The disused sealed radioactive sources including orphan sources in Lebanon, along with the growing industry of sealed radioactive sources in medical, industrial and research fields have posed a serious problem for authorities as well as users due to the lack of a national store for disused radioactive sources. Assistance from the International Atomic Energy Agency (IAEA) was requested to condition and store disused radium needles and tubes present at two facilities. The mission took place on July 25, 2001 and was organized by the IAEA in cooperation with the Lebanese Atomic Energy Commission (LAEC). Other disused radioactive sources were kept in the facilities till a safer and securer solution is provided; however orphan sources, found mainly during export control, were brought and stored temporarily in LAEC. The necessity of a safe and secure store became a must. Prior to October 2005, there was no clear legal basis for establishing such store for disused radioactive sources, until the ministerial decree no 15512 dated October 19, 2005 (related to the implementation of decree-law no 105/83) was issued which clearly stated that “The LAEC shall, in cooperation with the Ministry of Public Health, establish a practical mechanism for safe disposal of radioactive waste”. Following this, the work on inventory of disused sealed sources along with collecting orphan sources and placing them temporarily in LAEC was legally supported. Moreover, several missions were planned to repatriate category I and II sources, one of which was completed specifically in August 2009; other missions are being worked on. In 2008, a national technical cooperation project with the IAEA was launched. Under the Technical Cooperation (TC) project with reference number LEB3002, the project was entitled “Assistance in the establishment of a safe temporary national storage at the LAECfor orphan sources and radioactive waste” which cycle is 2009–2011. Under this project, a national store for radioactive sources in the third basement of LAEC is being established. The area is being reconstructed currently and will be equipped when ready under LEB3002 project. Along with this, a system for sealed disused sources management has been prepared, part of which is applied now and the rest will be applied upon the establishment of the store. This paper will cover the inventory collection process, the study for the establishment of this store, the present and prospective waste management system, and the waste acceptance criteria.
Skip Nav Destination
ASME 2010 13th International Conference on Environmental Remediation and Radioactive Waste Management
October 3–7, 2010
Tsukuba, Japan
Conference Sponsors:
- Nuclear Engineering Division and Environmental Engineering Division
ISBN:
978-0-7918-5453-2
PROCEEDINGS PAPER
Radioactive Waste Management in Lebanon
Muzna Assi
Muzna Assi
Lebanese Atomic Energy Commission, Beirut, Lebanon
Search for other works by this author on:
Muzna Assi
Lebanese Atomic Energy Commission, Beirut, Lebanon
Paper No:
ICEM2010-40058, pp. 643-651; 9 pages
Published Online:
April 5, 2011
Citation
Assi, M. "Radioactive Waste Management in Lebanon." Proceedings of the ASME 2010 13th International Conference on Environmental Remediation and Radioactive Waste Management. ASME 2010 13th International Conference on Environmental Remediation and Radioactive Waste Management, Volume 2. Tsukuba, Japan. October 3–7, 2010. pp. 643-651. ASME. https://doi.org/10.1115/ICEM2010-40058
Download citation file:
8
Views
Related Proceedings Papers
Related Articles
Review of Canadian Experience with the Fabrication of Thoria-Based Fuels for Advanced Reactors and Fuel Cycles for Long-Term Nuclear Energy Sustainability and Security
ASME J of Nuclear Rad Sci (January,0001)
Nuclear Power and Nuclear Technologies Can Benefit From Regional Implementation of Multinational Approaches
ASME J of Nuclear Rad Sci (October,2022)
No Hurry to Recycle
Mechanical Engineering (May,2006)
Related Chapters
New Generation Reactors
Energy and Power Generation Handbook: Established and Emerging Technologies
Operability and Functionality Qualification
Continuing and Changing Priorities of the ASME Boiler & Pressure Vessel Codes and Standards
Development of Nuclear Boiler and Pressure Vessels in Taiwan
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 3, Third Edition