The Water Ingress Mass Analysis on Steam Generator Heat-Exchange Tube Rupture Accident of High Temperature Gas-Cooled Reactor Available to Purchase

The module high temperature gas-cooled reactor (HTGR) is an advanced reactor with high safety level. The steam generator heat-exchange tube rupture (SGTR) accident (or water ingress accident) is an important and particular accident which will result in water ingress to the primary circuit of reactor. Water ingress may, in turn, result in chemical reaction of graphite fuel and structure with water, causing release of radioactive isotopes and generation of explosive gaseous in large quantity. The analysis of SGTR is significant for verifying the inherent safety characteristics of HTGR. One of the key factors is to estimate the amount of water ingress mass which is used to evaluate the severity of the accident consequence. The 200MWe high temperature gas-cooled reactor, which is designed by the Institute of Nuclear and New Energy Technology of Tsinghua University, is selected as an example to analyze. The accident scenarios of double-ended rupture of both single and two heat-exchange tubes at the inlet and outlet of steam generator are simulated respectively by RETRAN-02. The results show that the amount of water ingress mass is related to the break location, the number of ruptured tubes (or the break size). The greater the number of ruptured tubes or the break size, the larger the amount of water ingress mass. It is important to design the draining pipe line with reasonable diameter, which should be optimized based on economy and safety considerations for preventing large water ingress to the reactor primary circuit, restricting the change rate of mechanical load on SG, and reducing the radioactive isotopes release to the secondary circuit.