Skip Nav Destination
Proceedings Papers
In This Volume
Volume 8: 22nd Reliability, Stress Analysis, and Failure Prevention Conference; 25th Conference on Mechanical Vibration and Noise
22nd Reliability, Stress Analysis, and Failure Prevention Conference
Design Methods and Analyses
Fatigue and Failure Analyses
Investigations on Concepts for Modularizing a Horizontal Axis Wind Turbine Blade
IDETC-CIE 2013; V008T12A003https://doi.org/10.1115/DETC2013-12069
Topics:
Blades
,
Horizontal axis wind turbines
,
Joining
,
Stress
,
Tradeoffs
,
Wind turbines
A Method for Multiaxial Fatigue Reliability Analysis Based on Mixed Weibull Distribution
IDETC-CIE 2013; V008T12A004https://doi.org/10.1115/DETC2013-12970
Topics:
Event history analysis
,
Fatigue
,
Weibull distribution
,
Fatigue life
,
Stress
,
Chaos
,
Disks
,
Failure
,
Finite element analysis
,
Probability
Reliability Analyses
Reliability Analysis of Automotive Semi-Axle on Basic of Imprecise Probability
IDETC-CIE 2013; V008T12A005https://doi.org/10.1115/DETC2013-12933
Topics:
Event history analysis
,
Probability
,
Reliability
,
Reliability theory
,
Uncertainty
,
Computation
,
Sands
A Reliability Allocation Method Considering Failure Dependence
IDETC-CIE 2013; V008T12A006https://doi.org/10.1115/DETC2013-12944
Topics:
Failure
,
Reliability
Online-Applicable Temperature Prediction Model for EV Battery Pack Thermal Management
IDETC-CIE 2013; V008T12A008https://doi.org/10.1115/DETC2013-13549
Topics:
Batteries
,
Temperature
,
Thermal management
,
Sensors
,
Artificial neural networks
,
Temperature controls
,
Electric vehicles
,
Failure
,
Lithium
,
Maintenance
25th Conference on Mechanical Vibration and Noise
Damage Detection and Diagnostics
Torsional Vibration Detection Using High Sampling Rate and High Resolution Keyphasor Information
IDETC-CIE 2013; V008T13A001https://doi.org/10.1115/DETC2013-12367
Topics:
Resolution (Optics)
,
Vibration
,
Machinery
,
Engines
,
Motors
,
Wheels
,
Condition monitoring
,
Contamination
,
Energy / power systems
,
Errors
Application of Cyclostationary Indicators for the Diagnostics of Distributed Faults in Ball Bearings
IDETC-CIE 2013; V008T13A002https://doi.org/10.1115/DETC2013-12804
Topics:
Ball bearings
,
Bearings
,
Signals
,
Wear
,
Fault diagnosis
,
Impulse (Physics)
,
Manufacturing
,
Stress
Condition Monitoring of Marine Couplings by Means of Vibration Analysis Techniques
IDETC-CIE 2013; V008T13A003https://doi.org/10.1115/DETC2013-12806
Topics:
Condition monitoring
,
Couplings
,
Vibration analysis
,
Discrete wavelet transforms
,
Impulse (Physics)
,
Propellers
,
Signals
,
Wavelets
,
Boats
,
Diesel engines
Incoming Stall Identification in Axial Compressors by Vibration Analysis
IDETC-CIE 2013; V008T13A004https://doi.org/10.1115/DETC2013-12810
Topics:
Compressors
,
Vibration analysis
,
Signals
,
Accelerometers
,
Acoustics
,
Microphones
,
Rotors
,
Stall behavior
,
Vibration
Diagnostics of Rolling Element Bearings for the Traction System of High Speed Trains: Experimental Evidences
IDETC-CIE 2013; V008T13A005https://doi.org/10.1115/DETC2013-13095
Topics:
Rolling bearings
,
Traction
,
Trains
,
Bearings
,
Failure
,
Signal processing
,
Dynamics (Mechanics)
,
Maintenance
,
Rails
,
Sensors
Dynamics of Biomechanical Systems and Other Emerging Applications
Dynamics of Globally-, Dissipatively-Coupled Resonators
IDETC-CIE 2013; V008T13A007https://doi.org/10.1115/DETC2013-12949
Topics:
Dynamics (Mechanics)
,
Resonance
,
Micromechanical resonators
,
Sensors
,
Signal processing
Experiments in Dynamic Systems
Experimental Vibro-Acoustic Transfer Path Analysis on Helicopters
IDETC-CIE 2013; V008T13A008https://doi.org/10.1115/DETC2013-12437
Topics:
Acoustics
,
Helicopters
,
Databases
,
Flight
,
Modal analysis
,
Reliability
A Methodology for the Appropriation and the Isolation of Nodal Diameter Modes in Cyclic Symmetric Structures
IDETC-CIE 2013; V008T13A012https://doi.org/10.1115/DETC2013-12919
Topics:
Calibration
,
Compressors
,
Engines
,
Excitation
,
Stators
Nonlinear Vibration Behavior of Sandwich Beams With Entangled Fiber Core Material
IDETC-CIE 2013; V008T13A013https://doi.org/10.1115/DETC2013-13010
Topics:
Fibers
,
Nonlinear vibration
,
Shear (Mechanics)
,
Shear modulus
,
Damping
,
Die cutting
,
Equations of motion
,
Frequency response
,
Materials properties
,
Resonance
Jointed Structures, Contact, and Friction
Dynamics of Assembled Structures: Taking Into Account the Surface Defects in Interfaces
IDETC-CIE 2013; V008T13A014https://doi.org/10.1115/DETC2013-12092
Topics:
Computation
,
Cycles
,
Damping
,
Dynamics (Mechanics)
,
Energy dissipation
,
Friction
,
Modeling
,
Rheology
,
Structural dynamics
,
Vibration
The Difficulty of Modelling Damping in Linear Dynamic Systems
IDETC-CIE 2013; V008T13A016https://doi.org/10.1115/DETC2013-12823
Topics:
Damped linear dynamic systems
,
Modeling
,
Damping
,
Poles (Building)
,
Dampers
,
Inertia (Mechanics)
,
Passive damping
,
Springs
,
Stiffness
,
Viscoelastic materials
Wave Based Analysis of Buckling in Columns and Frames
IDETC-CIE 2013; V008T13A018https://doi.org/10.1115/DETC2013-12926
Topics:
Buckling
,
Waves
,
Bracing (Construction)
,
Eigenvalues
,
Equations of motion
,
Gates (Closures)
,
Geometry
,
Mesh generation
,
Modeling
,
Reflection
Epistemic and Aleatoric Uncertainty in Modeling
IDETC-CIE 2013; V008T13A019https://doi.org/10.1115/DETC2013-13234
Topics:
Modeling
,
Uncertainty
,
Accounting
,
Errors
Strategies for Analyzing Random Vibration of Jointed Structures
IDETC-CIE 2013; V008T13A021https://doi.org/10.1115/DETC2013-13293
Topics:
Random vibration
,
Stress
,
Approximation
,
Constitutive equations
,
Dynamic analysis
Nonlinear Systems and Phenomena
Two Paths to Isochronicity in a Class of One Degree of Freedom Oscillators
IDETC-CIE 2013; V008T13A022https://doi.org/10.1115/DETC2013-12070
Topics:
Degrees of freedom
,
Design
,
Error functions
,
Harmonic oscillators
,
Oscillations
,
Vibration
Nonlinear Vibration Analysis and Approximate Solution of Micro-Beams
IDETC-CIE 2013; V008T13A025https://doi.org/10.1115/DETC2013-12187
Reducing Vertical and Angular Accelerations With Nonlinear Asymmetrical Shock Absorber in Passenger Vehicles
IDETC-CIE 2013; V008T13A026https://doi.org/10.1115/DETC2013-12241
Topics:
Shock absorbers
,
Vehicles
,
Absorption
,
Dampers
,
Oscillations
,
Roads
,
Symmetry (Physics)
,
Vibration
Synthesis of Stable Optimal Controls From Lyapunov Based Constraints
IDETC-CIE 2013; V008T13A027https://doi.org/10.1115/DETC2013-12395
Design for 1:2 Internal Resonances in In-Plane Vibrations of Plates With Hyperelastic Materials
IDETC-CIE 2013; V008T13A028https://doi.org/10.1115/DETC2013-12454
Topics:
Design
,
Plates (structures)
,
Resonance
,
Vibration
,
Finite element methods
,
Robots
,
Aircraft
,
Construction
,
Dynamic response
,
Excitation
On Chaotic Dynamics of a Double Pendulum Arm Excited by a Nonlinear Shaker Based RLC Circuit
IDETC-CIE 2013; V008T13A029https://doi.org/10.1115/DETC2013-12545
Topics:
Circuits
,
Dynamics (Mechanics)
,
Pendulums
,
Bifurcation
,
Capacitors
,
Chaos
,
Electric charge
,
Magnetic fields
,
Poincaré maps
,
Robots
Comparing LQG/LTR and the SDRE Techniques for Hybrid Fully-Connected PLL Network Control
Átila Madureira Bueno, Angelo Marcelo Tusset, Diego Paolo Ferruzzo Correa, José Roberto Castilho Piqueira, José Manoel Balthazar
IDETC-CIE 2013; V008T13A030https://doi.org/10.1115/DETC2013-12649
Topics:
Clocks
,
Control algorithms
,
Control systems
,
Design
,
Integrated circuits
,
Signals
,
Stability
,
Synchronization
,
Telecommunications
,
Transients (Dynamics)
SDRE Control Applied to an Electromechanical Pendulum Excited by a Non-Ideal Motor
Atila Madureira Bueno, Angelo Marcelo Tusset, João Paulo Martins dos Santos, Masayoshi Tsuchida, José Manuel Balthazar
IDETC-CIE 2013; V008T13A031https://doi.org/10.1115/DETC2013-12676
Topics:
Engines
,
Motors
,
Pendulums
,
Computer simulation
,
Feedback
,
Feedforward control
,
Frequency response
,
Oscillations
,
Perturbation theory
,
Poles (Building)
Shock Isolation in Finite-Length Dimer Chains With Linear, Cubic and Hertzian Spring Interactions
IDETC-CIE 2013; V008T13A033https://doi.org/10.1115/DETC2013-13229
Topics:
Chain
,
Shock isolation
,
Springs
,
Computer simulation
,
Displacement
,
Shock (Mechanics)
,
Tradeoffs
Smooth Projective Nonlinear Noise Reduction
IDETC-CIE 2013; V008T13A034https://doi.org/10.1115/DETC2013-13344
Nonlinear Response of CNT Cantilever Based Nano-Resonators
IDETC-CIE 2013; V008T13A035https://doi.org/10.1115/DETC2013-13511
Topics:
Cantilevers
,
Carbon nanotubes
,
Nanomechanical resonators
,
Bifurcation
,
Resonance
,
Dynamic response
,
Deflection
,
Excitation
,
Stability
,
Van der Waals forces
A Numerical Averaging Algorithm for Rapid Simulation of Multiscale Damage Dynamics
IDETC-CIE 2013; V008T13A036https://doi.org/10.1115/DETC2013-13545
Topics:
Algorithms
,
Damage
,
Dynamics (Mechanics)
,
Simulation
,
Brittleness
,
Cycles
,
Failure
,
Failure mechanisms
,
Finite element analysis
,
Geometry
Rotating Systems and Rotor Dynamics
Dynamic Model of Spherical Roller Bearing
IDETC-CIE 2013; V008T13A037https://doi.org/10.1115/DETC2013-12102
Topics:
Clearances (Engineering)
,
Dynamic models
,
Roller bearings
Experimental Study of Torsional-Bending Coupled Vibration of a Rotor System With a Bladed Disk
IDETC-CIE 2013; V008T13A039https://doi.org/10.1115/DETC2013-12115
Topics:
Disks
,
Rotors
,
Vibration
,
Resonance
,
Excitation
,
Torsion
,
Blades
,
Servomotors
,
Steam turbines
,
Bearings
Rotor-Stator Interaction Scenarios for the Centrifugal Compressor of a Helicopter Engine
IDETC-CIE 2013; V008T13A040https://doi.org/10.1115/DETC2013-12211
Topics:
Compressors
,
Engines
,
Rotors
,
Stators
,
Blades
,
Vibration
,
Aircraft engines
,
Computer simulation
,
Failure
,
Fourier transforms
A Qualitative Numerical Analysis of Rotor-Casing Interactions in Centrifugal Compressors of Helicopter Engines
IDETC-CIE 2013; V008T13A041https://doi.org/10.1115/DETC2013-12212
Topics:
Compressors
,
Engines
,
Numerical analysis
,
Rotors
,
Friction
,
Shapes
,
Dynamics (Mechanics)
,
Engineering simulation
,
Fourier transforms
,
Simulation
Optimal Stiffness Parameters of the Turbine Bladed Disk Computational Model
IDETC-CIE 2013; V008T13A042https://doi.org/10.1115/DETC2013-12249
Topics:
Disks
,
Stiffness
,
Turbines
,
Blades
,
Centrifugal force
,
Design
,
Mode shapes
,
Rotation
,
Steam turbines
,
Vibration
Analysis of Rotor Load Harmonic Composition and Load Transference Between Frames
IDETC-CIE 2013; V008T13A043https://doi.org/10.1115/DETC2013-12323
Topics:
Rotors
,
Stress
,
Aerodynamics
,
Aircraft
,
Army
,
Blades
,
Fatigue life
,
Flight
,
Fluid-dynamic forces
,
Helicopters
Analysis of the Evolution of the Pressure Forces in Variable Displacement Vane Pumps Using Different Approaches
IDETC-CIE 2013; V008T13A044https://doi.org/10.1115/DETC2013-12440
Topics:
Displacement
,
Pressure
,
Pumps
,
Acoustics
,
High pressure (Physics)
,
Lumped parameter models
,
Optimization
,
Rotors
,
Simulation
,
Structural design
Dynamic Response of an Unbalanced Rotor Supported on Bearing With Outer Race Waviness
IDETC-CIE 2013; V008T13A046https://doi.org/10.1115/DETC2013-12738
Topics:
Bearings
,
Dynamic response
,
Rotors
,
Waves
,
Ball bearings
,
Chaos
,
Clearances (Engineering)
,
Dampers
,
Damping
,
Excitation
Localization Phenomena of Nonlinear Vibrations in Three-Blade Wind Turbines
IDETC-CIE 2013; V008T13A047https://doi.org/10.1115/DETC2013-12773
Topics:
Blades
,
Vibration
,
Wind turbines
,
Degrees of freedom
,
Wind pressure
,
Computer simulation
,
Excitation
,
Frequency response
,
Springs
Vibration of Bending-Torsion Coupled Resonance in a Rotor
IDETC-CIE 2013; V008T13A049https://doi.org/10.1115/DETC2013-12778
Topics:
Resonance
,
Rotors
,
Torsion
,
Vibration
,
Reactor protection systems
,
Stability
,
Computer simulation
,
Engineering simulation
,
Simulation
Investigation of Dry Friction Effect of Shroud Damping Wire on Model Test Bladed Wheel
IDETC-CIE 2013; V008T13A050https://doi.org/10.1115/DETC2013-12851
Topics:
Damping
,
Dry friction
,
Wheels
,
Wire
,
Blades
,
Resonance
,
Vibration
,
Couplings
,
Disks
,
Dynamic response
Unbalance Identification in Large Steam Turbo-Generator Unit Using a Model-Based Method
Paolo Pennacchi, Andrea Vania, Steven Chatterton, Ionel Nistor, Philippe Voinis, Roberto Ricci, Pietro Borghesani
IDETC-CIE 2013; V008T13A053https://doi.org/10.1115/DETC2013-13238
Topics:
Bearings
,
Condition monitoring
,
Damping
,
Downtime
,
Energy generation
,
Finite element analysis
,
Inspection
,
Machinery
,
Maintenance
,
Nuclear power stations
Dynamical Structural Modification for Rotordynamic Application
IDETC-CIE 2013; V008T13A056https://doi.org/10.1115/DETC2013-13509
Topics:
Approximation
,
Dynamic response
,
Errors
,
Machine design
,
Manufacturing
,
Modeling
,
Rotordynamics
,
Transfer functions
,
Turbogenerators
Floquet Stability Analysis of a Rotor Supported on Rolling Element Bearings With Clearance and Static Load
IDETC-CIE 2013; V008T13A057https://doi.org/10.1115/DETC2013-13695
Topics:
Clearances (Engineering)
,
Rolling bearings
,
Rotors
,
Stability
,
Stress
,
Differential equations
,
Equilibrium (Physics)
,
Excitation
,
Rotation
Rotordynamic Analysis of a Rotor-Disk System Including a Synchronously Reduced Modal Truncation Method
IDETC-CIE 2013; V008T13A058https://doi.org/10.1115/DETC2013-13699
Topics:
Disks
,
Rotors
,
Bearings
,
Mode shapes
,
Rotordynamics
,
Stability
,
Eigenvalues
,
Errors
,
Uncertainty
Nonlinear Modeling of Tilting-Pad Bearings With Application to a Flexible Rotor Analysis
IDETC-CIE 2013; V008T13A059https://doi.org/10.1115/DETC2013-13712
Topics:
Bearings
,
Modeling
,
Rotors
,
Transients (Dynamics)
,
Compressors
,
Damping
,
Finite element methods
,
Machinery
,
Manufacturing
,
Pressure
Steam Turbine Vibration Caused by Oil Coking Rubs: Case Studies and Numerical Simulation
IDETC-CIE 2013; V008T13A060https://doi.org/10.1115/DETC2013-13713
Topics:
Computer simulation
,
Steam turbines
,
Vibration
,
Rotors
,
Stators
,
Bearings
,
Clearances (Engineering)
,
Compressors
,
Fault diagnosis
,
Generators
Structures and Continuous Systems
Kinematic and Dynamic Analysis of V-Twin Powertrains: Design Trade-Offs
IDETC-CIE 2013; V008T13A061https://doi.org/10.1115/DETC2013-12052
Topics:
Design
,
Dynamic analysis
,
Kinematics
,
Tradeoffs
,
Bearings
,
Pistons
,
Dynamics (Mechanics)
,
Stress
Complex Modal Analysis of a Non-Modally Damped Continuous Beam
IDETC-CIE 2013; V008T13A062https://doi.org/10.1115/DETC2013-12078
ROM of Primary Resonance Amplitude-Voltage Response of MEMS Cantilevers
IDETC-CIE 2013; V008T13A064https://doi.org/10.1115/DETC2013-12432
Topics:
Cantilevers
,
Microelectromechanical systems
,
Resonance
,
Excitation
Strategies for Non-Linear System Identification in Base Excited Structure
IDETC-CIE 2013; V008T13A065https://doi.org/10.1115/DETC2013-12589
Topics:
Cantilever beams
,
Degrees of freedom
,
Dynamics (Mechanics)
,
Excitation
,
Nonlinear systems
,
Regression analysis
,
Stiffness
,
Testing
Identification of the Dynamic Behavior of Surrogate Explosive Materials
IDETC-CIE 2013; V008T13A066https://doi.org/10.1115/DETC2013-12755
Topics:
Explosives
,
Crystals
,
Excitation
,
Acoustics
,
Binders (Materials)
,
Compression
,
Damping
,
Dynamic response
,
Improvised explosive devices
,
Materials properties
A Limit Model for the Linear Dynamics of a Two-Layer Beam
IDETC-CIE 2013; V008T13A067https://doi.org/10.1115/DETC2013-13131
Topics:
Deformation
,
Dynamics (Mechanics)
,
Kinematics
,
Reliability
,
Rotational inertia
,
Shear (Mechanics)
,
Vibration
Vibration of Spinning Cantilever Beams Undergoing Coupled Bending and Torsional Motion
IDETC-CIE 2013; V008T13A068https://doi.org/10.1115/DETC2013-13410
Topics:
Cantilever beams
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Vibration
,
Rotation
,
Blades
,
Equations of motion
Vibration and Stability of Mechanical Systems
Integration of Drill Torsional-Axial Coupling in Spindle-Vibratory Drilling Head Model for Stability Analysis
IDETC-CIE 2013; V008T13A069https://doi.org/10.1115/DETC2013-12049
Topics:
Drilling
,
Drills (Tools)
,
Stability
,
Evacuations
,
Cutting
,
Cycles
,
Design
,
Lubrication
,
Machining
,
Rotordynamics
Dynamics of Battery Tabs Under Ultrasonic Welding
IDETC-CIE 2013; V008T13A070https://doi.org/10.1115/DETC2013-12050
Topics:
Batteries
,
Dynamics (Mechanics)
,
Ultrasonic welding
,
Welding
,
Metals
,
Vibration
,
Design
,
Failure
,
Manufacturing
,
Mechanical properties
Optimal Tuning of Centrifugal Pendulum Vibration Absorbers
IDETC-CIE 2013; V008T13A071https://doi.org/10.1115/DETC2013-12449
Topics:
Pendulums
,
Vibration absorbers
,
Rotors
,
Vibration
,
Blades
,
Equations of motion
,
Modal analysis
,
Rotor vibration
,
Wind turbines
Interesting Eigenvalue Behavior in High-Speed Planetary Gears With Gyroscopic Effects
IDETC-CIE 2013; V008T13A073https://doi.org/10.1115/DETC2013-13419
Topics:
Eigenvalues
,
Planetary gears
,
Stability
,
Rotating disks
Suppression of Aeroelastic Instabilities due to Freeplay Nonlinearity
IDETC-CIE 2013; V008T13A075https://doi.org/10.1115/DETC2013-13518
Vibration Control, Energy Harvesting, Smart Structures, and Damping
New Design of Magnetic Nonlinear Energy Sink for Shock Mitigation in Dynamic Structures
IDETC-CIE 2013; V008T13A076https://doi.org/10.1115/DETC2013-12461
Topics:
Design
,
Shock (Mechanics)
,
Stiffness
,
Magnets
,
Aircraft
,
Computer simulation
,
Earthquakes
,
Energy transformation
,
Magnetic fields
,
Permanent magnets
Optimal Control of Piezoelectric Laminated Parabolic Cylindrical Panels
IDETC-CIE 2013; V008T13A077https://doi.org/10.1115/DETC2013-12513
Topics:
Optimal control
,
Algorithms
,
Control equipment
,
Damping
,
Design
,
Feedback
,
Pipes
,
Sensors
,
Vibration control
,
Actuators
Diagonal Flexoelectric Sensors and Sensitivity Analysis on Cylindrical Shells
IDETC-CIE 2013; V008T13A078https://doi.org/10.1115/DETC2013-12534
Topics:
Pipes
,
Sensitivity analysis
,
Sensors
,
Signals
,
Dimensions
,
Excitation
,
Shells
,
Strain gradient
,
Waves
Tunable Vibration Absorption of a Cantilever Beam Utilizing Fluidic Flexible Matrix Composites
IDETC-CIE 2013; V008T13A079https://doi.org/10.1115/DETC2013-12580
Topics:
Absorption
,
Cantilever beams
,
Composite materials
,
Vibration
,
Flow (Dynamics)
,
Fluids
,
Inertia (Mechanics)
,
Vibration absorbers
,
Anisotropy
,
Bonding
Closed-Form Optimization of Resonant Shunted Electromagnetic Tuned Mass Dampers for Vibration Control and Energy Harvesting
IDETC-CIE 2013; V008T13A081https://doi.org/10.1115/DETC2013-12756
Topics:
Dampers
,
Energy harvesting
,
Optimization
,
Resonance
,
Vibration control
,
Circuits
,
Vibration
,
Capacitance
,
Damping
,
Degrees of freedom
A Smooth Wave-Form Command Shaping Control
