Skip Nav Destination
Proceedings Papers
In This Volume
Volume 1: 21st Biennial Conference on Mechanical Vibration and Noise, Parts A, B, and C
21st Biennial Conference on Mechanical Vibration and Noise
Active, Passive and Hybrid Vibration and Noise Control
Energy Regenerative and Active Control of Automobile Suspension
IDETC-CIE 2007; 3-10https://doi.org/10.1115/DETC2007-34112
Topics:
Automobiles
,
Switches
,
Actuators
,
Circuits
,
Control theory
,
Damping
,
Engines
,
Motors
,
Vibration
,
Vibration control
Dynamic Analysis of a Pneumatic Mounting System for Marine Propulsion Engines
IDETC-CIE 2007; 11-16https://doi.org/10.1115/DETC2007-34192
Topics:
Dynamic analysis
,
Engines
,
Propulsion
,
Springs
Simulation, Design, and Testing of a High Performance Multi-Axis Hexapod for Vibration Isolation
IDETC-CIE 2007; 79-86https://doi.org/10.1115/DETC2007-34502
Topics:
Design
,
Simulation
,
Testing
,
Vibration isolation
,
Degrees of freedom
,
Geometry
,
Hardware
,
Jitter
,
Matlab
,
Rotation
Model Reference Adaptive System for the Noise Control of an Active Piezoelectric Acoustic Box
IDETC-CIE 2007; 95-102https://doi.org/10.1115/DETC2007-34565
Topics:
Acoustics
,
Noise control
,
Control equipment
,
Adaptive structures
,
Adaptive control
,
Control systems
,
Design
,
Excitation
,
Finite element analysis
,
Modeling
Design of an Active Control Engine Mount Using a Direct Drive Electrodynamic Actuator
IDETC-CIE 2007; 103-108https://doi.org/10.1115/DETC2007-34619
Topics:
Actuators
,
Design
,
Engines
,
Engineering prototypes
,
Algorithms
,
Feedback
,
Feedforward control
,
Hydraulic engine mounts
,
Machinery
,
Modeling
Semi-Active Suspension Systems for Railway Vehicles Based on Magnetorheological Fluid Dampers
IDETC-CIE 2007; 137-146https://doi.org/10.1115/DETC2007-34776
Topics:
Dampers
,
Fluids
,
Railway vehicles
,
Suspension systems
,
Dynamics (Mechanics)
,
Trucks
,
Wheelsets
,
Yaw
,
Degrees of freedom
,
Feedback
Vibration Confinement by Minimum Modal Energy Eigenstructure Assignment
IDETC-CIE 2007; 147-154https://doi.org/10.1115/DETC2007-34961
Topics:
Vibration
,
Eigenvalues
,
Closed loop systems
,
Open loop systems
,
Arches
,
Feedback
,
Flexible structures
,
Numerical analysis
,
Performance
The Exploitation of Variability and Noise in Micro Devices
IDETC-CIE 2007; 161-167https://doi.org/10.1115/DETC2007-35036
Topics:
Noise (Sound)
,
Signals
,
Switches
,
Brownian motion
,
Electronic circuits
,
Errors
,
Manufacturing
,
Microelectromechanical systems
,
Random noise
,
Sensors
Nonlinear Dampers Utilizing Polynomial and Step Characteristics
IDETC-CIE 2007; 169-178https://doi.org/10.1115/DETC2007-35154
Topics:
Dampers
,
Polynomials
,
Vibration suppression
,
Resonance
,
Tradeoffs
,
Damping
,
Theoretical analysis
,
Vibration
Effects of Vessel Configurations on the Damping Effects of an Impact Damper Using an Elasto-Plastic Material
IDETC-CIE 2007; 179-186https://doi.org/10.1115/DETC2007-35156
Topics:
Dampers
,
Damping
,
Vessels
,
Computer simulation
,
Particulate matter
,
Collisions (Physics)
,
Dimensions
,
Discrete element methods
,
Elastoplasticity
,
Excitation
Mitigation of Ship Motion Using Passive and Active Anti-Roll Tanks
IDETC-CIE 2007; 215-229https://doi.org/10.1115/DETC2007-35571
Topics:
Ships
,
Seas
,
Surface roughness
,
Waves
,
Pumps
,
Weight (Mass)
,
Center of mass
,
Degrees of freedom
,
Emission spectroscopy
,
Energy consumption
Application of MR Damper in Structural Control Using Genetic Algorithm and Fuzzy Logic PID Tuning Methods
IDETC-CIE 2007; 231-238https://doi.org/10.1115/DETC2007-35613
Topics:
Dampers
,
Fuzzy logic
,
Genetic algorithms
,
Errors
,
Control equipment
,
Earthquakes
,
Fuzzy control
,
Vibration
,
Simulation results
A Magnetorheological Actuation System: Part I — Testing
IDETC-CIE 2007; 239-248https://doi.org/10.1115/DETC2007-35646
Topics:
Active materials
,
Actuators
,
Advanced materials
,
Automotive engineering
,
Bridges (Structures)
,
Centrifugal force
,
Currents
,
Cylinders
,
Design
,
Fluids
A Magnetorheological Actuation System - Part II: Modeling
IDETC-CIE 2007; 249-259https://doi.org/10.1115/DETC2007-35648
Topics:
Modeling
,
Valves
,
Cylinders
,
Bridges (Structures)
,
Fluids
,
Actuators
,
Magnetic fields
,
Automotive engineering
,
Circuits
,
Control equipment
Spin Testing of Pneumatic Artificial Muscle Systems for Helicopter Rotor Applications
IDETC-CIE 2007; 261-268https://doi.org/10.1115/DETC2007-35653
Topics:
Muscle
,
Particle spin
,
Rotation
,
Rotors
,
Spin (Aerodynamics)
,
Testing
,
Blades
,
Actuators
,
Design
,
Engineering prototypes
Adaptive Periodic Noise Cancellation for Cooling Fans With Varying Rotational Speed
IDETC-CIE 2007; 269-277https://doi.org/10.1115/DETC2007-35730
Topics:
Cooling
,
Fans
,
Noise (Sound)
,
Algorithms
,
Control algorithms
,
Engineering simulation
,
Feedback
,
Kalman filters
,
Random noise
,
Simulation
Imbalance Vibration Suppression of Supercritical Shafts With Automatic Balancing Devices
IDETC-CIE 2007; 279-288https://doi.org/10.1115/DETC2007-35767
Topics:
Bearings
,
Computers
,
Control systems
,
Damping
,
Disks
,
Dynamics (Mechanics)
,
Eigenvalues
,
Equilibrium (Physics)
,
Machine tools
,
Nonlinear equations
Applications of Vibration and Acoustics in Biomedical Engineering
Analytical Modeling of Noise in MRI Scanners
IDETC-CIE 2007; 307-311https://doi.org/10.1115/DETC2007-34349
Analytical Modeling of Vibration in MRI Scanners
IDETC-CIE 2007; 313-318https://doi.org/10.1115/DETC2007-34350
Experimental and Numerical Simulations of Percussive Diagnosis of Lung Pathologies
IDETC-CIE 2007; 319-328https://doi.org/10.1115/DETC2007-34578
Topics:
Computer simulation
,
Lung
,
Phantoms
,
Soft tissues
,
Finite element model
,
Acoustical properties
,
Acoustics
,
Excitation
,
Frequency response
,
Water
Viscoelastic Properties of a Cultured Osteoblast Under Adhesive Condition
IDETC-CIE 2007; 329-337https://doi.org/10.1115/DETC2007-34944
Topics:
Adhesives
,
Osteoblasts
,
Viscoelasticity
,
Bone
,
Glass
,
Deflection
,
Piezoelectric actuators
,
Dynamics (Mechanics)
,
Elastic constants
,
Electric motors
Effects of Amplitude and Frequency of Vibration Stimulation on Cultured Osteoblasts
IDETC-CIE 2007; 339-346https://doi.org/10.1115/DETC2007-34949
Topics:
Osteoblasts
,
Vibration
,
Bone
,
Density
,
Plates (structures)
,
Aluminum plate
,
Astronauts
,
Bone fractures
,
Carbon dioxide
,
Creep
An Analytic Model of Subminiature Auditory Sensation System for Sound Source Localization
IDETC-CIE 2007; 347-351https://doi.org/10.1115/DETC2007-35022
Topics:
Acoustics
,
Biomechanics
,
Design
,
Ear
,
Sound pressure
,
Transfer functions
The Effect of Various Physical Phenomena on Wave Propagations in the Human Aorta
IDETC-CIE 2007; 353-356https://doi.org/10.1115/DETC2007-35213
Topics:
Aorta
,
Wave propagation
,
Pressure
,
Transfer functions
,
Bifurcation
,
Blood
,
Blood flow
,
Fluids
,
Navier-Stokes equations
,
Stiffness
Experimental Airway Smooth Muscle Response to Transverse Oscillations
IDETC-CIE 2007; 357-359https://doi.org/10.1115/DETC2007-35222
Topics:
Muscle
,
Oscillations
,
Stiffness
,
Elasticity
,
Inertia (Mechanics)
Coupling Experimental-Based and Analytical Linear/Nonlinear Dynamic Models
Discrete Spectral Modelling of Continuous Structures With Fractional Derivative Viscoelastic Behaviour
IDETC-CIE 2007; 375-384https://doi.org/10.1115/DETC2007-34671
Topics:
Modeling
,
Viscoelasticity
,
Dimensions
,
Equations of motion
,
Rheology
,
Eigenfunctions
,
Modal analysis
,
Polymers
,
Rayleigh-Ritz methods
,
Shapes
Motorcycle Local Stability Analysis Under Acceleration and Braking by Model Linearization and Eigenproblem Solution
IDETC-CIE 2007; 393-403https://doi.org/10.1115/DETC2007-34824
Topics:
Braking
,
Motorcycles
,
Stability
,
Eigenvalues
,
Vehicles
,
Damping
,
Tires
,
Wheels
,
Chatter
,
Differential equations
Damage Detection, Model Updating and System Identification of Mechanical Systems
A Sensitivity-Enhancing Control Approach for Structural Model Updating
IDETC-CIE 2007; 425-437https://doi.org/10.1115/DETC2007-34399
Topics:
Closed loop systems
,
Dynamic analysis
,
Errors
,
Finite element model
,
Modeling
,
Stiffness
,
Structural design
Second-Order Blind Identification for Operational Modal Analysis
IDETC-CIE 2007; 439-445https://doi.org/10.1115/DETC2007-34480
Topics:
Modal analysis
,
Blind source separation
,
Excitation
,
Parameter estimation
,
Signals
,
Stress
,
Structures
,
Traffic
,
Wind
Wavelet-Based Structural Damage Detection
IDETC-CIE 2007; 461-469https://doi.org/10.1115/DETC2007-35632
Dynamics of Band-Gap Materials and Structures
Flexural Vibration Band Gaps in Periodic Sandwich Beams With Auxetic Core
IDETC-CIE 2007; 471-475https://doi.org/10.1115/DETC2007-34131
Topics:
Energy gap
,
Vibration
,
Phononic crystals
,
Computational methods
,
Waves
Acoustic Barriers Based on Sonic Crystals
IDETC-CIE 2007; 477-484https://doi.org/10.1115/DETC2007-34766
Topics:
Acoustics
,
Crystals
,
Noise (Sound)
,
Diffraction
,
Energy gap
,
Geometry
,
Design
,
Optimization
