Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 6: ASME Power Transmission and Gearing Conference; 3rd International Conference on Micro- and Nanosystems; 11th International Conference on Advanced Vehicle and Tire Technologies

ASME Power Transmission and Gearing Conference

Gear Design and Analysis

Measurement Over Balls of Conical Involute Gears

Carlo Innocenti

IDETC-CIE 2009; 3-11https://doi.org/10.1115/DETC2009-86229

Abstract

View Articletitled, Measurement Over Balls of Conical Involute Gears

PDF

Topics: Gears , Algebra

Computerized Design of Gear Drives With Modified Elliptical Centrodes

Alfonso Fuentes, Ignacio Gonzalez-Perez, Faydor L. Litvin, Kenichi Hayasaka

IDETC-CIE 2009; 13-19https://doi.org/10.1115/DETC2009-86241

Abstract

View Articletitled, Computerized Design of Gear Drives With Modified Elliptical Centrodes

PDF

Topics: Design , Mechanical drives , Gears , Linkages , Cycles

New Method of a Calculation of Equidistant Coordinates of an Involute Tooth Profile for FEM Calculations of Gears

Milos Nemcek, Zdenek Dejl

IDETC-CIE 2009; 21-28https://doi.org/10.1115/DETC2009-86249

Abstract

View Articletitled, New Method of a Calculation of Equidistant Coordinates of an Involute Tooth Profile for FEM Calculations of Gears

PDF

Topics: Finite element methods , Finite element model , Gears , Computer software , Mechanical engineering , Numerical analysis , Shapes , Stress analysis (Engineering)

Computerized Design of Muti-Gear Drives for Function Generation

Ignacio Gonzalez-Perez, Alfonso Fuentes, Faydor L. Litvin, Kenichi Hayasaka

IDETC-CIE 2009; 29-38https://doi.org/10.1115/DETC2009-86252

Abstract

View Articletitled, Computerized Design of Muti-Gear Drives for Function Generation

PDF

Topics: Design , Gears , Mechanical drives , Pressure , Shapes

Self-Locking of 2S-C Type Planetary Gear Train Composed of External Gears

Kiyotaka Ikejo, Kazuteru Nagamura, Tuneji Yada, Yoshiya Kagari

IDETC-CIE 2009; 39-46https://doi.org/10.1115/DETC2009-86291

Abstract

View Articletitled, Self-Locking of 2S-C Type Planetary Gear Train Composed of External Gears

PDF

Topics: Gears , Planetary gears , Trains , Gear trains , Weight (Mass)

Development of a Hybrid Involute Gear Profile

B. Levi Haupt, Isaac R. Jones, Robert H. Todd

IDETC-CIE 2009; 47-59https://doi.org/10.1115/DETC2009-86406

Abstract

View Articletitled, Development of a Hybrid Involute Gear Profile

PDF

Topics: Gears

Tooth Surface Error Correction for Face-Hobbed Hypoid Gears

Qi Fan

IDETC-CIE 2009; 61-69https://doi.org/10.1115/DETC2009-86548

Abstract

View Articletitled, Tooth Surface Error Correction for Face-Hobbed Hypoid Gears

PDF

Topics: Errors , Spiral bevel gears

Lubricant Influence on Gear Efficiency

Klaus Michaelis, Bernd-Robert Ho¨hn, Andreas Doleschel

IDETC-CIE 2009; 71-80https://doi.org/10.1115/DETC2009-86663

Abstract

View Articletitled, Lubricant Influence on Gear Efficiency

PDF

Topics: Gears , Lubricants , Stress , Viscosity , Boundary lubrication , Friction , Geometry , Lubrication , Mechanical drives , Minerals

A Mathematical-Numerical Model to Calculate Load Distribution, Contact Stiffness and Transmission Error in Involute Spur Gears

Mehdi Mohammadpour, Iraj Mirzaee, Shahram Khalilarya

IDETC-CIE 2009; 81-87https://doi.org/10.1115/DETC2009-86676

Abstract

View Articletitled, A Mathematical-Numerical Model to Calculate Load Distribution, Contact Stiffness and Transmission Error in Involute Spur Gears

PDF

Topics: Errors , Spur gears , Stiffness , Stress , Finite element analysis , Geometry , Numerical analysis

The Wolfrom Gear Train: A Case of Highest-Complexity Related Modifications of the Tooth Meshing

Kiril Arnaudov, Dimitar Karaivanov

IDETC-CIE 2009; 89-94https://doi.org/10.1115/DETC2009-86793

Abstract

View Articletitled, The Wolfrom Gear Train: A Case of Highest-Complexity Related Modifications of the Tooth Meshing

PDF

Topics: Gear trains

Influence of Gear Rim Deflections on Planetary Gear Set Behavior

H. Ligata, A. Kahraman, A. Singh

IDETC-CIE 2009; 95-103https://doi.org/10.1115/DETC2009-86838

Abstract

View Articletitled, Influence of Gear Rim Deflections on Planetary Gear Set Behavior

PDF

Topics: Deflection , Gears , Planetary gears , Stress , Splines , Design , Displacement , Errors , Probes , Strain gages

Stress Analysis of Spherical Gear Sets

Li-Chi Chao, Chung-Biau Tsay

IDETC-CIE 2009; 105-111https://doi.org/10.1115/DETC2009-86843

Abstract

View Articletitled, Stress Analysis of Spherical Gear Sets

PDF

Topics: Gears , Stress analysis (Engineering) , Gear teeth , Finite element methods , Bending (Stress) , Boundary-value problems , Design , Helical gears , Materials properties , Mechanical drives

Robust Optimization of the Loaded Contact Pattern in Hypoid Gears With Uncertain Misalignments

M. Gabiccini, A. Bracci, M. Guiggiani

IDETC-CIE 2009; 113-123https://doi.org/10.1115/DETC2009-86932

Abstract

View Articletitled, Robust Optimization of the Loaded Contact Pattern in Hypoid Gears With Uncertain Misalignments

PDF

Topics: Optimization , Spiral bevel gears , Errors , Robustness , Machine tools , Manufacturing

Torsional Rigidity of a Cycloid Drive Considering Finite Bearing and Hertz Contact Stiffness

Kyoung-hong Kim, Chun-se Lee, Hyeong-Joon Ahn

IDETC-CIE 2009; 125-130https://doi.org/10.1115/DETC2009-87092

Abstract

View Articletitled, Torsional Rigidity of a Cycloid Drive Considering Finite Bearing and Hertz Contact Stiffness

PDF

Topics: Bearings , Stiffness , Disks , Finite element analysis , Pressure , Rollers , Rotation , Springs

Simplified Calculation Method for the Efficiency of Involute Spur Gears

Jose´ I. Pedrero, Miguel Pleguezuelos, Marta Mun˜oz

IDETC-CIE 2009; 131-138https://doi.org/10.1115/DETC2009-87179

Abstract

View Articletitled, Simplified Calculation Method for the Efficiency of Involute Spur Gears

PDF

Topics: Computational methods , Spur gears , Stress , Friction , Gears , Computation , Helical gears , Pressure , Stiffness

Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-Palloid System

Kazumasa Kawasaki, Isamu Tsuji

IDETC-CIE 2009; 139-147https://doi.org/10.1115/DETC2009-87302

Abstract

View Articletitled, Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-Palloid System

PDF

Topics: Spiral bevel gears , Errors , Gears , Coordinate measuring machines , Engineering simulation , Manufacturing , Polynomials , Simulation

Computational Nonlinear Vibration Analysis of Gear Pairs Using a Three-Dimensional Model

Tugan Eritenel, Robert G. Parker

IDETC-CIE 2009; 149-165https://doi.org/10.1115/DETC2009-87485

Abstract

View Articletitled, Computational Nonlinear Vibration Analysis of Gear Pairs Using a Three-Dimensional Model

PDF

Topics: Gears , Nonlinear vibration , Three-dimensional models , Stiffness , Deflection , Springs , Vibration , Degrees of freedom , Dynamic analysis , Finite element analysis

Vibration Modes of Helical Planetary Gears

Tugan Eritenel, Robert G. Parker

IDETC-CIE 2009; 167-176https://doi.org/10.1115/DETC2009-87494

Abstract

View Articletitled, Vibration Modes of Helical Planetary Gears

PDF

Topics: Planetary gears , Vibration , Gears , Bearings , Degrees of freedom , Dimensions , Equations of motion , Modal analysis , Stiffness

Gear Dynamics and Noise

Factors Affecting Transmission Error in Helical Synchronous Belt With Error on Belt Side Face Under Bidirectional Operation

Masanori Kagotani, Hiroyuki Ueda

IDETC-CIE 2009; 177-186https://doi.org/10.1115/DETC2009-86132

Abstract

View Articletitled, Factors Affecting Transmission Error in Helical Synchronous Belt With Error on Belt Side Face Under Bidirectional Operation

PDF

Topics: Belts , Errors , Timing belts , Pulleys , Flanges , Torque , Tension , Finishing , Noise (Sound) , Rotation

Approximate Closed-Form Solutions for the Shift Mechanics of Rubber Belt Variators

Marco Cammalleri, Francesco Sorge

IDETC-CIE 2009; 187-196https://doi.org/10.1115/DETC2009-86638

Abstract

View Articletitled, Approximate Closed-Form Solutions for the Shift Mechanics of Rubber Belt Variators

PDF

Topics: Belts , Rubber , Pulleys , Approximation , Equilibrium (Physics) , Mechanical behavior , Motorcycles , Theorems (Mathematics) , Theoretical analysis , V-belts

Transmission Error as Gear Noise Excitation

Mats Henriksson, Yuet-Yan Pang

IDETC-CIE 2009; 197-203https://doi.org/10.1115/DETC2009-86695

Abstract

View Articletitled, Transmission Error as Gear Noise Excitation

PDF

Topics: Errors , Excitation , Gears , Noise (Sound) , Geometry , Design , Friction , Mechanical drives , Trucks

A Frequency Domain Finite Element Approach for Three-Dimensional Gear Dynamics

Christopher G. Cooley, Robert G. Parker, Sandeep M. Vijayakar

IDETC-CIE 2009; 205-215https://doi.org/10.1115/DETC2009-87525

Abstract

View Articletitled, A Frequency Domain Finite Element Approach for Three-Dimensional Gear Dynamics

PDF

Topics: Dynamics (Mechanics) , Finite element analysis , Gears , Dynamic response , Errors , Simulation , Contact mechanics , Dynamic models , Excitation , Mechanical drives

Dynamic Modeling and Analysis of a Planetary Gear Involving Tooth Wedging and Bearing Clearance Nonlinearity

Yi Guo, Robert G. Parker

IDETC-CIE 2009; 217-231https://doi.org/10.1115/DETC2009-87553

Abstract

View Articletitled, Dynamic Modeling and Analysis of a Planetary Gear Involving Tooth Wedging and Bearing Clearance Nonlinearity

PDF

Topics: Bearings , Clearances (Engineering) , Dynamic modeling , Planetary gears , Dynamic response , Failure , Gear teeth , Gravity (Force) , Separation (Technology) , Simulation results

Gear Manufacturing and Tribology

Advanced Manufacture of Spiral Bevel Gears on CNC Hypoid Generating Machine

Vilmos V. Simon

IDETC-CIE 2009; 233-243https://doi.org/10.1115/DETC2009-86119

Abstract

View Articletitled, Advanced Manufacture of Spiral Bevel Gears on CNC Hypoid Generating Machine

PDF

Topics: Computer numerical control machine tools , Machinery , Spiral bevel gears , Generators , Algorithms , Blanks , Computer software , Gears , Kinematics , Machine tools

An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears Having Local and Global Surface Deviations

M. Kolivand, A. Kahraman

IDETC-CIE 2009; 245-254https://doi.org/10.1115/DETC2009-86786

Abstract

View Articletitled, An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears Having Local and Global Surface Deviations

PDF

Topics: Spiral bevel gears , Errors , Manufacturing , Wear , Gear teeth , Gears , Machinery , Stress

Simulation of Double Flank Gear Rolling Testing

Chia-Chang Liu, Kao- Hui Lin

IDETC-CIE 2009; 255-262https://doi.org/10.1115/DETC2009-86970

Abstract

View Articletitled, Simulation of Double Flank Gear Rolling Testing

PDF

Topics: Gears , Simulation , Testing , Errors , Shorelines

Simulation and Optimization of Gear Form Grinding

Francesco Rosa, Carlo Gorla

IDETC-CIE 2009; 263-270https://doi.org/10.1115/DETC2009-87199

Abstract

View Articletitled, Simulation and Optimization of Gear Form Grinding

PDF

Topics: Gears , Grinding , Optimization , Simulation , Design , Geometry , Emissions , Noise (Sound) , Topology , Disks

Gear Strength and Durability

Loaded Tooth Contact Analysis and Stresses in Spiral Bevel Gears

Vilmos V. Simon

IDETC-CIE 2009; 271-279https://doi.org/10.1115/DETC2009-86164

Abstract

View Articletitled, Loaded Tooth Contact Analysis and Stresses in Spiral Bevel Gears

PDF

Topics: Spiral bevel gears , Stress , Errors , Gears , Pressure , Computer software , Displacement , Gear teeth

Improvement of Bending Fatigue Strength for Hybrid Cords With Carbon and Glass Fibers

Masamori Furusawa, Yuuya Tsukada, Takuya Morimoto, Hiroshi Iizuka

IDETC-CIE 2009; 281-288https://doi.org/10.1115/DETC2009-86323

Abstract

View Articletitled, Improvement of Bending Fatigue Strength for Hybrid Cords With Carbon and Glass Fibers

PDF

Topics: Carbon , Cordage , Fatigue strength , Glass fibers , Carbon fibers , Rubber , Belts , Stiffness , Timing belts , Aramid fibers

Crowning Techniques in Aerospace Actuation Gearing

Anngwo Wang, Lotfi El-Bayoumy

IDETC-CIE 2009; 289-294https://doi.org/10.1115/DETC2009-86358

Abstract

View Articletitled, Crowning Techniques in Aerospace Actuation Gearing

PDF

Topics: Aerospace industry , Stress , Bearings , Deflection , Damage

Effects of Case Depth, Side-Face Carburizing and Helix Angle on Residual Stress and Bending Fatigue Strength of Case-Carburized Helical Gears

Kouitsu Miyachika, Kazuaki Ando, Wei-Dong Xue, Imaduddin Helmi Bin Wan Nordin

IDETC-CIE 2009; 295-304https://doi.org/10.1115/DETC2009-87313

Abstract

View Articletitled, Effects of Case Depth, Side-Face Carburizing and Helix Angle on Residual Stress and Bending Fatigue Strength of Case-Carburized Helical Gears

PDF

Topics: Carburization , Fatigue strength , Finite element methods , Gears , Helical gears , Stress

Transmissions

Modeling Techniques for Dynamic Analysis of a Helicopter Transmission System

David B. Stringer, Paul E. Allaire

IDETC-CIE 2009; 305-311https://doi.org/10.1115/DETC2009-86112

Abstract

View Articletitled, Modeling Techniques for Dynamic Analysis of a Helicopter Transmission System

PDF

Topics: Dynamic analysis , Modeling , Mode shapes , Wings , Eigenvalues , Finite element analysis , Finite element model , Mechanical drives , Optimization algorithms , Rotors

Hertzian Contact Pressure Analysis of Frictional Coupling Elements of Multidisk Stepless Transmission With Initial Line Contact

S. A. Lukowski, L. A. Medeksza, D. N. Kunz, Jeff Hoerning

IDETC-CIE 2009; 313-319https://doi.org/10.1115/DETC2009-86255

Abstract

View Articletitled, Hertzian Contact Pressure Analysis of Frictional Coupling Elements of Multidisk Stepless Transmission With Initial Line Contact

PDF

Topics: Deformation , Disks , Pressure

Conceptual Design of a Chain Speed Increaser for Small Hydropower Stations

Codruta Jaliu, Radu Saulescu, Dorin Valentin Diaconescu, Mircea Neagoe

IDETC-CIE 2009; 321-328https://doi.org/10.1115/DETC2009-86982

Abstract

View Articletitled, Conceptual Design of a Chain Speed Increaser for Small Hydropower Stations

PDF

Topics: Chain , Conceptual design , Hydroelectric power stations

Three Dimensional Virtual Modeling and Analysis Methods of Embedded Drivetrains

Steven Mulski, Lutz Mauer

IDETC-CIE 2009; 329-335https://doi.org/10.1115/DETC2009-87224

Abstract

View Articletitled, Three Dimensional Virtual Modeling and Analysis Methods of Embedded Drivetrains

PDF

Topics: Modeling , Simulation , Vibration , Bearings , Computation , Durability , Engineering disciplines , Engineering prototypes , Fourier transforms , Linear systems

3rd International Conference on Micro- and Nanosystems

Applied Mechanics, Contact Mechanics and Tribology at Micro- and Nano-Scales

Nano- and Component Level Friction of Rubber Seals in Dispensing Devices

Polina Prokopovich, Stephanos Theodossiades, Homer Rahnejat, Darren Hodson

IDETC-CIE 2009; 339-344https://doi.org/10.1115/DETC2009-86035

Abstract

View Articletitled, Nano- and Component Level Friction of Rubber Seals in Dispensing Devices

PDF

Topics: Adhesion , Friction , Rubber , Valves

Molecular Dynamics Study of Success Evaluation for Metallic Nanoparticles Manipulation on Gold Substrate

Seyed Hanif Mahboobi, Ali Meghdari, Nader Jalili

IDETC-CIE 2009; 345-346https://doi.org/10.1115/DETC2009-86398

Abstract

View Articletitled, Molecular Dynamics Study of Success Evaluation for Metallic Nanoparticles Manipulation on Gold Substrate

PDF

Topics: Molecular dynamics , Nanoparticles , Simulation , Transition metals

Adhesion Between Similar and Dissimilar Thin-Walled Micro-Structures

Carmel Majidi, Kai-Tak Wan

IDETC-CIE 2009; 347-351https://doi.org/10.1115/DETC2009-87314

Abstract

View Articletitled, Adhesion Between Similar and Dissimilar Thin-Walled Micro-Structures

PDF

Topics: Adhesion , Boundary-value problems , Carbon , Casting , Modeling , Plate theory , Stiffness

Material Property Characterization of Costal Cartilage Using AFM Indentation

S. Tripathy, E. J. Berger

IDETC-CIE 2009; 353-362https://doi.org/10.1115/DETC2009-87462

Abstract

View Articletitled, Material Property Characterization of Costal Cartilage Using AFM Indentation

PDF

Topics: Atomic force microscopy , Cartilage , Materials properties , Bearings , Biological tissues , Elasticity , Junctions , Stress , Young's modulus

Mechanical and Piezoelectric Properties of PZT Nanofibers

Shiyou Xu, Yong Shi

IDETC-CIE 2009; 363-366https://doi.org/10.1115/DETC2009-87660

Abstract

View Articletitled, Mechanical and Piezoelectric Properties of PZT Nanofibers

PDF

Topics: Nanofibers , Nanosensors

Nano-Scale Impact Dynamics of Ultra-Thin Bonded Layers

Mircea Teodorescu, Stephanos Theodossiades, Homer Rahnejat

IDETC-CIE 2009; 367-373https://doi.org/10.1115/DETC2009-87667

Abstract

View Articletitled, Nano-Scale Impact Dynamics of Ultra-Thin Bonded Layers

PDF

Topics: Dynamics (Mechanics) , Nanoscale phenomena

Bio-MEMS / Bio-NEMS and Nanobiotechnology

A Novel Handhold High Power MEMS Atomizer Using Micro Cymbal Shape Nozzle Plate for Inhalation Therapy

Sheng Chih Shen, Yu-Jen Wang

IDETC-CIE 2009; 375-382https://doi.org/10.1115/DETC2009-86093

Abstract

View Articletitled, A Novel Handhold High Power MEMS Atomizer Using Micro Cymbal Shape Nozzle Plate for Inhalation Therapy

PDF

Topics: Microelectromechanical systems , Nozzles , Patient treatment , Shapes , Drops , Viscosity , Biomedicine , Energy consumption , Fluids , Medical devices

Adhesive Density of 11-Mercaptoundecanoic Acid (MUA) and Turnip Yellow Mosaic Virus (TYMV) in Microfluidic Channels

Chia-Che Wu, Ping-Kuo Tseng, Meng-Jhu Hou, Ching-Hsiu Tsai

IDETC-CIE 2009; 383-388https://doi.org/10.1115/DETC2009-86222

Abstract

View Articletitled, Adhesive Density of 11-Mercaptoundecanoic Acid (MUA) and Turnip Yellow Mosaic Virus (TYMV) in Microfluidic Channels

PDF

Topics: Adhesives , Density , Microfluidics , Adhesion , Flow (Dynamics) , Microorganisms , Nanoparticles , Reynolds number , Sensors , Brownian motion

Calculation of Isothermal Intrinsic Compressibility and Compression of GvpA Protein in Halobacterium sp. NRC-1 Using Molecular Modeling and Dynamics

Hussein M. EzzEldin, Santiago D. Solares

IDETC-CIE 2009; 389-395https://doi.org/10.1115/DETC2009-86265

Abstract

View Articletitled, Calculation of Isothermal Intrinsic Compressibility and Compression of GvpA Protein in Halobacterium sp. NRC-1 Using Molecular Modeling and Dynamics

PDF

Topics: Compressibility , Compression , Dynamics (Mechanics) , Modeling , Proteins , Pressure , Membranes , Simulation , Temperature , Buoyancy

Universal Behavior for Characteristic Curve of Immunomagnetic Reduction Assay With Aid of Biofunctionalized Magnetic Nanoparticles

Chin-Yih Hong, Shieh-Yueh Yang, Herng-Er Horng, Jen-Jie Chieh, Hong-Chang Yang

IDETC-CIE 2009; 397-400https://doi.org/10.1115/DETC2009-86436

Abstract

View Articletitled, Universal Behavior for Characteristic Curve of Immunomagnetic Reduction Assay With Aid of Biofunctionalized Magnetic Nanoparticles

PDF

Topics: Nanoparticles , Proteins , Magnetic fields , Magnetic susceptibility , Rotation

Optimization Based Geometric Modeling of Nano/Micro Scale Ion Milling of Organic Materials

Jing Fu, Sanjay B. Joshi

IDETC-CIE 2009; 401-408https://doi.org/10.1115/DETC2009-87134

Abstract

View Articletitled, Optimization Based Geometric Modeling of Nano/Micro Scale Ion Milling of Organic Materials

PDF

Topics: Focused ion beams , Geometric modeling , Milling , Optimization , Simulation , Geometry , Modeling , Biomaterials , Biomedicine , Computer simulation

A Lab-on-a-Chip Capillary Network for Red Blood Cell Diagnosis

Gou-Jen Wang, Guo-Yang Chen, Yan-Cheng Lin

IDETC-CIE 2009; 409-414https://doi.org/10.1115/DETC2009-87299

Abstract

View Articletitled, A Lab-on-a-Chip Capillary Network for Red Blood Cell Diagnosis

PDF

Topics: Erythrocytes , Blood , Blood flow , Carbon dioxide , Circuits , Diseases , Fluids , Hydrodynamics , Lithography , Modeling

Modeling DNA Motion Under Electrostatic Repulsion Within a Living Cell

Regis A. David, Brian D. Jensen

IDETC-CIE 2009; 415-421https://doi.org/10.1115/DETC2009-87413

Abstract

View Articletitled, Modeling DNA Motion Under Electrostatic Repulsion Within a Living Cell

PDF

Topics: Biological cells , DNA , Modeling , Cell membranes , Electric fields , Electromagnetic scattering , Life sciences , Micromachining , Particulate matter , Radiation scattering

Design of Micro/Nano Systems

Modelling, Sensitivity Analysis and Optimization of Mechanisms Made of Micro-Molded Components

Albert Albers, Pablo E. Leslabay

IDETC-CIE 2009; 423-432https://doi.org/10.1115/DETC2009-86147

Abstract

View Articletitled, Modelling, Sensitivity Analysis and Optimization of Mechanisms Made of Micro-Molded Components

PDF

Topics: Modeling , Optimization , Sensitivity analysis , Reliability , Robustness , Simulation , Accounting , Ceramics , Clearances (Engineering) , Computer simulation

Multi-Disciplinary Simulation of Piezoelectric Driven Microfluidic Inkjet

Jun Zeng, Charles G. Schmidt, Hui Liu, Adel Jilani

IDETC-CIE 2009; 433-436https://doi.org/10.1115/DETC2009-86686

Abstract

View Articletitled, Multi-Disciplinary Simulation of Piezoelectric Driven Microfluidic Inkjet

PDF

Topics: Microfluidics , Simulation , Design , Modeling , Manufacturing , Microelectromechanical systems , Simulation results

Design and Control of the 3 Axes Pneumatic Servo Micromanipulator for the Biological Technology

Ming-Chang Shih, Hung-Yi Chen

IDETC-CIE 2009; 437-443https://doi.org/10.1115/DETC2009-86763

Abstract

View Articletitled, Design and Control of the 3 Axes Pneumatic Servo Micromanipulator for the Biological Technology

PDF

Topics: Design , Servomechanisms , Air flow , Biomedicine , Compressibility , Control equipment , Cutting , Nonlinear systems , Pneumatic control , Pneumatic cylinders

Optimal Design of an Electrothermal Microfluidic Pump

E. Du, Souran Manoochehri

IDETC-CIE 2009; 445-452https://doi.org/10.1115/DETC2009-86879

Abstract

View Articletitled, Optimal Design of an Electrothermal Microfluidic Pump

PDF

Topics: Design , Microfluidics , Pumps , Flow (Dynamics) , Microchannels , Chemical etching , Electrodes , Electrokinetics , Optimization , Silicon

Design and Numerical Analysis of Magnetic Microrotors for Micromixing

Khashayar Khoshmanesh, Abbas Z. Kouzani, Saeid Nahavandi, Jagat R. Kanwar, Sara Baratchi

IDETC-CIE 2009; 453-457https://doi.org/10.1115/DETC2009-86905

Abstract

View Articletitled, Design and Numerical Analysis of Magnetic Microrotors for Micromixing

PDF

Topics: Design , Numerical analysis , Flow (Dynamics) , Rotors , Blades , Biomedicine , Corners (Structural elements) , Rotation , Simulation

Design Optimization of a Linear-Motion Large-Displacement Micro Mechanism for High Off-Axis Stiffness

David G. Smith, Gerrit T. Larsen, Larry L. Howell

IDETC-CIE 2009; 459-464https://doi.org/10.1115/DETC2009-87301

Abstract

View Articletitled, Design Optimization of a Linear-Motion Large-Displacement Micro Mechanism for High Off-Axis Stiffness

PDF

Topics: Design , Displacement , Optimization , Stiffness , Microelectromechanical systems , Compliant mechanisms

Towards the Design of a Decoupled, Two-Dimensional, Vision-Based µN Force Sensor for Microrobotics

David J. Cappelleri, Girish Krishnan, Charles Kim, Vijay Kumar, Sridhar Kota

IDETC-CIE 2009; 465-474https://doi.org/10.1115/DETC2009-87386

Abstract

View Articletitled, Towards the Design of a Decoupled, Two-Dimensional, Vision-Based µN Force Sensor for Microrobotics

PDF

Topics: Design , Force sensors , Stiffness , Blocks (Building materials) , Compliant mechanisms , Deflection , Deformation , Engineering prototypes , Microelectromechanical systems , Robotics

Direct Simulation Based Model-Predictive Control of Flow Maldistribution in Parallel Microchannels

Mathieu Martin, Chris Patton, John Schmitt, Sourabh V. Apte

IDETC-CIE 2009; 475-483https://doi.org/10.1115/DETC2009-87537

Abstract

View Articletitled, Direct Simulation Based Model-Predictive Control of Flow Maldistribution in Parallel Microchannels

PDF

Topics: Flow (Dynamics) , Microchannels , Simulation , Bubbles , Valves , Design , Dynamics (Mechanics) , Flow simulation , Fluid dynamics , Geometry

Biosensor Microassembly Platform: Design and Automation

Asanterabi Malima, Ahmed Busnaina, Sivasubramanian Somu

IDETC-CIE 2009; 485-489https://doi.org/10.1115/DETC2009-87618

Abstract

View Articletitled, Biosensor Microassembly Platform: Design and Automation

PDF

Topics: Biosensors , Design , Microassembling , Manufacturing , Nanoparticles , Biomedicine , Integrated circuits , Microscale devices , Microscopes , Motion control

Design and Development of a Chipscale Multifingered Micromanipulator System for Coordinated Microassembly

Sandeep Krishnan, Christopher Pelzmann, Laxman Saggere

IDETC-CIE 2009; 491-500https://doi.org/10.1115/DETC2009-87716

Abstract

View Articletitled, Design and Development of a Chipscale Multifingered Micromanipulator System for Coordinated Microassembly

PDF

Topics: Design , Microassembling , Manipulators , Microscale devices , Engineering prototypes , Manufacturing , Microfabrication , Micromanipulation , Optimization , Piezoelectric actuators

Design, Analysis, and Fabrication of Micro- and Nano-Actuators

Measurements of Piezoelectric Constant D₃₃ of Lead Zirconate Titanate (PZT) Through Use of a Mini Impact Hammer

Qing Guo, G. Z. Cao, I. Y. Shen

IDETC-CIE 2009; 501-505https://doi.org/10.1115/DETC2009-86157

Abstract

View Articletitled, Measurements of Piezoelectric Constant D33 of Lead Zirconate Titanate (PZT) Through Use of a Mini Impact Hammer

PDF

Topics: Hammers , Actuators , Boundary-value problems , Thin films , Circuits , Microactuators , Piezoelectric materials , Sensors , Signal to noise ratio , Stress

Correlation Improvement Between Theoretical and Experimental Results of PZT Thin-Film Membrane Actuators

Cheng-Chun Lee, G. Z. Cao, I. Y. Shen

IDETC-CIE 2009; 507-512https://doi.org/10.1115/DETC2009-86344

Abstract

View Articletitled, Correlation Improvement Between Theoretical and Experimental Results of PZT Thin-Film Membrane Actuators

PDF

Topics: Actuators , Membranes , Thin films , Finite element analysis , Dimensions , Displacement , Finite element model , Residual stresses , Lasers , Materials properties

Optimization of Piezoelectric Uniflex Microactuators

Hareesh K. R. Kommepalli, Christopher D. Rahn, Srinivas A. Tadigadapa

IDETC-CIE 2009; 513-520https://doi.org/10.1115/DETC2009-87594

Abstract

View Articletitled, Optimization of Piezoelectric Uniflex Microactuators

PDF

Topics: Microactuators , Optimization , Actuators , Displacement , Piezoelectric actuators , Switches

Modeling of Vertically Aligned Carbon Nanotube Composites for Vibration Damping

J. Y. Jia, W. H. Liao

IDETC-CIE 2009; 521-529https://doi.org/10.1115/DETC2009-87819

Abstract

View Articletitled, Modeling of Vertically Aligned Carbon Nanotube Composites for Vibration Damping

PDF

Topics: Carbon nanotubes , Composite materials , Damping , Modeling , Vibration , Stress , Epoxy adhesives , Epoxy resins , Resins , Density

Dynamics of MEMS and NEMS

On Nonlinear Response of Capacitive Sensors

Dumitru I. Caruntu, Martin Knecht

IDETC-CIE 2009; 531-538https://doi.org/10.1115/DETC2009-86144

Abstract

View Articletitled, On Nonlinear Response of Capacitive Sensors

PDF

Topics: Sensors , Casimir force , Microsensors , Approximation , Equations of motion , Hamilton's principle

Sensitivity Analysis of Atomic Force Microscope Cantilever Made of Functionally Graded Materials

M. Rahaeifard, M. H. Kahrobaiyan, M. T. Ahmadian

IDETC-CIE 2009; 539-544https://doi.org/10.1115/DETC2009-86254

Abstract

View Articletitled, Sensitivity Analysis of Atomic Force Microscope Cantilever Made of Functionally Graded Materials

PDF

Topics: Atomic force microscopy , Cantilevers , Functionally graded materials , Sensitivity analysis , Stiffness , Ceramics , Microcantilevers , Resonance , Euler-Bernoulli beam theory , Metals

A Fully Coupled FEM Model of Electromechanically Actuated MEMS With Squeeze Film Damping

Stephan D. A. Hannot, Daniel J. Rixen

IDETC-CIE 2009; 545-552https://doi.org/10.1115/DETC2009-86450

Abstract

View Articletitled, A Fully Coupled FEM Model of Electromechanically Actuated MEMS With Squeeze Film Damping

PDF

Topics: Damping , Finite element methods , Finite element model , Microelectromechanical systems , Switches , Fluids , Transients (Dynamics) , Vacuum

Period-Doubling Bifurcations in Atomic Force Microscopy

Andrew J. Dick, Wei Huang

IDETC-CIE 2009; 553-562https://doi.org/10.1115/DETC2009-86479

Abstract

View Articletitled, Period-Doubling Bifurcations in Atomic Force Microscopy

PDF

Topics: Atomic force microscopy , Bifurcation , Probes , Dynamic response , Excitation , Approximation , Cantilevers , Engineering simulation , Materials properties , Resonance

Simulation of Singly and Doubly Clamped Nanotube Based NEMS Devices

P. Chen, B. Peng, L. Ding, W. H. Xu, Y. Q. Wang, C. H. Ke

IDETC-CIE 2009; 563-567https://doi.org/10.1115/DETC2009-86518

Abstract

View Articletitled, Simulation of Singly and Doubly Clamped Nanotube Based NEMS Devices

PDF

Topics: Nanoelectromechanical devices , Nanotubes , Simulation , Deformation , Design , Kinematics , Computer simulation , Continuum mechanics , Modeling , Nanotube devices

On the Primary Resonance of an Electrostatically Actuated MEMS Using the Homotopy Perturbation Method

Mahdi Mojahedi, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian

IDETC-CIE 2009; 569-574https://doi.org/10.1115/DETC2009-86623

Abstract

View Articletitled, On the Primary Resonance of an Electrostatically Actuated MEMS Using the Homotopy Perturbation Method

PDF

Topics: Microelectromechanical systems , Resonance

Analytical and Experimental Frequency Response Analysis of Microcantilevers Subject to Tip-Sample Interaction

Aidin Delnavaz, S. Nima Mahmoodi, Nader Jalili, Hassan Zohoor

IDETC-CIE 2009; 575-581https://doi.org/10.1115/DETC2009-86889

Abstract

View Articletitled, Analytical and Experimental Frequency Response Analysis of Microcantilevers Subject to Tip-Sample Interaction

PDF

Topics: Actuators , Atomic force microscopy , Computer simulation , Frequency response , Microcantilevers , Particulate matter , Probes , Sensors , Simulation results , Theoretical analysis

An Experimental and Theoretical Investigation of Dynamic Pull-In in MEMS Devices Actuated Electrostatically

Fadi M. Alsaleem, Mohammad I. Younis

IDETC-CIE 2009; 583-595https://doi.org/10.1115/DETC2009-86909

Abstract

View Articletitled, An Experimental and Theoretical Investigation of Dynamic Pull-In in MEMS Devices Actuated Electrostatically

PDF

Topics: Microelectromechanical systems , Accelerometers , Resonance , Cantilevers , Damping , Dynamics (Mechanics) , Excitation , Microbeams , Nonlinear dynamics , Polysilicon

A Novel Semi-Analytical Approach for Micro Beams Subjected to Electrostatic Loads and Residual Stress Gradients

Kuang-Shun Ou, Kuo-Shen Chen, Tian-Shiang Yang, Sen-Yung Lee

IDETC-CIE 2009; 597-606https://doi.org/10.1115/DETC2009-86977

Abstract

View Articletitled, A Novel Semi-Analytical Approach for Micro Beams Subjected to Electrostatic Loads and Residual Stress Gradients

PDF

Topics: Microbeams , Stress

The Static and Dynamic Behavior of MEMS Arches Under Electrostatic Actuation

Hassen M. Ouakad, Mohammad I. Younis, Fadi M. Alsaleem, Ronald Miles, Weili Cui

IDETC-CIE 2009; 607-616https://doi.org/10.1115/DETC2009-87024

Abstract

View Articletitled, The Static and Dynamic Behavior of MEMS Arches Under Electrostatic Actuation

PDF

Topics: Arches , Microelectromechanical systems , Stress , Dynamic response , Microbeams , Micromachining , Polysilicon , Resonance , Vibration

Torsional Sensitivity of the First Four Modes of an AFM Cantilever With a Sidewall Probe Using Analytical Method

M. H. Kahrobaiyan, M. Rahaeifard, M. T. Ahmadian

IDETC-CIE 2009; 617-622https://doi.org/10.1115/DETC2009-87035

Abstract

View Articletitled, Torsional Sensitivity of the First Four Modes of an AFM Cantilever With a Sidewall Probe Using Analytical Method

PDF

Topics: Atomic force microscopy , Cantilevers , Probes , Stiffness , Resonance , Vibration

MEMS Bandpass Filters Based on Cyclic Coupling Architectures

Venkata Bharadwaj Chivukula, Jeffrey F. Rhoads

IDETC-CIE 2009; 623-634https://doi.org/10.1115/DETC2009-87059

Abstract

View Articletitled, MEMS Bandpass Filters Based on Cyclic Coupling Architectures

PDF

Topics: Architecture , Filters , Microelectromechanical systems , Chain , Q-factor , Energy consumption , Filtration , Integrated circuits , Micromechanical resonators , Resonance

Pull-In Dynamics of Electrostatically Actuated Bistable Micro Beam

Slava Krylov, Nir Dick

IDETC-CIE 2009; 635-645https://doi.org/10.1115/DETC2009-87236

Abstract

View Articletitled, Pull-In Dynamics of Electrostatically Actuated Bistable Micro Beam

PDF

Topics: Dynamics (Mechanics) , Microbeams , Deflection , Arches , Damping , Electric fields , Sensors , Simulation results , Switches , Transients (Dynamics)

Considerations for Use of Square-Paddle Resonators for Arrays of Micro- and Nanoscale Devices

John A. Judge, Teresa J. Woods, Joseph F. Vignola

IDETC-CIE 2009; 647-654https://doi.org/10.1115/DETC2009-87441

Abstract

View Articletitled, Considerations for Use of Square-Paddle Resonators for Arrays of Micro- and Nanoscale Devices

PDF

Topics: Design , Dimensions , Energy dissipation , Geometry , Microscale devices , Nanoscale devices , Nanoscale phenomena , Q-factor , Vacuum , Vibration

A Mass Sensing Technique for Electrostatically-Actuated MEMS

Mahmoud E. Khater, Eihab M. Abdel-Rahman, Ali H. Nayfeh

IDETC-CIE 2009; 655-661https://doi.org/10.1115/DETC2009-87551

Abstract

View Articletitled, A Mass Sensing Technique for Electrostatically-Actuated MEMS

PDF

Topics: Microelectromechanical systems , Bifurcation , Cantilever beams , Electrodes , Sensitivity analysis , Sensors

The Effect of Shape and Distribution of Perforations on Squeeze-Film Damping in Parallel Plate Capacitors

Weili Cui, Ronald N. Miles, Dorel Homentcovsci

IDETC-CIE 2009; 663-670https://doi.org/10.1115/DETC2009-87563

Abstract

View Articletitled, The Effect of Shape and Distribution of Perforations on Squeeze-Film Damping in Parallel Plate Capacitors

PDF

Topics: Capacitors , Damping , Shapes , Microelectromechanical systems , Sensors , Accelerometers , Design , Finite element methods , Fluids , Frequency response

Theoretical Modeling and Experimental Validation of Fluid-Loaded Micro Rectangular Plates

Zhangming Wu, Mike T. Wright, Xianghong Ma

IDETC-CIE 2009; 671-679https://doi.org/10.1115/DETC2009-87576

Abstract

View Articletitled, Theoretical Modeling and Experimental Validation of Fluid-Loaded Micro Rectangular Plates

PDF

Topics: Fluids , Modeling , Plates (structures) , Boundary-value problems , Design , Dynamic testing (Engineering) , Dynamic testing (Materials) , Engineering simulation , Excitation , Fluid structure interaction

Measurement and Control in Micro and Nanosystems

Simulations of Surface Defects Characterization Using Force Modulation Atomic Force Microscopy

Hossein Nejat Pishkenari, Ali Meghdari

IDETC-CIE 2009; 681-687https://doi.org/10.1115/DETC2009-86188

Abstract

View Articletitled, Simulations of Surface Defects Characterization Using Force Modulation Atomic Force Microscopy

PDF

Topics: Atomic force microscopy , Simulation , Cantilevers , Probes , Atoms , Excitation , Imaging , Molecular dynamics , Q-factor , Stiffness

An Automated Implementation of a Cantilever Calibration Technique for Heavy Fluid Loading Environments

Scott J. Kennedy, Daniel G. Cole, Robert L. Clark

IDETC-CIE 2009; 689-694https://doi.org/10.1115/DETC2009-86482

Abstract

View Articletitled, An Automated Implementation of a Cantilever Calibration Technique for Heavy Fluid Loading Environments

PDF

Topics: Calibration , Cantilevers , Fluids , Atomic force microscopy , Matlab

Evaluation of a Trapping Potential Measurement Technique for Optical Tweezers Using Simulations and Experiments

Arvind Balijepalli, Thomas W. LeBrun, Jason J. Gorman, Satyandra K. Gupta

IDETC-CIE 2009; 695-705https://doi.org/10.1115/DETC2009-86687

Abstract

View Articletitled, Evaluation of a Trapping Potential Measurement Technique for Optical Tweezers Using Simulations and Experiments

PDF

Topics: Engineering simulation , Simulation , Dimensions , Force measurement , Nanoparticles , Shapes , Diffusion (Physics) , Displacement , Dynamics (Mechanics) , Errors

