Abstract
The coolant may vaporize in the centrifugal pump to cause cavitation in pool-type nuclear heating reactor. Installing a jetting device at the pump suction port is an effective means of applying jetting technology to solve the problem of preventing cavitation in centrifugal pumps. In this paper, an annular multi-nozzles ejector was designed and an experimental system was constructed to test the actual supercharging performance of the device. When the high-energy fluid at the pump outlet flowed through the device, it was first mixed uniformly in the annular chamber, and then injected through the nozzles to mix with the main flow to increase the pressure of the main flow. The static pressure at the suction port of the pump increased. Accordingly, the available Net Positive Suction Head (NPSHa) of the pump increased. The test was constructed around the total flow flux through the pump invariable and the main loop flow flux invariable two schemes. The results show that when the proportion of the return flow flux was same, the greater the total flow flux through the pump, the higher the pressure increment at the pump suction port; when the proportion of the return flow flux was larger, the difference in the pressure increment corresponding to different total flow fluxes was larger. When the flow flux through the main circuit of the system was same, the pressure increment increased nonlinearly with the increase of the return flow flux. Increasing the return flow flux was beneficial to the supercharging performance of the jetting device.
