Pressurizer surge lines are essential pipeline structure in NPPs, and the thermal stratification in surge line is recognized as one of the possible cause of thermal fatigue. In this paper, a Computational Fluid Dynamic (CFD) method has been adopted to simulate temperature fluctuations on the process of temperature rising in a pressurizer surge line under rolling motion of single degree of freedom. This work focuses on a fundamental description of differences of thermal stratification between the surge line rolling around the coordinate X-axis condition and that in a static state. The Large-eddy simulation (LES) model is employed to capture the details of temperature change in surge line. Temperature distributions near the inner wall of a surge line pipe with or without swinging were monitored and compared. The temperature differences between the top and bottom of the pipe sections are employed to represent the maximum temperature differences at all the monitored sections. As the surge line swinging, the pattern of temperature distribution and the length of thermal stratification development are different from that in a static. Fluid temperature fluctuation in surge line occur periodically during the fluid temperature rising when the surge line is rotated with the X-axis, and the temperature difference between top and bottom of the surge line is reduced in the same motion mode compared with the static state.
- Nuclear Engineering Division
Numerical Simulation for Effect of Rolling Motion on Thermal Stratification in a Surge Line
- Views Icon Views
- Share Icon Share
- Search Site
Shen, YL, Lu, T, & Liu, B. "Numerical Simulation for Effect of Rolling Motion on Thermal Stratification in a Surge Line." Proceedings of the 2017 25th International Conference on Nuclear Engineering. Volume 8: Computational Fluid Dynamics (CFD) and Coupled Codes; Nuclear Education, Public Acceptance and Related Issues. Shanghai, China. July 2–6, 2017. V008T09A033. ASME. https://doi.org/10.1115/ICONE25-67026
Download citation file: