Measured rotordynamic coefficients are presented for a flexure-pivot-pad journal bearing (FPJB) in a load-between-pad configuration with: (1) an active, and (2) locked integral squeeze film damper (ISFD). Prior rotordynamic-coefficient test results have been presented for FPJBs (alone), and rotor-response results have been presented for rotors supported by FPJBS with ISFDs; however, these are the first rotordynamic-coefficient test results for FPJBs with ISFDs.
A multi-frequency dynamic testing regime is employed. For both bearing configurations, quadratic curve fits provide good representation of the real portions of the dynamic-stiffness coefficients yielding a direct stiffness and a direct added-mass coefficient. The imaginary portions are well represented by linear curve fits, implying constant, frequency-independent direct-damping coefficients. Direct stiffness coefficients are ∼50% lower for the active-damper configuration, and direct damping coefficients are only modestly lower. The combination of ∼50% reduction in direct stiffness with a modest drop in direct damping indicates a very effective squeeze-film damper application.
Added-mass coefficients are normally lower for the active-damper configuration, and all coefficient trends (for changes in loading and shaft speed) are “flatter” for the active flexure pivot-pad damper bearing. The measured rotordynamic coefficients are used to calculate the whirl frequency ratio and indicate high stability for both bearing configurations.