IDETC-CIE 2013; V008T13A082https://doi.org/10.1115/DETC2013-12768
Topics:
Waves
,
Oscillations
,
Vibration
,
Displacement
,
Excitation
,
Gantry cranes
,
Harmonic oscillators
,
Smoothing methods
,
Surface roughness
Flexoelectric Energy Harvesting of Circular Rings
IDETC-CIE 2013; V008T13A083https://doi.org/10.1115/DETC2013-12769
Vibration Control of Cylindrical Shell Panel With Shape Memory Alloy Actuators
IDETC-CIE 2013; V008T13A084https://doi.org/10.1115/DETC2013-12788
Topics:
Actuators
,
Pipes
,
Shape memory alloys
,
Vibration control
,
Artificial neural networks
,
Temperature
,
Neural network models
,
Vibration
,
Wire
,
Heating
Numerical Investigation of Rotating Nonlinear Energy Sink for Shock Mitigation
IDETC-CIE 2013; V008T13A087https://doi.org/10.1115/DETC2013-13177
Topics:
Degrees of freedom
,
Energy transformation
,
Impulse (Physics)
,
Linear systems
,
Resonance
,
Shock (Mechanics)
,
Stiffness
,
Stress
Power Harvesting Prediction of Piezoelectric Stack Actuator From a Shock Event
IDETC-CIE 2013; V008T13A088https://doi.org/10.1115/DETC2013-13210
Topics:
Actuators
,
Energy harvesting
,
Shock (Mechanics)
,
Errors
,
Impulse (Physics)
,
Ceramics
,
Computation
,
Computer software
,
Degrees of freedom
,
Matlab
Experimental Blast Testing of a Large 9-Story Structure Equipped With a System of Nonlinear Energy Sinks
Nicholas E. Wierschem, Sean A. Hubbard, Jie Luo, Larry A. Fahnestock, B. F. Spencer, Jr., D. Dane Quinn, D. Michael McFarland, Alexander F. Vakakis, Lawrence A. Bergman
IDETC-CIE 2013; V008T13A090https://doi.org/10.1115/DETC2013-13327
An M-Shaped Asymmetric Nonlinear Oscillator for Broadband Energy Harvesting
IDETC-CIE 2013; V008T13A091https://doi.org/10.1115/DETC2013-13368
Topics:
Energy harvesting
,
Excitation
,
Hardening
,
Cantilevers
,
Computer simulation
,
Damping
,
Displacement
,
Frequency response
,
Geometry
,
Magnetic fields
Dynamic Analysis of Hula Hoop Motion and Optimized Energy Harvest Circuit
IDETC-CIE 2013; V008T13A093https://doi.org/10.1115/DETC2013-13520
Piezoelectric Energy Harvesting Analysis Under Non-Stationary Random Vibrations
IDETC-CIE 2013; V008T13A094https://doi.org/10.1115/DETC2013-13547
Topics:
Energy harvesting
,
Random vibration
,
Electricity (Physics)
,
Vibration
,
Energy resources
,
Signals
,
Chaos
,
Design
,
Electric potential
,
Excitation
Wave Propagation and Acoustics
Explicit Maps of Acoustic Regimes of a Wind Instrument
IDETC-CIE 2013; V008T13A097https://doi.org/10.1115/DETC2013-12644
Topics:
Acoustics
,
Instrumentation
,
Wind
,
Design
,
Oscillations
,
Support vector machines
Topology Optimization of Nonlinear Metamaterials
IDETC-CIE 2013; V008T13A098https://doi.org/10.1115/DETC2013-12960
Topics:
Metamaterials
,
Optimization
,
Topology
,
Energy gap
,
Acoustics
,
Design
,
Genetic algorithms
,
Periodic structures
,
Stress
Modal-Based Finite Elements for Efficient Wave Propagation Analysis
IDETC-CIE 2013; V008T13A100https://doi.org/10.1115/DETC2013-13580
Email alerts
Most Read Proceedings Papers in IDETC-CIE
Case Study Method for Design Research: A Justification
IDETC-CIE2008
IDETC-CIE2024 Front Matter
IDETC-CIE2024