Skip to Main Content
American Society of Mechanical Engineers: Digital Collection Open Menu
Cart
header search
Search
Advanced Search
Skip Nav Destination

Proceedings Papers

Proceedings Volume Cover
ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
September 2–6, 2003
Chicago, Illinois, USA
Conference Sponsors:
  • Design Engineering Division and Computers and Information in Engineering Division
ISBN:
0-7918-3702-5
In This Volume
Volume 4: 9th International Power Transmission and Gearing Conference, Parts A and B

Power Transmission and Gearing

Application of a Multiaxial Fatigue Criterion for the Evaluation of Life of Gears of Complex Geometry
Leonardo Borgianni, Paola Forte, Luigi Marchi
IDETC-CIE 2003; 3-9https://doi.org/10.1115/DETC2003/PTG-48000
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue , Gears , Geometry , Stress , Fatigue life , Damage , Computers , Cycles , Finite element methods , Finite element model
Application of Multiaxial Criteria to Contact Fatigue Assessment of Spur Gears
Piermaria Davoli, Andrea Bernasconi, Luca Carnevali
IDETC-CIE 2003; 11-17https://doi.org/10.1115/DETC2003/PTG-48001
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue , Spur gears , Gears , Stress , Fatigue limit
Deformation Mechanism of Hot Finish Rolling of Plastic Gears: Analysis of Material Flow in Melted Layer
Ichiro Moriwaki, Hidenori Oka
IDETC-CIE 2003; 19-24https://doi.org/10.1115/DETC2003/PTG-48002
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Deformation , Finishes , Flow (Dynamics) , Plastic gears , Gears , Wheels , Finishing , Fluids , Friction , Heat
Spalling Fatigue Life Assessment of Surface Hardened Sintered Gears Based on Fracture Mechanics
Yuji Ohue, Akira Yoshida, Masanori Seki
IDETC-CIE 2003; 25-30https://doi.org/10.1115/DETC2003/PTG-48003
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue life , Fracture mechanics , Gears , Rollers , Fatigue , Machinery , Crack propagation , Cylinder tests (Concrete) , Durability , Electromagnetic induction
Monte Carlo Simulation of Tests for the Determination of Gear Design Allowable Stresses
M. Amorena, M. Barsanti, M. Gubinelli, M. Vitali
IDETC-CIE 2003; 31-37https://doi.org/10.1115/DETC2003/PTG-48004
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Gears , Simulation , Stress , Fatigue , Fatigue testing , Inspection , Sampling methods , Stability , Stairs
Effects of Heating Conditions on Residual Stresses, Hardened Layers and Bending Fatigue Strength of Induction Hardened Gears
Kouitsu Miyachika, Hidefumi Mada, Satoshi Oda, Hiroshige Fujio, Hajime Tsuboi
IDETC-CIE 2003; 39-45https://doi.org/10.1115/DETC2003/PTG-48005
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Electromagnetic induction , Fatigue strength , Gears , Hardening , Heating , Residual stresses
Influence of Shot Peening on Surface Durability of Plasma Case-Hardened Sintered Powder Metal Gears
Akira Yoshida, Yuji Ohue, Masanori Seki
IDETC-CIE 2003; 47-54https://doi.org/10.1115/DETC2003/PTG-48006
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Durability , Gears , Metals , Plasmas (Ionized gases) , Shot peening
Side Tracking in Helical Synchronous Belt Drives Under Torque: Influence of Pulley Flange on Axial Belt Movement
Hiroyuki Ueda, Masanori Kagotani, Tomio Koyama
IDETC-CIE 2003; 55-61https://doi.org/10.1115/DETC2003/PTG-48007
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Belts , Flanges , Pulleys , Timing belts , Torque , Damage , Countermeasures , Fatigue testing
Numerical Simulations of Timing Belt Camshaft Layout: Local and Global Behavior
Daniel Play, Nicolas Fritsch, Ste´phane Huot, Eric Ayax
IDETC-CIE 2003; 63-70https://doi.org/10.1115/DETC2003/PTG-48008
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Camshafts , Computer simulation , Timing belts , Design , Pulleys , Errors , Simulation , Computers , Engineering simulation , Stress
A Study on Jumping Characteristics in Synchronous Belt Drives: Experimental Results and FE Analysis at Driven Pulley Jumping
Tomio Koyama, Weiming Zhang, Masanori Kagotani, Hiroyuki Ueda
IDETC-CIE 2003; 71-76https://doi.org/10.1115/DETC2003/PTG-48009
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finite element analysis , Pulleys , Timing belts , Belts , Simulation , Stress , Stress analysis (Engineering) , Torque
Experimental/Numerical Analysis of the Timing Belt Drive Behavior of a V6 Engine
Lionel Manin, Didier Remond, Jean-Philippe Gaborel
IDETC-CIE 2003; 77-82https://doi.org/10.1115/DETC2003/PTG-48010
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Engines , Numerical analysis , Timing belts , Camshafts , Errors , Pulleys , Arches , Automotive engines , Belts , Cylinders
Meshing Stiffness and Tooth Root Stress for Internal Cylindrical Gears With Thin Rim
Jean-Pierre de Vaujany, Miche`le Guingand, Didier Remond