Computational Development of Single- and Dual-Frequency Modulation Atomic Force Spectroscopy for Ambient Air Applications

Gaurav Chawla, Santiago D. Solares

IDETC-CIE 2009; 707-716https://doi.org/10.1115/DETC2009-86844

Abstract

View Articletitled, Computational Development of Single- and Dual-Frequency Modulation Atomic Force Spectroscopy for Ambient Air Applications

PDF

Topics: Fundamental forces (Physics) , Spectroscopy , Atomic force microscopy , Computer simulation , Mechanical behavior , Nanoscale phenomena

Stiffness and Mass Detection of Nano Layers Using Piezoresponse Force Microscopy

Saeid Bashash, Amin Salehi-Khojin, Nader Jalili, Gary Lee Thompson, Alexey Vertegel, Maren Mu¨ller, Rudieger Berger

IDETC-CIE 2009; 717-723https://doi.org/10.1115/DETC2009-86892

Abstract

View Articletitled, Stiffness and Mass Detection of Nano Layers Using Piezoresponse Force Microscopy

PDF

Topics: Microscopy , Stiffness , Resonance , Cantilevers , Microcantilevers , Atomic force microscopy , Excitation , Focused ion beams , Modal analysis , Sensors

Tele-Operated Microsystems Laboratory

Ganapathy Sivakumar, Matt Mulsow, Aaron Mellinger, Shelby Lacouture, Tim Dallas

IDETC-CIE 2009; 725-730https://doi.org/10.1115/DETC2009-86914

Abstract

View Articletitled, Tele-Operated Microsystems Laboratory

PDF

Topics: Microelectromechanical systems , Computers , Computer simulation , Construction , Degrees of freedom , Education , Haptics , Internet , Microscale devices , Testing

Minimizing Tip-Sample Contact Force in Automated Atomic Force Microscope Based Force Spectroscopy

Monica Rivera, Carleen Morris, David Carlson, Eric J. Toone, Daniel G. Cole, Robert L. Clark

IDETC-CIE 2009; 731-736https://doi.org/10.1115/DETC2009-87378

Abstract

View Articletitled, Minimizing Tip-Sample Contact Force in Automated Atomic Force Microscope Based Force Spectroscopy

PDF

Topics: Atomic force microscopy , Spectroscopy , Cycles , Force feedback , Feedback , Noise (Sound) , Sensors

Measuring Inter-Particle Forces at an Interface With Optical Tweezers and a Long Working-Distance Objective Lens

Daniel R. McAdams, Daniel G. Cole

IDETC-CIE 2009; 737-743https://doi.org/10.1115/DETC2009-87556

Abstract

View Articletitled, Measuring Inter-Particle Forces at an Interface With Optical Tweezers and a Long Working-Distance Objective Lens

PDF

Topics: Lenses (Optics) , Particulate matter , Dipoles (Electromagnetism) , Water , Coulomb's law , Emulsions , Fluid dynamics , Force measurement , Mineral oil , Rheology

MEMS/NEMS Photography - Contest

Multi-Layer Means of Guiding a Large Displacement Microelectromechanical System

David G. Smith, Larry L. Howell

IDETC-CIE 2009; 745https://doi.org/10.1115/DETC2009-87518

Abstract

View Articletitled, Multi-Layer Means of Guiding a Large Displacement Microelectromechanical System

PDF

Topics: Displacement , Microelectromechanical systems

Temple of Zeus: A Micro Replica

Aditya N. Das, Rakesh Murthy

IDETC-CIE 2009; 747https://doi.org/10.1115/DETC2009-87523

Abstract

View Articletitled, Temple of Zeus: A Micro Replica

PDF

Topics: Epoxy adhesives , Etching , Lenses (Optics) , Light sources , Microassembling , Microelectromechanical systems , Needles , Photolithography , Robots , Sapphire

Articulated Four Axis Microrobot

Rakesh Murthy, Aditya N. Das

IDETC-CIE 2009; 749-750https://doi.org/10.1115/DETC2009-87544

Abstract

View Articletitled, Articulated Four Axis Microrobot

PDF

Topics: Actuators , Atomic force microscopy , Bending (Stress) , Cables , Degrees of freedom , End effectors , Microassembling , Microelectromechanical systems , Probes , Reactive-ion etching

MEMS Nanoinjector for Injecting Foreign DNA Into Living Cells

Quentin Aten

IDETC-CIE 2009; 751https://doi.org/10.1115/DETC2009-87581

Abstract

View Articletitled, MEMS Nanoinjector for Injecting Foreign DNA Into Living Cells

PDF

Topics: Biological cells , DNA , Microelectromechanical systems , Polysilicon , Electron microscopes , Electron microscopy , Grasping , Latex

Facets and Fissures of a Fractured SOI Wafer

Quentin Aten

IDETC-CIE 2009; 753https://doi.org/10.1115/DETC2009-87584

Abstract

View Articletitled, Facets and Fissures of a Fractured SOI Wafer

PDF

Topics: Semiconductor wafers , Silicon-on-insulator , Silicon , Electron microscopy , Etching

Symmetry in a Bistable MEMS Device With Force Gage and Comb Drive

Shannon Zirbel

IDETC-CIE 2009; 755https://doi.org/10.1115/DETC2009-87606

Abstract

View Articletitled, Symmetry in a Bistable MEMS Device With Force Gage and Comb Drive

PDF

Topics: Gages , Microelectromechanical systems

Off-Center Force Gage on a Tristable MEMS Device

Shannon Zirbel

IDETC-CIE 2009; 757https://doi.org/10.1115/DETC2009-87622

Abstract

View Articletitled, Off-Center Force Gage on a Tristable MEMS Device

PDF

Topics: Gages , Microelectromechanical systems

Micro/Nano-Robotics

Lateral Thin-Film Piezoelectric Actuators for Bio-Inspired Micro-Robotic Locomotion

Kenn Oldham, Choong-Ho Rhee, Jyoung-Hoon Ryou, Ronald Polcawich, Jeffrey Pulskamp

IDETC-CIE 2009; 759-768https://doi.org/10.1115/DETC2009-86427

Abstract

View Articletitled, Lateral Thin-Film Piezoelectric Actuators for Bio-Inspired Micro-Robotic Locomotion

PDF

Topics: Biomimetics , Piezoelectric actuators , Robotics , Thin films , Actuators , Robots , Silicon , Design , Displacement , Engineering simulation

Precise Motion Control of a Piezoelectric Microgripper for Microspectrometer Assembly

Kanty Rabenorosoa, Ce´dric Cle´vy, Philippe Lutz, Aditya N. Das, Rakesh Murthy, Dan Popa

IDETC-CIE 2009; 769-776https://doi.org/10.1115/DETC2009-86463

Abstract

View Articletitled, Precise Motion Control of a Piezoelectric Microgripper for Microspectrometer Assembly

PDF

Topics: Algorithms , Control modeling , Degrees of freedom , Fourier transform infrared spectroscopy , Fourier transforms , Glass , Instrumentation , Manufacturing , Materials science , Microassembling

Articulated MEMS Robot for Microfactory Applications

Rakesh Murthy, Dan O. Popa

IDETC-CIE 2009; 777-783https://doi.org/10.1115/DETC2009-86888

Abstract

View Articletitled, Articulated MEMS Robot for Microfactory Applications

PDF

Topics: Microelectromechanical systems , Robots , Design , Kinematics , Microassembling , Wire , Yaw , Actuators , Atomic force microscopy , Bending (Stress)

A Decoupled and Prioritized Stochastic Dynamic Programming Approach for Automated Transport of Multiple Particles Using Optical Tweezers

Ashis Gopal Banerjee, Wolfgang Losert, Satyandra K. Gupta

IDETC-CIE 2009; 785-796https://doi.org/10.1115/DETC2009-87113

Abstract

View Articletitled, A Decoupled and Prioritized Stochastic Dynamic Programming Approach for Automated Transport of Multiple Particles Using Optical Tweezers

PDF

Topics: Dynamic programming , Particulate matter , Algorithms , Collisions (Physics) , Path planning , Optimization , Performance characterization , Simulation results

Highly Integrated PiezoMEMS Enabled Millimeter-Scale Robotics

Jeffrey S. Pulskamp, Ronald G. Polcawich, Kenn Oldham

IDETC-CIE 2009; 797-805https://doi.org/10.1115/DETC2009-87231

Abstract

View Articletitled, Highly Integrated PiezoMEMS Enabled Millimeter-Scale Robotics

PDF

Topics: Robotics , Microelectromechanical systems , Adhesives , Army , Energy harvesting , Flight , Thin films

Basic Characterization of a Linear Elastomer Actuator

Claudia Pagano, Matteo Malosio, Irene Fassi

IDETC-CIE 2009; 807-812https://doi.org/10.1115/DETC2009-87285

Abstract

View Articletitled, Basic Characterization of a Linear Elastomer Actuator

PDF

Topics: Actuators , Elastomers , Electric fields , Microelectromechanical systems , Biomedicine , Capacitors , Conducting polymers , Deformation , Dimensions , Electromechanical effects

11th International Conference on Advanced Vehicle and Tire Technologies

Advances in Methods for Vehicle Systems Design and Control

Off-Road Tire-Soil Modeling Using Finite Element Analysis Technique

Jeff Slade, Moustafa El-Gindy, Ryan Lescoe, Fredrik O¨ijer, Mukesh Trivedi, Inge Johansson

IDETC-CIE 2009; 815-829https://doi.org/10.1115/DETC2009-86003

Abstract

View Articletitled, Off-Road Tire-Soil Modeling Using Finite Element Analysis Technique

PDF

Topics: Finite element analysis , Modeling , Roads , Soil , Tires , Trucks

Pattern Design of Non-Pneumatic Tire for Stiffness Using Topology Optimization

Byung Man Kwak, Eui Jong Yoo, Young Hwa Sung, In Gwun Jang

IDETC-CIE 2009; 831-836https://doi.org/10.1115/DETC2009-86068

Abstract

View Articletitled, Pattern Design of Non-Pneumatic Tire for Stiffness Using Topology Optimization

PDF

Topics: Design , Optimization , Stiffness , Tires , Topology

A Computer Aided Engineering Approach for the Optimal Design of an Active Suspension System

Marco Gubitosa, Jan Anthonis, Nicolas Albarello, Wim Desmet

IDETC-CIE 2009; 837-847https://doi.org/10.1115/DETC2009-86325

Abstract

View Articletitled, A Computer Aided Engineering Approach for the Optimal Design of an Active Suspension System

PDF

Topics: Computer-aided engineering , Design , Modeling , Optimization , Suspension systems

Rack and Pinion Steering Linkage Synthesis Using an Adapted Freudenstein Approach

Robert C. Leishman, Kenneth W. Chase

IDETC-CIE 2009; 849-856https://doi.org/10.1115/DETC2009-86350

Abstract

View Articletitled, Rack and Pinion Steering Linkage Synthesis Using an Adapted Freudenstein Approach

PDF

Topics: Automotive industry , Design , Linkages , Optimization , Safety , Stability , Steering systems , Tires , Wear

Ceramic Composite Diesel Filter Trap

Nishikant V. Deshpande, Suhas C. Kongre, Piyush N. Deshpande, Mahul Indani, Rajan Singh

IDETC-CIE 2009; 857-861https://doi.org/10.1115/DETC2009-86568

Abstract

View Articletitled, Ceramic Composite Diesel Filter Trap

PDF

Topics: Ceramic composites , Diesel , Filters , Particulate matter , Pressure , Diesel engines , Porosity , Ceramic filters , Emissions , Air pollution control

Concept and Components for Disturbance Decoupling and Energy Harvesting

Kai-Uwe Dettmann, Matthias Marx, Keiwan Kashi, Dirk Nissing, Dirk So¨ffker

IDETC-CIE 2009; 863-868https://doi.org/10.1115/DETC2009-86801

Abstract

View Articletitled, Concept and Components for Disturbance Decoupling and Energy Harvesting

PDF

Topics: Energy harvesting , Springs , Torque , Torsion , Hydraulic cylinders , Displacement , Electromechanical actuators , Force sensors , Mechanical structures , Modeling

Motorcycle Dynamic Models for Virtual Rider Design and Cornering Analysis

David Moreno Giner, Michal Manka

IDETC-CIE 2009; 869-878https://doi.org/10.1115/DETC2009-86823

Abstract

View Articletitled, Motorcycle Dynamic Models for Virtual Rider Design and Cornering Analysis

PDF

Topics: Design , Dynamic models , Motorcycles , Dynamics (Mechanics) , Tires , Degrees of freedom , Wheels , Bicycles , Computer software , Geometry

Opportunities in Automotive Winter Testing

Mikael Nybacka

IDETC-CIE 2009; 879-886https://doi.org/10.1115/DETC2009-87264

Abstract

View Articletitled, Opportunities in Automotive Winter Testing

PDF

Topics: Testing , Robots , Automotive industry , Safety , Chain , Data collection , Engineering prototypes , Entrepreneurs , Vehicles , Workshops (Work spaces)

Advances in Multibody Systems Modeling and Validation for Vehicle Dynamics Applications

Liftable Auxiliary Axle for a Multi Axle Vehicle: A Review

A. Sahaya Grinspon

IDETC-CIE 2009; 887-892https://doi.org/10.1115/DETC2009-86085

Abstract

View Articletitled, Liftable Auxiliary Axle for a Multi Axle Vehicle: A Review

PDF

Topics: Vehicles , Bellows (Equipment) , Pavement , Tires , Compressed air , Load bearing capacity , Pressure , Suspension systems

Comparison Between a Polynomial-Chaos-Based Bayesian Approach and a Polynomial-Chaos-Based EKF Approach for Parameter Estimation With Application to Vehicle Dynamics

Emmanuel Blanchard, Corina Sandu, Adrian Sandu

IDETC-CIE 2009; 893-904https://doi.org/10.1115/DETC2009-86402

Abstract

View Articletitled, Comparison Between a Polynomial-Chaos-Based Bayesian Approach and a Polynomial-Chaos-Based EKF Approach for Parameter Estimation With Application to Vehicle Dynamics

PDF

Topics: Chaos , Kalman filters , Parameter estimation , Polynomials , Vehicle dynamics

An Empirical Approach to Modeling the Friction Coefficient for Wheel-Rail Contact

HyunWook Lee, Corina Sandu, Carvel Holton, Mehdi Ahmadian

IDETC-CIE 2009; 905-912https://doi.org/10.1115/DETC2009-86429

Abstract

View Articletitled, An Empirical Approach to Modeling the Friction Coefficient for Wheel-Rail Contact

PDF

Topics: Friction , Modeling , Rails , Wheels

Application Based Guidelines for Terrain Profile Resolution Requirements

Steve Southward, Shawn Schneider, Gordon Kwong, Sajit Jumani, Holley Conner

IDETC-CIE 2009; 913-919https://doi.org/10.1115/DETC2009-87267

Abstract

View Articletitled, Application Based Guidelines for Terrain Profile Resolution Requirements

PDF

Topics: Resolution (Optics) , Automotive design , Computer simulation , Design , Testing , Vehicles

Modeling and Analysis of Flexible-Wheel Suspension Concept

Dongpu Cao, Amir Khajepour, Xubin Song

IDETC-CIE 2009; 921-929https://doi.org/10.1115/DETC2009-87404

Abstract

View Articletitled, Modeling and Analysis of Flexible-Wheel Suspension Concept

PDF

Topics: Modeling , Wheels , Damping , Design , Roads , Stiffness , Vehicles , Fuel efficiency , Safety , Suspension systems

Advances in Non-Conventional, Energy Efficient and Environmentally Friendly Vehicles

Fuel Efficiency Strategic Plan of Medium-Duty Tactical Truck

Allen M. Quail, Jr., Y. Gene Liao, Rodrigo Gonzalez, Molly O’Malley, Tai H. Duong, Paul F. Skalny

IDETC-CIE 2009; 931-941https://doi.org/10.1115/DETC2009-86101

Abstract

View Articletitled, Fuel Efficiency Strategic Plan of Medium-Duty Tactical Truck

PDF

Topics: Fuel efficiency , Strategic planning , Trucks , Engines , Cooling , Fuel consumption , Governments , Hydrogen

Scheme Design and Optimal Selection for HEV Planetary Gear Coupling Mechanism

Futang Zhu, Li Chen, Chengliang Yin

IDETC-CIE 2009; 943-949https://doi.org/10.1115/DETC2009-86716

Abstract

View Articletitled, Scheme Design and Optimal Selection for HEV Planetary Gear Coupling Mechanism

PDF

Topics: Design , Planetary gears , Hybrid electric vehicles , Creativity , Load bearing capacity

Optimization of Twin Tensioner Performance in a Belt-Driven Integrated Starter-Generator System for Micro-Hybrids

Adebukola Olatunde, J. W. Zu

IDETC-CIE 2009; 951-957https://doi.org/10.1115/DETC2009-87110

Abstract

View Articletitled, Optimization of Twin Tensioner Performance in a Belt-Driven Integrated Starter-Generator System for Micro-Hybrids

PDF

Topics: Belts , Generators , Optimization

Effect of Geared Transmissions on Electric Vehicle Drivetrains

Qinglian Ren, David A. Crolla, Adrian Morris

IDETC-CIE 2009; 959-966https://doi.org/10.1115/DETC2009-87190

Abstract

View Articletitled, Effect of Geared Transmissions on Electric Vehicle Drivetrains

PDF

Topics: Electric vehicles , Cycles , Mechanical drives , Energy consumption , Engines , Modeling , Motors

Closed Loop Estimator-Controller Synthesis for a Two-Zone Controlled Auto-Ignition Engine Model

Varun Tandra, Nilabh Srivastava

IDETC-CIE 2009; 967-975https://doi.org/10.1115/DETC2009-87596

Abstract

View Articletitled, Closed Loop Estimator-Controller Synthesis for a Two-Zone Controlled Auto-Ignition Engine Model

PDF

Topics: Control equipment , Engines , Ignition , Combustion , Homogeneous charge compression ignition engines , Temperature , Cylinders , Exhaust systems , Physics , Pressure

Advances in Vehicle Design Tools to Enhance Safety, Health, and Ergonomics

Design Parameter Investigation in Customer-Oriented Drive Train Development Using Human Sensation Modeling Tools

Albert Albers, Sarawut Lerspalungsanti, Tobias Du¨ser, Sascha Ott

IDETC-CIE 2009; 977-985https://doi.org/10.1115/DETC2009-86363

Abstract

View Articletitled, Design Parameter Investigation in Customer-Oriented Drive Train Development Using Human Sensation Modeling Tools

PDF

Topics: Design , Modeling , Trains , Engineering prototypes , Vehicles , Artificial neural networks , Damping , Friction , Simulation , Automotive engineering

Design Approach of Gear Teeth Number for Vehicle Transmission Considering Human Aural Characteristics

Takayuki Araragi, Masaki Nagata, Yasuhiro Uenishi, Toshiki Hirogaki, Eiichi Aoyama, Masaya Miyazawa

IDETC-CIE 2009; 987-995https://doi.org/10.1115/DETC2009-86628

Abstract

View Articletitled, Design Approach of Gear Teeth Number for Vehicle Transmission Considering Human Aural Characteristics

PDF

Topics: Automotive transmissions , Design , Gear teeth , Gears , Noise (Sound) , Vehicles , Design methodology , Acoustics , Errors

Co-Simulations of Motorcycle-Rider System in Road Behaviour Simulations

Michal Manka, David Moreno Giner, Jian Kang

IDETC-CIE 2009; 997-1002https://doi.org/10.1115/DETC2009-86929

Abstract

View Articletitled, Co-Simulations of Motorcycle-Rider System in Road Behaviour Simulations

PDF

Topics: Engineering simulation , Motorcycles , Roads , Simulation , Control equipment , Safety , Kinematics , Simulation results , Wounds

Inertial Sensing of Dummy Kinematics

Sangram Redkar, Tom Sugar, Bill Dillard, Karthik Narayanan

IDETC-CIE 2009; 1003-1009https://doi.org/10.1115/DETC2009-87051

Abstract

View Articletitled, Inertial Sensing of Dummy Kinematics

PDF

Topics: Kinematics , Algorithms , Accelerometers , Automotive design , Biomechanics , Computer software , Errors , Fuzzy logic , Hardware , Injury mechanisms

Comparative Analysis of Two Numerical Methods of Rollover Simulation of a Semitrailer for Hydrogen Transport

David Valladares, Luis Castejo´n, Marco Carrera, Ramo´n Miralbe´s, Hugo Malo´n, Carlos Marti´n

IDETC-CIE 2009; 1011-1019https://doi.org/10.1115/DETC2009-87379

Abstract

View Articletitled, Comparative Analysis of Two Numerical Methods of Rollover Simulation of a Semitrailer for Hydrogen Transport

PDF

Topics: Hydrogen , Numerical analysis , Simulation , Vehicles , Computer simulation , Optimization , Computers , Decision making , Design , Finite element methods

Advances in Vehicle Systems Dynamics and Control

Vibration Control of a Seat Suspension System Using Magnetorheological Damper

H. Metered, P. Bonello, S. O. Oyadiji

IDETC-CIE 2009; 1021-1029https://doi.org/10.1115/DETC2009-86081

Abstract

View Articletitled, Vibration Control of a Seat Suspension System Using Magnetorheological Damper

PDF

Topics: Dampers , Suspension systems , Vibration control , Control equipment , Control systems , Damping , Algorithms , Degrees of freedom , Roads , Sliding mode control

Integrated Control and Coordination of Vehicle System Dynamics

Hansong Xiao, Wuwei Chen, Changbao Chu, Jean W. Zu

IDETC-CIE 2009; 1031-1037https://doi.org/10.1115/DETC2009-86096

Abstract

View Articletitled, Integrated Control and Coordination of Vehicle System Dynamics

PDF

Topics: System dynamics , Vehicles , Control systems , Control equipment , Stability , Antilock braking systems , Braking , Electricity (Physics) , Motor vehicles , Simulation results

Modified Sky-Hook Control of a Semi-Active Suspension System Using H_∞ Robust Control Theory

Mohammad Saber Fallah, Rama Bhat, Wen-Fang Xie

IDETC-CIE 2009; 1039-1045https://doi.org/10.1115/DETC2009-86506

Abstract

View Articletitled, Modified Sky-Hook Control of a Semi-Active Suspension System Using H∞ Robust Control Theory

PDF

Topics: Robust control , Suspension systems , Vehicles , Stability , Design , Kinematics , Control equipment , Feedback , Dynamic models , Genetic algorithms

Design of Semiactive Vehicle Suspension Controls in Frequency Domain

Xubin Song, Dongpu Cao

IDETC-CIE 2009; 1047-1052https://doi.org/10.1115/DETC2009-86557

Abstract

View Articletitled, Design of Semiactive Vehicle Suspension Controls in Frequency Domain

PDF

Topics: Design , Suspension systems , Patents , Algorithms , Control algorithms , Damping , Dynamic systems , Dynamics (Mechanics) , Simulation , Tradeoffs

Different Optimization Criteria for Vehicle Seat Suspension Control: Position Versus Acceleration

Saeed Hashemnia, Mohammad T. Ahmadian

IDETC-CIE 2009; 1053-1059https://doi.org/10.1115/DETC2009-86732

Abstract

View Articletitled, Different Optimization Criteria for Vehicle Seat Suspension Control: Position Versus Acceleration

PDF

Topics: Optimization , Vehicles , Control equipment , Vibration , Displacement , Fuzzy logic , Brakes , Degrees of freedom , Genetic algorithms , Simulation

Design of a Fuzzy Controller for Independent Control of Front Wheels Steering Angles

Avesta Goodarzi, Davood Rahiminejad, Ebrahim Esmailzadeh

IDETC-CIE 2009; 1061-1067https://doi.org/10.1115/DETC2009-87748

Abstract

View Articletitled, Design of a Fuzzy Controller for Independent Control of Front Wheels Steering Angles

PDF

Topics: Control equipment , Design , Wheels , Vehicles , Control systems , Computer simulation , Dynamic models , Errors , Fuzzy logic , Optimal control

All Years

Proceedings Papers

ASME Power Transmission and Gearing Conference

Gear Design and Analysis

Gear Dynamics and Noise

Gear Manufacturing and Tribology

Gear Strength and Durability

Transmissions

3rd International Conference on Micro- and Nanosystems

Applied Mechanics, Contact Mechanics and Tribology at Micro- and Nano-Scales

Bio-MEMS / Bio-NEMS and Nanobiotechnology

Design of Micro/Nano Systems

Design, Analysis, and Fabrication of Micro- and Nano-Actuators

Dynamics of MEMS and NEMS

Measurement and Control in Micro and Nanosystems

MEMS/NEMS Photography - Contest

Micro/Nano-Robotics

11th International Conference on Advanced Vehicle and Tire Technologies

Advances in Methods for Vehicle Systems Design and Control

Advances in Multibody Systems Modeling and Validation for Vehicle Dynamics Applications

Advances in Non-Conventional, Energy Efficient and Environmentally Friendly Vehicles

Advances in Vehicle Design Tools to Enhance Safety, Health, and Ergonomics

Advances in Vehicle Systems Dynamics and Control