIE 2016; V003T04A018https://doi.org/10.1115/DETC2016-59597

Abstract

View Articletitled, Improving Engineering Graphics Grading Using a Shape Similarity Algorithm: An Initial Investigation

PDF

Topics: Algorithms , Engineering graphics , Shapes , Solid models , Students , Feedback , Computer software , Decision making , Design , Solid modeling

Exploring the Link Between Task Complexity and Students’ Affective States During Engineering Laboratory Activities

Qianyu Hu, Shruthi Bezawada, Allison Gray, Conrad Tucker, Timothy Brick

IDETC-CIE 2016; V003T04A019https://doi.org/10.1115/DETC2016-59757

Abstract

View Articletitled, Exploring the Link Between Task Complexity and Students’ Affective States During Engineering Laboratory Activities

PDF

Topics: Engineering laboratories , Students , Machinery , Feedback , Risk , Sawing machines , Testing

Short Papers: Innovations in Design Education

Polytechnic Design Thinking From the Beginning

Rustin Webster, Joseph Dues, Jr.

IDETC-CIE 2016; V003T04A020https://doi.org/10.1115/DETC2016-59090

Abstract

View Articletitled, Polytechnic Design Thinking From the Beginning

PDF

Topics: Design , Students , Teams , Robots , Collaboration , Robotics , Teaching , Creativity , Innovation , Light sources

Promotion of Innovation and Entrepreneurship in Engineering Design by Synchronizing Engineering and Business School Courses

José E. Lugo, Mari Luz Zapata-Ramos, Manuel J. Perez-Vargas

IDETC-CIE 2016; V003T04A021https://doi.org/10.1115/DETC2016-59701

Abstract

View Articletitled, Promotion of Innovation and Entrepreneurship in Engineering Design by Synchronizing Engineering and Business School Courses

PDF

Topics: Engineering design , Entrepreneurship , Innovation , Students , Design , Education , Teams

Designing Integrated STEM Education: Linking STEM Teachers and Learners in a K-20 Continuum

Zahra Shahbazi, MaryAnn Jacobs, Alexandra Lehnes, Kathleen Mancuso

IDETC-CIE 2016; V003T04A022https://doi.org/10.1115/DETC2016-60288

Abstract

View Articletitled, Designing Integrated STEM Education: Linking STEM Teachers and Learners in a K-20 Continuum

PDF

Topics: Design , Education , Engineering teachers , Students , Undergraduate students , Career development , Cities , Collaboration , Engineering design , Engineering education

Exploring the Use of Reverse Engineering as a Means to Introduce Engineering to Middle School Students

Gerid D. Paquette, Deep N. Patel, Amanda Bessette, Beshoy W. Morkos

IDETC-CIE 2016; V003T04A023https://doi.org/10.1115/DETC2016-60358

Abstract

View Articletitled, Exploring the Use of Reverse Engineering as a Means to Introduce Engineering to Middle School Students

PDF

Topics: Reverse engineering , Students , Engineers , Dryers , Education , Electric drills , Engineering teachers , Gages , K-12 students , Transfer functions

9th Frontiers in Biomedical Devices

Computational Modeling and Simulation

Mechanical Characterization of Brain Tissue in Compression

Abbas Shafiee, Mohammad Taghi Ahmadian, Maryam Hoviattalab

IDETC-CIE 2016; V003T11A001https://doi.org/10.1115/DETC2016-59019

Abstract

View Articletitled, Mechanical Characterization of Brain Tissue in Compression

PDF

Topics: Biological tissues , Brain , Compression , Finite element analysis , Biomechanics , Modeling , Relaxation (Physics) , Stress , Stress-strain curves , Traumatic brain injury

Traumatic Brain Injury Caused by +Gz Acceleration

Abbas Shafiee, Mohammad Taghi Ahmadian, Maryam Hoviattalab

IDETC-CIE 2016; V003T11A002https://doi.org/10.1115/DETC2016-59021

Abstract

View Articletitled, Traumatic Brain Injury Caused by +Gz Acceleration

PDF

Topics: Traumatic brain injury , Brain , Pressure , Computerized tomography , Damage , Imaging , Magnetic resonance imaging , Modeling , Physiology , Soft tissues

