Spectral-directional emittance measurements for cupric oxide (CuO) are presented. The data cover polar angles of zero to 84° from the surface normal, wavelengths between 1.5 and 8 μm, and temperatures between 400 and 700°C. The data were generated using a radiometric, direct emission measurement method. The oxide was grown on a very clear, smooth, and mirror-like copper surface, heated in air at 700°C until emission measurements became constant (270 hours). X-ray diffraction and EDS analyses were performed to characterize the spatial and molecular composition of the copper oxide layer. It is generally found that CuO emittance decreases with increasing polar angle, increases with increasing wavelength, and increases with increasing temperature. Spectral-directional emittance values calculated from the Fresnel equations show good agreement with the measurements up to polar angles of 72°.
Skip Nav Destination
ASME 2004 Heat Transfer/Fluids Engineering Summer Conference
July 11–15, 2004
Charlotte, North Carolina, USA
Conference Sponsors:
- Heat Transfer Division and Fluids Engineering Division
ISBN:
0-7918-4690-3
PROCEEDINGS PAPER
Spectral-Directional Emittance of CuO at High Temperatures Available to Purchase
Peter D. Jones,
Peter D. Jones
Auburn University, Auburn, AL
Search for other works by this author on:
George Teodorescu,
George Teodorescu
Auburn University, Auburn, AL
Search for other works by this author on:
Ruel A. Overfelt
Ruel A. Overfelt
Auburn University, Auburn, AL
Search for other works by this author on:
Peter D. Jones
Auburn University, Auburn, AL
George Teodorescu
Auburn University, Auburn, AL
Ruel A. Overfelt
Auburn University, Auburn, AL
Paper No:
HT-FED2004-56050, pp. 11-19; 9 pages
Published Online:
February 24, 2009
Citation
Jones, PD, Teodorescu, G, & Overfelt, RA. "Spectral-Directional Emittance of CuO at High Temperatures." Proceedings of the ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. Volume 1. Charlotte, North Carolina, USA. July 11–15, 2004. pp. 11-19. ASME. https://doi.org/10.1115/HT-FED2004-56050
Download citation file:
9
Views
Related Proceedings Papers
Related Articles
Spectral-Directional Emittance of CuO at High Temperatures
J. Heat Transfer (April,2006)
Tungsten Carbide as a Diffusion Barrier on Silicon Nitride Active- Metal-Brazed Substrates for Silicon Carbide Power Devices
J. Electron. Packag (September,2009)
Surface Heating of Metallic Mirrors in High Power Laser Cavities
J. Heat Transfer (February,1974)
Related Chapters
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Extension of the MCRT Method to Non-Diffuse, Non-Gray Enclosures
The Monte Carlo Ray-Trace Method in Radiation Heat Transfer and Applied Optics
Calorimetric Measurement of Temperature Dependent Absorption in Copper
Laser Induced Damage in Optical Materials: 1981