Skip Nav Destination
Proceedings Papers
In This Volume
Volume 1A: 35th Computers and Information in Engineering Conference
35th Computers and Information in Engineering Conference
Advanced Modeling and Simulation
Approximate Analytical Solution for Laminar Flow Over a Backward Step
IDETC-CIE 2015; V01AT02A001https://doi.org/10.1115/DETC2015-46177
Abstraction of Semantic Mid-Surface Based on Rib-Feature Recognition
IDETC-CIE 2015; V01AT02A003https://doi.org/10.1115/DETC2015-47054
Topics:
Design
,
Finite element analysis
,
Semantics
,
Thin wall structures
Risk-Based Path Planning Optimization Methods for UAVs Over Inhabited Areas
IDETC-CIE 2015; V01AT02A004https://doi.org/10.1115/DETC2015-47407
Topics:
Optimization
,
Path planning
,
Risk
,
Unmanned aerial vehicles
,
Flight
,
Risk assessment
,
Computation
,
Finishes
,
Tradeoffs
Computational Multiphysics Applications
Fundamentals of a Mereo-Operandi Theory to Support Transdisciplinary Modeling and Co-Design of Cyber-Physical Systems
IDETC-CIE 2015; V01AT02A005https://doi.org/10.1115/DETC2015-46702
Topics:
Cyber-physical systems
,
Design
,
Modeling
,
Computer software
,
Hardware
,
Dimensions
,
Flow (Dynamics)
,
Underpinning
Coupled Electrostatic-Structural Analysis Using Mesh Independent Approach
IDETC-CIE 2015; V01AT02A006https://doi.org/10.1115/DETC2015-46865
Preliminary Computation on NOx Emission Reduction for Different Temperatures
IDETC-CIE 2015; V01AT02A007https://doi.org/10.1115/DETC2015-47228
Topics:
Computation
,
Emissions
,
Nitrogen oxides
,
Temperature
,
Combustion
,
Compression
,
Natural gas
,
Combustion chambers
,
Exhaust systems
,
Gas turbines
An Efficient Saddle Point Search Method Using Kriging Metamodels
IDETC-CIE 2015; V01AT02A008https://doi.org/10.1115/DETC2015-47386
Computer-Aided Product and Process Development
Integrated Forming, Welding and Crash Simulations for an Aluminum Crash Management System
IDETC-CIE 2015; V01AT02A009https://doi.org/10.1115/DETC2015-46088
Topics:
Aluminum
,
Simulation
,
Welding
,
Design
,
Heat
,
Deformation
,
Manufacturing
,
Modeling
,
Flow (Dynamics)
,
Fracture (Materials)
Graph Visualization Styles for Use in Configuration Management: A User Study
IDETC-CIE 2015; V01AT02A010https://doi.org/10.1115/DETC2015-46288
Topics:
Visualization
,
Change management
,
Computers
,
Geometry
Plane Recognition on the Basis of Cloud of Points Determined by Photogrammetry
IDETC-CIE 2015; V01AT02A011https://doi.org/10.1115/DETC2015-46310
Topics:
Photogrammetry
,
Algorithms
,
Computer software
,
Machining
,
Casting
,
Clearances (Engineering)
,
Industrial research
Integrating Rule-Based Systems and Data Analytics Tools Using Open Standard PMML
IDETC-CIE 2015; V01AT02A012https://doi.org/10.1115/DETC2015-46412
Topics:
Data mining
,
Expert systems
,
Manufacturing
,
Manufacturing systems
,
Production planning
,
Sensors
Spatial Grammar for Design Synthesis Targeting Perceptions: Case Study on Beauty
IDETC-CIE 2015; V01AT02A013https://doi.org/10.1115/DETC2015-46449
Topics:
Design
,
Computer software
,
Shapes
,
Statistics
Design Repository and Analogy Computation via Unit Language Analysis (DRACULA) Repository Development
IDETC-CIE 2015; V01AT02A014https://doi.org/10.1115/DETC2015-46640
Topics:
Computation
,
Design
,
Algorithms
,
Engineers
,
Databases
,
Storage
Skin Model Shapes: Offering New Potentials for Modelling Product Shape Variability
IDETC-CIE 2015; V01AT02A015https://doi.org/10.1115/DETC2015-46701
Topics:
Modeling
,
Shapes
,
Skin
,
Geometry
,
Computer-aided design
,
Manufacturing
,
Computer-aided engineering
,
Engineering standards
,
Inspection
,
Product design
