Skip Nav Destination
Proceedings Papers
In This Volume
Volume 1: 22nd Biennial Conference on Mechanical Vibration and Noise, Parts A and B
22nd Biennial Conference on Mechanical Vibration and Noise
Condition Monitoring and Diagnosis
Fault Diagnosis of Rotating Machinery Due to Clearance Using Hilbert-Huang Transform
IDETC-CIE 2009; 13-20https://doi.org/10.1115/DETC2009-86332
Topics:
Clearances (Engineering)
,
Fault diagnosis
,
Machinery
,
Signals
,
Friction
,
Rotors
,
Signal processing
,
Stators
,
Time-frequency analysis
,
Vibration
The Revelation of Propagating Ultrasonic Guided Waves Through Simulation When They Encountered Defects in a Pipe
IDETC-CIE 2009; 21-28https://doi.org/10.1115/DETC2009-86380
Topics:
Guided wave ultrasonic testing
,
Pipes
,
Simulation
,
Inspection
,
Pipelines
,
Waves
,
Finite element methods
,
Roads
,
Water
,
Emissions
Parameter Identification of a Cantilever Beam Immersed in Viscous Fluids With Potential Applications to the Probe Calibration of Atomic Force Microscopes
IDETC-CIE 2009; 37-44https://doi.org/10.1115/DETC2009-86415
Topics:
Atomic force microscopy
,
Calibration
,
Cantilever beams
,
Fluids
,
Probes
,
Elastic constants
,
Excitation
,
Algorithms
,
Cantilevers
,
Computer simulation
Automatic Condition Monitoring and Early Fault Detection of Gearbox
IDETC-CIE 2009; 45-50https://doi.org/10.1115/DETC2009-86469
Topics:
Condition monitoring
,
Flaw detection
,
Mechanical drives
,
Gears
,
Failure
,
Machinery
,
Maintenance
,
Signals
,
Decision making
,
Wavelets
An Efficient Diagnosis Technique for Variations of Shaft-Bow and Unbalance
IDETC-CIE 2009; 57-66https://doi.org/10.1115/DETC2009-86711
Topics:
Machinery
,
Power stations
,
Rotors
,
Steam
,
Turbogenerators
,
Vibration
Analysis of Acoustic Wave Due to Gas Leakage in Buried Gas Pipe
IDETC-CIE 2009; 67-71https://doi.org/10.1115/DETC2009-86743
Topics:
Acoustics
,
Leakage
,
Pipes
,
Waves
,
Signals
,
Steel
,
Boundary element methods
,
Wave propagation
,
Filters
,
Fluids
Rotating Machinery Fault Detection Using EEMD and Bispectrum
IDETC-CIE 2009; 81-86https://doi.org/10.1115/DETC2009-86794
Topics:
Flaw detection
,
Machinery
,
Signals
,
Vibration
,
Algorithms
,
Gears
,
Mechanical drives
,
Simulation
Engineering System Fault Detection Using Particle Filters
IDETC-CIE 2009; 95-101https://doi.org/10.1115/DETC2009-86809
Topics:
Engineering systems and industry applications
,
Filters
,
Flaw detection
,
Particulate matter
,
Machinery
,
Signals
,
Vibration
,
Entropy
,
Failure
,
Mechanical drives
Torsional Vibration Analysis and Stress Calculation for the Fault 600MW Steam Turbine Generator Shaft System
IDETC-CIE 2009; 103-109https://doi.org/10.1115/DETC2009-86854
Topics:
Generators
,
Steam turbines
,
Stress
,
Vibration analysis
,
Oscillations
,
Rotors
,
Vibration
,
Accidents
,
Dynamic models
,
Finite element methods
Bearing Fault Diagnosis Based on Embedded Multiple Sensors
IDETC-CIE 2009; 111-115https://doi.org/10.1115/DETC2009-86856
Topics:
Bearings
,
Fault diagnosis
,
Sensors
,
Signals
,
Flaw detection
,
Temperature
,
Vibration
Condition Monitoring and Diagnostics in Heavy-Duty Wheels: A First Experimental Approach
IDETC-CIE 2009; 117-125https://doi.org/10.1115/DETC2009-87333
Topics:
Condition monitoring
,
Wheels
,
Acoustics
,
Assembly lines
,
Flaw detection
,
Manufacturing
,
Noise (Sound)
,
Sensors
,
Signals
,
Time-frequency analysis
Modal Sensitivities, Spatial Signal Distribution and Average of Segmented Ring Sensors
IDETC-CIE 2009; 135-144https://doi.org/10.1115/DETC2009-87411
Topics:
Sensors
,
Signals
,
Shells
,
Membranes
,
Image segmentation
,
Vibration control
Integrated Cut Performance and Sample Inspection System for Microtome Setup Evaluation
IDETC-CIE 2009; 145-152https://doi.org/10.1115/DETC2009-87521
Topics:
Blades
,
Compression
,
Cutting
,
Imaging
,
Inspection
,
Quality control
,
Reliability
,
Testing
,
User interfaces
,
Vibration
Induction Motor Multi-Fault Analysis Based on Intrinsic Mode Functions in Hilbert-Huang Transform
IDETC-CIE 2009; 159-164https://doi.org/10.1115/DETC2009-87833
Topics:
Electromagnetic induction
,
Engines
,
Motors
,
Sensors
,
Vibration
,
Bearings
,
Damage
,
Fast Fourier transforms
,
Microphones
,
Rotors
Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
Shape Optimization of Multi-Chamber Mufflers With Plug-Inlet Tube on a Venting Process by Genetic Algorithms
IDETC-CIE 2009; 165-174https://doi.org/10.1115/DETC2009-86092
Topics:
Genetic algorithms
,
Shape optimization
,
Silencers
,
Noise (Sound)
,
Pressure drop
,
Acoustics
,
Liabilities
,
Optimization
,
Pressure
,
Sound
A Coupled Theoretical-Experimental Dynamical Model for Chatter Prediction in Milling Processes
IDETC-CIE 2009; 175-184https://doi.org/10.1115/DETC2009-86216
Topics:
Chatter
,
Milling
,
Stability
,
Delay differential equations
,
Cutting
,
Milling machines
,
Eigenfunctions
,
Lumped parameter models
,
Machinery
,
Machining
An Analytical Model for Force Estimation on Arms of Concrete Mixers
IDETC-CIE 2009; 195-204https://doi.org/10.1115/DETC2009-86621
Topics:
Cements (Adhesives)
,
Concrete mixers
,
Concretes
,
Electricity (Physics)
,
Machinery
,
Sands
,
Shapes
,
Water
PB-Spline Hybrid Surface Fitting Technique
IDETC-CIE 2009; 205-211https://doi.org/10.1115/DETC2009-87195
Topics:
Splines
,
Surface fitting
,
B-splines
,
Fittings
,
Resolution (Optics)
,
Tensors
PB-Spline Finite Element Shell Modeling and Refinement Technique
IDETC-CIE 2009; 213-221https://doi.org/10.1115/DETC2009-87232
Topics:
Finite element analysis
,
Modeling
,
Shells
,
Splines
,
B-splines
,
Finite element model
,
Shapes
Dynamics and Control of Bio-Systems
Intrinsic Mode Decomposition of Physiological Signals for Feature Extraction
IDETC-CIE 2009; 233-239https://doi.org/10.1115/DETC2009-86806
Topics:
Biomedicine
,
Entropy
,
Feature extraction
,
Physiology
,
Signal processing
,
Signals
,
Shapes
A Matlab/Simulink Model of the Inner Ear Angular Accelerometers Sensors
IDETC-CIE 2009; 241-246https://doi.org/10.1115/DETC2009-87166
Topics:
Accelerometers
,
Ear
,
Matlab
,
Sensors
,
Canals
,
Biomedicine
,
Biosensors
,
Kinematics
,
Testing
Complex Modal Decomposition Applied to Nematode Posturing
IDETC-CIE 2009; 247-254https://doi.org/10.1115/DETC2009-87800
Topics:
Fast Fourier transforms
,
Noise (Sound)
,
Wavelength
,
Whirls
Dynamics of Band-Gap Materials and Structures
Wave Propagation in Two-Dimensional Nonlinear Periodic Lattices
IDETC-CIE 2009; 255-262https://doi.org/10.1115/DETC2009-86279
Topics:
Wave propagation
,
Excitation
,
Hazardous substances
,
Periodic structures
,
Stiffness
,
Electromagnetic spectrum
,
Simulation
,
Waves
Nonlinear Periodic Systems: Bands and Localization
IDETC-CIE 2009; 263-270https://doi.org/10.1115/DETC2009-87315
Topics:
Chaos
,
Dynamics (Mechanics)
,
Nonlinear systems
,
Resonance
,
Standing waves
,
Traveling waves
An Experimental Investigation of Acoustic Band Gaps and Localization in Granular Elastic Chains
IDETC-CIE 2009; 271-276https://doi.org/10.1115/DETC2009-87427
Topics:
Acoustics
,
Chain
,
Energy gap
,
Excitation
,
Signals
,
Actuators
,
Aluminum
,
Computer simulation
,
Construction
,
Engineering systems and industry applications
Vibration Isolation via Linear and Nonlinear Periodic Devices
IDETC-CIE 2009; 277-284https://doi.org/10.1115/DETC2009-87620
Topics:
Chain
,
Design
,
Energy dissipation
,
Filters
,
Stiffness
,
Vibration
,
Vibration isolation
,
Waves
Dynamics of Mechanical Systems With Contact and Friction
Control Concepts of Semi-Active Friction Dampers
IDETC-CIE 2009; 291-298https://doi.org/10.1115/DETC2009-86166
Topics:
Dampers
,
Friction
,
Actuators
,
Control algorithms
,
Vibration
,
Closed loop systems
,
Design
,
Displacement
,
Durability
,
Emissions
Effects of Rolling Friction on Ball Positioning for an Automatic Ball Balancer
IDETC-CIE 2009; 299-306https://doi.org/10.1115/DETC2009-86379
Topics:
Rolling friction
,
Vibration
Stick-Slip Dynamics in Ultrasonic Consolidation
IDETC-CIE 2009; 307-317https://doi.org/10.1115/DETC2009-86527
Topics:
Adaptive structures
,
Armor
,
Bonding
,
Composite materials
,
Computer simulation
,
Deformation
,
Design
,
Dimensions
,
Dynamics (Mechanics)
,
Fibers
Design of Limit-Switch Sensors Based on Discontinuity-Induced Nonlinearities
IDETC-CIE 2009; 319-328https://doi.org/10.1115/DETC2009-86560
Topics:
Design
,
Sensors
,
Switches
,
Circuits
,
Steady state
,
Transients (Dynamics)
,
Bifurcation
,
Dynamics (Mechanics)
,
Pressure
,
Temperature
Dynamics of a Cleaning Blade Based on a 2DOF Link Model
IDETC-CIE 2009; 329-338https://doi.org/10.1115/DETC2009-86821
Topics:
Blades
,
Dynamics (Mechanics)
,
Vibration
,
Bifurcation
,
Equilibrium (Physics)
,
Friction
,
Lasers
,
Shapes
,
Stability
Damping Performance of a Particle Damper in Two Dimensions
IDETC-CIE 2009; 339-347https://doi.org/10.1115/DETC2009-86862
Topics:
Dampers
,
Damping
,
Dimensions
,
Particulate matter
,
Cavities
,
Energy dissipation
,
Friction
,
Vibration
,
Transients (Dynamics)
Vibration Damping in Bolted Friction Beam-Columns
IDETC-CIE 2009; 365-372https://doi.org/10.1115/DETC2009-87184
Topics:
Damping
,
Friction
,
Vibration
,
Sliding friction
,
Tension
,
Theoretical analysis
,
Energy dissipation
,
Mechanical properties
,
Optimization
,
Steel
The Effect of Thermo-Hydrodynamics on Manual Automotive Transmissions Gear Rattle
IDETC-CIE 2009; 373-379https://doi.org/10.1115/DETC2009-87226
Topics:
Automotive transmissions
,
Gears
,
Thermohydrodynamics
,
Bearings
,
Creep
,
Engines
,
Friction
,
Lubricants
,
Cycles
,
Gear teeth
Design Procedure of a Nonlinear Vibration Absorber Using Bifurcation Analysis: Application to the Drill-String System
IDETC-CIE 2009; 381-389https://doi.org/10.1115/DETC2009-87358
Topics:
Bifurcation
,
Design
,
Drill strings
,
Nonlinear vibration
,
Vibration
,
Computer software
,
Damping
,
Energy transformation
Nonlinear Modal Analysis of Mechanical Systems With Frictionless Contact Interfaces
IDETC-CIE 2009; 401-407https://doi.org/10.1115/DETC2009-87387
Topics:
Blades
,
Compressors
,
Modal analysis
Energy Harvesting and Scavenging
Energy Harvesting From an Impulsive Load With Essential Nonlinearities
IDETC-CIE 2009; 421-425https://doi.org/10.1115/DETC2009-86669
Topics:
Energy harvesting
,
Stress
,
Excitation
,
Vibration
,
Design
,
Energy resources
,
Linear systems
,
Nonlinear systems
Energy Harvesting From Vibrations With a Nonlinear Oscillator
IDETC-CIE 2009; 427-436https://doi.org/10.1115/DETC2009-86841
Topics:
Energy harvesting
,
Vibration
,
Resonance
,
Excitation
,
Electromagnetic radiation
,
Iron
,
Magnets
,
Random excitation
,
Stators
Harvesting Energy From the Nonlinear Oscillations of a Bistable Piezoelectric Inertial Energy Generator
IDETC-CIE 2009; 447-456https://doi.org/10.1115/DETC2009-86902
Topics:
Generators
,
Oscillations
,
Energy harvesting
,
Bifurcation
,
Design
,
Energy / power systems
,
Energy generation
,
Excitation
,
Harmonic oscillators
,
Laminates
New Insight Into Energy Harvesting via Axially-Loaded Beams
IDETC-CIE 2009; 457-466https://doi.org/10.1115/DETC2009-86974
Topics:
Energy harvesting
,
Excitation
,
Stress
,
Steady state
,
Damping
,
Electric load
,
Energy transformation
,
Physics
Reduced-Order Modeling of Energy Harvesters
IDETC-CIE 2009; 477-488https://doi.org/10.1115/DETC2009-87287
Topics:
Energy harvesting
,
Modeling
,
Eigenvalues
,
Cantilever beams
,
Boundary-value problems
,
Circuits
,
Design
,
Oscillations
,
Partial differential equations
,
Resonance
Energy Harvesting by Vibrations With MEMS Piezoelectric Benders
IDETC-CIE 2009; 489-494https://doi.org/10.1115/DETC2009-87309
Topics:
Energy harvesting
,
Microelectromechanical systems
,
Vibration
,
Electrodes
,
Design
,
Resonance
,
Stress
,
Manufacturing
Segment-Type Energy Harvester Powering Wireless Sensor for Building Automation
IDETC-CIE 2009; 495-504https://doi.org/10.1115/DETC2009-87436
Topics:
Energy harvesting
,
Sensors
,
Vibration
,
Design
,
Energy resources
,
Piezoelectric materials
,
Temperature
,
Air conditioning
,
Batteries
,
Durability
Effect of Material Constants and Mechanical Damping on Piezoelectric Power Generation
IDETC-CIE 2009; 513-522https://doi.org/10.1115/DETC2009-87659
Topics:
Damping
,
Energy generation
,
Piezoelectric ceramics
,
Design
,
Energy harvesting
,
Magnesium (Metal)
,
Vibration
,
Adhesives
,
Crystals
,
Electric power generation
Electromechanical Modeling of the Low Frequency MEMS Energy Harvester
IDETC-CIE 2009; 523-530https://doi.org/10.1115/DETC2009-87710
Topics:
Energy harvesting
,
Microelectromechanical systems
,
Modeling
,
Design
,
Vibration
,
Deflection
,
Free vibrations
,
Mode shapes
Circuit Optimization and Vibration Analysis of Electromagnetic Energy Harvesting Systems
IDETC-CIE 2009; 531-537https://doi.org/10.1115/DETC2009-87728
Topics:
Circuits
,
Electromagnetic radiation
,
Optimization
,
Vibration analysis
,
Cycles
,
Energy harvesting
,
Flow (Dynamics)
,
Transducers
,
Vibration
,
Coulombs
Middleware Design for Energy Harvester of Wireless Sensor Nodes
IDETC-CIE 2009; 539-546https://doi.org/10.1115/DETC2009-87810
Topics:
Design
,
Energy harvesting
,
Sensors
,
Performance evaluation
,
Transducers
,
Wireless sensor networks
Experimental Nonlinear Dynamics and System ID
Thermal Effects on Geometrically Nonlinear Vibrations of Rectangular Plates With Fixed Ends
IDETC-CIE 2009; 547-556https://doi.org/10.1115/DETC2009-86113
Topics:
Plates (structures)
,
Temperature effects
,
Vibration
,
Stainless steel
,
Stress
,
Displacement
,
Excitation
,
Temperature
,
Thermal expansion
Effect of Weight on the Experimental Modal Analysis of Slender Cantilever Beams
IDETC-CIE 2009; 557-560https://doi.org/10.1115/DETC2009-86149
Topics:
Cantilever beams
,
Modal analysis
,
Weight (Mass)
,
Stiffness
,
Cantilevers
,
Stress
,
Buckling
,
Gravity (Force)
,
Mode shapes
,
Structural elements (Construction)
Experimental Study on the Nonlinear Vibration Response of Cone-Shaped Spring Isolator
IDETC-CIE 2009; 569-575https://doi.org/10.1115/DETC2009-86329
Topics:
Attractors
,
Chaos
,
Nonlinear vibration
,
Springs
Development of Experimental Chaos Identification Analysis System
IDETC-CIE 2009; 591-596https://doi.org/10.1115/DETC2009-86633
Topics:
Attractors
,
Chaos
,
Vibration
,
Signals
,
Computer software
,
Nonlinear systems
,
Nonlinear vibration
,
Phase space
,
Time series
Experimental Evaluation of Nonlinear Dynamics and Coupled Motions in a Pantograph
IDETC-CIE 2009; 619-626https://doi.org/10.1115/DETC2009-87246
Topics:
Degrees of freedom
,
Electricity (Physics)
,
Excitation
,
Friction
,
Nonlinear dynamics
,
Signals
,
Stiffness
,
Suspension systems
,
Trains
,
Wire
Modal Testing of Nonlinear Vibrating Structures Based on a Nonlinear Extension of Force Appropriation
IDETC-CIE 2009; 627-635https://doi.org/10.1115/DETC2009-87321
Topics:
Testing
,
Cantilever beams
,
Linear systems
,
Mechanical structures
,
Modal analysis
,
Springs
,
Time series
,
Time-frequency analysis
,
Vibration
Correspondence Between Intrinsic Mode Functions and Slow Flows
IDETC-CIE 2009; 661-670https://doi.org/10.1115/DETC2009-87588
Topics:
Flow (Dynamics)
,
Time series
,
Dynamics (Mechanics)
,
Nonlinear systems
,
Physics
,
Sensors
Concealed Weapon Detection Using Acoustic Spectral Characterisation
IDETC-CIE 2009; 671-677https://doi.org/10.1115/DETC2009-87629
Topics:
Acoustics
,
Weapons
,
Signals
,
Sound waves
,
Audio frequency
,
Shapes
,
Waves
Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
Random Loads Fatigue: The Simulation of Non-Linear Systems
IDETC-CIE 2009; 687-702https://doi.org/10.1115/DETC2009-86251
Topics:
Fatigue
,
Nonlinear systems
,
Simulation
,
Stress
,
Damage
,
Frequency response
,
Spectral energy distribution
FEA Study of Belt Angle Effect to Cornering Stiffness and Ply Steer
IDETC-CIE 2009; 703-705https://doi.org/10.1115/DETC2009-86267
Topics:
Belts
,
Finite element analysis
,
Stiffness
,
Tires
,
Computer software
,
Hardware
,
Shock (Mechanics)
,
Steady state
,
Vehicles
Damage Identification Through Spectral Element Model Updating
IDETC-CIE 2009; 707-713https://doi.org/10.1115/DETC2009-86418
Topics:
Damage
,
Algorithms
,
Computer simulation
,
Design
,
Genetic algorithms
,
Inverse problems
,
Optimization algorithms
,
Structural dynamics
,
Vibration
Modeling of Dynamic Interaction Between Gun System Components During the Recoil Motion of the Gun
IDETC-CIE 2009; 733-738https://doi.org/10.1115/DETC2009-87292
Topics:
Modeling
,
Dynamic response
,
Computers
,
Cycles
,
Firing
,
Algorithms
,
Design
,
Dynamics (Mechanics)
,
Engineering simulation
,
Finite element analysis
Periodic Steady State Response and Fatigue Analysis of a Nonlinear City Bus Model
IDETC-CIE 2009; 739-747https://doi.org/10.1115/DETC2009-87320
Topics:
Buses
,
Fatigue analysis
,
Steady state
,
Excitation
,
Cities
,
Roads
,
Degrees of freedom
,
Dimensions
,
Dynamic response
,
Equations of motion
Experimental Guidelines for NVH Improvements in Helicopter Vibro-Acoustic Comfort
IDETC-CIE 2009; 749-756https://doi.org/10.1115/DETC2009-87383
Topics:
Acoustics
,
Noise (Sound)
,
Design
,
Modal analysis
,
Cavities
,
Experimental analysis
,
Helicopters
,
Leakage
,
Mechanical structures
,
Vibration
Improvement of Degeneracy for Hybrid Transducer
Yung Ting, Le Ba Tan, Gunawan Hariyanto, Bing-Kuan Hou, Lang Van Thang, Cheng-Yu Chen, Tran Thai Son
IDETC-CIE 2009; 773-780https://doi.org/10.1115/DETC2009-87753
Topics:
Transducers
Machinery and Device Vibration
Influence of Quantifiable Extrinsic Stresses on Tin Whisker Growth
Chad L. Rodekohr, George T. Flowers, Michael J. Bozack, Robert N. Dean, Robert L. Jackson, Pradeep Lall
IDETC-CIE 2009; 827-832https://doi.org/10.1115/DETC2009-87849
Topics:
Stress
,
Tin
,
Thin films
,
Aluminum
,
Compressive stress
,
Electronics
,
Finishes
,
Hazardous substances
,
Reliability
,
Risk
Simplified Analysis Strategies for Fluid-Structure Interaction in High Speed Turbomachinery
IDETC-CIE 2009; 839-843https://doi.org/10.1115/DETC2009-87855
Topics:
Fluid structure interaction
,
Turbomachinery
,
Vibration
,
Fluids
,
High pressure (Physics)
,
Design
,
Failure
,
Machinery
,
Unsteady flow
Nonlinear Mechanisms in Bladed Disk Assemblies
Resonance Suppression in Multi-DOF Rotating Flexible Structures Using Order-Tuned Absorbers
IDETC-CIE 2009; 845-854https://doi.org/10.1115/DETC2009-86287
Topics:
Flexible structures
,
Resonance
,
Degrees of freedom
,
Dynamic response
,
Engines
,
Excitation
,
Rotation
,
Traveling waves
,
Vibration
,
Vibration absorbers
Influence of Thermal Effects During Blade-Casing Contact Experiments
IDETC-CIE 2009; 855-862https://doi.org/10.1115/DETC2009-86842
Topics:
Blades
,
Temperature effects
,
Failure
,
Wear
,
Coating processes
,
Coatings
,
Compressors
,
Disks
,
Thermomechanics
,
Damage
Evaluation of Component Mode Synthesis Methods for the Detection of Modal Interaction Through Rotor Stator Contacts
IDETC-CIE 2009; 863-871https://doi.org/10.1115/DETC2009-87036
Topics:
Algorithms
,
Construction
,
Displacement
,
Equations of motion
,
Finite element analysis
,
Finite element methods
,
Friction
,
Momentum
,
Rotors
,
Stators
An Approach on Bladed-Disc Tuning
IDETC-CIE 2009; 873-879https://doi.org/10.1115/DETC2009-87325
Topics:
Disks
,
Blades
,
Eigenvalues
,
Vibration
,
Design
,
Finite element analysis
,
High cycle fatigue
,
Impellers
,
Lasers
,
Resonance
Damping Material Characterization and Modeling: An Industrial Case-Study
IDETC-CIE 2009; 881-888https://doi.org/10.1115/DETC2009-87342
Topics:
Case studies
,
Damping
,
Modeling
,
Blades
,
Compression
,
Computer simulation
,
Engines
,
Fluids
,
Friction
,
Pressure
A Substructure Based Reduced Order Model for Mistuned Bladed Disks
IDETC-CIE 2009; 899-906https://doi.org/10.1115/DETC2009-87459
Topics:
Disks
,
Blades
,
Waves
,
Degrees of freedom
,
Modal analysis
Numerical Investigation of Abradable Coating Wear Through Plastic Constitutive Law: Application to Aircraft Engines
IDETC-CIE 2009; 907-916https://doi.org/10.1115/DETC2009-87669
Topics:
Aircraft engines
,
Coatings
,
Constitutive equations
,
Wear
,
Blades
,
Clearances (Engineering)
,
Compression
,
Damage
,
Engines
,
Leakage flows
Nonlinear Vibration With Optimization Approaches
A Theory for Nonlinear Webs
IDETC-CIE 2009; 917-925https://doi.org/10.1115/DETC2009-86192
Topics:
Textiles
Nonlinear Oscillation and Stability Analysis of the Turning Process With a Worn Tool
IDETC-CIE 2009; 927-934https://doi.org/10.1115/DETC2009-86250
Topics:
Chatter
,
Oscillations
,
Stability
,
Turning
,
Wear
,
Resonance
,
Bifurcation
,
Dynamic systems
,
Excitation
,
Finishes
Nonlinear Dynamic Modeling of Elastic Beam Fixed on a Moving Cart and Carrying Lumped Tip Mass Subjected to External Periodic Force
IDETC-CIE 2009; 935-941https://doi.org/10.1115/DETC2009-86318
Topics:
Automobiles
,
Computer simulation
,
Deflection
,
Deformation
,
Dynamic modeling
,
Equations of motion
,
Excitation
,
Forklifts
,
Hardening
,
Military aircraft
Rotor Dynamics
Bifurcation and Stability of the Periodic Motion of a Rotor Bearing System With Pedestal Looseness and Rub-Impact
IDETC-CIE 2009; 963-970https://doi.org/10.1115/DETC2009-86079
Topics:
Bearings
,
Bifurcation
,
Rotors
,
Stability
,
Clearances (Engineering)
,
Stators
,
Dynamic models
,
Fault diagnosis
,
Security
,
Vibration control
Diagnosis and Treatment of Bowed, Misalign, and Eccentric Rotor Trains
IDETC-CIE 2009; 987-998https://doi.org/10.1115/DETC2009-86307
Topics:
Rotors
,
Trains
,
Vibration
,
Maintenance
,
Root cause analysis
Active Self-Excited Vibration Elimination of Rotating Machine With an Electromagnetic Exciter
IDETC-CIE 2009; 999-1008https://doi.org/10.1115/DETC2009-86405
Topics:
Excitation systems
,
Machinery
,
Vibration
,
Stiffness
,
Fluids
,
Journal bearings
,
Whirls
,
Bearings
,
Load bearing capacity
,
Rotors
Model Based Analysis of Steam-Whip Instability Onsets Occurred in a Power Plant
IDETC-CIE 2009; 1025-1032https://doi.org/10.1115/DETC2009-86474
Topics:
Power stations
,
Steam
,
Flow (Dynamics)
,
Eigenvalues
,
Machinery
,
Stiffness
,
Vibration
,
Whirls
,
Hardening
,
Pressure
Application of Robust Regression Methods to Rotor Balancing Using High Breakdown Point and Bounded-Influence Estimators
IDETC-CIE 2009; 1033-1042https://doi.org/10.1115/DETC2009-86475
Topics:
Rotor balancing
,
Engineering simulation
,
Machinery
,
Power stations
,
Robustness
,
Simulation
,
Turbogenerators
,
Vibration
Updating of the Torsional Model of a Steam Turbo Generator
IDETC-CIE 2009; 1043-1052https://doi.org/10.1115/DETC2009-86553
Topics:
Steam
,
Turbogenerators
,
Machinery
,
Modeling
,
Disks
,
Dynamics (Mechanics)
,
Finite element analysis
,
Fittings
,
Rotors
Calculation of Polynomial Curves for Speed-Dependent Bearing Coefficients
IDETC-CIE 2009; 1053-1061https://doi.org/10.1115/DETC2009-86567
Topics:
Bearings
,
Polynomials
Fault Feature Analysis of Rotor System With Looseness Fault
IDETC-CIE 2009; 1073-1077https://doi.org/10.1115/DETC2009-86647
Stability Analysis of a Cracked Rotor With Several Degrees of Freedom
IDETC-CIE 2009; 1079-1087https://doi.org/10.1115/DETC2009-86764
Topics:
Degrees of freedom
,
Rotors
,
Stability
,
Bearings
,
Excitation
,
Fracture (Materials)
,
Simulation
,
Stiffness
Analysis of a Worn Multirecess Hydrostatic Journal Bearing System
IDETC-CIE 2009; 1089-1095https://doi.org/10.1115/DETC2009-86787
Topics:
Hydrostatics
,
Journal bearings
,
Wear
FEM Modelling and Experimental Verification of a Rotor System With a Open Crack
IDETC-CIE 2009; 1113-1122https://doi.org/10.1115/DETC2009-86898
Topics:
Finite element model
,
Fracture (Materials)
,
Modeling
,
Rotors
,
Resonance
,
Accidents
,
Machinery
,
Risk
Fault Diagnosis of Ball Bearings Using Soft Computing
IDETC-CIE 2009; 1129-1133https://doi.org/10.1115/DETC2009-86926
ANN Based Fault Classification of High Speed Ball Bearings
IDETC-CIE 2009; 1143-1148https://doi.org/10.1115/DETC2009-87016
Topics:
Artificial neural networks
,
Ball bearings
,
Filters
,
Vibration
,
Wavelets
,
Signals
,
Accelerometers
,
Bearings
,
Fault diagnosis
,
Machinery
Modeling and Torsional Vibration Analysis of an Engine Cold-Test Cell for Production Fault Diagnostics
IDETC-CIE 2009; 1157-1166https://doi.org/10.1115/DETC2009-87020
Topics:
Engines
,
Modeling
,
Vibration analysis
,
Vibration
,
Resonance
,
Signals
,
Torque
,
Design
,
Excitation
,
Flaw detection
Introduction of Model-Based Identification Methods Applied to Rotating Machinery of E´lectricite´ de France
Roberto Ricci, Paolo Pennacchi, Franck Meissonnier, Ionel Nistor, Carlo Maria Stoisser, Philippe Voinis
IDETC-CIE 2009; 1167-1177https://doi.org/10.1115/DETC2009-87146
Topics:
Machinery
,
Maintenance
,
Reliability
,
Security
Dynamic Analysis of Ball Bearings Due to Clearance Effect
IDETC-CIE 2009; 1179-1186https://doi.org/10.1115/DETC2009-87147
Analysis of Unbalanced Magnetic Pull Calculation in Generators With Two Pole Pairs
IDETC-CIE 2009; 1195-1203https://doi.org/10.1115/DETC2009-87194
Topics:
Generators
,
Poles (Building)
,
Rotors
,
Stators
,
Electromagnetic force
,
Modeling
,
Steam
,
Turbochargers
,
Turbogenerators
Torsional Vibrations on a Hopper Dredger Due to Transient Conditions
IDETC-CIE 2009; 1215-1224https://doi.org/10.1115/DETC2009-87374
Topics:
Transients (Dynamics)
,
Vibration
,
Stress
,
Control equipment
,
Couplings
,
Damage
,
Engines
,
Gears
,
Governors
,
Propellers
Accounting for Roller Dynamics in the Design of Bifilar Torsional Vibration Absorbers
IDETC-CIE 2009; 1225-1236https://doi.org/10.1115/DETC2009-87431
Topics:
Accounting
,
Design
,
Dynamics (Mechanics)
,
Rollers
,
Vibration absorbers
,
Approximation
,
Rotors
,
Cylinders
,
Equations of motion
,
Errors
Thermoelastic Whirling Analysis of Cylinders During Grinding
IDETC-CIE 2009; 1237-1246https://doi.org/10.1115/DETC2009-87469
Topics:
Cylinders
,
Grinding
,
Thermoelasticity
,
Whirls
,
Eigenfunctions
,
Temperature distribution
,
Deformation
,
Delays
,
Resonance
,
Temperature effects
Analysis of Rotor Bearing Systems With Uncertainties: A Fuzzy Approach
IDETC-CIE 2009; 1247-1257https://doi.org/10.1115/DETC2009-87471
Topics:
Bearings
,
Rotors
,
Uncertainty
,
Displacement
,
Manufacturing
,
Approximation
,
Damping
,
Design
,
Disks
,
Errors
Analysis and Troubleshooting of Steam Induced Instability for an Industrial Turbomachinery
IDETC-CIE 2009; 1269-1275https://doi.org/10.1115/DETC2009-87831
Topics:
Steam
,
Turbomachinery
,
Bearings
,
Fault diagnosis
,
Numerical analysis
,
Stability
,
Stress
,
Trains
,
Vibration
,
Vibration analysis
One-Shot Balancing of Rigid Rotors: A Closed Form Solution
IDETC-CIE 2009; 1285-1293https://doi.org/10.1115/DETC2009-87836
Topics:
Rotors
,
Bearings
,
Computation
,
Damping
,
Stiffness
A Modal Approach for Chaotic Vibrations of a Drillstring
IDETC-CIE 2009; 1305-1314https://doi.org/10.1115/DETC2009-87844
Topics:
Drill strings
,
Vibration
,
Drills (Tools)
,
Finite element analysis
,
Friction
,
Bifurcation
,
Chaos
,
Damping
,
Degrees of freedom
,
Petroleum extraction
Vibration, Stability, and Control
The Analyses of Dynamic Stability at Milling Machine Tools
IDETC-CIE 2009; 1325-1334https://doi.org/10.1115/DETC2009-86070
Topics:
Dynamic stability
,
Milling machines
,
Milling
,
Cutting
,
Vibration
,
Accelerometers
,
Computers
,
Dynamic testing (Engineering)
,
Dynamometers
,
Electric bridges
Using a Vibration Absorber to Suppress Chatter Vibration in Turning Process With a Worn Tool
IDETC-CIE 2009; 1335-1341https://doi.org/10.1115/DETC2009-86100
Topics:
Chatter
,
Turning
,
Vibration
,
Vibration absorbers
,
Wear
Nonlinear Vibrations and Stability of Shells Conveying Water Flow
IDETC-CIE 2009; 1343-1350https://doi.org/10.1115/DETC2009-86114
Uncertainties in Drill Dynamics: The Role of a Random Weight-on-Hook
IDETC-CIE 2009; 1351-1360https://doi.org/10.1115/DETC2009-86233
Topics:
Drills (Tools)
,
Dynamics (Mechanics)
,
Uncertainty
,
Weight (Mass)
,
Drilling
,
Probability
,
Rocks
,
Computer simulation
,
Density
,
Drill strings
On Stability of Periodic Motions in a Switching System With Multiple Subsystems
IDETC-CIE 2009; 1369-1377https://doi.org/10.1115/DETC2009-86269
Topics:
Stability
,
Flow (Dynamics)
,
Bifurcation
Quasi-Active Damping
IDETC-CIE 2009; 1379-1386https://doi.org/10.1115/DETC2009-86582
Topics:
Damping
,
Dampers
,
Design
,
Control equipment
,
Dynamic systems
,
Energy consumption
,
Robustness
,
Simulation
,
Stability
,
Stiffness
Self-Excited Vibrations in a Delay Oscillator: Application to Milling With Simultaneously Engaged Helical Flutes
IDETC-CIE 2009; 1387-1395https://doi.org/10.1115/DETC2009-86636
Topics:
Delays
,
Milling
,
Vibration
,
Stability
,
Performance
,
Cutting
,
Delay differential equations
,
Finite element analysis
Simultaneous Resonances of Geometric Nonlinear Nonuniform Beams
IDETC-CIE 2009; 1397-1402https://doi.org/10.1115/DETC2009-86779
Topics:
Resonance
,
Boundary-value problems
,
Cantilever beams
,
Cantilevers
,
Equations of motion
,
Excitation
,
Vibration
Numerical Studies on the Frequency Response of Vibration of Damped Axially Moving Wire
IDETC-CIE 2009; 1403-1412https://doi.org/10.1115/DETC2009-86880
Topics:
Frequency response
,
Vibration
,
Wire
,
Damping
,
Eigenvalues
,
Excitation
,
Slurries
,
Finishes
,
Free vibrations
,
Semiconductor wafers
Structured Eigensolution Properties of Planetary Gears With Elastically Deformable Ring Gears
IDETC-CIE 2009; 1423-1439https://doi.org/10.1115/DETC2009-87340
Topics:
Gears
,
Planetary gears
,
Eigenfunctions
,
Springs
,
Stiffness
,
Vibration
Nonlinear Resonant Vibration of Counter-Shaft Gears With Fluctuating Mesh Stiffness
IDETC-CIE 2009; 1453-1462https://doi.org/10.1115/DETC2009-87580
Topics:
Gears
,
Resonance
,
Stiffness
,
Vibration
,
Design
,
Dynamic models
,
Dynamics (Mechanics)
,
Excitation
,
Steady state
Switched Stiffness Vibration Controllers for Fluidic Flexible Matrix Composites
IDETC-CIE 2009; 1463-1470https://doi.org/10.1115/DETC2009-87591
Topics:
Composite materials
,
Control equipment
,
Stiffness
,
Vibration
,
Valves
,
Fluids
,
Bulk modulus
,
Dynamic systems
,
Elasticity
,
Equations of motion
Distributed Sensing Signals of Truncated Conical Shells With Clamped-Free Boundary Conditions
IDETC-CIE 2009; 1491-1498https://doi.org/10.1115/DETC2009-87765
Topics:
Boundary-value problems
,
Shells
,
Signals
,
Aerospace industry
,
Displacement
,
Free vibrations
,
Machine tools
,
Membranes
,
Skin
,
Space vehicles
Photonic Control of Plates Laminated With Multi-DOF Photostrictive Actuators
IDETC-CIE 2009; 1499-1507https://doi.org/10.1115/DETC2009-87792
Topics:
Actuators
,
Plates (structures)
,
Flexible structures
,
Laminates
,
Shells
,
Symmetry (Physics)
,
Vibration control
Email alerts
Most Read Proceedings Papers in IDETC-CIE
Case Study Method for Design Research: A Justification
IDETC-CIE2008
Conceptual Design Generation Using Large Language Models
IDETC-CIE2023