Skip Nav Destination

Proceedings Papers

Select Decade

Select Year

Select Volume

Volume 3: 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices

17th International Conference on Advanced Vehicle Technologies

Advances in Ground Vehicle Safety and Ergonomics

Experimental Study on Single Wheel Hub Motor Failures and Their Impact on the Driver-Vehicle Behavior

Daniel Wanner, Isabel Neumann, Lars Drugge, Peter Cocron, Maxim Bierbach, Annika Stensson Trigell

IDETC-CIE 2015; V003T01A001doi:https://doi.org/10.1115/DETC2015-46178

Abstract

View Articletitled, Experimental Study on Single Wheel Hub Motor Failures and Their Impact on the Driver-Vehicle Behavior

PDF

Topics: Engines , Failure , Motors , Vehicles , Wheels , Traffic , Brakes , Cities , Electric vehicles , Road safety

Study of Occupant Safety and Airbag Deployment Time

Steven Yang, Kristian Lardner, Moustafa El-Gindy

IDETC-CIE 2015; V003T01A002doi:https://doi.org/10.1115/DETC2015-46507

Abstract

View Articletitled, Study of Occupant Safety and Airbag Deployment Time

PDF

Topics: Airbags , Safety , Finite element analysis , Impact testing , Sensors , Simulation , Vehicles , Computer software , Wounds , Compression

Corrugated Tube Inversion for Energy Absorption

Yang Li, Zhong You

IDETC-CIE 2015; V003T01A003doi:https://doi.org/10.1115/DETC2015-47135

Abstract

View Articletitled, Corrugated Tube Inversion for Energy Absorption

PDF

Topics: Absorption , Buckling , Stability , Stress , Transportation systems

Development and Preliminary Validation of a 50^th Percentile Pedestrian Finite Element Model

Costin D. Untaroiu, Jacob B. Putnam, Jeremy Schap, Matt L. Davis, F. Scott Gayzik

IDETC-CIE 2015; V003T01A004doi:https://doi.org/10.1115/DETC2015-47781

Abstract

View Articletitled, Development and Preliminary Validation of a 50th Percentile Pedestrian Finite Element Model

PDF

Topics: Finite element model , Vehicles , Impact testing , Lumbar spine , Roads , Wounds , Accidents , Collisions (Physics) , Design , Engineering simulation

Map-Based Navigation of an Autonomous Car Using Grid-Based Scan-to-Map Matching

Tomonari Furukawa, Kuya Takami, Xianqiao Tong, Daniel Watman, Abbi Hamed, Ravindra Ranasinghe, Gamini Dissanayake

IDETC-CIE 2015; V003T01A005doi:https://doi.org/10.1115/DETC2015-47936

Abstract

View Articletitled, Map-Based Navigation of an Autonomous Car Using Grid-Based Scan-to-Map Matching

PDF

Topics: Driverless cars , Navigation , Errors , Brakes , Computers , Gaussian distribution , Robots , Wheels

The Active Safety of the Automobile in the Future

Huyao Wu

IDETC-CIE 2015; V003T01A006doi:https://doi.org/10.1115/DETC2015-47939

Abstract

View Articletitled, The Active Safety of the Automobile in the Future

PDF

Topics: Automobiles , Safety , Automotive industry , Closed loop systems , Corporate average fuel economy , Cyber-physical systems , Dynamics (Mechanics) , Fuel efficiency , Inventions , Vehicles

Advances in Ground Vehicles Dynamics and Controls

Rack Force Estimation for Electric Power Steering

Thomas Weiskircher, Steve Fankem, Beshah Ayalew

IDETC-CIE 2015; V003T01A007doi:https://doi.org/10.1115/DETC2015-46228

Abstract

View Articletitled, Rack Force Estimation for Electric Power Steering

PDF

Topics: Electricity (Physics) , Friction , Steering systems , Algorithms , Engineering simulation , Simulation , Sliding friction , Stress

An Experimental Demonstrator of Semi-Active Tire Damping Enhancement

Vladimir V. Vantsevich, Gabriel D. Judd

IDETC-CIE 2015; V003T01A008doi:https://doi.org/10.1115/DETC2015-46766

Abstract

View Articletitled, An Experimental Demonstrator of Semi-Active Tire Damping Enhancement

PDF

Topics: Damping , Tires , Rolling friction , Design , Excitation , Oscillations , Suspension systems , Testing , Vehicles , Vibration

Damping Characteristics of a Hydraulic Electric Rectifier Shock Absorber and its Effect on Vehicle Dynamics

Lin Xu, Yilun Liu, Sijing Guo, Xuexun Guo, Lei Zuo

IDETC-CIE 2015; V003T01A009doi:https://doi.org/10.1115/DETC2015-46916

Abstract

View Articletitled, Damping Characteristics of a Hydraulic Electric Rectifier Shock Absorber and its Effect on Vehicle Dynamics

PDF

Topics: Damping , Shock absorbers , Vehicle dynamics , Design , Roads , Dynamics (Mechanics) , Energy harvesting , Inertia (Mechanics) , Secondary cells , Simulation models

Magneto-Rheological (MR) Valve for Use in Hydro-Pneumatic Suspensions

Jacob F. Grobler, Schalk Els

IDETC-CIE 2015; V003T01A010doi:https://doi.org/10.1115/DETC2015-47071

Abstract

View Articletitled, Magneto-Rheological (MR) Valve for Use in Hydro-Pneumatic Suspensions

PDF

Topics: Rheology , Valves , Vehicles , Roads , Dampers , Solenoids , Flow (Dynamics) , Suspension systems , Damping , Design

A Comparison of Quarter, Half and Full Vehicle Models With Experimental Ride Comfort Data

Herman A. Hamersma, Schalk Els

IDETC-CIE 2015; V003T01A011doi:https://doi.org/10.1115/DETC2015-47180

Abstract

View Articletitled, A Comparison of Quarter, Half and Full Vehicle Models With Experimental Ride Comfort Data

PDF

Topics: Vehicles , Degrees of freedom , Automobiles , Center of mass , Computer software , Engineers , Kinematics , Rotation , Wheels

The Augmented Electronic Stability Program With Semi-Active Air Suspension Integrated

Guangqiang Wu, Ye Guanghu

IDETC-CIE 2015; V003T01A012doi:https://doi.org/10.1115/DETC2015-47202

Abstract

View Articletitled, The Augmented Electronic Stability Program With Semi-Active Air Suspension Integrated

PDF

Topics: Electronic stability control , Vehicles , Automobiles , Safety , Stability , Springs , Stiffness , Trajectories (Physics)

Road-Vehicles Control Logic Integrating Real Time Multibody Model Follower

Isabel Ramirez Ruiz, Edoardo Sabbioni, Francesco Braghin, Federico Cheli

IDETC-CIE 2015; V003T01A013doi:https://doi.org/10.1115/DETC2015-47322

Abstract

View Articletitled, Road-Vehicles Control Logic Integrating Real Time Multibody Model Follower

PDF

Topics: Algorithms , Brakes , Computer software , Control equipment , Control systems , Damping , Dynamic response , Equations of motion , Gears , Motor vehicles

Anti-Lock Wheel Slip Control With an Adaptive Searching Algorithm for the Optimal Slip

Ning Pan, Liangyao Yu, Lei Zhang, Zhizhong Wang, Jian Song

IDETC-CIE 2015; V003T01A014doi:https://doi.org/10.1115/DETC2015-47347

Abstract

View Articletitled, Anti-Lock Wheel Slip Control With an Adaptive Searching Algorithm for the Optimal Slip

PDF

Topics: Algorithms , Locks (Waterways) , Wheels , Roads , Friction , Control equipment , Engineering simulation , Gain scheduling , Pressure , Simulation

A Cooperative Driving NLMPC for Real Time Collision Avoidance

Ugo Rosolia, Francesco Braghin, Edoardo Sabbioni, Andrew Alleyne, Stijn De Bruyne

IDETC-CIE 2015; V003T01A015doi:https://doi.org/10.1115/DETC2015-47463

Abstract

View Articletitled, A Cooperative Driving NLMPC for Real Time Collision Avoidance

PDF

Topics: Collisions (Physics) , Vehicles , Trajectories (Physics) , Computer simulation , Predictive control

Effect of Redundant Actuation on the Mobility of Wheeled Robots on Unstructured Terrain

Bahareh Ghotbi, Francisco González, Jozsef Kövecses, Jorge Angeles

IDETC-CIE 2015; V003T01A016doi:https://doi.org/10.1115/DETC2015-47614

Abstract

View Articletitled, Effect of Redundant Actuation on the Mobility of Wheeled Robots on Unstructured Terrain

PDF

Topics: Mechanical admittance , Robots , Traction , Vehicles , Control algorithms , Engineering prototypes , Negotiation , Risk , Wheels

Sprung Mass Motion Emulation in a Braking Test Rig

Chunjian Wang, Qian Wang, Jeffery Anderson, Beshah Ayalew

IDETC-CIE 2015; V003T01A017doi:https://doi.org/10.1115/DETC2015-47691

Abstract

View Articletitled, Sprung Mass Motion Emulation in a Braking Test Rig

PDF

Topics: Braking , Vehicles , Actuators , Antilock braking systems , Hardware , Manufacturing , Stability , Stress , Tires , Vehicle dynamics

Advances in Light Vehicles Design

The Effect of Front Fork Compliance on the Stability of Bicycles

Alberto Doria, Luca Taraborrelli, Nicola Segliani

IDETC-CIE 2015; V003T01A018doi:https://doi.org/10.1115/DETC2015-46103

Abstract

View Articletitled, The Effect of Front Fork Compliance on the Stability of Bicycles

PDF

Topics: Bicycles , Stability , Torsion , Damping , Stiffness , Carbon , Computer simulation , Dampers , Degrees of freedom , Experimental methods

The Modal Twist Axis: A Method for Describing the Dynamical Characteristics of Single Track Vehicles

Alberto Doria, Luca Taraborrelli

IDETC-CIE 2015; V003T01A019doi:https://doi.org/10.1115/DETC2015-46266

Abstract

View Articletitled, The Modal Twist Axis: A Method for Describing the Dynamical Characteristics of Single Track Vehicles

PDF

Topics: Vehicles , Structural elements (Construction) , Motorcycles , Damping , Stability , Stiffness , Accelerometers , Dynamics (Mechanics) , Elasticity , Engines

On-Road Evaluation of Energy Cost on Cycling: A Case Study for Analyzing Tire Pressure Influence

Sergio Daniel Roa, Luis Ernesto Muñoz

IDETC-CIE 2015; V003T01A020doi:https://doi.org/10.1115/DETC2015-46639

Abstract

View Articletitled, On-Road Evaluation of Energy Cost on Cycling: A Case Study for Analyzing Tire Pressure Influence

PDF

Topics: Pressure , Roads , Tires , Circuits , Bicycles , Rolling friction

A Review of Anti-Lock Braking System Configuration for Two-Wheeled Vehicle

Liangyao Yu, Shuhao Huo, Xiaohui Liu, Xiaoxue Liu

IDETC-CIE 2015; V003T01A021doi:https://doi.org/10.1115/DETC2015-47319

Abstract

View Articletitled, A Review of Anti-Lock Braking System Configuration for Two-Wheeled Vehicle

PDF

Topics: Antilock braking systems , Vehicles , Automobiles , Bicycles , Motorcycles , Trucks , Wounds

Development of a Servohydraulic Roller Test Bench for Indoor Evaluation of the Vibrational Comfort of Bicycle Components

Nicola Petrone, Francesco Trabacchin, Fausto Panizzolo

IDETC-CIE 2015; V003T01A022doi:https://doi.org/10.1115/DETC2015-47824

Abstract

View Articletitled, Development of a Servohydraulic Roller Test Bench for Indoor Evaluation of the Vibrational Comfort of Bicycle Components

PDF

Topics: Bicycles , Rollers , Wheels , Actuators , Roads , Random vibration , Vibration

Multi-Level Optimization Method for Vehicle Body in Conceptual Design

Wenbin Hou, Chunlai Shan, Hongzhe Zhang

IDETC-CIE 2015; V003T01A023doi:https://doi.org/10.1115/DETC2015-48034

Abstract

View Articletitled, Multi-Level Optimization Method for Vehicle Body in Conceptual Design

PDF

Topics: Conceptual design , Optimization , Vehicles , Algorithms , Design , Optimization algorithms , Computer-aided engineering , Engineers , Genetic algorithms , Product development

Advances in Methods for Ground Vehicle Systems Design

Stability of Controlled Road Vehicles: A Preliminary Fundamental Study

Fabio della Rossa, Massimiliano Gobbi, Giampiero Mastinu, Carlo Piccardi, Giorgio Previati

IDETC-CIE 2015; V003T01A024doi:https://doi.org/10.1115/DETC2015-46608

Abstract

View Articletitled, Stability of Controlled Road Vehicles: A Preliminary Fundamental Study

PDF

Topics: Motor vehicles , Stability , Vehicles , Bifurcation , Steering wheels , Tires , Computation , Degrees of freedom , Equations of motion , Equilibrium (Physics)

Design of a Lightweight Truck Wheel

Massimiliano Gobbi, Mario Guagliano, Giampiero Mastinu, Giorgio Previati, Andrea Finzi, Nicola Vaona, Daniele Maestrini, Gianpaolo Marconi, Alessandro Bailini, Giordano Pinarello

IDETC-CIE 2015; V003T01A025doi:https://doi.org/10.1115/DETC2015-47206

Abstract

View Articletitled, Design of a Lightweight Truck Wheel

PDF

Topics: Design , Trucks , Wheels , Manufacturing , Geometry , Durability , Energy efficiency , Fatigue life , Fatigue strength , Laser cutting

Transient Thermal Analysis of Brake Disc in Regenerative Braking System Using Finite Element Analysis

Parth Pandya

IDETC-CIE 2015; V003T01A026doi:https://doi.org/10.1115/DETC2015-47284

Abstract

View Articletitled, Transient Thermal Analysis of Brake Disc in Regenerative Braking System Using Finite Element Analysis

PDF

Topics: Brakes , Disks , Finite element analysis , Regenerative braking , Thermal analysis , Transients (Dynamics) , Rotors , Design , Braking , Electric vehicles

Advances in Methods for Tire Design and Mechanics

Weighted Orthogonal Distance Regression for Tire Models Parameters Identification

JoseLuis Olazagoitia, Alberto López

IDETC-CIE 2015; V003T01A027doi:https://doi.org/10.1115/DETC2015-46498

Abstract

View Articletitled, Weighted Orthogonal Distance Regression for Tire Models Parameters Identification

PDF

Topics: Tires , Errors , Optimization , Fittings

FEA Tire Modeling and Validation Techniques

Mehrsa Marjani, Moustafa El-Gindy, David Philipps, Fredrik Öijer, Inge Johansson

IDETC-CIE 2015; V003T01A028doi:https://doi.org/10.1115/DETC2015-46514

Abstract

View Articletitled, FEA Tire Modeling and Validation Techniques

PDF

Topics: Finite element analysis , Modeling , Tires , Rolling friction , Computers , Engineering simulation , Industrial research , Roads , Simulation , Soil

Structural Stiffness of Tire Calculated From Strain Energy

Namcheol Kang, Jong-Jin Bae, Jong Beom Suh

IDETC-CIE 2015; V003T01A029doi:https://doi.org/10.1115/DETC2015-46589

Abstract

View Articletitled, Structural Stiffness of Tire Calculated From Strain Energy

PDF

Topics: Stiffness , Tires , Deflection , Finite element methods , Pressure , Young's modulus

Motorcycle Tire Modeling

Federico Ballo, Massimiliano Gobbi, Giampiero Mastinu, Giorgio Previati, Roberto Zerboni

IDETC-CIE 2015; V003T01A030doi:https://doi.org/10.1115/DETC2015-46607

Abstract

View Articletitled, Motorcycle Tire Modeling

PDF

Topics: Modeling , Motorcycles , Tires , Finite element model , Stress , Wheels , Deflection , Design

A Particle Filter Approach for Identifying Tyre Model Parameters From Full-Scale Experimental Tests

Ruixin Bao, Francesco Braghin, Federico Cheli, Edoardo Sabbioni

IDETC-CIE 2015; V003T01A031doi:https://doi.org/10.1115/DETC2015-46614

Abstract

View Articletitled, A Particle Filter Approach for Identifying Tyre Model Parameters From Full-Scale Experimental Tests

PDF

Topics: Filters , Particulate matter , Tires , Vehicles , Automobiles , Control systems , Design , Engineering simulation , Kalman filters , Particle filtering (numerical methods)

In-Plane Flexible Ring Tire Model Validation Through ADAMS FTire Model Virtual Tests

Bin Li, Xiaobo Yang, Ankang Jin, Yunqing Zhang, James Yang

IDETC-CIE 2015; V003T01A032doi:https://doi.org/10.1115/DETC2015-46630

Abstract

View Articletitled, In-Plane Flexible Ring Tire Model Validation Through ADAMS FTire Model Virtual Tests

PDF

Topics: Model validation , Tires , Belts , Shapes , Roads , Friction , Dampers , Simulation , Simulation results , Springs

Kinematic Analysis of the Planar Motion of Vehicles When Travelling Along Tractrix Curves

Giorgio Figliolini, Chiara Lanni

IDETC-CIE 2015; V003T01A033doi:https://doi.org/10.1115/DETC2015-46924

Abstract

View Articletitled, Kinematic Analysis of the Planar Motion of Vehicles When Travelling Along Tractrix Curves

PDF

Topics: Kinematic analysis , Vehicles , Wheels , Corners (Structural elements) , Traffic circles , Trucks , Algorithms , Bicycles , Design , Hazards

Dual-Stiffness Behavior of Fatigued Tire Rubber

Ruofan Liu, Erol Sancaktar

IDETC-CIE 2015; V003T01A034doi:https://doi.org/10.1115/DETC2015-47782

Abstract

View Articletitled, Dual-Stiffness Behavior of Fatigued Tire Rubber

PDF

Topics: Rubber , Stiffness , Tires , Particulate matter , Carbon black pigments , Chain , Cycles , Damage , Fatigue , Fracture (Materials)

Application of X-Ray Micro-CT Method to Assess Damage/Flaw Presence and Progression in Tire Rubber Materials

Ruofan Liu, Erol Sancaktar

IDETC-CIE 2015; V003T01A035doi:https://doi.org/10.1115/DETC2015-47809

Abstract

View Articletitled, Application of X-Ray Micro-CT Method to Assess Damage/Flaw Presence and Progression in Tire Rubber Materials

PDF

Topics: Damage , Rubber , Tires , X-rays , Computerized tomography , Failure , Fatigue , Styrene-butadiene rubber

Advances in Military and Commercial Ground Vehicle Design

Blast Mitigation Seat Analysis: Assessment of the Effect of Personal Protective Equipment on the 5^th Percentile Female Anthropomorphic Test Device Performance in Drop Tower Evaluations

Kelly Bosch, Katrina Harris, David Clark, Risa Scherer, Joseph Melotik

IDETC-CIE 2015; V003T01A036doi:https://doi.org/10.1115/DETC2015-46342

Abstract

View Articletitled, Blast Mitigation Seat Analysis: Assessment of the Effect of Personal Protective Equipment on the 5th Percentile Female Anthropomorphic Test Device Performance in Drop Tower Evaluations

PDF

Topics: Compression , Military systems , Stress , Testing , Wounds

The Effects of Soldier Gear Encumbrance on Restraints in a Frontal Crash Environment

Sebastian K. Karwaczynski, Ryan W. Hoover, Chris P. Jessup, Kyle M. Paulson

IDETC-CIE 2015; V003T01A037doi:https://doi.org/10.1115/DETC2015-46367

Abstract

View Articletitled, The Effects of Soldier Gear Encumbrance on Restraints in a Frontal Crash Environment

PDF

Topics: Gears , Soldiers , Military vehicles , Wounds , Restraint systems , Design , Testing , Absorption , Airbags , Ammunition

Relaxation Length Review and Time Constant Analysis for Agile Tire Dynamics Control

Vladimir V. Vantsevich, Jeremy P. Gray

IDETC-CIE 2015; V003T01A038doi:https://doi.org/10.1115/DETC2015-46798

Abstract

View Articletitled, Relaxation Length Review and Time Constant Analysis for Agile Tire Dynamics Control

PDF

Topics: Dynamics (Mechanics) , Relaxation (Physics) , Tires , Mechanical admittance , Military systems , Off-road vehicles , Vehicles , Control algorithms , Hardware , Transients (Dynamics)

Experimental and Numerical Investigation of Automotive Aerodynamics Using DrivAer Model

Lu Miao, Steffen Mack, Thomas Indinger

IDETC-CIE 2015; V003T01A039doi:https://doi.org/10.1115/DETC2015-47805

Abstract

View Articletitled, Experimental and Numerical Investigation of Automotive Aerodynamics Using DrivAer Model

PDF

Topics: Aerodynamics , Wheels , Drag (Fluid dynamics) , Lift (Fluid dynamics) , Wind tunnels , Automobiles , Automotive design , Computational fluid dynamics , Motor vehicles , Reynolds-averaged Navier–Stokes equations

Transmission Efficiency Research of Multi-Range Hydro-Mechanical CVT

Zhang Mingzhu, Zhou Zhili, Xu Liyou

IDETC-CIE 2015; V003T01A040doi:https://doi.org/10.1115/DETC2015-48078

Abstract

View Articletitled, Transmission Efficiency Research of Multi-Range Hydro-Mechanical CVT

PDF

Topics: Algorithms , Displacement , Engines , Pressure , Pumps , Thermodynamic power cycles , Torque

Advances in Vehicle Electrification and Powertrain Design

Cost-Effective Architecture for Integrating Look-Ahead Information for Commercial Vehicle Powertrains

Xubin Song, Zhijun Tang, Rajeev Verma

IDETC-CIE 2015; V003T01A041doi:https://doi.org/10.1115/DETC2015-46206

Abstract

View Articletitled, Cost-Effective Architecture for Integrating Look-Ahead Information for Commercial Vehicle Powertrains

PDF

Topics: Vehicles , Sensors , System architecture , Computers , Databases , Design , Fuels , Optimization , Radar , Testing

Analysis on Three-Mode Configurations of Power-Split Hybrid Electric Vehicle

Chunwang Liu, Jibin Hu, Zengxiong Peng, Shujun Yang

IDETC-CIE 2015; V003T01A042doi:https://doi.org/10.1115/DETC2015-46754

Abstract

View Articletitled, Analysis on Three-Mode Configurations of Power-Split Hybrid Electric Vehicle

PDF

Topics: Design , Hybrid electric vehicles , Levers , Motors , Torque

Simulation and Control of a Novel Two-Speed Uninterrupted Mechanical Transmission for Electric Vehicles

Shengnan Fang, Jian Song, Yuzhuo Tai, Fei Li, Truong Sinh Nguyen

IDETC-CIE 2015; V003T01A043doi:https://doi.org/10.1115/DETC2015-46939

Abstract

View Articletitled, Simulation and Control of a Novel Two-Speed Uninterrupted Mechanical Transmission for Electric Vehicles

PDF

Topics: Electric vehicles , Mechanical drives , Simulation , Control equipment , Engines , Gears , Motors

Application of Hub-Wheel Electric Motor Integrated With Two Step Planetary Transmission for Heavy Off-Road Vehicles

Mohammad Gerami Tehrani, Juho Montonen, Paula Immonen, Simo Sinkko, Esa-Pekka Kaikko, Jarkko Nokka, Jussi Sopanen, Juha Pyrhönen

IDETC-CIE 2015; V003T01A044doi:https://doi.org/10.1115/DETC2015-47030

Abstract

View Articletitled, Application of Hub-Wheel Electric Motor Integrated With Two Step Planetary Transmission for Heavy Off-Road Vehicles

PDF

Topics: Electric motors , Off-road vehicles , Wheels , Vehicles , Simulation , Architecture , Construction equipment , Design , Energy consumption , Engines

Visual Performance Maps for Human Choice in Hybrid Electric Vehicle’s In-Wheel Motors: Part I — Purchase Criteria

Hoon Lee, Pradeepkumar Ashok, Delbert Tesar

IDETC-CIE 2015; V003T01A045doi:https://doi.org/10.1115/DETC2015-47521

Abstract

View Articletitled, Visual Performance Maps for Human Choice in Hybrid Electric Vehicle’s In-Wheel Motors: Part I — Purchase Criteria

PDF

Topics: Motors , Wheels , Maintenance , Vehicles , Hybrid electric vehicles

Visual Performance Maps for Human Choice in Hybrid Electric Vehicle’s In-Wheel Motors: Part II — Operation, Maintenance, and Refreshment Criteria

Hoon Lee, Pradeepkumar Ashok, Delbert Tesar

IDETC-CIE 2015; V003T01A046doi:https://doi.org/10.1115/DETC2015-47566

Abstract

View Articletitled, Visual Performance Maps for Human Choice in Hybrid Electric Vehicle’s In-Wheel Motors: Part II — Operation, Maintenance, and Refreshment Criteria

PDF

Topics: Maintenance , Motors , Wheels , Braking , Asphalt , Roads , Tires , Weight (Mass) , Durability , Hybrid electric vehicles

Model-Based Design and Evaluation of Electric Vehicle Powertrain With Independent Driving Motors

Haotian Wu, Haiyan Zhang

IDETC-CIE 2015; V003T01A047doi:https://doi.org/10.1115/DETC2015-47980

Abstract

View Articletitled, Model-Based Design and Evaluation of Electric Vehicle Powertrain With Independent Driving Motors

PDF

Topics: Design , Electric vehicles , Motors , Wheels , Batteries , Braking , Energy consumption , Roads , Stability , Torque

Topological Design of Parallel Hybrid Transmission With Electric Torque Support

Zengxiong Peng, Shihua Yuan, Jibin Hu, Mingfei Gao

IDETC-CIE 2015; V003T01A048doi:https://doi.org/10.1115/DETC2015-48062

Abstract

View Articletitled, Topological Design of Parallel Hybrid Transmission With Electric Torque Support

PDF

Topics: Design , Torque , Gears , Electric motors , Nonlinear equations , Algorithms , Automotive industry , Combustion , Corporate average fuel economy , Degrees of freedom

12th International Conference on Design Education

Building in Design and Advanced Manufacturing

A 3D Printing Vending Machine and its Impact on the Democratization of 3D Printing on a College Campus

Sanjai Bashyam, Joshua Kuhn, Carolyn Conner Seepersad

IDETC-CIE 2015; V003T04A001doi:https://doi.org/10.1115/DETC2015-46470

Abstract

View Articletitled, A 3D Printing Vending Machine and its Impact on the Democratization of 3D Printing on a College Campus

PDF

Topics: Additive manufacturing , Machinery , Innovation , Errors , Internet , Statistics , Students

Assessment of Design and Build Projects in Sophomore Design

Richard Bannerot

IDETC-CIE 2015; V003T04A002doi:https://doi.org/10.1115/DETC2015-46651

Abstract

View Articletitled, Assessment of Design and Build Projects in Sophomore Design

PDF

Topics: Design , Students , Teams , Creativity , Performance , Robustness , Sales , Testing

Advancing the Additive Manufacturing Workforce: Summary and Recommendations From a NSF Workshop

Christopher B. Williams, Timothy W. Simpson, Michael Hripko

IDETC-CIE 2015; V003T04A003doi:https://doi.org/10.1115/DETC2015-47274

Abstract

View Articletitled, Advancing the Additive Manufacturing Workforce: Summary and Recommendations From a NSF Workshop

PDF

Topics: Additive manufacturing , Workshops (Work spaces) , Design , Students , Education , Manufacturing , Creativity , Engineering design processes , Engineering fundamentals , Governments

Investigating the Impact of Interactive Immersive Virtual Reality Environments in Enhancing Task Performance in Online Engineering Design Activities

Ajay Karthic B. Gopinath Bharathi, Conrad S. Tucker

IDETC-CIE 2015; V003T04A004doi:https://doi.org/10.1115/DETC2015-47388

Abstract

View Articletitled, Investigating the Impact of Interactive Immersive Virtual Reality Environments in Enhancing Task Performance in Online Engineering Design Activities

PDF

Topics: Engineering design , Virtual reality , Students , Education , Engineering laboratories , Engineering teachers , Functional analysis , Teams , Testing

The Can Crusher Project: A Multi-Semester Design Project to Enhance Retention of Engineering Skill Sets

Gerald A. Sullivan, Jon-Michael Hardin

IDETC-CIE 2015; V003T04A005doi:https://doi.org/10.1115/DETC2015-47417

Abstract

View Articletitled, The Can Crusher Project: A Multi-Semester Design Project to Enhance Retention of Engineering Skill Sets

PDF

Topics: Design , Students , Computer programming , Computer-aided design , Electronics , Machining , Manufacturing

Creativity and Innovation

Creativity ‘Misrules’: First Year Engineering Students’ Production and Perception of Creativity in Design Ideas

Colin M. Gray, Seda Yilmaz, Shanna Daly, Colleen M. Seifert, Richard Gonzalez

IDETC-CIE 2015; V003T04A006doi:https://doi.org/10.1115/DETC2015-46492

Abstract

View Articletitled, Creativity ‘Misrules’: First Year Engineering Students’ Production and Perception of Creativity in Design Ideas

PDF

Topics: Creativity , Design , Engineering students , Students , Engineering design

Evaluating the Effectiveness of Problem Formulation and Ideation Skills Learned Throughout an Engineering Design Course

