Large gas turbine combustion chambers, being arranged outside of the unit, exhibit quite a lot of advantages with respect to combustion. Moreover, they are characterized by a long life of all components. Thus, in case of such gas turbine units the maintenance and inspection intervals are relatively large being not determined by the combustion chamber or combustion chamber components. There are not many failures. They may easily be recognized at their initial stage and can be eliminated quickly as the inside is accessible via a manhole. This in turn has a positive effect on overall maintenance and service cost. Besides, this easy accessibility allows for a direct examination of the turbine inner casing and the first turbine stages in case of maintenanced works. Experiences are based on the operation of more than 100 gas turbines of such a kind, whereby several have been run at peak load with more than 5000 starts, others at base load with more than 100,000 operating hours.
Skip Nav Destination
ASME 1982 International Gas Turbine Conference and Exhibit
April 18–22, 1982
London, England
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-7958-0
PROCEEDINGS PAPER
Experience With Large Gas Turbine Combustion Chambers Free
A. Lienert,
A. Lienert
Gas Turbine Technology, West Germany
Search for other works by this author on:
O. Schmoch
O. Schmoch
Gas Turbine Technology, West Germany
Search for other works by this author on:
A. Lienert
Gas Turbine Technology, West Germany
O. Schmoch
Gas Turbine Technology, West Germany
Paper No:
82-GT-57, V003T06A014; 8 pages
Published Online:
April 15, 2015
Citation
Lienert, A, & Schmoch, O. "Experience With Large Gas Turbine Combustion Chambers." Proceedings of the ASME 1982 International Gas Turbine Conference and Exhibit. Volume 3: Coal, Biomass and Alternative Fuels; Combustion and Fuels; Oil and Gas Applications; Cycle Innovations. London, England. April 18–22, 1982. V003T06A014. ASME. https://doi.org/10.1115/82-GT-57
Download citation file:
886
Views
Related Proceedings Papers
Related Articles
Crude Oil Burning Experience in MS5001P Gas Turbines
J. Eng. Gas Turbines Power (October,1984)
Combustion Instabilities in Industrial Gas Turbines—Measurements on Operating Plant and Thermoacoustic Modeling
J. Eng. Gas Turbines Power (July,2000)
Performance of a Reduced NO x Diffusion Flame Combustor for the MS5002 Gas Turbine
J. Eng. Gas Turbines Power (April,2000)
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Subsection NG—Core Support Structures
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition
Inspection and Maintenance of Ageing Concrete Oil and Gas Structures on the Norwegian Continental Shelf
Ageing and Life Extension of Offshore Facilities