The flow field in the passage of a high pressure gas turbine is quite complex, involving strong secondary flows, transverse pressure gradients and strong streamwise acceleration. This complexity may have an adverse effect on cooling of the hub endwall, which is subjected to high thermal loading due to the flat combustor exit temperature profile of modern low-NOx systems. Therefore, given material limitations, better cooling management techniques that can be included with certainty in new gas turbine designs are needed. In the present study, film cooling has been investigated experimentally in a stationary linear cascade. The flow is representative of a high pressure gas turbine rotor with combustor liner coolant introduced to the approach flow. Focus is on the endwall axisymmetric contouring and the cooling effect of leakage flow bled from the compressor through the stator-rotor disc cavity. Two endwall contours, ‘shark nose’ (gradual slope over a larger distance) and ‘dolphin nose’ (steep slope over a shorter distance), are considered and comparison is made under conditions of three mass flow rates (MFR) of leakage, 0.5%, 1.0% and 1.5% of the approach flow rate. The performance of both endwall contours is compared at different streamwise locations in terms of adiabatic effectiveness values over the endwall. This study gives enhanced insight into the physics of coolant flow mixing, migration and subsequent coverage over the endwall. The results show the cooling effects of the contoured shapes over a range of leakage flow rates in the strong secondary flow environment. It is found that the leakage flow plays a crucial role in enhancing coolant coverage over the endwall. To add to our knowledge of mixing effects, detailed thermal field data are taken in the leakage flow discharge region. Doing so helps explain the behavior of the flow as it is ejected into the passage and interacts with the mainstream flow.
Skip Nav Destination
ASME Turbo Expo 2015: Turbine Technical Conference and Exposition
June 15–19, 2015
Montreal, Quebec, Canada
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-5672-7
PROCEEDINGS PAPER
Flow Migration and Mixing in a High Pressure Turbine Rotor Passage With Axisymmetrically Contoured Endwall and Leakage Flow Available to Purchase
Reema Saxena,
Reema Saxena
University of Minnesota, Twin Cities, Minneapolis, MN
Search for other works by this author on:
Arya Ayaskanta,
Arya Ayaskanta
University of Minnesota, Twin Cities, Minneapolis, MN
Search for other works by this author on:
Terrence W. Simon,
Terrence W. Simon
University of Minnesota, Twin Cities, Minneapolis, MN
Search for other works by this author on:
Hee-Koo Moon,
Hee-Koo Moon
Solar Turbines Incorporated, San Diego, CA
Search for other works by this author on:
Luzeng J. Zhang
Luzeng J. Zhang
Solar Turbines Incorporated, San Diego, CA
Search for other works by this author on:
Reema Saxena
University of Minnesota, Twin Cities, Minneapolis, MN
Arya Ayaskanta
University of Minnesota, Twin Cities, Minneapolis, MN
Terrence W. Simon
University of Minnesota, Twin Cities, Minneapolis, MN
Hee-Koo Moon
Solar Turbines Incorporated, San Diego, CA
Luzeng J. Zhang
Solar Turbines Incorporated, San Diego, CA
Paper No:
GT2015-44000, V05BT12A051; 11 pages
Published Online:
August 12, 2015
Citation
Saxena, R, Ayaskanta, A, Simon, TW, Moon, H, & Zhang, LJ. "Flow Migration and Mixing in a High Pressure Turbine Rotor Passage With Axisymmetrically Contoured Endwall and Leakage Flow." Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. Volume 5B: Heat Transfer. Montreal, Quebec, Canada. June 15–19, 2015. V05BT12A051. ASME. https://doi.org/10.1115/GT2015-44000
Download citation file:
33
Views
Related Proceedings Papers
Related Articles
Film-Cooling Effectiveness on a Rotating Turbine Platform Using Pressure Sensitive Paint Technique
J. Turbomach (October,2010)
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential