Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Volume 1A: 34th Computers and Information in Engineering Conference

34th Computers and Information in Engineering Conference

Advanced Modeling and Simulation (General)

An Immersed Boundary Method for Calculating the Relative Viscosity of a Suspension of Rigid Particles

IDETC-CIE 2014; V01AT02A001https://doi.org/10.1115/DETC2014-34061

View Articletitled, An Immersed Boundary Method for Calculating the Relative Viscosity of a Suspension of Rigid Particles

PDF

Topics: Particulate matter , Viscosity , Flow (Dynamics) , Boundary-value problems , Energy consumption , Equations of motion , Fluids , Interpolation , Resolution (Optics) , Shapes

NREL Phase VI Wind Turbine Modeling Using an Unsteady Panel Method

Eugene Grigoriev, Iman Borazjani

IDETC-CIE 2014; V01AT02A002https://doi.org/10.1115/DETC2014-34141

Abstract

View Articletitled, NREL Phase VI Wind Turbine Modeling Using an Unsteady Panel Method

PDF

Topics: Modeling , Wind turbines , Blades , Flow (Dynamics) , Horizontal axis wind turbines , Vortices , Oscillations , Pressure , Thrust , Accounting

T-Spline Based Local Refinement for Mesh Independent Analysis

Ravi K. Burla, Ashok V. Kumar

IDETC-CIE 2014; V01AT02A003https://doi.org/10.1115/DETC2014-34500

Abstract

View Articletitled, T-Spline Based Local Refinement for Mesh Independent Analysis

PDF

Topics: Splines , Boundary-value problems , Approximation , B-splines , Computer-aided design , Construction , Elasticity , Geometry , Interpolation , Junctions

Experimental Study of an Airplane Accident Evacuation/Rescue Simulation Using 3D Kinematic Digital Human Models

Takao Kakizaki, Jiro Urii, Mitsuru Endo

IDETC-CIE 2014; V01AT02A004https://doi.org/10.1115/DETC2014-34537

Abstract

View Articletitled, Experimental Study of an Airplane Accident Evacuation/Rescue Simulation Using 3D Kinematic Digital Human Models

PDF

Topics: Accidents , Aircraft , Evacuations , Kinematics , Simulation , Engineering simulation , Delays , Design , Drills (Tools) , Emergencies

Development of an Information Model for the Integration of Product Design and Sustainability Evaluation

Heng Zhang, Utpal Roy

IDETC-CIE 2014; V01AT02A005https://doi.org/10.1115/DETC2014-34811

Abstract

View Articletitled, Development of an Information Model for the Integration of Product Design and Sustainability Evaluation

PDF

Topics: Information models , Product design , Sustainability , Design , Computer-aided design

Aerodynamic Design of Flat Delta Kite Based on Polhamus Concept of Leading Edge Suction Analogy

Bharath Madduri, Iman Borazjani

IDETC-CIE 2014; V01AT02A006https://doi.org/10.1115/DETC2014-35097

Abstract

View Articletitled, Aerodynamic Design of Flat Delta Kite Based on Polhamus Concept of Leading Edge Suction Analogy

PDF

Topics: Design , Suction , Stress , Vortices , Aerodynamics , Drag (Fluid dynamics) , Flow separation , Fluid-dynamic forces , Potential theory (Physics) , Wind energy

Modal Analysis Using Implicit Boundary Finite Element Methods

Zhiyuan Zhang, Ashok V. Kumar

IDETC-CIE 2014; V01AT02A007https://doi.org/10.1115/DETC2014-35100

Abstract

View Articletitled, Modal Analysis Using Implicit Boundary Finite Element Methods

PDF

Topics: Finite element methods , Modal analysis , Approximation , Boundary-value problems , B-splines , Dynamic analysis , Eigenvalues , Geometry , Mode shapes , Stiffness

New Metrics for Pit Shape Characterization

Virginia G. DeGiorgi, Siddiq M. Qidwai, Nithyanand Kota

IDETC-CIE 2014; V01AT02A008https://doi.org/10.1115/DETC2014-35140

Abstract

View Articletitled, New Metrics for Pit Shape Characterization

PDF

Topics: Shapes , Stress , Stress concentration , Biomedicine , Blood vessels , Corrosion , Geometry

Continuous Solution of Partial Differential Equations on Non-Rectangular and Non-Continuous Geometry

P. Venkataraman

IDETC-CIE 2014; V01AT02A009https://doi.org/10.1115/DETC2014-35148

Abstract

View Articletitled, Continuous Solution of Partial Differential Equations on Non-Rectangular and Non-Continuous Geometry

PDF

Topics: Geometry , Partial differential equations , Errors , Finite element analysis , Boundary-value problems , Differential equations , Finite difference methods , Optimization , Polynomials

Reduced Material Model of Composite Laminates for 3D Finite Element Analysis

Goldy Kumar, Vadim Shapiro

IDETC-CIE 2014; V01AT02A010https://doi.org/10.1115/DETC2014-35230

Abstract

View Articletitled, Reduced Material Model of Composite Laminates for 3D Finite Element Analysis

PDF

Topics: Composite materials , Finite element analysis , Laminates , Shells , Structural analysis , Aerospace industry , Biomedicine , B-splines , Finite element methods , Lamination

Numerical Simulation of Laminar Flow Heat Transfer Enhancement Using Surface Modification

Abhijit S. Paranjape, Ninad C. Maniar, Deval A. Pandya, Brian H. Dennis

IDETC-CIE 2014; V01AT02A011https://doi.org/10.1115/DETC2014-35432

Abstract

View Articletitled, Numerical Simulation of Laminar Flow Heat Transfer Enhancement Using Surface Modification

PDF

Topics: Computer simulation , Heat transfer , Laminar flow , Flow (Dynamics) , Air flow , Computational fluid dynamics , Engineering systems and industry applications , Generators , Heat , Pressure drop

3D Flow Simulations in a Simplified Right Ventricle Model

Varun Vruddhula, Iman Borazjani

IDETC-CIE 2014; V01AT02A012https://doi.org/10.1115/DETC2014-35476

Abstract

View Articletitled, 3D Flow Simulations in a Simplified Right Ventricle Model

PDF

Topics: Absorption , Blood , Blood flow , Computer simulation , Engineering simulation , Flow (Dynamics) , Flow simulation , Geometry , Imaging , Lung

The Development of a Homecare Platform to Support Informal Caregivers

Yu Song

IDETC-CIE 2014; V01AT02A013https://doi.org/10.1115/DETC2014-35658

Abstract

View Articletitled, The Development of a Homecare Platform to Support Informal Caregivers

PDF

Topics: Collapse , Databases , Design , Diseases , Health systems , Patient monitoring , Security , Wireless sensor networks

AMS: Computational Multiphysics Applications

Multi-Physics Simulation Based Design and Analysis of a High Speed Aerostatic Spindle and its Performance Assessment

Siyu Gao, Kai Cheng, Hui Ding

IDETC-CIE 2014; V01AT02A014https://doi.org/10.1115/DETC2014-34086

Abstract

View Articletitled, Multi-Physics Simulation Based Design and Analysis of a High Speed Aerostatic Spindle and its Performance Assessment

PDF

Topics: Design , Physics , Simulation , Modeling , Bearings , Computational fluid dynamics , Finite element analysis , Heat , Heat sinks , Heat transfer

Stress-Constrained Thermo-Elastic Topology Optimization: A Topological Sensitivity Approach

Shiguang Deng, Krishnan Suresh, James Joo

IDETC-CIE 2014; V01AT02A015https://doi.org/10.1115/DETC2014-34385

Abstract

View Articletitled, Stress-Constrained Thermo-Elastic Topology Optimization: A Topological Sensitivity Approach

PDF

Topics: Optimization , Stress , Thermoelasticity , Topology , Materials properties , Aerodynamics , Aircraft , Approximation , Fluid-dynamic forces , Stiffness

Performance of a Lotka-Volterra System for Representing Biofouling Processes

Foteini Komninelli, Athanasios Iliopoulos, John G. Michopoulos

IDETC-CIE 2014; V01AT02A016https://doi.org/10.1115/DETC2014-35002

Abstract

View Articletitled, Performance of a Lotka-Volterra System for Representing Biofouling Processes

PDF

Topics: Biofouling , Spatiotemporal phenomena , Finite element analysis

On the Validation of a Multiphysics Theory for a Static Contact With Rough Surfaces

John G. Michopoulos, Marcus Young, Athanasios Iliopoulos, Harry N. Jones

IDETC-CIE 2014; V01AT02A017https://doi.org/10.1115/DETC2014-35180

Abstract

View Articletitled, On the Validation of a Multiphysics Theory for a Static Contact With Rough Surfaces

PDF

Topics: Surface roughness , Contact resistance , Cylinders , Disks , Electric current , Partial differential equations , Physics , Pressure , Simulation , Spatiotemporal phenomena

Towards a Computational Multiphysics Framework for Modeling Antibiofouling Processes

Athanasios Iliopoulos, John G. Michopoulos, Virginia DeGiorgi, Steven Policastro

IDETC-CIE 2014; V01AT02A018https://doi.org/10.1115/DETC2014-35401

Abstract

View Articletitled, Towards a Computational Multiphysics Framework for Modeling Antibiofouling Processes

PDF

Topics: Biofouling , Boats , Cathodic protection , Chemical reactions , Design methodology , Drag (Fluid dynamics) , Electric current , Electrodiffusion , Fuel consumption , Maintenance

AMS: High Performance Computing, With Emphasis on Advanced Computing Architectures and Cloud Computing

Parallel Implementation of Periodic Boundary Conditions for a Curvilinear Immersed Boundary Method

Mohsen Daghooghi, Iman Borazjani

IDETC-CIE 2014; V01AT02A019https://doi.org/10.1115/DETC2014-34069

Abstract

View Articletitled, Parallel Implementation of Periodic Boundary Conditions for a Curvilinear Immersed Boundary Method

PDF

Topics: Boundary-value problems , Algorithms , Engineering simulation , Flow (Dynamics) , Navier-Stokes equations , Resolution (Optics) , Simulation

A Fast Time-Stepping Strategy for the Newmark-Beta Method

Amir M. Mirzendehdel, Krishnan Suresh

IDETC-CIE 2014; V01AT02A020https://doi.org/10.1115/DETC2014-34387

Abstract

View Articletitled, A Fast Time-Stepping Strategy for the Newmark-Beta Method

PDF

Topics: Architecture , Finite element analysis , Linear systems , Manufacturing , Structural dynamics

Limited-Memory Deflated Conjugate Gradient for Solid Mechanics

Praveen Yadav, Krishnan Suresh

IDETC-CIE 2014; V01AT02A021https://doi.org/10.1115/DETC2014-34393

Abstract

View Articletitled, Limited-Memory Deflated Conjugate Gradient for Solid Mechanics

PDF

Topics: Solid mechanics , Agglomeration (Materials) , Linear systems , Architecture , Degrees of freedom , Finite element analysis , Graphics processing units , Manufacturing , Numerical analysis , Plates (structures)

High Performance Parallelized Centroid Estimation of Image Components for Full Field Measurements

Athanasios Iliopoulos, John G. Michopoulos

IDETC-CIE 2014; V01AT02A022https://doi.org/10.1115/DETC2014-34937

Abstract

View Articletitled, High Performance Parallelized Centroid Estimation of Image Components for Full Field Measurements

PDF

Topics: Algorithms , Architecture , Displacement , Flow (Dynamics) , Image processing , Strain measurement

Preliminary Study in Parallel Simulation of Equation-Based System-Level Physical Models

Yan Zhao, Liping Chen, Jianwan Ding, Jianjun Zhao

IDETC-CIE 2014; V01AT02A023https://doi.org/10.1115/DETC2014-35676

Abstract

View Articletitled, Preliminary Study in Parallel Simulation of Equation-Based System-Level Physical Models