Experimental and Numerical Investigation of Vision Impairment in Long-Term Exposure to Microgravity

Guangbin Shao, Longqiu Li, Hongtao Zhang, Xinrong Zhou, Tingting Li, Hualei Dong

IDETC-CIE 2016; V003T11A003https://doi.org/10.1115/DETC2016-59433

Abstract

View Articletitled, Experimental and Numerical Investigation of Vision Impairment in Long-Term Exposure to Microgravity

PDF

Topics: Astronauts , Biomechanics , Carbon dioxide , Coherence (Optics) , Computer simulation , Disks , Finite element analysis , Numerical analysis , Photography , Physiology

Application of Digital Human Models to Physiotherapy Training

Takao Kakizaki, Jiro Urii, Mitsuru Endo

IDETC-CIE 2016; V003T11A004https://doi.org/10.1115/DETC2016-59455

Abstract

View Articletitled, Application of Digital Human Models to Physiotherapy Training

PDF

Topics: Education , Kinematics , Students , Visualization

Modeling the Variability of Glenoid Geometry in Intact Shoulders

Charlotte M. de Vries, Matthew B. Parkinson

IDETC-CIE 2016; V003T11A005https://doi.org/10.1115/DETC2016-59934

Abstract

View Articletitled, Modeling the Variability of Glenoid Geometry in Intact Shoulders

PDF

Topics: Geometry , Modeling , Bone , Design , Principal component analysis , Arthroplasty , Computerized tomography , Engineers , Fittings , Osteoarthritis

Mechanical Design and Analysis of a Wheelchair Mounted Robotic Arm With Adaptable Gripper and Remote Actuation System

Matthew Ahlstedt, Carter Duling, Yimesker Yihun

IDETC-CIE 2016; V003T11A006https://doi.org/10.1115/DETC2016-60408

Abstract

View Articletitled, Mechanical Design and Analysis of a Wheelchair Mounted Robotic Arm With Adaptable Gripper and Remote Actuation System

PDF

Topics: Design engineering , Grippers , Robotics , Wheelchairs , Design , Belts , Diseases , End effectors , Engineering simulation , Gearmotors

Modeling Post-Impact Injury Propagation in Traumatic Brain Injury

Nikhil Pillai, Abani Patra, Ehsan Esfahani

IDETC-CIE 2016; V003T11A007https://doi.org/10.1115/DETC2016-60444

Abstract

View Articletitled, Modeling Post-Impact Injury Propagation in Traumatic Brain Injury

PDF

Topics: Modeling , Traumatic brain injury , Wounds , Magnetic resonance imaging , Blood , Brain , Calibration , Deformation , Finite element analysis , Magnetic resonance

Spike Sorting via Multi Cluster Feature Selection

Azadeh Dinparastdjadid, Ehsan T. Esfahani

IDETC-CIE 2016; V003T11A008https://doi.org/10.1115/DETC2016-60456

Abstract

View Articletitled, Spike Sorting via Multi Cluster Feature Selection

PDF

Topics: Feature selection , Brain , Computers , Data mining , Machine learning , Optimization

General Biomedical Devices

Wearable On-Demand Oxygen Therapy

Chandan Hebbale, Katherine Fu

IDETC-CIE 2016; V003T11A009https://doi.org/10.1115/DETC2016-59199

Abstract

View Articletitled, Wearable On-Demand Oxygen Therapy

PDF

Topics: Oxygen , Patient treatment , Design , Innovation , Pressure

A Robust Method to Improve Estimation Accuracy of Walking Gait Kinematics by Considering Geometrical Constraints on Kinect Data