IDETC-CIE 2003; 83-89https://doi.org/10.1115/DETC2003/PTG-48011
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Stiffness , Stress , Deformation , Computer software , Design , Stress concentration , Tension , Three-dimensional models
Tooth Root Stress and Tooth Contact Stress of the Modified Cycloid Helical Gear
Florin Gabriel Tutulan, Kazuteru Nagamura, Kiyotaka Ikejo
IDETC-CIE 2003; 91-96https://doi.org/10.1115/DETC2003/PTG-48012
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Helical gears , Stress , Design , Computational methods , Durability , Gears , Pressure
Analysis of Tooth Surface Distress Using AGMA 925 and Numerical Load Distribution Methods
Andrea Piazza, Gabriele Bellino
IDETC-CIE 2003; 97-102https://doi.org/10.1115/DETC2003/PTG-48013
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Stress , Gears , Lubricants , Design , Helical gears , Spur gears , Wear
Effect of Tooth Deflection and Corner Contact on Backside Separation (Backlash) of Gear Pairs
Tugan Eritenel, Donald R. Houser, Sandeep M. Vijayakar, James M. Casella
IDETC-CIE 2003; 103-110https://doi.org/10.1115/DETC2003/PTG-48014
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Corners (Structural elements) , Deflection , Gears , Separation (Technology) , Stress , Plastic gears , Finite element analysis , Helical gears , Metals , Plastics
Systematic Investigations on the Influence of Case Depth on the Pitting and Bending Strength of Case Carburized Gears
B.-R. Ho¨hn, P. Oster, T. Tobie
IDETC-CIE 2003; 111-119https://doi.org/10.1115/DETC2003/PTG-48015
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Bending strength , Gears , Stress , Computational methods , Geometry , Residual stresses
Load Bearing Capacity of Super-Carburized Gears
Takao Koide, Koji Tsubokura, Satoshi Oda, Chiaki Namba
IDETC-CIE 2003; 121-127https://doi.org/10.1115/DETC2003/PTG-48016
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carburization , Durability , Fatigue strength , Gears , Load bearing capacity , Rollers , Shot peening
Improvement of the Load Capacity of Carburized Gears Through the Tooth Profile Optimization
Tomoya Masuyama, Katsumi Inoue, Tetsu Sato
IDETC-CIE 2003; 129-138https://doi.org/10.1115/DETC2003/PTG-48017
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Optimization , Stress , Simulation , Fatigue strength , Bending (Stress) , Carburization , Corners (Structural elements) , Fatigue testing , Simulation results
A Testing Device for Fatigue Crack Propagation Experiments on Bevel and Face Gears
Mauro Filippini, Carlo Gorla
IDETC-CIE 2003; 139-144https://doi.org/10.1115/DETC2003/PTG-48018
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue cracks , Gears , Testing , Fatigue testing , Machinery , Torque , Wheels , Cracking (Materials) , Fracture (Process) , Mechanical drives
Transmission Error in Helical Synchronous Belt Drives in Bidirectional Operation: Influence of Pulley Flange Under No Load
Masanori Kagotani, Kenichi Makita, Hiroyuki Ueda, Tomio Koyama
IDETC-CIE 2003; 145-153https://doi.org/10.1115/DETC2003/PTG-48019
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Errors , Flanges , Pulleys , Stress , Timing belts , Belts , Tension , Noise (Sound) , Theoretical analysis
Fatigue Failure Mechanism of Steel Cords in Synchronous Belt
Hideo Takahashi, Hiroshi Iizuka
IDETC-CIE 2003; 155-161https://doi.org/10.1115/DETC2003/PTG-48020
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Cordage , Fatigue failure , Steel , Timing belts , Belts , Wire , Construction , Deformation , Failure , Fatigue
Detection of Land Area Wear in Automotive Synchronous Belts
Tomas Johannesson
IDETC-CIE 2003; 163-169https://doi.org/10.1115/DETC2003/PTG-48021
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Timing belts , Wear , Belts , Pulleys , Failure , Surface roughness , Camshafts , Durability , Failure mechanisms , Internal combustion engines
Fatigue Failure Initiation Site in Synchronous Belts Under Constant and Fluctuating Torque Conditions
Hiroshi Iizuka, Yoshikatsu Ohta, Akihiro Ueno, Takeshi Murakami
IDETC-CIE 2003; 171-177https://doi.org/10.1115/DETC2003/PTG-48022
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue failure , Timing belts , Torque , Stress , Failure , Finite element analysis , Shear stress , Automotive engines , Camshafts
A Weight-Functions Based Approach to Predict Rolling Contact Fatigue Sub-Surface Crack Propagation in Gears
Mario Guagliano, Andrea Piazza, Laura Vergani
IDETC-CIE 2003; 179-186https://doi.org/10.1115/DETC2003/PTG-48023
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Crack propagation , Fatigue , Gears , Rolling contact , Weight (Mass) , Fracture (Materials) , Fatigue cracks , Finite element analysis , Friction , Gear teeth
Do Load Peaks Cause Breakage, Plastic Deformation or Cracks in Case-Hardened Gears?