PDF

Topics: Simulation , Algorithms

AMS: Inverse Problems in Science and Engineering

Shape Identification for Controlling the Static Deformation of Frame Structures

Koki Kameyama, Masatoshi Shimoda, Takashi Morimoto

IDETC-CIE 2014; V01AT02A024https://doi.org/10.1115/DETC2014-34265

Abstract

View Articletitled, Shape Identification for Controlling the Static Deformation of Frame Structures

PDF

Topics: Deformation , Shapes , Design , Errors , Gradient methods , Shape optimization , Stiffness , Variational techniques

A Design Method of Beads in Shell Structure Using Non-Parametric Shape Optimization Method

Kohei Shintani, Hideyuki Azegami

IDETC-CIE 2014; V01AT02A025https://doi.org/10.1115/DETC2014-34572

Abstract

View Articletitled, A Design Method of Beads in Shell Structure Using Non-Parametric Shape Optimization Method

PDF

Topics: Design methodology , Shape optimization , Shells , Design , Algorithms , Gradient methods , Shapes , Stiffness

Inverse Determination of Moving Heat Flux Distributions Using Reduced Order Models

Brian H. Dennis, Ashkan Akbariyeh, John Michopoulos, Foteini Komninelli, Athanasios Iliopoulos

IDETC-CIE 2014; V01AT02A026https://doi.org/10.1115/DETC2014-35274

Abstract

View Articletitled, Inverse Determination of Moving Heat Flux Distributions Using Reduced Order Models

PDF

Topics: Heat flux , Finite element model , Optimization , Temperature , Inverse problems , Differential equations , Galerkin method , Heat transfer , Optimization algorithms , Parameter estimation

Performance of Reduced Order Models of Moving Heat Source Deposition Problems for Efficient Inverse Analysis

John G. Michopoulos, Brian Dennis, Foteini Komninelli, Athanasios Iliopoulos, Ashkan Akbariyeh

IDETC-CIE 2014; V01AT02A027https://doi.org/10.1115/DETC2014-35365

Abstract

View Articletitled, Performance of Reduced Order Models of Moving Heat Source Deposition Problems for Efficient Inverse Analysis

PDF

Topics: Heat , Finite element analysis , Heat transfer , Performance characterization , Principal component analysis , Sensitivity analysis

Micro-Scale Friction Model for Elastomers Considering Temperature Dependent Criterion for Wave Length Limit and Contribution of Adhesive Friction

Erfan Afrasiabi, Francesco Braghin, Massimiliano Maggioni, Edoardo Sabbioni

IDETC-CIE 2014; V01AT02A028https://doi.org/10.1115/DETC2014-35637

Abstract

View Articletitled, Micro-Scale Friction Model for Elastomers Considering Temperature Dependent Criterion for Wave Length Limit and Contribution of Adhesive Friction

PDF

Topics: Adhesives , Elastomers , Friction , Microscale devices , Temperature , Waves , Rubber , Sensitivity analysis , Tires

AMS: Modeling and Simulation of Humans in Engineering

Joint-Space Dynamic Model of Metabolic Cost With Subject-Specific Energetic Parameters

Dustyn Roberts, Howard Hillstrom, Joo H. Kim

IDETC-CIE 2014; V01AT02A029https://doi.org/10.1115/DETC2014-34192

Abstract

View Articletitled, Joint-Space Dynamic Model of Metabolic Cost With Subject-Specific Energetic Parameters

PDF

Topics: Dynamic models , Muscle , Dynamics (Mechanics) , Experimental methods , Multibody systems , Optimization algorithms , Reliability , Thermodynamics

Effect of Uncertainty on Human Posture Prediction

Ning Li, James Yang

IDETC-CIE 2014; V01AT02A030https://doi.org/10.1115/DETC2014-34232

Abstract

View Articletitled, Effect of Uncertainty on Human Posture Prediction

PDF

Topics: Uncertainty , Optimization , Simulation , Center of mass , Computer software , Design , Gaussian distribution , Inertia (Mechanics) , Modeling , Reliability

Compensating for Operational Uncertainty in Man-Machine Systems: A Case Study on Intelligent Vehicle Parking Assist

Dale Su, Kuei-Yuan Chan

IDETC-CIE 2014; V01AT02A031https://doi.org/10.1115/DETC2014-34252

Abstract

View Articletitled, Compensating for Operational Uncertainty in Man-Machine Systems: A Case Study on Intelligent Vehicle Parking Assist

PDF

Topics: Human-machine systems , Uncertainty , Vehicles , Reliability , Cities , Machinery , Errors , Space

Human Stair Ascent and Descent Simulations

Yujiang Xiang, Joo H. Kim, Hyun-Joon Chung, James Yang, Hyun-Jung Kwon

IDETC-CIE 2014; V01AT02A032https://doi.org/10.1115/DETC2014-34324

Abstract

View Articletitled, Human Stair Ascent and Descent Simulations

PDF

Topics: Engineering simulation , Simulation , Stairs , Dynamics (Mechanics) , Degrees of freedom , Design , Optimization , Prostheses , Weapons

In-Vivo Obstetric Pressure Measurements for Patient-Specific Epidural Simulator

Neil Vaughan, Venketesh N. Dubey, Michael Y. K. Wee, Richard Isaacs

IDETC-CIE 2014; V01AT02A033https://doi.org/10.1115/DETC2014-35427

Abstract

View Articletitled, In-Vivo Obstetric Pressure Measurements for Patient-Specific Epidural Simulator

PDF

Topics: Pressure measurement , Pressure , Magnetic resonance imaging , Needles , Shapes , Ultrasound , Biological tissues , Measurement systems , Thickness measurement

AMS: Simulation in Manufacturing

Explicit Dynamics Analysis for Harmonic Drives

Zhiyuan Yu, Kwun-Lon Ting

IDETC-CIE 2014; V01AT02A034https://doi.org/10.1115/DETC2014-34759

Abstract

View Articletitled, Explicit Dynamics Analysis for Harmonic Drives

PDF

Topics: Dynamics (Mechanics) , Algorithms , Deformation , Elasticity , Fatigue life , Gears , Mechanical drives , Simulation models , Stress , Stress concentration

A Qualitative Failure Analysis Using Function-Based Performance State-Machines for Fault Identification and Propagation During Early Design Phases

Charlie B. DeStefano, David C. Jensen

IDETC-CIE 2014; V01AT02A035https://doi.org/10.1115/DETC2014-34803

Abstract

View Articletitled, A Qualitative Failure Analysis Using Function-Based Performance State-Machines for Fault Identification and Propagation During Early Design Phases

PDF

Topics: Design , Failure analysis , Machinery , Failure , Complex systems , DNA , Failure mechanisms , Manufacturing , Risk , Safety

Influence of the Number of AGVs on Products Conveyance Efficiency in AGV Transportation System Based on Knowledge of Taxis

Tsuguhito Suzuki, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, Taichi Ito

IDETC-CIE 2014; V01AT02A036https://doi.org/10.1115/DETC2014-34873

Abstract

View Articletitled, Influence of the Number of AGVs on Products Conveyance Efficiency in AGV Transportation System Based on Knowledge of Taxis

PDF

Topics: Automated guided vehicles , Transportation systems , Collisions (Physics) , Flexible manufacturing systems , Traffic engineering , Manufacturing systems , Plant layout , Risk , Stress , Traffic

Three Dimensional Modeling of the Lamination of Unfired Ceramics With Fugitive Phases

Stephanie A. Wimmer, Ming-Jen Pan, Virginia G. DeGiorgi

IDETC-CIE 2014; V01AT02A037https://doi.org/10.1115/DETC2014-34986

Abstract

View Articletitled, Three Dimensional Modeling of the Lamination of Unfired Ceramics With Fugitive Phases

PDF

Topics: Ceramics , Lamination , Three-dimensional modeling , Industrial ceramics , Deformation , Pressure gradient , Compression , Engineering simulation , Manufacturing , Pressure

Modeling Laser Travel and its Effects on Temperature Evolution in Laser Hardening of Hypoeutectoid Steel

Suhash Ghosh, Chittaranjan Sahay

IDETC-CIE 2014; V01AT02A038https://doi.org/10.1115/DETC2014-35136

Abstract

View Articletitled, Modeling Laser Travel and its Effects on Temperature Evolution in Laser Hardening of Hypoeutectoid Steel

PDF

Topics: Laser hardening , Lasers , Modeling , Steel , Temperature , Heat , Stress , Alloys , Approximation , Boundary-value problems

AMS: Uncertainty Quantification in Simulation and Model Verification and Validation

A Generalized “Max-Min” Sample for Reliability Assessment With Dependent Variables

Sylvain Lacaze, Samy Missoum

IDETC-CIE 2014; V01AT02A039https://doi.org/10.1115/DETC2014-34051

Abstract

View Articletitled, A Generalized “Max-Min” Sample for Reliability Assessment With Dependent Variables

PDF

Topics: Reliability , Probability , Failure , Density , Approximation , Design , Errors , Space , Support vector machines , Uncertainty

A Kalman Filtering Mechanism Based on Generalized Interval Probability and its Application in Process Variation Estimation

Jie Hu, Yan Wang, Aiguo Cheng, Zhihua Zhong

IDETC-CIE 2014; V01AT02A040https://doi.org/10.1115/DETC2014-34543

Abstract

View Articletitled, A Kalman Filtering Mechanism Based on Generalized Interval Probability and its Application in Process Variation Estimation

PDF

Topics: Filtration , Probability , Errors , Kalman filters , Noise (Sound) , Gaussian distribution , Manufacturing

State of Charge Estimation of Lithium-Ion Batteries Considering Model Bias and Parameter Uncertainties

Zhimin Xi, Rong Jing, Xiaoguang Yang, Ed Decker

IDETC-CIE 2014; V01AT02A041https://doi.org/10.1115/DETC2014-35010

Abstract

View Articletitled, State of Charge Estimation of Lithium-Ion Batteries Considering Model Bias and Parameter Uncertainties

PDF

Topics: Lithium-ion batteries , Uncertainty , Batteries

Multiscale Model Validation Based on Generalized Interval Bayes’ Rule and its Application in Molecular Dynamics Simulation

Aaron E. Tallman, Joel D. Blumer, Yan Wang, David L. McDowell

IDETC-CIE 2014; V01AT02A042https://doi.org/10.1115/DETC2014-35126

Abstract

View Articletitled, Multiscale Model Validation Based on Generalized Interval Bayes’ Rule and its Application in Molecular Dynamics Simulation

PDF

Topics: Model validation , Molecular dynamics simulation , Uncertainty , Chaos , Irradiation (Radiation exposure) , Materials science , Probability , Simulation

AMS/SEIKM: Design and Simulation for Additive Manufacturing

Computational Geometric Solutions for Efficient Additive Manufacturing Process Planning

Anoop Verma, Rahul Rai

IDETC-CIE 2014; V01AT02A043https://doi.org/10.1115/DETC2014-34067

Abstract

View Articletitled, Computational Geometric Solutions for Efficient Additive Manufacturing Process Planning

PDF

Topics: Additive manufacturing , Production planning , Manufacturing , Shapes , Printing

Manufacturability Feedback and Model Correction for Additive Manufacturing

Saigopal Nelaturi, Walter Kim, Arvind Rangarajan, Tolga Kurtoglu

IDETC-CIE 2014; V01AT02A044https://doi.org/10.1115/DETC2014-34222

Abstract

View Articletitled, Manufacturability Feedback and Model Correction for Additive Manufacturing

PDF

Topics: Additive manufacturing , Feedback , Printing , Shapes , Design , Manufacturing , Resolution (Optics)

Efficient Microstructural Design for Additive Manufacturing

Krishnan Suresh

IDETC-CIE 2014; V01AT02A045https://doi.org/10.1115/DETC2014-34383

Abstract

View Articletitled, Efficient Microstructural Design for Additive Manufacturing

PDF

Topics: Additive manufacturing , Design , Optimization , Topology , Degrees of freedom , Graphics processing units , Manufacturing

3D Reconstruction of the Left Ventricle From Four Echocardiographic Projections

Navaneetha Krishnan Rajan, Zeying Song, Kenneth R. Hoffmann, Marek Belohlavek, Eileen M. McMahon, Iman Borazjani

IDETC-CIE 2014; V01AT02A046https://doi.org/10.1115/DETC2014-34463

Abstract

View Articletitled, 3D Reconstruction of the Left Ventricle From Four Echocardiographic Projections

PDF

Topics: Blood , Computer simulation , Echocardiography , Echoes , Flow (Dynamics) , Geometry , Lung , Pumps , Simulation , Valves

Design of Truss-Like Cellular Structures Using Relative Density Mapping Method

Mahmoud A. Alzahrani, Seung-Kyum Choi, David W. Rosen

IDETC-CIE 2014; V01AT02A047https://doi.org/10.1115/DETC2014-34566

Abstract

View Articletitled, Design of Truss-Like Cellular Structures Using Relative Density Mapping Method

PDF

Topics: Density , Design , Trusses (Building) , Optimization , Topology , Additive manufacturing , Design methodology , Engineering design processes , Shapes , Simulation

Effective Mechanical Properties of Lattice Material Fabricated by Material Extrusion Additive Manufacturing

Sang-In Park, David W. Rosen, Seung-kyum Choi, Chad E. Duty

IDETC-CIE 2014; V01AT02A048https://doi.org/10.1115/DETC2014-34683

Abstract

View Articletitled, Effective Mechanical Properties of Lattice Material Fabricated by Material Extrusion Additive Manufacturing

PDF

Topics: Additive manufacturing , Extruding , Mechanical properties , Structural elements (Construction) , Periodic structures

Curing Temperature Study for Curl Distortion Control and Simulation in Projection Based Stereolithography

Kai Xu, Yong Chen

IDETC-CIE 2014; V01AT02A049https://doi.org/10.1115/DETC2014-34908

Abstract

View Articletitled, Curing Temperature Study for Curl Distortion Control and Simulation in Projection Based Stereolithography

PDF

Topics: Hardening (Curing) , Simulation , Stereolithography , Temperature , Mask image projection stereolithography , Cooling , Polymerization , Resolution (Optics) , Shrinkage (Materials)

Multiphysics Challenges for Controlling Layered Manufacturing Processes Targeting Thermomechanical Performance

John G. Michopoulos, Samuel Lambrakos, Athanasios Iliopoulos

IDETC-CIE 2014; V01AT02A050https://doi.org/10.1115/DETC2014-35170

Abstract

View Articletitled, Multiphysics Challenges for Controlling Layered Manufacturing Processes Targeting Thermomechanical Performance

PDF

Topics: Additive manufacturing , Design , Heat transfer , Manufacturing , Modeling , Multiscale modeling , Ontologies , Process control , Simulation , Thermomechanics

Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models

Paul Witherell, Shaw C. Feng, Timothy W. Simpson, David B. Saint John, Pan Michaleris, Zi-Kui Liu, Long-Qing Chen, Rich Martukanitz

IDETC-CIE 2014; V01AT02A051https://doi.org/10.1115/DETC2014-35409

Abstract

View Articletitled, Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models

PDF

Topics: Additive manufacturing , Modeling , Simulation , Model development , Manufacturing , Metal powders

Effect of Adaptive Slicing on Surface Integrity in Additive Manufacturing

S. Sikder, Ahmad Barari, H. A. Kishawy

IDETC-CIE 2014; V01AT02A052https://doi.org/10.1115/DETC2014-35559

Abstract

View Articletitled, Effect of Adaptive Slicing on Surface Integrity in Additive Manufacturing

PDF

Topics: Additive manufacturing , Algorithms , Computer-aided design , Errors , Lithography , Machinery , Uncertainty

Computer-Aided Product and Process Development (General)

A Generic Approach to Modeling Geometry of Un-Deformed Chip by Mathematical Representing Envelopes of Swept Cutter in Five-Axis CNC Milling

Zhiyong Chang, Zezhong C. Chen, Jie Zhao, Dinghua Zhang

IDETC-CIE 2014; V01AT02A053https://doi.org/10.1115/DETC2014-34135

Abstract

View Articletitled, A Generic Approach to Modeling Geometry of Un-Deformed Chip by Mathematical Representing Envelopes of Swept Cutter in Five-Axis CNC Milling

PDF

Topics: Computer numerical control machine tools , Geometry , Milling , Modeling , Kinematics , Algorithms , Chain , Cutting , Interpolation , Machine tools

Development of a Design for Manufacturing Rules Database for Use in Instruction of DFM Practices

Keith Phelan, Crystal Wilson, Joshua D. Summers

IDETC-CIE 2014; V01AT02A054https://doi.org/10.1115/DETC2014-34187

Abstract

View Articletitled, Development of a Design for Manufacturing Rules Database for Use in Instruction of DFM Practices

PDF

Topics: Databases , Design for Manufacturing , Design , Education , Engineering design , Engineering design processes

Tolerance Analysis for Validating Manufacturing Process Plans

Wentao Fu, Saigopal Nelaturi, Arvind Rangarajan, Tolga Kurtoglu

IDETC-CIE 2014; V01AT02A055https://doi.org/10.1115/DETC2014-34329

Abstract

View Articletitled, Tolerance Analysis for Validating Manufacturing Process Plans

PDF

Topics: Manufacturing , Tolerance analysis , Errors , Design , Degrees of freedom , Production planning , Tooling

Developing CAD/CAM Techniques for Machining Unexpanded Honeycomb Core

Derek Yip-Hoi

IDETC-CIE 2014; V01AT02A056https://doi.org/10.1115/DETC2014-34446

Abstract

View Articletitled, Developing CAD/CAM Techniques for Machining Unexpanded Honeycomb Core