,
Sound
Tailoring of Two-Dimensional Band-Gap Materials for Broadband Frequency Isolation
IDETC-CIE 2007; 485-494https://doi.org/10.1115/DETC2007-35226
Topics:
Energy gap
,
Composite materials
,
Design
,
Damping
,
Genetic algorithms
,
Materials properties
,
Optimization
,
Stress
,
Topology
,
Vibration
Elastic Boundary Layers in Two-Dimensional Isotropic Lattices
IDETC-CIE 2007; 495-504https://doi.org/10.1115/DETC2007-35234
Topics:
Boundary layers
,
Density
,
Arches
,
Deformation
,
Struts (Engineering)
Wave Propagation and Band-Gap Characteristics of Chiral Lattices
IDETC-CIE 2007; 505-515https://doi.org/10.1115/DETC2007-35708
Topics:
Energy gap
,
Wave propagation
,
Dispersion relations
,
Theorems (Mathematics)
,
Traveling waves
,
Waves
Engine and Powertrain Dynamics
Sensitivity of System Boundary Conditions on the Migration of Low Frequency Modes Controlling Longitudinal Vehicle Response
IDETC-CIE 2007; 517-524https://doi.org/10.1115/DETC2007-34628
Topics:
Boundary-value problems
,
Vehicles
,
Engineering prototypes
,
Design
,
Calibration
,
Climate
,
Complex systems
,
Hardware
,
Oscillations
,
Product development
Dynamic Optimization of Spur Gears
IDETC-CIE 2007; 525-533https://doi.org/10.1115/DETC2007-34658
Topics:
Optimization
,
Spur gears
,
Dynamic models
,
Reliability
,
Vibration
,
Dynamic response
,
Gears
,
Optimization algorithms
,
Simulation
,
Torque
On the Effect of Cardboard Liners on Impact-Induced High Frequency Vehicular Driveline Vibrations
IDETC-CIE 2007; 535-539https://doi.org/10.1115/DETC2007-35692
Topics:
Paperboard
,
Vibration
,
Noise (Sound)
,
Automobiles
,
Diluents
,
Elastic moduli
,
Finite element analysis
,
Flywheels
,
Impulse (Physics)
,
Noise control
Plain and Full Floating Bearing Simulations With Rigid Shaft Dynamics
IDETC-CIE 2007; 541-550https://doi.org/10.1115/DETC2007-35897
Topics:
Bearings
,
Dynamics (Mechanics)
,
Engineering simulation
,
Simulation
,
Turbochargers
,
Engines
,
Rotors
,
Damping
,
Excitation
,
Geometry
Engineering Asset Management
Estimating Haul Truck Dutymeters Using Operational Data
IDETC-CIE 2007; 551-555https://doi.org/10.1115/DETC2007-34351
Topics:
Trucks
,
Reliability
,
Cylinders
,
Hazards
,
Hoists
,
Machinery
,
Maintenance
,
Mining machinery
Vibration-Based Monitoring of Automotive Light Assemblies for Failure Detection
IDETC-CIE 2007; 557-562https://doi.org/10.1115/DETC2007-34352
Topics:
Failure
,
Vibration
,
Testing
,
Accelerometers
,
Automotive industry
,
Inspection
,
Manufacturing
,
Microphones
,
Monitoring systems
,
Pressure
Automated Duty Cycle Classification for Online Monitoring Systems
IDETC-CIE 2007; 563-573https://doi.org/10.1115/DETC2007-34666
Topics:
Cycles
,
Monitoring systems
,
Machinery
,
Condition monitoring
,
Vibration
,
Flaw detection
,
Motors
,
Signals
,
Transients (Dynamics)
,
Trenching machinery
Neural Network Modeling and Control of Stoker-Fired Boiler Plant
IDETC-CIE 2007; 575-582https://doi.org/10.1115/DETC2007-35228
Topics:
Artificial neural networks
,
Boilers
,
Chain
,
Control modeling
,
Emissions
,
Fireplaces
,
Pollution
Experimental Nonlinear Dynamics
An Experimental Study of Subcritical Bifurcations in Milling
IDETC-CIE 2007; 599-611https://doi.org/10.1115/DETC2007-34808
Topics:
Bifurcation
,
Milling
,
Cutting
,
Aluminum
,
Attractors
,
Chatter
,
Performance
,
Stability
,
Turning
On the Inharmonicity of a String
IDETC-CIE 2007; 613-622https://doi.org/10.1115/DETC2007-35247
Topics:
String
,
Computer simulation
,
Displacement
,
Engineering simulation
,
Impulse (Physics)
,
Nonlinear equations
,
Shapes
,
Simulation
,
Stiffness
,
Vibration
Suppression of Vibration by Using Antiresonance Point of a Dynamic Vibration Absorber
IDETC-CIE 2007; 623-630https://doi.org/10.1115/DETC2007-35277
Topics:
Antiresonance
,
Control equipment
,
Excitation
,
Filters
,
Resonance
,
Signals
,
Vibration
,
Vibration absorbers
Control of an Impacted Cantilever to Maintain a Constant Magnitude for a Specific Frequency Component of the Response
Masatoshi Numatsu, Hiroshi Yabuno, Andrew J. Dick, Masaharu Kuroda, Kiwamu Ashida, Balakumar Balachandran
IDETC-CIE 2007; 639-648https://doi.org/10.1115/DETC2007-35293
Topics:
Cantilevers
,
Signal processing
Experimental Observations of Nonlinear Nonplanar Oscillations of a Cantilever Beam
IDETC-CIE 2007; 653-661https://doi.org/10.1115/DETC2007-35781
Topics:
Cantilever beams
,
Oscillations
,
Excitation
,
Torsion
,
Vibration
,
Chaos
,
Dynamics (Mechanics)
,
Energy transformation
,
Stress
Linear and Nonlinear Bio-Dynamics