R. Kage, H. Linke, B. Schlecht
IDETC-CIE 2003; 187-194https://doi.org/10.1115/DETC2003/PTG-48024
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Deformation , Fracture (Materials) , Gears , Stress , Computational methods , Cracking (Materials) , Experimental analysis , Fracture (Process) , Industrial research
Simulating Fatigue Crack Growth in Spiral Bevel Gears Using Computational Fracture Mechanics
Ani Ural, Paul A. Wawrzynek, Anthony R. Ingraffea, David G. Lewicki
IDETC-CIE 2003; 195-199https://doi.org/10.1115/DETC2003/PTG-48025
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fatigue cracks , Fracture mechanics , Spiral bevel gears , Finite element methods , Gears , Pavement live loads , Boundary element methods , Design , Fatigue life , Fracture (Materials)
Numerical Modelling of the Crack Propagation Path at Gear Tooth Root
Damir T. Jelaska, Srecko Glodez, Srdjan Podrug
IDETC-CIE 2003; 201-207https://doi.org/10.1115/DETC2003/PTG-48026
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Crack propagation , Gear teeth , Modeling , Stress , Cycles , Fatigue cracks , Fracture (Materials) , Gears , Service life (Equipment) , Simulation
Gear Tooth Impact Testing
S. B. Rao, R. C. Noss, D. R. McPherson, E. C. DeMeter
IDETC-CIE 2003; 209-214https://doi.org/10.1115/DETC2003/PTG-48027
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gear teeth , Impact testing , Gears , Carbon , Design , Fracture (Materials) , Fracture (Process) , Geometry
Experimental Research on the Vibration and Noise Behavior of Helical Gearing System
Kohei Saiki, Takeshi Watanabe, Terushige Sato
IDETC-CIE 2003; 215-222https://doi.org/10.1115/DETC2003/PTG-48028
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Noise (Sound) , Vibration , Gears , Resonance , Blanks , Torque , Design , Highways , Manufacturing , Noise control
Modulation of Gear Tooth Loading Due to Traveling Wave Vibration
Paul B. Talbert, Richard R. Gockel
IDETC-CIE 2003; 223-230https://doi.org/10.1115/DETC2003/PTG-48029
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gear teeth , Traveling waves , Vibration , Gears , Strain gages , Stress , Engines , Thrust , Bearings , Design
Utilization of Synchronous Averaging of Vibration for Diagnosis of Gear System to Estimate Tooth Error
Chanat Ratanasumawong, Haruo Houjoh, Shigeki Matsumura, Michio Saitoh, Yasushi Ueda
IDETC-CIE 2003; 231-237https://doi.org/10.1115/DETC2003/PTG-48030
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Errors , Gears , Noise (Sound) , Vibration , Vibration measurement
The Adaptation of CNC Helical Guide Technology to the Gear Shaping Process
John M. Lange
IDETC-CIE 2003; 239-246https://doi.org/10.1115/DETC2003/PTG-48031
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer numerical control machine tools , Gears , Cutting , Grinding equipment , Manufacturing
Simulation of Plunge Shaving Operation for Spur and Helical Gear, and Tooth Contact Analysis of Finished Gear Drive
David H. Kim
IDETC-CIE 2003; 247-256https://doi.org/10.1115/DETC2003/PTG-48032
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Helical gears , Mechanical drives , Simulation , Disks , Grinding , Gear teeth , Sharpening , Bearings , Design , Gears
Gear Shaving: Simulation and Technological Studies
Fritz Klocke, Tobias Schro¨der
IDETC-CIE 2003; 257-264https://doi.org/10.1115/DETC2003/PTG-48033
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Simulation , Wear , Cutting , Finishing , Machining , Manufacturing industry , Process simulation , Reliability , Wheels
Gear Finishing With a Nylon Lap
Masahiko Nakae, Kazunori Hidaka, Yasutsune Ariura, Toshinori Matsunami, Masao Kohara
IDETC-CIE 2003; 265-270https://doi.org/10.1115/DETC2003/PTG-48034
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finishing , Gears , Grinding , Nylon fabrics
Analysis and Optimization of the Loaded Meshing of a Face Gear
Miche`le Guingand, Jean-Pierre de Vaujany, Yvan Icard
IDETC-CIE 2003; 271-278https://doi.org/10.1115/DETC2003/PTG-48035
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Optimization , Errors , Computation , Computer software , Pressure
Evaluation of the Effect of Misalignment and Profile Modification in Face Gear Drive by a Finite Element Meshing Simulation
Sandro Barone, Leonardo Borgianni, Paola Forte
IDETC-CIE 2003; 279-288https://doi.org/10.1115/DETC2003/PTG-48036
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finite element analysis , Mechanical drives , Simulation , Stress , Gears , Design , Algorithms , Three-dimensional computer-aided design , Three-dimensional models
Stress Analysis of Face Gear Tooth Subject to Distributed Load Using Global Local Finite Element Method (GLFEM)
Ichiro Moriwaki, Syunpei Ogaya, Koji Watanabe
IDETC-CIE 2003; 289-294https://doi.org/10.1115/DETC2003/PTG-48037
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finite element methods , Gear teeth , Stress , Stress analysis (Engineering) , Gears , Approximation , Bending (Stress) , Boundary-value problems , Finite element analysis , Stress concentration
Face Gearing With a Conical Involute Pinion: Part 2 — The Face Gear: Meshing With the Pinion, Tooth Geometry and Generation
Jie Tan
IDETC-CIE 2003; 297-306https://doi.org/10.1115/DETC2003/PTG-48038
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Geometry , Computer numerical control machine tools , Design , Gear teeth , Grinding
Face Gear Transmission Development Program at Sikorsky Aircraft
David A. Binney, Harsh Vinayak, Yuiry Gmirya, Lawrence M. Zunski, D. R. Houser, E. C. Ames
IDETC-CIE 2003; 307-313https://doi.org/10.1115/DETC2003/PTG-48039
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Aircraft , Gears , Computer software , Design , Stress , Unmanned aerial vehicles , Army , Aviation , Inspection , Manufacturing technology
Simulations of Gear-Rolling Element Bearing Interactions in Geared Transmissions
F. Lahmar, P. Velex
IDETC-CIE 2003; 315-324https://doi.org/10.1115/DETC2003/PTG-48040
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Bearings , Engineering simulation , Gears , Simulation , Couplings , Algorithms , Ball bearings , Contact mechanics , Cylinders , Equations of motion
Simulation of Torsional Vibrations or Multibody Simulation: Which Technique Does the Wind Power Industry Need for Solving the Present-Day Problems?
