Topics: Finite element methods , Gear teeth , Stress analysis (Engineering) , Stress , Dimensional analysis , Finite element analysis , Numerical analysis , Stress concentration , Surface roughness

Comparison of Web Stress Concentration Factors and Safety Margins for a Thin Webbed Spur Gear Subjected to Static and Cyclic Loading Conditions

Paolo Clerici, Ambrogio Girotti, Alessandro Perazzolo

IDETC-CIE 1992; 53-58doi:https://doi.org/10.1115/DETC1992-0007

Abstracts

View Article

PDF

Topics: Safety , Spur gears , Stress concentration , Gears , Stress , Cycles , Dimensions , Fatigue , Finite element methods , Finite element model

Gear Tooth Stress Measurements of Two Helicopter Planetary Stages

Timothy L. Krantz

IDETC-CIE 1992; 59-66doi:https://doi.org/10.1115/DETC1992-0008

Abstracts

View Article

PDF

Topics: Gear teeth , Stress , Sun gears , Design , Gears , Analytical methods , Army , Databases , NASA , Rotors

Gear Manufacturing I

A Study on the Hourglass Worm Gearing Manufactured by a Pinion Cutter

Minoru Maki, Sakae Nagashima, Akiyo Horiuchi

IDETC-CIE 1992; 67-72doi:https://doi.org/10.1115/DETC1992-0009

Abstracts

View Article

PDF

Topics: Cutting , Worm gears

Characteristics of a Modified Double Enveloping Worm Gear Drive

Vilmos Simon

IDETC-CIE 1992; 73-79doi:https://doi.org/10.1115/DETC1992-0010

Abstracts

View Article

PDF

Topics: Worm gears , Gear teeth , Cutting , Lubrication , Performance characterization , Stress

New Design of Production Type CNC Hobbing Machine and its Gear Cutting Performance

H. Yagishita, T. Iizuka

IDETC-CIE 1992; 81-87doi:https://doi.org/10.1115/DETC1992-0011

Abstracts

View Article

PDF

Topics: Computer numerical control machine tools , Cutting , Design , Gears , Machinery , Errors , Machining , Spur gears , Stiffness , Automobiles

A Study on a High-Speed NC Gear Grinding Machine Using Screw-Shaped CBN Wheel

T. Emura, L. Wang, A. Arakawa

IDETC-CIE 1992; 89-96doi:https://doi.org/10.1115/DETC1992-0012

Abstracts

View Article

PDF

Topics: Gears , Grinding equipment , Screws , Wheels , Grinding wheels , Grinding , Magnetic heads , Dampers , Electromagnetic induction , Sensors

A Generalized Kinematic for Calculating and Evaluating Surface Geometry of Gears and Cutting Tools

J. Grill, K. H. Hirschmann, G. Lechner

IDETC-CIE 1992; 97-103doi:https://doi.org/10.1115/DETC1992-0013

Abstracts

View Article

PDF

Topics: Cutting tools , Gears , Geometry , Kinematics , Cutting , Grinding , Screws

Gear Dynamics II

The Stress Intensity Factor and Stiffness for a Cracked Spur Gear Tooth

S. R. Daniewicz, J. A. Collins, Donald R. Houser

IDETC-CIE 1992; 105-116doi:https://doi.org/10.1115/DETC1992-0014

Abstracts

View Article

PDF

Topics: Spur gears , Stiffness , Stress , Gear teeth , Gears , Elasticity , Fatigue , Fatigue cracks , Fracture mechanics , Noise (Sound)

Dynamic Analysis of a Planetary Gear System

Mark G. Donley, Glen C. Steyer

IDETC-CIE 1992; 117-127doi:https://doi.org/10.1115/DETC1992-0015

Abstracts

View Article

PDF

Topics: Dynamic analysis , Planetary gears , Errors , Gears , System dynamics , Dynamic response , Design , Gear trains , Modeling , Noise (Sound)

Computational Issues Associated With Gear Rattle Analysis: Part I — Problem Formulation

C. Padmanabhan, T. E. Rook, Rajendra Singh

IDETC-CIE 1992; 129-136doi:https://doi.org/10.1115/DETC1992-0016

Abstracts

View Article

PDF

Topics: Gears , Stiffness

A Comparative Study of Selected Gear Mesh Interface Dynamic Models

G. Wesley Blankenship, Rajendra Singh

IDETC-CIE 1992; 137-146doi:https://doi.org/10.1115/DETC1992-0017

Abstracts

View Article

PDF

Topics: Dynamic models , Gears , Errors , Excitation , Modeling , Stiffness , Dynamic analysis , Dynamic modeling , Dynamics (Mechanics) , Mechanical drives

Gear Geometry I

The Calculation of Contact Deformation for Double Circular-Arc Gears

Zhang Tingjian

IDETC-CIE 1992; 147-151doi:https://doi.org/10.1115/DETC1992-0018

Abstracts

View Article

PDF

Topics: Deformation , Gears , Contact mechanics , Dimensions , Elasticity , Gear teeth , Stiffness , Stress , Surface roughness , Vickers hardness testing

A Study on Hourglass-Worm Gearings Designed to Concentrate Surface Normals: Design for Worm Gearings With a Large Lead Angle

Hiroshi Gunbara, Shigeyuki Shimachi, Tohru Kobayashi, Hiroshi Kawada

IDETC-CIE 1992; 153-159doi:https://doi.org/10.1115/DETC1992-0019

Abstracts

View Article

PDF

Topics: Design , Worm gears , Deformation , Displacement , Gear teeth , Gears , Stress , Wheels

Derivation of the Explicit Solution of the Inverse Involute Function and its Applications

Harry Hui Cheng

IDETC-CIE 1992; 161-168doi:https://doi.org/10.1115/DETC1992-0020

Abstracts

View Article

PDF

Topics: Computation , Design , Errors , Gears , Geometry , Splines

Reconsideration of the LogiX Gear Using a General Mathematical Model of Composite Gear Profiles

Y. C. Tsai, H. L. Chang

IDETC-CIE 1992; 169-176doi:https://doi.org/10.1115/DETC1992-0021

Abstracts

View Article

PDF

Topics: Composite materials , Gears , Pressure , Geometry

Laser Holographic Measurement of Tooth Flank Form of Cylindrical Involute Gear: Part 1 — Principle and Measurement of Spur Gear

A. Kubo, H. Fujio, S. Tochimoto, T. Honda, S. Saitoh, M. Suzuki

IDETC-CIE 1992; 177-183doi:https://doi.org/10.1115/DETC1992-0022

Abstracts

View Article

PDF

Topics: Gears , Lasers , Spur gears

Laser Holographic Measurement of Tooth Flank Form of Cylindrical Involute Gear: Part 2 — For Helical Gear Tooth

H. Fujio, A. Kubo, S. Tochimoto, H. Hanaki, S. Saitoh, M. Suzuki

IDETC-CIE 1992; 185-191doi:https://doi.org/10.1115/DETC1992-0023

Abstracts

View Article

PDF

Topics: Gears , Helical gears , Holography , Interferometry , Lasers

Gear Manufacturing II

Minimization of Deviations of Gear Real Tooth Surfaces Determined by Coordinate Measurements

F. L. Litvin, C. Kuan, J.-C. Wang, Robert F. Handschuh, J. Masseth, N. Maruyama

IDETC-CIE 1992; 193-200doi:https://doi.org/10.1115/DETC1992-0024

Abstracts

View Article

PDF

Topics: Gears , Machine tools , Manufacturing , Spiral bevel gears

Pitting Resistance and Bending Strength of Bevel and Hypoid Gear Teeth

B.-R. Höhn, H. Winter, K. Michaelis, F. Vollhüter

IDETC-CIE 1992; 201-208doi:https://doi.org/10.1115/DETC1992-0025

Abstracts

View Article

PDF

Topics: Bending strength , Spiral bevel gears , Stress , Bevel gears , Computational methods , Gears , Load bearing capacity , Pressure

Tooth Cutting Method of Face Gear by Using CNC-Hobbing Machine

Harumi Ishii, Shigeyoshi Nagata

IDETC-CIE 1992; 209-214doi:https://doi.org/10.1115/DETC1992-0026

Abstracts

View Article

PDF

Topics: Computer numerical control machine tools , Cutting , Gears , Machinery , Surface roughness

A Research on Bevel Gear Hobbing

Shigeyoshi Nagata, Tsutomu Komori

IDETC-CIE 1992; 215-220doi:https://doi.org/10.1115/DETC1992-0027

Abstracts

View Article

PDF

Topics: Bevel gears , Cutting , Gears , Machinery , Blades , Computer numerical control machine tools , Design , Machine tools , Surface roughness , Theoretical analysis

Kinematical Optimization of Spiral Bevel Gears

Zhang-Hua Fong, Chung-Biau Tsay

IDETC-CIE 1992; 221-228doi:https://doi.org/10.1115/DETC1992-0028

Abstracts

View Article

PDF

Topics: Optimization , Spiral bevel gears , Machinery , Errors , Kinematics , Manufacturing , Generators , Geometry , Optimization algorithms , Sensitivity analysis

Gear Transmission

The Generating Space for Parabolic Motion Error Spiral Bevel Gears Cut by the Gleason Method

Claude Gosselin, Louis Cloutier

IDETC-CIE 1992; 229-235doi:https://doi.org/10.1115/DETC1992-0029

Abstracts

View Article

PDF

Topics: Errors , Spiral bevel gears , Machinery , Gears , Stress , Deflection , Deformation , Vibration , Computer-aided design , Gear teeth

Computer Simulation of Torsional Waves in a Single Gear Transmission

A. Mioduchowski, W. Nadolski

IDETC-CIE 1992; 237-247doi:https://doi.org/10.1115/DETC1992-0030

Abstracts

View Article

PDF

Topics: Computer simulation , Gears , Waves , Elastic waves , Simulation

Dynamics of a Truck Gearbox

J. Perret-Liaudet, J. Sabot

IDETC-CIE 1992; 249-258doi:https://doi.org/10.1115/DETC1992-0031

Abstracts

View Article

PDF

Topics: Dynamics (Mechanics) , Mechanical drives , Trucks , Gears , Computer simulation , Errors , Stiffness , Bearings , Dynamic modeling , Equations of motion

Transmission Analysis: Automatic Derivation of Relationships

Anders Hedman

IDETC-CIE 1992; 259-266doi:https://doi.org/10.1115/DETC1992-0032

Abstracts

View Article

PDF

Topics: Algebra , Algorithms , Computer software , Computer-aided engineering , Errors , Flow (Dynamics) , Gears , Kinematics , Mechanical drives , Planetary gears

Application of Face-Gear Drives in Helicopter Transmissions

F. L. Litvin, J.-C. Wang, R. B. Bossler, Jr., Y.-J. D. Chen, G. Heath, David G. Lewicki

IDETC-CIE 1992; 267-274doi:https://doi.org/10.1115/DETC1992-0033

Abstracts

View Article

PDF

Topics: Gears , Design , Stiffness , Stress , Torque , Bearings , Errors , Geometry , Weight (Mass)

Gear Lubrication and Wear I

Effect of Lubricant Jet Location on Spiral Bevel Gear Operating Temperatures

Robert F. Handschuh

IDETC-CIE 1992; 275-282doi:https://doi.org/10.1115/DETC1992-0034

Abstracts

View Article

PDF

Topics: Lubricants , Operating temperature , Spiral bevel gears , Temperature , Gears , Aircraft , Flow (Dynamics) , Microscopes , Pressure , Test facilities

Experimental Investigation of Flowrate Irregularity in Rotary Gear Pumps

G. Mimmi

IDETC-CIE 1992; 283-289doi:https://doi.org/10.1115/DETC1992-0035

Abstracts

View Article

PDF

Topics: Gear pumps , Flow (Dynamics) , Fluids , Pipes , Plates (structures) , Probes , Pumps , Wedges

Full-Scale Transmission Testing to Evaluate Advanced Lubricants

David G. Lewicki, Harry J. Decker, John T. Shimski

IDETC-CIE 1992; 291-297doi:https://doi.org/10.1115/DETC1992-0036

Abstracts

View Article

PDF

Topics: Lubricants , Testing , Bearings , Lubrication , NASA , Navy , Spiral bevel gears , Sun gears , Army , Failure

Load Distribution Analysis of Journal Bearings Operating Under Mixed Lubrication Conditions

A. Ramamohana Rao, P. V. Mohanram

IDETC-CIE 1992; 299-306doi:https://doi.org/10.1115/DETC1992-0037

Abstracts

View Article

PDF

Topics: Journal bearings , Lubrication , Stress , Wear , Algorithms , Bearings , Computation , Fluid films , Lubricants

Experimental Investigation of Equilibrium Loads in a Planetary Reducer by Oil Film Calculations

Liu Weiqiang

IDETC-CIE 1992; 307-310doi:https://doi.org/10.1115/DETC1992-0038

Abstracts

View Article

PDF

Topics: Equilibrium (Physics) , Stress

Gear Belts and Chains

Belt Vibration Consideration Moving Contact and Parametric Excitation

M. G. Yue

IDETC-CIE 1992; 311-318doi:https://doi.org/10.1115/DETC1992-0039

Abstracts

View Article

PDF

Topics: Belts , Excitation , Vibration , Pulleys , Tension , Automotive industry , Engines , Oscillations , Resonance

A Discrete Analysis of Metal-V Belt Drive

A. Karam, D. Play

IDETC-CIE 1992; 319-327doi:https://doi.org/10.1115/DETC1992-0040

Abstracts

View Article

PDF

Topics: Belts , Metals , Pulleys , Compression , Equilibrium (Physics) , Geometry , Tension , Computer software , Flanges , Friction

Maximum Transmission Efficiency of a Steel Belt Continuously Variable Transmission

M. Guebeli, J. D. Micklem, C. R. Burrows

IDETC-CIE 1992; 329-334doi:https://doi.org/10.1115/DETC1992-0041

Abstracts

View Article

PDF

Topics: Belts , Steel , Die cutting , Displacement , Dynamics (Mechanics) , Hydraulic pumps , Pumps , Shear stress , Shearing (Deformation) , Traction

Belt Slip: A Unified Approach

Göran Gerbert

IDETC-CIE 1992; 335-342doi:https://doi.org/10.1115/DETC1992-0042

Abstracts

View Article

PDF

Topics: Belts , V-belts , Creep , Pulleys , Shear (Mechanics) , Tension , Deflection

A Closeness Degree Method for Multi-Objective Optimization of Belt Transmission

Lin Qun, Wu Meijuan

IDETC-CIE 1992; 343-346doi:https://doi.org/10.1115/DETC1992-0043

Abstracts

View Article

PDF

Topics: Belts , Pareto optimization , Design

Gear Dynamics III

Dynamics of a Split Torque Helicopter Transmission

Majid Rashidi, Timothy L. Krantz

IDETC-CIE 1992; 347-358doi:https://doi.org/10.1115/DETC1992-0044

Abstracts

View Article

PDF

Topics: Dynamics (Mechanics) , Torque , Design , Gears , Stiffness , Stress , Thrust , Bearings , Errors , Gear trains

Computer Simulation Program of Dynamic Analysis for Planetary Transmission

Mao Ming, Cheng Ruiting

IDETC-CIE 1992; 359-363doi:https://doi.org/10.1115/DETC1992-0045

Abstracts

View Article

PDF

Topics: Computer simulation , Dynamic analysis , Degrees of freedom , Equations of motion , Transients (Dynamics)

Dynamic Analysis of a Multi-Mesh Helical Gear Train

Ahmet Kahraman

IDETC-CIE 1992; 365-373doi:https://doi.org/10.1115/DETC1992-0046

Abstracts

View Article

PDF

Topics: Dynamic analysis , Helical gears , Trains , Gears , Gear trains , Bearings , Dynamic models , Errors , Excitation

Effects of Assembly and Manufacturing Errors on Transmission Error of Planetary Gears

Takeshi Ishida, Teruaki Hidaka

IDETC-CIE 1992; 375-381doi:https://doi.org/10.1115/DETC1992-0047

Abstracts

View Article

PDF

Topics: Errors , Manufacturing , Planetary gears , Gears , Sun gears , Displacement , Robots , Degrees of freedom , Disks

Gear Design II

Optimal Design of Compact Spur Gear Reductions

M. Savage, S. B. Lattime, J. A. Kimmel, H. H. Coe

IDETC-CIE 1992; 383-390doi:https://doi.org/10.1115/DETC1992-0048

Abstracts

View Article

PDF

Topics: Design , Spur gears , Bearings , Optimization , Gears , Algorithms , Composite materials , Polynomials , Weight (Mass)

Computer-Aided Optimal Gear Design

G. C. Andrews, J. D. Argent

IDETC-CIE 1992; 391-396doi:https://doi.org/10.1115/DETC1992-0049

Abstracts

View Article

PDF

Topics: Computer-aided engineering , Design , Gears , Bending strength , Geometry , Materials properties , Optimization , Spur gears , Stress

Analysis of an Eight Speed Gear Train Using a Narrowing Iterative Step Algorithm

M. O. M. Osman, R. V. Dukkipati, V. Siva Prasad

IDETC-CIE 1992; 397-402doi:https://doi.org/10.1115/DETC1992-0050

Abstracts

View Article

PDF

Topics: Algorithms , Gear trains , Kinematics , Algebra , Composite materials , Computers , Design , Gears , Optimization , Unified field theories

A Group Theory for Composite Gear Trains Employing Three-Shafts

V. Siva Prasad, R. V. Dukkipati, M. O. M. Osman

IDETC-CIE 1992; 403-406doi:https://doi.org/10.1115/DETC1992-0051

Abstracts

View Article

PDF

Topics: Composite materials , Design , Gear trains , Gears , Visualization

Gear Manufacturing III

Effect of Cutter Performance on Finished Tooth Form in Gear Shaving

I. Moriwaki, M. Fujita

IDETC-CIE 1992; 407-413doi:https://doi.org/10.1115/DETC1992-0052

Abstracts

View Article

PDF

Topics: Gears , Cutting , Computer simulation , Simulation , Design , Errors , Pressure , Reliability

Limiting Conditions in Gear Shaping With Allowance for Trimming

K. Sankaranarayanasamy, M. S. Shunmugam

IDETC-CIE 1992; 415-422doi:https://doi.org/10.1115/DETC1992-0053

Abstracts

View Article

PDF

Topics: Clearances (Engineering) , Gears

Research on Gear Cutter Tooth Profile for Semi-Topping: A Case of a Helical Gear

Y. Ariga, Shiyeyoshi Nagata

IDETC-CIE 1992; 423-429doi:https://doi.org/10.1115/DETC1992-0054

Abstracts

View Article

PDF

Topics: Gears , Helical gears , Cutting , Errors , Design , Design methodology , Gear teeth

Gear Dynamics IV

A Comparison Between Theoretical Prediction and Experimental Measurement of the Dynamic Behavior of Spur Gears

Brian Rebbechi, B. David Forrester, Fred B. Oswald, Dennis P. Townsend

IDETC-CIE 1992; 431-438doi:https://doi.org/10.1115/DETC1992-0055

Abstracts

View Article

PDF

Topics: Computers , Defense industry , Dynamics (Mechanics) , Errors , Gear teeth , Gears , NASA , Noise (Sound) , Separation (Technology) , Spur gears

Eigensolutions of Damped Torsional Systems

Yuan Mao Huang, L. G. Kon

IDETC-CIE 1992; 439-444doi:https://doi.org/10.1115/DETC1992-0056

Abstracts

View Article

PDF

Topics: Computers , Design , Disks , Trains

Dynamic Analysis of Gear Meshing Teeth Using Modified Timoshenko Beam Theory

M. Xie, F. M. L. Amirouche, M. Valco

IDETC-CIE 1992; 445-451doi:https://doi.org/10.1115/DETC1992-0057

Abstracts

View Article

PDF

Topics: Dynamic analysis , Gears , Timoshenko beam theory , Algorithms , Cantilever beams , Computer simulation , Computers , Dynamics (Mechanics) , Equations of motion , Gear teeth

The Optimum Modification of Tooth Profile for a Pair of Spur Gears to Make its Rotational Vibration Equal Zero

Yurong Cai, Teru Hayashi

IDETC-CIE 1992; 453-460doi:https://doi.org/10.1115/DETC1992-0058

Abstracts

View Article

PDF

Topics: Spur gears , Vibration , Errors , Gears , Shapes , Stiffness , Stress

Gear Design III

Tooth Contact and 3-D Stress Analysis of Involute Helical Gears

M. A. Sahir Arikan, Mustafa Tamar

IDETC-CIE 1992; 461-468doi:https://doi.org/10.1115/DETC1992-0059

Abstracts

View Article

PDF

Topics: Helical gears , Stress analysis (Engineering) , Geometry , Stress , Cutting tools , Finite element analysis , Gears , Solid modeling

Fuzzy Optimization Design on Worm Drive

Lin Qun, Zhong Wenhui, Wu Meijuan

IDETC-CIE 1992; 469-472doi:https://doi.org/10.1115/DETC1992-0060

Abstracts

View Article

PDF

Topics: Design , Optimization , Evaluation methods

Gear Belts and Chains II

Transmission Error Characteristics of a Stepping Motor Drive Timing Belt System for a Fixed and an Automatic Tensioner

Hyunsoo Kim, Hyuk Wee

IDETC-CIE 1992; 473-479doi:https://doi.org/10.1115/DETC1992-0061

Abstracts

View Article

PDF

Topics: Errors , Stepper motors , Timing belts , Torque , Belts , Pulleys , Stress , Tension

A Study of Transmission Error in Timing Belt Drives: Effect of Production Error in Polychloroprene Rubber Belt

Masanori Kagotani, Tomio Koyama, Hiroyuki Ueda

IDETC-CIE 1992; 481-487doi:https://doi.org/10.1115/DETC1992-0062

Abstracts

View Article

PDF

Topics: Belts , Errors , Neoprene rubber , Rubber , Timing belts , Tension , Cordage , Elastic moduli , Elongation , Stress

Driven Pulley Jumping of Timing Belts

Göran Gerbert

IDETC-CIE 1992; 489-496doi:https://doi.org/10.1115/DETC1992-0063

Abstracts

View Article

PDF

Topics: Pulleys , Timing belts , Belts , Stiffness , Torque , Geometry , Friction , Stress , Tension

Gear Dynamics V

Optimum Design of a Gearbox for Low Vibration

Katsumi Inoue, Dennis P. Townsend, John J. Coy

IDETC-CIE 1992; 497-504doi:https://doi.org/10.1115/DETC1992-0064

Abstracts

View Article

PDF

Topics: Design , Mechanical drives , Vibration , Finite element analysis , Eigenvalues , Modal analysis , Optimization , Shells , Computer software , Computers

Computational Issues Associated With Gear Rattle Analysis: Part II — Evaluation Criteria for Numerical Algorithms

R. C. Barlow, C. Padmanabhan, Rajendra Singh

IDETC-CIE 1992; 505-512doi:https://doi.org/10.1115/DETC1992-0065

Abstracts

View Article

PDF

Topics: Algorithms , Gears , Simulation models

An Extended Model for the Analysis of the Dynamic Behavior of Planetary Trains

A. Saada, P. Velex

IDETC-CIE 1992; 513-520doi:https://doi.org/10.1115/DETC1992-0066

Abstracts

View Article

PDF

Topics: Trains , Satellites , Gears , Architecture , Bearings , Couplings , Degrees of freedom , Finite element analysis , Helical gears , Stiffness

The Linear Approximated Equation of Vibration for a Pair of Spur Gears: Theory and Experiment

Yurong Cai, Teru Hayashi

IDETC-CIE 1992; 521-528doi:https://doi.org/10.1115/DETC1992-0067

Abstracts

View Article

PDF

Topics: Spur gears , Vibration , Errors , Gears , Nonlinear equations , Accounting , Stiffness , Stress

Gear Geometry II

A General Formula for Determining the Normal to the Path of Contact in Parallel-Axis Gearing

Chih-Hsin Chen, Yuri Wang, John R. Colbourne

IDETC-CIE 1992; 529-534doi:https://doi.org/10.1115/DETC1992-0068

Abstracts

View Article

PDF

A Globoidal-Cam Type Gearing

Tetusya Oizumi, Takashi Emura

IDETC-CIE 1992; 535-541doi:https://doi.org/10.1115/DETC1992-0069

Abstracts

View Article

PDF

Topics: Friction , Rollers , Stiffness , Torque , Wheels

Computerized Analysis of Gear Meshing Based on Coordinate Measurement Data

Vadim Kin

IDETC-CIE 1992; 543-550doi:https://doi.org/10.1115/DETC1992-0070

Abstracts

View Article

PDF

Topics: Gears , Bearings , Errors , Computer simulation , Fatigue life , Gear teeth , Inspection , Machinery , Manufacturing , Stress

Recursive Determination of Conjugate Profiles in Planar Motion With Application to Gear Design

Carlo Innocenti

IDETC-CIE 1992; 551-565doi:https://doi.org/10.1115/DETC1992-0071

Abstracts

View Article

PDF

Topics: Clearances (Engineering) , Design , Gears , Helical gears , Parametrization

Gear Couplings and Clutches

Engagement of Oil Immersed Multi-Disc Clutches

Bengt Jacobson

IDETC-CIE 1992; 567-574doi:https://doi.org/10.1115/DETC1992-0072

Abstracts

View Article

PDF

Topics: Disks , Dry friction , Friction , Torque , Pistons , Simulation , Simulation results , Springs

Composite Technology in Couplings and Shafting for Power Transmission

Thomas G. Fromknecht

IDETC-CIE 1992; 575-581doi:https://doi.org/10.1115/DETC1992-0073

Abstracts

View Article

PDF

Topics: Composite materials , Couplings , Carbon fibers , Epoxy resins , Corrosion resistance , Laminates , Tensile strength , Winding (process) , Carbon , Deflection

Gear Noise I

Gear Case Shape and Rib Distribution for Reducing Automobile Transmission Gear Noise

N. Maruyama, K. Morikawa, N. Hitomi

IDETC-CIE 1992; 583-588doi:https://doi.org/10.1115/DETC1992-0074

Abstracts

View Article

PDF

Topics: Automotive transmissions , Gears , Noise (Sound) , Shapes , Vibration , Finite element methods , Finite element model , Modal analysis , Plates (structures) , Stiffness

Silent Gear Design for Mass-Produced Gears With Scatters in Tooth Form Accuracy

T. Nonaka, A. Kubo, S. Kato, T. Ohmori

IDETC-CIE 1992; 589-595doi:https://doi.org/10.1115/DETC1992-0075

Abstracts

View Article

PDF

Topics: Design , Gears , Noise (Sound) , Shapes , Errors , Excitation , Assembly lines , Automotive transmissions , Computer-aided engineering , Machinery

A Generation Mechanism of Aerodynamic Sound of Spur Gears

Haruo Houjoh, Kiyohiko Umezawa

IDETC-CIE 1992; 597-604doi:https://doi.org/10.1115/DETC1992-0076

Abstracts

View Article

PDF

Topics: Aerodynamic noise , Spur gears , Air flow , Emissions , Space , Vibration

How to Ensure Precise Analysis of Gear Surfaces and Diagnosis of Changes During Operation

D. Mengen, M. Weck

IDETC-CIE 1992; 605-612doi:https://doi.org/10.1115/DETC1992-0077

Abstracts

View Article

PDF

Topics: Gears , Fatigue , Noise (Sound) , Electric power transmission , Emissions , Instrumentation , Maintenance , Manufacturing , Photogrammetry , Safety

Gear Lubrication and Wear II

Bearing Vibration and Oil Film Thickness in Relation to Sphericity of Bearing Steel Balls

F. Itoigawa, T. Nakamura, K. Funabashi

IDETC-CIE 1992; 613-620doi:https://doi.org/10.1115/DETC1992-0078

Abstracts

View Article

PDF

Topics: Bearing steel , Bearings , Film thickness , Vibration , Ball bearings , Errors , Shapes , Steel , Cross section (Physics) , Rupture

A Few Aspects on Lubricant Selection for Stepless Chain Coverters: Efficiency and Service Life

G. Schönnenbeck

IDETC-CIE 1992; 621-628doi:https://doi.org/10.1115/DETC1992-0079

Abstracts

View Article

PDF

Topics: Chain , Lubricants , Service life (Equipment) , Friction , Wear , Deformation , Disks , Pumps , Control systems , Fuels

Optimization of Involute Gear Tooth Profile Modification for Tooth Scoring Reduction

Prokop S'roda, Ronald L. Huston

IDETC-CIE 1992; 629-633doi:https://doi.org/10.1115/DETC1992-0080

Abstracts

View Article

PDF

Topics: Design , Gear teeth , Load bearing capacity , Lubrication , Optimization , Wear

Gear Materials I

A Study on the Shrinkage Characteristics and Dimensional Accuracy of Cast Gears

Jimmy Adjunta, Donald Houser

IDETC-CIE 1992; 635-642doi:https://doi.org/10.1115/DETC1992-0081

Abstracts

View Article

PDF

Topics: Gears , Shrinkage (Materials) , Casting , Computer numerical control machine tools , Computer software , Coordinate measuring machines , Design , Geometry , Investment casting (Process) , Investment castings

Improvement in Surface Fatigue Life of Hardened Gears by High-Intensity Shot Peening

Dennis P. Townsend

IDETC-CIE 1992; 643-649doi:https://doi.org/10.1115/DETC1992-0082

Abstracts

View Article

PDF

Topics: Fatigue life , Gears , Shot peening , Stress , Fatigue , Finishes , Vacuum , Electromagnetic induction , Heat , Lubricants

Comparative Fatigue Resistance of Fiber Reinforced Nylon 6 Gears

Giuseppe Crippa, Piermaria Davoli

IDETC-CIE 1992; 651-659doi:https://doi.org/10.1115/DETC1992-0083

Abstracts

View Article

PDF

Topics: Fatigue , Fibers , Gears , Nylon fabrics , Lubrication , Plastic gears , Cycles , Design , Fatigue life , Steel

Size Effect in Bending Strength of Carburized Gear Teeth

M. Kato, Katsumi Inoue, G. Deng, B. S. Jeong

IDETC-CIE 1992; 661-668doi:https://doi.org/10.1115/DETC1992-0084

Abstracts

View Article

PDF

Topics: Bending strength , Gear teeth , Size effect , Gears , Fatigue testing , Fracture (Materials) , Alloy steel , Carbon , Crack propagation , Fatigue life

Gear Noise II

Effect of Operating Conditions on Gearbox Noise

Fred B. Oswald, James J. Zakrajsed, Dennis P. Townsend, William Atherton, Hsiang Hsi Lin

IDETC-CIE 1992; 669-674doi:https://doi.org/10.1115/DETC1992-0085

Abstracts

View Article

PDF

Topics: Mechanical drives , Noise (Sound) , Torque , Gears , NASA , Acoustic intensity , Design , Dynamic analysis , Dynamics (Mechanics) , Gear teeth

Comparison of Analysis and Experiment for Gearbox Noise

Fred B. Oswald, A. F. Seybert, T. W. Wu, William Atherton

IDETC-CIE 1992; 675-679doi:https://doi.org/10.1115/DETC1992-0086

Abstracts

View Article

PDF

Topics: Mechanical drives , Noise (Sound) , Boundary element methods , NASA , Vibration , Acoustic intensity , Acoustics , Gears , Resonance , Spectra (Spectroscopy)

The Influence of Flank Deviations on the Vibration of a Helical Gear Pair Transmitting Light Load

Kiyohiko Umezawa, Haruo Houjoh, Shigeki Matsumura

IDETC-CIE 1992; 681-688doi:https://doi.org/10.1115/DETC1992-0087

Abstracts

View Article

PDF

Topics: Helical gears , Stress , Vibration , Deflection , Design methodology , Errors , Simulation

Gear Belts and Chains III

Mechanics of Roller Chain-Sprocket Contact: A General Modelling Stragegy

Mahn Shik Kim, Glen E. Johnson

IDETC-CIE 1992; 689-695doi:https://doi.org/10.1115/DETC1992-0088

Abstracts

View Article

PDF

Topics: Chain , Modeling , Rollers , Errors , Bushings , Manufacturing , Pressure , Roller chain , Stress , Wear

Mechanics of Roller Chain-Sprocket Contact: Observations About the Contact Phenomena and Load Distribution

Mahn Shik Kim, Glen E. Johnson

IDETC-CIE 1992; 697-702doi:https://doi.org/10.1115/DETC1992-0089

Abstracts

View Article

PDF

Topics: Chain , Rollers , Stress , Errors , Bushings , Friction , Pressure , Computer simulation , Coulombs , Manufacturing

Design and Construction of a Machine to Evaluate the Forces in Roller Chain Drives

James C. Conwell, Glen E. Johnson, S. W. Peterson

IDETC-CIE 1992; 703-709doi:https://doi.org/10.1115/DETC1992-0090

Abstracts

View Article

PDF

Topics: Construction , Design , Machinery , Roller chain , Chain , Rollers , Drive chain , Plates (structures) , Stress

Experimental Investigation of the Forces in a Link Side Plate During Normal Operation of a Roller Chain Drive

James C. Conwell, Glen E. Johnson, S. W. Peterson

IDETC-CIE 1992; 711-716doi:https://doi.org/10.1115/DETC1992-0091

Abstracts

View Article

PDF

Topics: Roller chain , Chain , Tension , Stress , Construction , Design , Fatigue , Inertia (Mechanics) , Machinery , Rollers

Experimental Investigation of the Impact Force That Occurs When a Roller Seats on the Sprocket During Normal Operation of a Roller Chain Drive

James C. Conwell, Glen E. Johnson, S. W. Peterson

IDETC-CIE 1992; 717-721doi:https://doi.org/10.1115/DETC1992-0092

Abstracts

View Article

PDF

Topics: Roller chain , Rollers , Chain , Noise (Sound) , Stress , Tension , Vibration , Wear

Modeling a Flexible-Link Power Transmission System

Maureen J. Murray, Thomas R. Canfield

IDETC-CIE 1992; 723-728doi:https://doi.org/10.1115/DETC1992-0093

Abstracts

View Article

PDF

Topics: Computer simulation , Dynamics (Mechanics) , Engineers , Modeling , Tracked vehicles

Gear Materials II

A New Method to Reduce the Polygon Effect of Chain Drives With Tensioner

Shu-Min Li

IDETC-CIE 1992; 729-731doi:https://doi.org/10.1115/DETC1992-0094

Abstracts

View Article

PDF

Topics: Chain , Construction

Surface Failure and Durability of Induction-Hardened Sintered Powder Metal Rollers and Gears With Various Hardened Depths

Akira Yoshida, Yuji Ohue, Isamu Karasuno

IDETC-CIE 1992; 733-740doi:https://doi.org/10.1115/DETC1992-0095

Abstracts

View Article

PDF

Topics: Durability , Electromagnetic induction , Failure , Gears , Metals , Rollers , Fracture (Materials) , Failure mechanisms , Shear stress , Vickers hardness testing