Knee Joint Modeling
IDETC-CIE 2007; 673-678https://doi.org/10.1115/DETC2007-35029
Topics:
Knee
,
Modeling
,
Algorithms
,
Biomechanics
,
Contact modeling
,
Dynamic models
Slow-Time Changes in Human Muscle Fatigue Are Fully Represented in Movement Kinematics
IDETC-CIE 2007; 679-688https://doi.org/10.1115/DETC2007-35173
Topics:
Fatigue
,
Kinematics
,
Muscle
,
Electromyography
,
Dynamics (Mechanics)
,
Manifolds
,
Phase space
,
Dimensions
,
Fractals
,
Signals
A Dummy for Reproducing the Human Whole Body Vibration
IDETC-CIE 2007; 689-700https://doi.org/10.1115/DETC2007-35250
Topics:
Automobiles
,
Construction
,
Dampers
,
Errors
,
Excitation
,
Friction
,
Light trucks
,
Roads
,
Springs
,
Vehicles
Range of Motion of Upper Limb Joint Angles During Two Tasks for Transradial Prosthetic Design
IDETC-CIE 2007; 701-705https://doi.org/10.1115/DETC2007-35349
Topics:
Artificial limbs
,
Design
,
Prostheses
,
Bracing (Construction)
,
Statistical analysis
,
Control systems
,
Electronics
,
Fatigue
,
Testing
,
Weight (Mass)
Inter-Trial Dynamics of Repeated Skilled Movements
IDETC-CIE 2007; 707-716https://doi.org/10.1115/DETC2007-35380
Topics:
Control equipment
,
Dynamic systems
,
Dynamics (Mechanics)
,
Errors
,
Fluctuations (Physics)
,
Manifolds
,
Modeling
,
Stability
Wear Prediction of Total Hip Prostheses Due to Common Activities
IDETC-CIE 2007; 717-724https://doi.org/10.1115/DETC2007-35556
Topics:
Hip joint prostheses
,
Wear
,
Algorithms
,
Alloys
,
Artificial joints
,
Finite element analysis
,
Molecular weight
,
Pressure
,
Simulation
,
Stairs
Micro/Nano Vibration-Based Sensors and Energy Scavengers
Feedback Delays for Ultrasensitive Sensing
IDETC-CIE 2007; 743-750https://doi.org/10.1115/DETC2007-35088
Topics:
Delays
,
Feedback
,
Sensors
,
Manufacturing
,
Cantilevers
,
Damping
,
Limit cycles
,
Mass production
,
Noise (Sound)
A New Nanomechanical Cantilever Sensing Paradigm Using Piezoelectric Boron Nitride Nanotube-Based Actuation
IDETC-CIE 2007; 759-768https://doi.org/10.1115/DETC2007-35425
Topics:
Boron
,
Cantilevers
,
Nanotubes
,
Atomic force microscopy
,
Actuators
,
Microcantilevers
,
Probes
,
Resonance
,
Aluminum
,
Bacteria
Mechanical Considerations for Modeling of Vibration-Based Energy Harvesters
IDETC-CIE 2007; 769-778https://doi.org/10.1115/DETC2007-35440
Topics:
Energy harvesting
,
Modeling
,
Vibration
,
Excitation
,
Circuits
,
Electrodes
,
Microelectromechanical systems
,
Piezoelectric materials
,
Resonance
,
Rotation
Vibration-Based Energy Harvesting With Essential Nonlinearities
IDETC-CIE 2007; 779-786https://doi.org/10.1115/DETC2007-35457
Topics:
Energy harvesting
,
Vibration
,
Excitation
,
Electronics
,
Energy generation
,
Sensors
Parameter Optimization of a Vibration-Based Energy Harvester With an RL Electric Circuit
IDETC-CIE 2007; 787-794https://doi.org/10.1115/DETC2007-35487
Topics:
Circuits
,
Energy harvesting
,
Optimization
,
Vibration
,
Damping
,
Antiresonance
,
Resonance
,
Bifurcation
,
Inductors
,
Piezoelectric ceramics
A Novel Structure for Cantilever-Beam MEMS Power Generator
IDETC-CIE 2007; 813-816https://doi.org/10.1115/DETC2007-35857
Model Identification and Intelligent Systems
GA-Based Fuzzy Logic Control for a Smart Fin of a Projectile
IDETC-CIE 2007; 817-826https://doi.org/10.1115/DETC2007-34159
Topics:
Fuzzy logic
,
Projectiles
Study on the Noise Source Identification Based on a Novel Variable Step-Size Algorithm of Blind Sources Separation
IDETC-CIE 2007; 835-839https://doi.org/10.1115/DETC2007-34434
Topics:
Algorithms
,
Noise (Sound)
,
Separation (Technology)
,
Blind source separation
,
Engineering simulation
,
Errors
,
Feedback
,
Filters
,
Gradient methods
,
Signals
Attitude Control of Air Spring Mounting System Based on Fuzzy Control
IDETC-CIE 2007; 849-854https://doi.org/10.1115/DETC2007-34913
Topics:
Fuzzy control
,
Fuzzy logic
,
Springs
Modeling and Torsional Vibration Analysis of Engine Cold-Test Stand Drivelines
IDETC-CIE 2007; 873-882https://doi.org/10.1115/DETC2007-35647
Topics:
Engines
,
Modeling
,
Vibration analysis
,
Testing
,
Noise (Sound)
,
Signals
,
Resonance
,
Torque
,
Vibration
,
Cylinders
Modeling, Analysis and Characterization of the Dynamics of MEMS and NEMS
A Static and Nonlinear Dynamic Analysis of Resonant Microbeams
IDETC-CIE 2007; 883-892https://doi.org/10.1115/DETC2007-34376
Topics:
Dynamic analysis
,
Microbeams
,
Resonance
,
Approximation
,
Euler-Bernoulli beam theory
,
Excitation
,
Rotation
,
Sensors
,
Spacetime
,
Stability
Design and Simulation of a Miniaturized Tubular Electro-Thermal Actuator
IDETC-CIE 2007; 905-911https://doi.org/10.1115/DETC2007-34668
Topics:
Actuators
,
Design
,
Simulation
,
Displacement
,
Steel
,
Finite element model
,
Heat transfer
,
Lasers
,
Manganese (Metal)
,
Micromachining
The Effect of High Order Non-Linearities on Sub-Harmonic Excitation With Parallel Plate Capacitive Actuators
IDETC-CIE 2007; 923-931https://doi.org/10.1115/DETC2007-34996
Topics:
Actuators
,
Excitation
,
Resonance
,
Approximation
,
Frequency response
,
Signals
,
Capacitors
,
Damping
,
Filtration
,
Microelectromechanical systems
A Novel Capacitive Detection Scheme With Inherent Self-Calibration
IDETC-CIE 2007; 933-941https://doi.org/10.1115/DETC2007-35001
Topics:
Calibration
,
Algorithms
,
Resonance
,
Capacitance
,
Capacitors
,
Engineering simulation
,
Sensors
,
Signals
,
Simulation
Design and Development of a Fused Vision Force Controller for Nanofiber Grasping and Manipulation
IDETC-CIE 2007; 985-994https://doi.org/10.1115/DETC2007-35416
Topics:
Control equipment
,
Design
,
Grasping
,
Nanofibers
,
Manipulators
,
Feedback
,
Kinematics
,
Nanoscale phenomena
,
Resolution (Optics)
,
Computer simulation
Experimental and Theoretical Investigation of New Capacitive Switches Activated by Mechanical Shock and Acceleration
IDETC-CIE 2007; 995-1004https://doi.org/10.1115/DETC2007-35417
Topics:
Shock (Mechanics)
,
Switches
,
Damping
,
Accelerometers
,
Accounting
,
Atmospheric pressure
,
Design
,
Packaging
,
Sealing (Process)
,
Shapes
Nonlinear Vibrations of a Piezoelectrically-Driven Microcantilever for Biologically-Induced Surface Stress Sensing
IDETC-CIE 2007; 1005-1014https://doi.org/10.1115/DETC2007-35419
Topics:
Stress
,
Vibration
,
Equations of motion
,
Actuators
,
Computer simulation
,
Frequency response
,
Geometry
,
Lasers
,
Mechanical properties
,
Piezoelectric materials
The Performance Effects of Squeeze Film Stiffness on Non-Resonate Interferometric Inertial Sensors
IDETC-CIE 2007; 1035-1044https://doi.org/10.1115/DETC2007-35751
Topics:
Sensors
,
Stiffness
,
Resonance
,
Pressure
,
Accelerometers
,
Dynamic response
,
Knudsen number
,
Linear systems
,
Microelectromechanical systems
,
Resolution (Optics)
Phonon Prediction in Toroidal Carbon Nanotubes Using a Continuum Finite Element Approach
IDETC-CIE 2007; 1071-1081https://doi.org/10.1115/DETC2007-35907
Topics:
Carbon nanotubes
,
Finite element analysis
,
Phonons
,
Tensors
,
Eigenvalues
,
Hamilton's principle
,
Kinematics
,
Potential energy
,
Shells
,
Stiffness
Modeling, Vibration and Control of Rotor Systems
Nonlinear Dynamic Behavior of Turbocharger Rotor-Bearing Systems With Hydrodynamic Oil Film and Squeeze Film Damper in Series: Prediction and Experiment
IDETC-CIE 2007; 1083-1092https://doi.org/10.1115/DETC2007-34136
Topics:
Bearings
,
Dampers
,
Rotors
,
Turbochargers
,
Design
,
Pressure
,
Reliability
,
Rotordynamics
,
Temperature
,
Viscosity
Balancing of a Highly Flexible Rotor by Using Artificial Neural Networks
IDETC-CIE 2007; 1093-1099https://doi.org/10.1115/DETC2007-34176
Topics:
Artificial neural networks
,
Rotors
Nonlinear Dynamic Response Analysis of Rotor-Ball Bearing-Stator Coupling System Including Unbalance-Rubbing Coupling Faults
IDETC-CIE 2007; 1101-1109https://doi.org/10.1115/DETC2007-34186
Topics:
Bearings
,
Dynamic response analysis
,
Rotors
,
Stators
,
Stiffness
,
Bifurcation
,
Vibration
,
Ball bearings
,
Chaos
,
Clearances (Engineering)
Suppression of Internal Damping-Induced Instability Using Adaptive Techniques
IDETC-CIE 2007; 1111-1118https://doi.org/10.1115/DETC2007-34187
Topics:
Damping
,
Rotors
,
Composite materials
,
Computer simulation
,
Flywheels
,
Magnetic bearings
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Weight (Mass)
Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing
IDETC-CIE 2007; 1119-1127https://doi.org/10.1115/DETC2007-34303
Topics:
Acoustic emissions
,
Rotors
,
Stators
,
Vibration
,
Signals
,
Vibration analysis
,
Machinery
,
Transducers
,
Wavelet transforms
,
Bearings
Identification of a Rotor Crack in a Gas Turbine Without Twice Per Revolution Symptoms
IDETC-CIE 2007; 1129-1141https://doi.org/10.1115/DETC2007-34323
Topics:
Fracture (Materials)
,
Gas turbines
,
Rotors
,
Machinery
,
Power stations
,
Stiffness
,
Stress
,
Vibration
Practical Balancing of Flexible Rotors for Power Generation
IDETC-CIE 2007; 1143-1152https://doi.org/10.1115/DETC2007-34333
Topics:
Energy generation
,
Rotors
,
Power stations
,
Atlantic Ocean
,
Economics