Berthold Schlecht, Tobias Schulze, Jens Demtro¨der
IDETC-CIE 2003; 325-332https://doi.org/10.1115/DETC2003/PTG-48042
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Simulation , Vibration , Wind power , Turbines , Stress , Trains , Rotors , Bearings , Generators , Testing
Dynamic Analysis of Multi-Mesh Helical Gear Sets by Finite Elements
M. Kubur, A. Kahraman, D. M. Zini, K. Kienzle
IDETC-CIE 2003; 333-342https://doi.org/10.1115/DETC2003/PTG-48043
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Dynamic analysis , Finite element analysis , Helical gears , Bearings , Dimensions , Dynamic models , Finite element model , Gears , Vibration
The Traveling Chain Transmission: A Novel Two-Speed Chain Drive
Norman R. Bucknor, Hamid Vahabzadeh
IDETC-CIE 2003; 343-352https://doi.org/10.1115/DETC2003/PTG-48044
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Chain , Corporate average fuel economy , Design , Drive chain , Engineering prototypes , Fuel efficiency , Motors , Pumps , Testing , Vehicles
The Development of the Traction Drive Mechanism Made of the Plastic Magnet
Akira Shoji, Giichi Kawashima
IDETC-CIE 2003; 353-358https://doi.org/10.1115/DETC2003/PTG-48045
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Magnets , Traction , Disks , Magnetism , Plastics , Gears , Poles (Building) , Ferrites (Magnetic materials) , Magnetic induction , Magnetization
Shaft Drive CVT: A New Type CVT Applying Crossed Axle Traction Drive
Masashi Yamanaka, Katsumi Inoue, Genso Igari, Yukihito Narita
IDETC-CIE 2003; 359-365https://doi.org/10.1115/DETC2003/PTG-48046
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Traction , Disks , Rollers , Design , Engineering prototypes , Particle spin , Rotation , Shapes , Spin (Aerodynamics) , Torque
A Simplified Method for the Design of Narrow V-Belt Drives
Frank H. Schaefer
IDETC-CIE 2003; 367-372https://doi.org/10.1115/DETC2003/PTG-48047
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Horsepower , V-belts
Coupled Belt-Pulley Vibration in Serpentine Drives With Belt Bending Stiffness
Lingyuan Kong, Robert G. Parker
IDETC-CIE 2003; 373-383https://doi.org/10.1115/DETC2003/PTG-48048
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Belts , Pulleys , Stiffness , Vibration , String , Design , Eigenvalues
Product Model for Gear Units
B.-R. Hoehn, K. Steingroever, M. Jaros
IDETC-CIE 2003; 385-395https://doi.org/10.1115/DETC2003/PTG-48049
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears
An Intelligent Design System for Agile Design and Manufacturing of Mechanical Transmission Systems
El-Sayed Aziz, C. Chassapis
IDETC-CIE 2003; 397-408https://doi.org/10.1115/DETC2003/PTG-48050
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Forging , Gears , Internet , Manufacturing , Mechanical drives , Optimization
Application of a System Level Model to Study the Planetary Load Sharing Behavior
Avinash Singh
IDETC-CIE 2003; 409-416https://doi.org/10.1115/DETC2003/PTG-48051
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Stress , Gears , Torque , Errors , Manufacturing , Stiffness , Bearings , Needles , Sun gears , Systems analysis
A Model of the Dynamic Behavior of Spur Gears With Consideration of Off-Line-of-Action Contacts
O. Duverger, P. Velex, L. Vedmar, P. Sainsot
IDETC-CIE 2003; 417-424https://doi.org/10.1115/DETC2003/PTG-48052
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Spur gears , Gears , Stress , Cylinders , Dampers , Deflection , Degrees of freedom , Engines , Motors
Analysis of the Mesh Characteristics of Hypoid Gear Pair Dynamics
Hongbin Wang, Teik C. Lim
IDETC-CIE 2003; 425-431https://doi.org/10.1115/DETC2003/PTG-48053
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Dynamics (Mechanics) , Spiral bevel gears , Gears , Stress , Bevel gears , Dynamic models , Errors , Finite element model , Gear teeth , Geometry
Rotational Vibration of a Spur Gear Pair Having Tooth Helix Deviation: Effect of Lead Modifications
Yuichi Ogawa, Shigeki Matsumura, Haruo Houjoh, Taichi Sato
IDETC-CIE 2003; 433-440https://doi.org/10.1115/DETC2003/PTG-48054
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Spur gears , Vibration
Dynamic Analysis of Sliding Friction in a Gear Pair
Rajendra Gunda, Rajendra Singh
IDETC-CIE 2003; 441-448https://doi.org/10.1115/DETC2003/PTG-48055
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Dynamic analysis , Gears , Sliding friction , Friction , Stiffness , Stress , Torque , Contact mechanics , Coulombs , Cycles
Cutter Interchangeability for Spiral-Bevel and Hypoid Gear Manufacturing
Claude Gosselin, Jack Masseth, Wei Liang
IDETC-CIE 2003; 449-457https://doi.org/10.1115/DETC2003/PTG-48056
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Spiral bevel gears , Gears , Algorithms , Bearings , Coordinate measuring machines , Dimensions , Geometry , Pressure , Storage
Gear-Cutting Method of Parallel Depth Hypoid Gears
Akira Homma, Sumio Hirokawa, Akira Yamamoto
IDETC-CIE 2003; 459-465https://doi.org/10.1115/DETC2003/PTG-48058
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Cutting , Gears , Spiral bevel gears , Bearings
A Study on Reducing the Gear Tooth Profile Error by Finish Roll Forming
Seizo Uematsu, Sung-Ki Lyu, Donald R. Houser, Ju-Suck Lim, Long Lu
IDETC-CIE 2003; 467-472https://doi.org/10.1115/DETC2003/PTG-48059
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Errors , Finishes , Gear teeth , Pressure , Displacement , Gears , Spur gears
Tip-Fillet Interference in Cylindrical Gears
Jan Willem Polder, Hans Broekhuisen
IDETC-CIE 2003; 473-479https://doi.org/10.1115/DETC2003/PTG-48060
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears
Influence of Undercut on the Load Capacity for Involute Teeth With Small Pressure Angle
Jose´ I. Pedrero, Mariano Arte´s, Carlos Garci´a-Masia´