Mahmoud Dinar, Yong-Seok Park, Jami J. Shah

IDETC-CIE 2015; V003T04A007doi:https://doi.org/10.1115/DETC2015-46542

Abstract

View Articletitled, Evaluating the Effectiveness of Problem Formulation and Ideation Skills Learned Throughout an Engineering Design Course

PDF

Topics: Engineering design , Students , Design , Conceptual design , Design education , Engineering prototypes , Product design

A Cross-Sectional and Longitudinal Examination of the Development of Innovation Capability in Undergraduate Engineering Students

Trina C. Kershaw, Rebecca L. Peterson, Molly A. McCarthy, Adam P. Young, Carolyn Conner Seepersad, Paul T. Williams, Katja Hölttä-Otto, Sankha Bhowmick

IDETC-CIE 2015; V003T04A008doi:https://doi.org/10.1115/DETC2015-47650

Abstract

View Articletitled, A Cross-Sectional and Longitudinal Examination of the Development of Innovation Capability in Undergraduate Engineering Students

PDF

Topics: Innovation , Undergraduate students , Students , Engineering design

Methods to Aid Learning

Learning Design Through Student-Generated Learning Aids

David C. Jensen, Dennis Beck

IDETC-CIE 2015; V003T04A009doi:https://doi.org/10.1115/DETC2015-46617

Abstract

View Articletitled, Learning Design Through Student-Generated Learning Aids

PDF

Topics: Design , Students , Additive manufacturing , Engineering education , Construction , Design engineering , Engineering prototypes , Engineers , Failure , Undergraduate students

Teaching Interdisciplinary Design Between Architecture and Engineering: Finding Common Ground While Retaining Disciplinary Expertise

Timothy Li, Nilanjan Raghunath, Katja Hölttä-Otto, Asli Arpak, Suranga Nanayakkara, Cassandra Telenko

IDETC-CIE 2015; V003T04A010doi:https://doi.org/10.1115/DETC2015-46873

Abstract

View Articletitled, Teaching Interdisciplinary Design Between Architecture and Engineering: Finding Common Ground While Retaining Disciplinary Expertise

PDF

Topics: Design , Teaching , Design education , Students , Engineering disciplines , Engineering teachers , Feedback , Undergraduate students

An Initial Comparison Between Geographically Distributed and Non-Distributed Student Teams in Design Projects

José E. Lugo, Constanza Miranda

IDETC-CIE 2015; V003T04A011doi:https://doi.org/10.1115/DETC2015-46952

Abstract

View Articletitled, An Initial Comparison Between Geographically Distributed and Non-Distributed Student Teams in Design Projects

PDF

Topics: Design , Students , Teams , Engineers , Mechanical admittance , Product design , Product development

Bridging the Gaps: Augmenting Design Learning Through Computer-Aided Exploration

Anirudh Roshan Sriram, DeLean Tolbert, Monica Cardella, Karthik Ramani

IDETC-CIE 2015; V003T04A012doi:https://doi.org/10.1115/DETC2015-46978

Abstract

View Articletitled, Bridging the Gaps: Augmenting Design Learning Through Computer-Aided Exploration

PDF

Topics: Computer-aided engineering , Design , Finite element analysis , Decision making , Engineering design , Students , Bridges (Structures) , Computational methods , Computers , Optimization

Evaluation of a Model Based Learning Approach for Engineering Design

Kjell Andersson

IDETC-CIE 2015; V003T04A013doi:https://doi.org/10.1115/DETC2015-47276

Abstract

View Articletitled, Evaluation of a Model Based Learning Approach for Engineering Design

PDF

Topics: Engineering design , Students , Engineering prototypes , Machine design , Education , Design , Design methodology , Manufacturing , Performance , Teaching

New Topics and Content in Design Courses

Development of Engineering Uncertainty Repository

Xiaoping Du

IDETC-CIE 2015; V003T04A014doi:https://doi.org/10.1115/DETC2015-46172

Abstract

View Articletitled, Development of Engineering Uncertainty Repository

PDF

Topics: Uncertainty , Engineering education , Teaching , Dynamics (Mechanics) , Education , Engineering design

Studying the Impact of Incorporating an Additive Manufacturing Based Design Exercise in a Large, First Year Technical Drawing and CAD Course

Tian Chen, Paul Egan, Fritz Stöckli, Kristina Shea

IDETC-CIE 2015; V003T04A015doi:https://doi.org/10.1115/DETC2015-47312

Abstract

View Articletitled, Studying the Impact of Incorporating an Additive Manufacturing Based Design Exercise in a Large, First Year Technical Drawing and CAD Course

PDF

Topics: Additive manufacturing , Computer-aided design , Design , Students , Manufacturing , Automobiles , Engineering design , Engineering education , Modeling

Implementing Creativity Evaluation Tools Into the Concept Selection Process in Engineering Education

Elizabeth M. Starkey, Christopher A. Gosnell, Scarlett R. Miller

IDETC-CIE 2015; V003T04A016doi:https://doi.org/10.1115/DETC2015-47396

Abstract

View Articletitled, Implementing Creativity Evaluation Tools Into the Concept Selection Process in Engineering Education

PDF

Topics: Creativity , Engineering education , Design , Students , Teams , Engineering design , Engineering students , Undergraduate students

Improving Senior Capstone Design Student Performance Through Integration of Presentation Intervention Plan

Amanda Bessette, Beshoy Morkos, Shraddha Sangelkar

IDETC-CIE 2015; V003T04A017doi:https://doi.org/10.1115/DETC2015-47604

Abstract

View Articletitled, Improving Senior Capstone Design Student Performance Through Integration of Presentation Intervention Plan

PDF

Topics: Design , Students , Design education , Mechanical engineering , Statistical analysis , Teams

Short Papers: Design Education Innovations

Design and Build for Gondwanna: A Course in Mechanical and Electronic Design

Warren F. Smith

IDETC-CIE 2015; V003T04A018doi:https://doi.org/10.1115/DETC2015-46646

Abstract

View Articletitled, Design and Build for Gondwanna: A Course in Mechanical and Electronic Design

