Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B

14th Design for Manufacturing and the Life Cycle Conference

Cost Estimation and Total Cost of Ownership

A Framework for Considering Uncertainty in Quantitative Life Cycle Cost Estimation

Yee Mey Goh, Linda Newnes, Chris McMahon, Antony Mileham, Christiaan J. J. Paredis

IDETC-CIE 2009; 3-13https://doi.org/10.1115/DETC2009-86385

Abstract

View Articletitled, A Framework for Considering Uncertainty in Quantitative Life Cycle Cost Estimation

PDF

Topics: Life cycle costing , Uncertainty , Decision making , Engineering systems and industry applications , Project cost estimation , Robustness

Cost Modeling of Flexible Assembly Systems

Yingxia Yang, Randolph Kirchain, Richard Roth, Jorge Arinez, Stephan Biller, J. Patrick Spicer

IDETC-CIE 2009; 15-24https://doi.org/10.1115/DETC2009-86428

Abstract

View Articletitled, Cost Modeling of Flexible Assembly Systems

PDF

Topics: Flexible manufacturing systems , Modeling , Manufacturing , Design , Assembly lines , Computers , Electronic components , Flexible systems

An Application of a Generalized Life Cycle Cost Model to a Typical Pump From Industry

L. Y. Waghmode, A. D. Sahasrabudhe

IDETC-CIE 2009; 25-34https://doi.org/10.1115/DETC2009-86596

Abstract

View Articletitled, An Application of a Generalized Life Cycle Cost Model to a Typical Pump From Industry

PDF

Topics: Life cycle costing , Pumps , Design , Failure , Maintainability , Reliability , Maintenance , Product design

Life Cycle Cost Modeling of Hybrid Vehicles During Early Product Architecture Development

Carlos Gorbea, Ernst Fricke, Udo Lindemann

IDETC-CIE 2009; 35-47https://doi.org/10.1115/DETC2009-87565

Abstract

View Articletitled, Life Cycle Cost Modeling of Hybrid Vehicles During Early Product Architecture Development

PDF

Topics: Hybrid electric vehicles , Life cycle costing , Modeling , Optimization

Design for Mass Customization, Design for Service, Design for Layered Manufacturing, and Design for Quality

Joint Pricing and Platform Configuration in Product Family Design With Genetic Algorithm

Li Qian, David Ben-Arieh

IDETC-CIE 2009; 49-58https://doi.org/10.1115/DETC2009-86110

Abstract

View Articletitled, Joint Pricing and Platform Configuration in Product Family Design With Genetic Algorithm

PDF

Topics: Design , Genetic algorithms , Sales , Drills (Tools) , Manufacturing , Preferences , Profitability

DSM-Based Product Representation for Retirement Process-Based Modularity

Xiaoxia Lai, John K. Gershenson

IDETC-CIE 2009; 59-72https://doi.org/10.1115/DETC2009-87037

Abstract

View Articletitled, DSM-Based Product Representation for Retirement Process-Based Modularity

PDF

Topics: Cable reels , Cycles , Design , Design methodology , Manufacturing , Product design , Recycling , Tooling

Examining Potential Design Guidelines for Use in Fused Deposition Modeling to Reduce Build Time and Material Volume

Gregory A. Teitelbaum, Linda C. Schmidt, Yoann Goaer

IDETC-CIE 2009; 73-82https://doi.org/10.1115/DETC2009-87491

Abstract

View Articletitled, Examining Potential Design Guidelines for Use in Fused Deposition Modeling to Reduce Build Time and Material Volume

PDF

Topics: Design , Modeling , Catalysts , Computer software , Dimensions , Simulation

Representing User Activity and Product Function for Universal Design

Vincent Kostovich, Daniel A. McAdams, Seung Ki Moon

IDETC-CIE 2009; 83-100https://doi.org/10.1115/DETC2009-87507

Abstract

View Articletitled, Representing User Activity and Product Function for Universal Design

PDF

Topics: Design

Design for Supply Chain

Maintainability Evaluation Based on the Product Disassembly Analysis

Nan Wu, Qingjin Peng

IDETC-CIE 2009; 101-109https://doi.org/10.1115/DETC2009-86394

Abstract

View Articletitled, Maintainability Evaluation Based on the Product Disassembly Analysis

PDF

Topics: Maintainability

Virtual Supply Chain Configuration for Product Families: Conceptualization and Formalism

Qianli Xu, Jianxin Roger Jiao, Petri Helo

IDETC-CIE 2009; 111-122https://doi.org/10.1115/DETC2009-86672

Abstract

View Articletitled, Virtual Supply Chain Configuration for Product Families: Conceptualization and Formalism

PDF

Topics: Supply chains , Modeling , Electric motors , Manufacturing , Semantics , Supply chain management

Adoption of NPD Process Improvement Concepts in Industry: Status Review of Automotive Suppliers in Turkey—2008

Yes¸im Yayla, Aytac¸ Yildiz, Gu¨l E. Okudan

IDETC-CIE 2009; 123-134https://doi.org/10.1115/DETC2009-87681

Abstract

View Articletitled, Adoption of NPD Process Improvement Concepts in Industry: Status Review of Automotive Suppliers in Turkey—2008

PDF

Topics: Design , Product development

Integrated Product and Process Development

Tools for Project-Based Active Learning of Amorphous Systems Design: Scenario Prototyping and Cross Team Peer Evaluation

Kosuke Ishii, Sun K. Kim, Whitfield Fowler, Takashi Maeno

IDETC-CIE 2009; 135-145https://doi.org/10.1115/DETC2009-86492

Abstract

View Articletitled, Tools for Project-Based Active Learning of Amorphous Systems Design: Scenario Prototyping and Cross Team Peer Evaluation

PDF

Topics: Design , Teams

A Top-Down Concept Selection Integrating Analytical and Optimization Approaches

Shun Takai, Vivek K. Jikar, Kenneth M. Ragsdell

IDETC-CIE 2009; 147-155https://doi.org/10.1115/DETC2009-86738

Abstract

View Articletitled, A Top-Down Concept Selection Integrating Analytical and Optimization Approaches

PDF

Topics: Design , Optimization , Optimization algorithms

A Decision-Analytic Concept Selection for a Commercial System Using Objective Data to Model Uncertainty

Shun Takai, Swithin S. Razu, Karan Banga

IDETC-CIE 2009; 157-166https://doi.org/10.1115/DETC2009-86771

Abstract

View Articletitled, A Decision-Analytic Concept Selection for a Commercial System Using Objective Data to Model Uncertainty

PDF

Topics: Decision analysis , Uncertainty , Decision making , Modeling , Automobiles , Preferences

Product Function: Component Modeling Using Rough Sets

Toshiharu Miwa, Hideki Aoyama

IDETC-CIE 2009; 167-175https://doi.org/10.1115/DETC2009-87005

Abstract

View Articletitled, Product Function: Component Modeling Using Rough Sets

PDF

Topics: Modeling , Surface roughness , Product development , Cutting , Manufacturing , Approximation , Cycles , Delays

Manufacturability Analysis During Conceptual Design

Sorting Results of Automated Concept Generators Based on Design for Manufacture and Assembly

Kerry R. Poppa, Robert B. Stone

IDETC-CIE 2009; 177-185https://doi.org/10.1115/DETC2009-87422

Abstract

View Articletitled, Sorting Results of Automated Concept Generators Based on Design for Manufacture and Assembly

PDF

Topics: Design for Manufacturing , Generators , Manufacturing , Design , Teams

The Part Count Tool (PACT) for Concept Selection

Tarang Parashar, Katie Grantham Lough, Robert B. Stone

IDETC-CIE 2009; 187-195https://doi.org/10.1115/DETC2009-87547

Abstract

View Articletitled, The Part Count Tool (PACT) for Concept Selection

PDF

Topics: Algorithms , Conceptual design , Design , Manufacturing

Robust Design and Variation Management

Variation Feedback and 3D Visualization of Geometrical Inspection Data

Fredrik Wandeba¨ck, Rikard So¨derberg, Johan S. Carlson, Per-Johan Wahlborg, Lars Lindkvist, Fredrik Ekstedt

IDETC-CIE 2009; 197-208https://doi.org/10.1115/DETC2009-86759

Abstract

View Articletitled, Variation Feedback and 3D Visualization of Geometrical Inspection Data

PDF

Topics: Feedback , Geometry , Inspection , Simulation , Visualization

Process Optimization of Sheet Metal Forming Using Operating Window

Kyungmo Kim, Jeong Je Yin, Yong S. Suh

IDETC-CIE 2009; 209-216https://doi.org/10.1115/DETC2009-86859

Abstract

View Articletitled, Process Optimization of Sheet Metal Forming Using Operating Window

PDF

Topics: Optimization , Sheet metal work , Design methodology , Automobiles , Computer simulation , Design , Failure mechanisms , Lubricants , Materials properties

Appearance FMEA: A Method for Appearance Quality Evaluation of Early Design Concepts

Karin Forslund, Timo Kero, Rikard So¨derberg

IDETC-CIE 2009; 217-225https://doi.org/10.1115/DETC2009-87161

Abstract

View Articletitled, Appearance FMEA: A Method for Appearance Quality Evaluation of Early Design Concepts

PDF

Topics: Design , Failure mode and effects analysis , Industrial design

Application of Failure Modes and Effects Analysis to Support Product In-Use Information Feedback

Grant McSorley, Greg Huet, Stephen J. Culley, Clement Fortin

IDETC-CIE 2009; 227-234https://doi.org/10.1115/DETC2009-87724

Abstract

View Articletitled, Application of Failure Modes and Effects Analysis to Support Product In-Use Information Feedback

PDF

Topics: Failure mechanisms , Feedback , Design , Failure mode and effects analysis , Life cycle costing , Testing

Sustainable Design

Proposal of an Ecodesign Assessment Methodology by Using a Weighted Checklist

Yusuke Kishita, Bi Hong Low, Shinichi Fukushige, Yasushi Umeda, Atsushi Suzuki, Takao Kawabe

IDETC-CIE 2009; 235-243https://doi.org/10.1115/DETC2009-86202

Abstract

View Articletitled, Proposal of an Ecodesign Assessment Methodology by Using a Weighted Checklist

PDF

Topics: Green design , Design , Carbon dioxide , Cycles , Emissions , Product design , Simulation , Sustainability

Developing a Robust System of Environmental Tools (RSET) to Improve Ecodesign Practice in the Automotive Sector

Hery Andriankaja, Gwenola Bertoluci, Claudiu` Vasilescu, Dominique Millet

IDETC-CIE 2009; 245-256https://doi.org/10.1115/DETC2009-86591

Abstract

View Articletitled, Developing a Robust System of Environmental Tools (RSET) to Improve Ecodesign Practice in the Automotive Sector

PDF

Topics: Computer software , Design , Green design , Sustainability , Teams

A Strategic Idea Generation Method for Eco-Business Planning

Shinsuke Kondoh, Nozomu Mishima

IDETC-CIE 2009; 257-265https://doi.org/10.1115/DETC2009-86961

Abstract

View Articletitled, A Strategic Idea Generation Method for Eco-Business Planning

PDF

Topics: Cycles , Decision making , Design , Laptop computers , Stress

A Measure of Product Sustainability Based on Triple Bottom Line

Prabir Sarkar, Sudarsan Rachuri, Hyo Won Suh, Kevin Lyons, Ram D. Sriram

IDETC-CIE 2009; 267-274https://doi.org/10.1115/DETC2009-87047

Abstract

View Articletitled, A Measure of Product Sustainability Based on Triple Bottom Line

PDF

Topics: Design , Sustainability

Reducing Product Energy Consumption With Leasing

Koji Intlekofer, Bert Bras, Mark Ferguson

IDETC-CIE 2009; 275-289https://doi.org/10.1115/DETC2009-87328

Abstract

View Articletitled, Reducing Product Energy Consumption With Leasing

PDF

Topics: Energy consumption , Arches , Cycles , Manufacturing , Energy efficiency , Flow (Dynamics) , Governments , Maintenance , Optimization , Vehicles

A Method for Developing Design for Environment Guidelines for Future Product Design

Cassandra Telenko, Carolyn C. Seepersad, Michael E. Webber

IDETC-CIE 2009; 291-302https://doi.org/10.1115/DETC2009-87389

Abstract

View Articletitled, A Method for Developing Design for Environment Guidelines for Future Product Design

PDF

Topics: Design , Product design , Reverse engineering , Life cycle assessment , Energy consumption , Green design

Scenario Based Modularization and Evaluation for Product Lifecycle Design

Shinichi Fukushige, Keita Tonoike, Yoichiro Inoue, Yasushi Umeda

IDETC-CIE 2009; 303-311https://doi.org/10.1115/DETC2009-87394

Abstract

View Articletitled, Scenario Based Modularization and Evaluation for Product Lifecycle Design

PDF

Topics: Design

Selective Disassembly and Simultaneous End-of-Life Decision Making for Multiple Products

Sara Behdad, Minjung Kwak, Harrison Kim, Deborah Thurston

IDETC-CIE 2009; 313-321https://doi.org/10.1115/DETC2009-87405

Abstract

View Articletitled, Selective Disassembly and Simultaneous End-of-Life Decision Making for Multiple Products

PDF

Topics: Decision making , Feedstock , Integer programming , Profitability

Varying Lifecycle Lengths Within a Portfolio for Product Take-Back

Yuan Zhao, Vijitashwa Pandey, Harrison Kim, Deborah Thurston

IDETC-CIE 2009; 323-335https://doi.org/10.1115/DETC2009-87625

Abstract

View Articletitled, Varying Lifecycle Lengths Within a Portfolio for Product Take-Back

PDF

Topics: Computers , Cycles , Design , Genetic algorithms , Product planning , Reliability

Challenges in Incorporating Sustainability Into Product Development: An Exploratory Study

S. A. Athalye, S. K. Govindarajan, C. A. Lopez, Marcos Esterman, Jr., Sandra Rothenberg

IDETC-CIE 2009; 337-348https://doi.org/10.1115/DETC2009-87637

Abstract

View Articletitled, Challenges in Incorporating Sustainability Into Product Development: An Exploratory Study

PDF

Topics: Product development , Sustainability , Chain

Theoretical Foundations for Design and Manufacturing Integration

Automated Manufacturability Analysis of the Draw Bending of Complex Aluminum Profiles

Joel Johansson

IDETC-CIE 2009; 349-357https://doi.org/10.1115/DETC2009-86034

Abstract

View Articletitled, Automated Manufacturability Analysis of the Draw Bending of Complex Aluminum Profiles

PDF

Topics: Aluminum , Design automation , Engineers , Finite element analysis , Arches , Computer software , Computer-aided design , Design , Engineering design processes , Engines

Validation and Identification of Optimal Fixturing Scheme Using VR

Santosh Kumar Thukaram, Qingjin Peng, Subramaniam Balikrishnan

IDETC-CIE 2009; 359-367https://doi.org/10.1115/DETC2009-86395

Abstract

View Articletitled, Validation and Identification of Optimal Fixturing Scheme Using VR

PDF

Topics: Fixturing , Design , Computer-aided engineering , Manufacturing , Manufacturing systems , Mass production , Virtual assembly , Virtual reality

Designing a Modular Rapid Manufacturing Process

Jacquelyn K. Stroble, Frank W. Liou

IDETC-CIE 2009; 369-378https://doi.org/10.1115/DETC2009-86707

Abstract

View Articletitled, Designing a Modular Rapid Manufacturing Process

PDF

Topics: Design , Manufacturing , Manufacturing systems , Integrated systems , Computer software , Control systems , Design methodology , Finishing , Lasers , Production planning

Heuristic Machining Process Planning of a Toleranced Handle Based on Graph Inference

Kuo-Ming Cheng, Jhy-Cherng Tsai

IDETC-CIE 2009; 379-384https://doi.org/10.1115/DETC2009-87770

Abstract

View Articletitled, Heuristic Machining Process Planning of a Toleranced Handle Based on Graph Inference

PDF

Topics: Machining , Production planning , Finishing , Design

6th Symposium on International Design and Design Education

Best Practices With Emphasis on Assessment

Utilizing an A3 Report Format for a Technical Review at the End of a Cornerstone Design Course

Kate Leipold, Timothy Landschoot

IDETC-CIE 2009; 387-397https://doi.org/10.1115/DETC2009-86309

Abstract

View Articletitled, Utilizing an A3 Report Format for a Technical Review at the End of a Cornerstone Design Course

PDF

Topics: Design education , Design , Engineering design , Students , Teams

Implementation and Effect of Rubrics in Capstone Design Courses

George Platanitis, Remon Pop-Iliev, Scott Nokleby

IDETC-CIE 2009; 399-407https://doi.org/10.1115/DETC2009-86996

Abstract

View Articletitled, Implementation and Effect of Rubrics in Capstone Design Courses

PDF

Topics: Design education , Design , Students , Dimensions , Undergraduate students

A Framework for Engineering Dissection Exercise Creation and Implementation

Kathleen M. Hart, Steven B. Shooter, Charles J. Kim

IDETC-CIE 2009; 409-421https://doi.org/10.1115/DETC2009-87032

Abstract

View Articletitled, A Framework for Engineering Dissection Exercise Creation and Implementation

PDF

Topics: Engineering education , Engineering prototypes , Performance , Reverse engineering , Students

Methodology for Selection, Sequencing, and Deployment of Activities in a Capstone Design Course Using the TIDEE Web-Based Assessment System

Jay McCormack, Steve Beyerlein, David F. Feldon, Denny Davis, Howard Davis, Zachary Wemlinger, Robert Gerlick, Susannah Howe

IDETC-CIE 2009; 423-432https://doi.org/10.1115/DETC2009-87478

Abstract

View Articletitled, Methodology for Selection, Sequencing, and Deployment of Activities in a Capstone Design Course Using the TIDEE Web-Based Assessment System

PDF

Topics: Design education , Design , Students , Career development , Cycles , Feedback , Process design , Teams

Creativity in Engineering Design

Graphical Interpretation of the Teamology Transformation

Douglass J. Wilde

IDETC-CIE 2009; 433-438https://doi.org/10.1115/DETC2009-86036

Abstract

View Articletitled, Graphical Interpretation of the Teamology Transformation

PDF

Topics: Decision making , Design , Students , Teams

Multidisciplinary Master Design Projects Based on Workshops for Professionals

Wim Zeiler, Perica Savanovic, Rinus van Houten

IDETC-CIE 2009; 439-450https://doi.org/10.1115/DETC2009-86295

Abstract

View Articletitled, Multidisciplinary Master Design Projects Based on Workshops for Professionals

PDF

Topics: Design , Structural design , Workshops (Work spaces)

History and Creativity in Mechanical Engineering Education

Francesco Rosa, Edoardo Rovida

IDETC-CIE 2009; 451-457https://doi.org/10.1115/DETC2009-86989

Abstract

View Articletitled, History and Creativity in Mechanical Engineering Education

PDF

Topics: Creativity , Mechanical engineering education , Engineers , Databases , History of mechanical engineering , Mechanical engineering , Design methodology , Inventions

Towards Individual Innovation Capability: The Assessment of Idea Generating Methods and Creativity in a Capstone Design Course

Anders Berglund, Sofia Ritze´n

IDETC-CIE 2009; 459-466https://doi.org/10.1115/DETC2009-87628

Abstract

View Articletitled, Towards Individual Innovation Capability: The Assessment of Idea Generating Methods and Creativity in a Capstone Design Course

PDF

Topics: Creativity , Design education , Innovation , Students , Product development , Engineering education , Teaching

Design Education in Distance Learning Settings

Assessing How Digital Design Tools Affect Learning of Engineering Design Concepts

Jacquelyn K. Stroble, Robert B. Stone, Steve E. Watkins

IDETC-CIE 2009; 467-476https://doi.org/10.1115/DETC2009-86708

Abstract

View Articletitled, Assessing How Digital Design Tools Affect Learning of Engineering Design Concepts

PDF

Topics: Design , Engineering design , Engineers , Design engineering , Engineering education , Engineering fundamentals , Students , Undergraduate students

An Information Technology Infrastructure for Internet-Enabled Remote and Portable Laboratories

J. Lane Thames, Andrew Hyder, Robert Wellman, Dirk Schaefer

IDETC-CIE 2009; 477-490https://doi.org/10.1115/DETC2009-87112

Abstract

View Articletitled, An Information Technology Infrastructure for Internet-Enabled Remote and Portable Laboratories

PDF

Topics: Change management , Design , Education , Internet , Screw threads , Security , Thread

Enhancing Mechanical Engineering Distance Education Through IT-Enabled Remote Laboratories

Andrew C. Hyder, J. Lane Thames, Dirk Schaefer

IDETC-CIE 2009; 491-500https://doi.org/10.1115/DETC2009-87456

Abstract

View Articletitled, Enhancing Mechanical Engineering Distance Education Through IT-Enabled Remote Laboratories

PDF

Topics: Education , Mechanical engineering , Students , Navigation , Open channels (Hydraulics) , Robotics , Security

A Perspective for Evaluating Wikis as a Medium for Communication Within Engineering Design Teams

Carolynn J. Walthall, Srikanth Devanathan, Lorraine Kisselburgh, Karthik Ramani, E. Daniel Hirleman, Maria C. Yang

IDETC-CIE 2009; 501-511https://doi.org/10.1115/DETC2009-87652

Abstract

View Articletitled, A Perspective for Evaluating Wikis as a Medium for Communication Within Engineering Design Teams

PDF

Topics: Engineering design , Teams , Design , Students , Collaboration , Dimensions , Feedback , Product development

Design Methodology Case Studies

Why Systematic Design Engineering?

W. Ernst Eder

IDETC-CIE 2009; 513-522https://doi.org/10.1115/DETC2009-86067

Abstract

View Articletitled, Why Systematic Design Engineering?

PDF

Topics: Design engineering , Design , Engineering design , Competencies , Creativity , Economics , Modeling

Case Study in Systematic Design Engineering: Smoke Gas Dust Precipitation

W. Ernst Eder

IDETC-CIE 2009; 523-530https://doi.org/10.1115/DETC2009-86069

Abstract

View Articletitled, Case Study in Systematic Design Engineering: Smoke Gas Dust Precipitation

PDF

Topics: Design engineering , Dust , Precipitation , Smoke , Design , Students , Creativity , Dust removal , Manufacturing engineering

A Low-Cost Tool for Gathering and Interpreting the Mobility Needs of Wheelchair Users in India

Jon Pearlman, Rory Cooper, H. S. Chhabra, Alexandra Jefferds, Ilanagai Anbarasan

IDETC-CIE 2009; 531-540https://doi.org/10.1115/DETC2009-86734

Abstract

View Articletitled, A Low-Cost Tool for Gathering and Interpreting the Mobility Needs of Wheelchair Users in India

PDF

Topics: Mechanical admittance , Wheelchairs , Design , Databases , Internet , Product development , Wounds

Systematic Design Method for Large-Scale Manufacturing of Fabricated Polymers

Brian K. Simpson, Jr., Dirk Schaefer

IDETC-CIE 2009; 541-552https://doi.org/10.1115/DETC2009-86745

Abstract

View Articletitled, Systematic Design Method for Large-Scale Manufacturing of Fabricated Polymers

PDF

Topics: Design methodology , Manufacturing , Polymers , Design , Engineering design processes , Particulate matter , Reverse engineering , Simulation , Wood products

Interdisciplinary Design

Interdisciplinary Graduate Design Programs: Results and Recommendations From a NSF Workshop

Timothy W. Simpson, Samuel T. Hunter, Cari Bryant-Arnold, Matthew Parkinson, Russell R. Barton, David Celento, John Messner

IDETC-CIE 2009; 553-563https://doi.org/10.1115/DETC2009-86699

Abstract

View Articletitled, Interdisciplinary Graduate Design Programs: Results and Recommendations From a NSF Workshop

PDF

Topics: Design , Workshops (Work spaces) , Teaching , Creativity , Engineering disciplines , Graduate students , Students , Sustainability

Academic Engineering Design Education in a Realistic Environment

Albert Albers, Christian Sauter, Thomas Maier, Martin Geier, Jens Ottnad

IDETC-CIE 2009; 565-573https://doi.org/10.1115/DETC2009-87425

Abstract

View Articletitled, Academic Engineering Design Education in a Realistic Environment

PDF

Topics: Education , Engineering design , Product development , Design , Computer-aided design , Design engineering , Engineers , Machine design , Pulse width modulation , Students

Assessing the Viability of an Interdisciplinary Design Engineering Program via a Branding Method

Cassandra C. Elrod, Katie Grantham Lough, Kevin Adams

IDETC-CIE 2009; 575-583https://doi.org/10.1115/DETC2009-87527

Abstract

View Articletitled, Assessing the Viability of an Interdisciplinary Design Engineering Program via a Branding Method

PDF

Topics: Design engineering , Engineering disciplines , Engineering students , Linear systems , Product design , Students

Interactive Design Navigational Tools

Sharad Oberoi, Susan Finger

IDETC-CIE 2009; 585-591https://doi.org/10.1115/DETC2009-87706

Abstract

View Articletitled, Interactive Design Navigational Tools

PDF

Topics: Design , Knowledge management , Students , Teams

International Practices

The Product Innovation Engineering Program: Promoting Creativity, Synthesis and International Collaboration

Martin Grimheden

IDETC-CIE 2009; 593-598https://doi.org/10.1115/DETC2009-86396

Abstract

View Articletitled, The Product Innovation Engineering Program: Promoting Creativity, Synthesis and International Collaboration

PDF

Topics: Collaboration , Creativity , Innovation , Engineering education , Education , Industrial research , Students

Gaming and Interactive Visualization for Education: A Multi-Disciplinary and Multi-University Collaborative Project

Yunjun Xu, Charles Miekas, Zahed Siddique, Chen Ling, Sagar Chowdhury, Xiaojun Geng

IDETC-CIE 2009; 599-609https://doi.org/10.1115/DETC2009-87284

Abstract

View Articletitled, Gaming and Interactive Visualization for Education: A Multi-Disciplinary and Multi-University Collaborative Project

PDF

Topics: Education , Visualization , Students , Design , Engineering disciplines , Engineering students , Engineering teachers

Benchmarking Product Development Performance of Manufacturing Companies Using Analytic Network Process: A Field Study

Gu¨ls¸en Akman, Gu¨l E. Okudan

IDETC-CIE 2009; 611-621https://doi.org/10.1115/DETC2009-87696

Abstract

View Articletitled, Benchmarking Product Development Performance of Manufacturing Companies Using Analytic Network Process: A Field Study

PDF

Topics: Manufacturing , Product development , Innovation , Measurement systems , Reliability

Management of Transitioning Teams During Design Projects

Noe Vargas Hernandez, Jose G. Davila Rangel, Angel E. Delgado

IDETC-CIE 2009; 623-629https://doi.org/10.1115/DETC2009-87755

Abstract

View Articletitled, Management of Transitioning Teams During Design Projects

PDF

Topics: Design , Teams , Containment , Damage , Undergraduate students

Service Related Design

Designing a Service-Learning Design Project for a First-Year Engineering Course

Christopher B. Williams, Janis P. Terpenny, Richard M. Goff

IDETC-CIE 2009; 631-639https://doi.org/10.1115/DETC2009-87091

Abstract

View Articletitled, Designing a Service-Learning Design Project for a First-Year Engineering Course

PDF

Topics: Design , Engineering education , Students , Conceptual design , Design methodology , Engineering design , Project management , Project tasks , Reflection

The Study of the Interaction of Humans With Wheelchairs to Improve the Design

Shayne Gooch, Laura Hollingsworth, Tony Medland

IDETC-CIE 2009; 641-647https://doi.org/10.1115/DETC2009-87475

Abstract

View Articletitled, The Study of the Interaction of Humans With Wheelchairs to Improve the Design

PDF

Topics: Design , Wheelchairs , Mechanical admittance , Doors , Modeling , Propulsion , Surface roughness , Wheels

Upper-Extremity Prostheses: A Renewed Approach

Alwyn P. Johnson, Bradley Veatch

IDETC-CIE 2009; 649-656https://doi.org/10.1115/DETC2009-87538

Abstract

View Articletitled, Upper-Extremity Prostheses: A Renewed Approach

PDF

Topics: Prostheses , Manufacturing , Pinch effect , Design , Electrolytic corrosion , Plastics , Rendering , Rubber , Stress

The Design and Testing of a Low-Cost, Globally-Manufacturable, Multi-Speed Mobility Aid Designed for Use on Varied Terrain in Developing and Developed Countries

Amos G. Winter, V, Mario A. Bollini, Danielle H. DeLatte, Harrison F. O’Hanley, Natasha K. Scolnik

IDETC-CIE 2009; 657-663https://doi.org/10.1115/DETC2009-87609

Abstract

View Articletitled, The Design and Testing of a Low-Cost, Globally-Manufacturable, Multi-Speed Mobility Aid Designed for Use on Varied Terrain in Developing and Developed Countries

PDF

Topics: Design , Mechanical admittance , Testing , Developing nations , Wheelchairs , Levers , Propulsion , Roads , Rolling friction , Surface roughness

Young Design Engineer’s Paper Competition

Design, Fabrication and Industrial Application of a Miniature Hovercraft

Prerna Gera, Sayan Sarkar, Rameshwaranand Jha, Rishi Raj, Rishi Bardhan, Vikas, Siddharth Gupta

IDETC-CIE 2009; 665-674https://doi.org/10.1115/DETC2009-86177

Abstract

View Articletitled, Design, Fabrication and Industrial Application of a Miniature Hovercraft

PDF

Topics: Design , Manufacturing , Shapes , Stress , Brakes , Braking , Eddies (Fluid dynamics) , Innovation , Manufacturing industry , Pressure

On the Design of a Vertical Axis Wind Turbine for Use in Rural Communities

Allison Johnston, Jesse French, John Henshaw

IDETC-CIE 2009; 675-682https://doi.org/10.1115/DETC2009-86484

Abstract

View Articletitled, On the Design of a Vertical Axis Wind Turbine for Use in Rural Communities

PDF

Topics: Design , Turbines , Vertical axis wind turbines , Wind power , Pumps , Water , Wind turbines , Air compressors , China , Cranes

Design Workflow for Electronic Product With Safety Assessment Concept at the Early Stage

Jingyuan Huang, Xiang Wang

IDETC-CIE 2009; 683-690https://doi.org/10.1115/DETC2009-86963

Abstract

View Articletitled, Design Workflow for Electronic Product With Safety Assessment Concept at the Early Stage

PDF

Topics: Design , Electronic products , Safety , Workflow , Product design , Cycles , Developing nations , Liabilities , Manufacturing

Design of a Multi-Function Vector Bar

Kristen Domboski, Raymond McCauley, Mike Morton, Andrea Liem, Michael Keefe

IDETC-CIE 2009; 691-697https://doi.org/10.1115/DETC2009-87029

Abstract

View Articletitled, Design of a Multi-Function Vector Bar

PDF

Topics: Design , Teams , Computers , Engineering prototypes , Errors , Mechanical engineering , Metrology

Development of an Umbrella Checkout System: A Case Study of a Senior Capstone Design Project

Mark D. Fuge, Ben D. Berkowitz

IDETC-CIE 2009; 699-707https://doi.org/10.1115/DETC2009-87418

Abstract

View Articletitled, Development of an Umbrella Checkout System: A Case Study of a Senior Capstone Design Project

PDF

Topics: Design , Construction , Design engineering , Engineering prototypes , Traffic

Design of a Protective Curtain System for High Rotational Speed Agricultural Disc Mowers

Raquel Ciappi, Bradley Miller, Stephen Petfield, Christopher Uthgenannt, James Glancey, Kevin Smith, Melanie Harkcom

IDETC-CIE 2009; 709-718https://doi.org/10.1115/DETC2009-87570

Abstract

View Articletitled, Design of a Protective Curtain System for High Rotational Speed Agricultural Disc Mowers

PDF

Topics: Design , Disks , Engineering prototypes , Safety , Testing , Computer simulation , Cutting , Textiles , Weight (Mass)

21st International Conference on Design Theory and Methodology

Advances in Design Theory, Representations, Methods and Formalisms

Knowledge Driven Design Features for the Product Life Cycle of Engine Parts

Jan Tim Jagenberg, Erik A. Gilsdorf, Reiner Anderl, Thomas Bornkessel

IDETC-CIE 2009; 721-728https://doi.org/10.1115/DETC2009-86063

Abstract

View Articletitled, Knowledge Driven Design Features for the Product Life Cycle of Engine Parts

PDF

Topics: Cycles , Design , Engines , Product development , Aircraft engines , Manufacturing , Pressure

Study of Alternative Strategies to the Task Clarification Activity of the Market-Pull Product Development Process Model

Damien Motte

IDETC-CIE 2009; 729-738https://doi.org/10.1115/DETC2009-86410

Abstract

View Articletitled, Study of Alternative Strategies to the Task Clarification Activity of the Market-Pull Product Development Process Model

PDF

Topics: Product development , Modeling

Engineering Soft Reliability in Product Realization

Aylin Koca, Aarnout C. Brombacher, Jitesh H. Panchal, Farrokh Mistree

IDETC-CIE 2009; 739-751https://doi.org/10.1115/DETC2009-87261

Abstract

View Articletitled, Engineering <em>Soft Reliability</em> in Product Realization

PDF

Topics: Reliability

A Process-Centric Problem Formulation for Decision-Based Design

Stephanie C. Thompson, Christiaan J. J. Paredis

IDETC-CIE 2009; 753-762https://doi.org/10.1115/DETC2009-87421

Abstract

View Articletitled, A Process-Centric Problem Formulation for Decision-Based Design

PDF

Topics: Design , Tradeoffs , Economics , Uncertainty

Bioinspired and Sustainable Design

Effective Analogical Transfer Using Biological Descriptions Retrieved With Functional and Biologically Meaningful Keywords

Hyunmin Cheong, L. H. Shu

IDETC-CIE 2009; 763-773https://doi.org/10.1115/DETC2009-86680

Abstract

View Articletitled, Effective Analogical Transfer Using Biological Descriptions Retrieved With Functional and Biologically Meaningful Keywords

PDF

Topics: Biology , Design , Engineering design , Engineers

Supporting Biomimetic Design Through Categorization of Natural-Language Keyword-Search Results

Ji Ke, J. S. Wallace, L. H. Shu

IDETC-CIE 2009; 775-784https://doi.org/10.1115/DETC2009-86681

Abstract

View Articletitled, Supporting Biomimetic Design Through Categorization of Natural-Language Keyword-Search Results

PDF

Topics: Biology , Biomimetics , Design , Engineering design , Fuel cells

Sustainable Product Design by a Simultaneous Consideration of Pre-Life and End-of-Life of Products

Minjung Kwak, Harrison M. Kim

IDETC-CIE 2009; 785-797https://doi.org/10.1115/DETC2009-86811

Abstract

View Articletitled, Sustainable Product Design by a Simultaneous Consideration of Pre-Life and End-of-Life of Products

PDF

Topics: Product design , Sustainability , Design , Manufacturing

Developing a Bio-Inspired Design Repository Using Ontologies

Jamal Wilson, Patrick Chang, Sungshik Yim, David W. Rosen

IDETC-CIE 2009; 799-808https://doi.org/10.1115/DETC2009-87272

Abstract

View Articletitled, Developing a Bio-Inspired Design Repository Using Ontologies

PDF

Topics: Biomimetics , Design , Ontologies , Conceptual design , Databases , Modeling

Framing Sustainability in Human-Centered Product Design

Lora A. Oehlberg, Alice M. Agogino, Sara L. Beckman

IDETC-CIE 2009; 809-816https://doi.org/10.1115/DETC2009-87749

Abstract

View Articletitled, Framing Sustainability in Human-Centered Product Design

PDF

Topics: Design , Framing (Construction) , Product design , Structural frames , Sustainability , Engineers , Tradeoffs , Green design , Students

Computational Synthesis and Artificial Intelligence in Design

The Birth of Symbols in Design

Amitabha Mukerjee, Madan Mohan Dabbeeru

IDETC-CIE 2009; 817-827https://doi.org/10.1115/DETC2009-86709

Abstract

View Articletitled, The Birth of Symbols in Design

PDF

Topics: Design , Manifolds , Brittleness , Computer-aided design , Engines , Motors , Semantics

A Stochastic Graph Grammar Algorithm for Interactive Search

Matthew I. Campbell, Rahul Rai, Tolga Kurtoglu

IDETC-CIE 2009; 829-840https://doi.org/10.1115/DETC2009-86804

Abstract

View Articletitled, A Stochastic Graph Grammar Algorithm for Interactive Search

PDF

Topics: Algorithms , Conceptual design , Decision making , Design , Preferences , Topology

A Framework for Computational Design Synthesis Based on Graph-Grammars and Function-Behavior-Structure

Bergen Helms, Kristina Shea, Frank Hoisl

IDETC-CIE 2009; 841-851https://doi.org/10.1115/DETC2009-86851

Abstract

View Articletitled, A Framework for Computational Design Synthesis Based on Graph-Grammars and Function-Behavior-Structure

PDF

Topics: Design

Support for the Use of Hierarchical Temporal Memory Systems in Automated Design Evaluation: A First Experiment

Josh Hartung, Jay McCormack, Frank Jacobus

IDETC-CIE 2009; 853-862https://doi.org/10.1115/DETC2009-87702

Abstract

View Articletitled, Support for the Use of Hierarchical Temporal Memory Systems in Automated Design Evaluation: A First Experiment

PDF

Topics: Design , Design automation , Storage

Customer Needs and Requirements Engineering

A Comparative Study of Quantitative Scales to Populate Affordance Structure Matrices

Jonathan R. A. Maier, Rayann Sachs, Georges M. Fadel

IDETC-CIE 2009; 863-872https://doi.org/10.1115/DETC2009-86524

Abstract

View Articletitled, A Comparative Study of Quantitative Scales to Populate Affordance Structure Matrices

PDF

Topics: Cutting , Noise (Sound)

Lightweight Engineering of Military Vehicles Through Requirements Analysis and Function Integration

Jonathan R. A. Maier, James M. McLellan, Gregory Mocko, Georges M. Fadel, Mark Brudnak

IDETC-CIE 2009; 873-883https://doi.org/10.1115/DETC2009-86562

Abstract

View Articletitled, Lightweight Engineering of Military Vehicles Through Requirements Analysis and Function Integration

PDF

Topics: Military vehicles , Vehicles , Weight (Mass) , Corporate average fuel economy , Fuel efficiency , Military systems , Modeling , National defense , Transportation systems , US Department of Defense

Suitability of Product Development Methods for Hybrid Products as Bundles of Classic Products, Software and Service Elements

Marina Berkovich, Jan Marco Leimeister, Helmut Krcmar

IDETC-CIE 2009; 885-894https://doi.org/10.1115/DETC2009-86939

Abstract

View Articletitled, Suitability of Product Development Methods for Hybrid Products as Bundles of Classic Products, Software and Service Elements

PDF

Topics: Computer software , Product development , Engineering disciplines , Product engineering

Grammatical Evolution of Technical Processes

Tino Stankovic´, Kristina Shea, Mario Sˇtorga, Dorian Marjanovic´

IDETC-CIE 2009; 895-904https://doi.org/10.1115/DETC2009-87042

Abstract

View Articletitled, Grammatical Evolution of Technical Processes

PDF

Topics: Conceptual design , Creativity , Design , Optimization , Probability

The Characteristics of Innovative, Mechanical Products

Matthew N. Saunders, Carolyn C. Seepersad, Katja Ho¨ltta¨-Otto

IDETC-CIE 2009; 905-914https://doi.org/10.1115/DETC2009-87382

Abstract

View Articletitled, The Characteristics of Innovative, Mechanical Products

PDF

Topics: Architecture , Design , Engineering design , Engineers , Innovation , Mechanical products

Design Behavior Study

Engineering Work and Email: An Analysis of the Information Content of Email in a Major Systems Engineering Project

James Wasiak, Ben Hicks, Andy Dong, Linda Newnes

IDETC-CIE 2009; 915-925https://doi.org/10.1115/DETC2009-86832

Abstract

View Articletitled, Engineering Work and Email: An Analysis of the Information Content of Email in a Major Systems Engineering Project

PDF

Topics: Systems engineering , Knowledge management , Design , Life cycle management , Software design

Acceptance and Divergence From Engineering Design Procedures Implicating Knowledge Flow

Ole Kjeldal Jensen, Saeema Ahmed

IDETC-CIE 2009; 927-936https://doi.org/10.1115/DETC2009-86985

Abstract

View Articletitled, Acceptance and Divergence From Engineering Design Procedures Implicating Knowledge Flow

PDF

Topics: Corrective actions , Design , Design methodology , Drilling rigs , Engineering design , Engineers , Feedback , Flow (Dynamics) , Knowledge management , Product development

How Cultural Characteristics Influence Design Processes: An Empirical Study

Vivek Gautam, Lucienne Blessing

IDETC-CIE 2009; 937-943https://doi.org/10.1115/DETC2009-87214

Abstract

View Articletitled, How Cultural Characteristics Influence Design Processes: An Empirical Study

PDF

Topics: Engineering design processes , Design , China , Product development

Relations Between Design Activities and Interactional Characteristics in Novice-Expert Design Consultations: ‘What’ is Done ‘How’

Fleur Deken, Maaike S. Kleinsmann, Marco Aurisicchio, Rob B. Bracewell, Kristina Lauche

IDETC-CIE 2009; 945-953https://doi.org/10.1115/DETC2009-87602

Abstract

View Articletitled, Relations Between Design Activities and Interactional Characteristics in Novice-Expert Design Consultations: ‘What’ is Done ‘How’

PDF

Topics: Design

Relationship Conflict and Feeling Communication in Design Teams

Celeste Roschuni, Lora Oehlberg, Sara Beckman, Alice M. Agogino

IDETC-CIE 2009; 955-964https://doi.org/10.1115/DETC2009-87626

Abstract

View Articletitled, Relationship Conflict and Feeling Communication in Design Teams

PDF

Topics: Design , Teams

Design Creativity and Innovation

Increasing Innovation in Multi-Function Systems: Evaluation and Experimentation of Two Ideation Methods for Design

Jason M. Weaver, Rachel Kuhr, Dennis Wang, Richard H. Crawford, Kristin L. Wood, Dan Jensen, Julie S. Linsey

IDETC-CIE 2009; 965-983https://doi.org/10.1115/DETC2009-86403

Abstract

View Articletitled, Increasing Innovation in Multi-Function Systems: Evaluation and Experimentation of Two Ideation Methods for Design

PDF

Topics: Design , Innovation

An Empirical Evaluation of Novelty-SAPPhIRE Relationship

V. Srinivasan, Amaresh Chakrabarti

IDETC-CIE 2009; 985-994https://doi.org/10.1115/DETC2009-86668

Abstract

View Articletitled, An Empirical Evaluation of Novelty-SAPPhIRE Relationship

PDF

Topics: Sapphire , Design , Conceptual design

Design Fixation on Non-Verbal Stimuli: The Influence of Simple vs. Rich Pictorial Information on Design Problem-Solving

Carlos Cardoso, Petra Badke-Schaub, Ana Luz

IDETC-CIE 2009; 995-1002https://doi.org/10.1115/DETC2009-86826

Abstract

View Articletitled, Design Fixation on Non-Verbal Stimuli: The Influence of Simple vs. Rich Pictorial Information on Design Problem-Solving

PDF

Topics: Design , Creativity , Engineering design processes , Industrial design , Innovation , Performance , Students

A Method to Generate and Evaluate a Creative Design Idea by Focusing on Associative Process

Eiko Yamamoto, Futoshi Mukai, Nor Fasiha Mohd Yusof, Toshiharu Taura, Yukari Nagai

IDETC-CIE 2009; 1003-1011https://doi.org/10.1115/DETC2009-87193

Abstract

View Articletitled, A Method to Generate and Evaluate a Creative Design Idea by Focusing on Associative Process

PDF

Topics: Creativity , Design

Design Team Convergence: The Influence of Example Solution Quality

Katherine Fu, Jonathan Cagan, Kenneth Kotovsky

IDETC-CIE 2009; 1013-1022https://doi.org/10.1115/DETC2009-87219

Abstract

View Articletitled, Design Team Convergence: The Influence of Example Solution Quality

PDF

Topics: Design , Teams , Engineering design

Functional Modeling in Design

Thesaurus for Natural-Language-Based Conceptual Design

Eiko Yamamoto, Toshiharu Taura, Shota Ohashi, Masaki Yamamoto

IDETC-CIE 2009; 1023-1032https://doi.org/10.1115/DETC2009-86943

Abstract

View Articletitled, Thesaurus for Natural-Language-Based Conceptual Design

PDF

Topics: Conceptual design , Engineering design , Equations , Natural language processing

Flow State Logic (FSL) for Analysis of Failure Propagation in Early Design

David Jensen, Irem Y. Tumer, Tolga Kurtoglu

IDETC-CIE 2009; 1033-1043https://doi.org/10.1115/DETC2009-87064

Abstract

View Articletitled, Flow State Logic (FSL) for Analysis of Failure Propagation in Early Design

PDF

Topics: Design , Failure analysis , Flow (Dynamics) , Failure , Event history analysis , Reliability , Complex systems , Conceptual design , Modeling , Risk analysis

Some Ontological Distinctions of Function Based on the Role Concept

Yoshinobu Kitamura, Riichiro Mizoguchi

IDETC-CIE 2009; 1045-1054https://doi.org/10.1115/DETC2009-87168

Abstract

View Articletitled, Some Ontological Distinctions of Function Based on the Role Concept

PDF

Topics: Cycles , Design , Engineering design , Engineers , Manufacturing , Modeling , Ontologies

Investigation of the Interpretability of Three Function Structure Representations: A User Study

Jonathan Thomas, Chiradeep Sen, Gregory M. Mocko, Joshua D. Summers, Georges M. Fadel

IDETC-CIE 2009; 1055-1068https://doi.org/10.1115/DETC2009-87381

Abstract

View Articletitled, Investigation of the Interpretability of Three Function Structure Representations: A User Study

PDF

Topics: Computers , Conceptual design , Design , Dimensions , Graduate students , Mechanical engineering , Students , Teams

Product Family and Architecture Design Methods

Four Dimensions of Design Similarity

Arjun Ranawat, Katja Ho¨ltta¨-Otto

IDETC-CIE 2009; 1069-1077https://doi.org/10.1115/DETC2009-87085

Abstract

View Articletitled, Four Dimensions of Design Similarity

PDF

Topics: Design , Dimensions , Shapes , Texture (Materials)

Validating Module Heuristics on Large Scale Products

Rachel Day, Robert B. Stone, Katie Grantham Lough

IDETC-CIE 2009; 1079-1087https://doi.org/10.1115/DETC2009-87099

Abstract

View Articletitled, Validating Module Heuristics on Large Scale Products

PDF

Topics: Design , Modeling , Risk

Investigating the Use of (Re)Configurability to Reduce Product Family Cost and Mitigate Performance Losses

Phil Cormier, David Van Horn, Kemper Lewis

IDETC-CIE 2009; 1089-1100https://doi.org/10.1115/DETC2009-87439

Abstract

View Articletitled, Investigating the Use of (Re)Configurability to Reduce Product Family Cost and Mitigate Performance Losses

PDF

Topics: Design , Design methodology , Tradeoffs

Incorporating the Option Value of Product Family Variants in Material and Process Selection

Michael D. Johnson, Amlan Nanda

IDETC-CIE 2009; 1101-1109https://doi.org/10.1115/DETC2009-87493

Abstract

View Articletitled, Incorporating the Option Value of Product Family Variants in Material and Process Selection

PDF

Topics: Economic analysis , Instrumentation , Manufacturing , Preferences , Product development , Risk , Teams

Quantitative and Probabilistic Elements in Design Theory

UAS Mission Path Planning System (MPPS) Using Hybrid-Game Coupled to Multi-Objective Optimiser

DongSeop Lee, Jacques Periaux, Luis Felipe Gonzalez

IDETC-CIE 2009; 1111-1120https://doi.org/10.1115/DETC2009-86749

Abstract

View Articletitled, UAS Mission Path Planning System (MPPS) Using Hybrid-Game Coupled to Multi-Objective Optimiser

PDF

Topics: Path planning , Collisions (Physics) , Optimization , Design , Dimensions , Evolutionary algorithms , Genetic algorithms , Splines

A Methodology for Quantifying the Perceived Environmental Friendliness of Vehicle Silhouettes in Engineering Design

Tahira Reid, Richard Gonzalez, Panos Papalambros

IDETC-CIE 2009; 1121-1130https://doi.org/10.1115/DETC2009-87095

Abstract

View Articletitled, A Methodology for Quantifying the Perceived Environmental Friendliness of Vehicle Silhouettes in Engineering Design

PDF

Topics: Design , Engineering design , Vehicles , Modeling , Decision making , Design methodology , Experimental design , Optimization , Statistical analysis

Robust Design Method for Diverse Conditions

Atsuki Watai, Satoshi Nakatsuka, Takeo Kato, Yoshiki Ujiie, Yoshiyuki Matsuoka

IDETC-CIE 2009; 1131-1138https://doi.org/10.1115/DETC2009-87108

Abstract

View Articletitled, Robust Design Method for Diverse Conditions

PDF

Topics: Design methodology , Design , Probability , Density , Vehicles

Inventing a New Method in Statics Through Knowledge in Kinematics

Offer Shai, Yoram Reich

IDETC-CIE 2009; 1139-1145https://doi.org/10.1115/DETC2009-87548

Abstract

View Articletitled, Inventing a New Method in Statics Through Knowledge in Kinematics

PDF

Topics: Cables , Design , Design methodology , Engineering disciplines , Inventions , Kinematics , Statics , Struts (Engineering) , Tensegrity structures

Robust Development Metrics and Methods

Analysis and Visualization of Project Structure Using Linkography: Focussing Project Risk Management

Kilian Gericke, Bjo¨rn Kleinod, Lucienne Blessing

IDETC-CIE 2009; 1147-1153https://doi.org/10.1115/DETC2009-86460

Abstract

View Articletitled, Analysis and Visualization of Project Structure Using Linkography: Focussing Project Risk Management

PDF

Topics: Risk management , Visualization , Dynamics (Mechanics) , Performance , Product development , Transparency

Lean Thinking and Product Innovation in the Furniture Industry

Albertina Pereira Medeiros, Silene Seibel, Renato Natal Jorge, Anto´nio Augusto Fernandes

IDETC-CIE 2009; 1155-1162https://doi.org/10.1115/DETC2009-86630

Abstract

View Articletitled, Lean Thinking and Product Innovation in the Furniture Industry

PDF

Topics: Chain , Flow (Dynamics) , Innovation , Manufacturing , Pressure , Product design , Product development , Stress

Methods of Verification and Change Management for Quality Control of Engineering Artifacts

Michael Van Wie, Scott Flechsig

IDETC-CIE 2009; 1163-1176https://doi.org/10.1115/DETC2009-87063

Abstract

View Articletitled, Methods of Verification and Change Management for Quality Control of Engineering Artifacts

PDF

Topics: Change management , Quality control , Design , Design methodology

A Model for Product Development Performance Monitoring Based on Analytic Network Process

Gu¨ls¸en Akman, Gu¨l E. Okudan

IDETC-CIE 2009; 1177-1186https://doi.org/10.1115/DETC2009-87689

Abstract

View Articletitled, A Model for Product Development Performance Monitoring Based on Analytic Network Process

PDF

Topics: Product development , Innovation , Manufacturing , Measurement systems , Reliability

Multifunctional Enterprise Readiness: Beyond the Policy of Build-Test-Fix Cyclic Rework

Victor Tang, Kevin N. Otto

IDETC-CIE 2009; 1187-1195https://doi.org/10.1115/DETC2009-87721

Abstract

View Articletitled, Multifunctional Enterprise Readiness: Beyond the Policy of Build-Test-Fix Cyclic Rework

PDF

Topics: Design , Engineering prototypes , Failure , Governments , Hardware , Manufacturing , NASA , Product design , Product development

Product Architecture Definition and Analysis Using Matrix-Based Multiple-Domain Approaches

Frank Deubzer, Udo Lindemann

IDETC-CIE 2009; 1197-1205https://doi.org/10.1115/DETC2009-87782

Abstract

View Articletitled, Product Architecture Definition and Analysis Using Matrix-Based Multiple-Domain Approaches

PDF

Topics: Algorithms , Architecture , Creativity , Design , Impulse (Physics) , Modeling , Performance , Product design

Vision in Engineering Design

Metrics for Evaluating and Optimizing the Barrier and Time to Reverse Engineer a Product

Stephen P. Harston, Christopher A. Mattson

IDETC-CIE 2009; 1207-1220https://doi.org/10.1115/DETC2009-86781

Abstract

View Articletitled, Metrics for Evaluating and Optimizing the Barrier and Time to Reverse Engineer a Product

PDF

Topics: Reverse engineering

Concept Diagramming Software for Engineering Design Support: A Review and Synthesis of Studies

Nathan L. Eng, Rob H. Bracewell, P. John Clarkson

IDETC-CIE 2009; 1221-1234https://doi.org/10.1115/DETC2009-86840

Abstract

View Articletitled, Concept Diagramming Software for Engineering Design Support: A Review and Synthesis of Studies

PDF

Topics: Computer software , Design , Engineering design , Conceptual design , Engineering disciplines , Flow (Dynamics) , Machinery

A Testing Method and Cognitive Model of Human Diagram Understanding for Automating Design Sketch Recognition

Mark D. Fuge, Levent Burak Kara

IDETC-CIE 2009; 1235-1247https://doi.org/10.1115/DETC2009-87398

Abstract

View Articletitled, A Testing Method and Cognitive Model of Human Diagram Understanding for Automating Design Sketch Recognition

PDF

Topics: Design , Testing , Ambiguity , Computers , Education , Engineering design , Mechanical engineering

Sketching in Design: Easily Influencing Behavior

Ashley Ruocco, Sophoria Westmoreland, Linda C. Schmidt

IDETC-CIE 2009; 1249-1256https://doi.org/10.1115/DETC2009-87503

Abstract

View Articletitled, Sketching in Design: Easily Influencing Behavior

PDF

Topics: Design , Students , Computer-aided design , Conceptual design , Design engineering , Economics , Engineering design , Engineering education , Engineering students , Preferences

Innovation in Product Form and Function: Customer Perception of Their Value

Taehyun Kim, Gu¨l E. Okudan, Gu¨rdal Ertek

IDETC-CIE 2009; 1257-1265https://doi.org/10.1115/DETC2009-87701

Abstract

View Articletitled, Innovation in Product Form and Function: Customer Perception of Their Value

PDF

Topics: Design , Fittings , Innovation , Product design , Regression analysis

All Years

Proceedings Papers

14th Design for Manufacturing and the Life Cycle Conference

Cost Estimation and Total Cost of Ownership

Design for Mass Customization, Design for Service, Design for Layered Manufacturing, and Design for Quality

Design for Supply Chain

Integrated Product and Process Development

Manufacturability Analysis During Conceptual Design

Robust Design and Variation Management

Sustainable Design

Theoretical Foundations for Design and Manufacturing Integration

6th Symposium on International Design and Design Education

Best Practices With Emphasis on Assessment

Creativity in Engineering Design

Design Education in Distance Learning Settings

Design Methodology Case Studies

Interdisciplinary Design

International Practices

Service Related Design

Young Design Engineer’s Paper Competition

21st International Conference on Design Theory and Methodology

Advances in Design Theory, Representations, Methods and Formalisms

Bioinspired and Sustainable Design

Computational Synthesis and Artificial Intelligence in Design

Customer Needs and Requirements Engineering

Design Behavior Study

Design Creativity and Innovation

Functional Modeling in Design

Product Family and Architecture Design Methods

Quantitative and Probabilistic Elements in Design Theory

Robust Development Metrics and Methods

Vision in Engineering Design