Geometric Descriptor-Based Local Contour Point Set Matching for Cross-Section Profile Measurement of Automotive Sealing Strips
IDETC-CIE 2015; V01AT02A017https://doi.org/10.1115/DETC2015-47127
Topics:
Sealing (Process)
,
Strips
,
Measurement systems
,
Optimization
,
Rubber products
,
Shapes
,
Stability
Machine Specific Energy Consumption Analysis for CNC-Milling Toolpaths
IDETC-CIE 2015; V01AT02A018https://doi.org/10.1115/DETC2015-48014
Topics:
Computer numerical control machine tools
,
Energy consumption
,
Machinery
,
Milling
,
Machining
,
Computer software
,
Construction
,
Feedback
,
Modeling
Design, Simulation and Optimization for Additive Manufacturing
Conformal 3D Printing of Sensors
IDETC-CIE 2015; V01AT02A019https://doi.org/10.1115/DETC2015-46089
Topics:
Additive manufacturing
,
Sensors
,
Carbon fibers
,
Composite materials
,
Design
,
Electrical resistivity
,
Mechanical properties
,
Resins
,
Stress
,
Testing
Multi-Material Topology Optimization for Additive Manufacturing
IDETC-CIE 2015; V01AT02A020https://doi.org/10.1115/DETC2015-46268
Topics:
Additive manufacturing
,
Optimization
,
Topology
,
Manufacturing
,
Algorithms
,
Design
,
Finite element analysis
Towards Assembly-Free Methods for Additive Manufacturing Simulation
IDETC-CIE 2015; V01AT02A021https://doi.org/10.1115/DETC2015-46356
Modeling and 3D Printing of Ruled Surfaces
IDETC-CIE 2015; V01AT02A022https://doi.org/10.1115/DETC2015-46494
Topics:
Additive manufacturing
,
Modeling
,
Arches
,
Design
,
Engineering disciplines
,
Engineering mathematics
,
Matlab
,
Mechanical engineering
Knowledge Management With an Intelligent Tool for Additive Manufacturing
IDETC-CIE 2015; V01AT02A023https://doi.org/10.1115/DETC2015-46615
Optimization of Additively Manufactured Multi-Material Lattice Structures Using Generalized Optimality Criteria
IDETC-CIE 2015; V01AT02A026https://doi.org/10.1115/DETC2015-47403
Topics:
Additive manufacturing
,
Optimization
,
Tensile strength
,
Trusses (Building)
,
Density
,
Design
,
Displacement
,
Manufacturing
,
Printing
,
Topology
Tolerance Specification and Related Issues for Additively Manufactured Products
IDETC-CIE 2015; V01AT02A027https://doi.org/10.1115/DETC2015-47531
Topics:
Additive manufacturing
,
Geometry
,
Manufacturing
,
Cavities
,
Shapes
Algorithms for Multilayer Conformal Additive Manufacturing
IDETC-CIE 2015; V01AT02A028https://doi.org/10.1115/DETC2015-47596
Topics:
Additive manufacturing
,
Algorithms
,
Dimensions
,
Geometry
,
Laplace equations
,
Printing
A Virtual Reality Application for Additive Manufacturing Process Training
IDETC-CIE 2015; V01AT02A033https://doi.org/10.1115/DETC2015-47807
Optimization of Process Parameters in Laser Engineered Net Shaping (LENS) Deposition of Multi-Materials
IDETC-CIE 2015; V01AT02A034https://doi.org/10.1115/DETC2015-47856
Topics:
Lasers
,
Lenses (Optics)
,
Optimization
,
Manufacturing
,
Pareto optimization
,
Additive manufacturing
,
Algorithms
,
Ceramics
,
Cermets
,
Composite materials
Systematic Dimensional Calibration Process for 3D Printed Parts in Selective Laser Sintering (SLS)
Sangho Ha, Hweeyoung Han, Daeil Kwon, Namhun Kim, Hyeonnam Kim, Cheolwoong Hwang, Hyunshik Shin, Kyujong Park
IDETC-CIE 2015; V01AT02A036https://doi.org/10.1115/DETC2015-47983
Topics:
Additive manufacturing
,
Calibration
,
Lasers
,
Sintering
,
Deformation
,
Polynomials
,
Regression models
,
Thermal expansion
,
Algorithms
,
Computer-aided design
A Finite Element Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology
IDETC-CIE 2015; V01AT02A038https://doi.org/10.1115/DETC2015-48008
Topics:
Finite element analysis
,
Metrology
,
Manufacturing
,
Errors
,
Inspection
Modelling of Cusp Geometry in Additive Manufacturing Parts Using a Piece-Wise Polynomial
IDETC-CIE 2015; V01AT02A039https://doi.org/10.1115/DETC2015-48009
Topics:
Additive manufacturing
,
Geometry
,
Modeling
,
Polynomials
,
Surface roughness
,
Manufacturing
,
Design
,
Errors
,
Resolution (Optics)
,
Stairs
Tensile Properties of Inkjet 3D Printed Parts: Critical Process Parameters and Their Efficient Analysis
IDETC-CIE 2015; V01AT02A040https://doi.org/10.1115/DETC2015-48024
Topics:
Additive manufacturing
,
Tensile strength
,
Mechanical properties
,
Printing
,
Storage
,
Design
,
Experimental design
,
Nozzles
,
Flow (Dynamics)
,
Stress
High Performance Computing, With Emphasis on Advanced Computing Architectures and Cloud Computing
Topology Optimization on the Cloud: A Confluence of Technologies
IDETC-CIE 2015; V01AT02A041https://doi.org/10.1115/DETC2015-46137
Topics:
Optimization
,
Topology
,
Additive manufacturing
,
Aircraft
,
Architecture
,
Automobiles
,
Computer software
,
Finite element analysis
,
Geometry
,
Hardware
Assembly-Free Buckling Analysis for Topology Optimization
IDETC-CIE 2015; V01AT02A042https://doi.org/10.1115/DETC2015-46351
Topics:
Buckling
,
Manufacturing
,
Optimization
,
Topology
,
Degrees of freedom
,
Eigenvalues
Failure Identification for Mission Analysis for Complex Systems
IDETC-CIE 2015; V01AT02A044https://doi.org/10.1115/DETC2015-47599
Topics:
Complex systems
,
Failure
,
Failure analysis
,
Optimization
,
Computer software
,
Design
,
Engineering simulation
,
Failure mechanisms
,
Linkages
,
Matlab
Human Modeling: Methods and Applications in Engineering
Identifying Possible Patient Slips and Falls Using Motion Capture Experiments
IDETC-CIE 2015; V01AT02A047https://doi.org/10.1115/DETC2015-46635
Topics:
Center of mass
,
Computer software
,
Design
,
Dimensions
,
Diseases
,
Education
,
Health care
,
Trajectories (Physics)
,
Wounds
Dynamically Consistent Whole-Body Modeling and Simulation Can Reasonably Predict In Vivo Knee Loads
IDETC-CIE 2015; V01AT02A048https://doi.org/10.1115/DETC2015-46934
Topics:
Knee
,
Modeling
,
Simulation
,
Stress
,
Knee joint prostheses
,
Surgery
,
Cycles
,
Biomedicine
,
Musculoskeletal system
,
Wear
Pedestrian Accident Reconstruction Using a Human Body Finite Element Model
IDETC-CIE 2015; V01AT02A049https://doi.org/10.1115/DETC2015-46969
Topics:
Accidents
,
Finite element model
,
Risk
,
Traumatic brain injury
,
Vehicles
,
Accounting
,
Brain
,
Collisions (Physics)
,
Countermeasures
,
Finite element analysis
Three-Dimensional Tooth Segmentation by Integrating Multiple Ray-Sum Images From CBCT Data
IDETC-CIE 2015; V01AT02A050https://doi.org/10.1115/DETC2015-47197
Topics:
Image segmentation
,
Absorption
,
Biological tissues
,
Bone
,
Computer software
,
Imaging
,
Splines
,
Surgery
A Novel Methodology for the Creation of Customized Eruption Guidance Appliances
IDETC-CIE 2015; V01AT02A052https://doi.org/10.1115/DETC2015-47232
Topics:
Additive manufacturing
,
Biomedicine
,
Computer-aided design
,
Design
,
Finite element methods
,
Geometry
,
Manufacturing
,
Modeling
,
Pressure
,
Rapid prototyping
Computational Metabolic Energy Expenditure Model With Novel Heat Dissipation Formulation
IDETC-CIE 2015; V01AT02A054https://doi.org/10.1115/DETC2015-47728
Topics:
Energy dissipation
,
Heat
,
Kinematics
,
Dynamics (Mechanics)
,
Modeling
,
Multibody systems
,
Muscle
,
Regression analysis
,
Steady state
,
Thermodynamics
Pseudo Elimination of Geometry Dependence in Surrogate Models of Distributed Knee Loads From an Explicit Dynamic Finite Element Analysis
IDETC-CIE 2015; V01AT02A055https://doi.org/10.1115/DETC2015-47850
Topics:
Finite element analysis
,
Geometry
,
Knee
,
Stress
,
Finite element methods
,
Finite element model
,
Wear
,
Arches
,
Knee joint prostheses
,
Mechanical admittance
Towards Automatic Gait Assessment by Means of RGB-D Mocap
IDETC-CIE 2015; V01AT02A057https://doi.org/10.1115/DETC2015-48021
Topics:
Biomedicine
,
Orthopedics
,
Performance
,
Physiology
,
Reliability
,
Sensors
Inverse Problems in Science and Engineering
Towards Real-Time Composite Material Characterization Using Surrogate Models and GPGPU Computing
IDETC-CIE 2015; V01AT02A058https://doi.org/10.1115/DETC2015-46476
Topics:
Composite materials
,
Algorithms
,
Anisotropy
,
Approximation
,
Excitation
,
Noise (Sound)
,
Response surface methodology
,
Robotics
,
Robustness
,
Synchronization
Towards Inverse Estimation of Properties, Process Parameters and Residual Effects for Friction Stir Welding
IDETC-CIE 2015; V01AT02A059https://doi.org/10.1115/DETC2015-46532
Topics:
Friction
,
Welding
,
Deformation
,
Modeling
,
Heat
,
Heat conduction
Towards Crack Trajectory Identification via the Direct Strain Imaging Method
IDETC-CIE 2015; V01AT02A060https://doi.org/10.1115/DETC2015-46536
Topics:
Fracture (Materials)
,
Imaging
,
Trajectories (Physics)
,
Finite element methods
,
Stress
,
Tensors
Towards Identification of Lower Scale Composite Material Properties From Higher Scale Experimental Data via Inverse Analysis of Coupled Multiscale Models
IDETC-CIE 2015; V01AT02A061https://doi.org/10.1115/DETC2015-46538
Topics:
Composite materials
,
Fibers
,
Microscale devices
,
Boundary-value problems
,
Chain
,
Damage
,
Elasticity
,
Laminates
,
Manufacturing
,
Materials properties
Simulation in Advanced Manufacturing
Supporting Optimization of Complex Product Development Processes Through Simulation: A Case-Study of Thick Film Heaters Development Processes
IDETC-CIE 2015; V01AT02A062https://doi.org/10.1115/DETC2015-46021
Topics:
Case studies
,
Optimization
,
Product development
,
Simulation
,
Thick films
,
Finite element analysis
,
Workflow
,
Design
,
Analysis
Containerization Method for Logistic Cost Reduction Based on Closed-Loop Supply Chain Model
IDETC-CIE 2015; V01AT02A063https://doi.org/10.1115/DETC2015-46371
Topics:
Supply chains
,
Containers
,
Flow (Dynamics)
,
Logistics
,
Decision making
,
Maintenance
,
Markov processes
,
Simulation
,
Simulation models
,
Stochastic systems
Modeling the Lamination of a Multilayered Tape Cast Ceramic Component With Fugitive Phases Before Sintering
IDETC-CIE 2015; V01AT02A064https://doi.org/10.1115/DETC2015-47548
Topics:
Industrial ceramics
,
Lamination
,
Modeling
,
Sintering
,
Ceramics
,
Geometry
,
Microchannels
,
Deformation
,
Displacement
,
Pressure gradient
Uncertainty Quantification in Simulation and Model Verification and Validation
Analysis of Hybrid Dynamical Systems With Uncertainty in Initial Conditions
IDETC-CIE 2015; V01AT02A065https://doi.org/10.1115/DETC2015-46111
Topics:
Dynamic systems
,
Uncertainty
,
Uncertainty quantification
,
Autopilots
,
Chemical processes
,
Manufacturing
,
Modeling
,
Pipelines
,
Structures
,
Systems engineering
Stochastic Event Detection in Needle-Tissue Interaction
IDETC-CIE 2015; V01AT02A067https://doi.org/10.1115/DETC2015-47384
Quantification of Model-Form Uncertainty in Drift-Diffusion Simulation Using Fractional Derivatives
IDETC-CIE 2015; V01AT02A068https://doi.org/10.1115/DETC2015-47677
Topics:
Diffusion (Physics)
,
Simulation
,
Uncertainty
,
Modeling
,
Calibration
,
Computation
,
Fokker-Planck equation
,
Optimization
,
Space
,
Uncertainty quantification
Email alerts
Most Read Proceedings Papers in IDETC-CIE
Case Study Method for Design Research: A Justification
IDETC-CIE2008