Abstract
Optimizing the aero-thermal performance of the combustor-turbine interface is an important factor in enhancing the efficiency of heavy-duty gas turbines. Also, it is a key requirement to fulfill the lifetime in this hottest area of the gas turbine. Typically transition pieces of can combustors induce a highly non-uniform swirling flow at the turbine inlet. In order to better understand the impact of the non-uniform combustor flow at the first stage vanes, a combined experimental and numerical study was carried out.
The experimental facility consisted of a high speed linear cascade with four vane passages, including an upstream transition piece, which was representative of a heavy duty gas turbine can combustor-turbine interface geometry. The experiments were conducted at engine representative Mach numbers and film cooling effectiveness measurements were performed at three different blowing ratios.
CFD RANS simulations were undertaken using a commercial flow solver. The numerical model was first validated with the experimental data, using inlet traverse 5-hole probe measurements, pressure taps along the airfoil perimeter and oil flow visualization results.
The investigation shows that the position of the vane relative to the combustor transition piece has a significant impact on the vane aerodynamics and also film cooling behavior. This understanding was key to a robust first vane aerothermal design of the GT36.