,
Generators
,
Inertia (Mechanics)
,
Manufacturing
,
Stiffness
,
Turbogenerators
Chaos Properties of a Rotor System With Nonlinear Hydro-Static Bearings
IDETC-CIE 2007; 1153-1158https://doi.org/10.1115/DETC2007-34432
Topics:
Bearings
,
Bifurcation
,
Chaos
,
Hydrostatics
,
Rotors
Imbalance Detection and Health Monitoring From Gain Variations in an Adaptive Disturbance Rejection Controller
IDETC-CIE 2007; 1167-1177https://doi.org/10.1115/DETC2007-34517
Topics:
Control equipment
,
Magnetic bearings
,
Vibration
,
Bearings
,
Crack detection
,
Flywheels
,
Fracture (Materials)
,
Machinery
,
Rotor vibration
,
Rotors
Nonlinear Vibration and Bifurcation Analysis for Rotor-Seal-Bearing Systems of Centrifugal Compressors
IDETC-CIE 2007; 1179-1185https://doi.org/10.1115/DETC2007-34549
Topics:
Bearings
,
Bifurcation
,
Compressors
,
Nonlinear vibration
,
Rotors
,
Excitation
,
Journal bearings
,
Pressure
,
Vibration
,
Disks
Development of Beam-To-Beam Contact Detection Algorithms for Rotor-Stator Rubbing Applications
IDETC-CIE 2007; 1187-1194https://doi.org/10.1115/DETC2007-34625
Topics:
Algorithms
,
Rotors
,
Stators
,
Bearings
,
Diaphragms (Mechanical devices)
,
Diaphragms (Structural)
,
Stress
,
Turbines
,
Turbogenerators
,
Accidents
Nonlinear Vibration in a Vertical Rigid Rotor Supported by the Magnetic Bearing: Case Considering the Delays of Both Electric Current and Magnetic Flux
IDETC-CIE 2007; 1195-1203https://doi.org/10.1115/DETC2007-34637
Topics:
Delays
,
Electric current
,
Magnetic bearings
,
Magnetic flux
,
Nonlinear vibration
,
Rotors
,
Magnetic fields
,
Displacement
,
Machinery
,
Theoretical analysis
Vibration Analysis and Detection of Rotor Crack in a Multi-Disk Rotor System by Periodic Excitation Using AMB
IDETC-CIE 2007; 1205-1214https://doi.org/10.1115/DETC2007-34639
Topics:
Disks
,
Excitation
,
Fracture (Materials)
,
Rotors
,
Vibration analysis
,
Resonance
,
Machinery
,
Accidents
,
Dynamic response
,
Finite element analysis
Nonlinear Dynamic Characterization of Oil-Free Wire Mesh Dampers
IDETC-CIE 2007; 1225-1234https://doi.org/10.1115/DETC2007-34665
Topics:
Dampers
,
Wire mesh
,
Excitation
,
Damping
,
Stiffness
,
Transients (Dynamics)
,
Testing
,
Vibration
Study of Component Mode Synthesis Methods in a Rotor-Stator Interaction Case
IDETC-CIE 2007; 1235-1242https://doi.org/10.1115/DETC2007-34781
Topics:
Rotors
,
Stators
,
Blades
,
Case studies
,
Construction
,
Equations of motion
,
Finite element methods
,
Friction
,
Turbomachinery
Multi-Dimensional Harmonic Balance Applied to Rotor Dynamics
IDETC-CIE 2007; 1243-1249https://doi.org/10.1115/DETC2007-34792
Dynamical Behavior of a Rotor Under Rotational Random Base Excitation
IDETC-CIE 2007; 1251-1260https://doi.org/10.1115/DETC2007-34799
Topics:
Excitation
,
Rotors
,
Density
,
Equations of motion
,
Random excitation
,
Rotation
,
Shapes
,
Simulation
,
Stability
,
White noise
On the “Snubbing” Mechanism for Reducing Blade Vibration
IDETC-CIE 2007; 1261-1270https://doi.org/10.1115/DETC2007-34800
Topics:
Blades
,
Vibration
,
Displacement
,
Fluid dynamics
,
Magnification
,
Turbomachinery
Vibration of the Vertical Rigid Rotor Supported by a Repulsive-Type Magnetic Bearing: Effects of Both the Axial Displacement and the Magnetical Anisotropicities of Magnets
IDETC-CIE 2007; 1271-1280https://doi.org/10.1115/DETC2007-35149
Topics:
Displacement
,
Magnetic bearings
,
Magnets
,
Rotors
,
Vibration
,
Magnetization
,
Permanent magnets
,
Resonance
Thermoelastic Growth of an Auxiliary Bearing Surface Due to Repeated Rotor Dynamic Contact and Rubbing
IDETC-CIE 2007; 1281-1288https://doi.org/10.1115/DETC2007-35214
Topics:
Bearings
,
Rotors
,
Thermoelasticity
,
Transients (Dynamics)
,
Clearances (Engineering)
,
Dynamic response
,
Failure
,
Heating
,
Magnetic bearings
,
Stators
Comparison of Active Control Algorithms for Rotor Unbalance Compensation
IDETC-CIE 2007; 1305-1312https://doi.org/10.1115/DETC2007-35253
Topics:
Control algorithms
,
Rotors
,
Algorithms
,
Electromagnetic actuators
,
Machinery
Computational Model for Calculating the Dynamical Behaviour of Generators Caused by Unbalanced Magnetic Pull and Experimental Validation
IDETC-CIE 2007; 1313-1326https://doi.org/10.1115/DETC2007-35333
Topics:
Generators
,
Machinery
,
Rotors
,
Stators
,
Power stations
,
Electric motors
,
Electromagnetic force
,
Excitation
,
Journal bearings
,
Magnetic fields
Nonlinear Dynamic Characterization and System Identification
Distributed Friction Damping of Traveling Wave Vibration in Rods