IDETC-CIE 2003; 481-487https://doi.org/10.1115/DETC2003/PTG-48061
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Pressure , Stress
Determination of Addendum Modification Coefficients for Spur Gears Operating at Non-Standard Center Distances
M. A. Sahir Arikan
IDETC-CIE 2003; 489-499https://doi.org/10.1115/DETC2003/PTG-48063
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Spur gears , Gears , Stress , Clearances (Engineering) , Design , Gear teeth , Geometry , Mechanical drives , Optimization
A Study on Noise and Wear of Injection Molded Plastic Gears With Deformed Layer
Tadayoshi Ohisa, Akira Shoji, Masanori Sasaki, Katsumi Inoue
IDETC-CIE 2003; 501-506https://doi.org/10.1115/DETC2003/PTG-48064
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Injection molded plastics , Noise (Sound) , Plastic gears , Wear
Investigation of the Noise and Vibration of Planetary Gear Drives
Yong Chen, Akira Ishibashi
IDETC-CIE 2003; 507-513https://doi.org/10.1115/DETC2003/PTG-48065
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Noise (Sound) , Planetary gears , Vibration
Analytical Predictions for the Transmission Error Excitation in Various Multiple-Mesh Gear-Trains
V. Kartik, Donald R. Houser
IDETC-CIE 2003; 515-524https://doi.org/10.1115/DETC2003/PTG-48066
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Errors , Excitation , Gear trains , Gears , Stress , Algorithms , Deflection , Excitation systems , Finite element model , Kinematics
Mesh Phasing Relationships in Planetary and Epicyclic Gears
R. G. Parker, J. Lin
IDETC-CIE 2003; 525-534https://doi.org/10.1115/DETC2003/PTG-48067
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Planetary gears , Stress , Design , Dynamic response , Noise (Sound) , Torque , Vibration , Weight (Mass)
Simulation of Hobbing for Analysis of Cutting Edge Failure Due to Chip Crush
Masaharu Komori, Masaoki Sumi, Aizoh Kubo
IDETC-CIE 2003; 535-541https://doi.org/10.1115/DETC2003/PTG-48068
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Cutting , Failure , Gears , Simulation , Clearances (Engineering) , Damage , Manufacturing , Probability , Surface quality
Remedies for Cutting Edge Failure of Carbide Hob Due to Chip Crush: Some Results of Evaluation by This Method in Automotive Industry
Masaharu Komori, Masaoki Sumi, Aizoh Kubo
IDETC-CIE 2003; 543-550https://doi.org/10.1115/DETC2003/PTG-48069
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Automotive industry , Cutting , Failure , Gears , Simulation , Clearances (Engineering) , Countermeasures , Damage , Finishes , Manufacturing
Direct Dry Hobbing of High Hardened Material: RGC (Round Bar Gear Cutting) Method
Keigo Fukunaga, Syunji Inoue, Masataka Yonekura, Isao Sakuragi
IDETC-CIE 2003; 551-557https://doi.org/10.1115/DETC2003/PTG-48070
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Cutting , Gears , Gearmotors , Manufacturing , Noise (Sound) , Vibration , Heat treating (Metalworking) , Machinery , Carbon steel , Computer numerical control machine tools
Potential of Carbide Tools for High Performance Hobbing
Fritz Klocke, Oliver Winkel
IDETC-CIE 2003; 559-565https://doi.org/10.1115/DETC2003/PTG-48071
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Carbide cutting tools , Design , Coating processes , Coatings , Cutting , Gears , Geometry , Impulse (Physics) , Manufacturing , Simulation
Tooth Flank Corrections of Wide Face Width Helical Gears That Account for Shaft Deflections
Shan Chang, Donald R. Houser, Jonny Harianto
IDETC-CIE 2003; 567-574https://doi.org/10.1115/DETC2003/PTG-48072
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Deflection , Helical gears , Gears , Stress , Errors , Geometry , Design , Displacement , Equilibrium (Physics) , Finite element analysis
New Approach to Computerized Design of Spur and Helical Gears
V. I. Goldfarb, A. A. Tkachev
IDETC-CIE 2003; 575-578https://doi.org/10.1115/DETC2003/PTG-48073
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer-aided design , Design , Helical gears
Advanced Computer Modeling Technique in Gear Engineering
V. I. Goldfarb, S. V. Lunin, E. S. Trubachov
IDETC-CIE 2003; 579-583https://doi.org/10.1115/DETC2003/PTG-48074
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer simulation , Gears , Computer software , Design , Mechanical drives , Modeling , Numerical analysis , Shapes , Simulation , Three-dimensional modeling
Design of New Gear Tooth Profiles: Algorithm and Programming
Thomas Yeh, Daniel C. H. Yang, Shih-Hsi Tong
IDETC-CIE 2003; 585-594https://doi.org/10.1115/DETC2003/PTG-48075
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Algorithms , Computer programming , Design , Gear teeth , Gears , Stress , Bending (Stress) , B-splines , Machinery , Rotors
High-Reduction, High-Torque Gear Reducer Design Emphasizes Compactness
Jim B. Surjaatmadja, James C. Tucker
IDETC-CIE 2003; 595-600https://doi.org/10.1115/DETC2003/PTG-48076
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Gears , Torque
Conveying High Torque via an Efficient, High Reduction Ratio, Coaxial, Lightweight A-XYZ Transmission™
Manfred R. Kuehnle
IDETC-CIE 2003; 601-604https://doi.org/10.1115/DETC2003/PTG-48077
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Torque , Kinematics , Stress , Weight (Mass) , Acoustics , Durability , Electric motors , Fuels , Gears , Machine components
Development and Application of an Automatic Design System for Multi-Stage Gear Drives
Inho Bae, Tae Hyong Chong, Aizoh Kubo
IDETC-CIE 2003; 605-614https://doi.org/10.1115/DETC2003/PTG-48078
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Mechanical drives , Algorithms , Gears , Durability , Engineering design processes , Engines , Gear trains , Motors
A Generalized Kinematics and Power Flow Analysis Methodology for Automatic Transmission Gear Trains
A. Kahraman, K. Kienzle, D. M. Zini
IDETC-CIE 2003; 615-623https://doi.org/10.1115/DETC2003/PTG-48079
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flow (Dynamics) , Gear trains , Kinematics , Gears , Planetary gears , Algorithms , Bearings , Gear teeth , Kinematic analysis , Torque
Gearbox Systems Dynamic Modelling for Diagnostic Fault Detection
Walter Bartelmus, Radosław Zimroz
IDETC-CIE 2003; 625-633https://doi.org/10.1115/DETC2003/PTG-48080
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flaw detection , Mechanical drives , Modeling , System dynamics , Signals , Computer simulation , Vibration , Gears , Fracture (Materials) , Artificial neural networks
Gear Diagnosis by Stress Wave Analysis
David B. Board
IDETC-CIE 2003; 635-644https://doi.org/10.1115/DETC2003/PTG-48081
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Friction , Gears , Shock (Mechanics) , Stress , Waves
Understanding Vibration Spectra of Planetary Gear Systems for Fault Detection
Marianne Mosher
IDETC-CIE 2003; 645-652https://doi.org/10.1115/DETC2003/PTG-48082
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flaw detection , Flight , Kinematics , Planetary gears , Spectra (Spectroscopy) , Vibration , Vibration measurement
Gear Defect Diagnosis Using Acoustic Emission
David Mba
IDETC-CIE 2003; 653-656https://doi.org/10.1115/DETC2003/PTG-48083
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Acoustic emissions , Gears
Vibration Processing Techniques for Fault Detection in Gearboxes
Andrzej B. Wilk, Henryk M. Madej, Bogusław E. Łazarz
IDETC-CIE 2003; 657-664https://doi.org/10.1115/DETC2003/PTG-48084
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flaw detection , Vibration , Signals , Helical gears , Condition monitoring , Gear teeth , Machinery , Signal processing , Spur gears , Vibration analysis
Digital Approach for the Solution of Gearing Problems
I. M. Egorov, L. Morrish
IDETC-CIE 2003; 665-672https://doi.org/10.1115/DETC2003/PTG-48085
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer software , Computers , Coordinate measuring machines , Cutting , Deformation , Gear teeth , Gears , Geometry , Machining , Manufacturing
Kinematics of Meshing Surfaces Using Geometric Algebra
Scott M. Miller
IDETC-CIE 2003; 673-681https://doi.org/10.1115/DETC2003/PTG-48086
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Algebra , Kinematics , Screws , Gears
New Investigation on the Geometry of the Contact in Gear Generation
Marco Gabiccini, Massimo Guiggiani, Francesca Di Puccio
IDETC-CIE 2003; 683-693https://doi.org/10.1115/DETC2003/PTG-48087
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Geometry
Development of Conical Involute Gears (Beveloids) for Vehicle Transmissions
J. Bo¨rner, K. Humm, F. Joachim
IDETC-CIE 2003; 695-702https://doi.org/10.1115/DETC2003/PTG-48089
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Automotive transmissions , Gears , Geometry , Bevel gears , Design , Helical gears , Robots , Spur gears , Testing , Torque
Dynamic Modeling of a Dual-Clutch Automated Lay-Shaft Transmission
Y. Zhang, X. Chen, X. Zhang, W. Tobler, H. Jiang
IDETC-CIE 2003; 703-708https://doi.org/10.1115/DETC2003/PTG-48090
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer software , Design , Dynamic modeling , Dynamics (Mechanics) , Kinematics , Modeling , Simulation , Transients (Dynamics) , Vehicles
The Autark Hybrid in a Test Vehicle: First Results
Bernd-Robert Ho¨hn, Hermann Pflaum, Thomas Schmidbauer
IDETC-CIE 2003; 709-719https://doi.org/10.1115/DETC2003/PTG-48091
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Vehicles , Traffic , Air pollution , Batteries , Design , Electric motors , Energy consumption , Engineering prototypes , Fuel consumption , Internal combustion engines
Enhanced Approach for Application of Longitudinal Plunging in Manufacturing of Spur Gear Drives
Claudio Zanzi, Jose´ I. Pedrero
IDETC-CIE 2003; 721-730https://doi.org/10.1115/DETC2003/PTG-48092
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Manufacturing , Spur gears , Disks , Grinding , Trajectories (Physics) , Bearings , Bending (Stress) , Design , Errors , Innovation
Form Grinding of Helical Gears: Effects of Disk Shaped Tools Plunging
Carlo Gorla, Francesco Rosa
IDETC-CIE 2003; 731-739https://doi.org/10.1115/DETC2003/PTG-48093
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Disks , Grinding , Helical gears , Gears , Gear teeth , Stress , Deformation , Design , Geometry , Grinding equipment
Surface Damage Caused by Gear Profile Grinding and Their Effects on Flank Load Carrying Capacity
Fritz Klocke, Heiko Schlattmeier
IDETC-CIE 2003; 741-749https://doi.org/10.1115/DETC2003/PTG-48094
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Damage , Gears , Grinding , Load bearing capacity , Surface properties , Grinding wheels , Geometry , Machining , Reliability , Risk
Coroning: High Performance Gear Honing Without Dressing
Thomas Schenk, Ulrich Uebel, Friedrich Wo¨lfel
IDETC-CIE 2003; 751-759https://doi.org/10.1115/DETC2003/PTG-48095
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Finishing , Gears
Requirement for Limits of Action and Wildhaber’s Limit Normal
Sho Honda
IDETC-CIE 2003; 761-769https://doi.org/10.1115/DETC2003/PTG-48096
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computational methods , Design , Gears , Spiral bevel gears
Conical Involute Gear: Development, Applications, and View for Tomorrow
Ken-ichi Mitome, Tatsuya Ohmachi, Hidenori Komatsubara
IDETC-CIE 2003; 771-778https://doi.org/10.1115/DETC2003/PTG-48097
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Design , Cutting , Dimensions , Finishing , Grinding , Industrial research , Manufacturing systems , Stress
Approach for Topological Synthesis of Hyperbolic Gear Drives
Carlos Garci´a-Masia´, Jose´ I. Pedrero
IDETC-CIE 2003; 779-783https://doi.org/10.1115/DETC2003/PTG-48098
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Manufacturing , Mechanical drives , Worm gears
Contributions to the Study of Generation of the Flanks of the Generating Hook of Cylindrical Curved Gear in Oblong Cycloidal Arc
Iulian Sta˘na˘s¸el, Ioan Mihaila, Adrian Ghionea
IDETC-CIE 2003; 785-789https://doi.org/10.1115/DETC2003/PTG-48099
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Cutting tools , Cutting , Geometry , Machinery , Manufacturing , Matlab , Milling , Shapes
Friction and Wear Characteristics of Natural Iron Sand Coating
Yasuo Kondo, Takao Koide, Kouitsu Miyachika, Fumio Obata
IDETC-CIE 2003; 791-796https://doi.org/10.1115/DETC2003/PTG-48100
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coating processes , Coatings , Friction , Iron , Sands , Wear
Friction and Wear of Surface Modified Stainless Steel Gears and Rollers in High Vacuum
Masahiro Fujii, Akira Yoshida, Tomoki Harano
IDETC-CIE 2003; 797-804https://doi.org/10.1115/DETC2003/PTG-48101
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Friction , Gears , Rollers , Spur gears , Stainless steel , Vacuum , Wear
Modelling of Film Thickness and Traction in a Variable Ratio Traction Drive Rig
K. J. Sharif, H. P. Evans, R. W. Snidle, J. P. Newall
IDETC-CIE 2003; 805-815https://doi.org/10.1115/DETC2003/PTG-48102
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Film thickness , Modeling , Traction , Lubricants , Viscosity , Pressure , Rheology , Stress , Temperature , Elastohydrodynamic lubrication
A Surface Wear Prediction Model for Parallel-Axis Gear Pairs
P. Bajpai, A. Kahraman, N. E. Anderson
IDETC-CIE 2003; 817-826https://doi.org/10.1115/DETC2003/PTG-48103
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Wear , Contact mechanics , Engineering simulation , Errors , Helical gears , Machinery , Manufacturing , Simulation
Open Gears for the Mining Industry: Material and Manufacturing Process Selection
Ivo Botto, Eduardo O. Hurtado, Stephen S. Lovell
IDETC-CIE 2003; 827-851https://doi.org/10.1115/DETC2003/PTG-48104
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Alloys , Gears , Manufacturing , Mining industry , Welding
Development of a Novel Gear Measuring Device of High Accuracy
Frank Ha¨rtig, Christian Keck, Karin Kniel, Heinrich Schwenke, Klaus Wendt, Franz Wa¨ldele
IDETC-CIE 2003; 853-857https://doi.org/10.1115/DETC2003/PTG-48105
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Coordinate measuring machines , Calibration , Interferometers , Engineering simulation , Lasers , Manufacturing industry , Measurement uncertainty , Metrology , Simulation
A New Calibration Facility for the UK’s National Gear Metrology Laboratory
R. C. Frazer, P. Mancasola, G. Mikoleizig
IDETC-CIE 2003; 859-868https://doi.org/10.1115/DETC2003/PTG-48106
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Calibration , Gears , Measurement uncertainty , Metrology
Predictions of Wear and Transmission Errors of Cylindrical Worm Gears
X. Wang, L. Morrish
IDETC-CIE 2003; 869-874https://doi.org/10.1115/DETC2003/PTG-48107
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Errors , Wear , Worm gears , Stress , Computer software , Shapes , Bronze , Cutting , Cycles , Design
Optimal Tooth Modifications in Hypoid Gears
Vilmos V. Simon
IDETC-CIE 2003; 875-884https://doi.org/10.1115/DETC2003/PTG-48108
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Spiral bevel gears , Errors , Gears , Optimization , Pressure , Stress
Computer Aided Tooth Contact Analysis in Cylindrical Worm Gears
Vilmos V. Simon
IDETC-CIE 2003; 885-894https://doi.org/10.1115/DETC2003/PTG-48109
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Computer-aided engineering , Worm gears , Computer software , Errors , Gear teeth , Gears , Geometry , Kinematics , Stress
Characteristics of Profile-Shifted Straight Bevel Gears With Octoid Form
Chi-Kang Chang, Chung-Biau Tsay
IDETC-CIE 2003; 895-901https://doi.org/10.1115/DETC2003/PTG-48110
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Bevel gears , Gears , Computers
Analysis of Microelastohydrodynamic and Mixed Lubrication Effects in Gear Tooth Contacts
M. J. A. Holmes, H. P. Evans, R. W. Snidle
IDETC-CIE 2003; 903-911https://doi.org/10.1115/DETC2003/PTG-48111
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Elastohydrodynamic lubrication , Gear teeth , Leakage , Lubricants , Lubrication , Transient analysis
Coatings for Automotive Planetary Gearsets
N. E. Anderson, L. C. Lev
IDETC-CIE 2003; 913-922https://doi.org/10.1115/DETC2003/PTG-48112
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coatings , Gears , Carbon , Ceramic coatings , Diamonds , Fatigue , Fatigue life , Lubricants , Lubrication , Power density
Engineered Surfaces for Improved Gear Scuffing Resistance
Carl R. Ribaudo, Chris Aylott, Dieter Hofmann, Craig V. Darragh, Ryan D. Evans, Elizabeth P. Cooke, Gary L. Doll
IDETC-CIE 2003; 923-930https://doi.org/10.1115/DETC2003/PTG-48113
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Torque , Adhesives , Coatings , Helical gears , Lubrication , Stress , Testing , Thin films , Tribology
Increased Surface Fatigue Lives of Spur Gears by Application of a Coating
Timothy L. Krantz, Clark V. Cooper, Dennis P. Townsend, Bruce D. Hansen
IDETC-CIE 2003; 931-939https://doi.org/10.1115/DETC2003/PTG-48114
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Coatings , Fatigue , Gears , Spur gears
Windage Losses in High Speed Gears: Preliminary Experimental and Theoretical Results
Y. Diab, F. Ville, C. Changenet, P. Velex
IDETC-CIE 2003; 941-947https://doi.org/10.1115/DETC2003/PTG-48115
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Engines , Friction , Lubricants , Lubrication , Motors , Rotors , Dimensional analysis , Disks , Flow (Dynamics)