PDF

Topics: Computer-aided design , Honeycomb structures , Machining , Composite materials , Aerospace industry , Blades , Damping , Errors , Failure , Fillers (Materials)

Integrated Part Classification for Product Cost and Complexity Reduction

Babu K. Nagiligari, Jimish Shah, Zhenghui Sha, Sathishkumar Thirugnanam, Anurag Jain, Jitesh Panchal

IDETC-CIE 2014; V01AT02A057https://doi.org/10.1115/DETC2014-34492

Abstract

View Articletitled, Integrated Part Classification for Product Cost and Complexity Reduction

PDF

Topics: Cycles , Databases , Decision making , Design , Economics , Maintenance , Manufacturing , Manufacturing industry , Modeling , Product design

A STEP-Based Approach Toward Cooperative Product Design for Sustainability

Yunpeng Li, Utpal Roy

IDETC-CIE 2014; V01AT02A058https://doi.org/10.1115/DETC2014-34510

Abstract

View Articletitled, A STEP-Based Approach Toward Cooperative Product Design for Sustainability

PDF

Topics: Product design , Sustainability , Computer-aided design , Computer-aided engineering , Computation , Cycles , Data collection , Databases , Design , Engineering simulation

Multi-Scale, Heterogeneous CAD Representation for Metal Alloy Microstructures

David W. Rosen

IDETC-CIE 2014; V01AT02A059https://doi.org/10.1115/DETC2014-34563

Abstract

View Articletitled, Multi-Scale, Heterogeneous CAD Representation for Metal Alloy Microstructures

PDF

Topics: Alloys , Computer-aided design , Algorithms , Rendering

Parallel Strategy of FMBEM for 3D Elastostatics and its GPU Implementation Using CUDA

Zhaohui Xia, Qifu Wang, Yunbao Huang, Wei Yixiong, Wang Yingjun

IDETC-CIE 2014; V01AT02A060https://doi.org/10.1115/DETC2014-34587

Abstract

View Articletitled, Parallel Strategy of FMBEM for 3D Elastostatics and its GPU Implementation Using CUDA

PDF

Topics: Graphics processing units , Boundary element methods , Computer-aided design , Finite element methods , Algorithms , Boundary-value problems , Mesh generation , Product design

Concept for an Integrated Workflow Planning of Dental Products Based on Federative Data Management

Reinhard Heister, Reiner Anderl

IDETC-CIE 2014; V01AT02A061https://doi.org/10.1115/DETC2014-34685

Abstract

View Articletitled, Concept for an Integrated Workflow Planning of Dental Products Based on Federative Data Management

PDF

Topics: Workflow , Computer-aided design , Errors , Information models , Milling , Collaboration , Filtration , Manufacturing , Mass production , Milling machines

A Framework of CAD/CAE Integration System and its Implementation for Container Crane

Xi Chen, Hua Li, Lin You, Chonghua Wang

IDETC-CIE 2014; V01AT02A062https://doi.org/10.1115/DETC2014-34717

Abstract

View Articletitled, A Framework of CAD/CAE Integration System and its Implementation for Container Crane

PDF

Topics: Computer-aided design , Computer-aided engineering , Containers , Cranes , Design , Finite element analysis , Software design , Three-dimensional models

Least Levels Disassembly Graph Method for Selective Disassembly Planning

Chenggang Wang, Peter Mitrouchev, Guiqin Li, Lixin Lu

IDETC-CIE 2014; V01AT02A063https://doi.org/10.1115/DETC2014-34943

Abstract

View Articletitled, Least Levels Disassembly Graph Method for Selective Disassembly Planning

PDF

Topics: Collisions (Physics) , Computation

Adaptive Surrogate-Model Fitting Using Error Monotonicity

John Steuben, Cameron Turner

IDETC-CIE 2014; V01AT02A064https://doi.org/10.1115/DETC2014-35037

Abstract

View Articletitled, Adaptive Surrogate-Model Fitting Using Error Monotonicity

PDF

Topics: Errors , Fittings , Design , Algorithms , B-splines , Engineering design , Engineering systems and industry applications , Error functions , Interpolation , Polynomials

A Conceptual Design and Modeling Approach for Determining the Revised Energy Generation Potential due to Site Obstructions for Micro-Scale Wind Turbines

Keith Hurdelbrink, II, Zahed Siddique

IDETC-CIE 2014; V01AT02A065https://doi.org/10.1115/DETC2014-35124

Abstract

View Articletitled, A Conceptual Design and Modeling Approach for Determining the Revised Energy Generation Potential due to Site Obstructions for Micro-Scale Wind Turbines

PDF

Topics: Conceptual design , Energy generation , Microscale devices , Modeling , Wind turbines , Design , Wind energy , Energy harvesting , Simulation , Computational fluid dynamics

Frameworks for Organizing Design Performance Metrics

Briana Lucero, Peter Ngo, Julie Linsey, Cameron J. Turner

IDETC-CIE 2014; V01AT02A066https://doi.org/10.1115/DETC2014-35135

Abstract

View Articletitled, Frameworks for Organizing Design Performance Metrics

PDF

Topics: Design , Control theory , Engineering design , Flow (Dynamics)

User Defined Assembly Features and Pattern Recognition From STEP AP203

Prabath Vemulapalli, Prashant Mohan, Jami J. Shah, Joseph K. Davidson

IDETC-CIE 2014; V01AT02A067https://doi.org/10.1115/DETC2014-35295

Abstract

View Articletitled, User Defined Assembly Features and Pattern Recognition From STEP AP203

PDF

Topics: Manufacturing , Pattern recognition , Algorithms , Design

A Novel Low-Cost Stereolithography Process Based on Vector Scanning and Mask Projection for High-Accuracy, High-Speed, High-Throughput and Large-Area Fabrication

Chi Zhou, Hang Ye, Feng Zhang

IDETC-CIE 2014; V01AT02A068https://doi.org/10.1115/DETC2014-35384

Abstract

View Articletitled, A Novel Low-Cost Stereolithography Process Based on Vector Scanning and Mask Projection for High-Accuracy, High-Speed, High-Throughput and Large-Area Fabrication

