Abstract
Among the list of advanced technologies required to support the energy industry’s novel Supercritical Carbon Dioxide (sCO2) power cycle is the need for a robust and responsive control system. Recent testing has been performed on a 2.5 MWe sCO2 compressor operating near the critical temperature (31C) and critical pressure (73.8 bar), developed with funding from the US DOE Apollo program and industry partners. While sCO2 compression has been performed before, operating near the critical point has many key benefits for power generation with its low head requirements and smaller physical footprint. However, with these benefits come unique challenges, namely controlling this system to steady-state operating conditions. Operating just above the critical point (35°C [95°F] and 8.5 MPa [1,233 psi]) there can be large and rapid swings in density produced by subtle changes in temperature, leading to increased difficulty in maintaining adequate control of the compressor system. This means that proper functionality of the entire compressor system, and its usefulness to a closed loop recompression Brayton power cycle, is largely dependent on variables such as thermal sources, precision and response time of the instrumentation, proper heat soaking, and strategic filling and venting sequences. While other papers have discussed the science behind and performance of sCO2 compressors, this paper will discuss the challenges associated with steady-state control of the compressor at or near operating conditions, how the fill process was executed for optimal startup, and changes that occurred while idling during trip events.