PDF

Topics: Design , Engineering prototypes , Students

Exploring the Retention of Sustainable Design Principles in Engineering Practice Through Design Education

Bryony DuPont, Addison Wisthoff

IDETC-CIE 2015; V003T04A019doi:https://doi.org/10.1115/DETC2015-46778

Abstract

View Articletitled, Exploring the Retention of Sustainable Design Principles in Engineering Practice Through Design Education

PDF

Topics: Design education , Green design , Design engineering , Sustainability , Undergraduate students , Design , Product development , Students , Engineering design processes , Homework

Case Study for Introductory Mechanical Design Competitions

Daniela Faas, Robert D. Howe

IDETC-CIE 2015; V003T04A020doi:https://doi.org/10.1115/DETC2015-47286

Abstract

View Articletitled, Case Study for Introductory Mechanical Design Competitions

PDF

Topics: Conceptual design , Construction , Design , Design education , Design engineering , Linkages , Machine components , Manufacturing , Mechanical engineering , Robots

Design Integration Into Circuits and Mechatronics Courses

Jacquelyn K. S. Nagel, S. Keith Holland

IDETC-CIE 2015; V003T04A021doi:https://doi.org/10.1115/DETC2015-47455

Abstract

View Articletitled, Design Integration Into Circuits and Mechatronics Courses

PDF

Topics: Circuits , Design , Mechatronics education , Students , Electronic systems , Engineers , Feedback , Teams

Advancing Student Learning of Design for Additive Manufacturing Principles Through an Extracurricular Vehicle Design Competition

Christopher B. Williams, Logan Sturm, Alfred E. Wicks

IDETC-CIE 2015; V003T04A022doi:https://doi.org/10.1115/DETC2015-47622

Abstract

View Articletitled, Advancing Student Learning of Design for Additive Manufacturing Principles Through an Extracurricular Vehicle Design Competition

PDF

Topics: Additive manufacturing , Automotive design , Design , Students , Vehicles , Electronics , Engineers , Military systems , Natural disasters , Supply chains

Interdisciplinary Design Education Based on Collaboration Between Arts and Engineering Schools

Soo Yeon Leem, Sang Won Lee

IDETC-CIE 2015; V003T04A023doi:https://doi.org/10.1115/DETC2015-47792

Abstract

View Articletitled, Interdisciplinary Design Education Based on Collaboration Between Arts and Engineering Schools

PDF

Topics: Collaboration , Design education , Innovation , Design , Students , Teams

Thinking in Design

Course-Based Undergraduate Research: A Review of Models and Practices

Anne Harris, Mohammed Babkoor, Tianchang Gu, Gül E. Kremer

IDETC-CIE 2015; V003T04A024doi:https://doi.org/10.1115/DETC2015-46126

Abstract

View Articletitled, Course-Based Undergraduate Research: A Review of Models and Practices

PDF

Topics: Undergraduate research , Students , Performance , Teams , Undergraduate students

Ideation Variety in Mechanical Design: Examining the Effects of Cognitive Style and Design Heuristics

Kathryn Jablokow, Wesley Teerlink, Seda Yilmaz, Shanna Daly, Eli Silk, Christian Wehr

IDETC-CIE 2015; V003T04A025doi:https://doi.org/10.1115/DETC2015-46334

Abstract

View Articletitled, Ideation Variety in Mechanical Design: Examining the Effects of Cognitive Style and Design Heuristics

PDF

Topics: Design , Design engineering , Students , Innovation , Mechanical engineering

Bridging Learning Gap Through Peer-to-Peer Information Exchange in a Flat Environment

Madhumitha Ramachandran, Zahed Siddique, Gül E. Okudan Kremer, Firas Akasheh

IDETC-CIE 2015; V003T04A026doi:https://doi.org/10.1115/DETC2015-47379

Abstract

View Articletitled, Bridging Learning Gap Through Peer-to-Peer Information Exchange in a Flat Environment

PDF

Topics: Computers , Design , Feedback , Performance , Sheet metal work , Students , Teaching , Teams

Design Talking: How Design Practitioners Talk About Design Research Methods

Celeste Roschuni, Julia Kramer, Alice Agogino

IDETC-CIE 2015; V003T04A027doi:https://doi.org/10.1115/DETC2015-47843

Abstract

View Articletitled, Design Talking: How Design Practitioners Talk About Design Research Methods

PDF

Topics: Design , Workshops (Work spaces) , Design methodology , Engineering teachers , Students , Design education , Engineering disciplines , Feedback , Gates (Closures)

Fostering Diverse Analogical Transfer in Bio-Inspired Design

Jacquelyn K. S. Nagel, Linda Schmidt, Werner Born

IDETC-CIE 2015; V003T04A028doi:https://doi.org/10.1115/DETC2015-47922

Abstract

View Articletitled, Fostering Diverse Analogical Transfer in Bio-Inspired Design

PDF

Topics: Biomimetics , Design , Biology , Teaching , Engineering design , Engineering students , Students

8th Frontiers in Biomedical Devices

Computational Modeling and Simulation

Micromechanical Modeling of Connective Soft Tissues

Ali Fallah, Mohammad Taghi Ahmadian, Keikhosrow Firoozbakhsh

IDETC-CIE 2015; V003T14A001doi:https://doi.org/10.1115/DETC2015-46165

Abstract

View Articletitled, Micromechanical Modeling of Connective Soft Tissues

PDF

Topics: Modeling , Soft tissues , Biological tissues , Fibers , Boundary-value problems , Constitutive equations , Tendons

Regional Responses of Rat Brain to Impactor Parameters

Yi Hua, Praveen Akula, Matthew Kelso, Linxia Gu

IDETC-CIE 2015; V003T14A002doi:https://doi.org/10.1115/DETC2015-47373

Abstract

View Articletitled, Regional Responses of Rat Brain to Impactor Parameters

PDF

Topics: Brain , Shapes , Deformation , Finite element analysis , Traumatic brain injury

Development of an Image-Based Biomechanical Model for Assessment of Hip Fracture Risk