PDF

Topics: Manufacturing , Stereolithography , Lasers , Surface quality , Additive manufacturing , Algorithms , Resolution (Optics) , Surface finishing

Incremental Geometric Modeling and Mask Synthesis for Surface Micromachined MEMS

Jianhua Li, Hao Ling, Zhengchun Du

IDETC-CIE 2014; V01AT02A069https://doi.org/10.1115/DETC2014-35558

Abstract

View Articletitled, Incremental Geometric Modeling and Mask Synthesis for Surface Micromachined MEMS

PDF

Topics: Geometric modeling , Microelectromechanical systems , Micromachining , Modeling , Design , Geometry , Maintenance

An Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology Using Harmonic Function Properties

Saeed Jamiolahmadi, Ahmad Barari

IDETC-CIE 2014; V01AT02A070https://doi.org/10.1115/DETC2014-35575

Abstract

View Articletitled, An Approach to Estimate the Detailed Deviation Zone in Coordinate Metrology Using Harmonic Function Properties

PDF

Topics: Metrology , Manufacturing , Errors , Inspection , Laplace equations

Graph Based Representation and Analyses for Conceptual Stages

Eric Coatanéa, Sarayut Nonsiri, Francois Christophe, Faisal Mokammel

IDETC-CIE 2014; V01AT02A071https://doi.org/10.1115/DETC2014-35652

Abstract

View Articletitled, Graph Based Representation and Analyses for Conceptual Stages

PDF

Topics: Brain , Creativity , Design , Engineering design processes , Engineering teachers , Engineers , Modeling , Pressure , Teams

CAPPD: Digital Human Modeling for Engineering Application

Construction of a General Motion Editing System for Human Body and Humanoid Robots

Ming-June Tsai, Jai-Hong Chao, Tzu-Wei Yang

IDETC-CIE 2014; V01AT02A072https://doi.org/10.1115/DETC2014-34118

Abstract

View Articletitled, Construction of a General Motion Editing System for Human Body and Humanoid Robots

PDF

Topics: Computer software , Construction , Humanoid robots , Interpolation , Teaching , User interfaces

3D Reconstruction of Individual Tooth Shapes by Integrating Dental CAD Templates and Patient-Specific Anatomy

Sandro Barone, Alessandro Paoli, Armando V. Razionale, Roberto Savignano

IDETC-CIE 2014; V01AT02A073https://doi.org/10.1115/DETC2014-34362

Abstract

View Articletitled, 3D Reconstruction of Individual Tooth Shapes by Integrating Dental CAD Templates and Patient-Specific Anatomy

PDF

Topics: Anatomy , Computer-aided design , Shapes , Radiation (Physics) , Geometry , Patient treatment , X-rays

Digital Human Modelling to Analyse Virtual Amputee’s Interaction With the Prosthesis

Roberto Morotti, Caterina Rizzi, Daniele Regazzoni, Giorgio Colombo

IDETC-CIE 2014; V01AT02A074https://doi.org/10.1115/DETC2014-34381

Abstract

View Articletitled, Digital Human Modelling to Analyse Virtual Amputee’s Interaction With the Prosthesis

PDF

Topics: Modeling , Prostheses , Simulation , Design , Finite element analysis , Numerical analysis

Effect of Foot Location on Human Running Prediction

Hyun-Joon Chung, Rajan Bhatt, Yujiang Xiang, Jasbir S. Arora, Karim Abdel-Malek

IDETC-CIE 2014; V01AT02A075https://doi.org/10.1115/DETC2014-34401

Abstract

View Articletitled, Effect of Foot Location on Human Running Prediction

PDF

Topics: Degrees of freedom , Dynamics (Mechanics) , Impulse (Physics) , Torque , Yaw

Motion Analysis as an Evaluation Framework for Eye-Hand Coordination: A Case Study in Ultrasound-Guided Catheter Insertion

Inki Kim, Scarlett R. Miller, Andris Freivalds

IDETC-CIE 2014; V01AT02A076https://doi.org/10.1115/DETC2014-34575

Abstract

View Articletitled, Motion Analysis as an Evaluation Framework for Eye-Hand Coordination: A Case Study in Ultrasound-Guided Catheter Insertion

PDF

Topics: Catheters , Ultrasound , Surgery , Errors , Safety

Computing Carbon Dioxide and Humidity in Filtering Facepiece Respirator Cavity During Breathing Cycles

Zhipeng Lei, James Yang

IDETC-CIE 2014; V01AT02A077https://doi.org/10.1115/DETC2014-34660

Abstract

View Articletitled, Computing Carbon Dioxide and Humidity in Filtering Facepiece Respirator Cavity During Breathing Cycles

PDF

Topics: Carbon dioxide , Cavities , Filtration , Respirators , Respiratory cycle , Flow (Dynamics) , Computational fluid dynamics , Water , Air flow , Finite element analysis

A Framework for Hybrid Cells That Support Safe and Efficient Human-Robot Collaboration in Assembly Operations

Carlos W. Morato, Krishnanand N. Kaipa, Jiashun Liu, Satyandra K. Gupta

IDETC-CIE 2014; V01AT02A078https://doi.org/10.1115/DETC2014-34671

Abstract

View Articletitled, A Framework for Hybrid Cells That Support Safe and Efficient Human-Robot Collaboration in Assembly Operations

PDF

Topics: Collaboration , Manufacturing , Robots , Design

Quantifying Emotional States Based on Body Language Data Using Non Invasive Sensors

Ishan Behoora, Conrad S. Tucker

IDETC-CIE 2014; V01AT02A079https://doi.org/10.1115/DETC2014-34770

Abstract

View Articletitled, Quantifying Emotional States Based on Body Language Data Using Non Invasive Sensors

PDF

Topics: Sensors , Data mining , Education , Feedback , Machine learning

Toward Patient-Specific Computational Study of Aortic Diseases: A Population Based Shape Modeling Approach

Kang Li, Xiaoping Qian, Caitlin Martin, Wei Sun

IDETC-CIE 2014; V01AT02A080https://doi.org/10.1115/DETC2014-34789

Abstract

View Articletitled, Toward Patient-Specific Computational Study of Aortic Diseases: A Population Based Shape Modeling Approach

PDF

Topics: Diseases , Modeling , Shapes , Aorta , B-splines , Computerized tomography , Imaging

FEM Analysis of Bone-Ligaments-Tooth Models for Biomechanical Simulation of Individual Orthodontic Devices

Roberto Savignano, Sandro Barone, Alessandro Paoli, Armando V. Razionale

IDETC-CIE 2014; V01AT02A081https://doi.org/10.1115/DETC2014-34912

Abstract

View Articletitled, FEM Analysis of Bone-Ligaments-Tooth Models for Biomechanical Simulation of Individual Orthodontic Devices

PDF

Topics: Biomechanics , Bone , Finite element methods , Simulation , Composite materials , Computer simulation , Computerized tomography , Optimization , Rotation , Shapes

CAPPD: Emotional Engineering

Evaluating the Effect of Interactions Between Appearance-Related Product Designs and Facial Characteristics on Social Affectivity

Cheng-Hung Lo, Chih-Hsing Chu, Szu-Hao Huang

IDETC-CIE 2014; V01AT02A082https://doi.org/10.1115/DETC2014-34195

Abstract

View Articletitled, Evaluating the Effect of Interactions Between Appearance-Related Product Designs and Facial Characteristics on Social Affectivity

PDF

Topics: Product design , Design , Deformation

1/F Noise-Fluctuated Cozy Lighting System for Concentration Improvement

Teruaki Ito, Eiichi Honda, Tetsuo Ichikawa, Yosuke Kinouchi, Masatake Akutagawa, Takahiro Emoto, Midori Yoshida

IDETC-CIE 2014; V01AT02A083https://doi.org/10.1115/DETC2014-34335

Abstract

View Articletitled, 1/F Noise-Fluctuated Cozy Lighting System for Concentration Improvement

PDF

Topics: Noise (Sound) , Brightness (Photometry) , Engineering prototypes , Light-emitting diodes , Natural phenomena , Ocean waves , Temperature control , Ultraviolet radiation , Wind

Prototyping for the Product Experience: An Example in the Household Appliances Industry

Monica Bordegoni, Umberto Cugini, Francesco Ferrise, Serena Graziosi

IDETC-CIE 2014; V01AT02A084https://doi.org/10.1115/DETC2014-34347

Abstract

View Articletitled, Prototyping for the Product Experience: An Example in the Household Appliances Industry

PDF

Topics: Engineering prototypes , Feedback

Emotional Break-In of Products

Shuichi Fukuda

IDETC-CIE 2014; V01AT02A085https://doi.org/10.1115/DETC2014-34364

Abstract

View Articletitled, Emotional Break-In of Products

PDF

Topics: Design , Design engineering , Machinery , Maintenance , Mechanical products , Preferences

Effects of Expectation Uncertainty and Surprise on Quality Perception Factors of Expectation Effect

Hideyoshi Yanagisawa, Natsu Mikami

IDETC-CIE 2014; V01AT02A086https://doi.org/10.1115/DETC2014-34458

Abstract

View Articletitled, Effects of Expectation Uncertainty and Surprise on Quality Perception Factors of Expectation Effect

PDF

Topics: Design , Engineering disciplines , Entropy , Statistical distributions , Surface roughness , Surface texture , Texture (Materials) , Uncertainty

Neural Mechanisms of Evaluation and Memory of Product

Kazutaka Ueda

IDETC-CIE 2014; V01AT02A087https://doi.org/10.1115/DETC2014-34735

Abstract

View Articletitled, Neural Mechanisms of Evaluation and Memory of Product

PDF

Topics: Brain , Electroencephalography , Preferences , Product design , Product evaluation , Spatiotemporal phenomena

Robust Design on KANSEI of Product Satisfying Emotion and Preference of Target Customers Using Taguchi Method

Hideki Aoyama, Yuka Kawamura, Tetsuo Oya

IDETC-CIE 2014; V01AT02A088https://doi.org/10.1115/DETC2014-34813

Abstract

View Articletitled, Robust Design on KANSEI of Product Satisfying Emotion and Preference of Target Customers Using Taguchi Method

PDF

Topics: Design , Preferences , Taguchi methods , Design methodology , Manufacturing technology

Evaluation of Human Thermal Comfort Using Near-Infrared Spectroscopy

Keiichi Watanuki, Lei Hou, Yuuki Kondou

IDETC-CIE 2014; V01AT02A089https://doi.org/10.1115/DETC2014-35430

Abstract

View Articletitled, Evaluation of Human Thermal Comfort Using Near-Infrared Spectroscopy

PDF

Topics: Near-infrared spectroscopy , Temperature , Air conditioning , Energy consumption , Brain , Control systems , Economics , Evaluation methods , Natural resources , Signals

Use Scenario to Implement an Innovative Service: Teledermatology

Tu Anh Duong, Romain Farel, Julie Le Cardinal

IDETC-CIE 2014; V01AT02A090https://doi.org/10.1115/DETC2014-35516

Abstract

View Articletitled, Use Scenario to Implement an Innovative Service: Teledermatology

PDF

Topics: Biomedicine , Cancer , Density , Health care , Innovation , Modeling , Skin , Telemedicine

CAPPD: Modeling Tools and Metrics for Sustainable Manufacturing

A Robust Surrogate Modeling Approach for Material Selection in Sustainable Design of Products

Douglas Eddy, Sundar Krishnamurty, Ian Grosse, Jack Wileden, Kemper Lewis

IDETC-CIE 2014; V01AT02A091https://doi.org/10.1115/DETC2014-34280

Abstract

View Articletitled, A Robust Surrogate Modeling Approach for Material Selection in Sustainable Design of Products

PDF

Topics: Green design , Modeling , Design , Construction , Product design , Sustainability , Approximation , Automotive brakes , Life cycle assessment , Materials properties