Mixing in rotational micro-chamber has been carried out both experimentally and numerically with intent of improving mixing in viscous dominated microfluidics. In experiment, an enclosed chamber made of machined PMMA cut-out with a PDMS cover was set-up on the rotational platform. Different geometries of the chamber (on the order of several mm) with constant height yet different angular span 5, 10, 15, 20 deg. and radial extents 1.5 and 3 mm were used in the tests. While the two different dyes each occupying half of the chamber took a long time (e.g. nearly 40 minutes for a 20-degree span chamber with inner and outer radii, respectively, 35 and 36.5 mm and height 0.5 mm) for mixing by molecular diffusion in the chamber, faster mixing (about 2.5 minute) can be achieved under continuous acceleration and deceleration rotation with a linear rate of 25 rad/s2. The time for mixing per unit volume (Specific Mixing Time - SMT) was determined experimentally as a function of geometry. The SMT increases with increasing vorticity strength as a result of increasing size of the rotating chamber and/or increasing the magnitude of the linear acceleration and deceleration rates. Mixing is also studied by numerical simulation of the tested geometry. Comparing with the experiments, we found good agreement for the SMT between test results and numerical model for small-angled chamber while the numerical model seems to under-estimate the SMT for large-angled chamber. Further, we have also verified qualitatively in the experiment the flow pattern of the primary vortex in the radial-azimuthal plane responsible, to a large extent, for mixing in the chamber. Two approaches have been taken to observe and confirm the primary vortex being set up by continuous acceleration-and-deceleration of the chamber. The first approach adopted color tracing with two miscible dyed liquids, and the second approach used neutrally buoyant particles to trace fluid particle flow in the rotating chamber.
Skip Nav Destination
ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting
August 1–5, 2010
Montreal, Quebec, Canada
Conference Sponsors:
- Fluids Engineering Division
ISBN:
978-0-7918-5450-1
PROCEEDINGS PAPER
Experimental Investigation on Flow and Mixing in Rotating Microfluidics Available to Purchase
Wallace Woon-Fong Leung,
Wallace Woon-Fong Leung
Hong Kong Polytechnic University, Hong Kong, China
Search for other works by this author on:
Yong Ren
Yong Ren
Hong Kong Polytechnic University, Hong Kong, China
Search for other works by this author on:
Wallace Woon-Fong Leung
Hong Kong Polytechnic University, Hong Kong, China
Yong Ren
Hong Kong Polytechnic University, Hong Kong, China
Paper No:
FEDSM-ICNMM2010-31059, pp. 1313-1317; 5 pages
Published Online:
March 1, 2011
Citation
Leung, WW, & Ren, Y. "Experimental Investigation on Flow and Mixing in Rotating Microfluidics." Proceedings of the ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting. ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels: Parts A and B. Montreal, Quebec, Canada. August 1–5, 2010. pp. 1313-1317. ASME. https://doi.org/10.1115/FEDSM-ICNMM2010-31059
Download citation file:
7
Views
Related Proceedings Papers
Related Articles
A Microfluidic Device to Establish Concentration Gradients Using Reagent Density Differences
J Biomech Eng (December,2010)
Mixing Evaluation of a Passive Scaled-Up Serpentine Micromixer With Slanted Grooves
J. Fluids Eng (August,2013)
A New Experimental Technique to Simulate Secondary Erosion in Turbine Cascades
J. Turbomach (October,1986)
Related Chapters
Numerical Simulation and Analysis on Gas Turbine Static Blade Erosion Caused by Particle Flow
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine
Numerical Simulations of Tip Leakage Vortex Cavitation Flows Around a NACA0009 Hydrofoil
Proceedings of the 10th International Symposium on Cavitation (CAV2018)