Preliminary Comparison of Experimental and Analytical Efficiency Results of High-Speed Helical Gear Trains
Robert F. Handschuh, Charles J. Kilmain
IDETC-CIE 2003; 949-955https://doi.org/10.1115/DETC2003/PTG-48116
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Helical gears , Trains , Stress
Pressure Measurement of Ambient Air in the Root Space of Helical Gears for the Purpose of Understanding Fluid Flow to Improve Lubrication Efficiency
Haruo Houjoh, Shun-ichi Ohshima, Shigeki Matsumura, Yasuhiro Yumia, Keiji Itoh
IDETC-CIE 2003; 957-964https://doi.org/10.1115/DETC2003/PTG-48117
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Fluid dynamics , Helical gears , Lubrication , Pressure , Pressure measurement , Lubricants , Cooling , Axial flow , Centrifugal force , Drops
Determining Power Losses in Helical Gear Mesh: Case Study
Petra Heingartner, David Mba
IDETC-CIE 2003; 965-970https://doi.org/10.1115/DETC2003/PTG-48118
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Helical gears , Machinery , Energy consumption , Rolling friction , Stress
Improving the Characteristics of Gear Pumps: Part A — Discharge
Ahmed M. M. El-Bahloul, Yasser Z. R. Ali
IDETC-CIE 2003; 971-987https://doi.org/10.1115/DETC2003/PTG-48119
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gear pumps , Pressure , Gears , Helical gears , Pumps , Computer software , Curve fitting , Geometry
Improving the Characteristics of Gear Pumps: Part B — Pressure
Ahmed M. M. El-Bahloul, Yasser Z. R. Ali
IDETC-CIE 2003; 989-1001https://doi.org/10.1115/DETC2003/PTG-48120
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gear pumps , Pressure , Gears , Pumps , Computer software , Curve fitting , Geometry , Helical gears , Spur gears
Use of the Integrated Flexpin Bearing for Improving the Performance of Epicyclical Gear Systems
Gerald P. Fox, Eric Jallat
IDETC-CIE 2003; 1003-1011https://doi.org/10.1115/DETC2003/PTG-48121
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Bearings , Gears , Mechanical drives , Pins (Engineering) , Power density , Reliability , Stress , Machining , Planetary gears , Probability
An Analysis of a Frictional Coupling Mechanism in Rolling Variators
S. A. Lukowski, M. E. Momot, L. A. Medeksza
IDETC-CIE 2003; 1013-1022https://doi.org/10.1115/DETC2003/PTG-48122
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Design , Drilling , Friction , Performance characterization
Utilization of Powdered Metal and Shot Peening Residual Stress to Maximize Cost and Performance Benefit of High Load Gearing
David J. Breuer
IDETC-CIE 2003; 1023-1027https://doi.org/10.1115/DETC2003/PTG-48123
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Density , Fatigue , Metal powders , Shot peening , Stress
Effect of Superfinishing on Scuffing Resistance
Lane W. Winkelmann, Mark D. Michaud, Ray W. Snidle, Mark P. Alanou
IDETC-CIE 2003; 1029-1034https://doi.org/10.1115/DETC2003/PTG-48124
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Ceramics , Density , Disks , Finishes , Finishing , Friction , Gears , Temperature , Testing
The Influence of Additive Chemistry on Gear Micropitting
B. M. O’Connor
IDETC-CIE 2003; 1035-1049https://doi.org/10.1115/DETC2003/PTG-48125
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Chemistry , Gears , Wear
TriLab: A Tool for Simulating Tribological Systems
Niclas Stro¨mberg
IDETC-CIE 2003; 1051-1056https://doi.org/10.1115/DETC2003/PTG-48126
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Tribology , Contact dynamics , Contact mechanics , Displacement , Finite element analysis , Friction , Momentum , Rolling contact , Structural dynamics , Wear
Analytical and Test Evaluation of Planetary Gear Train Efficiency (Torque Related Losses) With Multiple Power Flow Arrangements
Joseph Y. Chen, James B. Borgerson
IDETC-CIE 2003; 1057-1065https://doi.org/10.1115/DETC2003/PTG-48127
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Flow (Dynamics) , Planetary gears , Torque , Trains , Circuits , Computation , Gear trains , Hardware
Gear Surface Temperature Monitoring
Yi Jia, Pablo D. Quinones
IDETC-CIE 2003; 1067-1071https://doi.org/10.1115/DETC2003/PTG-48128
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Temperature , Gear teeth , Thermocouples , Computers , Data acquisition systems , Heating , Sensors , Spur gears , Stress
Radio Telemeter for Gear Bulk Temperature Measurement
Yi Jia, Edwar Romero
IDETC-CIE 2003; 1073-1077https://doi.org/10.1115/DETC2003/PTG-48129
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Gears , Temperature measurement , Temperature , Capacitors , Calibration , Circuits , Inductors , Photolithography , Surface mount components
Power Loss of Spur Gear Drive Lubricated With Traction Oil
Kiyotaka Ikejo, Kazuteru Nagamura
IDETC-CIE 2003; 1079-1084https://doi.org/10.1115/DETC2003/PTG-48130
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Spur gears , Traction , Gear teeth , Lubrication , Mechanical drives , Temperature , Electrical resistance , Friction , Gears , Oils
Determination of Efficiency (Torque Related Losses) in Planetary Gearsets: Generalized Theory for Simple and Compound Gearsets
Raymond J. Haka
IDETC-CIE 2003; 1085-1097https://doi.org/10.1115/DETC2003/PTG-48131
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Torque , Mathematics , Planetary gears
Nonlinear Dynamic Modelling of Gear-Shaft-Disk-Bearing Systems Using Finite Elements and Describing Functions
Rafiq Maliha, Can U. Dog˘ruer, H. Nevzat O¨zgu¨ven
IDETC-CIE 2003; 1099-1108https://doi.org/10.1115/DETC2003/PTG-48848
View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text
PDF
Topics: Bearings , Disks , Dynamic modeling , Finite element analysis , Gears , Rotordynamics
All Years

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept