Computational fluid dynamics (CFD) is used to isolate the flow physics responsible for hot crossflow ingestion, a phenomenon that can cause failure of a film cooled gas turbine component. In the gas turbine industry, new compound-angle shaped hole (CASH) geometries are currently being developed to decrease the heat transfer coefficient and increase the adiabatic effectiveness on film cooled surfaces. These new CASH geometries can have unexpected flow patterns that result in hot crossflow ingestion at the film hole. This investigation examines a 15° forward-diffused cylindrical film hole injected streamwise at 35° with a compound angle of 60° (FDIFF60) and with a length-to-diameter ratio (L/D) of 4.0. Qualitative and quantitative aspects of computed results agreed well with measurements, thus lending credibility to predictions. The FDIFF60 configuration is a good representative of a typical CASH geometry, and produces flow mechanisms that are characteristic of CASH film cooling. FDIFF60 has been shown to have impressive downstream film cooling performance, while simultaneously having undesirable ingestion at the film hole. In addition to identifying the physical mechanisms driving ingestion, this paper documents the effects on ingestion of the blowing ratio, the density ratio, and the film hole Reynolds number over realistic gas turbine ranges of 0.5 to 1.88, 1.6 to 2.0, and 17,350 to 70,000, respectively. The results of this study show that hot crossflow ingestion is caused by a combination of coolant blockage at the film hole exit plane and of crossflow boundary layer vorticity that has been re-oriented streamwise by the presence of jetting coolant: Ingestion results when this re-oriented vorticity passes over the blocked region of the film hole. The density ratio and the film hole Reynolds number do not have a significant effect on ingestion over the ranges studied, but the blowing ratio has a surprising non-linear effect. Another important result of this study is that the blockage of coolant hampers convection and allows diffusion to transfer heat into the film hole even when ingestion is not present. This produces both an undesirable temperature gradient and high temperature level on the film hole wall itself. Lessons learned about the physics of ingestion are generalized to arbitrary CASH configurations. The systematic computational methodology currently used has been previously documented and has become a standard for ensuring accurate results. The methodology includes exact modeling of flow physics, proper modeling of the geometry including the crossflow, plenum, and film hole regions, a high quality mesh for grid independent results, second order discretization, and the two-equation k-ε turbulence model with generalized wall functions. The steady, Reynolds-averaged Navier-Stokes equations are solved using a fully-elliptical and fully-implicit pressure-correction solver with multi-block unstructured and adaptive grid capability and with multi-grid convergence acceleration.
Skip Nav Destination
ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition
June 2–5, 1998
Stockholm, Sweden
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-7865-1
Article Contents
PROCEEDINGS PAPER
Physics of Hot Crossflow Ingestion in Film Cooling Free
E. Lee McGrath,
E. Lee McGrath
Clemson University, Clemson, SC
Search for other works by this author on:
James H. Leylek
James H. Leylek
Clemson University, Clemson, SC
Search for other works by this author on:
E. Lee McGrath
Clemson University, Clemson, SC
James H. Leylek
Clemson University, Clemson, SC
Paper No:
98-GT-191, V004T09A042; 12 pages
Published Online:
December 23, 2014
Citation
McGrath, EL, & Leylek, JH. "Physics of Hot Crossflow Ingestion in Film Cooling." Proceedings of the ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration. Stockholm, Sweden. June 2–5, 1998. V004T09A042. ASME. https://doi.org/10.1115/98-GT-191
Download citation file:
211
Views
Related Articles
Physics of Hot Crossflow Ingestion in Film Cooling
J. Turbomach (July,1999)
A Detailed Analysis of Film Cooling Physics: Part IV— Compound-Angle Injection With Shaped Holes
J. Turbomach (January,2000)
A Detailed Analysis of Film Cooling Physics: Part III— Streamwise Injection With Shaped Holes
J. Turbomach (January,2000)
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Studies Performed
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)