Volumes | International Design Engineering Technical Conferences and Computers and Information in Engineering Conference | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

Volume 5: 13th Design for Manufacturability and the Lifecycle Conference; 5th Symposium on International Design and Design Education; 10th International Conference on Advanced Vehicle and Tire Technologies

13th Design for Manufacturing and the Lifecycle Conference (DFMLC)

Assembly and Product Family Design

Modular Design Method for Sustainable Life-Cycle of Product Family Considering Future Market Changes

Tsuyoshi Koga, Kazuhiro Aoyama

IDETC-CIE 2008; 3-10doi:https://doi.org/10.1115/DETC2008-49379

Abstract

View Articletitled, Modular Design Method for Sustainable Life-Cycle of Product Family Considering Future Market Changes

PDF

Topics: Cycles , Design , Design methodology , Sales , Sustainability , Modular construction

Generation of Optimal Assembly Sequences Using Particle Swarm Optimization

Jihong Liu, Yong Wang, Zhicai Gu

IDETC-CIE 2008; 11-18doi:https://doi.org/10.1115/DETC2008-49443

Abstract

View Articletitled, Generation of Optimal Assembly Sequences Using Particle Swarm Optimization

PDF

Topics: Manufacturing , Particle swarm optimization , Algorithms , Optimization , Explosions , Simulated annealing

Minimum-Gap Evaluation Model for Multi-Constraint in One Dimension

Chang-Hsin Kuo, Jhy-Cherng Tsai

IDETC-CIE 2008; 19-24doi:https://doi.org/10.1115/DETC2008-50042

Abstract

View Articletitled, Minimum-Gap Evaluation Model for Multi-Constraint in One Dimension

PDF

Topics: Dimensions , Manufacturing , Fittings , Computational methods , Clearances (Engineering) , Statistical distributions , Taguchi methods

An Investigation of Impact of the Product Family Design on the Shop Floor Performance

Hakan U. Artar, Gu¨l Okudan

IDETC-CIE 2008; 25-34doi:https://doi.org/10.1115/DETC2008-50094

Abstract

View Articletitled, An Investigation of Impact of the Product Family Design on the Shop Floor Performance

PDF

Topics: Design , Manufacturing , Computer simulation , Decision making , Performance

Design for: Mass Customization, Service, Layered Manuf, and Quality

A Functional Classification Framework for the Conceptual Design of Layered Manufacturing Technologies

Christopher B. Williams, Farrokh Mistree, David W. Rosen

IDETC-CIE 2008; 35-48doi:https://doi.org/10.1115/DETC2008-49353

Abstract

View Articletitled, A Functional Classification Framework for the Conceptual Design of Layered Manufacturing Technologies

PDF

Topics: Conceptual design , Manufacturing technology , Additive manufacturing , Engineering prototypes , Metals

Laser Beam Trajectory Generation for Micro-Manufacturing With a Two-Photon Polymerization Technique

Chao-Yaug Liao, Jean-Claude Le´on, Ce´dric Masclet, Michel Bouriau, Patrice L. Baldeck, Tien-Tung Chung

IDETC-CIE 2008; 49-58doi:https://doi.org/10.1115/DETC2008-49403

Abstract

View Articletitled, Laser Beam Trajectory Generation for Micro-Manufacturing With a Two-Photon Polymerization Technique

PDF

Topics: Laser beams , Micromanufacturing , Photons , Polymerization , Trajectories (Physics) , Manufacturing , Shapes , Milling machines , Path planning , Rapid prototyping

Henry Ford and the Model T: Lessons for Product Platforming and Mass Customization

Fabrice Alizon, Steven B. Shooter, Timothy W. Simpson

IDETC-CIE 2008; 59-66doi:https://doi.org/10.1115/DETC2008-49420

Abstract

View Articletitled, Henry Ford and the Model T: Lessons for Product Platforming and Mass Customization

PDF

Topics: Automotive design , Errors , Manufacturing systems , Mass production

Integrated Representation of Function, Service Activity, and Product Behavior for Service Development

Tatsunori Hara, Tamio Arai, Yoshiki Shimomura

IDETC-CIE 2008; 67-76doi:https://doi.org/10.1115/DETC2008-49511

Abstract

View Articletitled, Integrated Representation of Function, Service Activity, and Product Behavior for Service Development

PDF

Topics: Computer-aided design , Design , Modeling

A Customers’ Value Model for Sustainable Service Design

Koji Kimita, Yohei Yoshimitsu, Yoshiki Shimomura, Tamio Arai

IDETC-CIE 2008; 77-85doi:https://doi.org/10.1115/DETC2008-49564

Abstract

View Articletitled, A Customers’ Value Model for Sustainable Service Design

PDF

Topics: Design , Sustainability , Engineering design , Engineering disciplines , Mass production

Defining Specifications for Custom Products: A Bayesian Probabilistic Approach

Yue Wang, Mitchell M. Tseng

IDETC-CIE 2008; 87-95doi:https://doi.org/10.1115/DETC2008-49625

Abstract

View Articletitled, Defining Specifications for Custom Products: A Bayesian Probabilistic Approach

PDF

Topics: Algorithms , Design , Design for Manufacturing , Preferences , Product design , Teams , Uncertainty

A Method of Supporting Conflict Resolution for Service Design

Yoshiki Akiyama, Yoshiki Shimomura, Tamio Arai

IDETC-CIE 2008; 97-105doi:https://doi.org/10.1115/DETC2008-49750

Abstract

View Articletitled, A Method of Supporting Conflict Resolution for Service Design

PDF

Topics: Design , Resolution (Optics) , Computers

Emerging Life Cycle Design for X Methods

3D Visualization-Based Training Systems for Product Maintenance

Qingjin Peng, Tong Zhang, Yikun Xie

IDETC-CIE 2008; 107-115doi:https://doi.org/10.1115/DETC2008-49138

Abstract

View Articletitled, 3D Visualization-Based Training Systems for Product Maintenance

PDF

Topics: Maintenance , Visualization , Life cycle management , Maintainability , User interfaces

Engineering Changes During the Service Phase

Giovanna Vianello, Saeema Ahmed

IDETC-CIE 2008; 117-124doi:https://doi.org/10.1115/DETC2008-49716

Abstract

View Articletitled, Engineering Changes During the Service Phase

PDF

Topics: Aerospace engines , Design , Drilling , Indexing (Machining) , Machinery , Product development

Multi-Users Dynamic Maintenance Document for Complex Mechanical Products: Application for Automobile

Amadou Coulibaly, Ying Huang, Mickae¨l Gardoni, R. Maranzana

IDETC-CIE 2008; 125-133doi:https://doi.org/10.1115/DETC2008-49924

Abstract

View Articletitled, Multi-Users Dynamic Maintenance Document for Complex Mechanical Products: Application for Automobile

PDF

Topics: Automobiles , Maintenance , Mechanical products , Design , Life cycle management

Integrated Product and Process Development Processes

Optimal Formation of Supplier Network for Product Design Phase to Realize an Evolving Product Family

Padmavathi K. Pakala, V. Allada

IDETC-CIE 2008; 135-148doi:https://doi.org/10.1115/DETC2008-49588

Abstract

View Articletitled, Optimal Formation of Supplier Network for Product Design Phase to Realize an Evolving Product Family

PDF

Topics: Design , Product design , Product development , Compression , Computer programming

Sensitivity Analysis of Relative Worth in Empirical and Simulation-Based QFD Matrices

Robins M. Kalapurackal, Shun Takai

IDETC-CIE 2008; 149-158doi:https://doi.org/10.1115/DETC2008-49861

Abstract

View Articletitled, Sensitivity Analysis of Relative Worth in Empirical and Simulation-Based QFD Matrices

PDF

Topics: Sensitivity analysis , Simulation

Integrating Concept Selection in a Software Development Process

Manoj Singiresu, Kumar Boggavarapu, Shun Takai

IDETC-CIE 2008; 159-169doi:https://doi.org/10.1115/DETC2008-49864

Abstract

View Articletitled, Integrating Concept Selection in a Software Development Process

PDF

Topics: Computer software , Software development , Product development , Design engineering , Software architecture

Framework for Generating Modularized Product Designs With Assembly and Variety Considerations

Saraj Gupta, Gu¨l E. Okudan

IDETC-CIE 2008; 171-180doi:https://doi.org/10.1115/DETC2008-50049

Abstract

View Articletitled, Framework for Generating Modularized Product Designs With Assembly and Variety Considerations

PDF

Topics: Manufacturing , Product design , Design , Conceptual design

An Exploratory Study Into Process Failures During the Voice of Customer Process in Product Development

Marcos Esterman, Jr., Roderick F. Zimmerman, Joel Spano, Diego A. Pereda

IDETC-CIE 2008; 181-190doi:https://doi.org/10.1115/DETC2008-50055

Abstract

View Articletitled, An Exploratory Study Into Process Failures During the Voice of Customer Process in Product Development

PDF

Topics: Failure , Product development , Decision making , Failure mechanisms

Manufacturability Analysis

Manufacturability Analysis Using Integrated KBE, CAD and FEM

Joel Johansson

IDETC-CIE 2008; 191-200doi:https://doi.org/10.1115/DETC2008-49019

Abstract

View Articletitled, Manufacturability Analysis Using Integrated KBE, CAD and FEM

PDF

Topics: Computer-aided design , Finite element methods , Finite element model , Finite element analysis , Transparency , Aluminum , Computer software , Design , Engineers , Engines

Analysis of Electrical Discharge Machining Using Water as Dielectric and Diverse Electrode Materials

Hugo Medellin, Aaro´n Flores, Jorge Morales, Alonso de la Garza

IDETC-CIE 2008; 201-207doi:https://doi.org/10.1115/DETC2008-49108

Abstract

View Articletitled, Analysis of Electrical Discharge Machining Using Water as Dielectric and Diverse Electrode Materials

PDF

Topics: Electrical discharge machining , Electrodes , Water , Brass (Metal) , Bronze , Steel , Aluminum , ASTM International , Carbon , Copper

Computer-Aided Fixture Planning: A Review

Xiumei Kang, Qingjin Peng

IDETC-CIE 2008; 209-218doi:https://doi.org/10.1115/DETC2008-49139

Abstract

View Articletitled, Computer-Aided Fixture Planning: A Review

PDF

Topics: Computer-aided engineering

Design for Manufacturing (DFM) Methodology to Implement Friction Stir Welding (FSW) for Automobile Chassis Fabrication

Harish Bagaitkar, Venkat Allada

IDETC-CIE 2008; 219-226doi:https://doi.org/10.1115/DETC2008-49247

Abstract

View Articletitled, Design for Manufacturing (DFM) Methodology to Implement Friction Stir Welding (FSW) for Automobile Chassis Fabrication

PDF

Topics: Automobiles , Design for Manufacturing , Friction , Manufacturing , Welding

Part Design and Process Planning Integration

Probabilistic Evaluation of Product Development Task Planning Using Worth Flow Analysis

Toshiharu Miwa, Hideki Aoyama, Kosuke Ishii

IDETC-CIE 2008; 227-235doi:https://doi.org/10.1115/DETC2008-49142

Abstract

View Articletitled, Probabilistic Evaluation of Product Development Task Planning Using Worth Flow Analysis

PDF

Topics: Flow (Dynamics) , Product development , Uncertainty , Feedback , Cycles , Manufacturing , Mechanical structures , Simulation

Assessing Product Lifecycle Sustainability Using Uncertain Design Information at Conceptual Stage

Q. Z. Yang, B. Song

IDETC-CIE 2008; 237-245doi:https://doi.org/10.1115/DETC2008-49508

Abstract

View Articletitled, Assessing Product Lifecycle Sustainability Using Uncertain Design Information at Conceptual Stage

PDF

Topics: Conceptual design , Design , Sustainability

Enhancing the Efficiency and Accuracy in the Quotation Process of Turned Components

Fredrik Elgh

IDETC-CIE 2008; 247-256doi:https://doi.org/10.1115/DETC2008-49575

Abstract

View Articletitled, Enhancing the Efficiency and Accuracy in the Quotation Process of Turned Components

PDF

Topics: Alloys , Collaboration , Design , Die casting (Process) , Die castings (Product) , Engineering design , Extruding , Injection molding , Machining , Manufacturing

Manufacturing Experience in a Design Context Enabled by a Service Oriented PLM Architecture

Amer C´atic´, Petter Andersson

IDETC-CIE 2008; 257-265doi:https://doi.org/10.1115/DETC2008-49858

Abstract

View Articletitled, Manufacturing Experience in a Design Context Enabled by a Service Oriented PLM Architecture

PDF

Topics: Design , Manufacturing , Design for Manufacturing , Cycles , Product development , Product quality , Aerospace engines , Architecture , Computer-aided design , Concurrent engineering

Metric for Disassembly and Reuse Decisions: Formulation and Validation

Vijitashwa Pandey, Deborah Thurston

IDETC-CIE 2008; 267-277doi:https://doi.org/10.1115/DETC2008-49878

Abstract

View Articletitled, Metric for Disassembly and Reuse Decisions: Formulation and Validation

PDF

Topics: Design , Entropy , Feedback , Maintenance

Sustainable Engineering

Disassembling System of Large Scaled Structure Considering Safety, Environmental Impact, and Economic Efficiency

Tsuyoshi Koga, Motoyuki Matsubara, Kazuhiro Aoyama

IDETC-CIE 2008; 279-288doi:https://doi.org/10.1115/DETC2008-49375

Abstract

View Articletitled, Disassembling System of Large Scaled Structure Considering Safety, Environmental Impact, and Economic Efficiency

PDF

Topics: Safety , Ships , Hull , Developing nations , Recycling , Production planning , Tankers

A Compilation of Design for Environment Principles and Guidelines

Cassandra Telenko, Carolyn C. Seepersad, Michael E. Webber

IDETC-CIE 2008; 289-301doi:https://doi.org/10.1115/DETC2008-49651

Abstract

View Articletitled, A Compilation of Design for Environment Principles and Guidelines

PDF

Topics: Design , Life cycle assessment , Product design , Public policy

High-Stiffness, Lock-and-Key Heat-Reversible Locator-Snap Systems for the Design for Disassembly

Mohammed Shalaby, Kazuhiro Saitou

IDETC-CIE 2008; 303-314doi:https://doi.org/10.1115/DETC2008-49664

Abstract

View Articletitled, High-Stiffness, Lock-and-Key Heat-Reversible Locator-Snap Systems for the Design for Disassembly

PDF

Topics: Design , Heat , Locks (Waterways) , Stiffness , Optimization , Contamination , Damage , Finite element analysis , Genetic algorithms , Heating

An Algorithm for Deriving Transition Matrix Based on Product Architecture

Chang Muk Kang, Min Jung Kwak, Nam Wook Cho, Yoo S. Hong

IDETC-CIE 2008; 315-321doi:https://doi.org/10.1115/DETC2008-49763

Abstract

View Articletitled, An Algorithm for Deriving Transition Matrix Based on Product Architecture

PDF

Topics: Algorithms

Life Cycle Inventory Study of Biologically Inspired Self-Cleaning Surfaces

Laura Raibeck, John Reap, Bert Bras

IDETC-CIE 2008; 323-332doi:https://doi.org/10.1115/DETC2008-49848

Abstract

View Articletitled, Life Cycle Inventory Study of Biologically Inspired Self-Cleaning Surfaces

PDF

Topics: Cycles , Coating processes , Coatings , Design , Durability , Engineering systems and industry applications , Machinery , Nanoscale phenomena , Sprays , Sustainability

5th Symposium on International Design and Design Education (DEC)

Design Learning: Research and Assessment

Efficient Design Testing With Statistical Concept of Degree of Freedom

Thong N. Goh

IDETC-CIE 2008; 335-341doi:https://doi.org/10.1115/DETC2008-49006

Abstract

View Articletitled, Efficient Design Testing With Statistical Concept of Degree of Freedom

PDF

Topics: Degrees of freedom , Design , Testing , Engineers , Experimental design , Bridges (Structures) , Computer software , Engineering prototypes , Fracture (Materials) , Hardware

Creative Thinking in a First Year Mechanical Engineering Design Course at the Massachusetts Institute of Technology: A Community of Practice Model

Monica Rush, David Wallace, Dava Newman

IDETC-CIE 2008; 343-349doi:https://doi.org/10.1115/DETC2008-49364

Abstract

View Articletitled, Creative Thinking in a First Year Mechanical Engineering Design Course at the Massachusetts Institute of Technology: A Community of Practice Model

PDF

Topics: Creativity , Design , Design engineering , Engineering design , Engineering teachers , Manufacturing , Mechanical engineering , Springs , Students , Teaching

Engineering and Industrial Design: An Integrated Interdisciplinary Design Theory

Alexander N. Brezing, Manuel Lo¨wer

IDETC-CIE 2008; 351-357doi:https://doi.org/10.1115/DETC2008-49495

Abstract

View Articletitled, Engineering and Industrial Design: An Integrated Interdisciplinary Design Theory

PDF

Topics: Design theory , Industrial design , Design , Engineering design , Collaboration , Engineers , Engineering design processes , Engineering disciplines , Engineering education , Product development

Exploring the Impact of Virtual and Physical Dissection Activities on Students’ Understanding of Engineering Design Principles

Ann F. McKenna, Wei Chen, Timothy W. Simpson

IDETC-CIE 2008; 359-368doi:https://doi.org/10.1115/DETC2008-49783

Abstract

View Articletitled, Exploring the Impact of Virtual and Physical Dissection Activities on Students’ Understanding of Engineering Design Principles

PDF

Topics: Engineering design , Students , Storage , Computers , Electric drills , Engineering students , Space

Implementing Mini Design Projects to Maximize the Quality of Design-Build Term Project Student Work

George Platanitis, Remon Pop-Iliev

IDETC-CIE 2008; 369-378doi:https://doi.org/10.1115/DETC2008-49816

Abstract

View Articletitled, Implementing Mini Design Projects to Maximize the Quality of Design-Build Term Project Student Work

PDF

Topics: Design , Students , Design engineering , Competencies , Design education , Undergraduate students

Using Video Training Lectures in a Mechanical Engineering Computer-Aided Design Course

Roy T. R. McGrann

IDETC-CIE 2008; 379-384doi:https://doi.org/10.1115/DETC2008-49869

Abstract

View Articletitled, Using Video Training Lectures in a Mechanical Engineering Computer-Aided Design Course

PDF

Topics: Computer-aided design , Mechanical engineering , Students , Computer-aided engineering , Computer software , Design , Design education , Engineering design , Aircraft , Engineers

Aiding Design Decision Making: Adapting Mathematical Paradigms to Fit Designers’ Actual Needs

C. C. Hayes, F. Akhavi

IDETC-CIE 2008; 385-393doi:https://doi.org/10.1115/DETC2008-49929

Abstract

View Articletitled, Aiding Design Decision Making: Adapting Mathematical Paradigms to Fit Designers’ Actual Needs

PDF

Topics: Decision making , Design , Product design , Safety , Theoretical methods

An Investigation on the Students’ Perception of Dissection Effectiveness in a Redesign Context

Gu¨l E. Okudan, Susan Mohammed

IDETC-CIE 2008; 395-401doi:https://doi.org/10.1115/DETC2008-50125

Abstract

View Articletitled, An Investigation on the Students’ Perception of Dissection Effectiveness in a Redesign Context

PDF

Topics: Students , Engineering design , Ambiguity , Data collection , Design , Education , Manufacturing , Reverse engineering , Teams , Undergraduate students

Design Methodology Case Studies

Analysis of Capstone Design Reports: Visual Representations

Sophoria Westmoreland, Ashley Grenier, Linda C. Schmidt

IDETC-CIE 2008; 403-410doi:https://doi.org/10.1115/DETC2008-49378

Abstract

View Articletitled, Analysis of Capstone Design Reports: Visual Representations

PDF

Topics: Design

The Systematic Design of a Layered Manufacturing Process for the Realization of Metallic Parts of Designed Mesostructure

Christopher B. Williams, Farrokh Mistree, David W. Rosen

IDETC-CIE 2008; 411-423doi:https://doi.org/10.1115/DETC2008-49457

Abstract

View Articletitled, The Systematic Design of a Layered Manufacturing Process for the Realization of Metallic Parts of Designed Mesostructure

PDF

Topics: Design , Manufacturing , Additive manufacturing , Design methodology , Metals

Conceptual Design of Identification Systems

Yuan Mao Huang, Chung-Cheng Liao

IDETC-CIE 2008; 425-433doi:https://doi.org/10.1115/DETC2008-49782

Abstract

View Articletitled, Conceptual Design of Identification Systems

PDF

Topics: Conceptual design , Design , Eigenvalues , Decision making , Students

Rationale and Methodology for Deploying Axiomatic Design in Interdisciplinary Capstone Design Courses

Lloyd Gallup, Jay McCormack, Steven Beyerlein, Edwin Odom

IDETC-CIE 2008; 435-444doi:https://doi.org/10.1115/DETC2008-49885

Abstract

View Articletitled, Rationale and Methodology for Deploying Axiomatic Design in Interdisciplinary Capstone Design Courses

PDF

Topics: Design , Design education , Students , Teams , Engineering design processes , Engineering prototypes , Feedback , Hardware , Mentoring

Integrating Design Content Across the Curriculum

Active Learning, Collaborative, and Problem-Based Design Engineering Course Series at the American University of Beirut

Ramsey F. Hamade, Nesreen Ghaddar

IDETC-CIE 2008; 445-451doi:https://doi.org/10.1115/DETC2008-49106

Abstract

View Articletitled, Active Learning, Collaborative, and Problem-Based Design Engineering Course Series at the American University of Beirut

PDF

Topics: Design engineering

The Decline of Design Across the Curriculum

Jeffrey R. Mountain

IDETC-CIE 2008; 453-456doi:https://doi.org/10.1115/DETC2008-49806

Abstract

View Articletitled, The Decline of Design Across the Curriculum

PDF

Topics: Design , Engineering design , Education , Engineering disciplines , Engineering teachers , Mechanical engineering education , Mechatronics , Nanotechnology , Pressure , Renewable energy

Examining Design Tool Use in Engineering Curriculum: A Case Study

W. Stuart Miller, Sudhakar Teegavarapu, Joshua D. Summers

IDETC-CIE 2008; 457-465doi:https://doi.org/10.1115/DETC2008-49978

Abstract

View Articletitled, Examining Design Tool Use in Engineering Curriculum: A Case Study

PDF

Topics: Design , Students , Design education , Engineering education , Engineers , Performance , Teams

Expanding the Product Realization Process to Incorporate Entrepreneurship and Innovation

Philip E. Doepker

IDETC-CIE 2008; 467-472doi:https://doi.org/10.1115/DETC2008-50011

Abstract

View Articletitled, Expanding the Product Realization Process to Incorporate Entrepreneurship and Innovation

PDF

Topics: Entrepreneurship , Innovation , Conceptual design , Design , Intellectual property , Manufacturing , Patents , Project cost estimation , Students , Teams

International Collaboration for Design Education

Teaching Creative Engineering: Education in Japan and the USA

Teruaki Ito, Alexander H. Slocum

IDETC-CIE 2008; 473-482doi:https://doi.org/10.1115/DETC2008-49324

Abstract

View Articletitled, Teaching Creative Engineering: Education in Japan and the USA

PDF

Topics: Engineering education , Teaching , Computer-aided design , Design , Engineering design , Feedback , Manufacturing , Students

Teaching Multinational, Multidisciplinary Sustainable Product Development

Alice M. Agogino, Sara L. Beckman, Vicente Borja, Marcelo Lo´pez, Nathan Shedroff, Alejandro C. Rami´rez

IDETC-CIE 2008; 483-492doi:https://doi.org/10.1115/DETC2008-49388

Abstract

View Articletitled, Teaching Multinational, Multidisciplinary Sustainable Product Development

PDF

Topics: Product development , Sustainability , Teaching , Design , Students , Collaboration , Engineering disciplines , Evaluation methods , Manufacturing , Teams

Innovation, Entrepeneurship and International Experience

Margaret Pinnell, Phillip Doepker, Lori Hanna, Mike Vehar

IDETC-CIE 2008; 493-498doi:https://doi.org/10.1115/DETC2008-49855

Abstract

View Articletitled, Innovation, Entrepeneurship and International Experience

PDF

Topics: Collaboration , Design , Engineers , Innovation , Medical devices , Solar energy , Students

Experiences of a US-India Team in Developing a Case Study That Illustrates Technical and Global Issues in Weld Design

Pramod Rajan, P. K. Raju, Chetan S. Sankar

IDETC-CIE 2008; 499-506doi:https://doi.org/10.1115/DETC2008-50132

Abstract

View Articletitled, Experiences of a US-India Team in Developing a Case Study That Illustrates Technical and Global Issues in Weld Design

PDF

Topics: Design , Teams

Mechatronics Education: Case Studies

The Synergistic Combination of Research, Education, and International Robot Competitions Through the Development of a Humanoid Robot

Karl J. Muecke, Dennis W. Hong

IDETC-CIE 2008; 507-513doi:https://doi.org/10.1115/DETC2008-49531

Abstract

View Articletitled, The Synergistic Combination of Research, Education, and International Robot Competitions Through the Development of a Humanoid Robot

PDF

Topics: Education , Humanoid robots , Robots , Design , Undergraduate students , Graduate research , Graduate students , Mentoring , Particle spin , Rotation

NXT Mobile Inverted Pendulum

Tony Le, Paul Oh

IDETC-CIE 2008; 515-524doi:https://doi.org/10.1115/DETC2008-49667

Abstract

View Articletitled, NXT Mobile Inverted Pendulum

PDF

Topics: Pendulums , Sensors , Computer software , Control equipment , Dynamics (Mechanics) , Hardware , Mechatronics , Mechatronics education , Ultrasonic transducers

Project First: A Case Study in Mechatronics Course Design

Jonathan P. Fiene, Mark Yim

IDETC-CIE 2008; 525-534doi:https://doi.org/10.1115/DETC2008-50030

Abstract

View Articletitled, Project First: A Case Study in Mechatronics Course Design

PDF

Topics: Design , Mechatronics education , Students , Creativity , Robots

Sharing Student Design Experiences

Design and Fabrication of a Microfluidic Pressure Inverter

Andrew K. Palican, Silvio A. Chavez, Jeffrey R. Mountain

IDETC-CIE 2008; 535-541doi:https://doi.org/10.1115/DETC2008-49813

Abstract

View Articletitled, Design and Fabrication of a Microfluidic Pressure Inverter

PDF

Topics: Design , Manufacturing , Microfluidics , Pressure , Compressed air , Energy consumption , Energy efficiency , Grippers , Polishing , Vacuum

Engaging High School Women in Engineering Design Using Cyberinfrastructure

Kenneth W. English, Kevin F. Hulme, Kemper E. Lewis

IDETC-CIE 2008; 543-554doi:https://doi.org/10.1115/DETC2008-49896

Abstract

View Articletitled, Engaging High School Women in Engineering Design Using Cyberinfrastructure

PDF

Topics: Design , Engineering design , Students , Engineering education , Engineers , Simulation , Social networking

Design of a Heat Removal Method for the Electronics in Lithium-Ion Cordless Power Tools

Jessica Dibelka, Mark Steimer, Julianna Twomey, Laura Traub, James Glancey, Steven Phillips, Sam Woods

IDETC-CIE 2008; 555-564doi:https://doi.org/10.1115/DETC2008-49930

Abstract

View Articletitled, Design of a Heat Removal Method for the Electronics in Lithium-Ion Cordless Power Tools

PDF

Topics: Design , Electronics , Heat , Lithium , Drills (Tools) , Heat sinks , MOSFET transistors , Temperature , Modeling , Testing

Design of a Hydraulic Hose and Electric Cable Storage System for Mobile Agricultural Equipment

Sarah Mabel, Doug Erickson, Dan Shannon, Sean Collins, James Glancey, Kevin Smith

IDETC-CIE 2008; 565-573doi:https://doi.org/10.1115/DETC2008-49933

Abstract

View Articletitled, Design of a Hydraulic Hose and Electric Cable Storage System for Mobile Agricultural Equipment

PDF

Topics: Agricultural machinery , Cables , Design , Hydraulic hose , Storage , Engineering prototypes , Computer simulation , Manufacturing , Dimensions , Finite element analysis

Making Connections Between Service and Engineering in K-12 Education

Margaret Pinnell, Rebecca Blust, Jayne Brahler, Margy Stevens

IDETC-CIE 2008; 575-579doi:https://doi.org/10.1115/DETC2008-49990

Abstract

View Articletitled, Making Connections Between Service and Engineering in K-12 Education

PDF

Topics: Design , Education , Engineering teachers , Engineers , Ethics , K-12 students , Mathematics , Science, technology, engineering, and mathematics , Statistics

10th International Conference on Advanced Vehicle and Tire Technologies (AVTT)

Symposium 1: Advances in Methods for Vehicle Systems Design and Control

Development of a Rigid Ring Quarter-Vehicle Model With an Advanced Road Profile Algorithm for Durability and Ride Comfort Predictions

James Allen, II, Moustafa El-Gindy, Kevin Koudela

IDETC-CIE 2008; 583-590doi:https://doi.org/10.1115/DETC2008-49031

Abstract

View Articletitled, Development of a Rigid Ring Quarter-Vehicle Model With an Advanced Road Profile Algorithm for Durability and Ride Comfort Predictions

PDF

Topics: Algorithms , Durability , Matlab , Roads , Tires , Vehicles

Evaluation of Vertical Wall-To-Guardrail Transition

Ali O. Atahan, Guido Bonin, Moustafa El-Gindy

IDETC-CIE 2008; 591-598doi:https://doi.org/10.1115/DETC2008-49088

Abstract

View Articletitled, Evaluation of Vertical Wall-To-Guardrail Transition

PDF

Topics: Automobiles , Bridges (Structures) , Computer simulation , Design , Engineering simulation , Experimental methods , Finite element model , Rails , Safety , Simulation

Comparison of Methods for Dynamic Yaw Control on Vehicles With Multiple Electric Motors: A Literature Review

James A. D’Iorio, Joel Anstrom, Moustafa El-Gindy

IDETC-CIE 2008; 599-605doi:https://doi.org/10.1115/DETC2008-49491

Abstract

View Articletitled, Comparison of Methods for Dynamic Yaw Control on Vehicles With Multiple Electric Motors: A Literature Review

PDF

Topics: Electric motors , Simulation , Testing , Vehicles , Yaw

Passive Periodic Engine Mount

Ling Zheng, Woojin Jung, Zheng Gu, A. Baz

IDETC-CIE 2008; 607-612doi:https://doi.org/10.1115/DETC2008-49523

Abstract

View Articletitled, Passive Periodic Engine Mount

PDF

Topics: Automotive engines , Compression , Electromagnetic spectrum , Engineering prototypes , Engines , Filters , Finite element analysis , Shear (Mechanics) , Vibration

Optimization of Hydro-Pneumatic Suspension of All-Terrain Crane Based on ADAMS

Fuhai Cai, Xin Wang, Shunde Gao, Fuling Zhao

IDETC-CIE 2008; 613-619doi:https://doi.org/10.1115/DETC2008-49556

Abstract

View Articletitled, Optimization of Hydro-Pneumatic Suspension of All-Terrain Crane Based on ADAMS

PDF

Topics: Cranes , Optimization , Dynamics (Mechanics) , Bridges (Structures) , China , Engineering prototypes , Experimental design , Structural optimization

Random Fatigue Failure of MD36 and MD523 Bogie Frames Due to Rail Corrugations

Davood Younesian, Ali Solhmirzaei, Alireza Gachloo, Ebrahim Esmailzadeh

IDETC-CIE 2008; 621-625doi:https://doi.org/10.1115/DETC2008-49686

Abstract

View Articletitled, Random Fatigue Failure of MD36 and MD523 Bogie Frames Due to Rail Corrugations

PDF

Topics: Fatigue failure , Rails , Fatigue life , Stress , Random excitation , Trains , Wheels , Algorithms , Damage , Fatigue

Designing a Lunar Wheel

David Stowe, Kyle Conger, Joshua D. Summers, Paul Joseph, Bart Thompson, Jaret Matthews

IDETC-CIE 2008; 627-639doi:https://doi.org/10.1115/DETC2008-49981

Abstract

View Articletitled, Designing a Lunar Wheel

PDF

Topics: Design , Wheels , Mechanical admittance , Engineering prototypes , Failure mechanisms , Jet propulsion , Tires

An Iterative Approach for Steady State Handling Analysis of Vehicles

Indrasen Karogal, Beshah Ayalew, E. Harry Law

IDETC-CIE 2008; 641-649doi:https://doi.org/10.1115/DETC2008-50033

Abstract

View Articletitled, An Iterative Approach for Steady State Handling Analysis of Vehicles

PDF

Topics: Steady state , Vehicles , Automobiles , Simulation results , Tires , Weight (Mass) , Wheels

Symposium 2: Advances in Vehicle Design Tools to Enhance Safety, Health, and Ergonomics

A Systematic Approach to Support Drive Train Design Using Tools for Human Comfort Evaluation and Customer Classification

Albert Albers, Sarawut Lerspalungsanti, Tobias Du¨ser, Sascha Ott, Jiangang Wang

IDETC-CIE 2008; 651-662doi:https://doi.org/10.1115/DETC2008-49082

Abstract

View Articletitled, A Systematic Approach to Support Drive Train Design Using Tools for Human Comfort Evaluation and Customer Classification

PDF

Topics: Design , Trains , Artificial neural networks , Vibration , Modeling , Product development , Engineering prototypes , Noise (Sound) , Self-organization , Simulation

Enhancement of Ride Comfort Adjusting Seat Stiffness With Air-Cells

Wan-Suk Yoo, Dong W. Park, Min S. Kim, Geum S. Hong

IDETC-CIE 2008; 663-667doi:https://doi.org/10.1115/DETC2008-49131

Abstract

View Articletitled, Enhancement of Ride Comfort Adjusting Seat Stiffness With Air-Cells

PDF

Topics: Stiffness , Computer simulation , Pressure , Automobiles , Computer software , Highways , Vehicles

A Comprehensive Method to Assess the Ride Comfort of Vehicle

G. Mastinu, M. Gobbi, M. Pennati

IDETC-CIE 2008; 669-683doi:https://doi.org/10.1115/DETC2008-49841

Abstract

View Articletitled, A Comprehensive Method to Assess the Ride Comfort of Vehicle

PDF

Topics: Vehicles , Automobiles , Construction , Damping , Design , Dynamic response , Errors , Excitation , Friction , Light trucks

Comparison of Whole-Body Vibration Exposures on Older and Newer Haulage Trucks at an Aggregate Stone Quarry Operation

Alan G. Mayton, Christopher C. Jobes, Richard E. Miller

IDETC-CIE 2008; 685-691doi:https://doi.org/10.1115/DETC2008-50120

Abstract

View Articletitled, Comparison of Whole-Body Vibration Exposures on Older and Newer Haulage Trucks at an Aggregate Stone Quarry Operation

PDF

Topics: Trucks , Vibration , Data collection , Roads , Musculoskeletal system , Risk , Statistical analysis , Vehicles

Symposium 3: Advances in Multibody Systems Modeling and Validation for Vehicle Dynamics Applications

Simulation of Train Derailment in Passing Over Rails With Random Irregularities on a Viscoelastic Foundation

Mohammad Durali, Mohammad Mahdi Jalili

IDETC-CIE 2008; 693-701doi:https://doi.org/10.1115/DETC2008-49012

Abstract

View Articletitled, Simulation of Train Derailment in Passing Over Rails With Random Irregularities on a Viscoelastic Foundation

PDF

Topics: Rails , Simulation , Trains , Probability , Stiffness , Wheelsets , Degrees of freedom , Friction , Kinematics , Suspension systems

Development and Design of a Cost-Efficient Tire Mechanics Testing Apparatus

Brendan J. Chan, Corina Sandu, Erin Hissong, Steve Southward

IDETC-CIE 2008; 703-710doi:https://doi.org/10.1115/DETC2008-49013

Abstract

View Articletitled, Development and Design of a Cost-Efficient Tire Mechanics Testing Apparatus

PDF

Topics: Deflection , Design , Stress , Testing , Tires

Application of Artificial Neural Networks (ANN) Based Model for Monitoring of Vehicle Longitudinal Dynamic Performance

Albert Albers, Jiangang Wang, Sascha Ott, Tobias Du¨ser, Sarawut Lerspalungsanti

IDETC-CIE 2008; 711-717doi:https://doi.org/10.1115/DETC2008-49083

Abstract

View Articletitled, Application of Artificial Neural Networks (ANN) Based Model for Monitoring of Vehicle Longitudinal Dynamic Performance

PDF

Topics: Artificial neural networks , Vehicles , Monitoring systems , Reliability , Condition monitoring , Safety , Sensors , Simulation , Simulation results

Plane Strain Indentation of Snow at the Microscale

Jonah H. Lee

IDETC-CIE 2008; 719-727doi:https://doi.org/10.1115/DETC2008-49374

Abstract

View Articletitled, Plane Strain Indentation of Snow at the Microscale

PDF

Topics: Microscale devices , Plane strain , Tires , Density , Pressure , Algorithms , Compacting , Computers , Friction , Ice

Development of a Multibody Dynamics Ford Expedition Model for Vehicle Dynamics Analysis

Brendan J. Chan, Corina Sandu

IDETC-CIE 2008; 729-737doi:https://doi.org/10.1115/DETC2008-49377

Abstract

View Articletitled, Development of a Multibody Dynamics Ford Expedition Model for Vehicle Dynamics Analysis

PDF

Topics: Multibody dynamics , Transients (Dynamics) , Vehicle dynamics , Vehicles , Simulation , Testing , Automotive design , Automotive engineering , Brakes , Control equipment

Effects of Partially-Filled Containers in Dynamic Behavior of Tanker Trains Traveling on Curved Tracks

Iman Hazrati Ashtiani, Davood Younesian, Mehrnoosh Abedi, Ebrahim Esmailzadeh

IDETC-CIE 2008; 739-747doi:https://doi.org/10.1115/DETC2008-49679

Abstract

View Articletitled, Effects of Partially-Filled Containers in Dynamic Behavior of Tanker Trains Traveling on Curved Tracks

PDF

Topics: Containers , Tankers , Trains , Fluids , Rails , Sloshing , Center of mass , Dynamic analysis , Dynamic systems , Fluid density

Symposium 4: Advances in Vehicle Systems Dynamics and Control

Modeling an Active Vehicle Suspension System With Application of Digital Displacement Pump Motor

Xubin Song

IDETC-CIE 2008; 749-753doi:https://doi.org/10.1115/DETC2008-49035

Abstract

View Articletitled, Modeling an Active Vehicle Suspension System With Application of Digital Displacement Pump Motor

PDF

Topics: Displacement , Engines , Modeling , Motors , Pumps , Suspension systems , Struts (Engineering) , Cylinders , Corners (Structural elements) , Fluids

Kinematic Analysis and Parameter Sensitivity to Hard Points of Five-Link Rear Suspension Mechanism of Passenger Car

Krishna Prasad Balike, S. Rakheja, Ion Stiharu

IDETC-CIE 2008; 755-764doi:https://doi.org/10.1115/DETC2008-49243

Abstract

View Articletitled, Kinematic Analysis and Parameter Sensitivity to Hard Points of Five-Link Rear Suspension Mechanism of Passenger Car

PDF

Topics: Automobiles , Kinematic analysis , Kinematics , Wheels , Sensitivity analysis , Trajectories (Physics) , Computer software , Dynamics (Mechanics) , Simulation results

A Simple ABS Control Strategy

Saied Taheri

IDETC-CIE 2008; 765-772doi:https://doi.org/10.1115/DETC2008-49303

Abstract

View Articletitled, A Simple ABS Control Strategy

PDF

Topics: Antilock braking systems , Braking , Emergencies , Poincaré maps , Vehicles

A New Control Algorithm for Vehicle Stability Control

Seyed Hossein Tamaddoni, Saied Taheri

IDETC-CIE 2008; 773-779doi:https://doi.org/10.1115/DETC2008-49304

Abstract

View Articletitled, A New Control Algorithm for Vehicle Stability Control

PDF

Topics: Control algorithms , Stability , Vehicles , Tires , Algorithms , Degrees of freedom , Emergencies , Equations of motion , Relaxation (Physics) , Simulation models

Design of a Smart Wheel

M. Gobbi, G. Mastinu, G. Rocca

IDETC-CIE 2008; 781-798doi:https://doi.org/10.1115/DETC2008-49838

Abstract

View Articletitled, Design of a Smart Wheel

PDF

Topics: Design , Wheels , Strain gages , Automobiles , Deformation , Geometry , Optimization , Pareto optimization , Safety , Shapes

Kinematic Design and Bond Graph Modeling of an Inertia-Type Infinitely Variable Transmission

Giovanni Berselli, Jacek S. Stecki

IDETC-CIE 2008; 799-808doi:https://doi.org/10.1115/DETC2008-49875

Abstract

View Articletitled, Kinematic Design and Bond Graph Modeling of an Inertia-Type Infinitely Variable Transmission

PDF

Topics: Design , Inertia (Mechanics) , Kinematics , Modeling , Gears , Engineering simulation , Linkages , Planetary gears , Simulation , Trains

Coupled Lateral and Lane Separation Control for 2-D Vehicle Groups

Hao Men, Kishore Pochiraju

IDETC-CIE 2008; 809-817doi:https://doi.org/10.1115/DETC2008-49913

Abstract

View Articletitled, Coupled Lateral and Lane Separation Control for 2-D Vehicle Groups

PDF

Topics: Separation (Technology) , Vehicles , Control equipment

Modeling and Simulation of a Magnetorheological Mount

The Nguyen, Constantin Ciocanel, Mohammad Elahinia

IDETC-CIE 2008; 819-824doi:https://doi.org/10.1115/DETC2008-50130

Abstract

View Articletitled, Modeling and Simulation of a Magnetorheological Mount

PDF

Topics: Damping , Design , Displacement , Flow (Dynamics) , Geometry , Inertia (Mechanics) , Magnetic fields , Modeling , Simulation

Symposium 5: Advances in Analysis, Optimization, and Testing of Energy Efficient Vehicle Powertrain Systems Including Hybrid-Electric (HEV), Pluggable-Hybrid Electric (PHEV), Fuel Cell (FCV) Topologies

A Control-Oriented Two Zone Thermo-Kinetic Model of a Single Cylinder HCCI Engine

Varun Tandra, Nilabh Srivastava

IDETC-CIE 2008; 825-834doi:https://doi.org/10.1115/DETC2008-49278

Abstract

View Articletitled, A Control-Oriented Two Zone Thermo-Kinetic Model of a Single Cylinder HCCI Engine

PDF

Topics: Cylinders , Homogeneous charge compression ignition engines , Combustion , Temperature , Emissions , Exhaust systems , Control equipment , Dynamics (Mechanics) , First law of thermodynamics , Fuels

Concept for Environment Simulation at the Roller Test Bench

Albert Albers, Tobias Du¨ser, Achim Seifermann

IDETC-CIE 2008; 835-839doi:https://doi.org/10.1115/DETC2008-49746

Abstract

View Articletitled, Concept for Environment Simulation at the Roller Test Bench

PDF

Topics: Rollers , Simulation , Vehicles , Acoustics , Dynamics (Mechanics) , Product development , Raw materials , Roads , Security , Topology

Improved Measurement Method for the Identification of the Centre of Gravity Location and of the Inertia Tensor of Rigid Bodies

G. Previati, M. Gobbi, G. Mastinu

IDETC-CIE 2008; 841-850doi:https://doi.org/10.1115/DETC2008-49830

Abstract

View Articletitled, Improved Measurement Method for the Identification of the Centre of Gravity Location and of the Inertia Tensor of Rigid Bodies

PDF

Topics: Center of mass , Inertia (Mechanics) , Tensors , Pendulums , Automobiles , Engines , Errors , Instrumentation , Mass measurement , Satellites

Experimental Stress Measurement Using PhotoStress-Plus: Engine Flywheel Case-Study

Tongele Tongele, Abdul Mohammed

IDETC-CIE 2008; 851-854doi:https://doi.org/10.1115/DETC2008-50013

Abstract

View Articletitled, Experimental Stress Measurement Using PhotoStress-Plus: Engine Flywheel Case-Study

PDF

Topics: Case studies , Engines , Flywheels , Stress , Stress analysis (Engineering) , Construction , Dynamic testing (Materials) , Elasticity , Stress concentration , Structural elements (Construction)

Fuel Efficiency Comparison Between a Conventional and a Hybrid Vehicle Using a Model Based on MATLAB/Simulink and ADAMS

Brian S. Fan, Amir Khajepour, Mehrdad Kazerani

IDETC-CIE 2008; 855-863doi:https://doi.org/10.1115/DETC2008-50028

Abstract

View Articletitled, Fuel Efficiency Comparison Between a Conventional and a Hybrid Vehicle Using a Model Based on MATLAB/Simulink and ADAMS

PDF

Topics: Fuel efficiency , Hybrid electric vehicles , Matlab , Vehicles , Corporate average fuel economy , Cycles , Simulation , Automotive industry , Engines , Fuel consumption

Development of Reverse Dynamic Optimization Methodology for Optimal Powertrain Integration and Control Design

Melody L. Baglione, Mark J. Duty

IDETC-CIE 2008; 865-874doi:https://doi.org/10.1115/DETC2008-50149

Abstract

View Articletitled, Development of Reverse Dynamic Optimization Methodology for Optimal Powertrain Integration and Control Design

PDF

Topics: Design , Optimization , Vehicles , Hardware , Engines , Locks (Waterways) , Roads , Sensitivity analysis , Stress , System efficiency

All Years

Proceedings Papers

13th Design for Manufacturing and the Lifecycle Conference (DFMLC)

Assembly and Product Family Design

Design for: Mass Customization, Service, Layered Manuf, and Quality

Emerging Life Cycle Design for X Methods

Integrated Product and Process Development Processes

Manufacturability Analysis

Part Design and Process Planning Integration

Sustainable Engineering

5th Symposium on International Design and Design Education (DEC)

Design Learning: Research and Assessment

Design Methodology Case Studies

Integrating Design Content Across the Curriculum

International Collaboration for Design Education

Mechatronics Education: Case Studies

Sharing Student Design Experiences

10th International Conference on Advanced Vehicle and Tire Technologies (AVTT)

Symposium 1: Advances in Methods for Vehicle Systems Design and Control

Symposium 2: Advances in Vehicle Design Tools to Enhance Safety, Health, and Ergonomics

Symposium 3: Advances in Multibody Systems Modeling and Validation for Vehicle Dynamics Applications

Symposium 4: Advances in Vehicle Systems Dynamics and Control

Symposium 5: Advances in Analysis, Optimization, and Testing of Energy Efficient Vehicle Powertrain Systems Including Hybrid-Electric (HEV), Pluggable-Hybrid Electric (PHEV), Fuel Cell (FCV) Topologies

Email alerts

Most Read Proceedings Papers in IDETC-CIE

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only