Mostafa Ghobadi, Ehsan T. Esfahani

IDETC-CIE 2016; V003T11A010https://doi.org/10.1115/DETC2016-60180

Abstract

View Articletitled, A Robust Method to Improve Estimation Accuracy of Walking Gait Kinematics by Considering Geometrical Constraints on Kinect Data

PDF

Topics: Kinematics , Algorithms , Fittings , Motor controls , Cycles , Gait analysis , Polynomials , Sensors , Uncertainty

Monitoring and Change Point Estimation of Normal (In-Control) and Fatigued (Out-of-Control) State in Workers

Zahra Sedighi Maman, Amir Baghdadi, Fadel Megahed, Lora Cavuoto

IDETC-CIE 2016; V003T11A011https://doi.org/10.1115/DETC2016-60487

Abstract

View Articletitled, Monitoring and Change Point Estimation of Normal (In-Control) and Fatigued (Out-of-Control) State in Workers

PDF

Topics: Accelerometers , Fatigue , Manufacturing , Materials handling , Sensors , Statistical analysis , Statistical process control , Visualization

Implantable and Wearable Devices

Analysis of an Energy Saving Ratchet-Based Ankle Exoskeleton

Davide Piovesan, Phanindra Alladi

IDETC-CIE 2016; V003T11A012https://doi.org/10.1115/DETC2016-60137

Abstract

View Articletitled, Analysis of an Energy Saving Ratchet-Based Ankle Exoskeleton

PDF

Topics: Energy consumption , Exoskeleton devices , Muscle , Springs , Stress , Tendons , Tension

Design and Control of an Active Palm Roll Joint for the Human Prosthetic Hand

Brad Newby, Nicholas Youngers, Visharath Adhikari, Yimesker Yihun, Hamid Lankarani

IDETC-CIE 2016; V003T11A013https://doi.org/10.1115/DETC2016-60237

Abstract

View Articletitled, Design and Control of an Active Palm Roll Joint for the Human Prosthetic Hand

PDF

Topics: Artificial limbs , Design , Grasping , Degrees of freedom , Kinematics , Shapes

A Dynamic Model of Electrostrictive Unimorph Actuators for Haptic Devices

Tahzib Safwat, Ryan Tosto, Michael D. Grissom, Christopher D. Rahn

IDETC-CIE 2016; V003T11A014https://doi.org/10.1115/DETC2016-60512

Abstract

View Articletitled, A Dynamic Model of Electrostrictive Unimorph Actuators for Haptic Devices

PDF

Topics: Actuators , Dynamic models , Haptics , Conducting polymers , Displacement , Dynamics (Mechanics) , Feedback , Frequency response , Piezoelectric materials , Stiffness

Energy Harvesting From Arterial Blood Pressure for Embedded Brain Sensing

Aditya Nanda, M. Amin Karami

IDETC-CIE 2016; V003T11A015https://doi.org/10.1115/DETC2016-60573

Abstract

View Articletitled, Energy Harvesting From Arterial Blood Pressure for Embedded Brain Sensing

PDF

Topics: Blood , Brain , Energy harvesting , Pressure , Cylinders , Transfer functions , Blood flow , Design , Hamilton's principle , Piezoelectricity

All Years

Proceedings Papers

18th International Conference on Advanced Vehicle Technologies

Advances in Ground Vehicle Safety and Ergonomics

Advances in Ground Vehicles Dynamics and Controls

Advances in Light Vehicles Design

Advances in Methods for Ground Vehicle Systems Design

Advances in Methods for Tire Design and Mechanics

Advances in Military and Commercial Ground Vehicle Design

Advances in Vehicle Electrification and Powertrain Design

13th International Conference on Design Education

Best Practices in Design Education

Design Education in the Curriculum

Research Methods and Assessment of Design Education

Short Papers: Innovations in Design Education

9th Frontiers in Biomedical Devices

Computational Modeling and Simulation

General Biomedical Devices

Implantable and Wearable Devices

Email alerts

Most Read Proceedings Papers in IDETC-CIE

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only