Film cooling performance of a sister hole was investigated in a flat plate model by applying Thermochromic Liquid Crystal (TLC) technique under the stationary and rotating conditions. The flat plate model is installed in the test section. The sister hole include one main hole and two additional side holes with the smaller diameter in the spanwise direction. The diameter of the main hole is 4 mm and the injection angle is 30°. The density ratio of coolant to mainstream is 1.05. The Reynolds number (ReD) based on the velocity of mainstream and the diameter of the main hole are 2300, 3400 and 4500. Four rotational speeds of 200, 400, 600 and 800 rpm are conducted on both pressure side (trailing wall) and suction side (leading wall) with the blowing ratio varying from 0.14 to 3.5. The effects of blowing ratio, Reynolds number (ReD) and rotation number are mainly analyzed according to film coverage and film cooling effectiveness. The results show that the film performance firstly increases then decreases with the rising of blowing ratio, the optimal blowing ratio is about M=0.5. The film cooling performance is improved with higher Reynolds number (ReD). Under the rotation condition, the film trajectory has an obvious centrifugal deflection which can be enhanced by higher rotation number on the pressure side, and the film deflection moves a little centripetally on the suction side. The film cooling effectiveness on the suction side increases with the rising of rotation number and it is higher than that on the pressure side.
Skip Nav Destination
ASME Turbo Expo 2015: Turbine Technical Conference and Exposition
June 15–19, 2015
Montreal, Quebec, Canada
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-5672-7
PROCEEDINGS PAPER
Experimental Study of Sister Hole Film Cooling Performance in a Rotating Flat Plate Model
Huichuan Cheng,
Huichuan Cheng
Beihang University, Beijing, China
Search for other works by this author on:
Shuiting Ding
Shuiting Ding
Beihang University, Beijing, China
Search for other works by this author on:
Hong Wu
Beihang University, Beijing, China
Huichuan Cheng
Beihang University, Beijing, China
Yulong Li
Tsinghua University, Beijing, China
Shuiting Ding
Beihang University, Beijing, China
Paper No:
GT2015-42188, V05BT12A006; 12 pages
Published Online:
August 12, 2015
Citation
Wu, H, Cheng, H, Li, Y, & Ding, S. "Experimental Study of Sister Hole Film Cooling Performance in a Rotating Flat Plate Model." Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. Volume 5B: Heat Transfer. Montreal, Quebec, Canada. June 15–19, 2015. V05BT12A006. ASME. https://doi.org/10.1115/GT2015-42188
Download citation file:
38
Views
Related Proceedings Papers
Related Articles
An Experimental Investigation of Film Cooling on a Turbine Rotor Blade
J. Eng. Power (January,1980)
Related Chapters
Investigation of Some Problems In Developing Standards for Precracked Charpy Slow Bend Tests
Developments in Fracture Mechanics Test Methods Standardization
Discovering Similar Segments by Time-Parameterized Trajectory Clustering
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Studies Performed
Closed-Cycle Gas Turbines: Operating Experience and Future Potential