Masoud Nasiri Sarvi, Yunhua Luo

IDETC-CIE 2015; V003T14A003doi:https://doi.org/10.1115/DETC2015-47878

Abstract

View Articletitled, Development of an Image-Based Biomechanical Model for Assessment of Hip Fracture Risk

PDF

Topics: Biomechanics , Hip fractures , Risk , Dynamics (Mechanics) , Finite element analysis , Weight (Mass) , X-rays

Topological Optimization of Coronary Stents

Shijia Zhao, Linxia Gu

IDETC-CIE 2015; V003T14A004doi:https://doi.org/10.1115/DETC2015-47958

Abstract

View Articletitled, Topological Optimization of Coronary Stents

PDF

Topics: Optimization , Stents , Design , Topology , Stiffness , Dimensions , Stress , Struts (Engineering)

A Compound Risk Indicator for Subject-Specific Prediction of Hip Fracture in Sideways Falls

Masoud Nasiri Sarvi, Yunhua Luo

IDETC-CIE 2015; V003T14A005doi:https://doi.org/10.1115/DETC2015-48052

Abstract

View Articletitled, A Compound Risk Indicator for Subject-Specific Prediction of Hip Fracture in Sideways Falls

PDF

Topics: Hip fractures , Risk , Biomechanics , Soft tissues , Anatomy , Bone , Density , Dynamics (Mechanics) , Finite element model , Fracture (Materials)

General Biomedical Devices

An Automatic System for Analyzing Phantom Images to Determine the Reliability of PET/SPECT Cameras

Miri Weiss Cohen, John A. Kennedy, Archil Pirmisashvili, Gleb Orlikov

IDETC-CIE 2015; V003T14A006doi:https://doi.org/10.1115/DETC2015-46254

Abstract

View Articletitled, An Automatic System for Analyzing Phantom Images to Determine the Reliability of PET/SPECT Cameras

PDF

Topics: Phantoms , Reliability , Quality control , Resolution (Optics)

Low-Cost Label-Free Bio-Detection System Using Double-Sided Grating Waveguide Couplers

Yi-Fan Ku, Hsun-Yuan Li, Yu-Chung Lin, Wen-Hsin Hsieh, Guo-En Chang

IDETC-CIE 2015; V003T14A007doi:https://doi.org/10.1115/DETC2015-46296

Abstract

View Articletitled, Low-Cost Label-Free Bio-Detection System Using Double-Sided Grating Waveguide Couplers

PDF

Topics: Diffraction gratings , Waveguides , Biomedicine , Biosensors , Injection molding , Light-emitting diodes , Refractive index , Resolution (Optics) , Sputtering (Irradiation)

Development of a Remote Ultrasound Imaging System

Reza Fotouhi, Rahim Oraji, Carlos Mondragon, Brennan Berryman

IDETC-CIE 2015; V003T14A008doi:https://doi.org/10.1115/DETC2015-46826

Abstract

View Articletitled, Development of a Remote Ultrasound Imaging System

PDF

Topics: Ultrasonic imaging , Manipulators , Haptics , Probes , Ultrasound , Biomedicine , Robotics , Robots , Satellites

Design and Validation of a Dynamic Digital Ruler for Hands-Free Chronic Wound Assessment

Etienne Dumesnil, Divya Konda, Gabriel Aldaz, Hnin Ookhin, David Pickham, Lauren Aquino Shluzas

IDETC-CIE 2015; V003T14A009doi:https://doi.org/10.1115/DETC2015-46997

Abstract

View Articletitled, Design and Validation of a Dynamic Digital Ruler for Hands-Free Chronic Wound Assessment

PDF

Topics: Design , Gages , Dimensions , Glass , Accuracy and precision , American Petroleum Institute , Batteries , Computer software , Feedback , Humanoid robots

Automated Cell Segmentation Method for Extracting Cell Information From Phase Contrast Microscopy of a Microfluidic Device

Masoud Khabiry, Nader Jalili

IDETC-CIE 2015; V003T14A010doi:https://doi.org/10.1115/DETC2015-47451

Abstract

View Articletitled, Automated Cell Segmentation Method for Extracting Cell Information From Phase Contrast Microscopy of a Microfluidic Device

PDF

Topics: Image segmentation , Microfluidics , Phase contrast microscopes , Flow (Dynamics) , Image processing , Imaging , Microscopy , Shear stress

Soft Pressure Sensing Sleeve for Direct Cardiac Compression Device

Markus A. Horvath, Ellen T. Roche, Daniel M. Vogt, David J. Mooney, Frank A. Pigula, Conor J. Walsh

IDETC-CIE 2015; V003T14A011doi:https://doi.org/10.1115/DETC2015-47567

Abstract

View Articletitled, Soft Pressure Sensing Sleeve for Direct Cardiac Compression Device

PDF

Topics: Compression , Pressure , Manufacturing , Sensors , Blood , Circuits , Design , Silicones , Surface mount devices , Cardiovascular system

Robotic Assistive Device for Phlebotomy

Paulo Carvalho, Anurag Kesari, Sean Weaver, Patrick Flaherty, Gregory S. Fischer

IDETC-CIE 2015; V003T14A012doi:https://doi.org/10.1115/DETC2015-47620

Abstract

View Articletitled, Robotic Assistive Device for Phlebotomy

PDF

Topics: Robotics , Blood , Needles , Force feedback , Health care , Health systems , Imaging , Phantoms , Testing , Wounds

In Vivo Testing of Noninvasive ICP Monitoring Methodology in a Porcine Model

Jeff A. Hawks, Chase Pfeifer, Max Twedt, Greg Bashford, William Thorell, James Gigantelli

IDETC-CIE 2015; V003T14A013doi:https://doi.org/10.1115/DETC2015-47655

Abstract

View Articletitled, In Vivo Testing of Noninvasive ICP Monitoring Methodology in a Porcine Model

PDF

Topics: Testing , Cornea , Data collection , Engineering prototypes , Damage , Electrical resistivity , Hemodynamics , Pressure , Stress , Ultrasonic imaging