IDETC-CIE 2007; 1339-1348https://doi.org/10.1115/DETC2007-34135
Topics:
Damping
,
Friction
,
Rods
,
Traveling waves
,
Vibration
,
Dampers
,
Automotive brakes
,
Boundary-value problems
,
Disks
,
Excitation
Study on the Mechanism for Line Spectrum Reduction in Nonlinear Vibration Isolation System
IDETC-CIE 2007; 1349-1353https://doi.org/10.1115/DETC2007-34141
Topics:
Attractors
,
Chaos
,
Nonlinear vibration
Passive Targeted Energy Transfers and Strong Modal Interactions in a Thin Plate With Strongly Nonlinear End Attachments of Different Configurations
IDETC-CIE 2007; 1355-1370https://doi.org/10.1115/DETC2007-34174
Topics:
Cantilevers
,
Energy transformation
,
Excitation
,
Shock (Mechanics)
,
Stiffness
,
Vibration
,
Wavelet transforms
Statistical Response of a Simplified Nonlinear Fluid Model Under Random Parameters
IDETC-CIE 2007; 1371-1376https://doi.org/10.1115/DETC2007-34219
Topics:
Fluids
,
Displacement
,
Shock absorbers
,
Springs
,
Viscoelastic materials
,
Bioengineering
,
Damping
,
Elastic constants
,
Modeling
,
Nonlinear systems
Stability of SDOF Linear Viscoelastic System Under the Excitation of Narrow-Band Noise
IDETC-CIE 2007; 1377-1385https://doi.org/10.1115/DETC2007-34366
Topics:
Excitation
,
Noise (Sound)
,
Stability
,
Degrees of freedom
,
Eigenvalues
,
Equations of motion
,
Simulation
,
Stress
,
Vibration
Analysis of Randomly Vibrating Systems Using Karhunen-Loe`ve Expansion
IDETC-CIE 2007; 1387-1395https://doi.org/10.1115/DETC2007-34431
Topics:
Displacement
,
Modal analysis
,
Transients (Dynamics)
Estimating Damping Parameters in Multi-Degree-of-Freedom Vibration Systems by Balancing Energy
IDETC-CIE 2007; 1425-1433https://doi.org/10.1115/DETC2007-35340
Topics:
Damping
,
Vibration equipment
,
Cycles
,
Stiffness
,
Degrees of freedom
,
Displacement
,
Harmonic motion
,
Principal component analysis
,
String
,
Vibration
A State-Variable Decomposition Method for Estimating Modal Parameters
IDETC-CIE 2007; 1435-1443https://doi.org/10.1115/DETC2007-35651
Topics:
Damping
,
Degrees of freedom
,
Eigenvalues
,
Modal analysis
,
Principal component analysis
,
Shock absorbers
,
Springs
Effects of a Cracked Blade on Mistuned Turbine Engine Rotor Vibration
IDETC-CIE 2007; 1445-1455https://doi.org/10.1115/DETC2007-35663
Topics:
Blades
,
Gas turbines
,
Rotor vibration
,
Fracture (Materials)
,
Vibration
,
Damage
,
Rotation
,
Degrees of freedom
,
Finite element model
,
Modeling
Identification and Performance Prediction of Nonlinear Degrading Structures
IDETC-CIE 2007; 1457-1467https://doi.org/10.1115/DETC2007-35704
Topics:
Algorithms
,
Design
,
Displacement
,
Earthquakes
,
Ocean waves
,
Sensitivity analysis
,
Stress
,
Structural design
Experimental Identification of a Shear-Mode MR Damper and Numerical Evaluation of Hysteretic Models
IDETC-CIE 2007; 1469-1476https://doi.org/10.1115/DETC2007-35904
Topics:
Dampers
,
Shear (Mechanics)
,
Modeling
,
Actuators
,
Dynamics (Mechanics)
,
Engineering prototypes
,
Fluids
,
Sensors
,
Vibration control
Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
Synthesis of Dynamical Structure of the Hydraulic Breaker With a Vibration-Free Handle
IDETC-CIE 2007; 1503-1511https://doi.org/10.1115/DETC2007-34667
Topics:
Vibration
,
Machinery
,
Design
,
Stiffness
,
Computer simulation
,
Energy conversion
,
Optimal control
Nonlinear Oscillations of an Autoparametrical System With Two Coupled Pendulums
IDETC-CIE 2007; 1513-1518https://doi.org/10.1115/DETC2007-34699
Topics:
Oscillations
,
Pendulums
,
Vibration
,
Bifurcation
,
Resonance
,
Attractors
,
Chaos
,
Damping
,
Degrees of freedom
,
Elasticity
Pareto Optimal Structural Models and Predictions Consistent With Data and Modal Residuals
IDETC-CIE 2007; 1533-1540https://doi.org/10.1115/DETC2007-35197
Topics:
Errors
,
Finite element model
,
Modeling
,
Optimization
Perturbation Analysis of a Clearance-Type Nonlinear System
IDETC-CIE 2007; 1541-1548https://doi.org/10.1115/DETC2007-35814
Topics:
Clearances (Engineering)
,
Nonlinear systems
,
Approximation
,
Belts
,
Design
,
Frequency response
,
Pulleys
,
System dynamics
Nonlinear Phenomena in Wave Propagation and Acoustics
On Multiple Hopf Bifurcations of Airflow Excited Vibration of a Translating String
IDETC-CIE 2007; 1559-1564https://doi.org/10.1115/DETC2007-34451
Topics:
Air flow
,
Bifurcation
,
String
,
Vibration
,
Stability
,
Limit cycles
,
Computation
,
Computer software
,
Equilibrium (Physics)
,
Excitation
Elasto-Viscoplastic Dispersive Waves in Silicon Wafers
IDETC-CIE 2007; 1585-1589https://doi.org/10.1115/DETC2007-35399
Nonlinear System Identification and Reduced Order Modeling
Reduced-Order Modeling of Two-Sided Frictional Interfaces
IDETC-CIE 2007; 1619-1626https://doi.org/10.1115/DETC2007-35448
Topics:
Approximation
,
Chain
,
Elasticity
,
Modal analysis
,
Modeling
Rotor Dynamics: Nonlinear Analysis, Control and Diagnostics
Experimental and Numerical Analysis of Dynamics of the Rotor-Bearing-Seal System
IDETC-CIE 2007; 1653-1664https://doi.org/10.1115/DETC2007-34374
Topics:
Bearings
,
Dynamics (Mechanics)
,
Numerical analysis
,
Rotors
,
Stability
,
Bifurcation
,
Eigenvalues
,
Finite element methods
,
Fluids
,
Journal bearings
Simulation Investigations of the Effect of a Supporting Structure Defect on the Dynamic State of the Rotor Supported on Slide Bearings
IDETC-CIE 2007; 1665-1674https://doi.org/10.1115/DETC2007-34415
Topics:
Bearings
,
Rotors
,
Simulation
,
Computer simulation
,
Damping
,
Dimensions
,
Fracture (Materials)
,
Fracture (Process)
,
Machinery
,
Rotor vibration
The Optimum Design of Hydrodynamic Lubrication Bearing for Minimization of the Total Life Cost
IDETC-CIE 2007; 1689-1696https://doi.org/10.1115/DETC2007-34596
Topics:
Bearings
,
Design
,
Lubrication
,
Journal bearings
,
Design methodology
,
Maintenance
,
Failure
,
Friction
,
Lubrication theory
,
Machine components
Bifurcation and Chaos Behavior of Rotor-Bearing System With Crack and Pedestal Looseness Faults
IDETC-CIE 2007; 1697-1701https://doi.org/10.1115/DETC2007-34616
Topics:
Bearings
,
Bifurcation
,
Chaos
,
Fracture (Materials)
,
Rotors
,
Design
,
Dynamic models
,
Fault diagnosis
,
Journal bearings
,
Security
On the Dynamic Characterization for Flywheel Touchdown Bearing System Design
IDETC-CIE 2007; 1703-1709https://doi.org/10.1115/DETC2007-34974
Topics:
Bearings
,
Design
,
Flywheels
,
Magnetic bearings
,
Density
,
Dynamic testing (Materials)
,
Energy storage
,
Engineering simulation
,
Failure
,
Maintenance
Detection of Carrier-Plate Cracks Using Vibration Spectra
IDETC-CIE 2007; 1719-1729https://doi.org/10.1115/DETC2007-35091
Topics:
Fracture (Materials)
,
Spectra (Spectroscopy)
,
Vibration
,
Damage
,
Gears
,
Planetary gears
,
Mathematical analysis
,
Mechanical drives
,
Sensors
,
Signals
Cracked Rotor Diagnostics Using Soft Computing
IDETC-CIE 2007; 1731-1739https://doi.org/10.1115/DETC2007-35181
Dynamic Stress Concentration on a Semi-Infinite Piezoelectric Medium With a Circular Cavity Near the Surface
IDETC-CIE 2007; 1741-1746https://doi.org/10.1115/DETC2007-35232
Topics:
Cavities
,
Stress concentration
,
Boundary-value problems
,
Die cutting
,
Shearing (Deformation)
,
Wave functions
,
Waves
Analysis of the Elastic Wave Behavior in a Cracked Shaft
IDETC-CIE 2007; 1747-1754https://doi.org/10.1115/DETC2007-35305
Topics:
Acoustics
,
Compression
,
Crack detection
,
Elastic waves
,
Engineering simulation
,
Fracture (Materials)
,
Simulation
,
Wave propagation
,
Waves
The Effect of Surface Waviness and Number of Rolling Elements on the Dynamic Behavior of a Rotor-Bearing System
IDETC-CIE 2007; 1755-1762https://doi.org/10.1115/DETC2007-35389
Topics:
Bearings
,
Rotors
,
Deflection
,
Deformation
,
Dynamic analysis
,
Fourier transforms
,
Springs
,
Stress
,
Vibration
,
Waves
Diagnosing Subsynchronous Vibrations: Unstable or Benign
IDETC-CIE 2007; 1763-1773https://doi.org/10.1115/DETC2007-35694
Topics:
Vibration
,
Rotors
,
Computer simulation
,
Bearings
,
Damage
,
Dry friction
,
Signals
,
Turbomachinery
,
Clearances (Engineering)
,
Compressors
Bifurcation Analysis of a One DOF Rotor on Electromagnetic Bearings
IDETC-CIE 2007; 1775-1782https://doi.org/10.1115/DETC2007-35721
Topics:
Bearings
,
Bifurcation
,
Rotors
,
Computer simulation
,
Control equipment
,
Degrees of freedom
,
Feedback
,
Stability
,
Stress
A New Class of Asynchronous Rotordynamic Response in High-Speed Rotors
IDETC-CIE 2007; 1783-1788https://doi.org/10.1115/DETC2007-35912
Topics:
Rotors
,
Bearings
,
Computer simulation
,
Excitation
,
Gas turbines
,
Stators
,
Stiffness
,
Turbomachinery
,
Vehicles
Self-Organising Features of Rotor-Dynamic Faults
IDETC-CIE 2007; 1789-1794https://doi.org/10.1115/DETC2007-35922
Topics:
Rotors
,
Self-organization
,
Artificial neural networks
,
Signals
,
Algorithms
,
Bearings
,
Condition monitoring
,
Damage
,
Machinery
,
Sensors
A Study of Orifice Compensated Multilobe Hole-Entry Hybrid Journal Bearing
IDETC-CIE 2007; 1795-1801https://doi.org/10.1115/DETC2007-35923
Topics:
Journal bearings